network-infra-utility 0.2.0 → 0.5.0

data/support/basic/as_num.rb

@@ -0,0 +1,221 @@
+# coding: utf-8
+# frozen_string_literal: true
+
+=begin
+<< 16位AS号（2字节，传统）>>
+
+| 类型        | 范围                | 说明                          |
+| --------- | ----------------- | --------------------------- |
+| **公有AS号** | **1 – 64511**     | 全球互联网可路由，需向RIR（区域互联网注册机构）申请 |
+| **私有AS号** | **64512 – 65534** | 仅用于内部网络，不可通告到公网             |
+| **保留**    | 0, 23456, 65535   | AS 0 保留、AS_TRANS、文档保留       |
+
+<< 32位AS号（4字节，RFC 4893/6793）>>
+
+| 类型        | 范围                                | 说明            |
+| --------- | --------------------------------- | ------------- |
+| **公有AS号** | **65536 – 4,199,999,999**         | 全球可路由（约42亿个）  |
+| **私有AS号** | **4,200,000,000 – 4,294,967,294** | 内部使用（约9500万个） |
+| **保留**    | 4,294,967,295                     | 保留（相当于32位全1）  |
+
+<< 两种记法 >>
+
+| 记法        | 示例           | 说明                         |
+| --------- | ------------ | -------------------------- |
+| **asplain** | `4259840001` | 纯十进制整数，32 位 AS 常用此记法       |
+| **asdot**   | `1.10`       | 高16位.低16位，两段各 0 – 65535    |
+
+转换关系：plain = high * 65536 + low；asdot = "high.low"
+例：1.10 → 65546；65546 → "1.10"
+=end
+
+# AS 号工具。
+#
+# 用法：
+#   as = ASNum.new("1.10")        # asdot 记法
+#   ASNum.new("65546")            # asplain 记法
+#   ASNum.new(65546)              # Integer 记法
+#
+#   as.to_i         # → 65546
+#   as.to_plain     # → "65546"
+#   as.to_dot       # → "1.10"
+#   as.to_s         # → "1.10"（asdot 优先）或 "65546"（16位时纯数字）
+#
+#   as.public?      # → true / false
+#   as.private?     # → true / false
+#   as.reserved?    # → true / false
+#   as.type         # → :public / :private / :reserved
+#
+#   as.as2?         # → 是否落在 16 位传统范围 (0 – 65535)
+#   as.as4?         # → 是否为 32 位扩展号 (≥ 65536)
+#
+#   ASNum === ASNum # → Comparable 排序
+
+class ASNum
+  include Comparable
+
+  attr_reader :number, :high, :low
+
+  # AS 号范围常量
+  AS2_MAX       = 65535
+  AS4_MAX       = 4_294_967_295
+  # 16 位
+  PUB_16_MIN    = 1
+  PUB_16_MAX    = 64_511
+  PRIV_16_MIN   = 64_512
+  PRIV_16_MAX   = 65_534
+  # 32 位
+  PUB_32_MIN    = 65_536
+  PUB_32_MAX    = 4_199_999_999
+  PRIV_32_MIN   = 4_200_000_000
+  PRIV_32_MAX   = 4_294_967_294
+  # 特殊保留
+  RESERVED_16   = [0, 23_456, 65_535].freeze
+  RESERVED_32   = 4_294_967_295
+
+  # 从 String（asplain 或 asdot）或 Integer 构造。
+  #
+  # asplain 示例："65546" / 65546
+  # asdot   示例："1.10"（高16位.低16位）
+  def initialize(arg)
+    @number = parse(arg)
+    @high   = @number >> 16
+    @low    = @number & 0xFFFF
+    raise ArgumentError, "AS number out of range: #{arg}" unless valid_range?
+  end
+
+  # ---- 格式输出 ----
+
+  # 十进制整数。
+  def to_i
+    @number
+  end
+
+  # asplain 字符串（纯十进制）。
+  def to_plain
+    @number.to_s
+  end
+
+  # asdot 字符串（高16位.低16位）。16 位范围内无点。
+  def to_dot
+    @number <= AS2_MAX ? @number.to_s : "#{@high}.#{@low}"
+  end
+
+  # 默认字符串：asdot 优先（16 位时回退为纯数字）。
+  def to_s
+    to_dot
+  end
+
+  alias inspect to_dot
+
+  # ---- 类型判定 ----
+
+  # 公有 AS 号。先排除保留号，再查范围，避免 AS_TRANS(23456) 同时命中。
+  def public?
+    !reserved? &&
+      ((PUB_16_MIN..PUB_16_MAX).include?(@number) ||
+       (PUB_32_MIN..PUB_32_MAX).include?(@number))
+  end
+
+  def private?
+    !reserved? &&
+      ((PRIV_16_MIN..PRIV_16_MAX).include?(@number) ||
+       (PRIV_32_MIN..PRIV_32_MAX).include?(@number))
+  end
+
+  def reserved?
+    RESERVED_16.include?(@number) || @number == RESERVED_32
+  end
+
+  # 一次性返回类型符号。
+  def type
+    return :public   if public?
+    return :private  if private?
+    return :reserved if reserved?
+    :unknown
+  end
+
+  # ---- 位宽判定 ----
+
+  # 是否为 16 位传统 AS 号（0 – 65535）。
+  def as2?
+    @number <= AS2_MAX
+  end
+
+  # 是否为 32 位扩展 AS 号（≥ 65536）。
+  def as4?
+    @number > AS2_MAX
+  end
+
+  # ---- 保留别名，兼容原接口 ----
+
+  alias is_public_as?   public?
+  alias is_private_as?  private?
+  alias is_reserved_as? reserved?
+
+  # ---- Comparable ----
+
+  def <=>(other)
+    @number <=> other.number
+  end
+
+  # hash 与 eql? 使 ASNum 可作 Hash key
+  def hash
+    @number.hash
+  end
+
+  def eql?(other)
+    other.is_a?(ASNum) && @number == other.number
+  end
+
+  private
+
+  # 解析输入为 32 位整数。
+  def parse(arg)
+    case arg
+    when Integer
+      arg
+    when String
+      parse_string(arg)
+    else
+      raise ArgumentError, "Cannot parse AS number from #{arg.class}"
+    end
+  end
+
+  # 解析字符串：支持 asplain 和 asdot 两种记法。
+  def parse_string(str)
+    str = str.strip
+    if str.include?(".")
+      parse_asdot(str)
+    else
+      parse_asplain(str)
+    end
+  end
+
+  # asplain：纯十进制整数串
+  def parse_asplain(str)
+    unless str.match?(/\A\d+\z/)
+      raise ArgumentError, "Invalid AS number: #{str}"
+    end
+    str.to_i
+  end
+
+  # asdot：高16位.低16位，两段各 0 – 65535
+  def parse_asdot(str)
+    unless str.match?(/\A\d+\.\d+\z/)
+      raise ArgumentError, "Invalid AS number: #{str}"
+    end
+    high, low = str.split(".")
+    high_int = high.to_i
+    low_int  = low.to_i
+    unless (0..AS2_MAX).include?(high_int) && (0..AS2_MAX).include?(low_int)
+      raise ArgumentError, "AS dot segment out of range (0-65535): #{str}"
+    end
+    high_int * 65536 + low_int
+  end
+
+  # 校验数值在 0 – 2^32-1 内
+  def valid_range?
+    (0..AS4_MAX).include?(@number)
+  end
+end

data/support/basic/mac_address.rb

@@ -0,0 +1,281 @@
+# coding: utf-8
+# frozen_string_literal: true
+
+=begin # MD
+<< MAC 地址格式 >>
+
+| 分隔符 | 分组数 | 示例                     | 说明            |
+| ----- | ----- | ----------------------- | --------------- |
+| -     | 6     | 00-1A-2B-3C-4D-5E       | Windows 常用    |
+| :     | 6     | 00:1A:2B:3C:4D:5E       | Linux/Cisco 常用 |
+| .     | 3     | 001A.2B3C.4D5E          | Cisco 点分格式  |
+| -     | 3     | 001A-2B3C-4D5E          | 部分设备 3 段横杠 |
+| 无    | -     | 001A2B3C4D5E            | 无分隔符        |
+
+<< 特殊位 >>
+
+| 位            | 位置              | 说明                          |
+| ------------- | ----------------- | ----------------------------- |
+| I/G 位        | 首字节 bit0       | 0=单播/个体, 1=组播           |
+| U/L 位        | 首字节 bit1       | 0=全球分配(OUI), 1=本地分配    |
+
+<< EUI-64 >>
+
+MAC 地址 → EUI-64：在 OUI（前3字节）和 NIC（后3字节）之间插入 FF:FE
+例：00-1A-2B-3C-4D-5E → 00:1A:2B:FF:FE:3C:4D:5E
+IPv6 SLAAC 接口标识符需翻转 U/L 位
+=end
+
+# MAC 地址工具。
+#
+# 用法：
+#   mac = MACAddress.new("00:1A:2B:3C:4D:5E")
+#   mac = MAC.address("001A.2B3C.4D5E")
+#   mac = MAC.address("001A-2B3C-4D5E")
+#   mac = MAC.address(0x001A2B3C4D5E)
+#   mac = MAC.address([0x00, 0x1A, 0x2B, 0x3C, 0x4D, 0x5E])
+#
+#   mac.to_s        # → "00-1a-2b-3c-4d-5e"
+#   mac.to_hex(":", 6)  # → "00:1a:2b:3c:4d:5e"
+#   mac.to_hex(".", 3)  # → "001a.2b3c.4d5e"
+#   mac.oui         # → "00-1a-2b"
+#   mac.multicast?  # → false
+#   mac.locally_administered?  # → false
+#   mac.to_eui64_s  # → "00:1a:2b:ff:fe:3c:4d:5e"
+
+class MacAddress
+  include Comparable
+
+  attr_reader :numbers, :number
+
+  MAC_MAX = 0xFFFFFFFFFFFF
+
+  # 从 String（带分隔符或无分隔符）、Array 或 Integer 构造。
+  #
+  # 字符串示例：
+  #   "00-1A-2B-3C-4D-5E"  6 组（- / : 分隔）
+  #   "001A.2B3C.4D5E"     3 组（. 分隔，Cisco 点分格式）
+  #   "001A-2B3C-4D5E"     3 组（- 分隔，部分设备写法）
+  #   "001A2B3C4D5E"       无分隔符
+  #
+  # 数组示例：
+  #   ["00", "1A", "2B", "3C", "4D", "5E"]  6 段字符串
+  #   ["001A", "2B3C", "4D5E"]              3 段字符串
+  #   [0x00, 0x1A, 0x2B, 0x3C, 0x4D, 0x5E]  6 段整数
+  #
+  # 整数示例：
+  #   0x001A2B3C4D5E
+  def initialize(arg)
+    case arg
+    when String
+      sequence = detect_and_split(arg)
+      build_from_sequence(sequence)
+    when Array
+      build_from_sequence(arg)
+    when Integer
+      raise ArgumentError, "MAC out of range: #{arg}" unless (0..MAC_MAX).include?(arg)
+      @number = arg
+      @numbers = (0..5).map { |i| (arg >> ((5 - i) * 8)) & 0xFF }
+    else
+      raise ArgumentError, "Cannot parse MAC from #{arg.class}"
+    end
+  end
+
+  # ---- 输出格式 ----
+
+  def to_a
+    @numbers
+  end
+
+  # 带分隔符的十六进制串。groups 控制分组（6/3/2/1），separator 控制分隔符。
+  #   to_hex("-", 6) → "00-1a-2b-3c-4d-5e"
+  #   to_hex(":", 6) → "00:1a:2b:3c:4d:5e"
+  #   to_hex(".", 3) → "001a.2b3c.4d5e"
+  #   to_hex("", 1)  → "001a2b3c4d5e"
+  def to_hex(separator = "-", groups = 6)
+    unless [1, 2, 3, 6].include?(groups)
+      raise ArgumentError, "Invalid groups: #{groups} (must be 1, 2, 3, or 6)"
+    end
+    slice_size = 6 / groups
+    @numbers.each_slice(slice_size).map do |slice|
+      slice.map { |n| "%02x" % n }.join
+    end.join(separator)
+  end
+
+  def to_s
+    to_hex("-", 6)
+  end
+
+  alias inspect to_s
+
+  def to_upcase(separator = "-", groups = 6)
+    to_hex(separator, groups).upcase
+  end
+
+  def to_downcase(separator = "-", groups = 6)
+    to_hex(separator, groups).downcase
+  end
+
+  # ---- 属性判定 ----
+
+  # I/G 位：首字节 bit0。0=单播，1=组播。
+  def multicast?
+    @numbers[0] & 0x01 != 0
+  end
+
+  alias group? multicast?
+
+  # U/L 位：首字节 bit1。1=本地分配，0=全球分配（OUI）。
+  def locally_administered?
+    @numbers[0] & 0x02 != 0
+  end
+
+  def universally_administered?
+    !locally_administered?
+  end
+
+  # 全 1 广播地址。
+  def broadcast?
+    @number == MAC_MAX
+  end
+
+  # 全 0 空地址。
+  def zero?
+    @number == 0
+  end
+
+  # OUI：前 3 字节组织唯一标识符。
+  def oui
+    @numbers[0..2].map { |n| "%02x" % n }.join("-")
+  end
+
+  # NIC：后 3 字节网卡标识。
+  def nic
+    @numbers[3..5].map { |n| "%02x" % n }.join("-")
+  end
+
+  # ---- EUI-64 / IPv6 SLAAC ----
+
+  # 转为 EUI-64 标识符（OUI 和 NIC 之间插入 FF:FE），返回 8 字节整数数组。
+  #   MacAddress.new("00-1A-2B-3C-4D-5E").to_eui64
+  #   → [0x00, 0x1A, 0x2B, 0xFF, 0xFE, 0x3C, 0x4D, 0x5E]
+  def to_eui64
+    @numbers[0..2] + [0xFF, 0xFE] + @numbers[3..5]
+  end
+
+  # EUI-64 格式字符串（默认冒号分隔）。
+  def to_eui64_s(separator = ":")
+    to_eui64.map { |n| "%02x" % n }.join(separator)
+  end
+
+  # 转为 IPv6 SLAAC 接口标识符（EUI-64 且 U/L 位翻转），返回 8 字节整数数组。
+  def to_interface_id
+    eui64 = to_eui64
+    eui64[0] ^= 0x02
+    eui64
+  end
+
+  def to_interface_id_s(separator = ":")
+    to_interface_id.map { |n| "%02x" % n }.join(separator)
+  end
+
+  # ---- Comparable ----
+
+  def <=>(other)
+    @number <=> other.number
+  end
+
+  def hash
+    @number.hash
+  end
+
+  def eql?(other)
+    other.is_a?(MacAddress) && @number == other.number
+  end
+
+  # ---- 兼容原接口 ----
+
+  # 原版 writing 方法：groups 控制分组数，splitter 控制分隔符。
+  def writing(groups = 3, splitter = "-")
+    groups = 6 if groups >= 6
+    to_hex(splitter, groups)
+  end
+
+  # ---- 类方法 ----
+
+  # 有效性检查，不抛异常。
+  def self.valid?(arg)
+    new(arg)
+    true
+  rescue ArgumentError
+    false
+  end
+
+  private
+
+  # 从字符串自动检测分隔符并拆分为段数组。
+  def detect_and_split(str)
+    str = str.strip
+    if str.match?(/[:.\-]/)
+      str.split(/[:.\-]/)
+    elsif str.match?(/\A[0-9a-fA-F]{12}\z/)
+      str.scan(/../)
+    else
+      raise ArgumentError, "Invalid MAC format: #{str}"
+    end
+  end
+
+  # 从段数组构建 @numbers（固定 6 字节整数）和 @number。
+  # 支持 3 段（每段 2 字节）和 6 段（每段 1 字节）。
+  def build_from_sequence(seq)
+    case seq.size
+    when 3
+      @numbers = seq.flat_map { |seg| split_two_byte_segment(seg) }
+    when 6
+      @numbers = seq.map { |seg| parse_segment(seg, 1) }
+    else
+      raise ArgumentError, "MAC segment count error: #{seq.size} (expected 3 or 6)"
+    end
+    compute_number
+  end
+
+  # 解析单段为指定字节数的整数，含范围校验。
+  def parse_segment(seg, bytes)
+    val = if seg.is_a?(String)
+            raise ArgumentError, "Invalid hex segment: #{seg}" unless seg.match?(/\A[0-9a-fA-F]+\z/)
+            seg.to_i(16)
+          else
+            seg.to_i
+          end
+    max = (1 << (bytes * 8)) - 1
+    unless (0..max).include?(val)
+      raise ArgumentError, "MAC segment out of range (0-#{max}): #{seg}"
+    end
+    val
+  end
+
+  # 解析 2 字节段，拆为高/低两个单字节。
+  def split_two_byte_segment(seg)
+    val = parse_segment(seg, 2)
+    [(val >> 8) & 0xFF, val & 0xFF]
+  end
+
+  def compute_number
+    @number = @numbers.map.with_index { |n, i| n << ((5 - i) * 8) }.sum
+  end
+end
+
+# MAC 统一入口模块。
+#
+# 用法：
+#   MAC.address("00:1A:2B:3C:4D:5E")
+#   MAC.address("001A.2B3C.4D5E")
+#   MAC.address(0x001A2B3C4D5E)
+#   MAC.address([0x00, 0x1A, 0x2B, 0x3C, 0x4D, 0x5E])
+module MAC
+  module_function
+
+  def address(arg, _ = "-")
+    MacAddress.new(arg)
+  end
+end

data/version.rb

@@ -1,5 +1,5 @@
 # frozen_string_literal: true
 
 module NetworkInfraUtility
-  VERSION = "0.2.0"
+  VERSION = "0.5.0"
 end

metadata

@@ -1,7 +1,7 @@
 --- !ruby/object:Gem::Specification
 name: network-infra-utility
 version: !ruby/object:Gem::Version
-  version: 0.2.0
+  version: 0.5.0
 platform: ruby
 authors:
 - Matt
@@ -51,12 +51,41 @@ dependencies:
     - - "~>"
       - !ruby/object:Gem::Version
         version: '6.0'
+- !ruby/object:Gem::Dependency
+  name: thor
+  requirement: !ruby/object:Gem::Requirement
+    requirements:
+    - - "~>"
+      - !ruby/object:Gem::Version
+        version: '1.3'
+  type: :runtime
+  prerelease: false
+  version_requirements: !ruby/object:Gem::Requirement
+    requirements:
+    - - "~>"
+      - !ruby/object:Gem::Version
+        version: '1.3'
+- !ruby/object:Gem::Dependency
+  name: json
+  requirement: !ruby/object:Gem::Requirement
+    requirements:
+    - - "~>"
+      - !ruby/object:Gem::Version
+        version: '2.6'
+  type: :runtime
+  prerelease: false
+  version_requirements: !ruby/object:Gem::Requirement
+    requirements:
+    - - "~>"
+      - !ruby/object:Gem::Version
+        version: '2.6'
 description: 这是`gem:network-utility`的AIGC重编码版，提供了基于工具、服务、文档、兼容支持的多种网络应用基础设施。
 email:
 - matthrewchains@gmail.com
 - 18995691365@189.cn
 executables:
 - geo-api
+- geo-doc
 - geo-get
 - geo-load
 extensions: []
@@ -69,23 +98,130 @@ files:
 - CHANGELOG.md
 - CODE_OF_CONDUCT.md
 - Gemfile
+- Gemfile.lock
 - LICENSE.txt
 - README.md
 - Rakefile
 - bin/console
+- bin/dns-query
 - bin/geo-api
+- bin/geo-doc
 - bin/geo-get
 - bin/geo-load
 - bin/setup
+- document/ASNum模块功能说明.md
+- document/DNSQuery工具使用方法.md
+- document/Geo命令工具使用方法.md
+- document/IP模块功能说明.md
+- document/MAC模块功能说明.md
+- document/SSH连接客户端使用方法.md
 - network-infra-utility.gemspec
 - network.rb
 - service/geodb/GeoAPI.md
 - service/geodb/api.rb
 - service/geodb/config.ru
 - service/geodb/geodb.rb
+- service/ssh/README.md
+- service/ssh/bin/ssh-client
+- service/ssh/design/SSH连接客户端功能需求文档.md
+- service/ssh/design/SSH连接客户端详细设计文档.md
+- service/ssh/design/SSH连接客户端软件设计文档.md
+- service/ssh/ext/ssh_core/bin/ssh_core.cmd
+- service/ssh/ext/ssh_core/config/sys.config
+- service/ssh/ext/ssh_core/config/vm.args
+- service/ssh/ext/ssh_core/local_deps/jsx/CHECKSUM
+- service/ssh/ext/ssh_core/local_deps/jsx/LICENSE
+- service/ssh/ext/ssh_core/local_deps/jsx/README.md
+- service/ssh/ext/ssh_core/local_deps/jsx/VERSION
+- service/ssh/ext/ssh_core/local_deps/jsx/contents.tar.gz
+- service/ssh/ext/ssh_core/local_deps/jsx/metadata.config
+- service/ssh/ext/ssh_core/local_deps/jsx/rebar.config
+- service/ssh/ext/ssh_core/local_deps/jsx/rebar.lock
+- service/ssh/ext/ssh_core/local_deps/jsx/src/jsx.app.src
+- service/ssh/ext/ssh_core/local_deps/jsx/src/jsx.erl
+- service/ssh/ext/ssh_core/local_deps/jsx/src/jsx_config.erl
+- service/ssh/ext/ssh_core/local_deps/jsx/src/jsx_config.hrl
+- service/ssh/ext/ssh_core/local_deps/jsx/src/jsx_consult.erl
+- service/ssh/ext/ssh_core/local_deps/jsx/src/jsx_decoder.erl
+- service/ssh/ext/ssh_core/local_deps/jsx/src/jsx_encoder.erl
+- service/ssh/ext/ssh_core/local_deps/jsx/src/jsx_parser.erl
+- service/ssh/ext/ssh_core/local_deps/jsx/src/jsx_to_json.erl
+- service/ssh/ext/ssh_core/local_deps/jsx/src/jsx_to_term.erl
+- service/ssh/ext/ssh_core/local_deps/jsx/src/jsx_verify.erl
+- service/ssh/ext/ssh_core/local_deps/jsx/src/src/jsx.erl
+- service/ssh/ext/ssh_core/local_deps/jsx/src/src/jsx_config.erl
+- service/ssh/ext/ssh_core/local_deps/jsx/src/src/jsx_config.hrl
+- service/ssh/ext/ssh_core/local_deps/jsx/src/src/jsx_consult.erl
+- service/ssh/ext/ssh_core/local_deps/jsx/src/src/jsx_decoder.erl
+- service/ssh/ext/ssh_core/local_deps/jsx/src/src/jsx_encoder.erl
+- service/ssh/ext/ssh_core/local_deps/jsx/src/src/jsx_parser.erl
+- service/ssh/ext/ssh_core/local_deps/jsx/src/src/jsx_to_json.erl
+- service/ssh/ext/ssh_core/local_deps/jsx/src/src/jsx_to_term.erl
+- service/ssh/ext/ssh_core/local_deps/jsx/src/src/jsx_verify.erl
+- service/ssh/ext/ssh_core/rebar.config
+- service/ssh/ext/ssh_core/rebar.lock
+- service/ssh/ext/ssh_core/src/ssh_auth_engine.erl
+- service/ssh/ext/ssh_core/src/ssh_channel_stm.erl
+- service/ssh/ext/ssh_core/src/ssh_codec.erl
+- service/ssh/ext/ssh_core/src/ssh_conn_sup.erl
+- service/ssh/ext/ssh_core/src/ssh_conn_worker.erl
+- service/ssh/ext/ssh_core/src/ssh_core.app.src
+- service/ssh/ext/ssh_core/src/ssh_core_app.erl
+- service/ssh/ext/ssh_core/src/ssh_core_sup.erl
+- service/ssh/ext/ssh_core/src/ssh_infra_sup.erl
+- service/ssh/ext/ssh_core/src/ssh_ipc.hrl
+- service/ssh/ext/ssh_core/src/ssh_ipc_coalesce.erl
+- service/ssh/ext/ssh_core/src/ssh_ipc_gateway.erl
+- service/ssh/ext/ssh_core/src/ssh_ipc_proto.erl
+- service/ssh/ext/ssh_core/src/ssh_jump_chain.erl
+- service/ssh/ext/ssh_core/src/ssh_keepalive_mgr.erl
+- service/ssh/ext/ssh_core/src/ssh_known_hosts_proxy.erl
+- service/ssh/ext/ssh_core/src/ssh_port_fwd.erl
+- service/ssh/ext/ssh_core/src/ssh_sftp_session.erl
+- service/ssh/ext/ssh_core/src/ssh_sftp_sup.erl
+- service/ssh/ext/ssh_core_rs/Cargo.lock
+- service/ssh/ext/ssh_core_rs/Cargo.toml
+- service/ssh/ext/ssh_core_rs/bin/ssh_core_rs
+- service/ssh/ext/ssh_core_rs/bin/ssh_core_rs.cmd
+- service/ssh/ext/ssh_core_rs/src/channel.rs
+- service/ssh/ext/ssh_core_rs/src/coalesce.rs
+- service/ssh/ext/ssh_core_rs/src/codec.rs
+- service/ssh/ext/ssh_core_rs/src/conn.rs
+- service/ssh/ext/ssh_core_rs/src/gateway.rs
+- service/ssh/ext/ssh_core_rs/src/handler.rs
+- service/ssh/ext/ssh_core_rs/src/keepalive.rs
+- service/ssh/ext/ssh_core_rs/src/main.rs
+- service/ssh/ext/ssh_core_rs/src/portfwd.rs
+- service/ssh/ext/ssh_core_rs/src/proto.rs
+- service/ssh/ext/ssh_core_rs/src/sftp.rs
+- service/ssh/lib/network_infra_utility/ssh.rb
+- service/ssh/lib/network_infra_utility/ssh/automation/macro_engine.rb
+- service/ssh/lib/network_infra_utility/ssh/client.rb
+- service/ssh/lib/network_infra_utility/ssh/config/schema.rb
+- service/ssh/lib/network_infra_utility/ssh/config/settings.rb
+- service/ssh/lib/network_infra_utility/ssh/config/store.rb
+- service/ssh/lib/network_infra_utility/ssh/ipc/coalesce.rb
+- service/ssh/lib/network_infra_utility/ssh/ipc/errors.rb
+- service/ssh/lib/network_infra_utility/ssh/ipc/router.rb
+- service/ssh/lib/network_infra_utility/ssh/ipc/transport.rb
+- service/ssh/lib/network_infra_utility/ssh/security/host_key.rb
+- service/ssh/lib/network_infra_utility/ssh/security/vault.rb
+- service/ssh/lib/network_infra_utility/ssh/session/history.rb
+- service/ssh/lib/network_infra_utility/ssh/session/manager.rb
+- service/ssh/lib/network_infra_utility/ssh/session/session.rb
+- service/ssh/lib/network_infra_utility/ssh/session/tree.rb
+- service/ssh/lib/network_infra_utility/ssh/terminal/ansi_parser.rb
+- service/ssh/lib/network_infra_utility/ssh/terminal/buffer.rb
+- service/ssh/lib/network_infra_utility/ssh/terminal/emulator.rb
+- service/ssh/lib/network_infra_utility/ssh/terminal/logger.rb
+- service/ssh/lib/network_infra_utility/ssh/terminal/screen.rb
+- service/ssh/lib/network_infra_utility/ssh/terminal/theme.rb
+- service/ssh/lib/network_infra_utility/ssh/version.rb
+- support/basic/as_num.rb
 - support/basic/ip.rb
 - support/basic/ipv4_address.rb
 - support/basic/ipv6_address.rb
+- support/basic/mac_address.rb
 - version.rb
 homepage: https://github.com/ChenMeng1365/network-infra-utility
 licenses:
@@ -98,6 +234,7 @@ rdoc_options: []
 require_paths:
 - document
 - service
+- service/ssh/lib
 - support
 - tool
 - "."