motion-yapper 0.0.3 → 0.1.0

data/vendor/Pods/BuildHeaders/YapDatabase/YapDatabaseRelationshipOptions.h

@@ -1,59 +0,0 @@
-#import <Foundation/Foundation.h>
-
-/**
- * Welcome to YapDatabase!
- *
- * The project page has a wealth of documentation if you have any questions.
- * https://github.com/yaptv/YapDatabase
- *
- * If you're new to the project you may want to visit the wiki.
- * https://github.com/yaptv/YapDatabase/wiki
- *
- * The YapDatabaseRelationship extension allow you to create relationships between objects,
- * and configure automatic deletion rules.
- *
- * For tons of information about this extension, see the wiki article:
- * https://github.com/yaptv/YapDatabase/wiki/Relationships
-**/
-
-@interface YapDatabaseRelationshipOptions : NSObject <NSCopying>
-
-/**
- * You can optionally completely disable the YapDatabaseRelationshipProtocol.
- * 
- * If you don't use it at all (i.e. you manually manage all graph edges),
- * then disabling the protocol, and its related processing, can reduce overhead.
- *
- * The default value is NO.
-**/
-@property (nonatomic, assign, readwrite) BOOL disableYapDatabaseRelationshipNodeProtocol;
-
-/**
- * You can configure the extension to pre-filter all but a subset of collections.
- *
- * The primary motivation for this is to reduce the overhead when populating the graph.
- * That is, when you first create the relationship extension, it will automatically enumerate all objects
- * in the database and check to see if any of them implement the YapDatabaseRelationshipNode protocol.
- * If there is only a single collection which includes objects implementing the YapDatabaseRelationshipNode protoco,
- * then you could specify that collection here. So when the extension first populates itself,
- * it will enumerate over just the allowedCollections, as opposed to enumerating over all collections.
- * And enumerating a small subset of the entire database during graph population can improve speed,
- * especially with larger databases.
- * 
- * In addition to reducing the overhead when first populating the graph,
- * the allowedCollections will pre-filter while you're making changes to the database.
- * So if you add a new object to the database, and the associated collection isn't in allowedCollections,
- * then the extension will skip any associated processing that would normally occur. (Things like checking to see
- * if the object implements the YapDatabaseRelationshipNode protocol, and checking to see if there were previously
- * any associated protocol edges for the object.)
- *
- * For all rows whose collection is in the allowedCollections, the extension works normally.
- *
- * Note: If you disable the YapDatabaseRelationshipNode protocol, then this configuration option is ignored
- * because it already skips all associated processing.
- *
- * The default value is nil.
-**/
-@property (nonatomic, copy, readwrite) NSSet *allowedCollections;
-
-@end

data/vendor/Pods/BuildHeaders/YapDatabase/YapDatabaseRelationshipPrivate.h

@@ -1,125 +0,0 @@
-#import <Foundation/Foundation.h>
-
-#import "YapDatabase.h"
-#import "YapDatabaseConnection.h"
-#import "YapDatabaseTransaction.h"
-
-#import "YapDatabaseRelationship.h"
-#import "YapDatabaseRelationshipOptions.h"
-#import "YapDatabaseRelationshipConnection.h"
-#import "YapDatabaseRelationshipTransaction.h"
-
-#import "YapDatabasePrivate.h"
-#import "YapDatabaseExtensionPrivate.h"
-
-/**
- * This version number is stored in the yap2 table.
- * If there is a major re-write to this class, then the version number will be incremented,
- * and the class can automatically rebuild the table as needed.
-**/
-#define YAP_DATABASE_RELATIONSHIP_CLASS_VERSION 3
-
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-#pragma mark -
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-@interface YapDatabaseRelationship () {
-@public
-
-	int version;
-	YapDatabaseRelationshipOptions *options;
-}
-
-- (NSString *)tableName;
-
-/**
- * The dispatch queue for performing file deletion operations.
- * Note: This method is not thread-safe, as it expects to only be invoked from within a read-write transaction.
-**/
-- (dispatch_queue_t)fileManagerQueue;
-
-@end
-
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-#pragma mark -
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-@interface YapDatabaseRelationshipOptions () {
-@public
-	
-	BOOL disableYapDatabaseRelationshipNodeProtocol;
-	NSSet *allowedCollections;
-}
-
-@end
-
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-#pragma mark -
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-@interface YapDatabaseRelationshipConnection () {
-@public
-	
-	__strong YapDatabaseRelationship *relationship;
-	__unsafe_unretained YapDatabaseConnection *databaseConnection;
-	
-	NSMutableDictionary *protocolChanges; // key:(NSNumber *)srcRowidNumber, value:(NSMutableArray *)edges
-	NSMutableDictionary *manualChanges;   // key:(NSString *)edgeName, value:(NSMutableArray *)edges
-	
-	NSMutableSet *inserted; // contains:(NSNumber *)rowidNumber
-	
-	NSMutableArray *deletedOrder; // contains:(NSNumber *)rowidNumber
-	NSMutableDictionary *deletedInfo; // key:(NSNumber *)rowidNumber, value:(YapCollectionKey *)collectionKey
-	
-	NSMutableSet *filesToDelete;
-	
-//	NSMutableSet *mutatedSomething;
-}
-
-- (id)initWithRelationship:(YapDatabaseRelationship *)relationship databaseConnection:(YapDatabaseConnection *)dbc;
-
-- (void)postRollbackCleanup;
-- (void)postCommitCleanup;
-
-- (sqlite3_stmt *)findManualEdgeStatement;
-- (sqlite3_stmt *)insertEdgeStatement;
-- (sqlite3_stmt *)updateEdgeStatement;
-- (sqlite3_stmt *)deleteEdgeStatement;
-- (sqlite3_stmt *)deleteEdgesWithNodeStatement;
-- (sqlite3_stmt *)enumerateAllDstFilePathStatement;
-- (sqlite3_stmt *)enumerateForSrcStatement;
-- (sqlite3_stmt *)enumerateForDstStatement;
-- (sqlite3_stmt *)enumerateForSrcNameStatement;
-- (sqlite3_stmt *)enumerateForDstNameStatement;
-- (sqlite3_stmt *)enumerateForNameStatement;
-- (sqlite3_stmt *)enumerateForSrcDstStatement;
-- (sqlite3_stmt *)enumerateForSrcDstNameStatement;
-- (sqlite3_stmt *)countForSrcNameExcludingDstStatement;
-- (sqlite3_stmt *)countForDstNameExcludingSrcStatement;
-- (sqlite3_stmt *)countForNameStatement;
-- (sqlite3_stmt *)countForSrcStatement;
-- (sqlite3_stmt *)countForSrcNameStatement;
-- (sqlite3_stmt *)countForDstStatement;
-- (sqlite3_stmt *)countForDstNameStatement;
-- (sqlite3_stmt *)countForSrcDstStatement;
-- (sqlite3_stmt *)countForSrcDstNameStatement;
-- (sqlite3_stmt *)removeAllStatement;
-- (sqlite3_stmt *)removeAllProtocolStatement;
-
-@end
-
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-#pragma mark -
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-@interface YapDatabaseRelationshipTransaction () {
-@protected
-	
-	__unsafe_unretained YapDatabaseRelationshipConnection *relationshipConnection;
-	__unsafe_unretained YapDatabaseReadTransaction *databaseTransaction;
-}
-
-- (id)initWithRelationshipConnection:(YapDatabaseRelationshipConnection *)relationshipConnection
-                 databaseTransaction:(YapDatabaseReadTransaction *)databaseTransaction;
-
-@end

data/vendor/Pods/BuildHeaders/YapDatabase/YapDatabaseRelationshipTransaction.h

@@ -1,384 +0,0 @@
-#import <Foundation/Foundation.h>
-
-#import "YapDatabaseExtensionTransaction.h"
-#import "YapDatabaseRelationshipEdge.h"
-
-/**
- * Welcome to YapDatabase!
- *
- * The project page has a wealth of documentation if you have any questions.
- * https://github.com/yaptv/YapDatabase
- *
- * If you're new to the project you may want to visit the wiki.
- * https://github.com/yaptv/YapDatabase/wiki
- *
- * The YapDatabaseRelationship extension allow you to create relationships between objects,
- * and configure automatic deletion rules.
- *
- * For tons of information about this extension, see the wiki article:
- * https://github.com/yaptv/YapDatabase/wiki/Relationships
-**/
-
-@interface YapDatabaseRelationshipTransaction : YapDatabaseExtensionTransaction
-
-#pragma mark Node Fetch
-
-/**
- * Shortcut for fetching the source object for the given edge.
- * Equivalent to:
- * 
- * [transaction objectForKey:edge.sourceKey inCollection:edge.sourceCollection];
-**/
-- (id)sourceNodeForEdge:(YapDatabaseRelationshipEdge *)edge;
-
-/**
- * Shortcut for fetching the destination object for the given edge.
- * Equivalent to:
- * 
- * [transaction objectForKey:edge.destinationKey inCollection:edge.destinationCollection];
-**/
-- (id)destinationNodeForEdge:(YapDatabaseRelationshipEdge *)edge;
-
-#pragma mark Enumerate
-
-/**
- * Enumerates every edge in the graph with the given name.
- * 
- * @param name
- *   The name of the edge (case sensitive).
-**/
-- (void)enumerateEdgesWithName:(NSString *)name
-                    usingBlock:(void (^)(YapDatabaseRelationshipEdge *edge, BOOL *stop))block;
-
-/**
- * Enumerates every edge that matches any parameters you specify.
- * You can specify any combination of the following:
- *
- * - name only
- * - sourceKey & sourceCollection only
- * - name + sourceKey & sourceCollection
- *
- * @param name (optional)
- *   The name of the edge (case sensitive).
- *
- * @param sourceKey (optional)
- *   The edge.sourceKey to match.
- * 
- * @param sourceCollection (optional)
- *   The edge.sourceCollection to match.
- * 
- * If you pass a non-nil sourceKey, and sourceCollection is nil,
- * then the sourceCollection is treated as the empty string, just like the rest of the YapDatabase framework.
-**/
-- (void)enumerateEdgesWithName:(NSString *)name
-                     sourceKey:(NSString *)sourceKey
-                    collection:(NSString *)sourceCollection
-                    usingBlock:(void (^)(YapDatabaseRelationshipEdge *edge, BOOL *stop))block;
-
-/**
- * Enumerates every edge that matches any parameters you specify.
- * You can specify any combination of the following:
- *
- * - name only
- * - destinationKey & destinationCollection only
- * - name + destinationKey & destinationCollection
- *
- * @param name (optional)
- *   The name of the edge (case sensitive).
- *
- * @param destinationKey (optional)
- *   The edge.destinationKey to match.
- * 
- * @param destinationCollection (optional)
- *   The edge.destinationCollection to match.
- * 
- * If you pass a non-nil destinationKey, and destinationCollection is nil,
- * then the destinationCollection is treated as the empty string, just like the rest of the YapDatabase framework.
-**/
-- (void)enumerateEdgesWithName:(NSString *)name
-                destinationKey:(NSString *)destinationKey
-                    collection:(NSString *)destinationCollection
-                    usingBlock:(void (^)(YapDatabaseRelationshipEdge *edge, BOOL *stop))block;
-
-/**
- * Enumerates every edge that matches any parameters you specify.
- * You can specify any combination of the following:
- *
- * - name only
- * - destinationFilePath
- * - name + destinationFilePath
- *
- * @param name (optional)
- *   The name of the edge (case sensitive).
- *
- * @param destinationFilePath (optional)
- *   The edge.destinationFilePath to match.
-**/
-- (void)enumerateEdgesWithName:(NSString *)name
-           destinationFilePath:(NSString *)destinationFilePath
-                    usingBlock:(void (^)(YapDatabaseRelationshipEdge *edge, BOOL *stop))block;
-
-/**
- * Enumerates every edge that matches any parameters you specify.
- * You can specify any combination of the following:
- *
- * - name only
- * - sourceKey & sourceCollection only
- * - destinationKey & destinationCollection only
- * - name + sourceKey & sourceCollection
- * - name + destinationKey & destinationCollection
- * - name + sourceKey & sourceCollection + destinationKey & destinationCollection
- *
- * @param name (optional)
- *   The name of the edge (case sensitive).
- *
- * @param sourceKey (optional)
- *   The edge.sourceKey to match.
- *
- * @param sourceCollection (optional)
- *   The edge.sourceCollection to match.
- * 
- * @param destinationKey (optional)
- *   The edge.destinationKey to match.
- *
- * @param destinationCollection (optional)
- *   The edge.destinationCollection to match.
- *
- * If you pass a non-nil sourceKey, and sourceCollection is nil,
- * then the sourceCollection is treated as the empty string, just like the rest of the YapDatabase framework.
- * 
- * If you pass a non-nil destinationKey, and destinationCollection is nil,
- * then the destinationCollection is treated as the empty string, just like the rest of the YapDatabase framework.
-**/
-- (void)enumerateEdgesWithName:(NSString *)name
-                     sourceKey:(NSString *)sourceKey
-                    collection:(NSString *)sourceCollection
-                destinationKey:(NSString *)destinationKey
-                    collection:(NSString *)destinationCollection
-                    usingBlock:(void (^)(YapDatabaseRelationshipEdge *edge, BOOL *stop))block;
-
-/**
- * Enumerates every edge that matches any parameters you specify.
- * You can specify any combination of the following:
- *
- * - name only
- * - sourceKey & sourceCollection only
- * - destinationKey & destinationCollection only
- * - name + sourceKey & sourceCollection
- * - name + destinationKey & destinationCollection
- * - name + sourceKey & sourceCollection + destinationKey & destinationCollection
- *
- * @param name (optional)
- *   The name of the edge (case sensitive).
- *
- * @param sourceKey (optional)
- *   The edge.sourceKey to match.
- *
- * @param sourceCollection (optional)
- *   The edge.sourceCollection to match.
- * 
- * @param destinationFilePath (optional)
- *   The edge.destinationFilePath to match.
- *
- * If you pass a non-nil sourceKey, and sourceCollection is nil,
- * then the sourceCollection is treated as the empty string, just like the rest of the YapDatabase framework.
-**/
-- (void)enumerateEdgesWithName:(NSString *)name
-                     sourceKey:(NSString *)sourceKey
-                    collection:(NSString *)sourceCollection
-           destinationFilePath:(NSString *)destinationFilePath
-                    usingBlock:(void (^)(YapDatabaseRelationshipEdge *edge, BOOL *stop))block;
-
-#pragma mark Count
-
-/**
- * Returns a count of every edge in the graph with the given name.
- * 
- * @param name
- *   The name of the edge (case sensitive).
-**/
-- (NSUInteger)edgeCountWithName:(NSString *)name;
-
-/**
- * Returns a count of every edge that matches any parameters you specify.
- * You can specify any combination of the following:
- *
- * - name only
- * - sourceKey & sourceCollection only
- * - name + sourceKey & sourceCollection
- *
- * @param name (optional)
- *   The name of the edge (case sensitive).
- *
- * @param sourceKey (optional)
- *   The edge.sourceKey to match.
- * 
- * @param sourceCollection (optional)
- *   The edge.sourceCollection to match.
- * 
- * If you pass a non-nil sourceKey, and sourceCollection is nil,
- * then the sourceCollection is treated as the empty string, just like the rest of the YapDatabase framework.
-**/
-- (NSUInteger)edgeCountWithName:(NSString *)name
-                      sourceKey:(NSString *)sourceKey
-                     collection:(NSString *)sourceCollection;
-
-/**
- * Returns a count of every edge that matches any parameters you specify.
- * You can specify any combination of the following:
- *
- * - name only
- * - destinationKey & destinationCollection only
- * - name + destinationKey & destinationCollection
- *
- * @param name (optional)
- *   The name of the edge (case sensitive).
- *
- * @param destinationKey (optional)
- *   The edge.destinationKey to match.
- * 
- * @param destinationCollection (optional)
- *   The edge.destinationCollection to match.
- * 
- * If you pass a non-nil destinationKey, and destinationCollection is nil,
- * then the destinationCollection is treated as the empty string, just like the rest of the YapDatabase framework.
-**/
-- (NSUInteger)edgeCountWithName:(NSString *)name
-                 destinationKey:(NSString *)destinationKey
-                     collection:(NSString *)destinationCollection;
-
-/**
- * Returns a count of every edge that matches any parameters you specify.
- * You can specify any combination of the following:
- *
- * - name only
- * - destinationFilePath
- * - name + destinationFilePath
- *
- * @param name (optional)
- *   The name of the edge (case sensitive).
- *
- * @param destinationFilePath (optional)
- *   The edge.destinationFilePath to match.
-**/
-- (NSUInteger)edgeCountWithName:(NSString *)name
-            destinationFilePath:(NSString *)destinationFilePath;
-
-/**
- * Returns a count of every edge that matches any parameters you specify.
- * You can specify any combination of the following:
- *
- * - name only
- * - sourceKey & sourceCollection only
- * - destinationKey & destinationCollection only
- * - name + sourceKey & sourceCollection
- * - name + destinationKey & destinationCollection
- * - name + sourceKey & sourceCollection + destinationKey & destinationCollection
- *
- * @param name (optional)
- *   The name of the edge (case sensitive).
- *
- * @param sourceKey (optional)
- *   The edge.sourceKey to match.
- *
- * @param sourceCollection (optional)
- *   The edge.sourceCollection to match.
- * 
- * @param destinationKey (optional)
- *   The edge.destinationKey to match.
- *
- * @param destinationCollection (optional)
- *   The edge.destinationCollection to match.
- *
- * If you pass a non-nil sourceKey, and sourceCollection is nil,
- * then the sourceCollection is treated as the empty string, just like the rest of the YapDatabase framework.
- * 
- * If you pass a non-nil destinationKey, and destinationCollection is nil,
- * then the destinationCollection is treated as the empty string, just like the rest of the YapDatabase framework.
-**/
-- (NSUInteger)edgeCountWithName:(NSString *)name
-                      sourceKey:(NSString *)sourceKey
-                     collection:(NSString *)sourceCollection
-                 destinationKey:(NSString *)destinationKey
-                     collection:(NSString *)destinationCollection;
-
-/**
- * Returns a count of every edge that matches any parameters you specify.
- * You can specify any combination of the following:
- *
- * - name only
- * - sourceKey & sourceCollection only
- * - destinationFilePath
- * - name + sourceKey & sourceCollection
- * - name + destinationFilePath
- * - name + sourceKey & sourceCollection + destinationFilePath
- *
- * @param name (optional)
- *   The name of the edge (case sensitive).
- *
- * @param sourceKey (optional)
- *   The edge.sourceKey to match.
- *
- * @param sourceCollection (optional)
- *   The edge.sourceCollection to match.
- * 
- * @param destinationFilePath (optional)
- *   The edge.destinationFilePath to match.
- *
- * If you pass a non-nil sourceKey, and sourceCollection is nil,
- * then the sourceCollection is treated as the empty string, just like the rest of the YapDatabase framework.
-**/
-- (NSUInteger)edgeCountWithName:(NSString *)name
-                      sourceKey:(NSString *)sourceKey
-                     collection:(NSString *)sourceCollection
-            destinationFilePath:(NSString *)destinationFilePath;
-
-@end
-
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-#pragma mark -
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-@interface YapDatabaseRelationshipTransaction (ReadWrite)
-
-#pragma mark Manual Edge Management
-
-/**
- * There are 2 ways to manage edges (add/remove) using the YapDatabaseRelationship extension:
- * 
- * - Manual edge management (via the methods below)
- * - Implement the YapDatabaseRelationshipNode protocol for some of your objects
- * 
- * For more information, see the wiki section "Edge Creation":
- * 
- * https://github.com/yaptv/YapDatabase/wiki/Relationships#wiki-edge_creation
-**/
-
-/**
- * The addEdge: method will add the manual edge (if it doesn't already exist).
- * Otherwise it will replace the the existing manual edge with the same name & srcKey/collection & dstKey/collection.
-**/
-- (void)addEdge:(YapDatabaseRelationshipEdge *)edge;
-
-- (void)removeEdge:(YapDatabaseRelationshipEdge *)edge;
-
-#pragma mark Force Processing
-
-/**
- * The extension automatically processes all changes to the graph at the end of a readwrite transaction.
- * This allows it to consolidate multiple changes into a single batch,
- * and also minimizes the impact of cascading delete rules, especially in the case where you'll be deleting
- * many of the objects manually at some later point within the transaction block.
- * 
- * However, there may be certain use cases where it is preferable to have the extension execute its rules in advance.
- * I'm struggling to come up with a really good example, so this semi-convoluted one will have to do:
- * 
- * You have a parent object, with a bunch of child objects that have edges to the parent.
- * You need to replace the parent, and for whatever reason the new parent has the same collection/key.
- * So instead of doing a setObject:forKey:inCollection:, you first delete the original parent.
- * At that point you can invoke this flush method, and it will properly delete any child objects.
- * Then you can safely set the new parent, knowing it won't accidentally inherit any children from the old parent.
-**/
-- (void)flush;
-
-@end