onemorecloud-websolr-rails 1.1.1

data/solr/solr/conf/solrconfig.xml

@@ -0,0 +1,458 @@
+<?xml version="1.0" encoding="UTF-8" ?>
+<!--
+ Licensed to the Apache Software Foundation (ASF) under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The ASF licenses this file to You under the Apache License, Version 2.0
+ (the "License"); you may not use this file except in compliance with
+ the License.  You may obtain a copy of the License at
+
+     http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+
+<config>
+  <!-- Set this to 'false' if you want solr to continue working after it has 
+       encountered an severe configuration error.  In a production environment, 
+       you may want solr to keep working even if one handler is mis-configured.
+
+       You may also set this to false using by setting the system property:
+         -Dsolr.abortOnConfigurationError=false
+     -->
+  <abortOnConfigurationError>${solr.abortOnConfigurationError:true}</abortOnConfigurationError>
+
+  <!-- Used to specify an alternate directory to hold all index data
+       other than the default ./data under the Solr home.
+       If replication is in use, this should match the replication configuration. -->
+
+  <dataDir>${solr.data.dir:./solr/data}</dataDir>
+
+  <indexDefaults>
+   <!-- Values here affect all index writers and act as a default unless overridden. -->
+    <useCompoundFile>false</useCompoundFile>
+    <mergeFactor>10</mergeFactor>
+    <maxBufferedDocs>1000</maxBufferedDocs>
+    <maxMergeDocs>2147483647</maxMergeDocs>
+    <maxFieldLength>10000</maxFieldLength>
+    <writeLockTimeout>1000</writeLockTimeout>
+    <commitLockTimeout>10000</commitLockTimeout>
+  </indexDefaults>
+
+  <mainIndex>
+    <!-- options specific to the main on-disk lucene index -->
+    <useCompoundFile>false</useCompoundFile>
+    <mergeFactor>10</mergeFactor>
+    <maxBufferedDocs>1000</maxBufferedDocs>
+    <maxMergeDocs>2147483647</maxMergeDocs>
+    <maxFieldLength>10000</maxFieldLength>
+
+    <!-- If true, unlock any held write or commit locks on startup. 
+         This defeats the locking mechanism that allows multiple
+         processes to safely access a lucene index, and should be
+         used with care. -->
+    <unlockOnStartup>false</unlockOnStartup>
+  </mainIndex>
+
+  <!-- the default high-performance update handler -->
+  <updateHandler class="solr.DirectUpdateHandler2">
+
+    <!-- A prefix of "solr." for class names is an alias that
+         causes solr to search appropriate packages, including
+         org.apache.solr.(search|update|request|core|analysis)
+     -->
+
+    <!-- autocommit pending docs if certain criteria are met 
+    <autoCommit> 
+      <maxDocs>10000</maxDocs>
+      <maxTime>1000</maxTime>
+    </autoCommit>
+    -->
+
+    <!-- The RunExecutableListener executes an external command.
+         exe - the name of the executable to run
+         dir - dir to use as the current working directory. default="."
+         wait - the calling thread waits until the executable returns. default="true"
+         args - the arguments to pass to the program.  default=nothing
+         env - environment variables to set.  default=nothing
+      -->
+    <!-- A postCommit event is fired after every commit or optimize command
+    <listener event="postCommit" class="solr.RunExecutableListener">
+      <str name="exe">snapshooter</str>
+      <str name="dir">solr/bin</str>
+      <bool name="wait">true</bool>
+      <arr name="args"> <str>arg1</str> <str>arg2</str> </arr>
+      <arr name="env"> <str>MYVAR=val1</str> </arr>
+    </listener>
+    -->
+    <!-- A postOptimize event is fired only after every optimize command, useful
+         in conjunction with index distribution to only distribute optimized indicies 
+    <listener event="postOptimize" class="solr.RunExecutableListener">
+      <str name="exe">snapshooter</str>
+      <str name="dir">solr/bin</str>
+      <bool name="wait">true</bool>
+    </listener>
+    -->
+
+  </updateHandler>
+
+
+  <query>
+    <!-- Maximum number of clauses in a boolean query... can affect
+        range or prefix queries that expand to big boolean
+        queries.  An exception is thrown if exceeded.  -->
+    <maxBooleanClauses>1024</maxBooleanClauses>
+
+    
+    <!-- Cache used by SolrIndexSearcher for filters (DocSets),
+         unordered sets of *all* documents that match a query.
+         When a new searcher is opened, its caches may be prepopulated
+         or "autowarmed" using data from caches in the old searcher.
+         autowarmCount is the number of items to prepopulate.  For LRUCache,
+         the autowarmed items will be the most recently accessed items.
+       Parameters:
+         class - the SolrCache implementation (currently only LRUCache)
+         size - the maximum number of entries in the cache
+         initialSize - the initial capacity (number of entries) of
+           the cache.  (seel java.util.HashMap)
+         autowarmCount - the number of entries to prepopulate from
+           and old cache.
+         -->
+    <filterCache
+      class="solr.LRUCache"
+      size="512"
+      initialSize="512"
+      autowarmCount="256"/>
+
+   <!-- queryResultCache caches results of searches - ordered lists of
+         document ids (DocList) based on a query, a sort, and the range
+         of documents requested.  -->
+    <queryResultCache
+      class="solr.LRUCache"
+      size="512"
+      initialSize="512"
+      autowarmCount="256"/>
+
+  <!-- documentCache caches Lucene Document objects (the stored fields for each document).
+       Since Lucene internal document ids are transient, this cache will not be autowarmed.  -->
+    <documentCache
+      class="solr.LRUCache"
+      size="512"
+      initialSize="512"
+      autowarmCount="0"/>
+
+    <!-- If true, stored fields that are not requested will be loaded lazily.
+
+    This can result in a significant speed improvement if the usual case is to
+    not load all stored fields, especially if the skipped fields are large compressed
+    text fields.
+    -->
+    <enableLazyFieldLoading>true</enableLazyFieldLoading>
+
+    <!-- Example of a generic cache.  These caches may be accessed by name
+         through SolrIndexSearcher.getCache(),cacheLookup(), and cacheInsert().
+         The purpose is to enable easy caching of user/application level data.
+         The regenerator argument should be specified as an implementation
+         of solr.search.CacheRegenerator if autowarming is desired.  -->
+    <!--
+    <cache name="myUserCache"
+      class="solr.LRUCache"
+      size="4096"
+      initialSize="1024"
+      autowarmCount="1024"
+      regenerator="org.mycompany.mypackage.MyRegenerator"
+      />
+    -->
+
+   <!-- An optimization that attempts to use a filter to satisfy a search.
+         If the requested sort does not include score, then the filterCache
+         will be checked for a filter matching the query. If found, the filter
+         will be used as the source of document ids, and then the sort will be
+         applied to that.
+    <useFilterForSortedQuery>true</useFilterForSortedQuery>
+   -->
+
+   <!-- An optimization for use with the queryResultCache.  When a search
+         is requested, a superset of the requested number of document ids
+         are collected.  For example, if a search for a particular query
+         requests matching documents 10 through 19, and queryWindowSize is 50,
+         then documents 0 through 50 will be collected and cached.  Any further
+         requests in that range can be satisfied via the cache.  -->
+    <queryResultWindowSize>10</queryResultWindowSize>
+
+    <!-- This entry enables an int hash representation for filters (DocSets)
+         when the number of items in the set is less than maxSize.  For smaller
+         sets, this representation is more memory efficient, more efficient to
+         iterate over, and faster to take intersections.  -->
+    <HashDocSet maxSize="3000" loadFactor="0.75"/>
+
+
+    <!-- boolToFilterOptimizer converts boolean clauses with zero boost
+         into cached filters if the number of docs selected by the clause exceeds
+         the threshold (represented as a fraction of the total index) -->
+    <boolTofilterOptimizer enabled="true" cacheSize="32" threshold=".05"/>
+
+
+    <!-- a newSearcher event is fired whenever a new searcher is being prepared
+         and there is a current searcher handling requests (aka registered). -->
+    <!-- QuerySenderListener takes an array of NamedList and executes a
+         local query request for each NamedList in sequence. -->
+    <!--
+    <listener event="newSearcher" class="solr.QuerySenderListener">
+      <arr name="queries">
+        <lst> <str name="q">solr</str> <str name="start">0</str> <str name="rows">10</str> </lst>
+        <lst> <str name="q">rocks</str> <str name="start">0</str> <str name="rows">10</str> </lst>
+      </arr>
+    </listener>
+    -->
+
+    <!-- a firstSearcher event is fired whenever a new searcher is being
+         prepared but there is no current registered searcher to handle
+         requests or to gain autowarming data from. -->
+    <!--
+    <listener event="firstSearcher" class="solr.QuerySenderListener">
+      <arr name="queries">
+        <lst> <str name="q">fast_warm</str> <str name="start">0</str> <str name="rows">10</str> </lst>
+      </arr>
+    </listener>
+    -->
+
+    <!-- If a search request comes in and there is no current registered searcher,
+         then immediately register the still warming searcher and use it.  If
+         "false" then all requests will block until the first searcher is done
+         warming. -->
+    <useColdSearcher>false</useColdSearcher>
+
+    <!-- Maximum number of searchers that may be warming in the background
+      concurrently.  An error is returned if this limit is exceeded. Recommend
+      1-2 for read-only slaves, higher for masters w/o cache warming. -->
+    <maxWarmingSearchers>4</maxWarmingSearchers>
+
+  </query>
+
+  <!-- 
+    Let the dispatch filter handler /select?qt=XXX
+    handleSelect=true will use consistent error handling for /select and /update
+    handleSelect=false will use solr1.1 style error formatting
+    -->
+  <requestDispatcher handleSelect="true" >
+    <!--Make sure your system has some authentication before enabling remote streaming!  -->
+    <requestParsers enableRemoteStreaming="false" multipartUploadLimitInKB="2048" />
+  </requestDispatcher>
+  
+      
+  <!-- requestHandler plugins... incoming queries will be dispatched to the
+     correct handler based on the qt (query type) param matching the
+     name of registered handlers.
+     The "standard" request handler is the default and will be used if qt
+     is not specified in the request.
+  -->
+  <requestHandler name="standard" class="solr.StandardRequestHandler">
+    <!-- default values for query parameters -->
+     <lst name="defaults">
+       <str name="echoParams">explicit</str>
+	   <str name="json.nl">map</str>
+       <!-- 
+       <int name="rows">10</int>
+       <str name="fl">*</str>
+       <str name="version">2.1</str>
+        -->
+     </lst>
+  </requestHandler>
+
+  <!-- DisMaxRequestHandler allows easy searching across multiple fields
+       for simple user-entered phrases. 
+       see http://wiki.apache.org/solr/DisMaxRequestHandler
+   -->
+  <requestHandler name="dismax" class="solr.DisMaxRequestHandler" >
+    <lst name="defaults">
+     <str name="echoParams">explicit</str>
+     <float name="tie">0.01</float>
+     <str name="qf">
+        text^0.5 features^1.0 name^1.2 sku^1.5 id^10.0 manu^1.1 cat^1.4
+     </str>
+     <str name="pf">
+        text^0.2 features^1.1 name^1.5 manu^1.4 manu_exact^1.9
+     </str>
+     <str name="bf">
+        ord(poplarity)^0.5 recip(rord(price),1,1000,1000)^0.3
+     </str>
+     <str name="fl">
+        id,name,price,score
+     </str>
+     <str name="mm">
+        2&lt;-1 5&lt;-2 6&lt;90%
+     </str>
+     <int name="ps">100</int>
+     <str name="q.alt">*:*</str>
+    </lst>
+  </requestHandler>
+
+  <!-- Note how you can register the same handler multiple times with
+       different names (and different init parameters)
+    -->
+  <requestHandler name="partitioned" class="solr.DisMaxRequestHandler" >
+    <lst name="defaults">
+     <str name="echoParams">explicit</str>
+     <str name="qf">text^0.5 features^1.0 name^1.2 sku^1.5 id^10.0</str>
+     <str name="mm">2&lt;-1 5&lt;-2 6&lt;90%</str>
+     <!-- This is an example of using Date Math to specify a constantly
+          moving date range in a config...
+       -->
+     <str name="bq">incubationdate_dt:[* TO NOW/DAY-1MONTH]^2.2</str>
+    </lst>
+    <!-- In addition to defaults, "appends" params can be specified
+         to identify values which should be appended to the list of
+         multi-val params from the query (or the existing "defaults").
+
+         In this example, the param "fq=instock:true" will be appended to
+         any query time fq params the user may specify, as a mechanism for
+         partitioning the index, independent of any user selected filtering
+         that may also be desired (perhaps as a result of faceted searching).
+
+         NOTE: there is *absolutely* nothing a client can do to prevent these
+         "appends" values from being used, so don't use this mechanism
+         unless you are sure you always want it.
+      -->
+    <lst name="appends">
+      <str name="fq">inStock:true</str>
+    </lst>
+    <!-- "invariants" are a way of letting the Solr maintainer lock down
+         the options available to Solr clients.  Any params values
+         specified here are used regardless of what values may be specified
+         in either the query, the "defaults", or the "appends" params.
+
+         In this example, the facet.field and facet.query params are fixed,
+         limiting the facets clients can use.  Faceting is not turned on by
+         default - but if the client does specify facet=true in the request,
+         these are the only facets they will be able to see counts for;
+         regardless of what other facet.field or facet.query params they
+         may specify.
+
+         NOTE: there is *absolutely* nothing a client can do to prevent these
+         "invariants" values from being used, so don't use this mechanism
+         unless you are sure you always want it.
+      -->
+    <lst name="invariants">
+      <str name="facet.field">cat</str>
+      <str name="facet.field">manu_exact</str>
+      <str name="facet.query">price:[* TO 500]</str>
+      <str name="facet.query">price:[500 TO *]</str>
+    </lst>
+  </requestHandler>
+  
+  <requestHandler name="instock" class="solr.DisMaxRequestHandler" >
+    <!-- for legacy reasons, DisMaxRequestHandler will assume all init
+         params are "defaults" if you don't explicitly specify any defaults.
+      -->
+     <str name="fq">
+        inStock:true
+     </str>
+     <str name="qf">
+        text^0.5 features^1.0 name^1.2 sku^1.5 id^10.0 manu^1.1 cat^1.4
+     </str>
+     <str name="mm">
+        2&lt;-1 5&lt;-2 6&lt;90%
+     </str>
+  </requestHandler>
+
+
+  <!-- SpellCheckerRequestHandler takes in a word (or several words) as the
+       value of the "q" parameter and returns a list of alternative spelling
+       suggestions.  If invoked with a ...&cmd=rebuild, it will rebuild the
+       spellchecker index.
+  -->
+  <requestHandler name="spellchecker" class="solr.SpellCheckerRequestHandler" startup="lazy">
+    <!-- default values for query parameters -->
+     <lst name="defaults">
+       <int name="suggestionCount">1</int>
+       <float name="accuracy">0.5</float>
+     </lst>
+     
+     <!-- Main init params for handler -->
+     
+     <!-- The directory where your SpellChecker Index should live.   -->
+     <!-- May be absolute, or relative to the Solr "dataDir" directory. -->
+     <!-- If this option is not specified, a RAM directory will be used -->
+     <str name="spellcheckerIndexDir">spell</str>
+     
+     <!-- the field in your schema that you want to be able to build -->
+     <!-- your spell index on. This should be a field that uses a very -->
+     <!-- simple FieldType without a lot of Analysis (ie: string) -->
+     <str name="termSourceField">word</str>
+     
+   </requestHandler>
+
+  
+  <!-- Update request handler.  
+  
+       Note: Since solr1.1 requestHandlers requires a valid content type header if posted in 
+       the body. For example, curl now requires: -H 'Content-type:text/xml; charset=utf-8'
+       The response format differs from solr1.1 formatting and returns a standard error code.
+       
+       To enable solr1.1 behavior, remove the /update handler or change its path
+    -->
+  <requestHandler name="/update" class="solr.XmlUpdateRequestHandler" />
+
+  <!-- CSV update handler, loaded on demand -->
+  <requestHandler name="/update/csv" class="solr.CSVRequestHandler" startup="lazy" />
+
+
+  <!-- Admin Handlers.  TODO? There could be a single handler that loads them all... -->
+  <requestHandler name="/admin/luke"       class="org.apache.solr.handler.admin.LukeRequestHandler" />
+  <requestHandler name="/admin/system"     class="org.apache.solr.handler.admin.SystemInfoHandler" />
+  <requestHandler name="/admin/plugins"    class="org.apache.solr.handler.admin.PluginInfoHandler" />
+  <requestHandler name="/admin/threads"    class="org.apache.solr.handler.admin.ThreadDumpHandler" />
+  <requestHandler name="/admin/properties" class="org.apache.solr.handler.admin.PropertiesRequestHandler" />
+  
+  <!-- Echo the request contents back to the client -->
+  <requestHandler name="/debug/dump" class="solr.DumpRequestHandler" >
+    <lst name="defaults">
+     <str name="echoParams">explicit</str> <!-- for all params (including the default etc) use: 'all' -->
+     <str name="echoHandler">true</str>
+    </lst>
+  </requestHandler>
+  
+  <!-- queryResponseWriter plugins... query responses will be written using the
+    writer specified by the 'wt' request parameter matching the name of a registered
+    writer.
+    The "standard" writer is the default and will be used if 'wt' is not specified 
+    in the request. XMLResponseWriter will be used if nothing is specified here.
+    The json, python, and ruby writers are also available by default.
+
+    <queryResponseWriter name="standard" class="org.apache.solr.request.XMLResponseWriter"/>
+    <queryResponseWriter name="json" class="org.apache.solr.request.JSONResponseWriter"/>
+    <queryResponseWriter name="python" class="org.apache.solr.request.PythonResponseWriter"/>
+    <queryResponseWriter name="ruby" class="org.apache.solr.request.RubyResponseWriter"/>
+
+    <queryResponseWriter name="custom" class="com.example.MyResponseWriter"/>
+  -->
+
+  <!-- XSLT response writer transforms the XML output by any xslt file found
+       in Solr's conf/xslt directory.  Changes to xslt files are checked for
+       every xsltCacheLifetimeSeconds.  
+   -->
+  <queryResponseWriter name="xslt" class="org.apache.solr.request.XSLTResponseWriter">
+    <int name="xsltCacheLifetimeSeconds">5</int>
+  </queryResponseWriter> 
+    
+  <!-- config for the admin interface --> 
+  <admin>
+    <defaultQuery>solr</defaultQuery>
+    <gettableFiles>solrconfig.xml schema.xml admin-extra.html</gettableFiles>
+    <!-- pingQuery should be "URLish" ...
+         &amp; separated key=val pairs ... but there shouldn't be any
+         URL escaping of the values -->
+    <pingQuery>
+     qt=standard&amp;q=solrpingquery
+    </pingQuery>
+    <!-- configure a healthcheck file for servers behind a loadbalancer
+    <healthcheck type="file">server-enabled</healthcheck>
+    -->
+  </admin>
+
+</config>