opensips-mi 0.0.11 → 1.0.0

data/spec/response_spec.rb

@@ -1,117 +0,0 @@
-include Opensips::MI
-
-describe Response do
-  it "must raise if parameter is not Array" do
-    expect {Response.new "foo"}.to raise_error InvalidResponseData
-  end
-
-  it "must raise if response data id empty array" do
-    expect {Response.new Array[]}.to raise_error EmptyResponseData
-  end
-
-  it "must raise if invalid response data" do
-    expect {Response.new(["invalid param","343",222])}.
-      to raise_error InvalidResponseData
-  end
-
-  it "must parse successfull response" do
-    resp = Response.new ["200 it is OK", "data", ""]
-    expect(resp.success).to be_truthy
-    expect(resp.code).to be(200)
-    expect(resp.message).to match("it is OK")
-  end
-
-  it "must parse unsuccessfull response" do
-    resp = Response.new ["500 command 'unknown' not available"]
-    expect(resp.success).to be_falsey
-    expect(resp.code).to be(500)
-    expect(resp.message).to match("command 'unknown' not available")
-  end
-
-  it "parse ul dump response" do
-    res = Response.new(fixture('ul_dump'))
-    ul = res.ul_dump
-    expect(ul.result["7962"]).not_to be_nil
-    expect(ul.result["7962"][0][:callid]).to match("5e7a1e47da91c41c")
-  end
-
-  it "process uptime response" do
-    res = Response.new [
-      "200 OK",
-      "Now:: Fri Apr 12 22:04:27 2013",
-      "Up since:: Thu Apr 11 21:43:01 2013",
-      "Up time:: 87686 [sec]",
-      ""
-    ]
-    resp = res.uptime
-    expect(resp.result.uptime).to be(87686)
-    expect(resp.result.since.thursday?).to be_truthy
-    expect(resp.result.since.hour).to be(21)
-    expect(resp.result.since.mon).to be(4)
-  end
-
-  it "must fetch cache value" do
-    res = Response.new [
-      "200 OK",
-      "userdid = [18005552211]",
-      ""
-    ]
-    resp= res.cache_fetch
-    expect(resp.result.userdid).to match("18005552211")
-  end
-
-  it "must return userloc contacts" do
-    contacts = ["200 OK",
-      "Contact:: <sip:7747@10.132.113.198>;q=;expires=100;flags=0x0;cflags=0x0;socket=<udp:10.130.8.21:5060>;methods=0x1F7F;user_agent=<PolycomSoundStationIP-SSIP_6000-UA/3.3.5.0247_0004f2f18103>",
-      "Contact:: <sip:7747@10.130.8.100;line=628f4ffdfa7316e>;q=;expires=3593;flags=0x0;cflags=0x0;socket=<udp:10.130.8.21:5060>;methods=0xFFFFFFFF;user_agent=<Linphone/3.5.2 (eXosip2/3.6.0)>",
-      ""]
-    response = Response.new contacts
-    res = response.ul_show_contact
-    expect(res.size).to be(2)
-    expect(res.first[:socket]).to match("<udp:10.130.8.21:5060>")
-    expect(res.last[:expires]).to match("3593")
-  end
-
-  it "must process dialogs list" do
-    response = Response.new fixture('dlg_list')
-    res = response.dlg_list.result
-    expect(res.size).to be(1)
-    expect(res["3212:2099935485"][:callid]).to match("1854719653")
-  end
-
-  it "must process dr_gw_status response in hash" do
-    gw_list = [
-      "200 OK",
-      "ID:: gw1 IP=212.182.133.202:5060 Enabled=no ",
-      "ID:: gw2 IP=213.15.222.97:5060 Enabled=yes",
-      "ID:: gw3 IP=200.182.132.201:5060 Enabled=yes",
-      "ID:: gw4 IP=200.182.135.204:5060 Enabled=yes",
-      "ID:: pstn1 IP=199.18.14.101:5060 Enabled=yes",
-      "ID:: pstn2 IP=199.18.14.102:5060 Enabled=no",
-      "ID:: pstn3 IP=199.18.12.103:5060 Enabled=yes",
-      "ID:: pstn4 IP=199.18.12.104:5060 Enabled=yes",
-      ""
-    ]
-    response = Response.new gw_list
-    drgws = response.dr_gw_status
-    expect(drgws.result.size).to be(8)
-    expect(drgws.result["pstn4"][:ipaddr]).to match("199.18.12.104")
-    expect(drgws.result["pstn3"][:port]).to match("5060")
-    expect(drgws.result["gw1"][:enabled]).to be_falsey
-    expect(drgws.result["gw4"][:enabled]).to be_truthy
-  end
-
-  it "must return raw data if dr_gw_status is run with arguments" do
-    gw = [ "200 OK", "Enabled:: yes", "" ]
-    response = Response.new gw
-    drgws = response.dr_gw_status
-    expect(drgws.enabled).to be_truthy
-  end
-
-  it "result must be empty if command send to dr_gw_status" do 
-    response = Response.new [ "200 OK", "" ]
-    drgws = response.dr_gw_status
-    expect(drgws.result).to be_nil
-    expect(drgws.success).to be_truthy
-  end
-end

data/spec/spec_helper.rb

@@ -1,112 +0,0 @@
-# This file was generated by the `rspec --init` command. Conventionally, all
-# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
-# The generated `.rspec` file contains `--require spec_helper` which will cause
-# this file to always be loaded, without a need to explicitly require it in any
-# files.
-#
-# Given that it is always loaded, you are encouraged to keep this file as
-# light-weight as possible. Requiring heavyweight dependencies from this file
-# will add to the boot time of your test suite on EVERY test run, even for an
-# individual file that may not need all of that loaded. Instead, consider making
-# a separate helper file that requires the additional dependencies and performs
-# the additional setup, and require it from the spec files that actually need
-# it.
-#
-
-require 'simplecov'
-SimpleCov.start
-
-require 'opensips/mi'
-# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
-RSpec.configure do |config|
-  # rspec-expectations config goes here. You can use an alternate
-  # assertion/expectation library such as wrong or the stdlib/minitest
-  # assertions if you prefer.
-  config.expect_with :rspec do |expectations|
-    # This option will default to `true` in RSpec 4. It makes the `description`
-    # and `failure_message` of custom matchers include text for helper methods
-    # defined using `chain`, e.g.:
-    #     be_bigger_than(2).and_smaller_than(4).description
-    #     # => "be bigger than 2 and smaller than 4"
-    # ...rather than:
-    #     # => "be bigger than 2"
-    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
-  end
-
-  # rspec-mocks config goes here. You can use an alternate test double
-  # library (such as bogus or mocha) by changing the `mock_with` option here.
-  config.mock_with :rspec do |mocks|
-    # Prevents you from mocking or stubbing a method that does not exist on
-    # a real object. This is generally recommended, and will default to
-    # `true` in RSpec 4.
-    mocks.verify_partial_doubles = true
-  end
-
-  # This option will default to `:apply_to_host_groups` in RSpec 4 (and will
-  # have no way to turn it off -- the option exists only for backwards
-  # compatibility in RSpec 3). It causes shared context metadata to be
-  # inherited by the metadata hash of host groups and examples, rather than
-  # triggering implicit auto-inclusion in groups with matching metadata.
-  config.shared_context_metadata_behavior = :apply_to_host_groups
-
-# The settings below are suggested to provide a good initial experience
-# with RSpec, but feel free to customize to your heart's content.
-=begin
-  # This allows you to limit a spec run to individual examples or groups
-  # you care about by tagging them with `:focus` metadata. When nothing
-  # is tagged with `:focus`, all examples get run. RSpec also provides
-  # aliases for `it`, `describe`, and `context` that include `:focus`
-  # metadata: `fit`, `fdescribe` and `fcontext`, respectively.
-  config.filter_run_when_matching :focus
-
-  # Allows RSpec to persist some state between runs in order to support
-  # the `--only-failures` and `--next-failure` CLI options. We recommend
-  # you configure your source control system to ignore this file.
-  config.example_status_persistence_file_path = "spec/examples.txt"
-
-  # Limits the available syntax to the non-monkey patched syntax that is
-  # recommended. For more details, see:
-  #   - http://rspec.info/blog/2012/06/rspecs-new-expectation-syntax/
-  #   - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
-  #   - http://rspec.info/blog/2014/05/notable-changes-in-rspec-3/#zero-monkey-patching-mode
-  config.disable_monkey_patching!
-
-  # This setting enables warnings. It's recommended, but in some cases may
-  # be too noisy due to issues in dependencies.
-  config.warnings = true
-
-  # Many RSpec users commonly either run the entire suite or an individual
-  # file, and it's useful to allow more verbose output when running an
-  # individual spec file.
-  if config.files_to_run.one?
-    # Use the documentation formatter for detailed output,
-    # unless a formatter has already been configured
-    # (e.g. via a command-line flag).
-    config.default_formatter = "doc"
-  end
-
-  # Print the 10 slowest examples and example groups at the
-  # end of the spec run, to help surface which specs are running
-  # particularly slow.
-  config.profile_examples = 10
-
-  # Run specs in random order to surface order dependencies. If you find an
-  # order dependency and want to debug it, you can fix the order by providing
-  # the seed, which is printed after each run.
-  #     --seed 1234
-  config.order = :random
-
-  # Seed global randomization in this process using the `--seed` CLI option.
-  # Setting this allows you to use `--seed` to deterministically reproduce
-  # test failures related to randomization by passing the same `--seed` value
-  # as the one that triggered the failure.
-  Kernel.srand config.seed
-=end
-end
-
-def fixture(name)
-  path = File.expand_path('fixtures', File.dirname(__FILE__))
-  file = File.expand_path(name, path)
-  File.readlines(file).map{|l| l.chomp}
-end
-

data/spec/transport_spec.rb

@@ -1,119 +0,0 @@
-include Opensips::MI
-
-describe Transport do
-  context "fifo" do
-    it "must raise when using unknown transport method" do
-      expect {
-        Opensips::MI.connect(:unknown_transport_method,{})
-      }.to raise_error NameError
-    end
-
-    it "must raise when no fifo_nameInstanceOf.new parameter passed" do
-      expect {
-        Opensips::MI.connect :fifo, {}
-      }.to raise_error ArgumentError
-    end
-
-    it "must raise when fifo_name file not exists" do
-      allow(File).to receive(:exists?).and_return(false)
-      expect {
-        Opensips::MI.connect :fifo, :fifo_name => '/file/not/exists'
-      }.to raise_error ArgumentError
-    end
-
-    it "must raise when fifo_name file is not pipe" do
-      allow(File).to receive(:exists?).and_return(true)
-      allow(File).to receive(:pipe?).and_return(false)
-      expect {
-        Opensips::MI.connect :fifo, :fifo_name => '/tmp/opensips_fifo'
-      }.to raise_error ArgumentError
-    end
-
-    it "must raise if fifo reply directory not exists" do
-      allow(Dir).to receive(:exists?).and_return(false)
-      expect {
-        Opensips::MI.connect :fifo, :fifo_name => '/tmp/opensips_fifo',
-        :reply_dir => '/tmp'
-      }.to raise_error ArgumentError
-    end
-  end
-
-  context "datagram" do
-    it "must raise if empty host" do
-      expect {
-        Opensips::MI.connect :datagram, {}
-      }.to raise_error ArgumentError
-    end
-
-    it "must raise if empty port" do
-      expect {
-        Opensips::MI.connect :datagram, {:host => "10.10.10.10"}
-      }.to raise_error ArgumentError
-    end
-
-    it "must raise if invalid host" do
-      host = "256.0.0.300"
-      expect {
-        Opensips::MI.connect :datagram, {:host => host, :port => 8088}
-      }.to raise_error(SocketError, /#{host}/)
-    end
-
-    it "must raise if invalid port" do
-      expect {
-        Opensips::MI.connect :datagram, {:host => "10.0.0.1", :port => (2**16 + 1)}
-      }.to raise_error SocketError
-
-      expect {
-        Opensips::MI.connect :datagram, {:host => "10.0.0.1", :port => 0}
-      }.to raise_error SocketError
-    end
-
-    it "default timeout is 3 sec" do
-      mi=Opensips::MI.connect :datagram, {:host => "10.0.0.1", :port => 8088}
-      expect(mi.tout).to be(3)
-    end
-
-    it "must set timeout from params" do
-      mi=Opensips::MI.connect :datagram, {:host => "10.0.0.1", :port => 8088, :timeout => 15}
-      expect(mi.tout).to be(15)
-    end
-
-    it "must return socket error" do
-      mi=Opensips::MI.connect :datagram, {:host => "10.0.0.1", :port => 8088, :timeout => 1}
-      expect(mi.uptime.code).to be(500)
-      expect(mi.uptime.success).to be_falsey
-      expect(mi.uptime.message).to eq("recvfrom timed out after 1 seconds")
-    end
-  end
-
-  context "xmlrpc" do
-    it "must raise if empty host" do
-      expect {
-        Opensips::MI.connect :xmlrpc, {}
-      }.to raise_error ArgumentError
-    end
-
-    it "must raise if empty port" do
-      expect {
-        Opensips::MI.connect :xmlrpc, {:host => "10.10.10.10"}
-      }.to raise_error ArgumentError
-    end
-
-    it "must raise if invalid host" do
-      host = "256.0.0.300"
-      expect {
-        Opensips::MI.connect :xmlrpc, {:host => host, :port => 8088}
-      }.to raise_error(SocketError, /#{host}/)
-    end
-
-    it "must raise if invalid port" do
-      expect {
-        Opensips::MI.connect :xmlrpc, {:host => "10.0.0.1", :port => (2**16 + 1)}
-      }.to raise_error SocketError
-
-      expect {
-        Opensips::MI.connect :xmlrpc, {:host => "10.0.0.1", :port => 0}
-      }.to raise_error SocketError
-    end
-  end
-end