openstudio-calibration 0.1.3 → 0.5.0

data/lib/measures/CalibrationReportsEnhanced/tests/CalibrationReportsEnhanced_Test.rb

@@ -1,734 +0,0 @@
-# *******************************************************************************
-# OpenStudio(R), Copyright (c) 2008-2020, Alliance for Sustainable Energy, LLC.
-# All rights reserved.
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#
-# (1) Redistributions of source code must retain the above copyright notice,
-# this list of conditions and the following disclaimer.
-#
-# (2) Redistributions in binary form must reproduce the above copyright notice,
-# this list of conditions and the following disclaimer in the documentation
-# and/or other materials provided with the distribution.
-#
-# (3) Neither the name of the copyright holder nor the names of any contributors
-# may be used to endorse or promote products derived from this software without
-# specific prior written permission from the respective party.
-#
-# (4) Other than as required in clauses (1) and (2), distributions in any form
-# of modifications or other derivative works may not use the "OpenStudio"
-# trademark, "OS", "os", or any other confusingly similar designation without
-# specific prior written permission from Alliance for Sustainable Energy, LLC.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND ANY CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER(S), ANY CONTRIBUTORS, THE
-# UNITED STATES GOVERNMENT, OR THE UNITED STATES DEPARTMENT OF ENERGY, NOR ANY OF
-# THEIR EMPLOYEES, BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
-# OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# *******************************************************************************
-
-require 'openstudio'
-
-require 'openstudio/ruleset/ShowRunnerOutput'
-
-require "#{File.dirname(__FILE__)}/../measure.rb"
-
-require 'fileutils'
-
-require 'minitest/autorun'
-
-class CalibrationReportsEnhanced_Test < Minitest::Test
-  def is_openstudio_2?
-    begin
-      workflow = OpenStudio::WorkflowJSON.new
-    rescue StandardError
-      return false
-    end
-    true
-  end
-
-  def model_in_path_default
-    "#{File.dirname(__FILE__)}/ExampleModel.osm"
-  end
-
-  def epw_path_default
-    # make sure we have a weather data location
-    epw = nil
-    epw = OpenStudio::Path.new("#{File.dirname(__FILE__)}/USA_CO_Golden-NREL.724666_TMY3.epw")
-    assert(File.exist?(epw.to_s))
-    epw.to_s
-  end
-
-  def run_dir(test_name)
-    # always generate test output in specially named 'output' directory so result files are not made part of the measure
-    "#{File.dirname(__FILE__)}/output/#{test_name}"
-  end
-
-  def model_out_path(test_name)
-    "#{run_dir(test_name)}/TestOutput.osm"
-  end
-
-  def workspace_path(test_name)
-    if is_openstudio_2?
-      "#{run_dir(test_name)}/run/in.idf"
-    else
-      "#{run_dir(test_name)}/ModelToIdf/in.idf"
-    end
-  end
-
-  def sql_path(test_name)
-    if is_openstudio_2?
-      "#{run_dir(test_name)}/run/eplusout.sql"
-    else
-      "#{run_dir(test_name)}/ModelToIdf/EnergyPlusPreProcess-0/EnergyPlus-0/eplusout.sql"
-    end
-  end
-
-  def report_path(test_name)
-    "#{run_dir(test_name)}/report.html"
-  end
-
-  # method for running the test simulation using OpenStudio 1.x API
-  def setup_test_1(test_name, epw_path)
-    co = OpenStudio::Runmanager::ConfigOptions.new(true)
-    co.findTools(false, true, false, true)
-
-    unless File.exist?(sql_path(test_name))
-      puts 'Running EnergyPlus'
-
-      wf = OpenStudio::Runmanager::Workflow.new('modeltoidf->energypluspreprocess->energyplus')
-      wf.add(co.getTools)
-      job = wf.create(OpenStudio::Path.new(run_dir(test_name)), OpenStudio::Path.new(model_out_path(test_name)), OpenStudio::Path.new(epw_path))
-
-      rm = OpenStudio::Runmanager::RunManager.new
-      rm.enqueue(job, true)
-      rm.waitForFinished
-    end
-  end
-
-  # method for running the test simulation using OpenStudio 2.x API
-  def setup_test_2(test_name, epw_path)
-    osw_path = File.join(run_dir(test_name), 'in.osw')
-    osw_path = File.absolute_path(osw_path)
-
-    workflow = OpenStudio::WorkflowJSON.new
-    workflow.setSeedFile(File.absolute_path(model_out_path(test_name)))
-    workflow.setWeatherFile(File.absolute_path(epw_path))
-    workflow.saveAs(osw_path)
-
-    cli_path = OpenStudio.getOpenStudioCLI
-    cmd = "\"#{cli_path}\" run -w \"#{osw_path}\""
-    puts cmd
-    system(cmd)
-  end
-
-  # create test files if they do not exist when the test first runs
-  def setup_test(test_name, idf_output_requests, model_in_path = model_in_path_default, epw_path = epw_path_default)
-    FileUtils.mkdir_p(run_dir(test_name)) unless File.exist?(run_dir(test_name))
-    assert(File.exist?(run_dir(test_name)))
-
-    FileUtils.rm(report_path(test_name)) if File.exist?(report_path(test_name))
-
-    assert(File.exist?(model_in_path))
-
-    if File.exist?(model_out_path(test_name))
-      FileUtils.rm(model_out_path(test_name))
-    end
-
-    # convert output requests to OSM for testing, OS App and PAT will add these to the E+ Idf
-    workspace = OpenStudio::Workspace.new('Draft'.to_StrictnessLevel, 'EnergyPlus'.to_IddFileType)
-    workspace.addObjects(idf_output_requests)
-    rt = OpenStudio::EnergyPlus::ReverseTranslator.new
-    request_model = rt.translateWorkspace(workspace)
-
-    translator = OpenStudio::OSVersion::VersionTranslator.new
-    model = translator.loadModel(model_in_path)
-    assert(!model.empty?)
-    model = model.get
-    model.addObjects(request_model.objects)
-    model.save(model_out_path(test_name), true)
-
-    if is_openstudio_2?
-      setup_test_2(test_name, epw_path)
-    else
-      setup_test_1(test_name, epw_path)
-    end
-  end
-
-  # calibration_reports
-  def test_CalibrationReportsEnhanced
-    test_name = 'calibration_reports'
-
-    # create an instance of the measure
-    measure = CalibrationReportsEnhanced.new
-
-    # create an instance of a runner
-    runner = OpenStudio::Measure::OSRunner.new(OpenStudio::WorkflowJSON.new)
-
-    # get arguments
-    arguments = measure.arguments
-    argument_map = OpenStudio::Measure.convertOSArgumentVectorToMap(arguments)
-
-    # create hash of argument values
-    args_hash = {}
-
-    # populate argument with specified hash value if specified
-    arguments.each do |arg|
-      temp_arg_var = arg.clone
-      assert(temp_arg_var.setValue(args_hash[arg.name])) if args_hash[arg.name]
-      argument_map[arg.name] = temp_arg_var
-    end
-
-    # get the energyplus output requests, this will be done automatically by OS App and PAT
-    idf_output_requests = measure.energyPlusOutputRequests(runner, argument_map)
-    assert_equal(0, idf_output_requests.size)
-
-    # mimic the process of running this measure in OS App or PAT. Optionally set custom model_in_path and custom epw_path.
-    epw_path = epw_path_default
-    setup_test(test_name, idf_output_requests)
-
-    assert(File.exist?(model_out_path(test_name)))
-    assert(File.exist?(sql_path(test_name)))
-    assert(File.exist?(epw_path))
-
-    # set up runner, this will happen automatically when measure is run in PAT or OpenStudio
-    runner.setLastOpenStudioModelPath(OpenStudio::Path.new(model_out_path(test_name)))
-    runner.setLastEnergyPlusWorkspacePath(OpenStudio::Path.new(workspace_path(test_name)))
-    runner.setLastEpwFilePath(epw_path)
-    runner.setLastEnergyPlusSqlFilePath(OpenStudio::Path.new(sql_path(test_name)))
-
-    # delete the output if it exists
-    FileUtils.rm(report_path(test_name)) if File.exist?(report_path(test_name))
-    assert(!File.exist?(report_path(test_name)))
-
-    # temporarily change directory to the run directory and run the measure
-    start_dir = Dir.pwd
-    begin
-      Dir.chdir(run_dir(test_name))
-
-      # run the measure
-      measure.run(runner, argument_map)
-      result = runner.result
-      show_output(result)
-      assert_equal('Success', result.value.valueName)
-      assert(result.warnings.empty?)
-    ensure
-      Dir.chdir(start_dir)
-    end
-
-    model = runner.lastOpenStudioModel
-    assert(!model.empty?)
-    model = model.get
-
-    sqlFile = runner.lastEnergyPlusSqlFile
-    assert(!sqlFile.empty?)
-    sqlFile = sqlFile.get
-
-    model.setSqlFile(sqlFile)
-
-    # must have a runPeriod
-    runPeriod = model.runPeriod
-    assert(!runPeriod.empty?)
-
-    # must have a calendarYear
-    yearDescription = model.yearDescription
-    assert(!yearDescription.empty?)
-    calendarYear = yearDescription.get.calendarYear
-    assert(!calendarYear.empty?)
-
-    # check for varying demand
-    model.getUtilityBills.each do |utilityBill|
-      next if utilityBill.peakDemandUnitConversionFactor.empty?
-      hasVaryingDemand = false
-      modelPeakDemand = 0.0
-      count = 0
-      utilityBill.billingPeriods.each do |billingPeriod|
-        peakDemand = billingPeriod.modelPeakDemand
-        next if peakDemand.empty?
-        temp = peakDemand.get
-        if count == 0
-          modelPeakDemand = temp
-        else
-          if modelPeakDemand != temp
-            hasVaryingDemand = true
-            break
-          end
-        end
-        count += 1
-      end
-      assert(hasVaryingDemand) if count > 1
-    end
-
-    # make sure the report file exists
-    assert(File.exist?(report_path(test_name)))
-  end
-
-  # calibration_reports_no_gas
-  def test_CalibrationReportsEnhanced_NoGas
-    test_name = 'calibration_reports_no_gas'
-
-    # load model, remove gas bills, save to new file
-    raw_model_path = "#{File.dirname(__FILE__)}/ExampleModel.osm"
-    vt = OpenStudio::OSVersion::VersionTranslator.new
-    model = vt.loadModel(raw_model_path)
-    assert(!model.empty?)
-    model = model.get
-    utilityBills = model.getUtilityBills
-    assert_equal(2, utilityBills.size)
-    utilityBills.each do |utilityBill|
-      utilityBill.remove if utilityBill.fuelType == 'Gas'.to_FuelType
-    end
-    utilityBills = model.getUtilityBills
-    assert_equal(1, utilityBills.size)
-    altered_model_path = OpenStudio::Path.new("#{run_dir(test_name)}/ExampleModelNoGasInput.osm")
-    FileUtils.mkdir_p run_dir(test_name)
-    model.save(altered_model_path, true)
-
-    # set model_in_path to new altered copy of model
-    model_in_path = altered_model_path
-
-    # create an instance of the measure
-    measure = CalibrationReportsEnhanced.new
-
-    # create an instance of a runner
-    runner = OpenStudio::Measure::OSRunner.new(OpenStudio::WorkflowJSON.new)
-
-    # get arguments
-    arguments = measure.arguments
-    argument_map = OpenStudio::Measure.convertOSArgumentVectorToMap(arguments)
-
-    # create hash of argument values
-    args_hash = {}
-
-    # populate argument with specified hash value if specified
-    arguments.each do |arg|
-      temp_arg_var = arg.clone
-      assert(temp_arg_var.setValue(args_hash[arg.name])) if args_hash[arg.name]
-      argument_map[arg.name] = temp_arg_var
-    end
-
-    # get the energyplus output requests, this will be done automatically by OS App and PAT
-    idf_output_requests = measure.energyPlusOutputRequests(runner, argument_map)
-    assert_equal(0, idf_output_requests.size)
-
-    # mimic the process of running this measure in OS App or PAT. Optionally set custom model_in_path and custom epw_path.
-    epw_path = epw_path_default
-    setup_test(test_name, idf_output_requests, model_in_path.to_s)
-
-    assert(File.exist?(model_out_path(test_name)))
-    assert(File.exist?(sql_path(test_name)))
-    assert(File.exist?(epw_path))
-
-    # set up runner, this will happen automatically when measure is run in PAT or OpenStudio
-    runner.setLastOpenStudioModelPath(OpenStudio::Path.new(model_out_path(test_name)))
-    runner.setLastEnergyPlusWorkspacePath(OpenStudio::Path.new(workspace_path(test_name)))
-    runner.setLastEpwFilePath(epw_path)
-    runner.setLastEnergyPlusSqlFilePath(OpenStudio::Path.new(sql_path(test_name)))
-
-    # delete the output if it exists
-    FileUtils.rm(report_path(test_name)) if File.exist?(report_path(test_name))
-    assert(!File.exist?(report_path(test_name)))
-
-    # temporarily change directory to the run directory and run the measure
-    start_dir = Dir.pwd
-    begin
-      Dir.chdir(run_dir(test_name))
-
-      # run the measure
-      measure.run(runner, argument_map)
-      result = runner.result
-      show_output(result)
-      assert_equal('Success', result.value.valueName)
-      assert(result.warnings.empty?)
-    ensure
-      Dir.chdir(start_dir)
-    end
-
-    model = runner.lastOpenStudioModel
-    assert(!model.empty?)
-    model = model.get
-
-    sqlFile = runner.lastEnergyPlusSqlFile
-    assert(!sqlFile.empty?)
-    sqlFile = sqlFile.get
-
-    model.setSqlFile(sqlFile)
-
-    # must have a runPeriod
-    runPeriod = model.runPeriod
-    assert(!runPeriod.empty?)
-
-    # must have a calendarYear
-    yearDescription = model.yearDescription
-    assert(!yearDescription.empty?)
-    calendarYear = yearDescription.get.calendarYear
-    assert(!calendarYear.empty?)
-
-    # check for varying demand
-    model.getUtilityBills.each do |utilityBill|
-      next if utilityBill.peakDemandUnitConversionFactor.empty?
-      hasVaryingDemand = false
-      modelPeakDemand = 0.0
-      count = 0
-      utilityBill.billingPeriods.each do |billingPeriod|
-        peakDemand = billingPeriod.modelPeakDemand
-        next if peakDemand.empty?
-        temp = peakDemand.get
-        if count == 0
-          modelPeakDemand = temp
-        else
-          if modelPeakDemand != temp
-            hasVaryingDemand = true
-            break
-          end
-        end
-        count += 1
-      end
-      assert(hasVaryingDemand) if count > 1
-    end
-
-    # make sure the report file exists
-    assert(File.exist?(report_path(test_name)))
-  end
-
-  # calibration_reports_no_demand
-  def test_CalibrationReportsEnhanced_NoDemand
-    test_name = 'calibration_reports_no_demand'
-
-    # load model, remove gas bills, save to new file
-    raw_model_path = "#{File.dirname(__FILE__)}/ExampleModel.osm"
-    vt = OpenStudio::OSVersion::VersionTranslator.new
-    model = vt.loadModel(raw_model_path)
-    assert(!model.empty?)
-    model = model.get
-    utilityBills = model.getUtilityBills
-    assert_equal(2, utilityBills.size)
-    utilityBills.each do |utilityBill|
-      next unless utilityBill.fuelType == 'Electricity'.to_FuelType
-      utilityBill.billingPeriods.each(&:resetPeakDemand)
-    end
-    utilityBills = model.getUtilityBills
-    assert_equal(2, utilityBills.size)
-    altered_model_path = OpenStudio::Path.new("#{run_dir(test_name)}/ExampleModelNoDemandInput.osm")
-    FileUtils.mkdir_p run_dir(test_name)
-    model.save(altered_model_path, true)
-
-    # set model_in_path to new altered copy of model
-    model_in_path = altered_model_path
-
-    # create an instance of the measure
-    measure = CalibrationReportsEnhanced.new
-
-    # create an instance of a runner
-    runner = OpenStudio::Measure::OSRunner.new(OpenStudio::WorkflowJSON.new)
-
-    # get arguments
-    arguments = measure.arguments
-    argument_map = OpenStudio::Measure.convertOSArgumentVectorToMap(arguments)
-
-    # create hash of argument values
-    args_hash = {}
-
-    # populate argument with specified hash value if specified
-    arguments.each do |arg|
-      temp_arg_var = arg.clone
-      assert(temp_arg_var.setValue(args_hash[arg.name])) if args_hash[arg.name]
-      argument_map[arg.name] = temp_arg_var
-    end
-
-    # get the energyplus output requests, this will be done automatically by OS App and PAT
-    idf_output_requests = measure.energyPlusOutputRequests(runner, argument_map)
-    assert_equal(0, idf_output_requests.size)
-
-    # mimic the process of running this measure in OS App or PAT. Optionally set custom model_in_path and custom epw_path.
-    epw_path = epw_path_default
-    setup_test(test_name, idf_output_requests, model_in_path.to_s)
-
-    assert(File.exist?(model_out_path(test_name)))
-    assert(File.exist?(sql_path(test_name)))
-    assert(File.exist?(epw_path))
-
-    # set up runner, this will happen automatically when measure is run in PAT or OpenStudio
-    runner.setLastOpenStudioModelPath(OpenStudio::Path.new(model_out_path(test_name)))
-    runner.setLastEnergyPlusWorkspacePath(OpenStudio::Path.new(workspace_path(test_name)))
-    runner.setLastEpwFilePath(epw_path)
-    runner.setLastEnergyPlusSqlFilePath(OpenStudio::Path.new(sql_path(test_name)))
-
-    # delete the output if it exists
-    FileUtils.rm(report_path(test_name)) if File.exist?(report_path(test_name))
-    assert(!File.exist?(report_path(test_name)))
-
-    # temporarily change directory to the run directory and run the measure
-    start_dir = Dir.pwd
-    begin
-      Dir.chdir(run_dir(test_name))
-
-      # run the measure
-      measure.run(runner, argument_map)
-      result = runner.result
-      show_output(result)
-      assert_equal('Success', result.value.valueName)
-      assert(result.warnings.empty?)
-    ensure
-      Dir.chdir(start_dir)
-    end
-
-    model = runner.lastOpenStudioModel
-    assert(!model.empty?)
-    model = model.get
-
-    sqlFile = runner.lastEnergyPlusSqlFile
-    assert(!sqlFile.empty?)
-    sqlFile = sqlFile.get
-
-    model.setSqlFile(sqlFile)
-
-    # must have a runPeriod
-    runPeriod = model.runPeriod
-    assert(!runPeriod.empty?)
-
-    # must have a calendarYear
-    yearDescription = model.yearDescription
-    assert(!yearDescription.empty?)
-    calendarYear = yearDescription.get.calendarYear
-    assert(!calendarYear.empty?)
-
-    # check for no demand
-    model.getUtilityBills.each do |utilityBill|
-      utilityBill.billingPeriods.each do |billingPeriod|
-        assert(billingPeriod.peakDemand.empty?)
-      end
-    end
-
-    # make sure the report file exists
-    assert(File.exist?(report_path(test_name)))
-  end
-
-  # calibration_reports_with_two_gas_bills
-  def test_CalibrationReportsEnhanced_TwoGas
-    test_name = 'calibration_reports_two_gas'
-
-    # load model, remove gas bills, save to new file
-    raw_model_path = "#{File.dirname(__FILE__)}/ExampleModel.osm"
-    vt = OpenStudio::OSVersion::VersionTranslator.new
-    model = vt.loadModel(raw_model_path)
-    assert(!model.empty?)
-    model = model.get
-    utilityBills = model.getUtilityBills
-    assert_equal(2, utilityBills.size)
-    utilityBills.each do |utilityBill|
-      utilityBill.clone(model) if utilityBill.fuelType == 'Gas'.to_FuelType
-    end
-    utilityBills = model.getUtilityBills
-    assert_equal(3, utilityBills.size)
-    altered_model_path = OpenStudio::Path.new("#{run_dir(test_name)}/ExampleModelTwoGasInput.osm")
-    FileUtils.mkdir_p run_dir(test_name)
-    model.save(altered_model_path, true)
-
-    # set model_in_path to new altered copy of model
-    model_in_path = altered_model_path
-
-    # create an instance of the measure
-    measure = CalibrationReportsEnhanced.new
-
-    # create an instance of a runner
-    runner = OpenStudio::Measure::OSRunner.new(OpenStudio::WorkflowJSON.new)
-
-    # get arguments
-    arguments = measure.arguments
-    argument_map = OpenStudio::Measure.convertOSArgumentVectorToMap(arguments)
-
-    # create hash of argument values
-    args_hash = {}
-
-    # populate argument with specified hash value if specified
-    arguments.each do |arg|
-      temp_arg_var = arg.clone
-      assert(temp_arg_var.setValue(args_hash[arg.name])) if args_hash[arg.name]
-      argument_map[arg.name] = temp_arg_var
-    end
-
-    # get the energyplus output requests, this will be done automatically by OS App and PAT
-    idf_output_requests = measure.energyPlusOutputRequests(runner, argument_map)
-    assert_equal(0, idf_output_requests.size)
-
-    # mimic the process of running this measure in OS App or PAT. Optionally set custom model_in_path and custom epw_path.
-    epw_path = epw_path_default
-    setup_test(test_name, idf_output_requests, model_in_path.to_s)
-
-    assert(File.exist?(model_out_path(test_name)))
-    assert(File.exist?(sql_path(test_name)))
-    assert(File.exist?(epw_path))
-
-    # set up runner, this will happen automatically when measure is run in PAT or OpenStudio
-    runner.setLastOpenStudioModelPath(OpenStudio::Path.new(model_out_path(test_name)))
-    runner.setLastEnergyPlusWorkspacePath(OpenStudio::Path.new(workspace_path(test_name)))
-    runner.setLastEpwFilePath(epw_path)
-    runner.setLastEnergyPlusSqlFilePath(OpenStudio::Path.new(sql_path(test_name)))
-
-    # delete the output if it exists
-    FileUtils.rm(report_path(test_name)) if File.exist?(report_path(test_name))
-    assert(!File.exist?(report_path(test_name)))
-
-    # temporarily change directory to the run directory and run the measure
-    start_dir = Dir.pwd
-    begin
-      Dir.chdir(run_dir(test_name))
-
-      # run the measure
-      measure.run(runner, argument_map)
-      result = runner.result
-      show_output(result)
-      assert_equal('Success', result.value.valueName)
-      assert(result.warnings.size == 1)
-    ensure
-      Dir.chdir(start_dir)
-    end
-
-    model = runner.lastOpenStudioModel
-    assert(!model.empty?)
-    model = model.get
-
-    sqlFile = runner.lastEnergyPlusSqlFile
-    assert(!sqlFile.empty?)
-    sqlFile = sqlFile.get
-
-    model.setSqlFile(sqlFile)
-
-    # must have a runPeriod
-    runPeriod = model.runPeriod
-    assert(!runPeriod.empty?)
-
-    # must have a calendarYear
-    yearDescription = model.yearDescription
-    assert(!yearDescription.empty?)
-    calendarYear = yearDescription.get.calendarYear
-    assert(!calendarYear.empty?)
-
-    # make sure the report file exists
-    assert(File.exist?(report_path(test_name)))
-  end
-
-  # calibration_reports
-  def test_CalibrationFuelOil2
-    skip 'Remove once CI is using 2.7.0 or later'
-
-    test_name = 'calibration_fuel_oil2'
-    model_in_path = "#{File.dirname(__FILE__)}/ExampleModel_FuelOil.osm"
-
-    # create an instance of the measure
-    measure = CalibrationReportsEnhanced.new
-
-    # create an instance of a runner
-    runner = OpenStudio::Measure::OSRunner.new(OpenStudio::WorkflowJSON.new)
-
-    # get arguments
-    arguments = measure.arguments
-    argument_map = OpenStudio::Measure.convertOSArgumentVectorToMap(arguments)
-
-    # create hash of argument values
-    args_hash = {}
-
-    # populate argument with specified hash value if specified
-    arguments.each do |arg|
-      temp_arg_var = arg.clone
-      assert(temp_arg_var.setValue(args_hash[arg.name])) if args_hash[arg.name]
-      argument_map[arg.name] = temp_arg_var
-    end
-
-    # get the energyplus output requests, this will be done automatically by OS App and PAT
-    idf_output_requests = measure.energyPlusOutputRequests(runner, argument_map)
-    assert_equal(0, idf_output_requests.size)
-
-    # mimic the process of running this measure in OS App or PAT. Optionally set custom model_in_path and custom epw_path.
-    epw_path = epw_path_default
-    setup_test(test_name, idf_output_requests, model_in_path)
-
-    assert(File.exist?(model_out_path(test_name)))
-    assert(File.exist?(sql_path(test_name)))
-    assert(File.exist?(epw_path))
-
-    # set up runner, this will happen automatically when measure is run in PAT or OpenStudio
-    runner.setLastOpenStudioModelPath(OpenStudio::Path.new(model_out_path(test_name)))
-    runner.setLastEnergyPlusWorkspacePath(OpenStudio::Path.new(workspace_path(test_name)))
-    runner.setLastEpwFilePath(epw_path)
-    runner.setLastEnergyPlusSqlFilePath(OpenStudio::Path.new(sql_path(test_name)))
-
-    # delete the output if it exists
-    FileUtils.rm(report_path(test_name)) if File.exist?(report_path(test_name))
-    assert(!File.exist?(report_path(test_name)))
-
-    # temporarily change directory to the run directory and run the measure
-    start_dir = Dir.pwd
-    begin
-      Dir.chdir(run_dir(test_name))
-
-      # run the measure
-      measure.run(runner, argument_map)
-      result = runner.result
-      show_output(result)
-      assert_equal('Success', result.value.valueName)
-      # assert(result.warnings.size == 0)
-    ensure
-      Dir.chdir(start_dir)
-    end
-
-    model = runner.lastOpenStudioModel
-    assert(!model.empty?)
-    model = model.get
-
-    sqlFile = runner.lastEnergyPlusSqlFile
-    assert(!sqlFile.empty?)
-    sqlFile = sqlFile.get
-
-    model.setSqlFile(sqlFile)
-
-    # must have a runPeriod
-    runPeriod = model.runPeriod
-    assert(!runPeriod.empty?)
-
-    # must have a calendarYear
-    yearDescription = model.yearDescription
-    assert(!yearDescription.empty?)
-    calendarYear = yearDescription.get.calendarYear
-    assert(!calendarYear.empty?)
-
-    # check for varying demand
-    assert_equal(3, model.getUtilityBills.size)
-    model.getUtilityBills.each do |utilityBill|
-      assert(!utilityBill.billingPeriods.empty?)
-      utilityBill.billingPeriods.each do |billingPeriod|
-        assert(!billingPeriod.modelConsumption.empty?)
-      end
-
-      next if utilityBill.peakDemandUnitConversionFactor.empty?
-      hasVaryingDemand = false
-      modelPeakDemand = 0.0
-      count = 0
-      utilityBill.billingPeriods.each do |billingPeriod|
-        peakDemand = billingPeriod.modelPeakDemand
-        next if peakDemand.empty?
-        temp = peakDemand.get
-        if count == 0
-          modelPeakDemand = temp
-        else
-          if modelPeakDemand != temp
-            hasVaryingDemand = true
-            break
-          end
-        end
-        count += 1
-      end
-      assert(hasVaryingDemand) if count > 1
-    end
-
-    # make sure the report file exists
-    assert(File.exist?(report_path(test_name)))
-  end
-end