muck-services 0.1.10 → 0.1.11

data/config/solr/cores/en/conf/solrconfig.xml

@@ -1,311 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" ?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<config>
-  <!-- Set this to 'false' if you want solr to continue working after it has 
-       encountered an severe configuration error.  In a production environment, 
-       you may want solr to keep working even if one handler is mis-configured.
-
-       You may also set this to false using by setting the system property:
-         -Dsolr.abortOnConfigurationError=false
-     -->
-  <abortOnConfigurationError>${solr.abortOnConfigurationError:true}</abortOnConfigurationError>
-
-  <!-- Used to specify an alternate directory to hold all index data
-       other than the default ./data under the Solr home.
-       If replication is in use, this should match the replication configuration. -->
-  <dataDir>${solr.data.dir:../../../../../solr_indexes}/en</dataDir>
-
-   <!-- Values here affect all index writers and act as a default unless overridden. -->
-  <indexDefaults>
-    <useCompoundFile>false</useCompoundFile>
-    <mergeFactor>10</mergeFactor>
-    <maxBufferedDocs>1000</maxBufferedDocs>
-    <maxMergeDocs>2147483647</maxMergeDocs>
-    <maxFieldLength>10000</maxFieldLength>
-    <writeLockTimeout>1000</writeLockTimeout>
-    <commitLockTimeout>10000</commitLockTimeout>
-  </indexDefaults>
-    <!-- options specific to the main on-disk lucene index -->
-<!--
-  <mainIndex>
-    <useCompoundFile>false</useCompoundFile>
-    <mergeFactor>10</mergeFactor>
-    <maxBufferedDocs>1000</maxBufferedDocs>
-    <maxMergeDocs>2147483647</maxMergeDocs>
-    <maxFieldLength>10000</maxFieldLength>
-
-    <unlockOnStartup>false</unlockOnStartup>
-  </mainIndex>
--->
-    <!-- If true, unlock any held write or commit locks on startup. 
-         This defeats the locking mechanism that allows multiple
-         processes to safely access a lucene index, and should be
-         used with care. -->
-
-  <!-- the default high-performance update handler -->
-
-  <updateHandler class="solr.DirectUpdateHandler2">
-
-    <!-- A prefix of "solr." for class names is an alias that
-         causes solr to search appropriate packages, including
-         org.apache.solr.(search|update|request|core|analysis)
-     -->
-
-    <!-- autocommit pending docs if certain criteria are met 
-    <autoCommit> 
-      <maxDocs>10000</maxDocs>
-      <maxTime>1000</maxTime>
-    </autoCommit>
-    -->
-
-    <!-- The RunExecutableListener executes an external command.
-         exe - the name of the executable to run
-         dir - dir to use as the current working directory. default="."
-         wait - the calling thread waits until the executable returns. default="true"
-         args - the arguments to pass to the program.  default=nothing
-         env - environment variables to set.  default=nothing
-      -->
-    <!-- A postCommit event is fired after every commit or optimize command
-    <listener event="postCommit" class="solr.RunExecutableListener">
-      <str name="exe">snapshooter</str>
-      <str name="dir">solr/bin</str>
-      <bool name="wait">true</bool>
-      <arr name="args"> <str>arg1</str> <str>arg2</str> </arr>
-      <arr name="env"> <str>MYVAR=val1</str> </arr>
-    </listener>
-    -->
-    <!-- A postOptimize event is fired only after every optimize command, useful
-         in conjunction with index distribution to only distribute optimized indicies 
-    <listener event="postOptimize" class="solr.RunExecutableListener">
-      <str name="exe">snapshooter</str>
-      <str name="dir">solr/bin</str>
-      <bool name="wait">true</bool>
-    </listener>
-    -->
-
-  </updateHandler>
-
-
-  <query>
-    <!-- Maximum number of clauses in a boolean query... can affect
-        range or prefix queries that expand to big boolean
-        queries.  An exception is thrown if exceeded.  -->
-    <maxBooleanClauses>1024</maxBooleanClauses>
-
-    
-    <!-- Cache used by SolrIndexSearcher for filters (DocSets),
-         unordered sets of *all* documents that match a query.
-         When a new searcher is opened, its caches may be prepopulated
-         or "autowarmed" using data from caches in the old searcher.
-         autowarmCount is the number of items to prepopulate.  For LRUCache,
-         the autowarmed items will be the most recently accessed items.
-       Parameters:
-         class - the SolrCache implementation (currently only LRUCache)
-         size - the maximum number of entries in the cache
-         initialSize - the initial capacity (number of entries) of
-           the cache.  (seel java.util.HashMap)
-         autowarmCount - the number of entries to prepopulate from
-           and old cache.
-         -->
-    <filterCache
-      class="solr.LRUCache"
-      size="512"
-      initialSize="512"
-      autowarmCount="256"/>
-
-   <!-- queryResultCache caches results of searches - ordered lists of
-         document ids (DocList) based on a query, a sort, and the range
-         of documents requested.  -->
-    <queryResultCache
-      class="solr.LRUCache"
-      size="512"
-      initialSize="512"
-      autowarmCount="256"/>
-
-  <!-- documentCache caches Lucene Document objects (the stored fields for each document).
-       Since Lucene internal document ids are transient, this cache will not be autowarmed.  -->
-    <documentCache
-      class="solr.LRUCache"
-      size="512"
-      initialSize="512"
-      autowarmCount="0"/>
-
-    <!-- If true, stored fields that are not requested will be loaded lazily.
-
-    This can result in a significant speed improvement if the usual case is to
-    not load all stored fields, especially if the skipped fields are large compressed
-    text fields.
-    -->
-    <enableLazyFieldLoading>true</enableLazyFieldLoading>
-
-    <!-- Example of a generic cache.  These caches may be accessed by name
-         through SolrIndexSearcher.getCache(),cacheLookup(), and cacheInsert().
-         The purpose is to enable easy caching of user/application level data.
-         The regenerator argument should be specified as an implementation
-         of solr.search.CacheRegenerator if autowarming is desired.  -->
-    <!--
-    <cache name="myUserCache"
-      class="solr.LRUCache"
-      size="4096"
-      initialSize="1024"
-      autowarmCount="1024"
-      regenerator="org.mycompany.mypackage.MyRegenerator"
-      />
-    -->
-
-   <!-- An optimization that attempts to use a filter to satisfy a search.
-         If the requested sort does not include score, then the filterCache
-         will be checked for a filter matching the query. If found, the filter
-         will be used as the source of document ids, and then the sort will be
-         applied to that.
-    <useFilterForSortedQuery>true</useFilterForSortedQuery>
-   -->
-
-   <!-- An optimization for use with the queryResultCache.  When a search
-         is requested, a superset of the requested number of document ids
-         are collected.  For example, if a search for a particular query
-         requests matching documents 10 through 19, and queryWindowSize is 50,
-         then documents 0 through 50 will be collected and cached.  Any further
-         requests in that range can be satisfied via the cache.  -->
-    <queryResultWindowSize>10</queryResultWindowSize>
-
-    <!-- This entry enables an int hash representation for filters (DocSets)
-         when the number of items in the set is less than maxSize.  For smaller
-         sets, this representation is more memory efficient, more efficient to
-         iterate over, and faster to take intersections.  -->
-    <HashDocSet maxSize="3000" loadFactor="0.75"/>
-
-
-    <!-- boolToFilterOptimizer converts boolean clauses with zero boost
-         into cached filters if the number of docs selected by the clause exceeds
-         the threshold (represented as a fraction of the total index) -->
-    <boolTofilterOptimizer enabled="true" cacheSize="32" threshold=".05"/>
-
-
-    <!-- a newSearcher event is fired whenever a new searcher is being prepared
-         and there is a current searcher handling requests (aka registered). -->
-    <!-- QuerySenderListener takes an array of NamedList and executes a
-         local query request for each NamedList in sequence. -->
-    <!--
-    <listener event="newSearcher" class="solr.QuerySenderListener">
-      <arr name="queries">
-        <lst> <str name="q">solr</str> <str name="start">0</str> <str name="rows">10</str> </lst>
-        <lst> <str name="q">rocks</str> <str name="start">0</str> <str name="rows">10</str> </lst>
-      </arr>
-    </listener>
-    -->
-
-    <!-- a firstSearcher event is fired whenever a new searcher is being
-         prepared but there is no current registered searcher to handle
-         requests or to gain autowarming data from. -->
-    <!--
-    <listener event="firstSearcher" class="solr.QuerySenderListener">
-      <arr name="queries">
-        <lst> <str name="q">fast_warm</str> <str name="start">0</str> <str name="rows">10</str> </lst>
-      </arr>
-    </listener>
-    -->
-
-    <!-- If a search request comes in and there is no current registered searcher,
-         then immediately register the still warming searcher and use it.  If
-         "false" then all requests will block until the first searcher is done
-         warming. -->
-    <useColdSearcher>false</useColdSearcher>
-
-    <!-- Maximum number of searchers that may be warming in the background
-      concurrently.  An error is returned if this limit is exceeded. Recommend
-      1-2 for read-only slaves, higher for masters w/o cache warming. -->
-    <maxWarmingSearchers>4</maxWarmingSearchers>
-
-  </query>
-
-  <!-- 
-    Let the dispatch filter handler /select?qt=XXX
-    handleSelect=true will use consistent error handling for /select and /update
-    handleSelect=false will use solr1.1 style error formatting
-    -->
-  <requestDispatcher handleSelect="true" >
-    <!--Make sure your system has some authentication before enabling remote streaming!  -->
-    <requestParsers enableRemoteStreaming="true" multipartUploadLimitInKB="2048" />
-  </requestDispatcher>
-  
-      
-  <!-- requestHandler plugins... incoming queries will be dispatched to the
-     correct handler based on the qt (query type) param matching the
-     name of registered handlers.
-     The "standard" request handler is the default and will be used if qt
-     is not specified in the request.
-  -->
-  <requestHandler name="standard" class="solr.StandardRequestHandler" default="true">
-    <!-- default values for query parameters -->
-     <lst name="defaults">
-       <str name="echoParams">explicit</str>
-	   <str name="json.nl">map</str>
-       <!-- 
-       <int name="rows">10</int>
-       <str name="fl">*</str>
-       <str name="version">2.1</str>
-        -->
-     </lst>
-  </requestHandler>
-
-  <requestHandler name="mlt" class="solr.MoreLikeThisHandler">
-    <lst name="defaults">
-      <str name="mlt.fl">text</str>
-      <int name="mlt.mindf">1</int>
-    </lst>
-  </requestHandler>
-
-  <!-- Note how you can register the same handler multiple times with
-       different names (and different init parameters)
-    -->
-  <!-- Update request handler.  
-  
-       Note: Since solr1.1 requestHandlers requires a valid content type header if posted in 
-       the body. For example, curl now requires: -H 'Content-type:text/xml; charset=utf-8'
-       The response format differs from solr1.1 formatting and returns a standard error code.
-       
-       To enable solr1.1 behavior, remove the /update handler or change its path
-    -->
-  <requestHandler name="/update" class="solr.XmlUpdateRequestHandler" />
-
-  <!-- queryResponseWriter plugins... query responses will be written using the
-    writer specified by the 'wt' request parameter matching the name of a registered
-    writer.
-    The "standard" writer is the default and will be used if 'wt' is not specified 
-    in the request. XMLResponseWriter will be used if nothing is specified here.
-    The json, python, and ruby writers are also available by default.
-
-    <queryResponseWriter name="standard" class="org.apache.solr.request.XMLResponseWriter"/>
-    <queryResponseWriter name="json" class="org.apache.solr.request.JSONResponseWriter"/>
-    <queryResponseWriter name="python" class="org.apache.solr.request.PythonResponseWriter"/>
-    <queryResponseWriter name="ruby" class="org.apache.solr.request.RubyResponseWriter"/>
-
-    <queryResponseWriter name="custom" class="com.example.MyResponseWriter"/>
-  -->
-
-  <!-- XSLT response writer transforms the XML output by any xslt file found
-       in Solr's conf/xslt directory.  Changes to xslt files are checked for
-       every xsltCacheLifetimeSeconds.  
-   -->
-  <queryResponseWriter name="xslt" class="org.apache.solr.request.XSLTResponseWriter">
-    <int name="xsltCacheLifetimeSeconds">5</int>
-  </queryResponseWriter> 
-    
-</config>

data/config/solr/cores/en/conf/stopwords.txt

@@ -1,341 +0,0 @@
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#-----------------------------------------------------------------------
-# a couple of test stopwords to test that the words are really being
-# configured from this file:
-stopworda
-stopwordb
-
-#stopwords list i found on the internet
-a
-about
-above
-across
-after
-afterwards
-again
-against
-all
-almost
-alone
-along
-already
-also
-although
-always
-am
-among
-amongst
-amoungst
-amount
-an
-and
-another
-any
-anyhow
-anyone
-anything
-anyway
-anywhere
-are
-around
-as
-at
-back
-be
-became
-because
-become
-becomes
-becoming
-been
-before
-beforehand
-behind
-being
-below
-beside
-besides
-between
-beyond
-bill
-both
-bottom
-but
-by
-call
-can
-cannot
-cant
-co
-computer
-con
-could
-couldnt
-cry
-de
-describe
-detail
-do
-done
-down
-due
-during
-each
-eg
-eight
-either
-eleven
-else
-elsewhere
-empty
-enough
-etc
-even
-ever
-every
-everyone
-everything
-everywhere
-except
-few
-fifteen
-fify
-fill
-find
-fire
-first
-five
-for
-former
-formerly
-forty
-found
-four
-from
-front
-full
-further
-get
-give
-go
-had
-has
-hasnt
-have
-he
-hence
-her
-here
-hereafter
-hereby
-herein
-hereupon
-hers
-herself
-him
-himself
-his
-how
-however
-hundred
-i
-ie
-if
-in
-inc
-indeed
-interest
-into
-is
-it
-its
-itself
-keep
-last
-latter
-latterly
-least
-less
-ltd
-made
-many
-may
-me
-meanwhile
-might
-mill
-mine
-more
-moreover
-most
-mostly
-move
-much
-must
-my
-myself
-name
-namely
-neither
-never
-nevertheless
-next
-nine
-no
-nobody
-none
-noone
-nor
-not
-nothing
-now
-nowhere
-of
-off
-often
-on
-once
-one
-only
-onto
-or
-other
-others
-otherwise
-our
-ours
-ourselves
-out
-over
-own
-part
-per
-perhaps
-please
-put
-rather
-re
-same
-see
-seem
-seemed
-seeming
-seems
-serious
-several
-she
-should
-show
-side
-since
-sincere
-six
-sixty
-so
-some
-somehow
-someone
-something
-sometime
-sometimes
-somewhere
-still
-such
-system
-take
-ten
-than
-that
-the
-their
-them
-themselves
-then
-thence
-there
-thereafter
-thereby
-therefore
-therein
-thereupon
-these
-they
-thick
-thin
-third
-this
-those
-though
-three
-through
-throughout
-thru
-thus
-to
-together
-too
-top
-toward
-towards
-twelve
-twenty
-two
-un
-under
-until
-up
-upon
-us
-very
-via
-was
-we
-well
-were
-what
-whatever
-when
-whence
-whenever
-where
-whereafter
-whereas
-whereby
-wherein
-whereupon
-wherever
-whether
-which
-while
-whither
-who
-whoever
-whole
-whom
-whose
-why
-will
-with
-within
-without
-would
-yet
-you
-your
-yours
-yourself
-yourselves