openstudio-analysis 0.2.2 → 0.2.3

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-small-list-of-variables.13.xml

@@ -1,30 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<testsuite name="OpenStudio::Analysis::Translator::Excel small list of variables" tests="3" time="0.368527" failures="0" errors="0" skipped="0">
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a model" time="0.00022">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a weather file" time="0.000122">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should write a json" time="0.107715">
-  </testcase>
-  <system-out>
-Parsing measure Reduce Lighting Loads by Percentage
-Parsing measure ReduceSpaceInfiltrationByPercentage
-Parsing measure Adjust Thermostat Setpoints by Degrees
-Parsing measure Set R-value of Insulation for Exterior Walls to a Specific Value
-Parsing measure Set R-value of Insulation for Roofs to a Specific Value
-Parsing measure Reduce Ventilation By Percentage
-true
-Analysis name is Test Run 1
-  Adding measure item 'reduce_lighting_loads_by_percentage'
-  Adding measure item 'reducespaceinfiltrationbypercentage'
-  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
-  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
-  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
-  Adding measure item 'reduce_ventilation_by_percentage'
-  Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/partial_weather.epw
-Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/small_seed.osm
-Adding in other files []
-  </system-out>
-  <system-err>
-  </system-err>
-</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-small-list-of-variables.14.xml

@@ -1,30 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<testsuite name="OpenStudio::Analysis::Translator::Excel small list of variables" tests="3" time="0.349229" failures="0" errors="0" skipped="0">
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a model" time="0.000221">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a weather file" time="0.000116">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should write a json" time="0.112874">
-  </testcase>
-  <system-out>
-Parsing measure Reduce Lighting Loads by Percentage
-Parsing measure ReduceSpaceInfiltrationByPercentage
-Parsing measure Adjust Thermostat Setpoints by Degrees
-Parsing measure Set R-value of Insulation for Exterior Walls to a Specific Value
-Parsing measure Set R-value of Insulation for Roofs to a Specific Value
-Parsing measure Reduce Ventilation By Percentage
-true
-Analysis name is Test Run 1
-  Adding measure item 'reduce_lighting_loads_by_percentage'
-  Adding measure item 'reducespaceinfiltrationbypercentage'
-  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
-  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
-  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
-  Adding measure item 'reduce_ventilation_by_percentage'
-  Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/partial_weather.epw
-Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/small_seed.osm
-Adding in other files []
-  </system-out>
-  <system-err>
-  </system-err>
-</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-small-list-of-variables.15.xml

@@ -1,30 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<testsuite name="OpenStudio::Analysis::Translator::Excel small list of variables" tests="3" time="0.354736" failures="0" errors="0" skipped="0">
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a model" time="0.000223">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a weather file" time="0.000114">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should write a json" time="0.111995">
-  </testcase>
-  <system-out>
-Parsing measure Reduce Lighting Loads by Percentage
-Parsing measure ReduceSpaceInfiltrationByPercentage
-Parsing measure Adjust Thermostat Setpoints by Degrees
-Parsing measure Set R-value of Insulation for Exterior Walls to a Specific Value
-Parsing measure Set R-value of Insulation for Roofs to a Specific Value
-Parsing measure Reduce Ventilation By Percentage
-true
-Analysis name is Test Run 1
-  Adding measure item 'reduce_lighting_loads_by_percentage'
-  Adding measure item 'reducespaceinfiltrationbypercentage'
-  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
-  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
-  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
-  Adding measure item 'reduce_ventilation_by_percentage'
-  Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/partial_weather.epw
-Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/small_seed.osm
-Adding in other files []
-  </system-out>
-  <system-err>
-  </system-err>
-</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-small-list-of-variables.16.xml

@@ -1,30 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<testsuite name="OpenStudio::Analysis::Translator::Excel small list of variables" tests="3" time="0.371548" failures="0" errors="0" skipped="0">
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a model" time="0.000226">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a weather file" time="0.000115">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should write a json" time="0.113252">
-  </testcase>
-  <system-out>
-Parsing measure Reduce Lighting Loads by Percentage
-Parsing measure ReduceSpaceInfiltrationByPercentage
-Parsing measure Adjust Thermostat Setpoints by Degrees
-Parsing measure Set R-value of Insulation for Exterior Walls to a Specific Value
-Parsing measure Set R-value of Insulation for Roofs to a Specific Value
-Parsing measure Reduce Ventilation By Percentage
-true
-Analysis name is Test Run 1
-  Adding measure item 'reduce_lighting_loads_by_percentage'
-  Adding measure item 'reducespaceinfiltrationbypercentage'
-  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
-  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
-  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
-  Adding measure item 'reduce_ventilation_by_percentage'
-  Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/partial_weather.epw
-Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/small_seed.osm
-Adding in other files []
-  </system-out>
-  <system-err>
-  </system-err>
-</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-small-list-of-variables.17.xml

@@ -1,30 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<testsuite name="OpenStudio::Analysis::Translator::Excel small list of variables" tests="3" time="0.354808" failures="0" errors="0" skipped="0">
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a model" time="0.000224">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a weather file" time="0.000112">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should write a json" time="0.10263">
-  </testcase>
-  <system-out>
-Parsing measure Reduce Lighting Loads by Percentage
-Parsing measure ReduceSpaceInfiltrationByPercentage
-Parsing measure Adjust Thermostat Setpoints by Degrees
-Parsing measure Set R-value of Insulation for Exterior Walls to a Specific Value
-Parsing measure Set R-value of Insulation for Roofs to a Specific Value
-Parsing measure Reduce Ventilation By Percentage
-true
-Analysis name is Test Run 1
-  Adding measure item 'reduce_lighting_loads_by_percentage'
-  Adding measure item 'reducespaceinfiltrationbypercentage'
-  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
-  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
-  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
-  Adding measure item 'reduce_ventilation_by_percentage'
-  Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/partial_weather.epw
-Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/small_seed.osm
-Adding in other files []
-  </system-out>
-  <system-err>
-  </system-err>
-</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-small-list-of-variables.18.xml

@@ -1,30 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<testsuite name="OpenStudio::Analysis::Translator::Excel small list of variables" tests="3" time="0.345542" failures="0" errors="0" skipped="0">
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a model" time="0.000238">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a weather file" time="0.000142">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should write a json" time="0.109961">
-  </testcase>
-  <system-out>
-Parsing measure Reduce Lighting Loads by Percentage
-Parsing measure ReduceSpaceInfiltrationByPercentage
-Parsing measure Adjust Thermostat Setpoints by Degrees
-Parsing measure Set R-value of Insulation for Exterior Walls to a Specific Value
-Parsing measure Set R-value of Insulation for Roofs to a Specific Value
-Parsing measure Reduce Ventilation By Percentage
-true
-Analysis name is Test Run 1
-  Adding measure item 'reduce_lighting_loads_by_percentage'
-  Adding measure item 'reducespaceinfiltrationbypercentage'
-  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
-  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
-  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
-  Adding measure item 'reduce_ventilation_by_percentage'
-  Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/partial_weather.epw
-Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/small_seed.osm
-Adding in other files []
-  </system-out>
-  <system-err>
-  </system-err>
-</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-small-list-of-variables.19.xml

@@ -1,30 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<testsuite name="OpenStudio::Analysis::Translator::Excel small list of variables" tests="3" time="0.34552" failures="0" errors="0" skipped="0">
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a model" time="0.000215">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a weather file" time="0.00013">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should write a json" time="0.107114">
-  </testcase>
-  <system-out>
-Parsing measure Reduce Lighting Loads by Percentage
-Parsing measure ReduceSpaceInfiltrationByPercentage
-Parsing measure Adjust Thermostat Setpoints by Degrees
-Parsing measure Set R-value of Insulation for Exterior Walls to a Specific Value
-Parsing measure Set R-value of Insulation for Roofs to a Specific Value
-Parsing measure Reduce Ventilation By Percentage
-true
-Analysis name is Test Run 1
-  Adding measure item 'reduce_lighting_loads_by_percentage'
-  Adding measure item 'reducespaceinfiltrationbypercentage'
-  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
-  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
-  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
-  Adding measure item 'reduce_ventilation_by_percentage'
-  Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/partial_weather.epw
-Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/small_seed.osm
-Adding in other files []
-  </system-out>
-  <system-err>
-  </system-err>
-</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-small-list-of-variables.2.xml

@@ -1,35 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<testsuite name="OpenStudio::Analysis::Translator::Excel small list of variables" tests="3" time="0.375809" failures="0" errors="1" skipped="0">
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a model" time="0.00022">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a weather file" time="0.000114">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should write a json" time="0.116046">
-    <failure type="JSON::ParserError" message="757: unexpected token at 'spec/files/export/analysis/small_seed.json'">
-757: unexpected token at 'spec/files/export/analysis/small_seed.json' (JSON::ParserError)
-JSON::ParserError:
-757: unexpected token at 'spec/files/export/analysis/small_seed.json'
-     ./spec/openstudio/analysis/translator/excel_spec.rb:89:in `block (3 levels) in &lt;top (required)&gt;'    </failure>
-  </testcase>
-  <system-out>
-Parsing measure Reduce Lighting Loads by Percentage
-Parsing measure ReduceSpaceInfiltrationByPercentage
-Parsing measure Adjust Thermostat Setpoints by Degrees
-Parsing measure Set R-value of Insulation for Exterior Walls to a Specific Value
-Parsing measure Set R-value of Insulation for Roofs to a Specific Value
-Parsing measure Reduce Ventilation By Percentage
-true
-Analysis name is Test Run 1
-  Adding measure item 'reduce_lighting_loads_by_percentage'
-  Adding measure item 'reducespaceinfiltrationbypercentage'
-  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
-  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
-  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
-  Adding measure item 'reduce_ventilation_by_percentage'
-  Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/partial_weather.epw
-Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/small_seed.osm
-Adding in other files []
-  </system-out>
-  <system-err>
-  </system-err>
-</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-small-list-of-variables.20.xml

@@ -1,30 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<testsuite name="OpenStudio::Analysis::Translator::Excel small list of variables" tests="3" time="0.353706" failures="0" errors="0" skipped="0">
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a model" time="0.000228">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a weather file" time="0.000115">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should write a json" time="0.113192">
-  </testcase>
-  <system-out>
-Parsing measure Reduce Lighting Loads by Percentage
-Parsing measure ReduceSpaceInfiltrationByPercentage
-Parsing measure Adjust Thermostat Setpoints by Degrees
-Parsing measure Set R-value of Insulation for Exterior Walls to a Specific Value
-Parsing measure Set R-value of Insulation for Roofs to a Specific Value
-Parsing measure Reduce Ventilation By Percentage
-true
-Analysis name is Test Run 1
-  Adding measure item 'reduce_lighting_loads_by_percentage'
-  Adding measure item 'reducespaceinfiltrationbypercentage'
-  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
-  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
-  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
-  Adding measure item 'reduce_ventilation_by_percentage'
-  Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/partial_weather.epw
-Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/small_seed.osm
-Adding in other files []
-  </system-out>
-  <system-err>
-  </system-err>
-</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-small-list-of-variables.21.xml

@@ -1,30 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<testsuite name="OpenStudio::Analysis::Translator::Excel small list of variables" tests="3" time="0.354976" failures="0" errors="0" skipped="0">
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a model" time="0.000219">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a weather file" time="0.00013">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should write a json" time="0.108065">
-  </testcase>
-  <system-out>
-Parsing measure Reduce Lighting Loads by Percentage
-Parsing measure ReduceSpaceInfiltrationByPercentage
-Parsing measure Adjust Thermostat Setpoints by Degrees
-Parsing measure Set R-value of Insulation for Exterior Walls to a Specific Value
-Parsing measure Set R-value of Insulation for Roofs to a Specific Value
-Parsing measure Reduce Ventilation By Percentage
-true
-Analysis name is Test Run 1
-  Adding measure item 'reduce_lighting_loads_by_percentage'
-  Adding measure item 'reducespaceinfiltrationbypercentage'
-  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
-  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
-  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
-  Adding measure item 'reduce_ventilation_by_percentage'
-  Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/partial_weather.epw
-Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/small_seed.osm
-Adding in other files []
-  </system-out>
-  <system-err>
-  </system-err>
-</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-small-list-of-variables.22.xml

@@ -1,30 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<testsuite name="OpenStudio::Analysis::Translator::Excel small list of variables" tests="3" time="0.355025" failures="0" errors="0" skipped="0">
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a model" time="0.000219">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a weather file" time="0.000139">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should write a json" time="0.121629">
-  </testcase>
-  <system-out>
-Parsing measure Reduce Lighting Loads by Percentage
-Parsing measure ReduceSpaceInfiltrationByPercentage
-Parsing measure Adjust Thermostat Setpoints by Degrees
-Parsing measure Set R-value of Insulation for Exterior Walls to a Specific Value
-Parsing measure Set R-value of Insulation for Roofs to a Specific Value
-Parsing measure Reduce Ventilation By Percentage
-true
-Analysis name is Test Run 1
-  Adding measure item 'reduce_lighting_loads_by_percentage'
-  Adding measure item 'reducespaceinfiltrationbypercentage'
-  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
-  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
-  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
-  Adding measure item 'reduce_ventilation_by_percentage'
-  Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/partial_weather.epw
-Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/small_seed.osm
-Adding in other files []
-  </system-out>
-  <system-err>
-  </system-err>
-</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-small-list-of-variables.23.xml

@@ -1,30 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<testsuite name="OpenStudio::Analysis::Translator::Excel small list of variables" tests="3" time="0.387848" failures="0" errors="0" skipped="0">
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a model" time="0.000223">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a weather file" time="0.000133">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should write a json" time="0.15166">
-  </testcase>
-  <system-out>
-Parsing measure Reduce Lighting Loads by Percentage
-Parsing measure ReduceSpaceInfiltrationByPercentage
-Parsing measure Adjust Thermostat Setpoints by Degrees
-Parsing measure Set R-value of Insulation for Exterior Walls to a Specific Value
-Parsing measure Set R-value of Insulation for Roofs to a Specific Value
-Parsing measure Reduce Ventilation By Percentage
-true
-Analysis name is Test Run 1
-  Adding measure item 'reduce_lighting_loads_by_percentage'
-  Adding measure item 'reducespaceinfiltrationbypercentage'
-  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
-  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
-  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
-  Adding measure item 'reduce_ventilation_by_percentage'
-  Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/partial_weather.epw
-Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/small_seed.osm
-Adding in other files []
-  </system-out>
-  <system-err>
-  </system-err>
-</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-small-list-of-variables.24.xml

@@ -1,30 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<testsuite name="OpenStudio::Analysis::Translator::Excel small list of variables" tests="3" time="0.350303" failures="0" errors="0" skipped="0">
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a model" time="0.000249">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a weather file" time="0.00013">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should write a json" time="0.110407">
-  </testcase>
-  <system-out>
-Parsing measure Reduce Lighting Loads by Percentage
-Parsing measure ReduceSpaceInfiltrationByPercentage
-Parsing measure Adjust Thermostat Setpoints by Degrees
-Parsing measure Set R-value of Insulation for Exterior Walls to a Specific Value
-Parsing measure Set R-value of Insulation for Roofs to a Specific Value
-Parsing measure Reduce Ventilation By Percentage
-true
-Analysis name is Test Run 1
-  Adding measure item 'reduce_lighting_loads_by_percentage'
-  Adding measure item 'reducespaceinfiltrationbypercentage'
-  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
-  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
-  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
-  Adding measure item 'reduce_ventilation_by_percentage'
-  Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/partial_weather.epw
-Adding /Users/nlong/Working/OpenStudio-analysis-gem/spec/files/small_seed.osm
-Adding in other files []
-  </system-out>
-  <system-err>
-  </system-err>
-</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-small-list-of-variables.25.xml

@@ -1,21 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<testsuite name="OpenStudio::Analysis::Translator::Excel small list of variables" tests="3" time="0.396259" failures="0" errors="0" skipped="0">
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a model" time="0.000239">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a weather file" time="0.000131">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should write a json" time="0.134066">
-  </testcase>
-  <system-out>
-true
-Analysis name is Example Analysis
-  Adding measure item 'reduce_lighting_loads_by_percentage'
-  Adding measure item 'reducespaceinfiltrationbypercentage'
-  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
-  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
-  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
-  Adding measure item 'reduce_ventilation_by_percentage'
-  </system-out>
-  <system-err>
-  </system-err>
-</testsuite>

data/spec/reports/SPEC-OpenStudio-Analysis-Translator-Excel-small-list-of-variables.26.xml

@@ -1,21 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<testsuite name="OpenStudio::Analysis::Translator::Excel small list of variables" tests="3" time="0.378908" failures="0" errors="0" skipped="0">
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a model" time="0.000231">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should have a weather file" time="0.000127">
-  </testcase>
-  <testcase name="OpenStudio::Analysis::Translator::Excel small list of variables should write a json" time="0.128233">
-  </testcase>
-  <system-out>
-true
-Analysis name is Example Analysis
-  Adding measure item 'reduce_lighting_loads_by_percentage'
-  Adding measure item 'reducespaceinfiltrationbypercentage'
-  Adding measure item 'adjust_thermostat_setpoints_by_degrees'
-  Adding measure item 'set_r_value_of_insulation_for_exterior_walls_to_a_specific_value'
-  Adding measure item 'set_r_value_of_insulation_for_roofs_to_a_specific_value'
-  Adding measure item 'reduce_ventilation_by_percentage'
-  </system-out>
-  <system-err>
-  </system-err>
-</testsuite>