nano-fast-box 0.0.1

data/simplecov-0.22.0/lib/simplecov.rb

@@ -0,0 +1,470 @@
+# frozen_string_literal: true
+
+require "English"
+
+# Coverage may be inaccurate under JRUBY.
+if defined?(JRUBY_VERSION) && defined?(JRuby) && !org.jruby.RubyInstanceConfig.FULL_TRACE_ENABLED
+
+  # @see https://github.com/jruby/jruby/issues/1196
+  # @see https://github.com/metricfu/metric_fu/pull/226
+  # @see https://github.com/simplecov-ruby/simplecov/issues/420
+  # @see https://github.com/simplecov-ruby/simplecov/issues/86
+  # @see https://jira.codehaus.org/browse/JRUBY-6106
+
+  warn 'Coverage may be inaccurate; set the "--debug" command line option,' \
+    ' or do JRUBY_OPTS="--debug"' \
+    ' or set the "debug.fullTrace=true" option in your .jrubyrc'
+end
+
+#
+# Code coverage for ruby. Please check out README for a full introduction.
+#
+module SimpleCov
+  class << self
+    attr_accessor :running, :pid
+
+    # Basically, should we take care of at_exit behavior or something else?
+    # Used by the minitest plugin. See lib/minitest/simplecov_plugin.rb
+    attr_accessor :external_at_exit
+    alias external_at_exit? external_at_exit
+
+    #
+    # Sets up SimpleCov to run against your project.
+    # You can optionally specify a profile to use as well as configuration with a block:
+    #   SimpleCov.start
+    #    OR
+    #   SimpleCov.start 'rails' # using rails profile
+    #    OR
+    #   SimpleCov.start do
+    #     add_filter 'test'
+    #   end
+    #     OR
+    #   SimpleCov.start 'rails' do
+    #     add_filter 'test'
+    #   end
+    #
+    # Please check out the RDoc for SimpleCov::Configuration to find about available config options
+    #
+    def start(profile = nil, &block)
+      require "coverage"
+      initial_setup(profile, &block)
+      require_relative "./simplecov/process" if SimpleCov.enabled_for_subprocesses? &&
+                                                ::Process.respond_to?(:fork)
+
+      make_parallel_tests_available
+
+      @result = nil
+      self.pid = Process.pid
+
+      start_coverage_measurement
+    end
+
+    #
+    # Collate a series of SimpleCov result files into a single SimpleCov output.
+    #
+    # You can optionally specify configuration with a block:
+    #   SimpleCov.collate Dir["simplecov-resultset-*/.resultset.json"]
+    #    OR
+    #   SimpleCov.collate Dir["simplecov-resultset-*/.resultset.json"], 'rails' # using rails profile
+    #    OR
+    #   SimpleCov.collate Dir["simplecov-resultset-*/.resultset.json"] do
+    #     add_filter 'test'
+    #   end
+    #    OR
+    #   SimpleCov.collate Dir["simplecov-resultset-*/.resultset.json"], 'rails' do
+    #     add_filter 'test'
+    #   end
+    #
+    # Please check out the RDoc for SimpleCov::Configuration to find about
+    # available config options, or checkout the README for more in-depth
+    # information about coverage collation
+    #
+    # By default `collate` ignores the merge_timeout so all results of all files specified will be
+    # merged together. If you want to honor the merge_timeout then provide the keyword argument
+    # `ignore_timeout: false`.
+    #
+    def collate(result_filenames, profile = nil, ignore_timeout: true, &block)
+      raise "There are no reports to be merged" if result_filenames.empty?
+
+      initial_setup(profile, &block)
+
+      # Use the ResultMerger to produce a single, merged result, ready to use.
+      @result = ResultMerger.merge_and_store(*result_filenames, ignore_timeout: ignore_timeout)
+
+      run_exit_tasks!
+    end
+
+    #
+    # Returns the result for the current coverage run, merging it across test suites
+    # from cache using SimpleCov::ResultMerger if use_merging is activated (default)
+    #
+    def result
+      return @result if result?
+
+      # Collect our coverage result
+      process_coverage_result if running
+
+      # If we're using merging of results, store the current result
+      # first (if there is one), then merge the results and return those
+      if use_merging
+        wait_for_other_processes
+        SimpleCov::ResultMerger.store_result(@result) if result?
+        @result = SimpleCov::ResultMerger.merged_result
+      end
+
+      @result
+    ensure
+      self.running = false
+    end
+
+    #
+    # Returns nil if the result has not been computed
+    # Otherwise, returns the result
+    #
+    def result?
+      defined?(@result) && @result
+    end
+
+    #
+    # Applies the configured filters to the given array of SimpleCov::SourceFile items
+    #
+    def filtered(files)
+      result = files.clone
+      filters.each do |filter|
+        result = result.reject { |source_file| filter.matches?(source_file) }
+      end
+      SimpleCov::FileList.new result
+    end
+
+    #
+    # Applies the configured groups to the given array of SimpleCov::SourceFile items
+    #
+    def grouped(files)
+      grouped = {}
+      grouped_files = []
+      groups.each do |name, filter|
+        grouped[name] = SimpleCov::FileList.new(files.select { |source_file| filter.matches?(source_file) })
+        grouped_files += grouped[name]
+      end
+      if !groups.empty? && !(other_files = files.reject { |source_file| grouped_files.include?(source_file) }).empty?
+        grouped["Ungrouped"] = SimpleCov::FileList.new(other_files)
+      end
+      grouped
+    end
+
+    #
+    # Applies the profile of given name on SimpleCov configuration
+    #
+    def load_profile(name)
+      profiles.load(name)
+    end
+
+    def load_adapter(name)
+      warn "#{Kernel.caller.first}: [DEPRECATION] #load_adapter is deprecated. Use #load_profile instead."
+      load_profile(name)
+    end
+
+    #
+    # Clear out the previously cached .result. Primarily useful in testing
+    #
+    def clear_result
+      @result = nil
+    end
+
+    def at_exit_behavior
+      # If we are in a different process than called start, don't interfere.
+      return if SimpleCov.pid != Process.pid
+
+      # If SimpleCov is no longer running then don't run exit tasks
+      SimpleCov.run_exit_tasks! if SimpleCov.running
+    end
+
+    # @api private
+    #
+    # Called from at_exit block
+    #
+    def run_exit_tasks!
+      error_exit_status = exit_status_from_exception
+
+      at_exit.call
+
+      exit_and_report_previous_error(error_exit_status) if previous_error?(error_exit_status)
+      process_results_and_report_error if ready_to_process_results?
+    end
+
+    #
+    # @api private
+    #
+    # Returns the exit status from the exit exception
+    #
+    def exit_status_from_exception
+      # Capture the current exception if it exists
+      @exit_exception = $ERROR_INFO
+      return nil unless @exit_exception
+
+      if @exit_exception.is_a?(SystemExit)
+        @exit_exception.status
+      else
+        SimpleCov::ExitCodes::EXCEPTION
+      end
+    end
+
+    # @api private
+    def previous_error?(error_exit_status)
+      # Normally it'd be enough to check for previous error but when running test_unit
+      # status is 0
+      error_exit_status && error_exit_status != SimpleCov::ExitCodes::SUCCESS
+    end
+
+    #
+    # @api private
+    #
+    # Thinking: Move this behavior earlier so if there was an error we do nothing?
+    def exit_and_report_previous_error(exit_status)
+      warn("Stopped processing SimpleCov as a previous error not related to SimpleCov has been detected") if print_error_status
+      Kernel.exit(exit_status)
+    end
+
+    # @api private
+    def ready_to_process_results?
+      final_result_process? && result?
+    end
+
+    def process_results_and_report_error
+      exit_status = process_result(result)
+
+      # Force exit with stored status (see github issue #5)
+      if exit_status.positive?
+        warn("SimpleCov failed with exit #{exit_status} due to a coverage related error") if print_error_status
+        Kernel.exit exit_status
+      end
+    end
+
+    # @api private
+    #
+    # Usage:
+    #   exit_status = SimpleCov.process_result(SimpleCov.result, exit_status)
+    #
+    def process_result(result)
+      result_exit_status = result_exit_status(result)
+      write_last_run(result) if result_exit_status == SimpleCov::ExitCodes::SUCCESS
+      result_exit_status
+    end
+
+    # @api private
+    CoverageLimits = Struct.new(:minimum_coverage, :minimum_coverage_by_file, :maximum_coverage_drop, keyword_init: true)
+    def result_exit_status(result)
+      coverage_limits = CoverageLimits.new(
+        minimum_coverage: minimum_coverage, minimum_coverage_by_file: minimum_coverage_by_file,
+        maximum_coverage_drop: maximum_coverage_drop
+      )
+
+      ExitCodes::ExitCodeHandling.call(result, coverage_limits: coverage_limits)
+    end
+
+    #
+    # @api private
+    #
+    def final_result_process?
+      # checking for ENV["TEST_ENV_NUMBER"] to determine if the tests are being run in parallel
+      !defined?(ParallelTests) || !ENV["TEST_ENV_NUMBER"] || ParallelTests.last_process?
+    end
+
+    #
+    # @api private
+    #
+    def wait_for_other_processes
+      return unless defined?(ParallelTests) && final_result_process?
+
+      ParallelTests.wait_for_other_processes_to_finish
+    end
+
+    #
+    # @api private
+    #
+    def write_last_run(result)
+      SimpleCov::LastRun.write(result:
+        result.coverage_statistics.transform_values do |stats|
+          round_coverage(stats.percent)
+        end)
+    end
+
+    #
+    # @api private
+    #
+    # Rounding down to be extra strict, see #679
+    def round_coverage(coverage)
+      coverage.floor(2)
+    end
+
+  private
+
+    def initial_setup(profile, &block)
+      load_profile(profile) if profile
+      configure(&block) if block_given?
+      self.running = true
+    end
+
+    #
+    # Trigger Coverage.start depends on given config coverage_criterion
+    #
+    # With Positive branch it supports all coverage measurement types
+    # With Negative branch it supports only line coverage measurement type
+    #
+    def start_coverage_measurement
+      # This blog post gives a good run down of the coverage criterias introduced
+      # in Ruby 2.5: https://blog.bigbinary.com/2018/04/11/ruby-2-5-supports-measuring-branch-and-method-coverages.html
+      # There is also a nice writeup of the different coverage criteria made in this
+      # comment  https://github.com/simplecov-ruby/simplecov/pull/692#discussion_r281836176 :
+      # Ruby < 2.5:
+      # https://github.com/ruby/ruby/blob/v1_9_3_374/ext/coverage/coverage.c
+      # traditional mode (Array)
+      #
+      # Ruby 2.5:
+      # https://bugs.ruby-lang.org/issues/13901
+      # https://github.com/ruby/ruby/blob/v2_5_3/ext/coverage/coverage.c
+      # default: traditional/compatible mode (Array)
+      # :lines - like traditional mode but using Hash
+      # :branches
+      # :methods
+      # :all - same as lines + branches + methods
+      #
+      # Ruby >= 2.6:
+      # https://bugs.ruby-lang.org/issues/15022
+      # https://github.com/ruby/ruby/blob/v2_6_3/ext/coverage/coverage.c
+      # default: traditional/compatible mode (Array)
+      # :lines - like traditional mode but using Hash
+      # :branches
+      # :methods
+      # :oneshot_lines - can not be combined with lines
+      # :all - same as lines + branches + methods
+      #
+      if coverage_start_arguments_supported?
+        start_coverage_with_criteria
+      else
+        Coverage.start unless Coverage.running?
+      end
+    end
+
+    def start_coverage_with_criteria
+      start_arguments = coverage_criteria.map do |criterion|
+        [lookup_corresponding_ruby_coverage_name(criterion), true]
+      end.to_h
+
+      start_arguments[:eval] = true if coverage_for_eval_enabled?
+
+      Coverage.start(start_arguments) unless Coverage.running?
+    end
+
+    CRITERION_TO_RUBY_COVERAGE = {
+      branch: :branches,
+      line: :lines
+    }.freeze
+    def lookup_corresponding_ruby_coverage_name(criterion)
+      CRITERION_TO_RUBY_COVERAGE.fetch(criterion)
+    end
+
+    #
+    # Finds files that were to be tracked but were not loaded and initializes
+    # the line-by-line coverage to zero (if relevant) or nil (comments / whitespace etc).
+    #
+    def add_not_loaded_files(result)
+      if tracked_files
+        result = result.dup
+        Dir[tracked_files].each do |file|
+          absolute_path = File.expand_path(file)
+          result[absolute_path] ||= SimulateCoverage.call(absolute_path)
+        end
+      end
+
+      result
+    end
+
+    #
+    # Call steps that handle process coverage result
+    #
+    # @return [Hash]
+    #
+    def process_coverage_result
+      adapt_coverage_result
+      remove_useless_results
+      result_with_not_loaded_files
+    end
+
+    #
+    # Unite the result so it wouldn't matter what coverage type was called
+    #
+    # @return [Hash]
+    #
+    def adapt_coverage_result
+      @result = SimpleCov::ResultAdapter.call(Coverage.result)
+    end
+
+    #
+    # Filter coverage result
+    # The result before filter also has result of coverage for files
+    # are not related to the project like loaded gems coverage.
+    #
+    # @return [Hash]
+    #
+    def remove_useless_results
+      @result = SimpleCov::UselessResultsRemover.call(@result)
+    end
+
+    #
+    # Initialize result with files that are not included by coverage
+    # and added inside the config block
+    #
+    # @return [Hash]
+    #
+    def result_with_not_loaded_files
+      @result = SimpleCov::Result.new(add_not_loaded_files(@result))
+    end
+
+    # parallel_tests isn't always available, see: https://github.com/grosser/parallel_tests/issues/772
+    def make_parallel_tests_available
+      return if defined?(ParallelTests)
+      return unless probably_running_parallel_tests?
+
+      require "parallel_tests"
+    rescue LoadError
+      warn("SimpleCov guessed you were running inside parallel tests but couldn't load it. Please file a bug report with us!")
+    end
+
+    def probably_running_parallel_tests?
+      ENV["TEST_ENV_NUMBER"] && ENV["PARALLEL_TEST_GROUPS"]
+    end
+  end
+end
+
+# requires are down here here for a load order reason I'm not sure what it is about
+require "set"
+require "forwardable"
+require_relative "simplecov/configuration"
+SimpleCov.extend SimpleCov::Configuration
+require_relative "simplecov/coverage_statistics"
+require_relative "simplecov/exit_codes"
+require_relative "simplecov/profiles"
+require_relative "simplecov/source_file/line"
+require_relative "simplecov/source_file/branch"
+require_relative "simplecov/source_file"
+require_relative "simplecov/file_list"
+require_relative "simplecov/result"
+require_relative "simplecov/filter"
+require_relative "simplecov/formatter"
+require_relative "simplecov/last_run"
+require_relative "simplecov/lines_classifier"
+require_relative "simplecov/result_merger"
+require_relative "simplecov/command_guesser"
+require_relative "simplecov/version"
+require_relative "simplecov/result_adapter"
+require_relative "simplecov/combine"
+require_relative "simplecov/combine/branches_combiner"
+require_relative "simplecov/combine/files_combiner"
+require_relative "simplecov/combine/lines_combiner"
+require_relative "simplecov/combine/results_combiner"
+require_relative "simplecov/useless_results_remover"
+require_relative "simplecov/simulate_coverage"
+
+# Load default config
+require_relative "simplecov/defaults" unless ENV["SIMPLECOV_NO_DEFAULTS"]

metadata

@@ -0,0 +1,90 @@
+--- !ruby/object:Gem::Specification
+name: nano-fast-box
+version: !ruby/object:Gem::Version
+  version: 0.0.1
+platform: ruby
+authors:
+- Andrey78
+bindir: bin
+cert_chain: []
+date: 2026-07-06 00:00:00.000000000 Z
+dependencies: []
+description: University research based on simplecov
+email:
+- cakoc614@gmail.com
+executables: []
+extensions: []
+extra_rdoc_files: []
+files:
+- nano-fast-box.gemspec
+- simplecov-0.22.0/CHANGELOG.md
+- simplecov-0.22.0/LICENSE
+- simplecov-0.22.0/README.md
+- simplecov-0.22.0/doc/alternate-formatters.md
+- simplecov-0.22.0/doc/commercial-services.md
+- simplecov-0.22.0/doc/editor-integration.md
+- simplecov-0.22.0/lib/minitest/simplecov_plugin.rb
+- simplecov-0.22.0/lib/simplecov.rb
+- simplecov-0.22.0/lib/simplecov/combine.rb
+- simplecov-0.22.0/lib/simplecov/combine/branches_combiner.rb
+- simplecov-0.22.0/lib/simplecov/combine/files_combiner.rb
+- simplecov-0.22.0/lib/simplecov/combine/lines_combiner.rb
+- simplecov-0.22.0/lib/simplecov/combine/results_combiner.rb
+- simplecov-0.22.0/lib/simplecov/command_guesser.rb
+- simplecov-0.22.0/lib/simplecov/configuration.rb
+- simplecov-0.22.0/lib/simplecov/coverage_statistics.rb
+- simplecov-0.22.0/lib/simplecov/default_formatter.rb
+- simplecov-0.22.0/lib/simplecov/defaults.rb
+- simplecov-0.22.0/lib/simplecov/exit_codes.rb
+- simplecov-0.22.0/lib/simplecov/exit_codes/exit_code_handling.rb
+- simplecov-0.22.0/lib/simplecov/exit_codes/maximum_coverage_drop_check.rb
+- simplecov-0.22.0/lib/simplecov/exit_codes/minimum_coverage_by_file_check.rb
+- simplecov-0.22.0/lib/simplecov/exit_codes/minimum_overall_coverage_check.rb
+- simplecov-0.22.0/lib/simplecov/file_list.rb
+- simplecov-0.22.0/lib/simplecov/filter.rb
+- simplecov-0.22.0/lib/simplecov/formatter.rb
+- simplecov-0.22.0/lib/simplecov/formatter/multi_formatter.rb
+- simplecov-0.22.0/lib/simplecov/formatter/simple_formatter.rb
+- simplecov-0.22.0/lib/simplecov/last_run.rb
+- simplecov-0.22.0/lib/simplecov/lines_classifier.rb
+- simplecov-0.22.0/lib/simplecov/load_global_config.rb
+- simplecov-0.22.0/lib/simplecov/no_defaults.rb
+- simplecov-0.22.0/lib/simplecov/process.rb
+- simplecov-0.22.0/lib/simplecov/profiles.rb
+- simplecov-0.22.0/lib/simplecov/profiles/bundler_filter.rb
+- simplecov-0.22.0/lib/simplecov/profiles/hidden_filter.rb
+- simplecov-0.22.0/lib/simplecov/profiles/rails.rb
+- simplecov-0.22.0/lib/simplecov/profiles/root_filter.rb
+- simplecov-0.22.0/lib/simplecov/profiles/test_frameworks.rb
+- simplecov-0.22.0/lib/simplecov/result.rb
+- simplecov-0.22.0/lib/simplecov/result_adapter.rb
+- simplecov-0.22.0/lib/simplecov/result_merger.rb
+- simplecov-0.22.0/lib/simplecov/simulate_coverage.rb
+- simplecov-0.22.0/lib/simplecov/source_file.rb
+- simplecov-0.22.0/lib/simplecov/source_file/branch.rb
+- simplecov-0.22.0/lib/simplecov/source_file/line.rb
+- simplecov-0.22.0/lib/simplecov/useless_results_remover.rb
+- simplecov-0.22.0/lib/simplecov/version.rb
+homepage: https://rubygems.org/profiles/Andrey78
+licenses:
+- MIT
+metadata:
+  source_code_uri: https://github.com/Andrey78/nano-fast-box
+rdoc_options: []
+require_paths:
+- lib
+required_ruby_version: !ruby/object:Gem::Requirement
+  requirements:
+  - - ">="
+    - !ruby/object:Gem::Version
+      version: '0'
+required_rubygems_version: !ruby/object:Gem::Requirement
+  requirements:
+  - - ">="
+    - !ruby/object:Gem::Version
+      version: '0'
+requirements: []
+rubygems_version: 3.6.2
+specification_version: 4
+summary: Research test
+test_files: []