openreceive 0.4.27 → 0.4.29

data/skills/integrate-openreceive/references/paymenter.md

@@ -0,0 +1,369 @@
+This is the full file; follow it from Step 0.
+
+# OpenReceive agent directions (Paymenter)
+
+```sh
+# READ THIS FIRST: this file is 19 KB and a summary drops required steps. Download it whole:
+curl -fsSL https://openreceive.org/agent-directions/paymenter/full.md
+# Skip the download only if you already have all of it: pasted, read from disk or fetched raw.
+```
+
+**Step 0 in brief** (Step 0 below has the details):
+
+- Before installing or editing anything, ask the user for a receive-only NWC code. One question per message.
+- Next ask for the LSC code. If the user wants stablecoins, USDT, USDC, ETH, SOL or crypto, do not ask yes/no first.
+- The user only pastes codes into this chat. Never ask them to run a command, edit a file or use an admin page.
+- Store each code yourself as Step 2 says. Never put a code in a shell command.
+- Do not suggest rotating or revoking a code because it was pasted here.
+- Setup is done only when the NWC code is saved, and the LSC code is saved or the user said "Bitcoin only".
+
+These directions describe OpenReceive 0.4.29.
+
+Install and configure the OpenReceive payment gateway in the Paymenter billing
+panel you are working in. Preserve its theme, clients, products, invoices and
+prices. The extension is one folder that bundles the PHP engine and the
+checkout's script: do not install Composer or npm packages into Paymenter, and
+do not clone the OpenReceive repository.
+
+The one required credential is a receive-only NWC code (Nostr Wallet Connect):
+a string from the merchant's wallet that can create invoices and read their
+status, and cannot spend. A swap provider (an "LSC" code) optionally lets
+clients pay with USDT, USDC, ETH or SOL instead; the provider converts the
+payment to BTC over Lightning in the merchant's connected wallet. Available
+assets and networks depend on the provider.
+
+Run every `php artisan` command below in Paymenter's directory, as the web
+server's user, never as root: a root run can leave Paymenter's log file owned
+by root, and then every page fails. With Paymenter's official Docker image,
+that is `docker compose exec -T -u nginx paymenter php artisan …` (`-T` passes
+stdin through; use the Paymenter service's own name). On a server, it is
+`sudo -u www-data php artisan …` with the site's own user.
+
+## Step 0 — ask for the two codes, one question at a time
+
+Before anything else, check one thing: whether OpenReceive is already
+installed (`php artisan openreceive:doctor`). If the command exists, it prints
+`NWC_URI: set` or `unset` (likewise `LSC_URI_PRIMARY`), never the values. A
+code that is already set is not asked for again; if both are set, skip to
+Step 3.
+
+Otherwise your next action is a question to the user. Do not download the
+extension, edit Docker files or search anywhere else before asking it. Do not
+read Paymenter's `.env`, deploy config, container environments or other
+projects looking for a code: a new install has neither code yet.
+
+The user never runs a command and never edits a file. They paste each code
+into this chat; you store it. That is the supported path: do not ask them to
+run the save command themselves, and do not tell them to revoke or replace a
+code because it was pasted here. Ask one question per message.
+
+1. **First message — the NWC code, and nothing else.**
+
+   > To receive payments I need a receive-only wallet code. In Rizful: open
+   > the menu, tap NWC, choose Receive-only NWC code, and tap Copy
+   > (https://openreceive.org/get_a_nwc_code_to_receive_payments). If you would
+   > rather run your own wallet, Alby Hub works too: Connections → Add
+   > Connection → Read Only. Paste the code here and I will store it.
+
+2. **When they paste it.** If it does not start with `nostr+walletconnect://`,
+   ask them to copy the receive-only code again. Otherwise do not repeat it:
+   reply only that you have it, then ask the next question. You store it in
+   Step 2.
+3. **Second message — swaps.** If the user asked for stablecoins, USDT, USDC,
+   ETH, SOL, altcoins or "crypto" (as in "Bitcoin and stablecoin payments"),
+   this message IS the walkthrough below: do not skip it, and do not ask yes
+   or no first. Otherwise ask whether clients should also be able to pay
+   with USDT, USDC, ETH or SOL, then give the walkthrough. The walkthrough:
+
+   > Go to https://lightning-swap.com, sign in for API keys, create a key, and
+   > copy the whole URI (https://openreceive.org/set_up_swap_provider). Paste
+   > it here and I will store it — or say "Bitcoin only" and I will continue
+   > without it.
+
+   Mention FixedFloat only if they already use it.
+4. **When they paste it.** If it does not start with
+   `lightning+swapconnect://`, ask them to copy it again. Swaps are now on,
+   so keep the route back (the swap non-negotiable below).
+
+Do not report setup as complete until the NWC code is saved, and the LSC code
+is saved or the user said "Bitcoin only". Never invent a placeholder code.
+
+## Step 1 — install the extension
+
+The extension is the ZIP attached to this GitHub release. It holds one
+`OpenReceive` folder, which goes into Paymenter's `extensions/Gateways/`
+directory. Never install the GitHub source-code ZIP or a ZIP from an older
+release. With Paymenter's official Docker image, download and unpack it inside
+the container, as the web user:
+
+```sh
+docker compose exec -T -u nginx paymenter sh -c 'cd /app/extensions/Gateways && curl -fsSLO https://github.com/OpenReceive/openreceive/releases/download/v0.4.29/openreceive-paymenter-0.4.29.zip && unzip -q openreceive-paymenter-0.4.29.zip && rm openreceive-paymenter-0.4.29.zip'
+docker compose exec -T -u nginx paymenter php artisan app:extension:install gateway OpenReceive
+```
+
+On a server, unpack it into `<paymenter>/extensions/Gateways/` the same way,
+make the folder the web user's, and run the same `app:extension:install`. That
+command creates the extension's two tables in Paymenter's database and its
+gateway, "Bitcoin Lightning". Checkout offers it once a wallet code is saved.
+
+The extension needs Paymenter 1.5 or later on 64-bit PHP 8.3+ with GMP and
+sodium. The official image has all of them. If doctor reports a missing PHP
+extension on a server, say which one and stop: installing PHP extensions on
+the user's server is theirs to decide.
+
+## Step 2 — store the codes
+
+Store each code yourself, one per command, and never as a shell argument:
+
+1. Write the code with your file-editing tool, not a shell command (no
+   `echo`, `printf` or heredoc), to a new file outside the Paymenter
+   directory, such as `/tmp/openreceive-code`.
+2. Run `php artisan openreceive:configure --nwc-uri=- < /tmp/openreceive-code`.
+   In Docker: `docker compose exec -T -u nginx paymenter php artisan openreceive:configure --nwc-uri=- < /tmp/openreceive-code`.
+   For the LSC code, use `--lsc-uri-primary=-`.
+3. Delete the file (`rm /tmp/openreceive-code`), whether the command passed
+   or not.
+
+The command asks the wallet first and saves the code, encrypted with
+Paymenter's `APP_KEY`, only when the wallet answers as receive-only; a failure
+saves nothing. If it reports spend methods such as `pay_invoice`, ask the user
+for a receive-only code again. Saving the swap code renames the gateway to
+"Bitcoin & stablecoins". Never write a code into Paymenter's settings table,
+`.env` or any file in the Paymenter directory yourself.
+
+Then run `php artisan openreceive:doctor`. It names any failed check and exits
+nonzero; fix it before going on.
+
+## Step 3 — mint a test invoice, then stop
+
+Create a small unpaid test invoice, billed to the first admin account without
+Paymenter's new-invoice email, and mint its Lightning invoice:
+
+```sh
+php artisan openreceive:test-invoice --new
+```
+
+To use an invoice that already exists, pass its id instead of `--new`.
+`test-invoice` goes through the same route as the invoice's payment dialog. It
+prints the amount in sats, the BOLT11 invoice, the invoice page and the
+methods the dialog offers, each swap asset marked available or followed by
+the reason it is not. That reason is the answer; report it. "Below the
+provider minimum" or "above the provider maximum" is about this invoice's
+amount, not a fault. Only when the reason says the provider is unreachable
+does doctor's "Swap provider" line have more detail. `test-invoice` and
+`doctor` are the whole check.
+
+Give the user the invoice page; its **Pay** button opens the checkout on this
+same invoice. Tell them the test invoice is theirs to cancel.
+
+You cannot pay the invoice: the code is receive-only. Do not pay, settle or
+mark the invoice paid, and do not look for a way to (a wallet control port, a
+test endpoint, another wallet). If the user wants a real settlement test, they
+pay from the invoice page with their own wallet; afterwards the invoice reads
+paid.
+
+Setup ends here. Once doctor is clean and the user has the link, your last
+message starts "Setup is finished" and has at most six short lines: the
+invoice page, the methods the checkout offers (Bitcoin, plus USDT, USDC, ETH
+and SOL when the swap code is saved), and one line of what to look at. Do not
+list each coin's availability, mention a minimum, or say a coin will not work:
+a provider minimum depends on the invoice total, and real invoices will
+differ. Do not list what you changed or what doctor checked. Send nothing
+after it. Do not add containers, services, workers or cron jobs: Paymenter's
+own cron job runs the extension's every-minute pass. If doctor says
+Paymenter's scheduler has never run, say so in one line of that message.
+
+## Non-negotiables
+
+- Never print, log or commit a code, never put one in a shell argument, and
+  never write one into source files, `.env`, the database or browser code.
+  Doctor's set/unset is all you report.
+- Do not suggest rotating, revoking or replacing a code because it was pasted
+  into this chat; that is the supported path.
+- Work only in this Paymenter. Never read or run anything from another project
+  or directory on this machine (its `node_modules`, tools or source), for any
+  reason. A browser, Playwright, hand-made calls to the checkout's routes,
+  `tinker` and reading the extension's source are not part of setup: when
+  doctor or `test-invoice` fails, report its output.
+- Run `php artisan` as the web server's user, never as root.
+- Receive-only NWC is required. Never get past the preflight with a code that
+  can spend.
+- The extension owns only its two payment tables in Paymenter's database.
+  Paymenter owns clients, invoices, prices, services and email. Do not add an
+  external payment database or custom fulfillment code, and do not edit
+  Paymenter's own files.
+- IF SWAPS ARE ON, KEEP THE ROUTE BACK. A deposit that arrives short or late
+  becomes refundable, and the client claims it later from the same invoice's
+  payment dialog. Keep the extension installed while swap payments may still
+  need a refund. https://openreceive.org/guides/swap-refunds.md
+- A receive-only wallet cannot send refunds. Refund a settled payment manually
+  from the wallet.
+
+## Further reading
+
+- [Paymenter Quickstart](https://openreceive.org/guides/quickstart-paymenter.md)
+- [Automated Swaps](https://openreceive.org/guides/automated-swaps.md)
+- [Swap Refunds](https://openreceive.org/guides/swap-refunds.md)
+- [Lightning Swap Connect URI](https://openreceive.org/guides/lightning-swap-connect.md)
+- [Security](https://openreceive.org/guides/security.md)
+- [Price Feeds](https://openreceive.org/guides/price-feeds.md)
+- [Payment Safety Upgrade](https://openreceive.org/guides/payment-safety-upgrade.md)
+
+---
+
+## The quickstart, in full
+
+Inlined verbatim so this file needs no network access. Steps 0–3 above are the setup and this is their reference: where the two differ, the steps win, and its admin-area screens are only for a Paymenter with no shell.
+The page it comes from is https://openreceive.org/guides/quickstart-paymenter.
+
+## Paymenter quickstart
+
+[Paymenter](https://paymenter.org) is an open-source billing panel for hosting
+companies. The OpenReceive extension adds a payment method to it: the client
+pays an invoice with Bitcoin over Lightning, straight into your own wallet,
+from Paymenter's own payment dialog. With a swap provider, the same dialog
+also takes USDT, USDC, SOL and ETH, which the provider converts to BTC over
+Lightning into the same wallet.
+
+Paymenter keeps owning clients, invoices, prices and services. The extension
+keeps its payment attempts in two tables of Paymenter's own database. When a
+payment settles, it records the payment on the invoice with Paymenter's own
+payment call, so the invoice turns paid and Paymenter activates or renews the
+service as it does for any other gateway.
+
+Requirements: Paymenter 1.5 or later, on 64-bit PHP 8.3 or later with GMP and
+sodium, and MySQL or MariaDB. Paymenter's official Docker image has all of
+them. Paymenter's cron job must run, as Paymenter's own install guide sets up.
+
+### Install the extension
+
+Each GitHub release attaches the extension as a ZIP that holds one
+`OpenReceive` folder. It belongs in Paymenter's `extensions/Gateways/`
+directory, next to Stripe and PayPal:
+
+```sh
+cd /var/www/paymenter
+curl -fsSLO https://github.com/OpenReceive/openreceive/releases/download/v0.4.29/openreceive-paymenter-0.4.29.zip
+unzip -q openreceive-paymenter-0.4.29.zip -d extensions/Gateways
+rm openreceive-paymenter-0.4.29.zip
+chown -R www-data:www-data extensions/Gateways/OpenReceive
+sudo -u www-data php artisan app:extension:install gateway OpenReceive
+```
+
+Use your own Paymenter directory and web server user. The last command creates
+the extension's two tables and its gateway, named "Bitcoin Lightning". Until a
+wallet code is saved, checkout does not offer it.
+
+The ZIP already bundles the extension's dependencies and the checkout's
+script, under their own prefixed names, so Composer never runs and nothing in
+Paymenter's own `vendor/` changes. Paymenter updates leave the folder alone.
+The GitHub source-code ZIP is not an installable extension.
+
+#### Paymenter in Docker
+
+The official Compose file mounts `./extensions` into the container, so unzip
+into the `extensions/Gateways` folder next to `compose.yml`. Run the artisan
+commands inside the container as its web user, `nginx`:
+
+```sh
+docker compose exec -u nginx paymenter php artisan app:extension:install gateway OpenReceive
+```
+
+Always pass `-u nginx`. A command that runs as root can create Paymenter's
+daily log file as root, and every web request then fails with a 500 until you
+fix the ownership with `chown -R nginx:nginx /app/storage`.
+
+### Configure the wallet
+
+You need a receive-only NWC code: a Nostr Wallet Connect code that can create
+invoices and read payments but cannot spend. The extension refuses a code that
+can spend.
+
+In the admin area, open **Gateways**, edit **Bitcoin Lightning**, paste the
+code into **Receive-only NWC code** and save. To accept stablecoins too, paste a
+swap provider code into **Swap provider code**. Paymenter stores both
+encrypted with its `APP_KEY`.
+
+From a terminal, pipe each code into `openreceive:configure` from your secret
+manager or a protected file. Never type a code as a command argument:
+
+```sh
+sudo -u www-data php artisan openreceive:configure --nwc-uri=- < /secure/path/wallet-code
+sudo -u www-data php artisan openreceive:configure --lsc-uri-primary=- < /secure/path/swap-code
+sudo -u www-data php artisan openreceive:doctor
+```
+
+`configure` asks the wallet first and saves the code only when it answers as a
+receive-only wallet. Saving a swap code renames the default "Bitcoin Lightning"
+to "Bitcoin & stablecoins"; `--name="…"` sets your own. Omit the swap command
+for Bitcoin-only checkout.
+
+`doctor` checks the gateway, GMP and sodium, each code as set or unset (never
+its value), the tables, the routes, the wallet, the price feed for every
+Paymenter currency, each swap provider and the scheduled pass. It exits
+nonzero when a check fails.
+
+### Check it
+
+Make a Lightning invoice through the same route the payment dialog uses, for a
+new $5 test invoice billed to the first admin account, or for any unpaid
+invoice by its id:
+
+```sh
+sudo -u www-data php artisan openreceive:test-invoice --new
+sudo -u www-data php artisan openreceive:test-invoice <invoice id>
+```
+
+`--new` sends no new-invoice email; `--amount=` and `--user=<email>` change
+what it bills and to whom. Cancel the test invoice in the admin area when you
+are done.
+
+It prints the amount in sats, the Lightning invoice and the invoice page, then
+each method the dialog offers: Bitcoin Lightning, and each swap asset with its
+network and whether it is available for this amount. A small invoice is often
+below a swap provider's minimum; that is the amount, not a fault.
+
+### How a payment works
+
+1. The client opens the invoice, presses **Pay** and picks the OpenReceive
+   method. The checkout opens inside Paymenter's payment dialog.
+2. The extension charges what is still due on the invoice, in the invoice's
+   currency, converted to sats at the current BTC price. Only the client the
+   invoice belongs to, signed in, can make or follow its payment.
+3. Once the wallet reports the payment, the extension records it on the
+   invoice in the same database transaction that settles it. The payment hash
+   is the transaction id. Paymenter then marks the invoice paid and runs its
+   usual work, such as activating the service and sending the receipt.
+4. The dialog returns the client to the invoice, now paid.
+
+The checkout asks the wallet while the dialog is open. If the client closes it
+before the payment settles, the extension's pass on Paymenter's scheduler finds
+the payment within a minute or so. `php artisan openreceive:reconcile` runs one
+pass by hand.
+
+A client who closes the dialog and comes back to the invoice gets the same
+Lightning invoice again while it is still valid.
+
+### Refunds and removal
+
+The receive-only wallet cannot send refunds. Send a refund from your own
+wallet, then record it in Paymenter. A client whose swap deposit never
+converted reclaims it from the same invoice's payment dialog, while the invoice
+is still unpaid. If you turn on swaps, you commit to keeping that path
+available. See [swap refunds](https://openreceive.org/guides/swap-refunds.md).
+
+Deleting the gateway keeps the two tables: they are a record of payments
+received.
+
+### Tested, and not tested
+
+Tested on 2026-10-16 with Paymenter 1.5.9's official Docker image and MariaDB
+11.8, a test wallet and a test swap provider: install from the built ZIP,
+configure from stdin, the doctor, and a client paying an invoice by Lightning
+in Chromium, after which the invoice reads paid with the payment hash as its
+transaction.
+
+Not tested: PostgreSQL or SQLite, Paymenter in a subdirectory of a domain, and
+Paymenter's automatic charges of saved payment methods. Lightning cannot pull
+a payment, so OpenReceive offers no saved payment method: the client pays
+each renewal invoice.

data/skills/integrate-openreceive/references/php.md

@@ -17,7 +17,7 @@ curl -fsSL https://openreceive.org/agent-directions/php/full.md
 - Do not suggest rotating or revoking a code because it was pasted here.
 - Start the quickstart only once the NWC code is saved, and the LSC code is saved or the user said "Bitcoin only".
 
-These directions describe OpenReceive 0.4.27.
+These directions describe OpenReceive 0.4.29.
 
 Add OpenReceive to a PHP application — the app you are already working in. You
 do not need a copy of the OpenReceive source: the engine is on Packagist

data/skills/integrate-openreceive/references/rails.md

@@ -17,7 +17,7 @@ curl -fsSL https://openreceive.org/agent-directions/rails/full.md
 - Do not suggest rotating or revoking a code because it was pasted here.
 - Start the quickstart only once the NWC code is saved, and the LSC code is saved or the user said "Bitcoin only".
 
-These directions describe OpenReceive 0.4.27.
+These directions describe OpenReceive 0.4.29.
 
 Add OpenReceive to a Rails application — the app you are already working in. You
 do not need a copy of the OpenReceive source: the gem is on RubyGems, the

data/skills/integrate-openreceive/references/react-router.md

@@ -17,7 +17,7 @@ curl -fsSL https://openreceive.org/agent-directions/react-router/full.md
 - Do not suggest rotating or revoking a code because it was pasted here.
 - Start the quickstart only once the NWC code is saved, and the LSC code is saved or the user said "Bitcoin only".
 
-These directions describe OpenReceive 0.4.27.
+These directions describe OpenReceive 0.4.29.
 
 Add OpenReceive to a React Router application in framework mode — the app
 you are already working in, on Node. OpenReceive ships no React Router
@@ -327,7 +327,7 @@ products, and you do not join them.
   app's equivalent) through the `query` the library hands you, on that same
   settlement transaction, not a second connection from your ORM. Database writes
   only in the hook; emails, jobs, and pushes after commit. Placeholder style is
-  the dialect you declared: `?` on sqlite, `$1` on postgres.
+  the dialect you declared: `?` on sqlite and mysql, `$1` on postgres.
 
 ## If you build your own checkout UI
 

data/skills/integrate-openreceive/references/sveltekit.md

@@ -17,7 +17,7 @@ curl -fsSL https://openreceive.org/agent-directions/sveltekit/full.md
 - Do not suggest rotating or revoking a code because it was pasted here.
 - Start the quickstart only once the NWC code is saved, and the LSC code is saved or the user said "Bitcoin only".
 
-These directions describe OpenReceive 0.4.27.
+These directions describe OpenReceive 0.4.29.
 
 Add OpenReceive to a SvelteKit application — the app you are already working
 in, on `@sveltejs/adapter-node`. OpenReceive ships no SvelteKit package: the
@@ -335,7 +335,7 @@ products, and you do not join them.
   app's equivalent) through the `query` the library hands you, on that same
   settlement transaction, not a second connection from your ORM. Database writes
   only in the hook; emails, jobs, and pushes after commit. Placeholder style is
-  the dialect you declared: `?` on sqlite, `$1` on postgres.
+  the dialect you declared: `?` on sqlite and mysql, `$1` on postgres.
 
 ## If you build your own checkout UI
 

data/skills/integrate-openreceive/references/tanstack-start.md

@@ -17,7 +17,7 @@ curl -fsSL https://openreceive.org/agent-directions/tanstack-start/full.md
 - Do not suggest rotating or revoking a code because it was pasted here.
 - Start the quickstart only once the NWC code is saved, and the LSC code is saved or the user said "Bitcoin only".
 
-These directions describe OpenReceive 0.4.27.
+These directions describe OpenReceive 0.4.29.
 
 Add OpenReceive to a TanStack Start application on Node — the app you are
 already working in, with its own Postgres. OpenReceive ships no TanStack
@@ -356,7 +356,7 @@ products, and you do not join them.
   app's equivalent) through the `query` the library hands you, on that same
   settlement transaction, not a second connection from your ORM. Database writes
   only in the hook; emails, jobs, and pushes after commit. Placeholder style is
-  the dialect you declared: `?` on sqlite, `$1` on postgres.
+  the dialect you declared: `?` on sqlite and mysql, `$1` on postgres.
 
 ### If the database is Supabase
 

data/skills/integrate-openreceive/references/woocommerce.md

@@ -17,7 +17,7 @@ curl -fsSL https://openreceive.org/agent-directions/woocommerce/full.md
 - Do not suggest rotating or revoking a code because it was pasted here.
 - Setup is done only when the NWC code is saved, and the LSC code is saved or the user said "Bitcoin only".
 
-These directions describe OpenReceive 0.4.27.
+These directions describe OpenReceive 0.4.29.
 
 Install and configure the OpenReceive payment gateway in the WooCommerce store
 you are working in. Preserve its theme, checkout, customer accounts, order
@@ -95,7 +95,7 @@ is saved or the user said "Bitcoin only". Never invent a placeholder code.
 Install this release from the WordPress.org plugin directory:
 
 ```sh
-wp plugin install openreceive --version=0.4.27 --activate
+wp plugin install openreceive --version=0.4.29 --activate
 ```
 
 If that fails because WordPress.org does not have this version yet, install
@@ -103,7 +103,7 @@ the ZIP attached to the same GitHub release. Never install the GitHub
 source-code ZIP or a ZIP from an older release:
 
 ```sh
-wp plugin install https://github.com/OpenReceive/openreceive/releases/download/v0.4.27/openreceive-wordpress-0.4.27.zip --activate
+wp plugin install https://github.com/OpenReceive/openreceive/releases/download/v0.4.29/openreceive-wordpress-0.4.29.zip --activate
 ```
 
 It needs WooCommerce active, and PHP 8.2+ with GMP and sodium in BOTH the web
@@ -235,7 +235,9 @@ The page it comes from is https://openreceive.org/guides/quickstart-woocommerce.
 
 The [WordPress integration entry point](https://openreceive.org/integrations/wordpress)
 redirects to the WooCommerce integration, which uses this same guide and agent
-directions. OpenReceive checkout on WordPress requires WooCommerce.
+directions. OpenReceive checkout on WordPress needs WooCommerce or Easy
+Digital Downloads; this guide covers WooCommerce, and the
+[Easy Digital Downloads quickstart](https://openreceive.org/guides/quickstart-edd.md) covers EDD.
 
 Activate WooCommerce first. Then install OpenReceive from the
 [WordPress.org plugin directory](https://wordpress.org/plugins/openreceive/):
@@ -252,7 +254,7 @@ database or application.
 
 Each GitHub release also attaches the same plugin as a ZIP, for a site that
 cannot reach WordPress.org or when WordPress.org does not list a release yet.
-Download [openreceive-wordpress-0.4.27.zip](https://github.com/OpenReceive/openreceive/releases/download/v0.4.27/openreceive-wordpress-0.4.27.zip)
+Download [openreceive-wordpress-0.4.29.zip](https://github.com/OpenReceive/openreceive/releases/download/v0.4.29/openreceive-wordpress-0.4.29.zip)
 and install it through **Plugins → Add New → Upload Plugin**. Historical
 releases may lack this asset. If that exact URL returns 404, build the same tag
 below; never silently install an older ZIP. The GitHub source-code ZIP is not
@@ -262,7 +264,7 @@ GMP/sodium, Composer and WP-CLI:
 ```sh
 git clone https://github.com/OpenReceive/openreceive.git
 cd openreceive
-git checkout v0.4.27
+git checkout v0.4.29
 npm ci
 npm run build:packages
 composer install --working-dir=packages/php/wordpress

metadata

@@ -1,7 +1,7 @@
 --- !ruby/object:Gem::Specification
 name: openreceive
 version: !ruby/object:Gem::Version
-  version: 0.4.27
+  version: 0.4.29
 platform: ruby
 authors:
 - OpenReceive
@@ -57,18 +57,23 @@ files:
 - skills/debug-openreceive-payment/SKILL.md
 - skills/integrate-openreceive/SKILL.md
 - skills/integrate-openreceive/references/astro.md
+- skills/integrate-openreceive/references/bolt.md
 - skills/integrate-openreceive/references/btcpay.md
 - skills/integrate-openreceive/references/django.md
+- skills/integrate-openreceive/references/edd.md
 - skills/integrate-openreceive/references/fastapi.md
 - skills/integrate-openreceive/references/fastify.md
 - skills/integrate-openreceive/references/flask.md
+- skills/integrate-openreceive/references/fossbilling.md
 - skills/integrate-openreceive/references/laravel.md
 - skills/integrate-openreceive/references/lovable.md
+- skills/integrate-openreceive/references/medusa.md
 - skills/integrate-openreceive/references/mobile.md
 - skills/integrate-openreceive/references/nestjs.md
 - skills/integrate-openreceive/references/next.md
 - skills/integrate-openreceive/references/node.md
 - skills/integrate-openreceive/references/nuxt.md
+- skills/integrate-openreceive/references/paymenter.md
 - skills/integrate-openreceive/references/php.md
 - skills/integrate-openreceive/references/rails.md
 - skills/integrate-openreceive/references/react-router.md