omniauth-sberbank 1.0.4

data/examples/blog/config/environment.rb

@@ -0,0 +1,5 @@
+# Load the Rails application.
+require_relative 'application'
+
+# Initialize the Rails application.
+Rails.application.initialize!

data/examples/blog/config/environments/development.rb

@@ -0,0 +1,54 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # In the development environment your application's code is reloaded on
+  # every request. This slows down response time but is perfect for development
+  # since you don't have to restart the web server when you make code changes.
+  config.cache_classes = false
+
+  # Do not eager load code on boot.
+  config.eager_load = false
+
+  # Show full error reports.
+  config.consider_all_requests_local = true
+
+  # Enable/disable caching. By default caching is disabled.
+  if Rails.root.join('tmp/caching-dev.txt').exist?
+    config.action_controller.perform_caching = true
+
+    config.cache_store = :memory_store
+    config.public_file_server.headers = {
+      'Cache-Control' => "public, max-age=#{2.days.seconds.to_i}"
+    }
+  else
+    config.action_controller.perform_caching = false
+
+    config.cache_store = :null_store
+  end
+
+  # Don't care if the mailer can't send.
+  config.action_mailer.raise_delivery_errors = false
+
+  config.action_mailer.perform_caching = false
+
+  # Print deprecation notices to the Rails logger.
+  config.active_support.deprecation = :log
+
+  # Raise an error on page load if there are pending migrations.
+  config.active_record.migration_error = :page_load
+
+  # Debug mode disables concatenation and preprocessing of assets.
+  # This option may cause significant delays in view rendering with a large
+  # number of complex assets.
+  config.assets.debug = true
+
+  # Suppress logger output for asset requests.
+  config.assets.quiet = true
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+
+  # Use an evented file watcher to asynchronously detect changes in source code,
+  # routes, locales, etc. This feature depends on the listen gem.
+  config.file_watcher = ActiveSupport::EventedFileUpdateChecker
+end

data/examples/blog/config/environments/production.rb

@@ -0,0 +1,91 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Code is not reloaded between requests.
+  config.cache_classes = true
+
+  # Eager load code on boot. This eager loads most of Rails and
+  # your application in memory, allowing both threaded web servers
+  # and those relying on copy on write to perform better.
+  # Rake tasks automatically ignore this option for performance.
+  config.eager_load = true
+
+  # Full error reports are disabled and caching is turned on.
+  config.consider_all_requests_local       = false
+  config.action_controller.perform_caching = true
+
+  # Attempt to read encrypted secrets from `config/secrets.yml.enc`.
+  # Requires an encryption key in `ENV["RAILS_MASTER_KEY"]` or
+  # `config/secrets.yml.key`.
+  config.read_encrypted_secrets = true
+
+  # Disable serving static files from the `/public` folder by default since
+  # Apache or NGINX already handles this.
+  config.public_file_server.enabled = ENV['RAILS_SERVE_STATIC_FILES'].present?
+
+  # Compress JavaScripts and CSS.
+  config.assets.js_compressor = :uglifier
+  # config.assets.css_compressor = :sass
+
+  # Do not fallback to assets pipeline if a precompiled asset is missed.
+  config.assets.compile = false
+
+  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
+
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.action_controller.asset_host = 'http://assets.example.com'
+
+  # Specifies the header that your server uses for sending files.
+  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
+
+  # Mount Action Cable outside main process or domain
+  # config.action_cable.mount_path = nil
+  # config.action_cable.url = 'wss://example.com/cable'
+  # config.action_cable.allowed_request_origins = [ 'http://example.com', /http:\/\/example.*/ ]
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  # config.force_ssl = true
+
+  # Use the lowest log level to ensure availability of diagnostic information
+  # when problems arise.
+  config.log_level = :debug
+
+  # Prepend all log lines with the following tags.
+  config.log_tags = [ :request_id ]
+
+  # Use a different cache store in production.
+  # config.cache_store = :mem_cache_store
+
+  # Use a real queuing backend for Active Job (and separate queues per environment)
+  # config.active_job.queue_adapter     = :resque
+  # config.active_job.queue_name_prefix = "blog_#{Rails.env}"
+  config.action_mailer.perform_caching = false
+
+  # Ignore bad email addresses and do not raise email delivery errors.
+  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
+  # config.action_mailer.raise_delivery_errors = false
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation cannot be found).
+  config.i18n.fallbacks = true
+
+  # Send deprecation notices to registered listeners.
+  config.active_support.deprecation = :notify
+
+  # Use default logging formatter so that PID and timestamp are not suppressed.
+  config.log_formatter = ::Logger::Formatter.new
+
+  # Use a different logger for distributed setups.
+  # require 'syslog/logger'
+  # config.logger = ActiveSupport::TaggedLogging.new(Syslog::Logger.new 'app-name')
+
+  if ENV["RAILS_LOG_TO_STDOUT"].present?
+    logger           = ActiveSupport::Logger.new(STDOUT)
+    logger.formatter = config.log_formatter
+    config.logger    = ActiveSupport::TaggedLogging.new(logger)
+  end
+
+  # Do not dump schema after migrations.
+  config.active_record.dump_schema_after_migration = false
+end

data/examples/blog/config/environments/test.rb

@@ -0,0 +1,42 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # The test environment is used exclusively to run your application's
+  # test suite. You never need to work with it otherwise. Remember that
+  # your test database is "scratch space" for the test suite and is wiped
+  # and recreated between test runs. Don't rely on the data there!
+  config.cache_classes = true
+
+  # Do not eager load code on boot. This avoids loading your whole application
+  # just for the purpose of running a single test. If you are using a tool that
+  # preloads Rails for running tests, you may have to set it to true.
+  config.eager_load = false
+
+  # Configure public file server for tests with Cache-Control for performance.
+  config.public_file_server.enabled = true
+  config.public_file_server.headers = {
+    'Cache-Control' => "public, max-age=#{1.hour.seconds.to_i}"
+  }
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Raise exceptions instead of rendering exception templates.
+  config.action_dispatch.show_exceptions = false
+
+  # Disable request forgery protection in test environment.
+  config.action_controller.allow_forgery_protection = false
+  config.action_mailer.perform_caching = false
+
+  # Tell Action Mailer not to deliver emails to the real world.
+  # The :test delivery method accumulates sent emails in the
+  # ActionMailer::Base.deliveries array.
+  config.action_mailer.delivery_method = :test
+
+  # Print deprecation notices to the stderr.
+  config.active_support.deprecation = :stderr
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+end

data/examples/blog/config/initializers/application_controller_renderer.rb

@@ -0,0 +1,6 @@
+# Be sure to restart your server when you modify this file.
+
+# ApplicationController.renderer.defaults.merge!(
+#   http_host: 'example.org',
+#   https: false
+# )

data/examples/blog/config/initializers/assets.rb

@@ -0,0 +1,14 @@
+# Be sure to restart your server when you modify this file.
+
+# Version of your assets, change this if you want to expire all your assets.
+Rails.application.config.assets.version = '1.0'
+
+# Add additional assets to the asset load path.
+# Rails.application.config.assets.paths << Emoji.images_path
+# Add Yarn node_modules folder to the asset load path.
+Rails.application.config.assets.paths << Rails.root.join('node_modules')
+
+# Precompile additional assets.
+# application.js, application.css, and all non-JS/CSS in the app/assets
+# folder are already added.
+# Rails.application.config.assets.precompile += %w( admin.js admin.css )

data/examples/blog/config/initializers/backtrace_silencers.rb

@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
+# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
+
+# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
+# Rails.backtrace_cleaner.remove_silencers!

data/examples/blog/config/initializers/cookies_serializer.rb

@@ -0,0 +1,5 @@
+# Be sure to restart your server when you modify this file.
+
+# Specify a serializer for the signed and encrypted cookie jars.
+# Valid options are :json, :marshal, and :hybrid.
+Rails.application.config.action_dispatch.cookies_serializer = :json

data/examples/blog/config/initializers/filter_parameter_logging.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Configure sensitive parameters which will be filtered from the log file.
+Rails.application.config.filter_parameters += [:password]

data/examples/blog/config/initializers/inflections.rb

@@ -0,0 +1,16 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new inflection rules using the following format. Inflections
+# are locale specific, and you may define rules for as many different
+# locales as you wish. All of these examples are active by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.plural /^(ox)$/i, '\1en'
+#   inflect.singular /^(ox)en/i, '\1'
+#   inflect.irregular 'person', 'people'
+#   inflect.uncountable %w( fish sheep )
+# end
+
+# These inflection rules are supported but not enabled by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.acronym 'RESTful'
+# end

data/examples/blog/config/initializers/mime_types.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new mime types for use in respond_to blocks:
+# Mime::Type.register "text/richtext", :rtf

data/examples/blog/config/initializers/omniauth.rb

@@ -0,0 +1,33 @@
+# frozen_string_literal: true
+require 'pry'
+
+OmniAuth.config.logger = Rails.logger
+OmniAuth.config.add_camelization 'mailru', 'MailRu'
+
+Rails.application.config.middleware.use OmniAuth::Builder do
+  def p12
+    OpenSSL::PKCS12.new(p12_file.read, 'password')
+  end
+
+  def p12_file
+    File.open('../yourPath/product.ru.p12', 'rb')
+  end
+
+  def client_key
+    p12.key
+  end
+
+  def client_cert
+    p12.certificate
+  end
+
+  provider :sberbank,
+           client_id: '111111111111',
+           client_secret: '111111111111',
+           response_type: 'code',
+           client_type: 'PRIVATE',
+           client_options: { ssl: { client_key: client_key, client_cert: client_cert } },
+           scope: 'openid name email mobile',
+           #  callback_path: '/callback',
+           grant_type: 'client_credentials'
+end

data/examples/blog/config/initializers/wrap_parameters.rb

@@ -0,0 +1,14 @@
+# Be sure to restart your server when you modify this file.
+
+# This file contains settings for ActionController::ParamsWrapper which
+# is enabled by default.
+
+# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
+ActiveSupport.on_load(:action_controller) do
+  wrap_parameters format: [:json]
+end
+
+# To enable root element in JSON for ActiveRecord objects.
+# ActiveSupport.on_load(:active_record) do
+#   self.include_root_in_json = true
+# end

data/examples/blog/config/locales/en.yml

@@ -0,0 +1,33 @@
+# Files in the config/locales directory are used for internationalization
+# and are automatically loaded by Rails. If you want to use locales other
+# than English, add the necessary files in this directory.
+#
+# To use the locales, use `I18n.t`:
+#
+#     I18n.t 'hello'
+#
+# In views, this is aliased to just `t`:
+#
+#     <%= t('hello') %>
+#
+# To use a different locale, set it with `I18n.locale`:
+#
+#     I18n.locale = :es
+#
+# This would use the information in config/locales/es.yml.
+#
+# The following keys must be escaped otherwise they will not be retrieved by
+# the default I18n backend:
+#
+# true, false, on, off, yes, no
+#
+# Instead, surround them with single quotes.
+#
+# en:
+#   'true': 'foo'
+#
+# To learn more, please read the Rails Internationalization guide
+# available at http://guides.rubyonrails.org/i18n.html.
+
+en:
+  hello: "Hello world"

data/examples/blog/config/puma.rb

@@ -0,0 +1,56 @@
+# Puma can serve each request in a thread from an internal thread pool.
+# The `threads` method setting takes two numbers: a minimum and maximum.
+# Any libraries that use thread pools should be configured to match
+# the maximum value specified for Puma. Default is set to 5 threads for minimum
+# and maximum; this matches the default thread size of Active Record.
+#
+threads_count = ENV.fetch("RAILS_MAX_THREADS") { 5 }
+threads threads_count, threads_count
+
+# Specifies the `port` that Puma will listen on to receive requests; default is 3000.
+#
+port        ENV.fetch("PORT") { 3000 }
+
+# Specifies the `environment` that Puma will run in.
+#
+environment ENV.fetch("RAILS_ENV") { "development" }
+
+# Specifies the number of `workers` to boot in clustered mode.
+# Workers are forked webserver processes. If using threads and workers together
+# the concurrency of the application would be max `threads` * `workers`.
+# Workers do not work on JRuby or Windows (both of which do not support
+# processes).
+#
+# workers ENV.fetch("WEB_CONCURRENCY") { 2 }
+
+# Use the `preload_app!` method when specifying a `workers` number.
+# This directive tells Puma to first boot the application and load code
+# before forking the application. This takes advantage of Copy On Write
+# process behavior so workers use less memory. If you use this option
+# you need to make sure to reconnect any threads in the `on_worker_boot`
+# block.
+#
+# preload_app!
+
+# If you are preloading your application and using Active Record, it's
+# recommended that you close any connections to the database before workers
+# are forked to prevent connection leakage.
+#
+# before_fork do
+#   ActiveRecord::Base.connection_pool.disconnect! if defined?(ActiveRecord)
+# end
+
+# The code in the `on_worker_boot` will be called if you are using
+# clustered mode by specifying a number of `workers`. After each worker
+# process is booted, this block will be run. If you are using the `preload_app!`
+# option, you will want to use this block to reconnect to any threads
+# or connections that may have been created at application boot, as Ruby
+# cannot share connections between processes.
+#
+# on_worker_boot do
+#   ActiveRecord::Base.establish_connection if defined?(ActiveRecord)
+# end
+#
+
+# Allow puma to be restarted by `rails restart` command.
+plugin :tmp_restart

data/examples/blog/config/routes.rb

@@ -0,0 +1,14 @@
+Rails.application.routes.draw do
+  # get 'session/create'
+
+  get 'welcome/index'
+  root 'welcome#index'
+  # For details on the DSL available within this file, see http://guides.rubyonrails.org/routing.html
+  post '/auth/vkontakte/callback', to: 'sessions#create'
+  get '/auth/vkontakte/callback', to: 'sessions#create'
+  post '/auth/sberbank/callback', to: 'sessions#create'
+  get '/auth/sberbank/callback', to: 'sessions#create'
+  get '/check_connection', to: 'sessions#sendiboba'
+  post '/check_connection', to: 'sessions#sendiboba'
+  get '/auth/:provider/callback', to: 'sessions#auth_hash'
+end

data/examples/blog/config/secrets.yml

@@ -0,0 +1,63 @@
+# Be sure to restart your server when you modify this file.
+
+# Your secret key is used for verifying the integrity of signed cookies.
+# If you change this key, all old signed cookies will become invalid!
+
+# Make sure the secret is at least 30 characters and all random,
+# no regular words or you'll be exposed to dictionary attacks.
+# You can use `rails secret` to generate a secure secret key.
+
+# Make sure the secrets in this file are kept private
+# if you're sharing your code publicly.
+
+# Shared secrets are available across all environments.
+
+# shared:
+#   api_key: a1B2c3D4e5F6
+
+# Environmental secrets are only available for that specific environment.
+defaults: &defaults
+  omniauth_openhub:
+    google:
+      client_id: '506873984206-19ctlcmtb86s7dottvvg8d8p2m4380jv.apps.googleusercontent.com'
+      client_secret: 'r4chE5rpJ6tVHKf4bvyplG7z'
+    vkontakte:
+      client_id: '6622633'
+      client_secret: 'H3PenPzIKjrdCEM3RnWy'
+    facebook:
+      client_id: '199756737401267'
+      client_secret: 'edfc06590446c4e9e45d510014d6151d'
+
+development:
+  secret_key_base: 24e40d7e924b1e9ff0b376a21464c376fa9925c400c93c07a6790288e32d349ef04a9c716abdb22316649f4c454598f75078823f821c4570ff4f9a44e8e2ded1
+  omniauth_openhub:
+    google:
+      client_id: '506873984206-19ctlcmtb86s7dottvvg8d8p2m4380jv.apps.googleusercontent.com'
+      client_secret: 'r4chE5rpJ6tVHKf4bvyplG7z'
+    vkontakte:
+      client_id: '6622633'
+      client_secret: 'H3PenPzIKjrdCEM3RnWy'
+    facebook:
+      client_id: '199756737401267'
+      client_secret: 'edfc06590446c4e9e45d510014d6151d'
+
+test:
+  secret_key_base: b1bec2e6e01f7050b61239aed88fd786d7f83e946f8711091da0b12622f1090c41829d54e1ed3eddc1a7217a0793902e6ccc7004c2de79dc3aef78090137a3d3
+
+# Do not keep production secrets in the unencrypted secrets file.
+# Instead, either read values from the environment.
+# Or, use `bin/rails secrets:setup` to configure encrypted secrets
+# and move the `production:` environment over there.
+
+production:
+  secret_key_base: <%= ENV["SECRET_KEY_BASE"] %>
+  omniauth_openhub:
+    google:
+      client_id: '506873984206-19ctlcmtb86s7dottvvg8d8p2m4380jv.apps.googleusercontent.com'
+      client_secret: 'r4chE5rpJ6tVHKf4bvyplG7z'
+    vkontakte:
+      client_id: '6622633'
+      client_secret: 'H3PenPzIKjrdCEM3RnWy'
+    facebook:
+      client_id: '199756737401267'
+      client_secret: 'edfc06590446c4e9e45d510014d6151d'