mountain_view 0.0.1 → 0.0.2

data/test/dummy/config/environments/development.rb

@@ -1,37 +1,3 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # In the development environment your application's code is reloaded on
-  # every request. This slows down response time but is perfect for development
-  # since you don't have to restart the web server when you make code changes.
+Dummy::Application.configure do
   config.cache_classes = false
-
-  # Do not eager load code on boot.
-  config.eager_load = false
-
-  # Show full error reports and disable caching.
-  config.consider_all_requests_local       = true
-  config.action_controller.perform_caching = false
-
-  # Don't care if the mailer can't send.
-  config.action_mailer.raise_delivery_errors = false
-
-  # Print deprecation notices to the Rails logger.
-  config.active_support.deprecation = :log
-
-  # Raise an error on page load if there are pending migrations.
-  config.active_record.migration_error = :page_load
-
-  # Debug mode disables concatenation and preprocessing of assets.
-  # This option may cause significant delays in view rendering with a large
-  # number of complex assets.
-  config.assets.debug = true
-
-  # Adds additional error checking when serving assets at runtime.
-  # Checks for improperly declared sprockets dependencies.
-  # Raises helpful error messages.
-  config.assets.raise_runtime_errors = true
-
-  # Raises error for missing translations
-  # config.action_view.raise_on_missing_translations = true
 end

data/test/dummy/config/environments/production.rb

@@ -1,82 +1,3 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
+Dummy::Application.configure do
 
-  # Code is not reloaded between requests.
-  config.cache_classes = true
-
-  # Eager load code on boot. This eager loads most of Rails and
-  # your application in memory, allowing both threaded web servers
-  # and those relying on copy on write to perform better.
-  # Rake tasks automatically ignore this option for performance.
-  config.eager_load = true
-
-  # Full error reports are disabled and caching is turned on.
-  config.consider_all_requests_local       = false
-  config.action_controller.perform_caching = true
-
-  # Enable Rack::Cache to put a simple HTTP cache in front of your application
-  # Add `rack-cache` to your Gemfile before enabling this.
-  # For large-scale production use, consider using a caching reverse proxy like nginx, varnish or squid.
-  # config.action_dispatch.rack_cache = true
-
-  # Disable Rails's static asset server (Apache or nginx will already do this).
-  config.serve_static_assets = false
-
-  # Compress JavaScripts and CSS.
-  config.assets.js_compressor = :uglifier
-  # config.assets.css_compressor = :sass
-
-  # Do not fallback to assets pipeline if a precompiled asset is missed.
-  config.assets.compile = false
-
-  # Generate digests for assets URLs.
-  config.assets.digest = true
-
-  # `config.assets.precompile` has moved to config/initializers/assets.rb
-
-  # Specifies the header that your server uses for sending files.
-  # config.action_dispatch.x_sendfile_header = "X-Sendfile" # for apache
-  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for nginx
-
-  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
-  # config.force_ssl = true
-
-  # Set to :debug to see everything in the log.
-  config.log_level = :info
-
-  # Prepend all log lines with the following tags.
-  # config.log_tags = [ :subdomain, :uuid ]
-
-  # Use a different logger for distributed setups.
-  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
-
-  # Use a different cache store in production.
-  # config.cache_store = :mem_cache_store
-
-  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
-  # config.action_controller.asset_host = "http://assets.example.com"
-
-  # Precompile additional assets.
-  # application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
-  # config.assets.precompile += %w( search.js )
-
-  # Ignore bad email addresses and do not raise email delivery errors.
-  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
-  # config.action_mailer.raise_delivery_errors = false
-
-  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
-  # the I18n.default_locale when a translation cannot be found).
-  config.i18n.fallbacks = true
-
-  # Send deprecation notices to registered listeners.
-  config.active_support.deprecation = :notify
-
-  # Disable automatic flushing of the log to improve performance.
-  # config.autoflush_log = false
-
-  # Use default logging formatter so that PID and timestamp are not suppressed.
-  config.log_formatter = ::Logger::Formatter.new
-
-  # Do not dump schema after migrations.
-  config.active_record.dump_schema_after_migration = false
 end

data/test/dummy/config/environments/test.rb

@@ -1,39 +1,3 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
+Dummy::Application.configure do
 
-  # The test environment is used exclusively to run your application's
-  # test suite. You never need to work with it otherwise. Remember that
-  # your test database is "scratch space" for the test suite and is wiped
-  # and recreated between test runs. Don't rely on the data there!
-  config.cache_classes = true
-
-  # Do not eager load code on boot. This avoids loading your whole application
-  # just for the purpose of running a single test. If you are using a tool that
-  # preloads Rails for running tests, you may have to set it to true.
-  config.eager_load = false
-
-  # Configure static asset server for tests with Cache-Control for performance.
-  config.serve_static_assets  = true
-  config.static_cache_control = 'public, max-age=3600'
-
-  # Show full error reports and disable caching.
-  config.consider_all_requests_local       = true
-  config.action_controller.perform_caching = false
-
-  # Raise exceptions instead of rendering exception templates.
-  config.action_dispatch.show_exceptions = false
-
-  # Disable request forgery protection in test environment.
-  config.action_controller.allow_forgery_protection = false
-
-  # Tell Action Mailer not to deliver emails to the real world.
-  # The :test delivery method accumulates sent emails in the
-  # ActionMailer::Base.deliveries array.
-  config.action_mailer.delivery_method = :test
-
-  # Print deprecation notices to the stderr.
-  config.active_support.deprecation = :stderr
-
-  # Raises error for missing translations
-  # config.action_view.raise_on_missing_translations = true
 end

data/test/dummy/config/initializers/assets.rb

@@ -1,8 +1,8 @@
 # Be sure to restart your server when you modify this file.
 
 # Version of your assets, change this if you want to expire all your assets.
-Rails.application.config.assets.version = '1.0'
+Dummy::Application.config.assets.version = '1.0'
 
 # Precompile additional assets.
 # application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
-# Rails.application.config.assets.precompile += %w( search.js )
+# Dummy::Application.config.assets.precompile += %w( search.js )

data/test/dummy/config/initializers/cookies_serializer.rb

@@ -1,3 +1,3 @@
 # Be sure to restart your server when you modify this file.
 
-Rails.application.config.action_dispatch.cookies_serializer = :json
+Dummy::Application.config.action_dispatch.cookies_serializer = :json

data/test/dummy/config/initializers/filter_parameter_logging.rb

@@ -1,4 +1,4 @@
 # Be sure to restart your server when you modify this file.
 
 # Configure sensitive parameters which will be filtered from the log file.
-Rails.application.config.filter_parameters += [:password]
+Dummy::Application.config.filter_parameters += [:password]

data/test/dummy/config/initializers/secret_token.rb

@@ -0,0 +1,7 @@
+config = Rails.application.config
+
+if Rails.version < "4"
+  config.secret_token = "9d76a23b9db93c4389e77a2df463b465330736159192f69cf79a862eb3aa2d2cc002dd28ed5c2a8391cba8fb5dc0d93ec36a1a42c6e772276518c4e3b26f18b7"
+else
+  config.secret_key_base = "9d76a23b9db93c4389e77a2df463b465330736159192f69cf79a862eb3aa2d2cc002dd28ed5c2a8391cba8fb5dc0d93ec36a1a42c6e772276518c4e3b26f18b7"
+end

data/test/dummy/config/initializers/session_store.rb

@@ -1,3 +1,3 @@
 # Be sure to restart your server when you modify this file.
 
-Rails.application.config.session_store :cookie_store, key: '_dummy_session'
+Dummy::Application.config.session_store :cookie_store, key: '_dummy_session'

data/test/dummy/config/routes.rb

@@ -1,9 +1,11 @@
-Rails.application.routes.draw do
+Dummy::Application.routes.draw do
+  mount MountainView::Engine => "/mountain_view"
+
   # The priority is based upon order of creation: first created -> highest priority.
   # See how all your routes lay out with "rake routes".
 
   # You can have the root of your site routed with "root"
-  root 'home#index'
+  root to: 'home#index'
 
   # Example of regular route:
   #   get 'products/:id' => 'catalog#view'