motion-firebase 1.0.5

data/lib/vendor/FacebookSDK.framework/Versions/A/DeprecatedHeaders/FBSession.h

@@ -0,0 +1,751 @@
+/*
+ * Copyright 2012 Facebook
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *    http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#import <Foundation/Foundation.h>
+#import <Accounts/Accounts.h>
+
+// up-front decl's
+@class FBSession;
+@class FBSessionTokenCachingStrategy;
+@class FBAccessTokenData;
+
+#define FB_SESSIONSTATETERMINALBIT (1 << 8)
+
+#define FB_SESSIONSTATEOPENBIT (1 << 9)
+
+/*
+ * Constants used by NSNotificationCenter for active session notification
+ */
+
+/*! NSNotificationCenter name indicating that a new active session was set */
+extern NSString *const FBSessionDidSetActiveSessionNotification;
+
+/*! NSNotificationCenter name indicating that an active session was unset */
+extern NSString *const FBSessionDidUnsetActiveSessionNotification;
+
+/*! NSNotificationCenter name indicating that the active session is open */
+extern NSString *const FBSessionDidBecomeOpenActiveSessionNotification;
+
+/*! NSNotificationCenter name indicating that there is no longer an open active session */
+extern NSString *const FBSessionDidBecomeClosedActiveSessionNotification;
+
+/*! 
+ @typedef FBSessionState enum
+ 
+ @abstract Passed to handler block each time a session state changes
+ 
+ @discussion
+ */
+typedef enum {
+    /*! One of two initial states indicating that no valid cached token was found */
+    FBSessionStateCreated                   = 0,
+    /*! One of two initial session states indicating that a cached token was loaded;
+     when a session is in this state, a call to open* will result in an open session,
+     without UX or app-switching*/
+    FBSessionStateCreatedTokenLoaded        = 1,
+    /*! One of three pre-open session states indicating that an attempt to open the session
+     is underway*/
+    FBSessionStateCreatedOpening            = 2,
+    
+    /*! Open session state indicating user has logged in or a cached token is available */
+    FBSessionStateOpen                      = 1 | FB_SESSIONSTATEOPENBIT,
+    /*! Open session state indicating token has been extended */
+    FBSessionStateOpenTokenExtended         = 2 | FB_SESSIONSTATEOPENBIT,
+    
+    /*! Closed session state indicating that a login attempt failed */
+    FBSessionStateClosedLoginFailed         = 1 | FB_SESSIONSTATETERMINALBIT, // NSError obj w/more info
+    /*! Closed session state indicating that the session was closed, but the users token 
+        remains cached on the device for later use */
+    FBSessionStateClosed                    = 2 | FB_SESSIONSTATETERMINALBIT, // "
+} FBSessionState;
+
+/*! helper macro to test for states that imply an open session */
+#define FB_ISSESSIONOPENWITHSTATE(state) (0 != (state & FB_SESSIONSTATEOPENBIT))
+
+/*! helper macro to test for states that are terminal */
+#define FB_ISSESSIONSTATETERMINAL(state) (0 != (state & FB_SESSIONSTATETERMINALBIT))
+
+/*! 
+ @typedef FBSessionLoginBehavior enum
+ 
+ @abstract 
+ Passed to open to indicate whether Facebook Login should allow for fallback to be attempted.
+ 
+ @discussion
+ Facebook Login authorizes the application to act on behalf of the user, using the user's 
+ Facebook account. Usually a Facebook Login will rely on an account maintained outside of 
+ the application, by the native Facebook application, the browser, or perhaps the device
+ itself. This avoids the need for a user to enter their username and password directly, and
+ provides the most secure and lowest friction way for a user to authorize the application to
+ interact with Facebook. If a Facebook Login is not possible, a fallback Facebook Login may be 
+ attempted, where the user is prompted to enter their credentials in a web-view hosted directly
+ by the application. 
+ 
+ The `FBSessionLoginBehavior` enum specifies whether to allow fallback, disallow fallback, or
+ force fallback login behavior. Most applications will use the default, which attempts a normal
+ Facebook Login, and only falls back if needed. In rare cases, it may be preferable to disallow
+ fallback Facebook Login completely, or to force a fallback login.
+ */
+typedef enum {
+    /*! Attempt Facebook Login, ask user for credentials if necessary */
+    FBSessionLoginBehaviorWithFallbackToWebView      = 0,
+    /*! Attempt Facebook Login, no direct request for credentials will be made */
+    FBSessionLoginBehaviorWithNoFallbackToWebView    = 1,
+    /*! Only attempt WebView Login; ask user for credentials */
+    FBSessionLoginBehaviorForcingWebView             = 2,
+    /*! Attempt Facebook Login, prefering system account and falling back to fast app switch if necessary */
+    FBSessionLoginBehaviorUseSystemAccountIfPresent  = 3,
+} FBSessionLoginBehavior;
+
+/*!
+ @typedef FBSessionDefaultAudience enum
+ 
+ @abstract
+ Passed to open to indicate which default audience to use for sessions that post data to Facebook.
+ 
+ @discussion
+ Certain operations such as publishing a status or publishing a photo require an audience. When the user
+ grants an application permission to perform a publish operation, a default audience is selected as the 
+ publication ceiling for the application. This enumerated value allows the application to select which
+ audience to ask the user to grant publish permission for.
+ */
+typedef enum {
+    /*! No audience needed; this value is useful for cases where data will only be read from Facebook */
+    FBSessionDefaultAudienceNone                = 0,
+    /*! Indicates that only the user is able to see posts made by the application */
+    FBSessionDefaultAudienceOnlyMe              = 10,
+    /*! Indicates that the user's friends are able to see posts made by the application */
+    FBSessionDefaultAudienceFriends             = 20,
+    /*! Indicates that all Facebook users are able to see posts made by the application */
+    FBSessionDefaultAudienceEveryone            = 30,
+} FBSessionDefaultAudience;
+
+/*!
+ @typedef FBSessionLoginType enum
+ 
+ @abstract
+ Used as the type of the loginType property in order to specify what underlying technology was used to
+ login the user.
+ 
+ @discussion
+ The FBSession object is an abstraction over five distinct mechanisms. This enum allows an application
+ to test for the mechanism used by a particular instance of FBSession. Usually the mechanism used for a
+ given login does not matter, however for certain capabilities, the type of login can impact the behavior
+ of other Facebook functionality.
+ */
+typedef enum {
+    /*! A login type has not yet been established */
+    FBSessionLoginTypeNone                      = 0,
+    /*! A system integrated account was used to log the user into the application */
+    FBSessionLoginTypeSystemAccount             = 1,
+    /*! The Facebook native application was used to log the user into the application */
+    FBSessionLoginTypeFacebookApplication       = 2,
+    /*! Safari was used to log the user into the application */
+    FBSessionLoginTypeFacebookViaSafari         = 3,
+    /*! A web view was used to log the user into the application */
+    FBSessionLoginTypeWebView                   = 4,
+    /*! A test user was used to create an open session */
+    FBSessionLoginTypeTestUser                  = 5,
+} FBSessionLoginType;
+
+/*! 
+ @typedef
+ 
+ @abstract Block type used to define blocks called by <FBSession> for state updates
+ @discussion See https://developers.facebook.com/docs/technical-guides/iossdk/errors/
+  for error handling best practices.
+ */
+typedef void (^FBSessionStateHandler)(FBSession *session, 
+                                       FBSessionState status, 
+                                       NSError *error);
+
+/*!
+ @typedef
+ 
+ @abstract Block type used to define blocks called by <[FBSession requestNewReadPermissions:completionHandler:]>
+ and <[FBSession requestNewPublishPermissions:defaultAudience:completionHandler:]>.
+ 
+ @discussion See https://developers.facebook.com/docs/technical-guides/iossdk/errors/
+ for error handling best practices.
+ */
+typedef void (^FBSessionRequestPermissionResultHandler)(FBSession *session,
+                                                        NSError *error);
+
+/*!
+ @typedef
+ 
+ @abstract Block type used to define blocks called by <[FBSession reauthorizeWithPermissions]>.
+ 
+ @discussion You should use the preferred FBSessionRequestPermissionHandler typedef rather than 
+ this synonym, which has been deprecated.
+ */
+typedef FBSessionRequestPermissionResultHandler FBSessionReauthorizeResultHandler __attribute__((deprecated));
+
+/*!
+ @typedef
+ 
+ @abstract Block type used to define blocks called for system credential renewals.
+ @discussion
+ */
+typedef void (^FBSessionRenewSystemCredentialsHandler)(ACAccountCredentialRenewResult result, NSError *error) ;
+
+/*!
+ @class FBSession
+
+ @abstract
+ The `FBSession` object is used to authenticate a user and manage the user's session. After
+ initializing a `FBSession` object the Facebook App ID and desired permissions are stored. 
+ Opening the session will initiate the authentication flow after which a valid user session
+ should be available and subsequently cached. Closing the session can optionally clear the
+ cache.
+ 
+ If an  <FBRequest> request requires user authorization then an `FBSession` object should be used.
+
+ 
+ @discussion
+ Instances of the `FBSession` class provide notification of state changes in the following ways:
+ 
+ 1. Callers of certain `FBSession` methods may provide a block that will be called
+ back in the course of state transitions for the session (e.g. login or session closed).
+ 
+ 2. The object supports Key-Value Observing (KVO) for property changes.
+ */
+@interface FBSession : NSObject
+
+/*!
+ @methodgroup Creating a session
+ */
+
+/*!
+ @method
+
+ @abstract 
+ Returns a newly initialized Facebook session with default values for the parameters
+ to <initWithAppID:permissions:urlSchemeSuffix:tokenCacheStrategy:>.
+ */
+- (id)init;
+
+/*!
+ @method
+ 
+ @abstract
+ Returns a newly initialized Facebook session with the specified permissions and other
+ default values for parameters to <initWithAppID:permissions:urlSchemeSuffix:tokenCacheStrategy:>.
+ 
+ @param permissions  An array of strings representing the permissions to request during the
+ authentication flow. A value of nil indicates basic permissions. The default is nil.
+ 
+ @discussion
+ It is required that any single permission request request (including initial log in) represent read-only permissions
+ or publish permissions only; not both. The permissions passed here should reflect this requirement.
+
+ */
+- (id)initWithPermissions:(NSArray*)permissions;
+
+/*!
+ @method
+ 
+ @abstract
+ Following are the descriptions of the arguments along with their
+ defaults when ommitted.
+ 
+ @param permissions  An array of strings representing the permissions to request during the
+ authentication flow. A value of nil indicates basic permissions. The default is nil.
+ @param appID  The Facebook App ID for the session. If nil is passed in the default App ID will be obtained from a call to <[FBSession defaultAppID]>. The default is nil.
+ @param urlSchemeSuffix  The URL Scheme Suffix to be used in scenarious where multiple iOS apps use one Facebook App ID. A value of nil indicates that this information should be pulled from the plist. The default is nil.
+ @param tokenCachingStrategy Specifies a key name to use for cached token information in NSUserDefaults, nil
+ indicates a default value of @"FBAccessTokenInformationKey".
+ 
+ @discussion
+ It is required that any single permission request request (including initial log in) represent read-only permissions
+ or publish permissions only; not both. The permissions passed here should reflect this requirement.
+ */
+- (id)initWithAppID:(NSString*)appID
+        permissions:(NSArray*)permissions
+    urlSchemeSuffix:(NSString*)urlSchemeSuffix
+ tokenCacheStrategy:(FBSessionTokenCachingStrategy*)tokenCachingStrategy;
+
+/*!
+ @method
+ 
+ @abstract
+ Following are the descriptions of the arguments along with their 
+ defaults when ommitted.
+ 
+ @param permissions  An array of strings representing the permissions to request during the
+ authentication flow. A value of nil indicates basic permissions. The default is nil.
+ @param defaultAudience  Most applications use FBSessionDefaultAudienceNone here, only specifying an audience when using reauthorize to request publish permissions.
+ @param appID  The Facebook App ID for the session. If nil is passed in the default App ID will be obtained from a call to <[FBSession defaultAppID]>. The default is nil.
+ @param urlSchemeSuffix  The URL Scheme Suffix to be used in scenarious where multiple iOS apps use one Facebook App ID. A value of nil indicates that this information should be pulled from the plist. The default is nil.
+ @param tokenCachingStrategy Specifies a key name to use for cached token information in NSUserDefaults, nil
+ indicates a default value of @"FBAccessTokenInformationKey".
+ 
+ @discussion
+ It is required that any single permission request request (including initial log in) represent read-only permissions
+ or publish permissions only; not both. The permissions passed here should reflect this requirement. If publish permissions
+ are used, then the audience must also be specified.
+ */
+- (id)initWithAppID:(NSString*)appID
+        permissions:(NSArray*)permissions
+    defaultAudience:(FBSessionDefaultAudience)defaultAudience
+    urlSchemeSuffix:(NSString*)urlSchemeSuffix
+ tokenCacheStrategy:(FBSessionTokenCachingStrategy*)tokenCachingStrategy;
+
+// instance readonly properties         
+
+/*! @abstract Indicates whether the session is open and ready for use. */
+@property(readonly) BOOL isOpen;                      
+
+/*! @abstract Detailed session state */
+@property(readonly) FBSessionState state;              
+
+/*! @abstract Identifies the Facebook app which the session object represents. */
+@property(readonly, copy) NSString *appID;              
+
+/*! @abstract Identifies the URL Scheme Suffix used by the session. This is used when multiple iOS apps share a single Facebook app ID. */
+@property(readonly, copy) NSString *urlSchemeSuffix;    
+
+/*! @abstract The access token for the session object. 
+    @discussion Deprecated. Use the `accessTokenData` property. */
+@property(readonly, copy) NSString *accessToken
+__attribute__((deprecated));
+
+/*! @abstract The expiration date of the access token for the session object. 
+    @discussion Deprecated. Use the `accessTokenData` property. */
+@property(readonly, copy) NSDate *expirationDate
+__attribute__((deprecated));
+
+/*! @abstract The permissions granted to the access token during the authentication flow. */
+@property(readonly, copy) NSArray *permissions;
+
+/*! @abstract Specifies the login type used to authenticate the user. 
+    @discussion Deprecated. Use the `accessTokenData` property. */
+@property(readonly) FBSessionLoginType loginType
+__attribute__((deprecated));
+
+/*! @abstract Gets the FBAccessTokenData for the session */
+@property(readonly, copy) FBAccessTokenData *accessTokenData;
+
+/*!
+ @methodgroup Instance methods
+ */
+
+/*! 
+ @method
+
+ @abstract Opens a session for the Facebook.
+
+ @discussion
+ A session may not be used with <FBRequest> and other classes in the SDK until it is open. If, prior 
+ to calling open, the session is in the <FBSessionStateCreatedTokenLoaded> state, then no UX occurs, and 
+ the session becomes available for use. If the session is in the <FBSessionStateCreated> state, prior
+ to calling open, then a call to open causes login UX to occur, either via the Facebook application
+ or via mobile Safari.
+ 
+ Open may be called at most once and must be called after the `FBSession` is initialized. Open must
+ be called before the session is closed. Calling an open method at an invalid time will result in
+ an exception. The open session methods may be passed a block that will be called back when the session
+ state changes. The block will be released when the session is closed.
+
+ @param handler A block to call with the state changes. The default is nil.
+*/
+- (void)openWithCompletionHandler:(FBSessionStateHandler)handler;
+
+/*! 
+ @method
+ 
+ @abstract Logs a user on to Facebook.
+ 
+ @discussion
+ A session may not be used with <FBRequest> and other classes in the SDK until it is open. If, prior 
+ to calling open, the session is in the <FBSessionStateCreatedTokenLoaded> state, then no UX occurs, and 
+ the session becomes available for use. If the session is in the <FBSessionStateCreated> state, prior
+ to calling open, then a call to open causes login UX to occur, either via the Facebook application
+ or via mobile Safari.
+ 
+ The method may be called at most once and must be called after the `FBSession` is initialized. It must
+ be called before the session is closed. Calling the method at an invalid time will result in
+ an exception. The open session methods may be passed a block that will be called back when the session
+ state changes. The block will be released when the session is closed.
+ 
+ @param behavior Controls whether to allow, force, or prohibit Facebook Login or Inline Facebook Login. The default
+ is to allow Facebook Login, with fallback to Inline Facebook Login.
+ @param handler A block to call with session state changes. The default is nil.
+ */
+- (void)openWithBehavior:(FBSessionLoginBehavior)behavior
+       completionHandler:(FBSessionStateHandler)handler;
+
+/*!
+ @method
+ 
+ @abstract Imports an existing access token and opens the session with it.
+ 
+ @discussion
+ The method attempts to open the session using an existing access token. No UX will occur. If 
+ successful, the session with be in an Open state and the method will return YES; otherwise, NO.
+ 
+ The method may be called at most once and must be called after the `FBSession` is initialized (see below).
+ It must be called before the session is closed. Calling the method at an invalid time will result in
+ an exception. The open session methods may be passed a block that will be called back when the session
+ state changes. The block will be released when the session is closed.
+ 
+ The initialized session must not have already been initialized from a cache (for example, you could use
+ the `[FBSessionTokenCachingStrategy nullCacheInstance]` instance). 
+ 
+ @param accessTokenData The token data. See `FBAccessTokenData` for construction methods.
+ @param handler A block to call with session state changes. The default is nil.
+ */
+- (BOOL)openFromAccessTokenData:(FBAccessTokenData *)accessTokenData completionHandler:(FBSessionStateHandler) handler;
+
+/*!
+ @abstract
+ Closes the local in-memory session object, but does not clear the persisted token cache.
+ */
+- (void)close;
+
+/*!
+ @abstract
+ Closes the in-memory session, and clears any persisted cache related to the session.
+*/
+- (void)closeAndClearTokenInformation;
+
+/*!
+ @abstract
+ Reauthorizes the session, with additional permissions.
+ 
+ @param permissions An array of strings representing the permissions to request during the
+ authentication flow. A value of nil indicates basic permissions. The default is nil.
+ @param behavior Controls whether to allow, force, or prohibit Facebook Login. The default
+ is to allow Facebook Login and fall back to Inline Facebook Login if needed.
+ @param handler A block to call with session state changes. The default is nil.
+ 
+ @discussion Methods and properties that specify permissions without a read or publish
+ qualification are deprecated; use of a read-qualified or publish-qualified alternative is preferred
+ (e.g. reauthorizeWithReadPermissions or reauthorizeWithPublishPermissions)
+ */
+- (void)reauthorizeWithPermissions:(NSArray*)permissions
+                          behavior:(FBSessionLoginBehavior)behavior
+                 completionHandler:(FBSessionReauthorizeResultHandler)handler
+ __attribute__((deprecated));
+
+/*!
+ @abstract
+ Reauthorizes the session, with additional permissions.
+ 
+ @param readPermissions An array of strings representing the permissions to request during the
+ authentication flow. A value of nil indicates basic permissions.
+ 
+ @param handler A block to call with session state changes. The default is nil.
+ 
+ @discussion This method is a deprecated alias of <[FBSession requestNewReadPermissions:completionHandler:]>. Consider
+ using <[FBSession requestNewReadPermissions:completionHandler:]>, which is preferred for readability.
+ */
+- (void)reauthorizeWithReadPermissions:(NSArray*)readPermissions
+                     completionHandler:(FBSessionReauthorizeResultHandler)handler
+__attribute__((deprecated));
+
+/*!
+ @abstract
+ Reauthorizes the session, with additional permissions.
+  
+ @param writePermissions An array of strings representing the permissions to request during the
+ authentication flow.
+ 
+ @param defaultAudience Specifies the audience for posts.
+ 
+ @param handler A block to call with session state changes. The default is nil.
+ 
+ @discussion This method is a deprecated alias of <[FBSession requestNewPublishPermissions:defaultAudience:completionHandler:]>.
+ Consider using <[FBSession requestNewPublishPermissions:defaultAudience:completionHandler:]>, which is preferred for readability.
+ */
+- (void)reauthorizeWithPublishPermissions:(NSArray*)writePermissions
+                          defaultAudience:(FBSessionDefaultAudience)defaultAudience
+                        completionHandler:(FBSessionReauthorizeResultHandler)handler
+__attribute__((deprecated));
+
+/*!
+ @abstract
+ Requests new or additional read permissions for the session.
+ 
+ @param readPermissions An array of strings representing the permissions to request during the
+ authentication flow. A value of nil indicates basic permissions.
+ 
+ @param handler A block to call with session state changes. The default is nil.
+ 
+ @discussion The handler, if non-nil, is called once the operation has completed or failed. This is in contrast to the
+ state completion handler used in <[FBSession openWithCompletionHandler:]> (and other `open*` methods) which is called 
+ for each state-change for the session.
+ */
+- (void)requestNewReadPermissions:(NSArray*)readPermissions
+                completionHandler:(FBSessionRequestPermissionResultHandler)handler;
+
+/*!
+ @abstract
+ Requests new or additional write permissions for the session.
+ 
+ @param writePermissions An array of strings representing the permissions to request during the
+ authentication flow.
+ 
+ @param defaultAudience Specifies the audience for posts.
+ 
+ @param handler A block to call with session state changes. The default is nil.
+ 
+ @discussion The handler, if non-nil, is called once the operation has completed or failed. This is in contrast to the
+ state completion handler used in <[FBSession openWithCompletionHandler:]> (and other `open*` methods) which is called 
+ for each state-change for the session.
+ */
+- (void)requestNewPublishPermissions:(NSArray*)writePermissions
+                     defaultAudience:(FBSessionDefaultAudience)defaultAudience
+                   completionHandler:(FBSessionRequestPermissionResultHandler)handler;
+
+/*!
+ @abstract
+ A helper method that is used to provide an implementation for
+ [UIApplicationDelegate application:openURL:sourceApplication:annotation:]. It should be invoked during
+ the Facebook Login flow and will update the session information based on the incoming URL.
+ 
+ @param url The URL as passed to [UIApplicationDelegate application:openURL:sourceApplication:annotation:].
+*/
+- (BOOL)handleOpenURL:(NSURL*)url;
+
+/*!
+ @abstract
+ A helper method that is used to provide an implementation for
+ [UIApplicationDelegate applicationDidBecomeActive:] to properly resolve session state for
+ the Facebook Login flow, specifically to support app-switch login.
+*/
+- (void)handleDidBecomeActive;
+
+/*!
+ @methodgroup Class methods
+ */
+
+/*!
+ @abstract
+ This is the simplest method for opening a session with Facebook. Using sessionOpen logs on a user,
+ and sets the static activeSession which becomes the default session object for any Facebook UI widgets
+ used by the application. This session becomes the active session, whether open succeeds or fails.
+ 
+ Note, if there is not a cached token available, this method will present UI to the user in order to 
+ open the session via explicit login by the user.
+ 
+ @param allowLoginUI    Sometimes it is useful to attempt to open a session, but only if
+ no login UI will be required to accomplish the operation. For example, at application startup it may not 
+ be disirable to transition to login UI for the user, and yet an open session is desired so long as a cached
+ token can be used to open the session. Passing NO to this argument, assures the method will not present UI
+ to the user in order to open the session.
+ 
+ @discussion
+ Returns YES if the session was opened synchronously without presenting UI to the user. This occurs
+ when there is a cached token available from a previous run of the application. If NO is returned, this indicates 
+ that the session was not immediately opened, via cache. However, if YES was passed as allowLoginUI, then it is 
+ possible that the user will login, and the session will become open asynchronously. The primary use for
+ this return value is to switch-on facebook capabilities in your UX upon startup, in the case were the session
+ is opened via cache.
+ */
++ (BOOL)openActiveSessionWithAllowLoginUI:(BOOL)allowLoginUI;
+
+/*!
+ @abstract
+ This is a simple method for opening a session with Facebook. Using sessionOpen logs on a user,
+ and sets the static activeSession which becomes the default session object for any Facebook UI widgets
+ used by the application. This session becomes the active session, whether open succeeds or fails.
+ 
+ @param permissions     An array of strings representing the permissions to request during the
+ authentication flow. A value of nil indicates basic permissions. A nil value specifies 
+ default permissions.
+  
+ @param allowLoginUI    Sometimes it is useful to attempt to open a session, but only if
+ no login UI will be required to accomplish the operation. For example, at application startup it may not 
+ be desirable to transition to login UI for the user, and yet an open session is desired so long as a cached
+ token can be used to open the session. Passing NO to this argument, assures the method will not present UI
+ to the user in order to open the session.
+
+ @param handler                 Many applications will benefit from notification when a session becomes invalid
+ or undergoes other state transitions. If a block is provided, the FBSession
+ object will call the block each time the session changes state.
+ 
+ @discussion
+ Returns true if the session was opened synchronously without presenting UI to the user. This occurs
+ when there is a cached token available from a previous run of the application. If NO is returned, this indicates 
+ that the session was not immediately opened, via cache. However, if YES was passed as allowLoginUI, then it is 
+ possible that the user will login, and the session will become open asynchronously. The primary use for
+ this return value is to switch-on facebook capabilities in your UX upon startup, in the case were the session
+ is opened via cache.
+ 
+ It is required that initial permissions requests represent read-only permissions only. If publish
+ permissions are needed, you may use reauthorizeWithPermissions to specify additional permissions as
+ well as an audience. Use of this method will result in a legacy fast-app-switch Facebook Login due to
+ the requirement to seperate read and publish permissions for newer applications. Methods and properties
+ that specify permissions without a read or publish qualification are deprecated; use of a read-qualified 
+ or publish-qualified alternative is preferred.
+ */
++ (BOOL)openActiveSessionWithPermissions:(NSArray*)permissions
+                            allowLoginUI:(BOOL)allowLoginUI
+                       completionHandler:(FBSessionStateHandler)handler
+ __attribute__((deprecated));
+
+/*!
+ @abstract
+ This is a simple method for opening a session with Facebook. Using sessionOpen logs on a user,
+ and sets the static activeSession which becomes the default session object for any Facebook UI widgets
+ used by the application. This session becomes the active session, whether open succeeds or fails.
+ 
+ @param readPermissions     An array of strings representing the read permissions to request during the
+ authentication flow. A value of nil indicates basic permissions. It is not allowed to pass publish
+ permissions to this method.
+ 
+ @param allowLoginUI    Sometimes it is useful to attempt to open a session, but only if
+ no login UI will be required to accomplish the operation. For example, at application startup it may not
+ be desirable to transition to login UI for the user, and yet an open session is desired so long as a cached
+ token can be used to open the session. Passing NO to this argument, assures the method will not present UI
+ to the user in order to open the session.
+ 
+ @param handler                 Many applications will benefit from notification when a session becomes invalid
+ or undergoes other state transitions. If a block is provided, the FBSession
+ object will call the block each time the session changes state.
+ 
+ @discussion
+ Returns true if the session was opened synchronously without presenting UI to the user. This occurs
+ when there is a cached token available from a previous run of the application. If NO is returned, this indicates
+ that the session was not immediately opened, via cache. However, if YES was passed as allowLoginUI, then it is
+ possible that the user will login, and the session will become open asynchronously. The primary use for
+ this return value is to switch-on facebook capabilities in your UX upon startup, in the case were the session
+ is opened via cache.
+ 
+ */
++ (BOOL)openActiveSessionWithReadPermissions:(NSArray*)readPermissions
+                                allowLoginUI:(BOOL)allowLoginUI
+                           completionHandler:(FBSessionStateHandler)handler;
+
+/*!
+ @abstract
+ This is a simple method for opening a session with Facebook. Using sessionOpen logs on a user,
+ and sets the static activeSession which becomes the default session object for any Facebook UI widgets
+ used by the application. This session becomes the active session, whether open succeeds or fails.
+ 
+ @param publishPermissions     An array of strings representing the publish permissions to request during the
+ authentication flow.
+ 
+ @param defaultAudience     Anytime an app publishes on behalf of a user, the post must have an audience (e.g. me, my friends, etc.) 
+ The default audience is used to notify the user of the cieling that the user agrees to grant to the app for the provided permissions.
+ 
+ @param allowLoginUI    Sometimes it is useful to attempt to open a session, but only if
+ no login UI will be required to accomplish the operation. For example, at application startup it may not
+ be desirable to transition to login UI for the user, and yet an open session is desired so long as a cached
+ token can be used to open the session. Passing NO to this argument, assures the method will not present UI
+ to the user in order to open the session.
+ 
+ @param handler                 Many applications will benefit from notification when a session becomes invalid
+ or undergoes other state transitions. If a block is provided, the FBSession
+ object will call the block each time the session changes state.
+ 
+ @discussion
+ Returns true if the session was opened synchronously without presenting UI to the user. This occurs
+ when there is a cached token available from a previous run of the application. If NO is returned, this indicates
+ that the session was not immediately opened, via cache. However, if YES was passed as allowLoginUI, then it is
+ possible that the user will login, and the session will become open asynchronously. The primary use for
+ this return value is to switch-on facebook capabilities in your UX upon startup, in the case were the session
+ is opened via cache.
+ 
+ */
++ (BOOL)openActiveSessionWithPublishPermissions:(NSArray*)publishPermissions
+                                defaultAudience:(FBSessionDefaultAudience)defaultAudience
+                                   allowLoginUI:(BOOL)allowLoginUI
+                              completionHandler:(FBSessionStateHandler)handler;
+
+/*!
+ @abstract
+ An application may get or set the current active session. Certain high-level components in the SDK
+ will use the activeSession to set default session (e.g. `FBLoginView`, `FBFriendPickerViewController`)
+ 
+ @discussion
+ If sessionOpen* is called, the resulting `FBSession` object also becomes the activeSession. If another
+ session was active at the time, it is closed automatically. If activeSession is called when no session
+ is active, a session object is instatiated and returned; in this case open must be called on the session
+ in order for it to be useable for communication with Facebook.
+ */
++ (FBSession*)activeSession;
+
+/*!
+ @abstract
+ An application may get or set the current active session. Certain high-level components in the SDK
+ will use the activeSession to set default session (e.g. `FBLoginView`, `FBFriendPickerViewController`)
+ 
+ @param session         The FBSession object to become the active session
+ 
+ @discussion
+ If an application prefers the flexibilility of directly instantiating a session object, an active
+ session can be set directly.
+ */
++ (FBSession*)setActiveSession:(FBSession*)session;
+
+/*!
+ @method
+ 
+ @abstract Set the default Facebook App ID to use for sessions. The app ID may be
+ overridden on a per session basis.
+ 
+ @param appID The default Facebook App ID to use for <FBSession> methods.
+ */
++ (void)setDefaultAppID:(NSString*)appID;
+
+/*!
+ @method
+ 
+ @abstract Get the default Facebook App ID to use for sessions. If not explicitly
+ set, the default will be read from the application's plist. The app ID may be
+ overridden on a per session basis.
+ */
++ (NSString*)defaultAppID;
+
+/*!
+ @method
+
+ @abstract Set the default url scheme suffix to use for sessions. The url
+ scheme suffix may be overridden on a per session basis.
+
+ @param urlSchemeSuffix The default url scheme suffix to use for <FBSession> methods.
+ */
++ (void)setDefaultUrlSchemeSuffix:(NSString*)urlSchemeSuffix;
+
+/*!
+ @method
+
+ @abstract Get the default url scheme suffix used for sessions.  If not
+ explicitly set, the default will be read from the application's plist. The
+ url scheme suffix may be overridden on a per session basis.
+ */
++ (NSString*)defaultUrlSchemeSuffix;
+
+/*!
+ @method
+ 
+ @abstract Issues an asychronous renewCredentialsForAccount call to the device Facebook account store.
+ 
+ @param handler The completion handler to call when the renewal is completed. The handler will be
+ invoked on the main thread.
+ 
+ @discussion This can be used to explicitly renew account credentials on iOS 6 devices and is provided
+ as a convenience wrapper around `[ACAccountStore renewCredentialsForAccount:completion]`. Note the
+ method will not issue the renewal call if the the Facebook account has not been set on the device, or
+ if access had not been granted to the account (though the handler wil receive an error).
+ 
+ This is safe to call (and will surface an error to the handler) on versions of iOS before 6 or if the user
+ logged in via Safari or Facebook SSO.
+*/
++ (void)renewSystemCredentials:(FBSessionRenewSystemCredentialsHandler)handler;
+@end