openstudio-load-flexibility-measures 0.3.1 → 0.5.0

data/lib/measures/add_central_ice_storage/measure.rb

@@ -1,1324 +1,1325 @@
-# *******************************************************************************
-# OpenStudio(R), Copyright (c) 2008-2020, Alliance for Sustainable Energy, LLC.
-# All rights reserved.
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#
-# (1) Redistributions of source code must retain the above copyright notice,
-# this list of conditions and the following disclaimer.
-#
-# (2) Redistributions in binary form must reproduce the above copyright notice,
-# this list of conditions and the following disclaimer in the documentation
-# and/or other materials provided with the distribution.
-#
-# (3) Neither the name of the copyright holder nor the names of any contributors
-# may be used to endorse or promote products derived from this software without
-# specific prior written permission from the respective party.
-#
-# (4) Other than as required in clauses (1) and (2), distributions in any form
-# of modifications or other derivative works may not use the "OpenStudio"
-# trademark, "OS", "os", or any other confusingly similar designation without
-# specific prior written permission from Alliance for Sustainable Energy, LLC.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND ANY CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER(S), ANY CONTRIBUTORS, THE
-# UNITED STATES GOVERNMENT, OR THE UNITED STATES DEPARTMENT OF ENERGY, NOR ANY OF
-# THEIR EMPLOYEES, BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
-# OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# *******************************************************************************
-
-# Measure distributed under NREL Copyright terms, see LICENSE.md file.
-
-# Author: Karl Heine
-# Date: June 2019 - July 2020
-# Additional Code Added to Test Ice Performance for Demand Response Events: September 2019
-# Revised February 2020
-
-# References:
-# => ASHRAE Handbook, HVAC Systems and Equipment, Chapter 51: Thermal storage, 2016
-# => ASHRAE Design Guide for Cool Thermal Storage, 2nd Edition, January 2019
-# => Manufacturer marketing materials, available online
-
-# load OpenStudio measure libraries
-require "#{File.dirname(__FILE__)}/resources/OsLib_Schedules"
-
-# start the measure
-class AddCentralIceStorage < OpenStudio::Measure::ModelMeasure
-  # human readable name
-  def name
-    # Measure name should be the title case of the class name.
-    'Add Central Ice Storage'
-  end
-
-  # human readable description
-  def description
-    'This measure adds an ice storage tank to a chilled water loop for the purpose of thermal energy storage.'
-  end
-
-  # human readable description of modeling approach
-  def modeler_description
-    'This measure adds the necessary components and performs required model articulations to add an ice ' \
-            'thermal storage tank (ITS) to an existing chilled water loop. Special consideration is given to ' \
-            'implementing configuration and control options. Refer to the ASHRAE CTES Design Guide or manufacturer ' \
-            'applications guides for detailed implementation info. A user guide document is included in the docs ' \
-            'folder of this measure to help translate design objectives into measure argument input values.'
-  end
-
-  # define the arguments that the user will input
-  def arguments(model)
-    args = OpenStudio::Measure::OSArgumentVector.new
-
-    # Make choice argument for energy storage objective
-    objective = OpenStudio::Measure::OSArgument.makeChoiceArgument('objective', ['Full Storage', 'Partial Storage'], true)
-    objective.setDisplayName('Select Energy Storage Objective:')
-    objective.setDefaultValue('Partial Storage')
-    args << objective
-
-    # Make choice argument for component layout
-    upstream = OpenStudio::Measure::OSArgument.makeChoiceArgument('upstream', ['Chiller', 'Storage'])
-    upstream.setDisplayName('Select Upstream Device:')
-    upstream.setDescription('Partial Storage Only. See documentation for control implementation.')
-    upstream.setDefaultValue('Chiller')
-    args << upstream
-
-    # Make double argument for thermal energy storage capacity
-    storage_capacity = OpenStudio::Measure::OSArgument.makeDoubleArgument('storage_capacity', true)
-    storage_capacity.setDisplayName('Enter Thermal Energy Storage Capacity for Ice Tank [ton-hours]:')
-    storage_capacity.setDefaultValue(2000)
-    args << storage_capacity
-
-    # Make choice argument for ice melt process indicator
-    melt_indicator = OpenStudio::Measure::OSArgument.makeChoiceArgument('melt_indicator', ['InsideMelt', 'OutsideMelt'], true)
-    melt_indicator.setDisplayName('Select Thaw Process Indicator for Ice Storage:')
-    melt_indicator.setDescription('')
-    melt_indicator.setDefaultValue('InsideMelt')
-    args << melt_indicator
-
-    # Make list of chilled water loop(s) from which user can select
-    plant_loops = model.getPlantLoops
-    loop_choices = OpenStudio::StringVector.new
-    plant_loops.each do |loop|
-      if loop.sizingPlant.loopType.to_s == 'Cooling'
-        loop_choices << loop.name.to_s
-      end
-    end
-
-    # Make choice argument for loop selection
-    selected_loop = OpenStudio::Measure::OSArgument.makeChoiceArgument('selected_loop', loop_choices, true)
-    selected_loop.setDisplayName('Select Loop:')
-    selected_loop.setDescription('This is the cooling loop on which the ice tank will be added.')
-    if loop_choices.include?('Chilled Water Loop')
-      selected_loop.setDefaultValue('Chilled Water Loop')
-    else
-      selected_loop.setDescription('Error: No Cooling Loop Found')
-    end
-    args << selected_loop
-
-    # Make list of available chillers from which the user can select
-    chillers = model.getChillerElectricEIRs
-    chillers += model.getChillerAbsorptions
-    chillers += model.getChillerAbsorptionIndirects
-    chiller_choices = OpenStudio::StringVector.new
-    chillers.each do |chill|
-      chiller_choices << chill.name.to_s
-    end
-
-    # Make choice argument for chiller selection
-    selected_chiller = OpenStudio::Measure::OSArgument.makeChoiceArgument('selected_chiller', chiller_choices, true)
-    selected_chiller.setDisplayName('Select Chiller:')
-    selected_chiller.setDescription('The ice tank will be placed in series with this chiller.')
-    if !chillers.empty?
-      selected_chiller.setDefaultValue(chiller_choices[0])
-    else
-      selected_chiller.setDescription('Error: No Chiller Found')
-    end
-    args << selected_chiller
-
-    # Make double argument for ice chiller resizing factor - relative to selected chiller capacity
-    chiller_resize_factor = OpenStudio::Measure::OSArgument.makeDoubleArgument('chiller_resize_factor', false)
-    chiller_resize_factor.setDisplayName('Enter Chiller Sizing Factor:')
-    chiller_resize_factor.setDefaultValue(0.75)
-    args << chiller_resize_factor
-
-    # Make double argument for chiller max capacity limit during ice discharge
-    chiller_limit = OpenStudio::Measure::OSArgument.makeDoubleArgument('chiller_limit', false)
-    chiller_limit.setDisplayName('Enter Chiller Max Capacity Limit During Ice Discharge:')
-    chiller_limit.setDescription('Enter as a fraction of chiller capacity (0.0 - 1.0).')
-    chiller_limit.setDefaultValue(1.0)
-    args << chiller_limit
-
-    # Make choice argument for schedule options
-    old = OpenStudio::Measure::OSArgument.makeBoolArgument('old', false)
-    old.setDisplayName('Use Existing (Pre-Defined) Temperature Control Schedules')
-    old.setDescription('Use drop-down selections below.')
-    old.setDefaultValue(false)
-    args << old
-
-    # Find All Existing Schedules with Type Limits of "Temperature"
-    sched_options = []
-    sched_options2 = []
-    all_scheds = model.getSchedules
-    all_scheds.each do |sched|
-      sched.to_ScheduleBase.get
-      unless sched.scheduleTypeLimits.empty?
-        if sched.scheduleTypeLimits.get.unitType.to_s == 'Temperature'
-          sched_options << sched.name.to_s
-        elsif sched.scheduleTypeLimits.get.unitType.to_s == 'Availability' ||
-              sched.scheduleTypeLimits.get.unitType.to_s == 'OnOff'
-          sched_options2 << sched.name.to_s
-        end
-      end
-    end
-    sched_options = ['N/A'] + sched_options.sort
-    sched_options2 = ['N/A'] + sched_options2.sort
-
-    # Create choice argument for ice availability schedule (old = true)
-    ctes_av = OpenStudio::Measure::OSArgument.makeChoiceArgument('ctes_av', sched_options2, false)
-    ctes_av.setDisplayName('Select Pre-Defined Ice Availability Schedule')
-    if sched_options2.empty?
-      ctes_av.setDescription('Warning: No availability schedules found')
-    end
-    ctes_av.setDefaultValue('N/A')
-    args << ctes_av
-
-    # Create choice argument for ice tank component setpoint sched (old = true)
-    ctes_sch = OpenStudio::Measure::OSArgument.makeChoiceArgument('ctes_sch', sched_options, false)
-    ctes_sch.setDisplayName('Select Pre-Defined Ice Tank Component Setpoint Schedule')
-    if sched_options.empty?
-      ctes_sch.setDescription('Warning: No temperature setpoint schedules found')
-    end
-    ctes_sch.setDefaultValue('N/A')
-    args << ctes_sch
-
-    # Create choice argument for chiller component setpoint sched (old = true)
-    chill_sch = OpenStudio::Measure::OSArgument.makeChoiceArgument('chill_sch', sched_options, false)
-    chill_sch.setDisplayName('Select Pre-Defined Chiller Component Setpoint Schedule')
-    if sched_options.empty?
-      chill_sch.setDescription('Warning: No temperature setpoint schedules found')
-    end
-    chill_sch.setDefaultValue('N/A')
-    args << chill_sch
-
-    # Make bool argument for creating new schedules
-    new = OpenStudio::Measure::OSArgument.makeBoolArgument('new', false)
-    new.setDisplayName('Create New (Simple) Temperature Control Schedules')
-    new.setDescription('Use entry fields below. If Pre-Defined is also selected, these new schedules will be created' \
-                       ' but not applied.')
-    new.setDefaultValue(true)
-    args << new
-
-    # Make double argument for loop setpoint temperature
-    loop_sp = OpenStudio::Measure::OSArgument.makeDoubleArgument('loop_sp', true)
-    loop_sp.setDisplayName('Loop Setpoint Temperature F:')
-    loop_sp.setDescription('This value replaces the existing loop temperature setpoint manager; the old manager will ' \
-                           'be disconnected but not deleted from the model.')
-    loop_sp.setDefaultValue(44)
-    args << loop_sp
-
-    # Make double argument for ice chiller outlet temp during partial storage operation
-    inter_sp = OpenStudio::Measure::OSArgument.makeDoubleArgument('inter_sp', false)
-    inter_sp.setDisplayName('Enter Intermediate Setpoint for Upstream Cooling Device During Ice Discharge F:')
-    inter_sp.setDescription('Partial storage only')
-    inter_sp.setDefaultValue(47)
-    args << inter_sp
-
-    # Make double argument for loop temperature for ice charging
-    chg_sp = OpenStudio::Measure::OSArgument.makeDoubleArgument('chg_sp', true)
-    chg_sp.setDisplayName('Ice Charging Setpoint Temperature F:')
-    chg_sp.setDefaultValue(25)
-    args << chg_sp
-
-    # Make double argument for loop design delta T
-    delta_t = OpenStudio::Measure::OSArgument.makeStringArgument('delta_t', true)
-    delta_t.setDisplayName('Loop Design Temperature Difference F:')
-    delta_t.setDescription('Enter numeric value to adjust selected loop settings.')
-    delta_t.setDefaultValue('Use Existing Loop Value')
-    args << delta_t
-
-    # Make string argument for ctes seasonal availabilty
-    ctes_season = OpenStudio::Measure::OSArgument.makeStringArgument('ctes_season', true)
-    ctes_season.setDisplayName('Enter Seasonal Availabity of Ice Storage:')
-    ctes_season.setDescription('Use MM/DD-MM/DD format')
-    ctes_season.setDefaultValue('01/01-12/31')
-    args << ctes_season
-
-    # Make string arguments for ctes discharge times
-    discharge_start = OpenStudio::Measure::OSArgument.makeStringArgument('discharge_start', true)
-    discharge_start.setDisplayName('Enter Starting Time for Ice Discharge:')
-    discharge_start.setDescription('Use 24 hour format (HR:MM)')
-    discharge_start.setDefaultValue('08:00')
-    args << discharge_start
-
-    discharge_end = OpenStudio::Measure::OSArgument.makeStringArgument('discharge_end', true)
-    discharge_end.setDisplayName('Enter End Time for Ice Discharge:')
-    discharge_end.setDescription('Use 24 hour format (HR:MM)')
-    discharge_end.setDefaultValue('21:00')
-    args << discharge_end
-
-    # Make string arguments for ctes charge times
-    charge_start = OpenStudio::Measure::OSArgument.makeStringArgument('charge_start', true)
-    charge_start.setDisplayName('Enter Starting Time for Ice charge:')
-    charge_start.setDescription('Use 24 hour format (HR:MM)')
-    charge_start.setDefaultValue('23:00')
-    args << charge_start
-
-    charge_end = OpenStudio::Measure::OSArgument.makeStringArgument('charge_end', true)
-    charge_end.setDisplayName('Enter End Time for Ice charge:')
-    charge_end.setDescription('Use 24 hour format (HR:MM)')
-    charge_end.setDefaultValue('07:00')
-    args << charge_end
-
-    # Make boolean arguments for ctes dischage days
-    wknds = OpenStudio::Measure::OSArgument.makeBoolArgument('wknds', true)
-    wknds.setDisplayName('Allow Ice Discharge on Weekends')
-    wknds.setDefaultValue(false)
-    args << wknds
-
-    # Make choice argument for output variable reporting frequency
-    report_choices = ['Detailed', 'Timestep', 'Hourly', 'Daily', 'Monthly', 'RunPeriod']
-    report_freq = OpenStudio::Measure::OSArgument.makeChoiceArgument('report_freq', report_choices, false)
-    report_freq.setDisplayName('Select Reporting Frequency for New Output Variables')
-    report_freq.setDescription('This will not change reporting frequency for existing output variables in the model.')
-    report_freq.setDefaultValue('Timestep')
-    args << report_freq
-
-    ## DR TESTER INPUTS -----------------------------------------
-    # Make boolean argument for use of demand response event test
-    dr = OpenStudio::Measure::OSArgument.makeBoolArgument('dr', false)
-    dr.setDisplayName('Test Demand Reponse Event')
-    dr.setDefaultValue(false)
-    args << dr
-
-    # Make choice argument for type of demand response event (add or shed)
-    dr_add_shed = OpenStudio::Measure::OSArgument.makeChoiceArgument('dr_add_shed', ['Add', 'Shed'], false)
-    dr_add_shed.setDisplayName('Select if a Load Add or Load Shed Event')
-    dr_add_shed.setDefaultValue('Shed')
-    args << dr_add_shed
-
-    # Make string argument for DR event date
-    dr_date = OpenStudio::Measure::OSArgument.makeStringArgument('dr_date', false)
-    dr_date.setDisplayName('Enter date of demand response event:')
-    dr_date.setDescription('Use MM/DD format.')
-    dr_date.setDefaultValue('9/19')
-    args << dr_date
-
-    # Make string argument for DR Event time
-    dr_time = OpenStudio::Measure::OSArgument.makeStringArgument('dr_time', false)
-    dr_time.setDisplayName('Enter start time of demand response event:')
-    dr_time.setDescription('Use 24 hour format (HR:MM)')
-    dr_time.setDefaultValue('11:30')
-    args << dr_time
-
-    # Make double argument for DR event duration
-    dr_dur = OpenStudio::Measure::OSArgument.makeDoubleArgument('dr_dur', false)
-    dr_dur.setDisplayName('Enter duration of demand response event [hr]:')
-    dr_dur.setDefaultValue(3)
-    args << dr_dur
-
-    # Make boolean argument for allowing chiller to back-up ice
-    dr_chill = OpenStudio::Measure::OSArgument.makeBoolArgument('dr_chill', false)
-    dr_chill.setDisplayName('Allow chiller to back-up ice during DR event')
-    dr_chill.setDescription('Unselection may result in unmet cooling hours')
-    dr_chill.setDefaultValue('false')
-    args << dr_chill
-    ## END DR TESTER INPUTS --------------------------------------
-
-    args
-  end
-
-  # define what happens when the measure is run
-  def run(model, runner, user_arguments)
-    super(model, runner, user_arguments)
-
-    # use the built-in error checking
-    unless runner.validateUserArguments(arguments(model), user_arguments)
-      return false
-    end
-
-    ## Arguments and Declarations---------------------------------------------------------------------------------------
-    # Assign user arguments to variables
-    objective = runner.getStringArgumentValue('objective', user_arguments)
-    upstream = runner.getStringArgumentValue('upstream', user_arguments)
-    storage_capacity = runner.getDoubleArgumentValue('storage_capacity', user_arguments)
-    melt_indicator = runner.getStringArgumentValue('melt_indicator', user_arguments)
-    selected_loop = runner.getStringArgumentValue('selected_loop', user_arguments)
-    selected_chiller = runner.getStringArgumentValue('selected_chiller', user_arguments)
-    chiller_resize_factor = runner.getDoubleArgumentValue('chiller_resize_factor', user_arguments)
-    chiller_limit = runner.getDoubleArgumentValue('chiller_limit', user_arguments)
-    old = runner.getBoolArgumentValue('old', user_arguments)
-    ctes_av = runner.getStringArgumentValue('ctes_av', user_arguments)
-    ctes_sch = runner.getStringArgumentValue('ctes_sch', user_arguments)
-    chill_sch = runner.getStringArgumentValue('chill_sch', user_arguments)
-    new = runner.getBoolArgumentValue('new', user_arguments)
-    loop_sp = runner.getDoubleArgumentValue('loop_sp', user_arguments)
-    inter_sp = runner.getDoubleArgumentValue('inter_sp', user_arguments)
-    chg_sp = runner.getDoubleArgumentValue('chg_sp', user_arguments)
-    delta_t = runner.getStringArgumentValue('delta_t', user_arguments)
-    ctes_season = runner.getStringArgumentValue('ctes_season', user_arguments)
-    discharge_start = runner.getStringArgumentValue('discharge_start', user_arguments)
-    discharge_end = runner.getStringArgumentValue('discharge_end', user_arguments)
-    charge_start = runner.getStringArgumentValue('charge_start', user_arguments)
-    charge_end = runner.getStringArgumentValue('charge_end', user_arguments)
-    wknds = runner.getBoolArgumentValue('wknds', user_arguments)
-    report_freq = runner.getStringArgumentValue('report_freq', user_arguments)
-
-    ## DR TESTER INPUTS ----------------------------------
-    dr = runner.getBoolArgumentValue('dr', user_arguments)
-    dr_add_shed = runner.getStringArgumentValue('dr_add_shed', user_arguments)
-    (dr_mon, dr_day) = runner.getStringArgumentValue('dr_date', user_arguments).split('/')
-    (dr_hr, dr_min) = runner.getStringArgumentValue('dr_time', user_arguments).split(':')
-    dr_dur = runner.getDoubleArgumentValue('dr_dur', user_arguments)
-    dr_chill = runner.getBoolArgumentValue('dr_chill', user_arguments)
-    dr_time = (dr_hr.to_f + (dr_min.to_f / 60)).round(2)
-    ## END DR TESTER INPUTS ------------------------------
-
-    # Declare useful variables with values set within do-loops
-    cond_loop = ''
-    ctes_sp_sched = ''
-    ctes_setpoint = 99.0 # This is a flag value and should be overwritten later
-    demand_sp_mgr = ''
-
-    ## Validate User Inputs---------------------------------------------------------------------------------------------
-
-    # Convert thermal storage capacity from ton-hours to GJ
-    storage_capacity = 12_660_670.23144e-9 * storage_capacity
-
-    # Check for existence of charging setpoint temperature, reset to default if left blank.
-    if chg_sp.nil? || chg_sp >= 32.0
-      runner.registerWarning('An invalid ice charging temperature was entered. Value reset to -3.88 C (25.0 F).')
-      chg_sp = 25.0
-    elsif chg_sp < 20.0
-      runner.registerWarning('The ice charging temperature is set below 20 F; this is atypically low. Verify input.')
-    end
-
-    # Convert setpoint temperature inputs from F to C
-    loop_sp = (loop_sp - 32.0) / 1.8
-    inter_sp = (inter_sp - 32.0) / 1.8
-    chg_sp = (chg_sp - 32.0) / 1.8
-
-    # Check if both old and new are false, set new = true and report error
-    if !old && !new
-      runner.registerError('No CTES schedule option was selected; either use old schedules or the create new option. ' \
-                           'Measure aborted.')
-      return false
-    end
-
-    # Locate selected chiller and verify loop connection
-    if !model.getChillerElectricEIRByName(selected_chiller).empty?
-      ctes_chiller = model.getChillerElectricEIRByName(selected_chiller).get
-    elsif !model.getChillerAbsorptionByName(selected_chiller).empty?
-      ctes_chiller = model.getChillerAbsorptionByName(selected_chiller).get
-    elsif !model.getChillerAbsorptionIndirectByName(selected_chiller).empty?
-      ctes_chiller = model.getChillerAbsorptionIndirectByName(selected_chiller).get
-    end
-
-    ctes_loop = model.getModelObjectByName(selected_loop).get.to_PlantLoop.get
-
-    unless ctes_loop.components.include?(ctes_chiller)
-      runner.registerError('The selected chiller is not located on the selected chilled water loop. Measure aborted.')
-      return false
-    end
-
-    # Convert Delta T if needed from F to C (Overwrites string variables as floats)
-    if delta_t != 'Use Existing Loop Value' && delta_t.to_f != 0.0
-      delta_t = delta_t.to_f / 1.8
-    else
-      # Could add additional checks here for invalid (non-numerical) entries
-      delta_t = ctes_loop.sizingPlant.loopDesignTemperatureDifference
-    end
-
-    # Check chiller limit input values
-    if chiller_limit > 1.0
-      runner.registerWarning('Chiller limit must be a ratio less than 1. Limit set to 1.0.')
-      chiller_limit = 1.0
-    elsif chiller_limit < 0
-      runner.registerWarning('Chiller limit must be a ratio greater than or equal to 0. Limit set to 0.0' \
-                              ' (i.e. full storage).')
-      chiller_limit = 0.0
-    elsif chiller_limit < 0.15
-      runner.registerInfo('Chiller limit is below 15%; this may be outside the reasonable part load operating " \
-                          "window for the device. Consider increasing or setting to 0.')
-    end
-
-    # Convert chiller limit to a temperature value based on delta_t variable if != 1. Otherwise, use as flag for EMS
-    if chiller_limit != 1.0
-      dt_max = chiller_limit * delta_t # degrees C
-      runner.registerInfo("Max chiller dT during ice discharge is set to: #{dt_max.round(2)} C " \
-                          "(#{(dt_max * 1.8).round(2)} F).")
-    else
-      dt_max = delta_t
-    end
-
-    # Check limits of chiller performance curves and adjust if necessary - Notify user with WARNING
-    curve_output_check = false
-    cap_ft = ctes_chiller.coolingCapacityFunctionOfTemperature
-    min_x = cap_ft.minimumValueofx.to_f
-    if min_x > chg_sp
-      cap_ft.setMinimumValueofx(chg_sp)
-      runner.registerWarning("VERIFY CURVE VALIDITY: The input range for the '#{cap_ft.name}' curve is too " \
-                            'restrictive for use with ice charging. The provided curve has been ' \
-                            "extrapolated to a lower limit of #{chg_sp.round(2)} C for the 'x' variable.")
-      curve_output_check = true
-    end
-
-    eir_ft = ctes_chiller.electricInputToCoolingOutputRatioFunctionOfTemperature
-    min_x = eir_ft.minimumValueofx.to_f
-    if min_x > chg_sp
-      runner.registerWarning("VERIFY CURVE VALIDITY: The input range for the '#{eir_ft.name}' curve is too " \
-                            'restrictive for use with ice charging. The provided curve has been ' \
-                            "extrapolated to a lower limit of #{chg_sp.round(2)} C for the 'x' variable.")
-    end
-
-    # Report chiller performance derate at the ice-making conditions.
-    if curve_output_check == true
-      derate = cap_ft.evaluate(chg_sp, ctes_chiller.referenceEnteringCondenserFluidTemperature)
-      runner.registerInfo('A curve extrapolation warning was registered for the chiller capacity as a function ' \
-                          'of temperature curve. At normal ice making temperatures, a chiller derate to 60-70% ' \
-                          'of nominal capacity is expected. Using a condenser entering water temperature of ' \
-                          "#{ctes_chiller.referenceEnteringCondenserFluidTemperature.round(1)} C and the ice " \
-                          "charging temperature of #{chg_sp.round(1)} C, a derate to #{(derate * 100).round(1)}% is " \
-                          'returned. This value will increase with lower condenser fluid return temperatures.')
-    end
-
-    # Check to ensure schedules are selected if old = true
-    if old
-      if ctes_av == 'N/A'
-        runner.registerError('Pre-Defined schedule option chosen, but no availabity schedule was selected.')
-        runner.registerWarning('Measure terminated early; no storage was applied.')
-        return false
-      end
-      if ctes_sch == 'N/A'
-        runner.registerError('Pre-Defined schedule option chosen, but no ice tank setpoint schedule was selected.')
-        runner.registerWarning('Measure terminated early; no storage was applied.')
-        return false
-      end
-      if chill_sch == 'N/A'
-        runner.registerError('Pre-Defined schedule option chosen, but no chiller setpoint schedule was selected.')
-        runner.registerWarning('Measure terminated early; no storage was applied.')
-        return false
-      end
-    end
-
-    # Parse and verify schedule inputs
-    # Remove potential spaces from date inputs
-    ctes_season = ctes_season.delete(' ')
-
-    # Convert HR:MM format into HR.fraction format
-    (d_start_hr, d_start_min) = discharge_start.split(':')
-    (d_end_hr, d_end_min) = discharge_end.split(':')
-    (c_start_hr, c_start_min) = charge_start.split(':')
-    (c_end_hr, c_end_min) = charge_end.split(':')
-
-    # Store re-formatted time values in shorthand variables for use in schedule
-    # building
-    ds = (d_start_hr.to_f + d_start_min.to_f / 60).round(2)
-    de = (d_end_hr.to_f + d_end_min.to_f / 60).round(2)
-    cs = (c_start_hr.to_f + c_start_min.to_f / 60).round(2)
-    ce = (c_end_hr.to_f + c_end_min.to_f / 60).round(2)
-
-    # Verify that input times make sense
-    if ds > de
-      runner.registerWarning('Dischage start time is later than discharge ' \
-                             'end time (your ice will discharge overnight). ' \
-                             'Verify schedule inputs.')
-    end
-
-    if cs.between?(ds - 0.01, de + 0.01) || ce.between?(ds - 0.01, de + 0.01)
-      runner.registerWarning('The tank charge and discharge periods overlap. ' \
-                             'Examine results for unexpected operation; ' \
-                             'verify schedule inputs.')
-    end
-
-    if [ds, de, cs, ce].any? { |i| i > 24 }
-      runner.registerError('One of you time enteries exceeds 24:00, ' \
-                           'resulting in a schedule error. Measure aborted.')
-      return false
-    end
-
-    ## Report Initial Condition of the Model----------------------------------------------------------------------------
-    total_storage = model.getThermalStorageIceDetaileds.size
-    runner.registerInitialCondition("The model started with #{total_storage} ice storage device(s).")
-
-    runner.registerInfo("Chiller '#{selected_chiller}' on Loop '#{selected_loop}' was selected for the addition " \
-                        "of a #{storage_capacity.round(2)} GJ (#{(storage_capacity / 12_660_670.23144e-9).round(0)} " \
-                        'ton-hours) ice thermal energy storage object.')
-
-    ## Modify Chiller Settings------------------------------------------------------------------------------------------
-
-    # Adjust ctes chiller minimum outlet temperature
-    ctes_chiller.setLeavingChilledWaterLowerTemperatureLimit(chg_sp)
-    runner.registerInfo("Selected chiller minimum setpoint temperature was adjusted to #{chg_sp.round(2)} C " \
-                        "(#{(chg_sp * 1.8) + 32} F).")
-
-    # Adjust ctes chiller sizing factor based on user input
-    if ctes_chiller.isReferenceCapacityAutosized
-      ctes_chiller.setSizingFactor(chiller_resize_factor)
-      runner.registerInfo("Selected chiller has been resized to #{chiller_resize_factor * 100}% of autosized " \
-                          'capacity.')
-    else
-      ctes_chiller.setReferenceCapacity(
-        chiller_resize_factor * ctes_chiller.referenceCapacity.to_f
-      )
-      runner.registerInfo("Selected chiller has been resized to #{chiller_resize_factor * 100}% of original " \
-                          '(hardsized) capacity.')
-    end
-
-    ## Modify Loop Settings---------------------------------------------------------------------------------------------
-
-    # Adjust minimum loop temperature
-    ctes_loop.setMinimumLoopTemperature(chg_sp)
-    runner.registerInfo("Selected loop minimum temperature was adjusted to #{chg_sp.round(2)} C " \
-                        "(#{(chg_sp * 1.8) + 32} F).")
-
-    # Adjust plant load distribution scheme
-    if ctes_loop.loadDistributionScheme != 'SequentialLoad'
-      ctes_loop.setLoadDistributionScheme('SequentialLoad')
-      runner.registerInfo("Selected loop load distribution scheme was set to 'SequentialLoad'.")
-    end
-
-    # Adjust loop design temperature difference
-    if ctes_loop.sizingPlant.loopDesignTemperatureDifference.to_f != delta_t
-      ctes_loop.sizingPlant.setLoopDesignTemperatureDifference(delta_t)
-      runner.registerInfo("Selected loop design temperature difference was adjusted to #{delta_t.round(2)} C " \
-                          "(#{(delta_t * 1.8)} F).")
-    end
-
-    # Adjust loop gylcol solution percentage and set glycol - if necessary
-    if ctes_loop.fluidType == 'Water'
-      ctes_loop.setFluidType('EthyleneGlycol')
-      ctes_loop.setGlycolConcentration(25)
-      runner.registerInfo('Selected loop working fluid changed to ethylene glycol at a 25% concentration.')
-    elsif ctes_loop.glycolConcentration < 25
-      runner.registerInfo('Selected loop gylycol concentration is less than 25%. Consider increasing to 25-30%.')
-    end
-
-    # Adjust loop to two-way common pipe simulation - if necessary
-    if ctes_loop.commonPipeSimulation != 'TwoWayCommonPipe'
-      ctes_loop.setCommonPipeSimulation('TwoWayCommonPipe')
-      runner.registerInfo("Selected loop common pipe simulation changed to 'TwoWayCommonPipe'.")
-
-      # Add setpoint manager at inlet of demand loop (req'd for two-way common pipe sim.)
-      if old # Only applies if old curves are used, regardless of whether new curves are created (old takes precedence)
-        loop_sp_node = ctes_loop.loopTemperatureSetpointNode
-        loop_sp_mgrs = loop_sp_node.setpointManagers
-        loop_sp_mgrs.each do |spm|
-          if spm.controlVariable == 'Temperature'
-            demand_sp_mgr = spm.clone.to_SetpointManagerScheduled.get
-          end
-        end
-        demand_sp_mgr.addToNode(ctes_loop.demandInletNode)
-        runner.registerInfo('Original loop temperature setpoint manager duplicated and added to demand loop inlet node.')
-      end
-
-    end
-
-    ## Create CTES Hardware---------------------------------------------------------------------------------------------
-
-    # Create ice tank (aka ctes)
-    ctes = OpenStudio::Model::ThermalStorageIceDetailed.new(model)
-    ctes.setCapacity(storage_capacity)
-    ctes.setThawProcessIndicator(melt_indicator)
-
-    # Add ice tank to loop based on user-selected objective option and upstream device
-    if objective == 'Full Storage'
-      # Full storage places the ice tank upstream of the chiller with no user option to change.
-      ctes.addToNode(ctes_chiller.supplyInletModelObject.get.to_Node.get)
-    elsif objective == 'Partial Storage' && upstream == 'Storage'
-      ctes.addToNode(ctes_chiller.supplyInletModelObject.get.to_Node.get)
-    elsif objective == 'Partial Storage' && upstream == 'Chiller'
-      ctes.addToNode(ctes_chiller.supplyOutletModelObject.get.to_Node.get)
-    end
-
-    ## Create New Schedules if Necessary--------------------------------------------------------------------------------
-    #-------------------------------------------------------------------------------------------------------------------
-    if new
-      ## Check for Schedule Type Limits and Create if Needed------------------------------------------------------------
-      if model.getModelObjectByName('OnOff').get.initialized
-        sched_limits_onoff = model.getModelObjectByName('OnOff').get.to_ScheduleTypeLimits.get
-      else
-        sched_limits_onoff = OpenStudio::Model::ScheduleTypeLimits.new(model)
-        sched_limits_onoff.setName('OnOff')
-        sched_limits_onoff.setNumericType('Discrete')
-        sched_limits_onoff.setUnitType('Availability')
-        sched_limits_onoff.setLowerLimitValue(0.0)
-        sched_limits_onoff.setUpperLimitValue(1.0)
-      end
-
-      if model.getModelObjectByName('Temperature').get.initialized
-        sched_limits_temp = model.getModelObjectByName('Temperature').get.to_ScheduleTypeLimits.get
-        if sched_limits_temp.lowerLimitValue.to_f > chg_sp
-          sched_limits_temp.setLowerLimitValue(chg_sp)
-        end
-      else
-        sched_limits_temp = OpenStudio::Model::ScheduleTypeLimits.new(model)
-        sched_limits_temp.setName('Temperature')
-        sched_limits_temp.setNumericType('Continuous')
-        sched_limits_temp.setUnitType('Temperature')
-      end
-
-      ## Create Schedules-----------------------------------------------------------------------------------------------
-
-      # Create key-value sets based on user inputs for charge/discharge times
-      # cs = charge start, ce = charge end, ds = discharge start, de = discharge end
-
-      # Set chiller and ice discharge setpoints for partial storage configs
-      if objective == 'Full Storage'
-        chiller_setpoint = loop_sp
-        ctes_setpoint = loop_sp
-      elsif objective == 'Partial Storage'
-        if upstream == 'Chiller'
-          chiller_setpoint = inter_sp
-          ctes_setpoint = loop_sp
-        elsif upstream == 'Storage'
-          chiller_setpoint = loop_sp
-          ctes_setpoint = inter_sp
-        end
-      end
-
-      # Handle overnight charging and discharging
-      if ce < cs
-        midnight_av = [24, 1]
-        midnight_chiller = [24, chg_sp]
-        midnight_ctes = [24, loop_sp]
-      elsif de < ds
-        midnight_av = [24, 1]
-        midnight_chiller = [24, chiller_setpoint]
-        midnight_ctes = [24, ctes_setpoint]
-      else
-        midnight_av = [24, 0]
-        midnight_chiller = [24, loop_sp]
-        midnight_ctes = [24, 99]
-      end
-
-      # Availablity k-v sets for CTES
-      wk_av = [[cs, 0], [ce, 1], [ds, 0], [de, 1], midnight_av].sort
-      wknd_av = [[cs, 0], [ce, 1], midnight_av].sort
-
-      # Temperature k-v sets for CTES
-      wk_ctes = [[cs, 99], [ce, loop_sp], [ds, 99], [de, ctes_setpoint], midnight_ctes].sort
-      wknd_ctes = [[cs, 99], [ce, loop_sp], midnight_ctes].sort
-
-      # Temperature k-v set for Chiller
-      wk_chiller = [[cs, loop_sp], [ce, chg_sp], [ds, loop_sp], [de, chiller_setpoint], midnight_chiller].sort
-      wknd_chiller = [[cs, loop_sp], [ce, chg_sp], midnight_chiller].sort
-
-      # Apply weekends modifer if necessary
-      if wknds
-        wknd_av = wk_av
-        wknd_ctes = wk_ctes
-        wknd_chiller = wk_chiller
-      end
-
-      # Create ice availability schedule
-      ruleset_name = 'Ice Availability Schedule (New)'
-      winter_design_day = [[24, 0]]
-      summer_design_day = wk_av
-      default_day = ['AllDays'] + [[24, 0]]
-      rules = []
-      rules << ['Weekend', ctes_season, 'Sat/Sun'] + wknd_av
-      rules << ['Summer Weekday', ctes_season, 'Mon/Tue/Wed/Thu/Fri'] + wk_av
-      options_ctes = { 'name' => ruleset_name,
-                       'winter_design_day' => winter_design_day,
-                       'summer_design_day' => summer_design_day,
-                       'default_day' => default_day,
-                       'rules' => rules }
-      ctes_av_new = OsLib_Schedules.createComplexSchedule(model, options_ctes)
-      ctes_av_new.setScheduleTypeLimits(sched_limits_onoff)
-
-      # Create ctes setpoint temperature schedule
-      ruleset_name = "#{ctes.name} Setpoint Schedule (New)"
-      winter_design_day = [[24, 99]]
-      summer_design_day = wk_ctes
-      default_day = ['AllDays'] + [[24, 99]]
-      rules = []
-      rules << ['Weekend', ctes_season, 'Sat/Sun'] + wknd_ctes
-      rules << ['Summer Weekday', ctes_season, 'Mon/Tue/Wed/Thu/Fri'] + wk_ctes
-      options_ctes_ctes = { 'name' => ruleset_name,
-                            'winter_design_day' => winter_design_day,
-                            'summer_design_day' => summer_design_day,
-                            'default_day' => default_day,
-                            'rules' => rules }
-      ctes_sch_new = OsLib_Schedules.createComplexSchedule(model, options_ctes_ctes)
-      ctes_sch_new.setScheduleTypeLimits(sched_limits_temp)
-
-      # Create chiller setpoint temperature schedule
-      ruleset_name = "#{ctes_chiller.name} Setpoint Schedule (New)"
-      winter_design_day = [[24, loop_sp]]
-      summer_design_day = wk_chiller
-      default_day = ['AllDays'] + [[24, loop_sp]]
-      rules = []
-      rules << ['Weekend', ctes_season, 'Sat/Sun'] + wknd_chiller
-      rules << ['Summer Weekday', ctes_season, 'Mon/Tue/Wed/Thu/Fri'] + wk_chiller
-      options_ctes_chiller = { 'name' => ruleset_name,
-                               'winter_design_day' => winter_design_day,
-                               'summer_design_day' => summer_design_day,
-                               'default_day' => default_day,
-                               'rules' => rules }
-      chill_sch_new = OsLib_Schedules.createComplexSchedule(model, options_ctes_chiller)
-      chill_sch_new.setScheduleTypeLimits(sched_limits_temp)
-
-      # Create loop setpoint temperature schedule - if new = true
-      if new
-        ruleset_name = "#{ctes_loop.name} Setpoint Schedule (New)"
-        options_ctes_loop = { 'name' => ruleset_name,
-                              'winterTimeValuePairs' => [[24, loop_sp]],
-                              'summerTimeValuePairs' => [[24, loop_sp]],
-                              'defaultTimeValuePairs' => [[24, loop_sp]] }
-        loop_sch_new = OsLib_Schedules.createSimpleSchedule(model, options_ctes_loop)
-        loop_sch_new.setScheduleTypeLimits(sched_limits_temp)
-      end
-
-      # Register info about new schedule objects
-      runner.registerInfo("The following schedules were added to the model:\n" \
-                          "   * #{ctes_av_new.name}\n" \
-                          "   * #{ctes_sch_new.name}\n" \
-                          "   * #{chill_sch_new.name}\n" \
-                          "   * #{loop_sch_new.name}")
-
-      if old
-        runner.registerInfo('However, these schedules are not used in favor of those pre-defined by the user.')
-      end
-
-    end
-    # end of new schedule build-----------------------------------------------------------------------------------------
-    #-------------------------------------------------------------------------------------------------------------------
-
-    ## Create Component Setpoint Objects--------------------------------------------------------------------------------
-
-    if old
-      ctes_avail_sched = model.getScheduleRulesetByName(ctes_av).get
-      ctes_temp_sched = model.getScheduleRulesetByName(ctes_sch).get
-      chill_temp_sched = model.getScheduleRulesetByName(chill_sch).get
-    elsif new
-      ctes_avail_sched = ctes_av_new
-      ctes_temp_sched = ctes_sch_new
-      chill_temp_sched = chill_sch_new
-    end
-
-    # Apply ice availability schedule
-    ctes.setAvailabilitySchedule(ctes_avail_sched)
-
-    # Add component setpoint manager for ice tank
-    ctes_sp_mgr = OpenStudio::Model::SetpointManagerScheduled.new(model, ctes_temp_sched)
-    ctes_sp_mgr.addToNode(ctes.outletModelObject.get.to_Node.get)
-    ctes_sp_mgr.setName("#{ctes.name} Setpoint Manager")
-
-    # Add component setpoint manager for ctes chiller
-    chill_sp_mgr = OpenStudio::Model::SetpointManagerScheduled.new(model, chill_temp_sched)
-    chill_sp_mgr.addToNode(ctes_chiller.supplyOutletModelObject.get.to_Node.get)
-    chill_sp_mgr.setName("#{ctes_chiller.name} Setpoint Manager")
-
-    # Replace existing loop setpoint manager - if new = true and old = false
-    if new && !old
-      loop_sp_node = ctes_loop.loopTemperatureSetpointNode
-      loop_sp_mgrs = loop_sp_node.setpointManagers
-      loop_sp_mgrs.each do |spm|
-        next unless ['Temperature', 'MinimumTemperature', 'MaximumTemperature'].include?(spm.controlVariable)
-        spm.disconnect
-        runner.registerInfo("Selected loop temperature setpoint manager '#{spm.name}' " \
-									"with control variable '#{spm.controlVariable}' was disconnected.")
-      end
-
-      loop_sp_mgr = OpenStudio::Model::SetpointManagerScheduled.new(model, loop_sch_new)
-      loop_sp_mgr.addToNode(loop_sp_node)
-      loop_sp_mgr.setName("#{ctes_loop.name} Setpoint Manager (New)")
-
-      demand_sp_mgr = loop_sp_mgr.clone.to_SetpointManagerScheduled.get
-      demand_sp_mgr.addToNode(ctes_loop.demandInletNode)
-      demand_sp_mgr.setName("#{ctes_loop.name} Demand Side Setpoint Manager (New)")
-    end
-
-    # Register info about new schedule objects
-    runner.registerInfo('The following component temperature setpoint managers were added to the ' \
-                        "model:\n" \
-                        "   * #{ctes_sp_mgr.name}\n" \
-                        "   * #{chill_sp_mgr.name}")
-
-    if old # Old Schedules always take precedence, even if new ones are also created
-      runner.registerInfo("The following schedules ared used in the model:\n" \
-   		                  "   * #{ctes_avail_sched.name}\n" \
-   		                  "   * #{ctes_temp_sched.name}\n" \
-   		                  "   * #{chill_temp_sched.name}")
-      runner.registerInfo('The following loop temperature setpoint manager was added to the ' \
-  		                  "model:\n" \
-  		                  "   * #{demand_sp_mgr.name}")
-    elsif new && !old
-      runner.registerInfo('The following loop temperature setpoint managers were added to the ' \
-   		                  "model:\n" \
-   		                  "   * #{loop_sp_mgr.name}\n" \
-   		                  "   * #{demand_sp_mgr.name}")
-    end
-
-    ## Create General EMS Variables for Chiller and TES Capacities------------------------------------------------------
-
-    # Chiller Nominal Capacity Internal Variable
-    evar_chiller_cap = OpenStudio::Model::EnergyManagementSystemInternalVariable.new(model, 'Chiller Nominal Capacity')
-    evar_chiller_cap.setInternalDataIndexKeyName(ctes_chiller.name.to_s)
-    evar_chiller_cap.setName('CTES_Chiller_Capacity')
-
-    # Ice Tank thermal storage capacity - Empty Global Variable
-    evar_tes_cap = OpenStudio::Model::EnergyManagementSystemGlobalVariable.new(model, 'TES_Cap')
-
-    # Set TES Capacity from User Inputs
-    set_tes_cap = OpenStudio::Model::EnergyManagementSystemProgram.new(model)
-    set_tes_cap.setName('Set_TES_Cap')
-    body = <<-EMS
-      SET TES_Cap = #{storage_capacity}
-    EMS
-    set_tes_cap.setBody(body)
-
-    set_tes_cap_pcm = OpenStudio::Model::EnergyManagementSystemProgramCallingManager.new(model)
-    set_tes_cap_pcm.setName('Set_TES_Cap_CallMgr')
-    set_tes_cap_pcm.setCallingPoint('BeginNewEnvironment')
-    set_tes_cap_pcm.addProgram(set_tes_cap)
-
-    ## Create EMS Components to Control Load on Upstream (Priority) Device----------------------------------------------
-
-    # Flag value indicating that a chiller limiter is required or DR Test is Activated
-    if chiller_limit != 1.0 || dr == true
-
-      # Set up EMS output
-      output_ems = model.getOutputEnergyManagementSystem
-      output_ems.setActuatorAvailabilityDictionaryReporting('Verbose')
-      output_ems.setInternalVariableAvailabilityDictionaryReporting('Verbose')
-      output_ems.setEMSRuntimeLanguageDebugOutputLevel('None')
-
-      runner.registerInfo("A #{(chiller_limit * 100).round(2)}% capacity limit has been placed on the chiller " \
-  		                  'during ice discharge. EMS scripting is employed to actuate this control via chiller ' \
-  		                  'outlet setpoint. ')
-
-      # Internal and Global Variable(s)
-
-      # Chiller Limited Capacity for Ice Discharge Period - Empty Global Variable
-      evar_chiller_limit = OpenStudio::Model::EnergyManagementSystemGlobalVariable.new(model, 'Chiller_Limited_Capacity')
-
-      # Instances of Chiller Limit Application - Empty Global Variable
-      evar_limit_counter = OpenStudio::Model::EnergyManagementSystemGlobalVariable.new(model, 'Limit_Counter')
-
-      # Max Delta-T for Chiller De-Rate - Empty Global Variable
-      dt_ems = OpenStudio::Model::EnergyManagementSystemGlobalVariable.new(model, 'DT_Max')
-
-      # DR In-Progress Flag - Empty Global Variable
-      dr_flag = OpenStudio::Model::EnergyManagementSystemGlobalVariable.new(model, 'DR_Flag')
-
-      # Sensor(s)
-      # Evaporator Entering Water Temperature
-      eewt = OpenStudio::Model::EnergyManagementSystemSensor.new(model, 'Chiller Evaporator Inlet Temperature')
-      eewt.setName('EEWT')
-      eewt.setKeyName(ctes_chiller.name.to_s)
-
-      # Evaporator Leaving Water Temperature
-      elwt = OpenStudio::Model::EnergyManagementSystemSensor.new(model, 'Chiller Evaporator Outlet Temperature')
-      elwt.setName('ELWT')
-      elwt.setKeyName(ctes_chiller.name.to_s)
-
-      # Evaporator Leave Water Temperature Setpoint
-      elwt_sp = OpenStudio::Model::EnergyManagementSystemSensor.new(model, 'Schedule Value')
-      elwt_sp.setName('SP')
-      elwt_sp.setKeyName(chill_temp_sched.name.to_s)
-
-      # Supply Water Temperature Setpoint
-      swt_sp = OpenStudio::Model::EnergyManagementSystemSensor.new(model, 'System Node Setpoint Temperature')
-      swt_sp.setName('SWT_SP')
-      swt_sp.setKeyName(ctes_loop.supplyOutletNode.name.to_s)
-
-      # Ice Tank Availability Schedule
-      av_sp = OpenStudio::Model::EnergyManagementSystemSensor.new(model, 'Schedule Value')
-      av_sp.setName('ICE_AV')
-      av_sp.setKeyName(ctes.availabilitySchedule.get.name.to_s)
-
-      # Ice Tank Leaving Water Temperature
-      ilwt = OpenStudio::Model::EnergyManagementSystemSensor.new(model, 'System Node Temperature')
-      ilwt.setName('ILWT')
-      ilwt.setKeyName(ctes.outletModelObject.get.name.to_s)
-
-      # Ice Tank State of Charge
-      soc = OpenStudio::Model::EnergyManagementSystemSensor.new(model, 'Ice Thermal Storage End Fraction')
-      soc.setName('SOC')
-      soc.setKeyName(ctes.name.to_s)
-
-      # Actuator(s)
-      # Evaporator Leaving Water Temperature Septoint Node Actuator
-      elwt = OpenStudio::Model::EnergyManagementSystemActuator.new(ctes_chiller.supplyOutletModelObject.get,
-                                                                   'System Node Setpoint', 'Temperature Setpoint')
-      elwt.setName('ELWT_SP')
-    end
-
-    if chiller_limit != 1
-      # Program(s)
-      # Apply Chiller Capacity Limit During Ice Discharge
-      chiller_limit_program = OpenStudio::Model::EnergyManagementSystemProgram.new(model)
-      chiller_limit_program.setName('Chiller_Limiter')
-      body = <<-EMS
-  		IF ( ICE_AV == 1 ) && ( SP >= SWT_SP ) && ( DR_Flag <> 1 )
-  		 	IF ( EEWT - SP ) > DT_Max
-  		    	SET ELWT_SP = ( EEWT - DT_Max )
-  		    	SET Limit_Counter = ( Limit_Counter + ( SystemTimeStep / ZoneTimeStep ) )
-  		  	ELSE
-  		    	SET ELWT_SP = SP
-  		  	ENDIF
-  		ELSE
-  		  	SET ELWT_SP = SP
-  		ENDIF
-      EMS
-      chiller_limit_program.setBody(body)
-
-      # Determine Capacity Limit of the Chiller in Watts (Also initializes limit counter)
-      chiller_limit_calculation = OpenStudio::Model::EnergyManagementSystemProgram.new(model)
-      chiller_limit_calculation.setName('Chiller_Limit_Calc')
-      body = <<-EMS
-  			SET Chiller_Limited_Capacity = ( #{chiller_limit} * CTES_Chiller_Capacity )
-  			SET Limit_Counter = 0
-  			SET DR_Flag = 0
-        SET DT_Max = #{dt_max}
-      EMS
-      chiller_limit_calculation.setBody(body)
-
-      # Program Calling Manager(s)
-      chiller_limit_pcm = OpenStudio::Model::EnergyManagementSystemProgramCallingManager.new(model)
-      chiller_limit_pcm.setName('Chiller_Limiter_CallMgr')
-      chiller_limit_pcm.setCallingPoint('InsideHVACSystemIterationLoop')
-      chiller_limit_pcm.addProgram(chiller_limit_program)
-
-      chiller_limit_calc_pcm = OpenStudio::Model::EnergyManagementSystemProgramCallingManager.new(model)
-      chiller_limit_calc_pcm.setName('Chiller_Limit_Calc_CallMgr')
-      chiller_limit_calc_pcm.setCallingPoint('BeginNewEnvironment')
-      chiller_limit_calc_pcm.addProgram(chiller_limit_calculation)
-
-      # EMS Output Variable(s) - Chiller Limiter Dependent
-      eout_chiller_limit = OpenStudio::Model::EnergyManagementSystemOutputVariable.new(model, evar_chiller_limit)
-      eout_chiller_limit.setName('Chiller Limited Capacity')
-
-      eout_limit_counter = OpenStudio::Model::EnergyManagementSystemOutputVariable.new(model, evar_limit_counter)
-      eout_limit_counter.setName('Chiller Limit Counter')
-
-    end
-
-    ## DR EVENT TESTER EMS --------------------------
-    ## Add Demand Response Event Tester if Applicable (EMS Controller Override)-----------------------------------------
-
-    if dr
-
-      # Create EMS Script that:
-      # => 1. Determines if DR Event has been triggered (inspects date/time)
-      # => 2. Actuates full storage if in a Load Shed DR event
-      # => 3. Actuates ice charging/chiller @ max if in a Load Add DR event
-      # => 4. Allows staged chiller ramp if ice runs out (if selected by user)
-
-      # Create DR EMS Program
-      dr_program = OpenStudio::Model::EnergyManagementSystemProgram.new(model)
-      dr_program.setName('Demand_Response_Pgm')
-
-      # Define Program Script Based on Permission of Chiller to Operate to Meet Load
-      if dr_chill && dr_add_shed == 'Shed'	# Chiller is permitted to pick up unmet load
-        body = <<-EMS
-			IF ( Month == #{dr_mon} ) && ( DayOfMonth == #{dr_day} )
-				IF ( CurrentTime > #{dr_time} ) && ( CurrentTime <= #{dr_time + dr_dur} )
-					SET DR_Flag = 1
-          IF ( ILWT - SWT_SP < 0.05 )
-					  SET ELWT_SP = EEWT
-          ELSEIF ( ILWT - SWT_SP <= 0.33 * DT_Max )
-            SET ELWT_SP = EEWT - ( 0.33 * DT_Max )
-          ELSEIF ( ILWT - SWT_SP <= 0.67 * DT_Max )
-            SET ELWT_SP = EEWT - ( 0.67 * DT_Max )
-          ELSE
-            SET ELWT_SP = ( EEWT - DT_Max )
-            SET Limit_Counter = ( Limit_Counter + ( SystemTimeStep / ZoneTimeStep ) )
-					ENDIF
-				ELSEIF ( DR_Flag == 1 )
-					SET DR_Flag = 0
-          SET ELWT_SP = SP
-				ENDIF
-			ENDIF
-			EMS
-        dr_program.setBody(body)
-      elsif !dr_chill && dr_add_shed == 'Shed'	# Chiller is not permitted to pick up unmet load when ice is deficient
-        body = <<-EMS
-			IF ( Month == #{dr_mon} ) && ( DayOfMonth == #{dr_day} )
-				IF ( CurrentTime > #{dr_time} ) && ( CurrentTime <= #{dr_time + dr_dur} )
-					SET DR_Flag = 1
-					SET ELWT_SP = EEWT + 10.0
-				ELSEIF ( DR_Flag == 1 )
-					SET DR_Flag = 0
-				ENDIF
-			ENDIF
-			EMS
-        dr_program.setBody(body)
-      elsif dr_add_shed == 'Add'
-        body = <<-EMS
-      IF ( Month == #{dr_mon} ) && ( DayOfMonth == #{dr_day} )
-				IF ( CurrentTime > #{dr_time} ) && ( CurrentTime <= #{dr_time + dr_dur} )
-          SET DR_Flag = 1
-          IF ( SOC < 0.99 ) && ( ICE_AV == 1 )
-            SET ELWT_SP = #{chg_sp}
-          ELSEIF SOC > 0.95
-            SET ELWT_SP = SWT_SP
-          ENDIF
-        ELSEIF ( DR_Flag == 1 )
-          SET DR_Flag = 0
-        ENDIF
-      ENDIF
-      EMS
-        dr_program.setBody(body)
-      end
-
-      # Create DR EMS Program Calling Manager
-      dr_pcm = OpenStudio::Model::EnergyManagementSystemProgramCallingManager.new(model)
-      dr_pcm.setName('Demand_Response_PCM')
-      dr_pcm.setCallingPoint('InsideHVACSystemIterationLoop')
-      dr_pcm.addProgram(dr_program)
-
-      # EMS Output Variable(s)
-      eout_drflag = OpenStudio::Model::EnergyManagementSystemOutputVariable.new(model, dr_flag)
-      eout_drflag.setName('Demand Response Flag')
-    end
-    ## END DR EVENT TESTER EMS ---------------------
-
-    ## Add Output Variables and Meters----------------------------------------------------------------------------------
-
-    # EMS Output Variable(s) - Chiller Limit Independent
-    eout_chiller_cap = OpenStudio::Model::EnergyManagementSystemOutputVariable.new(model, evar_chiller_cap)
-    eout_chiller_cap.setName('Chiller Nominal Capacity')
-
-    eout_tes_cap = OpenStudio::Model::EnergyManagementSystemOutputVariable.new(model, evar_tes_cap)
-    eout_tes_cap.setName('Ice Thermal Storage Capacity')
-
-    # Identify existing output variables
-    vars = model.getOutputVariables
-    var_names = []
-    vars.each do |v|
-      var_names << v.variableName
-    end
-
-    # List names of desired output variables
-    ovar_names = ['Ice Thermal Storage Cooling Rate',
-                  'Ice Thermal Storage Cooling Charge Rate',
-                  'Ice Thermal Storage Cooling Discharge Rate',
-                  'Ice Thermal Storage Cooling Charge Energy',
-                  'Ice Thermal Storage Cooling Discharge Energy',
-                  'Ice Thermal Storage Cooling Discharge Energy',
-                  'Ice Thermal Storage End Fraction',
-                  'Ice Thermal Storage On Coil Fraction',
-                  'Ice Thermal Storage Mass Flow Rate',
-                  'Ice Thermal Storage Tank Mass Flow Rate',
-                  'Ice Thermal Storage Bypass Mass Flow Rate',
-                  'Ice Thermal Storage Fluid Inlet Temperature',
-                  'Ice Thermal Storage Tank Outlet Temperature',
-                  'Ice Thermal Storage Blended Outlet Temperature',
-                  'Ice Thermal Storage Ancillary Electric Power',
-                  'Ice Thermal Storage Ancillary Electric Energy',
-                  'Chiller COP',
-                  'Chiller Cycling Ratio',
-                  'Chiller Part Load Ratio',
-                  'Chiller Electric Power',
-                  'Chiller Electric Energy',
-                  'Chiller Evaporator Cooling Rate',
-                  'Chiller Evaporator Cooling Energy',
-                  'Chiller Condenser Heat Transfer Rate',
-                  'Chiller Condenser Heat Transfer Energy',
-                  'Chiller False Load Heat Transfer Rate',
-                  'Chiller False Load Heat Transfer Energy',
-                  'Chiller Evaporator Inlet Temperature',
-                  'Chiller Evaporator Outlet Temperature',
-                  'Chiller Evaporator Mass Flow Rate',
-                  'Site Outdoor Air Drybulb Temperature',
-                  'Site Outdoor Air Wetbulb Temperature']
-
-    # Create new output variables if they do not already exist
-    ovars = []
-    ovar_names.each do |nm|
-      # if !var_names.include?(nm)
-      ovars << OpenStudio::Model::OutputVariable.new(nm, model)
-      # end
-    end
-
-    # Create output variable for loop demand inlet temperature
-    v = OpenStudio::Model::OutputVariable.new('System Node Temperature', model)
-    v.setKeyValue(ctes_loop.demandInletNode.name.to_s)
-    ovars << v
-
-    # Create output variable for loop demand outlet temperature
-    v = OpenStudio::Model::OutputVariable.new('System Node Temperature', model)
-    v.setKeyValue(ctes_loop.demandOutletNode.name.to_s)
-    ovars << v
-
-    # Create output variable for loop supply inlet temperature
-    v = OpenStudio::Model::OutputVariable.new('System Node Temperature', model)
-    v.setKeyValue(ctes_loop.supplyInletNode.name.to_s)
-    ovars << v
-
-    # Create output variable for loop supply outlet temperature
-    v = OpenStudio::Model::OutputVariable.new('System Node Temperature', model)
-    v.setKeyValue(ctes_loop.supplyOutletNode.name.to_s)
-    ovars << v
-
-    # Create output variable for chiller inlet temperature
-    v = OpenStudio::Model::OutputVariable.new('System Node Temperature', model)
-    v.setKeyValue(ctes_chiller.supplyInletModelObject.get.name.to_s)
-    ovars << v
-
-    # Create output variable for chiller outlet temperature
-    v = OpenStudio::Model::OutputVariable.new('System Node Temperature', model)
-    v.setKeyValue(ctes_chiller.supplyOutletModelObject.get.name.to_s)
-    ovars << v
-
-    # Create output variable for ice tank inlet temperature
-    v = OpenStudio::Model::OutputVariable.new('System Node Temperature', model)
-    v.setKeyValue(ctes.inletModelObject.get.name.to_s)
-    ovars << v
-
-    # Create output variable for ice tank outlet temperature
-    v = OpenStudio::Model::OutputVariable.new('System Node Temperature', model)
-    v.setKeyValue(ctes.outletModelObject.get.name.to_s)
-    ovars << v
-
-    # Create output variables for the new operating schedules
-    v = OpenStudio::Model::OutputVariable.new('Schedule Value', model)
-    v.setKeyValue(ctes_avail_sched.name.to_s)
-    ovars << v
-
-    v = OpenStudio::Model::OutputVariable.new('Schedule Value', model)
-    v.setKeyValue(ctes_temp_sched.name.to_s)
-    ovars << v
-
-    v = OpenStudio::Model::OutputVariable.new('Schedule Value', model)
-    v.setKeyValue(chill_temp_sched.name.to_s)
-    ovars << v
-
-    # Create output variable for plant loop setpoint temperature - if new = true
-    if new
-      v = OpenStudio::Model::OutputVariable.new('Schedule Value', model)
-      v.setKeyValue(loop_sch_new.name.to_s)
-      ovars << v
-    end
-
-    # Create output variables for ice discharge performance curve
-    v = OpenStudio::Model::OutputVariable.new('Performance Curve Input Variable 1 Value', model)
-    v.setKeyValue(ctes.dischargingCurve.name.to_s)
-    v.setName('Discharge Curve Input Value 1')
-    ovars << v
-
-    v = OpenStudio::Model::OutputVariable.new('Performance Curve Input Variable 2 Value', model)
-    v.setKeyValue(ctes.dischargingCurve.name.to_s)
-    v.setName('Discharge Curve Input Value 2')
-    ovars << v
-
-    v = OpenStudio::Model::OutputVariable.new('Performance Curve Output Value', model)
-    v.setKeyValue(ctes.dischargingCurve.name.to_s)
-    v.setName('Discharge Curve Output Value')
-    ovars << v
-
-    # Create output variables for ice charge performance curve
-    v = OpenStudio::Model::OutputVariable.new('Performance Curve Input Variable 1 Value', model)
-    v.setKeyValue(ctes.chargingCurve.name.to_s)
-    v.setName('Charge Curve Input Value 1')
-    ovars << v
-
-    v = OpenStudio::Model::OutputVariable.new('Performance Curve Input Variable 2 Value', model)
-    v.setKeyValue(ctes.chargingCurve.name.to_s)
-    v.setName('Charge Curve Input Value 2')
-    ovars << v
-
-    v = OpenStudio::Model::OutputVariable.new('Performance Curve Output Value', model)
-    v.setKeyValue(ctes.chargingCurve.name.to_s)
-    v.setName('Charge Curve Output Value')
-    ovars << v
-
-    # Create output variables for chiller performance
-    v = OpenStudio::Model::OutputVariable.new('Performance Curve Output Value', model)
-    v.setKeyValue(ctes_chiller.coolingCapacityFunctionOfTemperature.name.to_s)
-    v.setName('Charge Curve Output Value')
-    ovars << v
-
-    v = OpenStudio::Model::OutputVariable.new('Performance Curve Output Value', model)
-    v.setKeyValue(ctes_chiller.electricInputToCoolingOutputRatioFunctionOfTemperature.name.to_s)
-    v.setName('Charge Curve Output Value')
-    ovars << v
-
-    v = OpenStudio::Model::OutputVariable.new('Performance Curve Output Value', model)
-    v.setKeyValue(ctes_chiller.electricInputToCoolingOutputRatioFunctionOfPLR.name.to_s)
-    v.setName('Charge Curve Output Value')
-    ovars << v
-
-    if chiller_limit != 1.0 # flag for EMS use, following EMS vars only exist if previous script ran
-
-      # Create output variable for chiller limited capacity (from EMS Output Variable)
-      v = OpenStudio::Model::OutputVariable.new(eout_chiller_limit.name.to_s, model)
-      v.setName("#{ctes_chiller.name} Limited Capacity")
-      v.setVariableName('Chiller Limited Capacity')
-      ovars << v
-
-      # Create output variable for chiller limit counter (from EMS Output Variable)
-      v = OpenStudio::Model::OutputVariable.new(eout_limit_counter.name.to_s, model)
-      v.setName("#{ctes_chiller.name} Limit Counter [Zone Timesteps]")
-      v.setVariableName('Chiller Limit Counter')
-      ovars << v
-
-    end
-
-    # Create output variable for Demand Response Flag (from EMS Output Variable)
-    if dr
-
-      v = OpenStudio::Model::OutputVariable.new(eout_drflag.name.to_s, model)
-      v.setName('Demand Response Event Flag')
-      v.setVariableName('Demand Response Flag')
-      ovars << v
-
-    end
-
-    # Create output variable for TES Capacity (from EMS Global Variable)
-    v = OpenStudio::Model::OutputVariable.new(eout_tes_cap.name.to_s, model)
-    v.setName("#{ctes.name} Ice Thermal Storage Capacity [GJ]")
-    v.setVariableName('Ice Thermal Storage Capacity')
-    ovars << v
-
-    # Create output variable for chiller nominal capacity (from EMS Output Variable)
-    v = OpenStudio::Model::OutputVariable.new(eout_chiller_cap.name.to_s, model)
-    v.setName("#{ctes_chiller.name} Nominal Capacity [W]")
-    v.setVariableName('Chiller Nominal Capacity')
-    ovars << v
-
-    # Set variable reporting frequency for newly created output variables
-    ovars.each do |var|
-      var.setReportingFrequency(report_freq)
-    end
-
-    # Register info about new output variables
-    runner.registerInfo("#{ovars.size} chiller and ice storage output variables were added to the model.")
-
-    # Create new energy/specific end use meters
-    omet_names = ['Pumps:Electricity',
-                  'Fans:Electricity',
-                  'Cooling:Electricity',
-                  'Electricity:HVAC',
-                  'Electricity:Plant',
-                  'Electricity:Building',
-                  'Electricity:Facility']
-
-    omet_names.each do |nm|
-      omet = OpenStudio::Model::OutputMeter.new(model)
-      omet.setName(nm)
-      omet.setReportingFrequency(report_freq)
-      omet.setMeterFileOnly(false)
-      omet.setCumulative(false)
-    end
-
-    # Register info about new output meters
-    runner.registerInfo("#{omet_names.size} output meters were added to the model.")
-
-    ## Report Final Condition of Model----------------------------------------------------------------------------------
-    total_storage = model.getThermalStorageIceDetaileds.size
-    runner.registerFinalCondition("The model finished with #{total_storage} ice energy storage device(s).")
-
-    true
-  end
-end
-
-# register the measure to be used by the application
-AddCentralIceStorage.new.registerWithApplication
+# *******************************************************************************
+# OpenStudio(R), Copyright (c) 2008-2021, Alliance for Sustainable Energy, LLC.
+# All rights reserved.
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# (1) Redistributions of source code must retain the above copyright notice,
+# this list of conditions and the following disclaimer.
+#
+# (2) Redistributions in binary form must reproduce the above copyright notice,
+# this list of conditions and the following disclaimer in the documentation
+# and/or other materials provided with the distribution.
+#
+# (3) Neither the name of the copyright holder nor the names of any contributors
+# may be used to endorse or promote products derived from this software without
+# specific prior written permission from the respective party.
+#
+# (4) Other than as required in clauses (1) and (2), distributions in any form
+# of modifications or other derivative works may not use the "OpenStudio"
+# trademark, "OS", "os", or any other confusingly similar designation without
+# specific prior written permission from Alliance for Sustainable Energy, LLC.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND ANY CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER(S), ANY CONTRIBUTORS, THE
+# UNITED STATES GOVERNMENT, OR THE UNITED STATES DEPARTMENT OF ENERGY, NOR ANY OF
+# THEIR EMPLOYEES, BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
+# OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# *******************************************************************************
+
+# Measure distributed under NREL Copyright terms, see LICENSE.md file.
+
+# Author: Karl Heine
+# Date: June 2019 - July 2020
+# Additional Code Added to Test Ice Performance for Demand Response Events: September 2019
+# Revised February 2020
+
+# References:
+# => ASHRAE Handbook, HVAC Systems and Equipment, Chapter 51: Thermal storage, 2016
+# => ASHRAE Design Guide for Cool Thermal Storage, 2nd Edition, January 2019
+# => Manufacturer marketing materials, available online
+
+# load OpenStudio measure libraries
+require "#{File.dirname(__FILE__)}/resources/OsLib_Schedules"
+
+# start the measure
+class AddCentralIceStorage < OpenStudio::Measure::ModelMeasure
+  # human readable name
+  def name
+    # Measure name should be the title case of the class name.
+    'Add Central Ice Storage'
+  end
+
+  # human readable description
+  def description
+    'This measure adds an ice storage tank to a chilled water loop for the purpose of thermal energy storage.'
+  end
+
+  # human readable description of modeling approach
+  def modeler_description
+    'This measure adds the necessary components and performs required model articulations to add an ice ' \
+            'thermal storage tank (ITS) to an existing chilled water loop. Special consideration is given to ' \
+            'implementing configuration and control options. Refer to the ASHRAE CTES Design Guide or manufacturer ' \
+            'applications guides for detailed implementation info. A user guide document is included in the docs ' \
+            'folder of this measure to help translate design objectives into measure argument input values.'
+  end
+
+  # define the arguments that the user will input
+  def arguments(model)
+    args = OpenStudio::Measure::OSArgumentVector.new
+
+    # Make choice argument for energy storage objective
+    objective = OpenStudio::Measure::OSArgument.makeChoiceArgument('objective', ['Full Storage', 'Partial Storage'], true)
+    objective.setDisplayName('Select Energy Storage Objective:')
+    objective.setDefaultValue('Partial Storage')
+    args << objective
+
+    # Make choice argument for component layout
+    upstream = OpenStudio::Measure::OSArgument.makeChoiceArgument('upstream', ['Chiller', 'Storage'])
+    upstream.setDisplayName('Select Upstream Device:')
+    upstream.setDescription('Partial Storage Only. See documentation for control implementation.')
+    upstream.setDefaultValue('Chiller')
+    args << upstream
+
+    # Make double argument for thermal energy storage capacity
+    storage_capacity = OpenStudio::Measure::OSArgument.makeDoubleArgument('storage_capacity', true)
+    storage_capacity.setDisplayName('Enter Thermal Energy Storage Capacity for Ice Tank [ton-hours]:')
+    storage_capacity.setDefaultValue(2000)
+    args << storage_capacity
+
+    # Make choice argument for ice melt process indicator
+    melt_indicator = OpenStudio::Measure::OSArgument.makeChoiceArgument('melt_indicator', ['InsideMelt', 'OutsideMelt'], true)
+    melt_indicator.setDisplayName('Select Thaw Process Indicator for Ice Storage:')
+    melt_indicator.setDescription('')
+    melt_indicator.setDefaultValue('InsideMelt')
+    args << melt_indicator
+
+    # Make list of chilled water loop(s) from which user can select
+    plant_loops = model.getPlantLoops
+    loop_choices = OpenStudio::StringVector.new
+    plant_loops.each do |loop|
+      if loop.sizingPlant.loopType.to_s == 'Cooling'
+        loop_choices << loop.name.to_s
+      end
+    end
+
+    # Make choice argument for loop selection
+    selected_loop = OpenStudio::Measure::OSArgument.makeChoiceArgument('selected_loop', loop_choices, true)
+    selected_loop.setDisplayName('Select Loop:')
+    selected_loop.setDescription('This is the cooling loop on which the ice tank will be added.')
+    if loop_choices.include?('Chilled Water Loop')
+      selected_loop.setDefaultValue('Chilled Water Loop')
+    else
+      selected_loop.setDescription('Error: No Cooling Loop Found')
+    end
+    args << selected_loop
+
+    # Make list of available chillers from which the user can select
+    chillers = model.getChillerElectricEIRs
+    chillers += model.getChillerAbsorptions
+    chillers += model.getChillerAbsorptionIndirects
+    chiller_choices = OpenStudio::StringVector.new
+    chillers.each do |chill|
+      chiller_choices << chill.name.to_s
+    end
+
+    # Make choice argument for chiller selection
+    selected_chiller = OpenStudio::Measure::OSArgument.makeChoiceArgument('selected_chiller', chiller_choices, true)
+    selected_chiller.setDisplayName('Select Chiller:')
+    selected_chiller.setDescription('The ice tank will be placed in series with this chiller.')
+    if !chillers.empty?
+      selected_chiller.setDefaultValue(chiller_choices[0])
+    else
+      selected_chiller.setDescription('Error: No Chiller Found')
+    end
+    args << selected_chiller
+
+    # Make double argument for ice chiller resizing factor - relative to selected chiller capacity
+    chiller_resize_factor = OpenStudio::Measure::OSArgument.makeDoubleArgument('chiller_resize_factor', false)
+    chiller_resize_factor.setDisplayName('Enter Chiller Sizing Factor:')
+    chiller_resize_factor.setDefaultValue(0.75)
+    args << chiller_resize_factor
+
+    # Make double argument for chiller max capacity limit during ice discharge
+    chiller_limit = OpenStudio::Measure::OSArgument.makeDoubleArgument('chiller_limit', false)
+    chiller_limit.setDisplayName('Enter Chiller Max Capacity Limit During Ice Discharge:')
+    chiller_limit.setDescription('Enter as a fraction of chiller capacity (0.0 - 1.0).')
+    chiller_limit.setDefaultValue(1.0)
+    args << chiller_limit
+
+    # Make choice argument for schedule options
+    old = OpenStudio::Measure::OSArgument.makeBoolArgument('old', false)
+    old.setDisplayName('Use Existing (Pre-Defined) Temperature Control Schedules')
+    old.setDescription('Use drop-down selections below.')
+    old.setDefaultValue(false)
+    args << old
+
+    # Find All Existing Schedules with Type Limits of "Temperature"
+    sched_options = []
+    sched_options2 = []
+    all_scheds = model.getSchedules
+    all_scheds.each do |sched|
+      sched.to_ScheduleBase.get
+      unless sched.scheduleTypeLimits.empty?
+        case sched.scheduleTypeLimits.get.unitType.to_s
+        when 'Temperature'
+          sched_options << sched.name.to_s
+        when 'Availability', 'OnOff'
+          sched_options2 << sched.name.to_s
+        end
+      end
+    end
+    sched_options = ['N/A'] + sched_options.sort
+    sched_options2 = ['N/A'] + sched_options2.sort
+
+    # Create choice argument for ice availability schedule (old = true)
+    ctes_av = OpenStudio::Measure::OSArgument.makeChoiceArgument('ctes_av', sched_options2, false)
+    ctes_av.setDisplayName('Select Pre-Defined Ice Availability Schedule')
+    if sched_options2.empty?
+      ctes_av.setDescription('Warning: No availability schedules found')
+    end
+    ctes_av.setDefaultValue('N/A')
+    args << ctes_av
+
+    # Create choice argument for ice tank component setpoint sched (old = true)
+    ctes_sch = OpenStudio::Measure::OSArgument.makeChoiceArgument('ctes_sch', sched_options, false)
+    ctes_sch.setDisplayName('Select Pre-Defined Ice Tank Component Setpoint Schedule')
+    if sched_options.empty?
+      ctes_sch.setDescription('Warning: No temperature setpoint schedules found')
+    end
+    ctes_sch.setDefaultValue('N/A')
+    args << ctes_sch
+
+    # Create choice argument for chiller component setpoint sched (old = true)
+    chill_sch = OpenStudio::Measure::OSArgument.makeChoiceArgument('chill_sch', sched_options, false)
+    chill_sch.setDisplayName('Select Pre-Defined Chiller Component Setpoint Schedule')
+    if sched_options.empty?
+      chill_sch.setDescription('Warning: No temperature setpoint schedules found')
+    end
+    chill_sch.setDefaultValue('N/A')
+    args << chill_sch
+
+    # Make bool argument for creating new schedules
+    new = OpenStudio::Measure::OSArgument.makeBoolArgument('new', false)
+    new.setDisplayName('Create New (Simple) Temperature Control Schedules')
+    new.setDescription('Use entry fields below. If Pre-Defined is also selected, these new schedules will be created' \
+                       ' but not applied.')
+    new.setDefaultValue(true)
+    args << new
+
+    # Make double argument for loop setpoint temperature
+    loop_sp = OpenStudio::Measure::OSArgument.makeDoubleArgument('loop_sp', true)
+    loop_sp.setDisplayName('Loop Setpoint Temperature F:')
+    loop_sp.setDescription('This value replaces the existing loop temperature setpoint manager; the old manager will ' \
+                           'be disconnected but not deleted from the model.')
+    loop_sp.setDefaultValue(44)
+    args << loop_sp
+
+    # Make double argument for ice chiller outlet temp during partial storage operation
+    inter_sp = OpenStudio::Measure::OSArgument.makeDoubleArgument('inter_sp', false)
+    inter_sp.setDisplayName('Enter Intermediate Setpoint for Upstream Cooling Device During Ice Discharge F:')
+    inter_sp.setDescription('Partial storage only')
+    inter_sp.setDefaultValue(47)
+    args << inter_sp
+
+    # Make double argument for loop temperature for ice charging
+    chg_sp = OpenStudio::Measure::OSArgument.makeDoubleArgument('chg_sp', true)
+    chg_sp.setDisplayName('Ice Charging Setpoint Temperature F:')
+    chg_sp.setDefaultValue(25)
+    args << chg_sp
+
+    # Make double argument for loop design delta T
+    delta_t = OpenStudio::Measure::OSArgument.makeStringArgument('delta_t', true)
+    delta_t.setDisplayName('Loop Design Temperature Difference F:')
+    delta_t.setDescription('Enter numeric value to adjust selected loop settings.')
+    delta_t.setDefaultValue('Use Existing Loop Value')
+    args << delta_t
+
+    # Make string argument for ctes seasonal availabilty
+    ctes_season = OpenStudio::Measure::OSArgument.makeStringArgument('ctes_season', true)
+    ctes_season.setDisplayName('Enter Seasonal Availabity of Ice Storage:')
+    ctes_season.setDescription('Use MM/DD-MM/DD format')
+    ctes_season.setDefaultValue('01/01-12/31')
+    args << ctes_season
+
+    # Make string arguments for ctes discharge times
+    discharge_start = OpenStudio::Measure::OSArgument.makeStringArgument('discharge_start', true)
+    discharge_start.setDisplayName('Enter Starting Time for Ice Discharge:')
+    discharge_start.setDescription('Use 24 hour format (HR:MM)')
+    discharge_start.setDefaultValue('08:00')
+    args << discharge_start
+
+    discharge_end = OpenStudio::Measure::OSArgument.makeStringArgument('discharge_end', true)
+    discharge_end.setDisplayName('Enter End Time for Ice Discharge:')
+    discharge_end.setDescription('Use 24 hour format (HR:MM)')
+    discharge_end.setDefaultValue('21:00')
+    args << discharge_end
+
+    # Make string arguments for ctes charge times
+    charge_start = OpenStudio::Measure::OSArgument.makeStringArgument('charge_start', true)
+    charge_start.setDisplayName('Enter Starting Time for Ice charge:')
+    charge_start.setDescription('Use 24 hour format (HR:MM)')
+    charge_start.setDefaultValue('23:00')
+    args << charge_start
+
+    charge_end = OpenStudio::Measure::OSArgument.makeStringArgument('charge_end', true)
+    charge_end.setDisplayName('Enter End Time for Ice charge:')
+    charge_end.setDescription('Use 24 hour format (HR:MM)')
+    charge_end.setDefaultValue('07:00')
+    args << charge_end
+
+    # Make boolean arguments for ctes dischage days
+    wknds = OpenStudio::Measure::OSArgument.makeBoolArgument('wknds', true)
+    wknds.setDisplayName('Allow Ice Discharge on Weekends')
+    wknds.setDefaultValue(false)
+    args << wknds
+
+    # Make choice argument for output variable reporting frequency
+    report_choices = ['Detailed', 'Timestep', 'Hourly', 'Daily', 'Monthly', 'RunPeriod']
+    report_freq = OpenStudio::Measure::OSArgument.makeChoiceArgument('report_freq', report_choices, false)
+    report_freq.setDisplayName('Select Reporting Frequency for New Output Variables')
+    report_freq.setDescription('This will not change reporting frequency for existing output variables in the model.')
+    report_freq.setDefaultValue('Timestep')
+    args << report_freq
+
+    ## DR TESTER INPUTS -----------------------------------------
+    # Make boolean argument for use of demand response event test
+    dr = OpenStudio::Measure::OSArgument.makeBoolArgument('dr', false)
+    dr.setDisplayName('Test Demand Reponse Event')
+    dr.setDefaultValue(false)
+    args << dr
+
+    # Make choice argument for type of demand response event (add or shed)
+    dr_add_shed = OpenStudio::Measure::OSArgument.makeChoiceArgument('dr_add_shed', ['Add', 'Shed'], false)
+    dr_add_shed.setDisplayName('Select if a Load Add or Load Shed Event')
+    dr_add_shed.setDefaultValue('Shed')
+    args << dr_add_shed
+
+    # Make string argument for DR event date
+    dr_date = OpenStudio::Measure::OSArgument.makeStringArgument('dr_date', false)
+    dr_date.setDisplayName('Enter date of demand response event:')
+    dr_date.setDescription('Use MM/DD format.')
+    dr_date.setDefaultValue('9/19')
+    args << dr_date
+
+    # Make string argument for DR Event time
+    dr_time = OpenStudio::Measure::OSArgument.makeStringArgument('dr_time', false)
+    dr_time.setDisplayName('Enter start time of demand response event:')
+    dr_time.setDescription('Use 24 hour format (HR:MM)')
+    dr_time.setDefaultValue('11:30')
+    args << dr_time
+
+    # Make double argument for DR event duration
+    dr_dur = OpenStudio::Measure::OSArgument.makeDoubleArgument('dr_dur', false)
+    dr_dur.setDisplayName('Enter duration of demand response event [hr]:')
+    dr_dur.setDefaultValue(3)
+    args << dr_dur
+
+    # Make boolean argument for allowing chiller to back-up ice
+    dr_chill = OpenStudio::Measure::OSArgument.makeBoolArgument('dr_chill', false)
+    dr_chill.setDisplayName('Allow chiller to back-up ice during DR event')
+    dr_chill.setDescription('Unselection may result in unmet cooling hours')
+    dr_chill.setDefaultValue('false')
+    args << dr_chill
+    ## END DR TESTER INPUTS --------------------------------------
+
+    args
+  end
+
+  # define what happens when the measure is run
+  def run(model, runner, user_arguments)
+    super(model, runner, user_arguments)
+
+    # use the built-in error checking
+    unless runner.validateUserArguments(arguments(model), user_arguments)
+      return false
+    end
+
+    ## Arguments and Declarations---------------------------------------------------------------------------------------
+    # Assign user arguments to variables
+    objective = runner.getStringArgumentValue('objective', user_arguments)
+    upstream = runner.getStringArgumentValue('upstream', user_arguments)
+    storage_capacity = runner.getDoubleArgumentValue('storage_capacity', user_arguments)
+    melt_indicator = runner.getStringArgumentValue('melt_indicator', user_arguments)
+    selected_loop = runner.getStringArgumentValue('selected_loop', user_arguments)
+    selected_chiller = runner.getStringArgumentValue('selected_chiller', user_arguments)
+    chiller_resize_factor = runner.getDoubleArgumentValue('chiller_resize_factor', user_arguments)
+    chiller_limit = runner.getDoubleArgumentValue('chiller_limit', user_arguments)
+    old = runner.getBoolArgumentValue('old', user_arguments)
+    ctes_av = runner.getStringArgumentValue('ctes_av', user_arguments)
+    ctes_sch = runner.getStringArgumentValue('ctes_sch', user_arguments)
+    chill_sch = runner.getStringArgumentValue('chill_sch', user_arguments)
+    new = runner.getBoolArgumentValue('new', user_arguments)
+    loop_sp = runner.getDoubleArgumentValue('loop_sp', user_arguments)
+    inter_sp = runner.getDoubleArgumentValue('inter_sp', user_arguments)
+    chg_sp = runner.getDoubleArgumentValue('chg_sp', user_arguments)
+    delta_t = runner.getStringArgumentValue('delta_t', user_arguments)
+    ctes_season = runner.getStringArgumentValue('ctes_season', user_arguments)
+    discharge_start = runner.getStringArgumentValue('discharge_start', user_arguments)
+    discharge_end = runner.getStringArgumentValue('discharge_end', user_arguments)
+    charge_start = runner.getStringArgumentValue('charge_start', user_arguments)
+    charge_end = runner.getStringArgumentValue('charge_end', user_arguments)
+    wknds = runner.getBoolArgumentValue('wknds', user_arguments)
+    report_freq = runner.getStringArgumentValue('report_freq', user_arguments)
+
+    ## DR TESTER INPUTS ----------------------------------
+    dr = runner.getBoolArgumentValue('dr', user_arguments)
+    dr_add_shed = runner.getStringArgumentValue('dr_add_shed', user_arguments)
+    (dr_mon, dr_day) = runner.getStringArgumentValue('dr_date', user_arguments).split('/')
+    (dr_hr, dr_min) = runner.getStringArgumentValue('dr_time', user_arguments).split(':')
+    dr_dur = runner.getDoubleArgumentValue('dr_dur', user_arguments)
+    dr_chill = runner.getBoolArgumentValue('dr_chill', user_arguments)
+    dr_time = (dr_hr.to_f + (dr_min.to_f / 60)).round(2)
+    ## END DR TESTER INPUTS ------------------------------
+
+    # Declare useful variables with values set within do-loops
+    cond_loop = ''
+    ctes_sp_sched = ''
+    ctes_setpoint = 99.0 # This is a flag value and should be overwritten later
+    demand_sp_mgr = ''
+
+    ## Validate User Inputs---------------------------------------------------------------------------------------------
+
+    # Convert thermal storage capacity from ton-hours to GJ
+    storage_capacity = 0.0126606708 * storage_capacity
+
+    # Check for existence of charging setpoint temperature, reset to default if left blank.
+    if chg_sp.nil? || chg_sp >= 32.0
+      runner.registerWarning('An invalid ice charging temperature was entered. Value reset to -3.88 C (25.0 F).')
+      chg_sp = 25.0
+    elsif chg_sp < 20.0
+      runner.registerWarning('The ice charging temperature is set below 20 F; this is atypically low. Verify input.')
+    end
+
+    # Convert setpoint temperature inputs from F to C
+    loop_sp = (loop_sp - 32.0) / 1.8
+    inter_sp = (inter_sp - 32.0) / 1.8
+    chg_sp = (chg_sp - 32.0) / 1.8
+
+    # Check if both old and new are false, set new = true and report error
+    if !old && !new
+      runner.registerError('No CTES schedule option was selected; either use old schedules or the create new option. ' \
+                           'Measure aborted.')
+      return false
+    end
+
+    # Locate selected chiller and verify loop connection
+    if !model.getChillerElectricEIRByName(selected_chiller).empty?
+      ctes_chiller = model.getChillerElectricEIRByName(selected_chiller).get
+    elsif !model.getChillerAbsorptionByName(selected_chiller).empty?
+      ctes_chiller = model.getChillerAbsorptionByName(selected_chiller).get
+    elsif !model.getChillerAbsorptionIndirectByName(selected_chiller).empty?
+      ctes_chiller = model.getChillerAbsorptionIndirectByName(selected_chiller).get
+    end
+
+    ctes_loop = model.getModelObjectByName(selected_loop).get.to_PlantLoop.get
+
+    unless ctes_loop.components.include?(ctes_chiller)
+      runner.registerError('The selected chiller is not located on the selected chilled water loop. Measure aborted.')
+      return false
+    end
+
+    # Convert Delta T if needed from F to C (Overwrites string variables as floats)
+    if delta_t != 'Use Existing Loop Value' && delta_t.to_f > 0.0
+      delta_t = delta_t.to_f / 1.8
+    else
+      # Could add additional checks here for invalid (non-numerical) entries
+      delta_t = ctes_loop.sizingPlant.loopDesignTemperatureDifference
+    end
+
+    # Check chiller limit input values
+    if chiller_limit > 1.0
+      runner.registerWarning('Chiller limit must be a ratio less than 1. Limit set to 1.0.')
+      chiller_limit = 1.0
+    elsif chiller_limit < 0
+      runner.registerWarning('Chiller limit must be a ratio greater than or equal to 0. Limit set to 0.0' \
+                              ' (i.e. full storage).')
+      chiller_limit = 0.0
+    elsif chiller_limit < 0.15
+      runner.registerInfo('Chiller limit is below 15%; this may be outside the reasonable part load operating " \
+                          "window for the device. Consider increasing or setting to 0.')
+    end
+
+    # Convert chiller limit to a temperature value based on delta_t variable if != 1. Otherwise, use as flag for EMS
+    if chiller_limit < 1.0
+      dt_max = chiller_limit * delta_t # degrees C
+      runner.registerInfo("Max chiller dT during ice discharge is set to: #{dt_max.round(2)} C " \
+                          "(#{(dt_max * 1.8).round(2)} F).")
+    else
+      dt_max = delta_t
+    end
+
+    # Check limits of chiller performance curves and adjust if necessary - Notify user with WARNING
+    curve_output_check = false
+    cap_ft = ctes_chiller.coolingCapacityFunctionOfTemperature
+    min_x = cap_ft.minimumValueofx.to_f
+    if min_x > chg_sp
+      cap_ft.setMinimumValueofx(chg_sp)
+      runner.registerWarning("VERIFY CURVE VALIDITY: The input range for the '#{cap_ft.name}' curve is too " \
+                            'restrictive for use with ice charging. The provided curve has been ' \
+                            "extrapolated to a lower limit of #{chg_sp.round(2)} C for the 'x' variable.")
+      curve_output_check = true
+    end
+
+    eir_ft = ctes_chiller.electricInputToCoolingOutputRatioFunctionOfTemperature
+    min_x = eir_ft.minimumValueofx.to_f
+    if min_x > chg_sp
+      runner.registerWarning("VERIFY CURVE VALIDITY: The input range for the '#{eir_ft.name}' curve is too " \
+                            'restrictive for use with ice charging. The provided curve has been ' \
+                            "extrapolated to a lower limit of #{chg_sp.round(2)} C for the 'x' variable.")
+    end
+
+    # Report chiller performance derate at the ice-making conditions.
+    if curve_output_check == true
+      derate = cap_ft.evaluate(chg_sp, ctes_chiller.referenceEnteringCondenserFluidTemperature)
+      runner.registerInfo('A curve extrapolation warning was registered for the chiller capacity as a function ' \
+                          'of temperature curve. At normal ice making temperatures, a chiller derate to 60-70% ' \
+                          'of nominal capacity is expected. Using a condenser entering water temperature of ' \
+                          "#{ctes_chiller.referenceEnteringCondenserFluidTemperature.round(1)} C and the ice " \
+                          "charging temperature of #{chg_sp.round(1)} C, a derate to #{(derate * 100).round(1)}% is " \
+                          'returned. This value will increase with lower condenser fluid return temperatures.')
+    end
+
+    # Check to ensure schedules are selected if old = true
+    if old
+      if ctes_av == 'N/A'
+        runner.registerError('Pre-Defined schedule option chosen, but no availabity schedule was selected.')
+        runner.registerWarning('Measure terminated early; no storage was applied.')
+        return false
+      end
+      if ctes_sch == 'N/A'
+        runner.registerError('Pre-Defined schedule option chosen, but no ice tank setpoint schedule was selected.')
+        runner.registerWarning('Measure terminated early; no storage was applied.')
+        return false
+      end
+      if chill_sch == 'N/A'
+        runner.registerError('Pre-Defined schedule option chosen, but no chiller setpoint schedule was selected.')
+        runner.registerWarning('Measure terminated early; no storage was applied.')
+        return false
+      end
+    end
+
+    # Parse and verify schedule inputs
+    # Remove potential spaces from date inputs
+    ctes_season = ctes_season.delete(' ')
+
+    # Convert HR:MM format into HR.fraction format
+    (d_start_hr, d_start_min) = discharge_start.split(':')
+    (d_end_hr, d_end_min) = discharge_end.split(':')
+    (c_start_hr, c_start_min) = charge_start.split(':')
+    (c_end_hr, c_end_min) = charge_end.split(':')
+
+    # Store re-formatted time values in shorthand variables for use in schedule
+    # building
+    ds = (d_start_hr.to_f + d_start_min.to_f / 60).round(2)
+    de = (d_end_hr.to_f + d_end_min.to_f / 60).round(2)
+    cs = (c_start_hr.to_f + c_start_min.to_f / 60).round(2)
+    ce = (c_end_hr.to_f + c_end_min.to_f / 60).round(2)
+
+    # Verify that input times make sense
+    if ds > de
+      runner.registerWarning('Dischage start time is later than discharge ' \
+                             'end time (your ice will discharge overnight). ' \
+                             'Verify schedule inputs.')
+    end
+
+    if cs.between?(ds - 0.01, de + 0.01) || ce.between?(ds - 0.01, de + 0.01)
+      runner.registerWarning('The tank charge and discharge periods overlap. ' \
+                             'Examine results for unexpected operation; ' \
+                             'verify schedule inputs.')
+    end
+
+    if [ds, de, cs, ce].any? { |i| i > 24 }
+      runner.registerError('One of you time enteries exceeds 24:00, ' \
+                           'resulting in a schedule error. Measure aborted.')
+      return false
+    end
+
+    ## Report Initial Condition of the Model----------------------------------------------------------------------------
+    total_storage = model.getThermalStorageIceDetaileds.size
+    runner.registerInitialCondition("The model started with #{total_storage} ice storage device(s).")
+
+    runner.registerInfo("Chiller '#{selected_chiller}' on Loop '#{selected_loop}' was selected for the addition " \
+                        "of a #{storage_capacity.round(2)} GJ (#{(storage_capacity / 0.0126606708).round(0)} " \
+                        'ton-hours) ice thermal energy storage object.')
+
+    ## Modify Chiller Settings------------------------------------------------------------------------------------------
+
+    # Adjust ctes chiller minimum outlet temperature
+    ctes_chiller.setLeavingChilledWaterLowerTemperatureLimit(chg_sp)
+    runner.registerInfo("Selected chiller minimum setpoint temperature was adjusted to #{chg_sp.round(2)} C " \
+                        "(#{(chg_sp * 1.8) + 32} F).")
+
+    # Adjust ctes chiller sizing factor based on user input
+    if ctes_chiller.isReferenceCapacityAutosized
+      ctes_chiller.setSizingFactor(chiller_resize_factor)
+      runner.registerInfo("Selected chiller has been resized to #{chiller_resize_factor * 100}% of autosized " \
+                          'capacity.')
+    else
+      ctes_chiller.setReferenceCapacity(
+        chiller_resize_factor * ctes_chiller.referenceCapacity.to_f
+      )
+      runner.registerInfo("Selected chiller has been resized to #{chiller_resize_factor * 100}% of original " \
+                          '(hardsized) capacity.')
+    end
+
+    ## Modify Loop Settings---------------------------------------------------------------------------------------------
+
+    # Adjust minimum loop temperature
+    ctes_loop.setMinimumLoopTemperature(chg_sp)
+    runner.registerInfo("Selected loop minimum temperature was adjusted to #{chg_sp.round(2)} C " \
+                        "(#{(chg_sp * 1.8) + 32} F).")
+
+    # Adjust plant load distribution scheme
+    if ctes_loop.loadDistributionScheme != 'SequentialLoad'
+      ctes_loop.setLoadDistributionScheme('SequentialLoad')
+      runner.registerInfo("Selected loop load distribution scheme was set to 'SequentialLoad'.")
+    end
+
+    # Adjust loop design temperature difference
+    ctes_loop.sizingPlant.setLoopDesignTemperatureDifference(delta_t)
+    runner.registerInfo("Selected loop design temperature difference was set to #{delta_t.round(2)} C " \
+                        "(#{delta_t * 1.8} F).")
+
+    # Adjust loop gylcol solution percentage and set glycol - if necessary
+    if ctes_loop.fluidType == 'Water'
+      ctes_loop.setFluidType('EthyleneGlycol')
+      ctes_loop.setGlycolConcentration(25)
+      runner.registerInfo('Selected loop working fluid changed to ethylene glycol at a 25% concentration.')
+    elsif ctes_loop.glycolConcentration < 25
+      runner.registerInfo('Selected loop gylycol concentration is less than 25%. Consider increasing to 25-30%.')
+    end
+
+    # Adjust loop to two-way common pipe simulation - if necessary
+    if ctes_loop.commonPipeSimulation != 'TwoWayCommonPipe'
+      ctes_loop.setCommonPipeSimulation('TwoWayCommonPipe')
+      runner.registerInfo("Selected loop common pipe simulation changed to 'TwoWayCommonPipe'.")
+
+      # Add setpoint manager at inlet of demand loop (req'd for two-way common pipe sim.)
+      if old # Only applies if old curves are used, regardless of whether new curves are created (old takes precedence)
+        loop_sp_node = ctes_loop.loopTemperatureSetpointNode
+        loop_sp_mgrs = loop_sp_node.setpointManagers
+        loop_sp_mgrs.each do |spm|
+          if spm.controlVariable == 'Temperature'
+            demand_sp_mgr = spm.clone.to_SetpointManagerScheduled.get
+          end
+        end
+        demand_sp_mgr.addToNode(ctes_loop.demandInletNode)
+        runner.registerInfo('Original loop temperature setpoint manager duplicated and added to demand loop inlet node.')
+      end
+
+    end
+
+    ## Create CTES Hardware---------------------------------------------------------------------------------------------
+
+    # Create ice tank (aka ctes)
+    ctes = OpenStudio::Model::ThermalStorageIceDetailed.new(model)
+    ctes.setCapacity(storage_capacity)
+    ctes.setThawProcessIndicator(melt_indicator)
+
+    # Add ice tank to loop based on user-selected objective option and upstream device
+    if objective == 'Full Storage'
+      # Full storage places the ice tank upstream of the chiller with no user option to change.
+      ctes.addToNode(ctes_chiller.supplyInletModelObject.get.to_Node.get)
+    elsif objective == 'Partial Storage' && upstream == 'Storage'
+      ctes.addToNode(ctes_chiller.supplyInletModelObject.get.to_Node.get)
+    elsif objective == 'Partial Storage' && upstream == 'Chiller'
+      ctes.addToNode(ctes_chiller.supplyOutletModelObject.get.to_Node.get)
+    end
+
+    ## Create New Schedules if Necessary--------------------------------------------------------------------------------
+    #-------------------------------------------------------------------------------------------------------------------
+    if new
+      ## Check for Schedule Type Limits and Create if Needed------------------------------------------------------------
+      if model.getModelObjectByName('OnOff').get.initialized
+        sched_limits_onoff = model.getModelObjectByName('OnOff').get.to_ScheduleTypeLimits.get
+      else
+        sched_limits_onoff = OpenStudio::Model::ScheduleTypeLimits.new(model)
+        sched_limits_onoff.setName('OnOff')
+        sched_limits_onoff.setNumericType('Discrete')
+        sched_limits_onoff.setUnitType('Availability')
+        sched_limits_onoff.setLowerLimitValue(0.0)
+        sched_limits_onoff.setUpperLimitValue(1.0)
+      end
+
+      if model.getModelObjectByName('Temperature').get.initialized
+        sched_limits_temp = model.getModelObjectByName('Temperature').get.to_ScheduleTypeLimits.get
+        if sched_limits_temp.lowerLimitValue.to_f > chg_sp
+          sched_limits_temp.setLowerLimitValue(chg_sp)
+        end
+      else
+        sched_limits_temp = OpenStudio::Model::ScheduleTypeLimits.new(model)
+        sched_limits_temp.setName('Temperature')
+        sched_limits_temp.setNumericType('Continuous')
+        sched_limits_temp.setUnitType('Temperature')
+      end
+
+      ## Create Schedules-----------------------------------------------------------------------------------------------
+
+      # Create key-value sets based on user inputs for charge/discharge times
+      # cs = charge start, ce = charge end, ds = discharge start, de = discharge end
+
+      # Set chiller and ice discharge setpoints for partial storage configs
+      case objective
+      when 'Full Storage'
+        chiller_setpoint = loop_sp
+        ctes_setpoint = loop_sp
+      when 'Partial Storage'
+        case upstream
+        when 'Chiller'
+          chiller_setpoint = inter_sp
+          ctes_setpoint = loop_sp
+        when 'Storage'
+          chiller_setpoint = loop_sp
+          ctes_setpoint = inter_sp
+        end
+      end
+
+      # Handle overnight charging and discharging
+      if ce < cs
+        midnight_av = [24, 1]
+        midnight_chiller = [24, chg_sp]
+        midnight_ctes = [24, loop_sp]
+      elsif de < ds
+        midnight_av = [24, 1]
+        midnight_chiller = [24, chiller_setpoint]
+        midnight_ctes = [24, ctes_setpoint]
+      else
+        midnight_av = [24, 0]
+        midnight_chiller = [24, loop_sp]
+        midnight_ctes = [24, 99]
+      end
+
+      # Availablity k-v sets for CTES
+      wk_av = [[cs, 0], [ce, 1], [ds, 0], [de, 1], midnight_av].sort
+      wknd_av = [[cs, 0], [ce, 1], midnight_av].sort
+
+      # Temperature k-v sets for CTES
+      wk_ctes = [[cs, 99], [ce, loop_sp], [ds, 99], [de, ctes_setpoint], midnight_ctes].sort
+      wknd_ctes = [[cs, 99], [ce, loop_sp], midnight_ctes].sort
+
+      # Temperature k-v set for Chiller
+      wk_chiller = [[cs, loop_sp], [ce, chg_sp], [ds, loop_sp], [de, chiller_setpoint], midnight_chiller].sort
+      wknd_chiller = [[cs, loop_sp], [ce, chg_sp], midnight_chiller].sort
+
+      # Apply weekends modifer if necessary
+      if wknds
+        wknd_av = wk_av
+        wknd_ctes = wk_ctes
+        wknd_chiller = wk_chiller
+      end
+
+      # Create ice availability schedule
+      ruleset_name = 'Ice Availability Schedule (New)'
+      winter_design_day = [[24, 0]]
+      summer_design_day = wk_av
+      default_day = ['AllDays'] + [[24, 0]]
+      rules = []
+      rules << ['Weekend', ctes_season, 'Sat/Sun'] + wknd_av
+      rules << ['Summer Weekday', ctes_season, 'Mon/Tue/Wed/Thu/Fri'] + wk_av
+      options_ctes = { 'name' => ruleset_name,
+                       'winter_design_day' => winter_design_day,
+                       'summer_design_day' => summer_design_day,
+                       'default_day' => default_day,
+                       'rules' => rules }
+      ctes_av_new = OsLib_Schedules.createComplexSchedule(model, options_ctes)
+      ctes_av_new.setScheduleTypeLimits(sched_limits_onoff)
+
+      # Create ctes setpoint temperature schedule
+      ruleset_name = "#{ctes.name} Setpoint Schedule (New)"
+      winter_design_day = [[24, 99]]
+      summer_design_day = wk_ctes
+      default_day = ['AllDays'] + [[24, 99]]
+      rules = []
+      rules << ['Weekend', ctes_season, 'Sat/Sun'] + wknd_ctes
+      rules << ['Summer Weekday', ctes_season, 'Mon/Tue/Wed/Thu/Fri'] + wk_ctes
+      options_ctes_ctes = { 'name' => ruleset_name,
+                            'winter_design_day' => winter_design_day,
+                            'summer_design_day' => summer_design_day,
+                            'default_day' => default_day,
+                            'rules' => rules }
+      ctes_sch_new = OsLib_Schedules.createComplexSchedule(model, options_ctes_ctes)
+      ctes_sch_new.setScheduleTypeLimits(sched_limits_temp)
+
+      # Create chiller setpoint temperature schedule
+      ruleset_name = "#{ctes_chiller.name} Setpoint Schedule (New)"
+      winter_design_day = [[24, loop_sp]]
+      summer_design_day = wk_chiller
+      default_day = ['AllDays'] + [[24, loop_sp]]
+      rules = []
+      rules << ['Weekend', ctes_season, 'Sat/Sun'] + wknd_chiller
+      rules << ['Summer Weekday', ctes_season, 'Mon/Tue/Wed/Thu/Fri'] + wk_chiller
+      options_ctes_chiller = { 'name' => ruleset_name,
+                               'winter_design_day' => winter_design_day,
+                               'summer_design_day' => summer_design_day,
+                               'default_day' => default_day,
+                               'rules' => rules }
+      chill_sch_new = OsLib_Schedules.createComplexSchedule(model, options_ctes_chiller)
+      chill_sch_new.setScheduleTypeLimits(sched_limits_temp)
+
+      # Create loop setpoint temperature schedule - if new = true
+      if new
+        ruleset_name = "#{ctes_loop.name} Setpoint Schedule (New)"
+        options_ctes_loop = { 'name' => ruleset_name,
+                              'winterTimeValuePairs' => [[24, loop_sp]],
+                              'summerTimeValuePairs' => [[24, loop_sp]],
+                              'defaultTimeValuePairs' => [[24, loop_sp]] }
+        loop_sch_new = OsLib_Schedules.createSimpleSchedule(model, options_ctes_loop)
+        loop_sch_new.setScheduleTypeLimits(sched_limits_temp)
+      end
+
+      # Register info about new schedule objects
+      runner.registerInfo("The following schedules were added to the model:\n" \
+                          "   * #{ctes_av_new.name}\n" \
+                          "   * #{ctes_sch_new.name}\n" \
+                          "   * #{chill_sch_new.name}\n" \
+                          "   * #{loop_sch_new.name}")
+
+      if old
+        runner.registerInfo('However, these schedules are not used in favor of those pre-defined by the user.')
+      end
+
+    end
+    # end of new schedule build-----------------------------------------------------------------------------------------
+    #-------------------------------------------------------------------------------------------------------------------
+
+    ## Create Component Setpoint Objects--------------------------------------------------------------------------------
+
+    if old
+      ctes_avail_sched = model.getScheduleRulesetByName(ctes_av).get
+      ctes_temp_sched = model.getScheduleRulesetByName(ctes_sch).get
+      chill_temp_sched = model.getScheduleRulesetByName(chill_sch).get
+    elsif new
+      ctes_avail_sched = ctes_av_new
+      ctes_temp_sched = ctes_sch_new
+      chill_temp_sched = chill_sch_new
+    end
+
+    # Apply ice availability schedule
+    ctes.setAvailabilitySchedule(ctes_avail_sched)
+
+    # Add component setpoint manager for ice tank
+    ctes_sp_mgr = OpenStudio::Model::SetpointManagerScheduled.new(model, ctes_temp_sched)
+    ctes_sp_mgr.addToNode(ctes.outletModelObject.get.to_Node.get)
+    ctes_sp_mgr.setName("#{ctes.name} Setpoint Manager")
+
+    # Add component setpoint manager for ctes chiller
+    chill_sp_mgr = OpenStudio::Model::SetpointManagerScheduled.new(model, chill_temp_sched)
+    chill_sp_mgr.addToNode(ctes_chiller.supplyOutletModelObject.get.to_Node.get)
+    chill_sp_mgr.setName("#{ctes_chiller.name} Setpoint Manager")
+
+    # Replace existing loop setpoint manager - if new = true and old = false
+    if new && !old
+      loop_sp_node = ctes_loop.loopTemperatureSetpointNode
+      loop_sp_mgrs = loop_sp_node.setpointManagers
+      loop_sp_mgrs.each do |spm|
+        next unless ['Temperature', 'MinimumTemperature', 'MaximumTemperature'].include?(spm.controlVariable)
+
+        spm.disconnect
+        runner.registerInfo("Selected loop temperature setpoint manager '#{spm.name}' " \
+                  "with control variable '#{spm.controlVariable}' was disconnected.")
+      end
+
+      loop_sp_mgr = OpenStudio::Model::SetpointManagerScheduled.new(model, loop_sch_new)
+      loop_sp_mgr.addToNode(loop_sp_node)
+      loop_sp_mgr.setName("#{ctes_loop.name} Setpoint Manager (New)")
+
+      demand_sp_mgr = loop_sp_mgr.clone.to_SetpointManagerScheduled.get
+      demand_sp_mgr.addToNode(ctes_loop.demandInletNode)
+      demand_sp_mgr.setName("#{ctes_loop.name} Demand Side Setpoint Manager (New)")
+    end
+
+    # Register info about new schedule objects
+    runner.registerInfo('The following component temperature setpoint managers were added to the ' \
+                        "model:\n" \
+                        "   * #{ctes_sp_mgr.name}\n" \
+                        "   * #{chill_sp_mgr.name}")
+
+    if old # Old Schedules always take precedence, even if new ones are also created
+      runner.registerInfo("The following schedules ared used in the model:\n" \
+                         "   * #{ctes_avail_sched.name}\n" \
+                         "   * #{ctes_temp_sched.name}\n" \
+                         "   * #{chill_temp_sched.name}")
+      runner.registerInfo('The following loop temperature setpoint manager was added to the ' \
+                        "model:\n" \
+                        "   * #{demand_sp_mgr.name}")
+    elsif new && !old
+      runner.registerInfo('The following loop temperature setpoint managers were added to the ' \
+                         "model:\n" \
+                         "   * #{loop_sp_mgr.name}\n" \
+                         "   * #{demand_sp_mgr.name}")
+    end
+
+    ## Create General EMS Variables for Chiller and TES Capacities------------------------------------------------------
+
+    # Chiller Nominal Capacity Internal Variable
+    evar_chiller_cap = OpenStudio::Model::EnergyManagementSystemInternalVariable.new(model, 'Chiller Nominal Capacity')
+    evar_chiller_cap.setInternalDataIndexKeyName(ctes_chiller.name.to_s)
+    evar_chiller_cap.setName('CTES_Chiller_Capacity')
+
+    # Ice Tank thermal storage capacity - Empty Global Variable
+    evar_tes_cap = OpenStudio::Model::EnergyManagementSystemGlobalVariable.new(model, 'TES_Cap')
+
+    # Set TES Capacity from User Inputs
+    set_tes_cap = OpenStudio::Model::EnergyManagementSystemProgram.new(model)
+    set_tes_cap.setName('Set_TES_Cap')
+    body = <<-EMS
+      SET TES_Cap = #{storage_capacity}
+    EMS
+    set_tes_cap.setBody(body)
+
+    set_tes_cap_pcm = OpenStudio::Model::EnergyManagementSystemProgramCallingManager.new(model)
+    set_tes_cap_pcm.setName('Set_TES_Cap_CallMgr')
+    set_tes_cap_pcm.setCallingPoint('BeginNewEnvironment')
+    set_tes_cap_pcm.addProgram(set_tes_cap)
+
+    ## Create EMS Components to Control Load on Upstream (Priority) Device----------------------------------------------
+
+    # Flag value indicating that a chiller limiter is required or DR Test is Activated
+    if chiller_limit < 1.0 || dr == true
+
+      # Set up EMS output
+      output_ems = model.getOutputEnergyManagementSystem
+      output_ems.setActuatorAvailabilityDictionaryReporting('Verbose')
+      output_ems.setInternalVariableAvailabilityDictionaryReporting('Verbose')
+      output_ems.setEMSRuntimeLanguageDebugOutputLevel('None')
+
+      runner.registerInfo("A #{(chiller_limit * 100).round(2)}% capacity limit has been placed on the chiller " \
+                        'during ice discharge. EMS scripting is employed to actuate this control via chiller ' \
+                        'outlet setpoint. ')
+
+      # Internal and Global Variable(s)
+
+      # Chiller Limited Capacity for Ice Discharge Period - Empty Global Variable
+      evar_chiller_limit = OpenStudio::Model::EnergyManagementSystemGlobalVariable.new(model, 'Chiller_Limited_Capacity')
+
+      # Instances of Chiller Limit Application - Empty Global Variable
+      evar_limit_counter = OpenStudio::Model::EnergyManagementSystemGlobalVariable.new(model, 'Limit_Counter')
+
+      # Max Delta-T for Chiller De-Rate - Empty Global Variable
+      dt_ems = OpenStudio::Model::EnergyManagementSystemGlobalVariable.new(model, 'DT_Max')
+
+      # DR In-Progress Flag - Empty Global Variable
+      dr_flag = OpenStudio::Model::EnergyManagementSystemGlobalVariable.new(model, 'DR_Flag')
+
+      # Sensor(s)
+      # Evaporator Entering Water Temperature
+      eewt = OpenStudio::Model::EnergyManagementSystemSensor.new(model, 'Chiller Evaporator Inlet Temperature')
+      eewt.setName('EEWT')
+      eewt.setKeyName(ctes_chiller.name.to_s)
+
+      # Evaporator Leaving Water Temperature
+      elwt = OpenStudio::Model::EnergyManagementSystemSensor.new(model, 'Chiller Evaporator Outlet Temperature')
+      elwt.setName('ELWT')
+      elwt.setKeyName(ctes_chiller.name.to_s)
+
+      # Evaporator Leave Water Temperature Setpoint
+      elwt_sp = OpenStudio::Model::EnergyManagementSystemSensor.new(model, 'Schedule Value')
+      elwt_sp.setName('SP')
+      elwt_sp.setKeyName(chill_temp_sched.name.to_s)
+
+      # Supply Water Temperature Setpoint
+      swt_sp = OpenStudio::Model::EnergyManagementSystemSensor.new(model, 'System Node Setpoint Temperature')
+      swt_sp.setName('SWT_SP')
+      swt_sp.setKeyName(ctes_loop.supplyOutletNode.name.to_s)
+
+      # Ice Tank Availability Schedule
+      av_sp = OpenStudio::Model::EnergyManagementSystemSensor.new(model, 'Schedule Value')
+      av_sp.setName('ICE_AV')
+      av_sp.setKeyName(ctes.availabilitySchedule.get.name.to_s)
+
+      # Ice Tank Leaving Water Temperature
+      ilwt = OpenStudio::Model::EnergyManagementSystemSensor.new(model, 'System Node Temperature')
+      ilwt.setName('ILWT')
+      ilwt.setKeyName(ctes.outletModelObject.get.name.to_s)
+
+      # Ice Tank State of Charge
+      soc = OpenStudio::Model::EnergyManagementSystemSensor.new(model, 'Ice Thermal Storage End Fraction')
+      soc.setName('SOC')
+      soc.setKeyName(ctes.name.to_s)
+
+      # Actuator(s)
+      # Evaporator Leaving Water Temperature Septoint Node Actuator
+      elwt = OpenStudio::Model::EnergyManagementSystemActuator.new(ctes_chiller.supplyOutletModelObject.get,
+                                                                   'System Node Setpoint', 'Temperature Setpoint')
+      elwt.setName('ELWT_SP')
+    end
+
+    if chiller_limit < 1.0
+      # Program(s)
+      # Apply Chiller Capacity Limit During Ice Discharge
+      chiller_limit_program = OpenStudio::Model::EnergyManagementSystemProgram.new(model)
+      chiller_limit_program.setName('Chiller_Limiter')
+      body = <<-EMS
+  		IF ( ICE_AV == 1 ) && ( SP >= SWT_SP ) && ( DR_Flag <> 1 )
+  		 	IF ( EEWT - SP ) > DT_Max
+  		    	SET ELWT_SP = ( EEWT - DT_Max )
+  		    	SET Limit_Counter = ( Limit_Counter + ( SystemTimeStep / ZoneTimeStep ) )
+  		  	ELSE
+  		    	SET ELWT_SP = SP
+  		  	ENDIF
+  		ELSE
+  		  	SET ELWT_SP = SP
+  		ENDIF
+      EMS
+      chiller_limit_program.setBody(body)
+
+      # Determine Capacity Limit of the Chiller in Watts (Also initializes limit counter)
+      chiller_limit_calculation = OpenStudio::Model::EnergyManagementSystemProgram.new(model)
+      chiller_limit_calculation.setName('Chiller_Limit_Calc')
+      body = <<-EMS
+  			SET Chiller_Limited_Capacity = ( #{chiller_limit} * CTES_Chiller_Capacity )
+  			SET Limit_Counter = 0
+  			SET DR_Flag = 0
+        SET DT_Max = #{dt_max}
+      EMS
+      chiller_limit_calculation.setBody(body)
+
+      # Program Calling Manager(s)
+      chiller_limit_pcm = OpenStudio::Model::EnergyManagementSystemProgramCallingManager.new(model)
+      chiller_limit_pcm.setName('Chiller_Limiter_CallMgr')
+      chiller_limit_pcm.setCallingPoint('InsideHVACSystemIterationLoop')
+      chiller_limit_pcm.addProgram(chiller_limit_program)
+
+      chiller_limit_calc_pcm = OpenStudio::Model::EnergyManagementSystemProgramCallingManager.new(model)
+      chiller_limit_calc_pcm.setName('Chiller_Limit_Calc_CallMgr')
+      chiller_limit_calc_pcm.setCallingPoint('BeginNewEnvironment')
+      chiller_limit_calc_pcm.addProgram(chiller_limit_calculation)
+
+      # EMS Output Variable(s) - Chiller Limiter Dependent
+      eout_chiller_limit = OpenStudio::Model::EnergyManagementSystemOutputVariable.new(model, evar_chiller_limit)
+      eout_chiller_limit.setName('Chiller Limited Capacity')
+
+      eout_limit_counter = OpenStudio::Model::EnergyManagementSystemOutputVariable.new(model, evar_limit_counter)
+      eout_limit_counter.setName('Chiller Limit Counter')
+
+    end
+
+    ## DR EVENT TESTER EMS --------------------------
+    ## Add Demand Response Event Tester if Applicable (EMS Controller Override)-----------------------------------------
+
+    if dr
+
+      # Create EMS Script that:
+      # => 1. Determines if DR Event has been triggered (inspects date/time)
+      # => 2. Actuates full storage if in a Load Shed DR event
+      # => 3. Actuates ice charging/chiller @ max if in a Load Add DR event
+      # => 4. Allows staged chiller ramp if ice runs out (if selected by user)
+
+      # Create DR EMS Program
+      dr_program = OpenStudio::Model::EnergyManagementSystemProgram.new(model)
+      dr_program.setName('Demand_Response_Pgm')
+
+      # Define Program Script Based on Permission of Chiller to Operate to Meet Load
+      if dr_chill && dr_add_shed == 'Shed'	# Chiller is permitted to pick up unmet load
+        body = <<-EMS
+			IF ( Month == #{dr_mon} ) && ( DayOfMonth == #{dr_day} )
+				IF ( CurrentTime > #{dr_time} ) && ( CurrentTime <= #{dr_time + dr_dur} )
+					SET DR_Flag = 1
+          IF ( ILWT - SWT_SP < 0.05 )
+					  SET ELWT_SP = EEWT
+          ELSEIF ( ILWT - SWT_SP <= 0.33 * DT_Max )
+            SET ELWT_SP = EEWT - ( 0.33 * DT_Max )
+          ELSEIF ( ILWT - SWT_SP <= 0.67 * DT_Max )
+            SET ELWT_SP = EEWT - ( 0.67 * DT_Max )
+          ELSE
+            SET ELWT_SP = ( EEWT - DT_Max )
+            SET Limit_Counter = ( Limit_Counter + ( SystemTimeStep / ZoneTimeStep ) )
+					ENDIF
+				ELSEIF ( DR_Flag == 1 )
+					SET DR_Flag = 0
+          SET ELWT_SP = SP
+				ENDIF
+			ENDIF
+        EMS
+        dr_program.setBody(body)
+      elsif !dr_chill && dr_add_shed == 'Shed'	# Chiller is not permitted to pick up unmet load when ice is deficient
+        body = <<-EMS
+			IF ( Month == #{dr_mon} ) && ( DayOfMonth == #{dr_day} )
+				IF ( CurrentTime > #{dr_time} ) && ( CurrentTime <= #{dr_time + dr_dur} )
+					SET DR_Flag = 1
+					SET ELWT_SP = EEWT + 10.0
+				ELSEIF ( DR_Flag == 1 )
+					SET DR_Flag = 0
+				ENDIF
+			ENDIF
+        EMS
+        dr_program.setBody(body)
+      elsif dr_add_shed == 'Add'
+        body = <<-EMS
+      IF ( Month == #{dr_mon} ) && ( DayOfMonth == #{dr_day} )
+				IF ( CurrentTime > #{dr_time} ) && ( CurrentTime <= #{dr_time + dr_dur} )
+          SET DR_Flag = 1
+          IF ( SOC < 0.99 ) && ( ICE_AV == 1 )
+            SET ELWT_SP = #{chg_sp}
+          ELSEIF SOC > 0.95
+            SET ELWT_SP = SWT_SP
+          ENDIF
+        ELSEIF ( DR_Flag == 1 )
+          SET DR_Flag = 0
+        ENDIF
+      ENDIF
+        EMS
+        dr_program.setBody(body)
+      end
+
+      # Create DR EMS Program Calling Manager
+      dr_pcm = OpenStudio::Model::EnergyManagementSystemProgramCallingManager.new(model)
+      dr_pcm.setName('Demand_Response_PCM')
+      dr_pcm.setCallingPoint('InsideHVACSystemIterationLoop')
+      dr_pcm.addProgram(dr_program)
+
+      # EMS Output Variable(s)
+      eout_drflag = OpenStudio::Model::EnergyManagementSystemOutputVariable.new(model, dr_flag)
+      eout_drflag.setName('Demand Response Flag')
+    end
+    ## END DR EVENT TESTER EMS ---------------------
+
+    ## Add Output Variables and Meters----------------------------------------------------------------------------------
+
+    # EMS Output Variable(s) - Chiller Limit Independent
+    eout_chiller_cap = OpenStudio::Model::EnergyManagementSystemOutputVariable.new(model, evar_chiller_cap)
+    eout_chiller_cap.setName('Chiller Nominal Capacity')
+
+    eout_tes_cap = OpenStudio::Model::EnergyManagementSystemOutputVariable.new(model, evar_tes_cap)
+    eout_tes_cap.setName('Ice Thermal Storage Capacity')
+
+    # Identify existing output variables
+    vars = model.getOutputVariables
+    var_names = []
+    vars.each do |v|
+      var_names << v.variableName
+    end
+
+    # List names of desired output variables
+    ovar_names = ['Ice Thermal Storage Cooling Rate',
+                  'Ice Thermal Storage Cooling Charge Rate',
+                  'Ice Thermal Storage Cooling Discharge Rate',
+                  'Ice Thermal Storage Cooling Charge Energy',
+                  'Ice Thermal Storage Cooling Discharge Energy',
+                  'Ice Thermal Storage Cooling Discharge Energy',
+                  'Ice Thermal Storage End Fraction',
+                  'Ice Thermal Storage On Coil Fraction',
+                  'Ice Thermal Storage Mass Flow Rate',
+                  'Ice Thermal Storage Tank Mass Flow Rate',
+                  'Ice Thermal Storage Bypass Mass Flow Rate',
+                  'Ice Thermal Storage Fluid Inlet Temperature',
+                  'Ice Thermal Storage Tank Outlet Temperature',
+                  'Ice Thermal Storage Blended Outlet Temperature',
+                  'Ice Thermal Storage Ancillary Electric Power',
+                  'Ice Thermal Storage Ancillary Electric Energy',
+                  'Chiller COP',
+                  'Chiller Cycling Ratio',
+                  'Chiller Part Load Ratio',
+                  'Chiller Electric Power',
+                  'Chiller Electric Energy',
+                  'Chiller Evaporator Cooling Rate',
+                  'Chiller Evaporator Cooling Energy',
+                  'Chiller Condenser Heat Transfer Rate',
+                  'Chiller Condenser Heat Transfer Energy',
+                  'Chiller False Load Heat Transfer Rate',
+                  'Chiller False Load Heat Transfer Energy',
+                  'Chiller Evaporator Inlet Temperature',
+                  'Chiller Evaporator Outlet Temperature',
+                  'Chiller Evaporator Mass Flow Rate',
+                  'Site Outdoor Air Drybulb Temperature',
+                  'Site Outdoor Air Wetbulb Temperature']
+
+    # Create new output variables if they do not already exist
+    ovars = []
+    ovar_names.each do |nm|
+      # if !var_names.include?(nm)
+      ovars << OpenStudio::Model::OutputVariable.new(nm, model)
+      # end
+    end
+
+    # Create output variable for loop demand inlet temperature
+    v = OpenStudio::Model::OutputVariable.new('System Node Temperature', model)
+    v.setKeyValue(ctes_loop.demandInletNode.name.to_s)
+    ovars << v
+
+    # Create output variable for loop demand outlet temperature
+    v = OpenStudio::Model::OutputVariable.new('System Node Temperature', model)
+    v.setKeyValue(ctes_loop.demandOutletNode.name.to_s)
+    ovars << v
+
+    # Create output variable for loop supply inlet temperature
+    v = OpenStudio::Model::OutputVariable.new('System Node Temperature', model)
+    v.setKeyValue(ctes_loop.supplyInletNode.name.to_s)
+    ovars << v
+
+    # Create output variable for loop supply outlet temperature
+    v = OpenStudio::Model::OutputVariable.new('System Node Temperature', model)
+    v.setKeyValue(ctes_loop.supplyOutletNode.name.to_s)
+    ovars << v
+
+    # Create output variable for chiller inlet temperature
+    v = OpenStudio::Model::OutputVariable.new('System Node Temperature', model)
+    v.setKeyValue(ctes_chiller.supplyInletModelObject.get.name.to_s)
+    ovars << v
+
+    # Create output variable for chiller outlet temperature
+    v = OpenStudio::Model::OutputVariable.new('System Node Temperature', model)
+    v.setKeyValue(ctes_chiller.supplyOutletModelObject.get.name.to_s)
+    ovars << v
+
+    # Create output variable for ice tank inlet temperature
+    v = OpenStudio::Model::OutputVariable.new('System Node Temperature', model)
+    v.setKeyValue(ctes.inletModelObject.get.name.to_s)
+    ovars << v
+
+    # Create output variable for ice tank outlet temperature
+    v = OpenStudio::Model::OutputVariable.new('System Node Temperature', model)
+    v.setKeyValue(ctes.outletModelObject.get.name.to_s)
+    ovars << v
+
+    # Create output variables for the new operating schedules
+    v = OpenStudio::Model::OutputVariable.new('Schedule Value', model)
+    v.setKeyValue(ctes_avail_sched.name.to_s)
+    ovars << v
+
+    v = OpenStudio::Model::OutputVariable.new('Schedule Value', model)
+    v.setKeyValue(ctes_temp_sched.name.to_s)
+    ovars << v
+
+    v = OpenStudio::Model::OutputVariable.new('Schedule Value', model)
+    v.setKeyValue(chill_temp_sched.name.to_s)
+    ovars << v
+
+    # Create output variable for plant loop setpoint temperature - if new = true
+    if new
+      v = OpenStudio::Model::OutputVariable.new('Schedule Value', model)
+      v.setKeyValue(loop_sch_new.name.to_s)
+      ovars << v
+    end
+
+    # Create output variables for ice discharge performance curve
+    v = OpenStudio::Model::OutputVariable.new('Performance Curve Input Variable 1 Value', model)
+    v.setKeyValue(ctes.dischargingCurve.name.to_s)
+    v.setName('Discharge Curve Input Value 1')
+    ovars << v
+
+    v = OpenStudio::Model::OutputVariable.new('Performance Curve Input Variable 2 Value', model)
+    v.setKeyValue(ctes.dischargingCurve.name.to_s)
+    v.setName('Discharge Curve Input Value 2')
+    ovars << v
+
+    v = OpenStudio::Model::OutputVariable.new('Performance Curve Output Value', model)
+    v.setKeyValue(ctes.dischargingCurve.name.to_s)
+    v.setName('Discharge Curve Output Value')
+    ovars << v
+
+    # Create output variables for ice charge performance curve
+    v = OpenStudio::Model::OutputVariable.new('Performance Curve Input Variable 1 Value', model)
+    v.setKeyValue(ctes.chargingCurve.name.to_s)
+    v.setName('Charge Curve Input Value 1')
+    ovars << v
+
+    v = OpenStudio::Model::OutputVariable.new('Performance Curve Input Variable 2 Value', model)
+    v.setKeyValue(ctes.chargingCurve.name.to_s)
+    v.setName('Charge Curve Input Value 2')
+    ovars << v
+
+    v = OpenStudio::Model::OutputVariable.new('Performance Curve Output Value', model)
+    v.setKeyValue(ctes.chargingCurve.name.to_s)
+    v.setName('Charge Curve Output Value')
+    ovars << v
+
+    # Create output variables for chiller performance
+    v = OpenStudio::Model::OutputVariable.new('Performance Curve Output Value', model)
+    v.setKeyValue(ctes_chiller.coolingCapacityFunctionOfTemperature.name.to_s)
+    v.setName('Charge Curve Output Value')
+    ovars << v
+
+    v = OpenStudio::Model::OutputVariable.new('Performance Curve Output Value', model)
+    v.setKeyValue(ctes_chiller.electricInputToCoolingOutputRatioFunctionOfTemperature.name.to_s)
+    v.setName('Charge Curve Output Value')
+    ovars << v
+
+    v = OpenStudio::Model::OutputVariable.new('Performance Curve Output Value', model)
+    v.setKeyValue(ctes_chiller.electricInputToCoolingOutputRatioFunctionOfPLR.name.to_s)
+    v.setName('Charge Curve Output Value')
+    ovars << v
+
+    if chiller_limit < 1.0 # flag for EMS use, following EMS vars only exist if previous script ran
+
+      # Create output variable for chiller limited capacity (from EMS Output Variable)
+      v = OpenStudio::Model::OutputVariable.new(eout_chiller_limit.name.to_s, model)
+      v.setName("#{ctes_chiller.name} Limited Capacity")
+      v.setVariableName('Chiller Limited Capacity')
+      ovars << v
+
+      # Create output variable for chiller limit counter (from EMS Output Variable)
+      v = OpenStudio::Model::OutputVariable.new(eout_limit_counter.name.to_s, model)
+      v.setName("#{ctes_chiller.name} Limit Counter [Zone Timesteps]")
+      v.setVariableName('Chiller Limit Counter')
+      ovars << v
+
+    end
+
+    # Create output variable for Demand Response Flag (from EMS Output Variable)
+    if dr
+
+      v = OpenStudio::Model::OutputVariable.new(eout_drflag.name.to_s, model)
+      v.setName('Demand Response Event Flag')
+      v.setVariableName('Demand Response Flag')
+      ovars << v
+
+    end
+
+    # Create output variable for TES Capacity (from EMS Global Variable)
+    v = OpenStudio::Model::OutputVariable.new(eout_tes_cap.name.to_s, model)
+    v.setName("#{ctes.name} Ice Thermal Storage Capacity [GJ]")
+    v.setVariableName('Ice Thermal Storage Capacity')
+    ovars << v
+
+    # Create output variable for chiller nominal capacity (from EMS Output Variable)
+    v = OpenStudio::Model::OutputVariable.new(eout_chiller_cap.name.to_s, model)
+    v.setName("#{ctes_chiller.name} Nominal Capacity [W]")
+    v.setVariableName('Chiller Nominal Capacity')
+    ovars << v
+
+    # Set variable reporting frequency for newly created output variables
+    ovars.each do |var|
+      var.setReportingFrequency(report_freq)
+    end
+
+    # Register info about new output variables
+    runner.registerInfo("#{ovars.size} chiller and ice storage output variables were added to the model.")
+
+    # Create new energy/specific end use meters
+    omet_names = ['Pumps:Electricity',
+                  'Fans:Electricity',
+                  'Cooling:Electricity',
+                  'Electricity:HVAC',
+                  'Electricity:Plant',
+                  'Electricity:Building',
+                  'Electricity:Facility']
+
+    omet_names.each do |nm|
+      omet = OpenStudio::Model::OutputMeter.new(model)
+      omet.setName(nm)
+      omet.setReportingFrequency(report_freq)
+      omet.setMeterFileOnly(false)
+      omet.setCumulative(false)
+    end
+
+    # Register info about new output meters
+    runner.registerInfo("#{omet_names.size} output meters were added to the model.")
+
+    ## Report Final Condition of Model----------------------------------------------------------------------------------
+    total_storage = model.getThermalStorageIceDetaileds.size
+    runner.registerFinalCondition("The model finished with #{total_storage} ice energy storage device(s).")
+
+    true
+  end
+end
+
+# register the measure to be used by the application
+AddCentralIceStorage.new.registerWithApplication