net-imap 0.4.17 → 0.5.1

data/lib/net/imap/sasl/client_adapter.rb

@@ -1,5 +1,7 @@
 # frozen_string_literal: true
 
+require "forwardable"
+
 module Net
   class IMAP
     module SASL
@@ -8,42 +10,76 @@ module Net
       #
       # TODO: use with more clients, to verify the API can accommodate them.
       #
-      # An abstract base class for implementing a SASL authentication exchange.
-      # Different clients will each have their own adapter subclass, overridden
-      # to match their needs.
+      # Represents the client to a SASL::AuthenticationExchange.  By default,
+      # most methods simply delegate to #client.  Clients should subclass
+      # SASL::ClientAdapter and override methods as needed to match the
+      # semantics of this API to their API.
       #
-      # Although the default implementations _may_ be sufficient, subclasses
-      # will probably need to override some methods.  Additionally, subclasses
-      # may need to include a protocol adapter mixin, if the default
+      # Subclasses should also include a protocol adapter mixin when the default
       # ProtocolAdapters::Generic isn't sufficient.
+      #
+      # === Protocol Requirements
+      #
+      # {RFC4422 §4}[https://www.rfc-editor.org/rfc/rfc4422.html#section-4]
+      # lists requirements for protocol specifications to offer SASL.  Where
+      # possible, ClientAdapter delegates the handling of these requirements to
+      # SASL::ProtocolAdapters.
       class ClientAdapter
+        extend Forwardable
+
         include ProtocolAdapters::Generic
 
-        attr_reader :client, :command_proc
+        # The client that handles communication with the protocol server.
+        #
+        # Most ClientAdapter methods are simply delegated to #client by default.
+        attr_reader :client
 
         # +command_proc+ can used to avoid exposing private methods on #client.
-        # It should run a command with the arguments sent to it, yield each
-        # continuation payload, respond to the server with the result of each
-        # yield, and return the result.  Non-successful results *MUST* raise an
-        # exception.  Exceptions in the block *MUST* cause the command to fail.
+        # It's value is set by the block that is passed to ::new, and it is used
+        # by the default implementation of #run_command.  Subclasses that
+        # override #run_command may use #command_proc for any other purpose they
+        # find useful.
         #
-        # Subclasses that override #run_command may use #command_proc for
-        # other purposes.
+        # In the default implementation of #run_command, command_proc is called
+        # with the protocols authenticate +command+ name, the +mechanism+ name,
+        # an _optional_ +initial_response+ argument, and a +continuations+
+        # block.  command_proc must run the protocol command with the arguments
+        # sent to it, _yield_ the payload of each continuation, respond to the
+        # continuation with the result of each _yield_, and _return_ the
+        # command's successful result.  Non-successful results *MUST* raise
+        # an exception.
+        attr_reader :command_proc
+
+        # By default, this simply sets the #client and #command_proc attributes.
+        # Subclasses may override it, for example: to set the appropriate
+        # command_proc automatically.
         def initialize(client, &command_proc)
           @client, @command_proc = client, command_proc
         end
 
-        # Delegates to AuthenticationExchange.authenticate.
+        # Attempt to authenticate #client to the server.
+        #
+        # By default, this simply delegates to
+        # AuthenticationExchange.authenticate.
         def authenticate(...) AuthenticationExchange.authenticate(self, ...) end
 
-        # Do the protocol and server both support an initial response?
-        def sasl_ir_capable?; client.sasl_ir_capable? end
+        ##
+        # method: sasl_ir_capable?
+        # Do the protocol, server, and client all support an initial response?
+        def_delegator :client, :sasl_ir_capable?
 
-        # Does the server advertise support for the mechanism?
-        def auth_capable?(mechanism); client.auth_capable?(mechanism) end
+        ##
+        # method: auth_capable?
+        # call-seq: auth_capable?(mechanism)
+        #
+        # Does the server advertise support for the +mechanism+?
+        def_delegator :client, :auth_capable?
 
-        # Runs the authenticate command with +mechanism+ and +initial_response+.
-        # When +initial_response+ is nil, an initial response must NOT be sent.
+        # Calls command_proc with +command_name+ (see
+        # SASL::ProtocolAdapters::Generic#command_name),
+        # +mechanism+, +initial_response+, and a +continuations_handler+ block.
+        # The +initial_response+ is optional; when it's nil, it won't be sent to
+        # command_proc.
         #
         # Yields each continuation payload, responds to the server with the
         # result of each yield, and returns the result.  Non-successful results
@@ -51,21 +87,36 @@ module Net
         # command to fail.
         #
         # Subclasses that override this may use #command_proc differently.
-        def run_command(mechanism, initial_response = nil, &block)
+        def run_command(mechanism, initial_response = nil, &continuations_handler)
           command_proc or raise Error, "initialize with block or override"
           args = [command_name, mechanism, initial_response].compact
-          command_proc.call(*args, &block)
+          command_proc.call(*args, &continuations_handler)
         end
 
+        ##
+        # method: host
+        # The hostname to which the client connected.
+        def_delegator :client, :host
+
+        ##
+        # method: port
+        # The destination port to which the client connected.
+        def_delegator :client, :port
+
         # Returns an array of server responses errors raised by run_command.
         # Exceptions in this array won't drop the connection.
         def response_errors; [] end
 
-        # Drop the connection gracefully.
-        def drop_connection;  client.drop_connection end
+        ##
+        # method: drop_connection
+        # Drop the connection gracefully, sending a "LOGOUT" command as needed.
+        def_delegator :client, :drop_connection
+
+        ##
+        # method: drop_connection!
+        # Drop the connection abruptly, closing the socket without logging out.
+        def_delegator :client, :drop_connection!
 
-        # Drop the connection abruptly.
-        def drop_connection!; client.drop_connection! end
       end
     end
   end

data/lib/net/imap/sasl/cram_md5_authenticator.rb

@@ -20,7 +20,7 @@ class Net::IMAP::SASL::CramMD5Authenticator
                  warn_deprecation: true,
                  **)
     if warn_deprecation
-      warn "WARNING: CRAM-MD5 mechanism is deprecated." # TODO: recommend SCRAM
+      warn "WARNING: CRAM-MD5 mechanism is deprecated.", category: :deprecated
     end
     require "digest/md5"
     @user = authcid || username || user

data/lib/net/imap/sasl/digest_md5_authenticator.rb

@@ -1,6 +1,6 @@
 # frozen_string_literal: true
 
-# Net::IMAP authenticator for the "`DIGEST-MD5`" SASL mechanism type, specified
+# Net::IMAP authenticator for the +DIGEST-MD5+ SASL mechanism type, specified
 # in RFC-2831[https://tools.ietf.org/html/rfc2831].  See Net::IMAP#authenticate.
 #
 # == Deprecated
@@ -9,11 +9,32 @@
 # RFC-6331[https://tools.ietf.org/html/rfc6331] and should not be relied on for
 # security.  It is included for compatibility with existing servers.
 class Net::IMAP::SASL::DigestMD5Authenticator
+  DataFormatError    = Net::IMAP::DataFormatError
+  ResponseParseError = Net::IMAP::ResponseParseError
+  private_constant :DataFormatError, :ResponseParseError
+
   STAGE_ONE = :stage_one
   STAGE_TWO = :stage_two
   STAGE_DONE = :stage_done
   private_constant :STAGE_ONE, :STAGE_TWO, :STAGE_DONE
 
+  # Directives which must not have multiples.  The RFC states:
+  # >>>
+  #   This directive may appear at most once; if multiple instances are present,
+  #   the client should abort the authentication exchange.
+  NO_MULTIPLES = %w[nonce stale maxbuf charset algorithm].freeze
+
+  # Required directives which must occur exactly once.  The RFC states: >>>
+  #   This directive is required and MUST appear exactly once; if not present,
+  #   or if multiple instances are present, the client should abort the
+  #   authentication exchange.
+  REQUIRED = %w[nonce algorithm].freeze
+
+  # Directives which are composed of one or more comma delimited tokens
+  QUOTED_LISTABLE = %w[qop cipher].freeze
+
+  private_constant :NO_MULTIPLES, :REQUIRED, :QUOTED_LISTABLE
+
   # Authentication identity: the identity that matches the #password.
   #
   # RFC-2831[https://tools.ietf.org/html/rfc2831] uses the term +username+.
@@ -42,6 +63,59 @@ class Net::IMAP::SASL::DigestMD5Authenticator
   #
   attr_reader :authzid
 
+  # A namespace or collection of identities which contains +username+.
+  #
+  # Used by DIGEST-MD5, GSS-API, and NTLM.  This is often a domain name that
+  # contains the name of the host performing the authentication.
+  #
+  # <em>Defaults to the last realm in the server-provided list of
+  # realms.</em>
+  attr_reader :realm
+
+  # Fully qualified canonical DNS host name for the requested service.
+  #
+  # <em>Defaults to #realm.</em>
+  attr_reader :host
+
+  # The service protocol, a
+  # {registered GSSAPI service name}[https://www.iana.org/assignments/gssapi-service-names/gssapi-service-names.xhtml],
+  # e.g. "imap", "ldap", or "xmpp".
+  #
+  # For Net::IMAP, the default is "imap" and should not be overridden.  This
+  # must be set appropriately to use authenticators in other protocols.
+  #
+  # If an IANA-registered name isn't available, GSS-API
+  # (RFC-2743[https://tools.ietf.org/html/rfc2743]) allows the generic name
+  # "host".
+  attr_reader :service
+
+  # The generic server name when the server is replicated.
+  #
+  # +service_name+ will be ignored when it is +nil+ or identical to +host+.
+  #
+  # From RFC-2831[https://tools.ietf.org/html/rfc2831]:
+  # >>>
+  #     The service is considered to be replicated if the client's
+  #     service-location process involves resolution using standard DNS lookup
+  #     operations, and if these operations involve DNS records (such as SRV, or
+  #     MX) which resolve one DNS name into a set of other DNS names.  In this
+  #     case, the initial name used by the client is the "serv-name", and the
+  #     final name is the "host" component.
+  attr_reader :service_name
+
+  # Parameters sent by the server are stored in this hash.
+  attr_reader :sparams
+
+  # The charset sent by the server.  "UTF-8" (case insensitive) is the only
+  # allowed value.  +nil+ should be interpreted as ISO 8859-1.
+  attr_reader :charset
+
+  # nonce sent by the server
+  attr_reader :nonce
+
+  # qop-options sent by the server
+  attr_reader :qop
+
   # :call-seq:
   #   new(username,  password,  authzid = nil, **options) -> authenticator
   #   new(username:, password:, authzid:  nil, **options) -> authenticator
@@ -64,27 +138,59 @@ class Net::IMAP::SASL::DigestMD5Authenticator
   #   When +authzid+ is not set, the server should derive the authorization
   #   identity from the authentication identity.
   #
+  # * _optional_ #realm — A namespace for the #username, e.g. a domain.
+  #   <em>Defaults to the last realm in the server-provided realms list.</em>
+  # * _optional_ #host — FQDN for requested service.
+  #   <em>Defaults to</em> #realm.
+  # * _optional_ #service_name — The generic host name when the server is
+  #   replicated.
+  # * _optional_ #service — the registered service protocol.  E.g. "imap",
+  #   "smtp", "ldap", "xmpp".
+  #   <em>For Net::IMAP, this defaults to "imap".</em>
+  #
   # * _optional_ +warn_deprecation+ — Set to +false+ to silence the warning.
   #
   # Any other keyword arguments are silently ignored.
   def initialize(user = nil, pass = nil, authz = nil,
                  username: nil, password: nil, authzid: nil,
                  authcid: nil, secret: nil,
+                 realm: nil, service: "imap", host: nil, service_name: nil,
                  warn_deprecation: true, **)
     username = authcid || username || user or
       raise ArgumentError, "missing username (authcid)"
     password ||= secret || pass or raise ArgumentError, "missing password"
     authzid  ||= authz
     if warn_deprecation
-      warn "WARNING: DIGEST-MD5 SASL mechanism was deprecated by RFC6331."
-      # TODO: recommend SCRAM instead.
+      warn("WARNING: DIGEST-MD5 SASL mechanism was deprecated by RFC6331.",
+           category: :deprecated)
     end
+
     require "digest/md5"
+    require "securerandom"
     require "strscan"
     @username, @password, @authzid = username, password, authzid
+    @realm        = realm
+    @host         = host
+    @service      = service
+    @service_name = service_name
     @nc, @stage = {}, STAGE_ONE
   end
 
+  # From RFC-2831[https://tools.ietf.org/html/rfc2831]:
+  # >>>
+  #     Indicates the principal name of the service with which the client wishes
+  #     to connect, formed from the serv-type, host, and serv-name.  For
+  #     example, the FTP service on "ftp.example.com" would have a "digest-uri"
+  #     value of "ftp/ftp.example.com"; the SMTP server from the example above
+  #     would have a "digest-uri" value of "smtp/mail3.example.com/example.com".
+  def digest_uri
+    if service_name && service_name != host
+      "#{service}/#{host}/#{service_name}"
+    else
+      "#{service}/#{host}"
+    end
+  end
+
   def initial_response?; false end
 
   # Responds to server challenge in two stages.
@@ -92,78 +198,134 @@ class Net::IMAP::SASL::DigestMD5Authenticator
     case @stage
     when STAGE_ONE
       @stage = STAGE_TWO
-      sparams = {}
-      c = StringScanner.new(challenge)
-      while c.scan(/(?:\s*,)?\s*(\w+)=("(?:[^\\"]|\\.)*"|[^,]+)\s*/)
-        k, v = c[1], c[2]
-        if v =~ /^"(.*)"$/
-          v = $1
-          if v =~ /,/
-            v = v.split(',')
-          end
-        end
-        sparams[k] = v
-      end
+      @sparams = parse_challenge(challenge)
+      @qop     = sparams.key?("qop") ? ["auth"] : sparams["qop"].flatten
+      @nonce   = sparams["nonce"]  &.first
+      @charset = sparams["charset"]&.first
+      @realm ||= sparams["realm"]  &.last
+      @host  ||= realm
 
-      raise Net::IMAP::DataFormatError, "Bad Challenge: '#{challenge}'" unless c.eos? and sparams['qop']
-      raise Net::IMAP::Error, "Server does not support auth (qop = #{sparams['qop'].join(',')})" unless sparams['qop'].include?("auth")
+      if !qop.include?("auth")
+        raise DataFormatError, "Server does not support auth (qop = %p)" % [
+          sparams["qop"]
+        ]
+      elsif (emptykey = REQUIRED.find { sparams[_1].empty? })
+        raise DataFormatError, "Server didn't send %s (%p)" % [emptykey, challenge]
+      elsif (multikey = NO_MULTIPLES.find { sparams[_1].length > 1 })
+        raise DataFormatError, "Server sent multiple %s (%p)" % [multikey, challenge]
+      end
 
       response = {
-        :nonce => sparams['nonce'],
-        :username => @username,
-        :realm => sparams['realm'],
-        :cnonce => Digest::MD5.hexdigest("%.15f:%.15f:%d" % [Time.now.to_f, rand, Process.pid.to_s]),
-        :'digest-uri' => 'imap/' + sparams['realm'],
-        :qop => 'auth',
-        :maxbuf => 65535,
-        :nc => "%08d" % nc(sparams['nonce']),
-        :charset => sparams['charset'],
+        nonce:        nonce,
+        username:     username,
+        realm:        realm,
+        cnonce:       SecureRandom.base64(32),
+        "digest-uri": digest_uri,
+        qop:          "auth",
+        maxbuf:       65535,
+        nc:           "%08d" % nc(nonce),
+        charset:      charset,
       }
 
       response[:authzid] = @authzid unless @authzid.nil?
 
-      # now, the real thing
-      a0 = Digest::MD5.digest( [ response.values_at(:username, :realm), @password ].join(':') )
-
-      a1 = [ a0, response.values_at(:nonce,:cnonce) ].join(':')
-      a1 << ':' + response[:authzid] unless response[:authzid].nil?
-
-      a2 = "AUTHENTICATE:" + response[:'digest-uri']
-      a2 << ":00000000000000000000000000000000" if response[:qop] and response[:qop] =~ /^auth-(?:conf|int)$/
-
-      response[:response] = Digest::MD5.hexdigest(
-        [
-          Digest::MD5.hexdigest(a1),
-          response.values_at(:nonce, :nc, :cnonce, :qop),
-          Digest::MD5.hexdigest(a2)
-        ].join(':')
-      )
-
-      return response.keys.map {|key| qdval(key.to_s, response[key]) }.join(',')
+      response[:response] = response_value(response)
+      format_response(response)
     when STAGE_TWO
       @stage = STAGE_DONE
-      # if at the second stage, return an empty string
-      if challenge =~ /rspauth=/
-        return ''
-      else
-        raise ResponseParseError, challenge
-      end
+      raise ResponseParseError, challenge unless challenge =~ /rspauth=/
+      "" # if at the second stage, return an empty string
     else
       raise ResponseParseError, challenge
     end
+  rescue => error
+    @stage = error
+    raise
   end
 
   def done?; @stage == STAGE_DONE end
 
   private
 
+  LWS        = /[\r\n \t]*/n # less strict than RFC, more strict than '\s'
+  TOKEN      = /[^\x00-\x20\x7f()<>@,;:\\"\/\[\]?={}]+/n
+  QUOTED_STR = /"(?: [\t\x20-\x7e&&[^"]] | \\[\x00-\x7f] )*"/nx
+  LIST_DELIM = /(?:#{LWS} , )+ #{LWS}/nx
+  AUTH_PARAM = /
+    (#{TOKEN}) #{LWS} = #{LWS} (#{QUOTED_STR} | #{TOKEN}) #{LIST_DELIM}?
+  /nx
+  private_constant :LWS, :TOKEN, :QUOTED_STR, :LIST_DELIM, :AUTH_PARAM
+
+  def parse_challenge(challenge)
+    sparams = Hash.new {|h, k| h[k] = [] }
+    c = StringScanner.new(challenge)
+    c.skip LIST_DELIM
+    while c.scan AUTH_PARAM
+      k, v = c[1], c[2]
+      k = k.downcase
+      if v =~ /\A"(.*)"\z/mn
+        v = $1.gsub(/\\(.)/mn, '\1')
+        v = split_quoted_list(v, challenge) if QUOTED_LISTABLE.include? k
+      end
+      sparams[k] << v
+    end
+    if !c.eos?
+      raise DataFormatError, "Unparsable challenge: %p" % [challenge]
+    elsif sparams.empty?
+      raise DataFormatError, "Empty challenge: %p" % [challenge]
+    end
+    sparams
+  end
+
+  def split_quoted_list(value, challenge)
+    value.split(LIST_DELIM).reject(&:empty?).tap do
+      _1.any? or raise DataFormatError, "Bad Challenge: %p" % [challenge]
+    end
+  end
+
   def nc(nonce)
     if @nc.has_key? nonce
       @nc[nonce] = @nc[nonce] + 1
     else
       @nc[nonce] = 1
     end
-    return @nc[nonce]
+  end
+
+  def response_value(response)
+    a1 = compute_a1(response)
+    a2 = compute_a2(response)
+    Digest::MD5.hexdigest(
+      [
+        Digest::MD5.hexdigest(a1),
+        response.values_at(:nonce, :nc, :cnonce, :qop),
+        Digest::MD5.hexdigest(a2)
+      ].join(":")
+    )
+  end
+
+  def compute_a0(response)
+    Digest::MD5.digest(
+      [ response.values_at(:username, :realm), password ].join(":")
+    )
+  end
+
+  def compute_a1(response)
+    a0 = compute_a0(response)
+    a1 = [ a0, response.values_at(:nonce, :cnonce) ].join(":")
+    a1 << ":#{response[:authzid]}" unless response[:authzid].nil?
+    a1
+  end
+
+  def compute_a2(response)
+    a2 = "AUTHENTICATE:#{response[:"digest-uri"]}"
+    if response[:qop] and response[:qop] =~ /^auth-(?:conf|int)$/
+      a2 << ":00000000000000000000000000000000"
+    end
+    a2
+  end
+
+  def format_response(response)
+    response.map {|k, v| qdval(k.to_s, v) }.join(",")
   end
 
   # some responses need quoting

data/lib/net/imap/sasl/login_authenticator.rb

@@ -29,7 +29,8 @@ class Net::IMAP::SASL::LoginAuthenticator
                  warn_deprecation: true,
                  **)
     if warn_deprecation
-      warn "WARNING: LOGIN SASL mechanism is deprecated. Use PLAIN instead."
+      warn "WARNING: LOGIN SASL mechanism is deprecated. Use PLAIN instead.",
+           category: :deprecated
     end
     @user = authcid || username || user
     @password = password || secret || pass

data/lib/net/imap/sasl/protocol_adapters.rb

@@ -4,16 +4,72 @@ module Net
   class IMAP
     module SASL
 
+      # SASL::ProtocolAdapters modules are meant to be used as mixins for
+      # SASL::ClientAdapter and its subclasses.  Where the client adapter must
+      # be customized for each client library, the protocol adapter mixin
+      # handles \SASL requirements that are part of the protocol specification,
+      # but not specific to any particular client library.  In particular, see
+      # {RFC4422 §4}[https://www.rfc-editor.org/rfc/rfc4422.html#section-4]
+      #
+      # === Interface
+      #
+      # >>>
+      #   NOTE: This API is experimental, and may change.
+      #
+      # - {#command_name}[rdoc-ref:Generic#command_name] -- The name of the
+      #   command used to to initiate an authentication exchange.
+      # - {#service}[rdoc-ref:Generic#service] -- The GSSAPI service name.
+      # - {#encode_ir}[rdoc-ref:Generic#encode_ir]--Encodes an initial response.
+      # - {#decode}[rdoc-ref:Generic#decode] -- Decodes a server challenge.
+      # - {#encode}[rdoc-ref:Generic#encode] -- Encodes a client response.
+      # - {#cancel_response}[rdoc-ref:Generic#cancel_response] -- The encoded
+      #   client response used to cancel an authentication exchange.
+      #
+      # Other protocol requirements of the \SASL authentication exchange are
+      # handled by SASL::ClientAdapter.
+      #
+      # === Included protocol adapters
+      #
+      # - Generic -- a basic implementation of all of the methods listed above.
+      # - IMAP -- An adapter for the IMAP4 protocol.
+      # - SMTP -- An adapter for the \SMTP protocol with the +AUTH+ capability.
+      # - POP  -- An adapter for the POP3  protocol with the +SASL+ capability.
       module ProtocolAdapters
-        # This API is experimental, and may change.
+        # See SASL::ProtocolAdapters@Interface.
         module Generic
+          # The name of the protocol command used to initiate a \SASL
+          # authentication exchange.
+          #
+          # The generic implementation returns <tt>"AUTHENTICATE"</tt>.
           def command_name;     "AUTHENTICATE" end
-          def service;          raise "Implement in subclass or module" end
-          def host;             client.host end
-          def port;             client.port end
+
+          # A service name from the {GSSAPI/Kerberos/SASL Service Names
+          # registry}[https://www.iana.org/assignments/gssapi-service-names/gssapi-service-names.xhtml].
+          #
+          # The generic implementation returns <tt>"host"</tt>, which is the
+          # generic GSSAPI host-based service name.
+          def service;          "host" end
+
+          # Encodes an initial response string.
+          #
+          # The generic implementation returns the result of #encode, or returns
+          # <tt>"="</tt> when +string+ is empty.
           def encode_ir(string) string.empty? ? "=" : encode(string) end
+
+          # Encodes a client response string.
+          #
+          # The generic implementation returns the Base64 encoding of +string+.
           def encode(string)    [string].pack("m0") end
+
+          # Decodes a server challenge string.
+          #
+          # The generic implementation returns the Base64 decoding of +string+.
           def decode(string)    string.unpack1("m0") end
+
+          # Returns the message used by the client to abort an authentication
+          # exchange.
+          #
+          # The generic implementation returns <tt>"*"</tt>.
           def cancel_response;  "*" end
         end
 

data/lib/net/imap/sasl.rb

@@ -114,8 +114,8 @@ module Net
       # messages has not passed integrity checks.
       AuthenticationFailed = Class.new(Error)
 
-      # Indicates that authentication cannot proceed because one of the server's
-      # ended authentication prematurely.
+      # Indicates that authentication cannot proceed because the server ended
+      # authentication prematurely.
       class AuthenticationIncomplete < AuthenticationFailed
         # The success response from the server
         attr_reader :response
@@ -159,7 +159,10 @@ module Net
       # Returns the default global SASL::Authenticators instance.
       def self.authenticators; @authenticators ||= Authenticators.new end
 
-      # Delegates to <tt>registry.new</tt>  See Authenticators#new.
+      # Creates a new SASL authenticator, using SASL::Authenticators#new.
+      #
+      # +registry+ defaults to SASL.authenticators.  All other arguments are
+      # forwarded to to <tt>registry.new</tt>.
       def self.authenticator(*args, registry: authenticators, **kwargs, &block)
         registry.new(*args, **kwargs, &block)
       end

data/lib/net/imap/sasl_adapter.rb

@@ -12,7 +12,6 @@ module Net
 
       def response_errors;          RESPONSE_ERRORS                 end
       def sasl_ir_capable?;         client.capable?("SASL-IR")      end
-      def auth_capable?(mechanism); client.auth_capable?(mechanism) end
       def drop_connection;          client.logout!                  end
       def drop_connection!;         client.disconnect               end
     end