nano-store 0.3.13 → 0.3.14

data/vendor/Pods/BuildHeaders/NanoStore/NSFNanoStore_Private.h

@@ -0,0 +1,57 @@
+/*
+     NSFNanoStore_Private.h
+     NanoStore
+     
+     Copyright (c) 2010 Webbo, L.L.C. All rights reserved.
+     
+     Redistribution and use in source and binary forms, with or without modification, are permitted
+     provided that the following conditions are met:
+     
+     * Redistributions of source code must retain the above copyright notice, this list of conditions
+     and the following disclaimer.
+     * Redistributions in binary form must reproduce the above copyright notice, this list of conditions
+     and the following disclaimer in the documentation and/or other materials provided with the distribution.
+     * Neither the name of Webbo nor the names of its contributors may be used to endorse or promote
+     products derived from this software without specific prior written permission.
+     
+     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
+     WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+     PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY
+     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+     PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+     CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+     OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+     SUCH DAMAGE.
+ */
+
+#import "NSFNanoStore.h"
+
+/** \cond */
+
+@interface NSFNanoStore (Private)
++ (NSFNanoStore *)_createAndOpenDebugDatabase;
+- (NSFNanoResult *)_executeSQL:(NSString *)theSQLStatement;
+- (NSString*)_nestedDescriptionWithPrefixedSpace:(NSString *)prefixedSpace;
+- (BOOL)_initializePreparedStatementsWithError:(out NSError **)outError;
+- (void)_releasePreparedStatements;
+- (void)_setIsOurTransaction:(BOOL)value;
+- (BOOL)_isOurTransaction;
+- (BOOL)_setupCachingSchema;
+- (BOOL)_storeDictionary:(NSDictionary *)someInfo forKey:(NSString *)aKey forClassNamed:(NSString *)classType usingSQLite3Statement:(sqlite3_stmt *)storeValuesStatement error:(out NSError **)outError;
+- (BOOL)__storeDictionaries:(NSArray *)someObjects forKeys:(NSArray *)someKeys error:(out NSError **)outError;
+- (BOOL)_bindValue:(id)aValue forAttribute:(NSString *)anAttribute parameterNumber:(NSInteger)aParamNumber usingSQLite3Statement:(sqlite3_stmt *)aStatement;
+- (BOOL)_checkNanoStoreIsReadyAndReturnError:(out NSError **)outError;
+- (NSFNanoDatatype)_NSFDatatypeOfObject:(id)value;
+- (NSString *)_stringFromValue:(id)aValue;
++ (NSString *)_calendarDateToString:(NSDate *)aDate;
+- (void)_flattenCollection:(NSDictionary *)info keys:(NSMutableArray **)flattenedKeys values:(NSMutableArray **)flattenedValues;
+- (void)_flattenCollection:(id)someObject keyPath:(NSMutableArray **)aKeyPath keys:(NSMutableArray **)someKeys values:(NSMutableArray **)someValues;
+- (BOOL)_prepareSQLite3Statement:(sqlite3_stmt **)aStatement theSQLStatement:(NSString *)aSQLQuery;
+- (void)_executeSQLite3StepUsingSQLite3Statement:(sqlite3_stmt *)aStatement;
+- (BOOL)_addObjectsFromArray:(NSArray *)someObjects forceSave:(BOOL)forceSave error:(out NSError **)outError;
++ (NSDictionary *)_defaultTestData;
+- (BOOL)_backupFileStoreToDirectoryAtPath:(NSString *)aPath extension:(NSString *)anExtension compact:(BOOL)flag error:(out NSError **)outError;
+- (BOOL)_backupMemoryStoreToDirectoryAtPath:(NSString *)aPath extension:(NSString *)anExtension compact:(BOOL)flag error:(out NSError **)outError;
+@end
+
+/** \endcond */

data/vendor/Pods/BuildHeaders/NanoStore/NanoStore.h

@@ -0,0 +1,463 @@
+/*
+     NanoStore.h
+     NanoStore
+
+     Copyright (c) 2010 Webbo, L.L.C. All rights reserved.
+     
+     Redistribution and use in source and binary forms, with or without modification, are permitted
+     provided that the following conditions are met:
+     
+     * Redistributions of source code must retain the above copyright notice, this list of conditions
+     and the following disclaimer.
+     * Redistributions in binary form must reproduce the above copyright notice, this list of conditions
+     and the following disclaimer in the documentation and/or other materials provided with the distribution.
+     * Neither the name of Webbo nor the names of its contributors may be used to endorse or promote
+     products derived from this software without specific prior written permission.
+     
+     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
+     WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+     PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY
+     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+     PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+     CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+     OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+     SUCH DAMAGE.
+*/
+
+#import "NSFNanoObjectProtocol.h"
+#import "NSFNanoObject.h"
+#import "NSFNanoGlobals.h"
+#import "NSFNanoStore.h"
+#import "NSFNanoPredicate.h"
+#import "NSFNanoExpression.h"
+#import "NSFNanoSearch.h"
+#import "NSFNanoSortDescriptor.h"
+#import "NSFNanoResult.h"
+#import "NSFNanoBag.h"
+#import "NSFNanoEngine.h"
+#import "NSFNanoGlobals.h"
+
+/**
+ @mainpage Welcome To NanoStore
+ 
+ @section whatis_sec What is NanoStore?
+ 
+ NanoStore is an open source, lightweight schema-less local key-value document store written in Objective-C for Mac OS X and iOS.
+ 
+ Relational databases tend to have a rich understanding of the structure of your data, but requires some planing beforehand and some level of
+ maintenance as well. NanoStore provides the flexibility that comes with key-value document stores, but still understands something about your data.
+ Because the data is key-value based, it can be accessed quickly and can grow as much as needed... all without ever worrying about the schema.
+ 
+ @section mainadv_sec Main advantages
+ 
+ - No SQL knowledge required
+ - Schema-less
+ - Key-value based storage
+ - Store your own custom objects
+ - Bags, a free-form relational system
+ - Fast, direct object manipulation
+ - Dynamic queries
+ - Full index support, inner-objects, embedded arrays and dictionaries
+ - Convenience methods to access, manipulate and maintain SQLite databases
+ - Full SQLite access available
+ - Mac OS X Lion 10.7 and iOS 5 ready
+ - iOS library runs on the device and simulator
+ - ARC compliant
+ 
+ @section installation_sec Installation
+ 
+ Building NanoStore is very easy. Just follow these steps:
+ 
+ - 1) Download NanoStore
+ - 2) Open the NanoStore.xcodeproj file
+ - 3) Select Universal > My Mac 64-bit or 32-bit from the Scheme popup
+ - 4) Build (Command-B)
+ 
+ Now you should have a new <i>Distribution</i> directory within the NanoStore project directory which contains the Universal static library (armv6/armv7/i386)
+ as well as the header files. To add it in your project, do the following:
+ 
+ - 1) Drag the Distribution directory to the Project Navigator panel
+ - 2) Include #import "NanoStore.h" in your code
+ 
+ @details <b>Example:</b>
+ @code
+ #import "NanoStore.h"
+ 
+ @implementation MyDemoAppDelegate
+ 
+ - (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions
+ {
+     // Override point for customization after application launch.
+     // Instantiate a NanoStore and open it
+ 
+     NSFNanoStore *nanoStore = [NSFNanoStore createAndOpenStoreWithType:NSFMemoryStoreType path:nil error:nil];
+     ...
+ @endcode
+ 
+ @note
+ If you want to add a dependency between your project and NanoStore so that it gets automatically rebuilt when
+ you update NanoStore, do the following (we'll assume your app is called "MyDemoApp"):
+ 
+ - 1) Select the MyDemoApp project in the Project Navigator
+ - 2) Select the MyDemoApp target
+ - 3) Expand the Target Dependencies box
+ - 4) Click "+" and add NanoStore
+ 
+ @section howitworks_sec How does NanoStore work?
+ 
+ The basic unit of data in NanoStore is called NanoObject. A NanoObject is any object which conforms to the NSFNanoObjectProtocol protocol.
+ 
+ At its core, a NanoObject is nothing more than a wrapper around two properties:
+ 
+ - A dictionary which contains the metadata (provided by the developer)
+ - A key (UUID) that identifies the object (provided by NanoStore)
+ 
+ The dictionary <i>must</i> be serializable, which means that only the following data types are allowed:
+ 
+ - NSArray
+ - NSDictionary
+ - NSString
+ - NSData (*)
+ - NSDate
+ - NSNumber
+ 
+ (*) The data type NSData is allowed, but it will be excluded from the indexing process.
+ 
+ To save and retrieve objects from the document store, NanoStore moves the data around by encapsulating it in NanoObjects. In order to store the objects in
+ NanoStore the developer has three options:
+ 
+ - Use the NSFNanoObject class directly
+ - Expand your custom classes by inheriting from NSFNanoObject
+ - Expand your custom classes by implementing the NSFNanoObjectProtocol protocol
+ 
+ Regardless of the route you decide to take, NanoStore will be able to store and retrieve objects from the document store seamlessly. The beauty of this system is that
+ NanoStore returns the object as it was stored, that is, instantiating an object of the class that was originally stored.
+ 
+ @note
+ If the document store is opened by another application that doesn't implement the object that was stored, NanoStore will instantiate a
+ NSFNanoObject instead, thus allowing the app to retrieve the data seamlessly. If the object is then updated by this application, the original
+ class name will be honored.
+ 
+ <b>Example:</b>
+ 
+ - App A stores an object of class <i>Car</i>.
+ - App B retrieves the object, but since it doesn't know anything about the class <i>Car</i>, NanoStore returns a NSFNanoObject.
+ - App B updates the object, perhaps adding a timestamp or additional information. NanoStore saves it as a <i>Car</i>, not as a NSFNanoObject.
+ - App A retrieves the updated object as a <i>Car</i> object, in exactly the same format as it was originally stored.
+ 
+ @section typesofdocumentstores Types of Document Stores
+
+ There are three types of document stores available in NanoStore: in-memory, temporary and file-based. These document stores are defined by the \link NSFGlobals::NSFNanoStoreType NSFNanoStoreType \endlink type:
+ 
+ - NSFMemoryStoreType: create the transient backing store in RAM. Its contents are lost when the process exits. Fastest, uses more RAM (*).
+ - NSFTemporaryStoreType: create a transient temporary backing store on disk. Its contents are lost when the process exits. Slower, uses less RAM than NSFMemoryStoreType.
+ - NSFPersistentStoreType:create a persistant backing store on disk. Slower, uses less RAM than NSFMemoryStoreType (*).
+ 
+ @note
+ Until the limit set by NSFNanoEngine's \link NSFNanoEngine::cacheSize - (NSUInteger)cacheSize \endlink has been reached, memory usage would be the same for in-memory store and on-disk store. When the size
+ of the store grows beyond \link NSFNanoEngine::cacheSize - (NSUInteger)cacheSize \endlink in-memory stores start to consume more memory than on-disk ones, because it has nowhere to push pages out of the cache.
+ 
+ Typically, most developers may want to create and open the document store. To do that, use NSFNanoStore's \link createAndOpenStoreWithType:path:error: + (NSFNanoStore *)createAndOpenStoreWithType:(NSFNanoStoreType)theType path:(NSString *)thePath error:(out NSError **)outError \endlink method.
+ 
+ @details <b>Example:</b>
+ @code
+ // Instantiate an in-memory document store and open it. The path parameter is unused.
+ NSFNanoStore *nanoStore = [NSFNanoStore createAndOpenStoreWithType:NSFMemoryStoreType path:nil error:nil];
+ 
+ // Instantiate a temporary document store and open it. The path parameter is unused.
+ NSFNanoStore *nanoStore = [NSFNanoStore createAndOpenStoreWithType:NSFTemporaryStoreType path:nil error:nil];
+ 
+ // Instantiate a file-based document store and open it. The path parameter must be specified.
+ NSFNanoStore *nanoStore = [NSFNanoStore createAndOpenStoreWithType:NSFPersistentStoreType path:@"~/Desktop/myDatabase.database" error:nil];
+ @endcode
+ 
+ @note
+ In the case of file-based document stores, the file gets created automatically if it doesn't exist and then opened. If it already exists, it gets opened and made available for use right away.
+ 
+ There are instances where you may want to fine-tune the engine. Tunning the engine has to be performed before the document store is opened. Another method is available In NSFNanoStore for this
+ purpose: \link createStoreWithType:path: + (NSFNanoStore *)createStoreWithType:(NSFNanoStoreType)theType path:(NSString *)thePath \endlink.
+ 
+ @details <b>Example:</b>
+ @code
+ // Instantiate a file-based document store but don't open it right away. The path parameter must be specified.
+ NSFNanoStore *nanoStore = [NSFNanoStore createStoreWithType:NSFPersistentStoreType path:@"~/Desktop/myDatabase.database" error:nil];
+ 
+ // Obtain the engine
+ NSFNanoEngine *nanoStoreEngine = [nanoStore nanoStoreEngine];
+ 
+ // Set the synchronous mode setting
+ [nanoStoreEngine setSynchronousMode:SynchronousModeOff];
+ [nanoStoreEngine setEncodingType:NSFEncodingUTF16];
+ 
+ // Open the document store
+ [nanoStore openWithError:nil];
+ @endcode
+ 
+ @note
+ Check the section Performance Tips below for important information about how to get the most out of NanoStore.
+ 
+ @section workingwithnanoobject_sec Working with a NanoObject
+
+ There are three basic operations that NanoStore can perform with a NanoObject:
+ 
+ - Add it to the document store
+ - Update an existing object in the document store
+ - Remove it from the document store
+ 
+ To add an object, instantiate a \link NSFNanoObject::nanoObject NanoObject, \endlink populate it and add it to the document store.
+ 
+ @details <b>Example:</b>
+ @code
+ // Instantiate a NanoStore and open it
+ NSFNanoStore *nanoStore = [NSFNanoStore createAndOpenStoreWithType:NSFMemoryStoreType path:nil error:nil];
+ 
+ // Generate an empty NanoObject
+ NSFNanoObject *object = [NSFNanoObject nanoObject];
+ 
+ // Add some data
+ [object setObject:@"Doe" forKey:@"kLastName"];
+ [object setObject:@"John" forKey:@"kFirstName"];
+ [object setObject:[NSArray arrayWithObjects:@"jdoe@foo.com", @"jdoe@bar.com", nil] forKey:@"kEmails"];
+ 
+ // Add it to the document store
+ [nanoStore addObject:object error:nil];
+ 
+ // Close the document store
+ [nanoStore closeWithError:nil];
+ @endcode
+ 
+ Alternatively, you can instantiate a \link NSFNanoObject::nanoObject NanoObject \endlink providing a dictionary via \link NSFNanoObject::nanoObjectWithDictionary: + (NSFNanoObject*)nanoObjectWithDictionary:(NSDictionary *)theDictionary. \endlink
+ NanoStore will assign a UUID automatically when the \link NSFNanoObject::nanoObjectWithDictionary: NanoObject \endlink
+ is instantiated. This means that requesting the key from the \link NSFNanoObject::nanoObjectWithDictionary: NanoObject \endlink will return a valid UUID.
+ The same holds true for objects that inherit from NSFNanoObject. However, classes that implement the NSFNanoObjectProtocol protocol should
+ make sure they return a valid key via \link NSFNanoObjectProtocol::nanoObjectKey - (NSString *)nanoObjectKey \endlink
+ 
+ @warning
+ If an attempt is made to add or remove an object without a valid key, an exception of type \ref NSFGlobals::NSFNanoObjectBehaviorException
+ "NSFNanoObjectBehaviorException" will be raised.
+ 
+ To update an object, simply modify the object and add it to the document store. NanoStore will replace the existing object with the one being added.
+ 
+ @details <b>Example:</b>
+ @code
+ // Instantiate and open a NanoStore
+ NSFNanoStore *nanoStore = [NSFNanoStore createAndOpenStoreWithType:NSFMemoryStoreType path:nil error:nil];
+ 
+ // Assuming the dictionary exists, instantiate a NanoObject
+ NSDictionary *info = ...;
+ NSFNanoObject *object = [NSFNanoObject nanoObjectWithDictionary:info];
+ 
+ // Add the NanoObject to the document store
+ [nanoStore addObject:object error:nil];
+ 
+ // Update the NanoObject with new data
+ [object setObject:@"foo" forKey:@"SomeKey"];
+ 
+ // Update the NanoObject in the document store
+ [nanoStore addObject:object error:nil];
+ @endcode
+ 
+ To remove an object, there are several options available. The most common methods are found in NSFNanoStore:
+ 
+ - \link NSFNanoStore::removeObject:error: - (BOOL)removeObject:(id <NSFNanoObjectProtocol>)theObject error:(out NSError **)outError \endlink
+ - \link NSFNanoStore::removeObjectsWithKeysInArray:error: - (BOOL)removeObjectsWithKeysInArray:(NSArray *)theKeys error:(out NSError **)outError \endlink
+ - \link NSFNanoStore::removeObjectsInArray:error: - (BOOL)removeObjectsInArray:(NSArray *)theObjects error:(out NSError **)outError \endlink
+
+ @details <b>Example:</b>
+ @code
+ // Instantiate and open a NanoStore
+ NSFNanoStore *nanoStore = [NSFNanoStore createAndOpenStoreWithType:NSFMemoryStoreType path:nil error:nil];
+ 
+ // Assuming the dictionary exists, instantiate a NanoObject
+ NSDictionary *info = ...;
+ NSFNanoObject *object = [NSFNanoObject nanoObjectWithDictionary:info];
+ 
+ // Add the NanoObject to the document store
+ [nanoStore addObject:object error:nil];
+ 
+ // Remove the object
+ [nanoStore removeObject:object error:nil];
+ 
+ // ... or you could pass the key instead
+ [nanoStore removeObjectsWithKeysInArray:[NSArray arrayWithObject:[object nanoObjectKey]] error:nil];
+ @endcode
+ 
+ @section notaflatworld_sec It's not a flat World
+ 
+ Most database solutions force the developer to think in a two-dimensional space (rows and columns), forcing the developer to plan the schema ahead of
+ time. This situation is not ideal because in most cases schema refinements could be required, oftentimes impacting the code as well.
+ 
+ NanoStore goes beyond that allowing the developer to store objects in their natural form. These objects must conform to the NSFNanoObjectProtocol
+ protocol, providing NanoStore with the NSDictionary that will be stored. By using a dictionary data can be inspected very quickly, and it also allows the
+ structure to be defined in a hierarchical fashion as well, due to the fact that it includes support for nested collections (of type NSDictionary and NSArray.)
+ Each inner-object is indexed automatically, thus allowing to quickly find objects which contain a specific key and/or value.
+ 
+ By default, NanoStore allows objects to be stored without any sense of relationship to other objects. This simple format, while powerful, is limited because
+ the developer has to keep track of the relationships among objects. Some applications may need to relate objects, some of them perhaps of different nature or class
+ type. This is exactly what NanoBag (represented by the NSFNanoBag class) does: it allows any object conforming to the NSFNanoObjectProtocol protocol to be
+ added to the bag. By saving the bag with one single call, the new and/or modified are taken care of seamlessly.
+ 
+ The NSFNanoBag API is rich, allowing the developer to add, remove, reload and undo its changes, deflate it (thus saving memory) and inflate it whenever it's
+ required. In addition, it provides methods to obtain all bags, specific bags matching some keys, and bags containing a specific object
+ (see NSFNanoStore for more information).
+ 
+ @section wherearetheobjects_sec Where are my objects?
+ 
+ While NSFNanoStore provides some convenience methods to obtain standard objects such as bags, the bulk of the search mechanism is handled by NSFNanoSearch.
+ The steps involved to perform a search are quite simple:
+ 
+ - 1) Instantiate a search object
+ - 2) Configure the search via its accessors
+ - 3) Obtain the results specifying whether objects or keys should be returned (*)
+ 
+ (*) If introspecting the data is needed, request objects. You should request keys if you need to feed the result to another method, such as NSFNanoStore
+ \link NSFNanoStore::removeObjectsWithKeysInArray:error: -(BOOL)removeObjectsWithKeysInArray:(NSArray *)theKeys error:(out NSError **)outError \endlink method.
+ 
+ @details <b>Example: finding all objects with the attribute 'LastName' and value 'Doe'.</b>
+ @code
+ NSFNanoSearch *search = [NSFNanoSearch searchWithStore:nanoStore];
+ 
+ search.attribute = @"LastName";
+ search.match = NSFEqualTo;
+ search.value = @"Doe";
+ 
+ // Returns a dictionary with the UUID of the object (key) and the NanoObject (value).
+ NSDictionary *searchResults = [search searchObjectsWithReturnType:NSFReturnObjects error:nil];
+ @endcode
+ 
+ @details <b>Example: removing all objects with the attribute 'LastName' and value 'Doe'.</b>
+ @code
+ NSFNanoSearch *search = [NSFNanoSearch searchWithStore:nanoStore];
+ 
+ search.attribute = @"LastName";
+ search.match = NSFEqualTo;
+ search.value = @"Doe";
+ 
+ // Returns an array of matching UUIDs
+ NSArray *matchingKeys = [search searchObjectsWithReturnType:NSFReturnKeys error:nil];
+ 
+ // Remove the NanoObjects matching the selected UUIDs
+ NSError *outError = nil;
+ if (YES == [nanoStore removeObjectsWithKeysInArray:matchingKeys error:&outError]) {
+    NSLog(@"The matching objects have been removed.");
+ } else {
+    NSLog(@"An error has occurred while removing the matching objects. Reason: %@", [outError localizedDescription]);
+ }
+ @endcode
+ 
+ Another cool feature is the possibility to invoke aggregated functions (count, avg, min, max and total) on the search results. Using the search snippet above,
+ calculating the average salary of all people with last name equal to 'Doe' is very easy.
+ 
+ @details <b>Example: calculating the average salary of all objects with the attribute 'LastName' and value 'Doe'.</b>
+ @code
+ NSFNanoSearch *search = [NSFNanoSearch searchWithStore:nanoStore];
+ 
+ search.attribute = @"LastName";
+ search.match = NSFEqualTo;
+ search.value = @"Doe";
+ 
+ float averageSalary = [[search aggregateOperation:NSFAverage onAttribute:@"Salary"]floatValue];
+ @endcode
+ 
+ @section sorting_sec Sorting
+ 
+ Combining search and sort is an extremely easy operation. There are two simple parts:
+ 
+ - 1) Preparing your classes for sorting
+ - 2) Setup a search operation and set its sort descriptors
+ 
+ @section preparesorting_sec Preparing your classes for sorting
+ 
+ Since NanoStore relies on KVC to perform the sorts, a hint of the location where the data lives within the object is required. Since KVC uses a key path to reach the element being sorted, we need a way to "point" to it. Most custom classes will return <i>self</i>, as is the case for NSFNanoBag:
+ 
+ @code
+ - (id)rootObject
+ {
+     return self;
+ }
+ @endcode
+
+ <i>Self</i> in this case represents the top level, the location where the variables <i>name</i>, <i>key</i> and <i>hasUnsavedChanges</i> are located:
+ 
+ @code
+ @interface NSFNanoBag : NSObject <NSFNanoObjectProtocol, NSCopying>
+ {
+      NSFNanoStore     *store;
+      NSString         *name;
+      NSString         *key;
+      BOOL             hasUnsavedChanges;
+ }
+ @endcode
+ 
+ Assume we have an object that represents a person and its root object is set to <i>self</i>, just as demonstrated above:
+ 
+ @code
+ @interface Person : NSFNanoObject
+ {
+       NSString        *firstName;
+       NSString        *lastName;
+       NSString        *email;
+ }
+ @endcode
+
+ If we wanted to retrieve all the existing people with <i>firstName</i> equal to <i>John</i> sorted by <i>lastName</i> we would do the following:
+ 
+ @code
+ // Assume NanoStore has been opened elsewhere
+ NSFNanoStore *nanoStore = ...;
+ 
+ // Prepare the search
+ NSFNanoSearch *search = [NSFNanoSearch searchWithStore:nanoStore];
+ search.attribute = @"firstName";
+ search.match = NSFEqualTo;
+ search.value = @"John";
+ 
+ // Prepare and set the sort descriptor
+ NSFNanoSortDescriptor *sortByLastName = [[NSFNanoSortDescriptor alloc]initWithAttribute:@"lastName" ascending:YES];
+ search.sort = [NSArray arrayWithObject:sortByLastName];
+ 
+ // Perform the search
+ NSArray *searchResults = [search searchObjectsWithReturnType:NSFReturnObjects error:nil];
+ 
+ // Cleanup
+ [sortByLastName release];
+ @endcode
+
+ @section performancetips_sec Performance Tips
+ 
+ NanoStore by defaults saves every object to disk one by one. To speed up inserts and edited objects, increase NSFNanoStore's \link NSFNanoStore::saveInterval saveInterval \endlink property.
+ 
+ @details <b>Example:</b>
+ @code
+ // Instantiate and open a NanoStore
+ NSFNanoStore *nanoStore = [NSFNanoStore createAndOpenStoreWithType:NSFMemoryStoreType path:nil error:nil];
+ 
+ // Increase the save interval
+ [nanoStore setSaveInterval:1000];
+ 
+ // Do a bunch of inserts and/or edits
+ 
+ // Don't forget that some objects could be lingering in memory. Force a save.
+ [nanoStore saveStoreAndReturnError:nil];
+ @endcode
+ 
+ @note If you set the saveInterval value to anything other one, keep in mind that some objects may still be left unsaved after being added or modified. To make sure they're saved properly, call \link NSFNanoStore::saveStoreAndReturnError: - (BOOL)saveStoreAndReturnError:(out NSError **)outError \endlink.
+ 
+ Choosing a good saveInterval value is more art than science. While testing NanoStore using a medium-sized dictionary (iTunes' MP3 dictionary) setting saveInterval to 1000 resulted in the best performance. You may want to test with different numbers and fine-tune it for your data set.
+ 
+ @warning Setting saveInterval to a large number could result in decreased performance because SQLite's would have to spend more time reading the journal file and writing the changes to the database.
+ 
+ @section needhelp_sec Need more help?
+ There are two quick ways to find answers: reading the documentation and browsing the Unit tests.
+ 
+ While several attempts have been made to make the documentation easy to read and understand, it's far from perfect. If you find that the documentation is
+ incomplete, incorrect or needs some clarification, please file a bug. I'll appreciate it and correct it as soon as possible:
+ 
+ - NanoStore Documentation: http://dl.dropbox.com/u/2601212/NanoStore%202.0/html/index.html
+ - NanoStore Bug Tracker: https://github.com/tciuro/NanoStore/issues
+ - Twitter: http://twitter.com/nanostoredev
+ 
+ @section officialsourcerepo_sec Official Source Repository
+ The official repository for NanoStore is hosted on GitHub: https://github.com/tciuro/NanoStore
+ 
+ */