mysh 0.1.13 → 0.1.14

checksums.yaml

@@ -1,7 +1,7 @@
 ---
 SHA1:
-  metadata.gz: cc384b16374733a18131ead73b90537a16f06b1a
-  data.tar.gz: aaa9a7f9e10bf52d685e9fdb6a2ec1de8c92eb60
+  metadata.gz: 6d1ba8a1e0f44a3d96f072108abe9bba55aefebf
+  data.tar.gz: f5811e7f8aeba916be0b9dccd4864282314cb0f0
 SHA512:
-  metadata.gz: 15b4e08c89be15e6ef264734cde9c2a0314dcd65ab00e5702dace3303d8c6cfd209ccb05597c8b7404c4cb94735370df7a53dc75251ff084d848cf718ff28bba
-  data.tar.gz: 6549e793c55788c7dc64dc147dee847140131881de18959159badaf9560cab01d2360a87973dc4adcd31c5c9dfafe0863e7f1c0301b3dc221bf95c8d129e6421
+  metadata.gz: a81089b6f2bf37d034eb8d1860774999e531ac34042d371dc9348090639f232c4d177cbfaee70220e24f68bd7a4e63420d39ba5fa983d14a1d3034a92d0bf432
+  data.tar.gz: 57a32385f635325c19ea131c79c1e8463ec7f405ff11a4e35934a64bae57baf54b07c8069c7050ce9f4b7f353b492d289f66fc854d97399437ce8c8c1439bef3

data/README.md

@@ -20,6 +20,9 @@ command shell within Ruby applications and Rails web sites.
 See the original article at:
 (http://www.blackbytes.info/2016/07/writing-a-shell-in-ruby/)
 
+By the way. The briefest look at the code will reveal that mysh has grown to be
+way more than 25 lines long. Gotta love dem features!
+
 ## Installation
 
 Add this line to your application's Gemfile:
@@ -80,45 +83,37 @@ mysh> =cos(PI)
 
 The following table describes the available math functions.
 
-Function   |Returns |Description
------------|--------|-----------------------------------------------------
-acos(x)    |Float   |Computes the arc cosine of x. Returns 0..PI.
-acosh(x)   |Float   |Computes the inverse hyperbolic cosine of x.
-asin(x)    |Float   |Computes the arc sine of x. Returns -PI/2..PI/2.
-asinh(x)   |Float   |Computes the inverse hyperbolic sine of x.
-atan(x)    |Float   |Computes the arc tangent of x. Returns -PI/2..PI/2.
-atan2(y,x) |Float   |Computes the arc tangent given y and x.
-           |        |Returns a Float in the range -PI..PI.
-atanh(x)   |Float   |Computes the inverse hyperbolic tangent of x.
-cbrt(x)    |Float   |Returns the cube root of x.
-cos(x)     |Float   |Computes the cosine of x (expressed in radians).
-           |        |Returns a Float in the range -1.0..1.0.
-cosh(x)    |Float   |Computes the hyperbolic cosine of x (expressed in radians).
-erf(x)     |Float   |Calculates the error function of x.
-erfc(x)    |Float   |Calculates the complementary error function of x.
-exp(x)     |Float   |Returns e**x.
-frexp(x)   |Array   |Returns a two-element array containing the normalized
-           |        |fraction (a Float) and exponent (a Fixnum) of x.
-gamma(x)   |Float   |Calculates the gamma function of x.
-hypot(x,y) |Float   |Returns sqrt(x\*\*2 + y\*\*2), the hypotenuse of a right-angled
-           |        |triangle with sides x and y.
-ldexp(m,e) |Float   |Returns the value of m\*(2\*\*e) where m is the mantissa and
-           |        |e is the power of 2 exponent.
-lgamma(x)  |Array   |Returns a two-element array containing the log of the
-           |        |gamma of x and the sign of gamma of x.
-log(x)     |Float   |Computes the natural log of x.
-log(x,B)   |Float   |Computes the base B log of x.
-log10(x)   |Float   |Returns the base 10 logarithm of x.
-log2(x)    |Float   |Returns the base 2 logarithm of x.
-sin(x)     |Float   |Computes the sine of x (expressed in radians).
-           |        |Returns a Float in the range -1.0..1.0.
-sinh(x)    |Float   |Computes the hyperbolic sine of x (expressed in radians).
-sqrt(x)    |Float   |Returns the non-negative square root of x.
-tan(x)     |Float   |Computes the tangent of x (expressed in radians).
-tanh(x)    |Float   |Computes the hyperbolic tangent of x (expressed in radians).
-           |        |
-PI         |Float   |The value 3.141592653589793
-E          |Float   |The value 2.718281828459045
+Function   |Type  |Description
+-----------|------|-----------------------------------------------------
+acos(x)    |Float |The arc cosine of x. Returns 0..π.
+acosh(x)   |Float |The inverse hyperbolic cosine of x.
+asin(x)    |Float |The arc sine of x. Returns -π/2..π/2.
+asinh(x)   |Float |The inverse hyperbolic sine of x.
+atan(x)    |Float |The arc tangent of x. Returns -π/2..π/2.
+atan2(y,x) |Float |The arc tangent given y and x. Returns -π..π.
+atanh(x)   |Float |The inverse hyperbolic tangent of x.
+cbrt(x)    |Float |The cube root of x. (∛x)
+cos(x)     |Float |The cosine of x (in radians). Returns -1.0..1.0.
+cosh(x)    |Float |The hyperbolic cosine of x (in radians).
+erf(x)     |Float |The error function of x.
+erfc(x)    |Float |The complementary error function of x.
+exp(x)     |Float |Raise e to the power of x. (e<sup>x</sup>).
+frexp(x)   |Array |Extracts a two-element array containing [fraction, exponent].
+gamma(x)   |Float |The gamma function of x. (&#915;x).
+hypot(x,y) |Float |The hypotenuse of a right-angled triangle. &#8730;(x&#178; + y&#178;)
+ldexp(m,e) |Float |Builds a value where f is the fraction and e is the exponent.
+lgamma(x)  |Array |Builds a two-element array [ln(&#124;&#915;x&#124;), sign(&#915;x)]
+log(x)     |Float |The natural log of x. (log<sub>e</sub> x) or (ln x).
+log(x,b)   |Float |The base b log of x. (log<sub>b</sub> x).
+log10(x)   |Float |The base 10 log of x. (log<sub>10</sub> x).
+log2(x)    |Float |The base 2 log of x. (log<sub>2</sub> x).
+sin(x)     |Float |The sine of x (in radians). Returns -1.0..1.0.
+sinh(x)    |Float |The hyperbolic sine of x (in radians).
+sqrt(x)    |Float |The non-negative square root of x. (&#8730;x).
+tan(x)     |Float |The tangent of x (in radians).
+tanh(x)    |Float |The hyperbolic tangent of x (in radians).
+E          |Float |The value e (2.718281828459045)
+PI         |Float |The value &#960; (3.141592653589793)
 
 #### Internal mysh commands:
 
@@ -129,8 +124,8 @@ The following set of commands are supported:
 ```
 !         Display the mysh command history.
 ?         Display help information for mysh.
-cd <dir>  Change directory to the optional <dir> parameter.
-          Then display the current working directory.
+cd <dir>  Change directory to the optional <dir> parameter
+          and then display the current working directory.
 exit      Exit mysh.
 help      Display help information for mysh.
 history   Display the mysh command history.

data/lib/mysh.rb

@@ -31,9 +31,9 @@ module Mysh
       input = @input.readline(prompt: 'mysh>')
 
       begin
-        @exec_host.execute(input)      ||
-        InternalCommand.execute(input) ||
-        ruby_execute(input)            ||
+        @exec_host.execute(input) ||
+        Command.execute(input)    ||
+        ruby_execute(input)       ||
         system(input)
       rescue Interrupt => err
         puts err

data/lib/mysh/commands/cd.rb

@@ -4,12 +4,12 @@
 module Mysh
 
   #* cd.rb -- The mysh internal cd command.
-  class InternalCommand
+  class Command
     #Add the cd command to the library.
-    desc = ['Change directory to the optional <dir> parameter.',
-            'Then display the current working directory.']
+    desc = ['Change directory to the optional <dir> parameter',
+            'and then display the current working directory.']
 
-    add('cd <dir>', desc) do |args|
+    COMMANDS.add('cd <dir>', desc) do |args|
       begin
         Dir.chdir(args[0]) unless args.empty?
         puts decorate(Dir.pwd)
@@ -19,7 +19,7 @@ module Mysh
     end
 
     #Add the pwd command to the library.
-    add('pwd', 'Display the current working directory.') do |args|
+    COMMANDS.add('pwd', 'Display the current working directory.') do |args|
       begin
         puts decorate(Dir.pwd)
       rescue => err

data/lib/mysh/commands/command_path.rb

@@ -4,7 +4,7 @@
 module Mysh
 
   #* commands/command_path.rb -- A convenient hook to the command folder.
-  class InternalCommand
+  class Command
 
     #Capture this folder's name.
     COMMAND_PATH = File.dirname(__FILE__) + "/"

data/lib/mysh/commands/exit.rb

@@ -4,13 +4,13 @@
 module Mysh
 
   #* exit.rb -- The mysh internal exit command.
-  class InternalCommand
+  class Command
     #Add the exit command to the library.
-    add('exit', 'Exit mysh.') do |args|
+    COMMANDS.add('exit', 'Exit mysh.') do |args|
       raise MiniReadlineEOI
     end
 
-    add_alias('quit', 'exit')
+    COMMANDS.add_alias('quit', 'exit')
   end
 end
 

data/lib/mysh/commands/help.rb

@@ -4,20 +4,39 @@
 module Mysh
 
   #* help.rb -- The mysh internal help command.
-  class InternalCommand
+  class Command
 
-    HELP = Hash.new(lambda {|args| puts "No help found for #{args[0]}." })
+    # Help topics
+    HELP = CommandPool.new do |args|
+      puts "No help found for #{args[0].inspect}."
+    end
+
+    HELP.add("", "General help on mysh.") do |args|
+      show_file('help.txt')
+    end
+
+    HELP.add("math", "Help on mysh math functions.") do |args|
+      show_file('help_math.txt')
+    end
+
+    HELP.add("=", "Help on mysh ruby expressions.") do |args|
+      show_file('help_expr.txt')
+    end
+
+    HELP.add("help", "Help on mysh help.") do |args|
+      show_file('help_help.txt')
+    end
+
+    HELP.add_alias('?', 'help')
 
-    HELP[nil]    = lambda {|_args| show_file('help.txt') }
-    HELP['math'] = lambda {|_args| show_file('help_math.txt') }
-    HELP['ruby'] = lambda {|_args| show_file('help_ruby.txt') }
+    # The base help command.
+    desc = 'Display help information for mysh with an optional topic.'
 
-    #Add the exit command to the library.
-    add('help', 'Display help information for mysh.') do |args|
-      instance_exec(args, &HELP[args[0]])
+    COMMANDS.add('help <topic>', desc) do |args|
+      HELP[args[0] || ""].execute(args)
     end
 
-    add_alias('?', 'help')
+    COMMANDS.add_alias('? <topic>', 'help')
 
   end
 

data/lib/mysh/commands/help.txt

@@ -1,5 +1,9 @@
 mysh (MY ruby SHell) version: {{ Mysh::VERSION }}
 
+The mysh is a shell program inspired by the Ruby programming language in the
+same way the csh was inspired by the "C" programming language. The name rsh
+was already widely in use so it was mysh for some extra ego.
+
 In mysh, commands fall into one of three broad categories. There are:
 
 1) Ruby expressions:
@@ -8,7 +12,7 @@ Any line beginning with an equals "=" sign will be evaluated as a Ruby
 expression. This allows the mysh command line to serve as a programming,
 debugging and super-calculator environment.
 
-For more information on ruby expressions use the 'help ruby' command.
+For more information on ruby expressions use the 'help =' command.
 
 Note: This environment includes support for advanced mathematical operations.
       For more information on this feature, use the 'help math' command.
@@ -20,7 +24,7 @@ the name of an internal command is processed internally by mysh.
 
 The following set of commands are supported:
 
-{{ format_items(InternalCommand.command_info).join("\n") }}
+{{ format_items(COMMANDS.command_info).join("\n") }}
 
 3) External commands:
 

data/lib/mysh/commands/{help_ruby.txt → help_expr.txt}

@@ -1,4 +1,4 @@
-mysh Ruby expression support summary
+mysh Ruby expression support summary:
 
 All command lines that begin with an equals ("=") sign are evaluated as Ruby
 expressions. Lines ending with a backslash character ("\") are continued on the

data/lib/mysh/commands/help_help.txt

@@ -0,0 +1,9 @@
+mysh Help command summary:
+
+The help (or ?) command is used to get either general help about mysh
+or an optional specified topic.
+
+The available help topics are:
+
+{{ format_items(HELP.command_info).join("\n") }}
+

data/lib/mysh/commands/help_math.txt

@@ -1,4 +1,4 @@
-mysh Math support summary
+mysh Math support summary:
 
 The Ruby expression execution environment has direct access to many advanced
 mathematical functions and values.
@@ -8,43 +8,36 @@ For example, to compute the cosine of 3.141592653589793 use:
   mysh> =cos(PI)
   -1.0
 
-Method     Returns Description
-=======    ======= ================================================
-acos(x)    Float   Computes the arc cosine of x. Returns 0..PI.
-acosh(x)   Float   Computes the inverse hyperbolic cosine of x.
-asin(x)    Float   Computes the arc sine of x. Returns -PI/2..PI/2.
-asinh(x)   Float   Computes the inverse hyperbolic sine of x.
-atan(x)    Float   Computes the arc tangent of x. Returns -PI/2..PI/2.
-atan2(y,x) Float   Computes the arc tangent given y and x.
-                   Returns a Float in the range -PI..PI.
-atanh(x)   Float   Computes the inverse hyperbolic tangent of x.
-cbrt(x)    Float   Returns the cube root of x.
-cos(x)     Float   Computes the cosine of x (expressed in radians).
-                   Returns a Float in the range -1.0..1.0.
-cosh(x)    Float   Computes the hyperbolic cosine of x (expressed in radians).
-erf(x)     Float   Calculates the error function of x.
-erfc(x)    Float   Calculates the complementary error function of x.
-exp(x)     Float   Returns e**x.
-frexp(x)   Array   Returns a two-element array containing the normalized
-                   fraction (a Float) and exponent (a Fixnum) of x.
-gamma(x)   Float   Calculates the gamma function of x.
-hypot(x,y) Float   Returns sqrt(x**2 + y**2), the hypotenuse of a right-angled
-                   triangle with sides x and y.
-ldexp(m,e) Float   Returns the value of m*(2**e). Where m is the mantissa and
-                   e is the base two exponent.
-lgamma(x)  Array   Returns a two-element array containing the log of the
-                   gamma of x and the sign of gamma of x.
-log(x)     Float   Computes the natural log of x.
-log(x,B)   Float   Computes the base B log of x.
-log10(x)   Float   Returns the base 10 logarithm of x.
-log2(x)    Float   Returns the base 2 logarithm of x.
-sin(x)     Float   Computes the sine of x (expressed in radians).
-                   Returns a Float in the range -1.0..1.0.
-sinh(x)    Float   Computes the hyperbolic sine of x (expressed in radians).
-sqrt(x)    Float   Returns the non-negative square root of x.
-tan(x)     Float   Computes the tangent of x (expressed in radians).
-tanh(x)    Float   Computes the hyperbolic tangent of x (expressed in radians).
+Method     Type  Description
+=======    ===== ================================================
+acos(x)    Float The arc cosine of x. Returns 0..PI.
+acosh(x)   Float The inverse hyperbolic cosine of x.
+asin(x)    Float The arc sine of x. Returns -PI/2..PI/2.
+asinh(x)   Float The inverse hyperbolic sine of x.
+atan(x)    Float The arc tangent of x. Returns -PI/2..PI/2.
+atan2(y,x) Float The arc tangent given y and x. Returns -PI..PI.
+atanh(x)   Float The inverse hyperbolic tangent of x.
+cbrt(x)    Float The cube root of x.
+cos(x)     Float The cosine of x (in radians). Returns -1.0..1.0.
+cosh(x)    Float The hyperbolic cosine of x (in radians).
+erf(x)     Float The error function of x.
+erfc(x)    Float The complementary error function of x.
+exp(x)     Float Raise e to the xth. (e**x).
+frexp(x)   Array Extracts a two-element array containing [fraction, exponent].
+gamma(x)   Float The gamma function of x.
+hypot(x,y) Float The hypotenuse of a right-angled triangle with sides x & y.
+ldexp(f,e) Float Builds a value where f is the fraction and e is the exponent.
+lgamma(x)  Array Builds a two-element array [ln(gamma(x)), sign(gamma(x))]
+log(x)     Float The natural log of x.
+log(x,B)   Float The base B log of x.
+log10(x)   Float The base 10 logarithm of x.
+log2(x)    Float The base 2 logarithm of x.
+sin(x)     Float The sine of x (in radians). Returns -1.0..1.0.
+sinh(x)    Float The hyperbolic sine of x (in radians).
+sqrt(x)    Float The non-negative square root of x.
+tan(x)     Float The tangent of x (in radians).
+tanh(x)    Float The hyperbolic tangent of x (in radians).
 
-PI         Float   The value 3.141592653589793
-E          Float   The value 2.718281828459045
+E          Float The value 2.718281828459045
+PI         Float The value 3.141592653589793
 

data/lib/mysh/commands/history.rb

@@ -4,9 +4,9 @@
 module Mysh
 
   #* history.rb -- The mysh internal history command.
-  class InternalCommand
+  class Command
     #Add the exit command to the library.
-    add('history', 'Display the mysh command history.') do |args|
+    COMMANDS.add('history', 'Display the mysh command history.') do |args|
       history = Mysh.input.history
 
       #The history command should not be part of the history.
@@ -15,7 +15,7 @@ module Mysh
       puts history
     end
 
-    add_alias('!', 'history')
+    COMMANDS.add_alias('!', 'history')
   end
 end
 

data/lib/mysh/internal.rb

@@ -1,12 +1,13 @@
 # coding: utf-8
 
+require_relative 'commands/command_path'
+require_relative 'support/frame'
+require_relative 'support/command_pool'
 require_relative 'support/manage'
 require_relative 'support/parse'
 require_relative 'support/format'
-require_relative 'support/frame'
 require_relative 'support/decorate'
-require_relative 'commands/command_path'
 require_relative 'support/handlebars'
 
 #Load up the internal commands!
-Dir[Mysh::InternalCommand::COMMAND_PATH + '*.rb'].each {|file| require file }
+Dir[Mysh::Command::COMMAND_PATH + '*.rb'].each {|file| require file }

data/lib/mysh/support/command_pool.rb

@@ -0,0 +1,54 @@
+# coding: utf-8
+
+#* support/command_pool.rb -- A managed hash of mysh commands.
+module Mysh
+
+  #* support/command_pool.rb -- A managed hash of mysh commands.
+  class CommandPool
+
+    #Create a new command pool
+    def initialize(&default_action)
+      @pool = {}
+
+      if default_action
+        @pool.default = Command.new("", "", &default_action)
+      end
+    end
+
+    #Get a command.
+    def [](index)
+      @pool[index]
+    end
+
+    #Add a command.
+    def add(name, description, &action)
+      split_name = name.split[0] || ""
+
+      @pool[split_name] = Command.new(name, description, &action)
+    end
+
+    #Add an alias for an existing command.
+    def add_alias(new_name, old_name)
+      unless (command = @pool[old_name])
+        fail "Error adding alias #{new_name} for #{old_name}"
+      end
+
+      split_name = new_name.split[0]
+
+      @pool[split_name] =
+        Command.new(new_name, command.description, &command.action)
+    end
+
+    #Get information on all commands.
+    def command_info
+      @pool
+        .values
+        .map  {|command| command.command_info }
+        .sort {|first, second| first[0] <=> second[0] }
+    end
+
+  end
+
+
+end
+

data/lib/mysh/support/decorate.rb

@@ -4,7 +4,7 @@
 module Mysh
 
   #The mysh internal file name beauty treatments.
-  class InternalCommand
+  class Command
 
     #Make the file name fit the local system.
     def decorate(name)

data/lib/mysh/support/format.rb

@@ -4,15 +4,7 @@
 module Mysh
 
   #The mysh internal command class level report formatting.
-  class InternalCommand
-
-    #Get information on all commands.
-    def self.command_info
-      @commands
-        .values
-        .map  {|command| command.command_info }
-        .sort {|first, second| first[0] <=> second[0] }
-    end
+  class Command
 
     #Display an array of items.
     def display_items(items)

data/lib/mysh/support/frame.rb

@@ -4,7 +4,7 @@
 module Mysh
 
   #The mysh internal command instance data and methods.
-  class InternalCommand
+  class Command
     #The name of the command.
     attr_reader :name
 

data/lib/mysh/support/handlebars.rb

@@ -4,7 +4,7 @@
 module Mysh
 
   #The mysh embedded ruby text formatting.
-  class InternalCommand
+  class Command
 
     #Process a string with embedded Ruby code.
     def expand_handlebars(str)

data/lib/mysh/support/manage.rb

@@ -4,31 +4,10 @@
 module Mysh
 
   #The mysh internal command class level data and methods.
-  class InternalCommand
+  class Command
 
     #Set up the command library hash.
-    @commands = {}
-
-    class << self
-      #The command library, a hash.
-      attr_reader :commands
-    end
-
-    #Add a command to the command library.
-    def self.add(name, description, &action)
-      @commands[name.split[0]] = new(name, description, &action)
-    end
-
-    #Add an alias for an existing command.
-    def self.add_alias(new_name, old_name)
-      unless (command = @commands[old_name])
-        fail "Error adding alias #{new_name} for #{old_name}"
-      end
-
-      @commands[new_name] = new(new_name.split[0],
-                                command.description,
-                                &command.action)
-    end
+    COMMANDS = CommandPool.new
 
     #Execute an internal command
     def self.execute(str)

data/lib/mysh/support/parse.rb

@@ -4,7 +4,7 @@
 module Mysh
 
   #The mysh internal command instance data and methods.
-  class InternalCommand
+  class Command
 
     #Parse a command string for use by commands.
     #<br>Endemic Code Smells
@@ -22,7 +22,7 @@ module Mysh
         end
       end
 
-      [@commands[result.shift], result]
+      [COMMANDS[result.shift], result]
     end
 
     private

data/lib/mysh/version.rb

@@ -2,7 +2,7 @@
 
 module Mysh
   #The version string of MY SHell.
-  VERSION = "0.1.13"
+  VERSION = "0.1.14"
 
   #A brief summary of this gem.
   SUMMARY = "mysh -- a Ruby inspired command shell."

data/tests/my_shell_tests.rb

@@ -13,34 +13,32 @@ class MyShellTester < Minitest::Test
 
   def test_that_module_entities_exists
     assert_equal(Module, Mysh.class)
-    assert_equal(Class,  Mysh::InternalCommand.class)
+    assert_equal(Class,  Mysh::Command.class)
     assert_equal(Class,  Mysh::ExecHost.class)
   end
 
   def test_for_internal_commands
-    assert(Mysh::InternalCommand.commands['exit'], "The exit command is missing.")
-    assert(Mysh::InternalCommand.commands['quit'], "The quit command is missing.")
+    assert(Mysh::Command::COMMANDS['exit'], "The exit command is missing.")
+    assert(Mysh::Command::COMMANDS['quit'], "The quit command is missing.")
 
-    assert(Mysh::InternalCommand.commands['history'], "The history command is missing.")
-    assert(Mysh::InternalCommand.commands['!'], "The ! command is missing.")
+    assert(Mysh::Command::COMMANDS['history'], "The history command is missing.")
+    assert(Mysh::Command::COMMANDS['!'], "The ! command is missing.")
 
-    assert(Mysh::InternalCommand.commands['help'], "The help command is missing.")
-    assert(Mysh::InternalCommand.commands['?'], "The ? command is missing.")
+    assert(Mysh::Command::COMMANDS['help'], "The help command is missing.")
+    assert(Mysh::Command::COMMANDS['?'], "The ? command is missing.")
 
-    assert(Mysh::InternalCommand.commands['cd'], "The cd command is missing.")
-    assert(Mysh::InternalCommand.commands['pwd'], "The pwd command is missing.")
+    assert(Mysh::Command::COMMANDS['cd'], "The cd command is missing.")
+    assert(Mysh::Command::COMMANDS['pwd'], "The pwd command is missing.")
 
-    assert_raises { Mysh::InternalCommand.add_alias('blam', 'shazzam') }
+    assert_raises { Mysh::Command::COMMANDS.add_alias('blam', 'shazzam') }
   end
 
   def test_handlebars
-    cmd = Mysh::InternalCommand.commands['help']
+    cmd = Mysh::Command::COMMANDS['help']
 
     assert_equal("ABC 123 DEF",
                  cmd.expand_handlebars("ABC {{ (1..3).to_a.join }} DEF"))
 
   end
 
-
-
 end

metadata

@@ -1,14 +1,14 @@
 --- !ruby/object:Gem::Specification
 name: mysh
 version: !ruby/object:Gem::Version
-  version: 0.1.13
+  version: 0.1.14
 platform: ruby
 authors:
 - Peter Camilleri
 autorequire: 
 bindir: bin
 cert_chain: []
-date: 2016-09-29 00:00:00.000000000 Z
+date: 2016-09-30 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: bundler
@@ -156,13 +156,15 @@ files:
 - lib/mysh/commands/exit.rb
 - lib/mysh/commands/help.rb
 - lib/mysh/commands/help.txt
+- lib/mysh/commands/help_expr.txt
+- lib/mysh/commands/help_help.txt
 - lib/mysh/commands/help_math.txt
-- lib/mysh/commands/help_ruby.txt
 - lib/mysh/commands/history.rb
 - lib/mysh/expression.rb
 - lib/mysh/external_ruby.rb
 - lib/mysh/internal.rb
 - lib/mysh/smart_source.rb
+- lib/mysh/support/command_pool.rb
 - lib/mysh/support/decorate.rb
 - lib/mysh/support/format.rb
 - lib/mysh/support/frame.rb