mongrel 1.1.4-x86-mswin32-60

data/examples/httpd.conf

@@ -0,0 +1,474 @@
+#
+# This is the main Apache HTTP server configuration file.  It contains the
+# configuration directives that give the server its instructions.
+# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
+# In particular, see 
+# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
+# for a discussion of each configuration directive.
+#
+# Do NOT simply read the instructions in here without understanding
+# what they do.  They're here only as hints or reminders.  If you are unsure
+# consult the online docs. You have been warned.  
+#
+# Configuration and logfile names: If the filenames you specify for many
+# of the server's control files begin with "/" (or "drive:/" for Win32), the
+# server will use that explicit path.  If the filenames do *not* begin
+# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
+# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
+# server as "/usr/local/apache2/logs/foo.log".
+
+#
+# ServerRoot: The top of the directory tree under which the server's
+# configuration, error, and log files are kept.
+#
+# Do not add a slash at the end of the directory path.  If you point
+# ServerRoot at a non-local disk, be sure to point the LockFile directive
+# at a local disk.  If you wish to share the same ServerRoot for multiple
+# httpd daemons, you will need to change at least LockFile and PidFile.
+#
+ServerRoot "/usr/local/apache2"
+
+#
+# Listen: Allows you to bind Apache to specific IP addresses and/or
+# ports, instead of the default. See also the <VirtualHost>
+# directive.
+#
+# Change this to Listen on specific IP addresses as shown below to 
+# prevent Apache from glomming onto all bound IP addresses.
+#
+#Listen 12.34.56.78:80
+Listen 8088
+
+#
+# Dynamic Shared Object (DSO) Support
+#
+# To be able to use the functionality of a module which was built as a DSO you
+# have to place corresponding `LoadModule' lines at this location so the
+# directives contained in it are actually available _before_ they are used.
+# Statically compiled modules (those listed by `httpd -l') do not need
+# to be loaded here.
+#
+# Example:
+# LoadModule foo_module modules/mod_foo.so
+#
+
+LoadModule deflate_module modules/mod_deflate.so
+LoadModule expires_module modules/mod_expires.so
+LoadModule headers_module modules/mod_headers.so
+LoadModule mime_magic_module modules/mod_mime_magic.so
+LoadModule proxy_module modules/mod_proxy.so
+LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
+LoadModule proxy_http_module modules/mod_proxy_http.so
+LoadModule rewrite_module modules/mod_rewrite.so
+LoadModule version_module modules/mod_version.so
+LoadModule vhost_alias_module modules/mod_vhost_alias.so
+
+<IfModule !mpm_netware_module>
+#
+# If you wish httpd to run as a different user or group, you must run
+# httpd as root initially and it will switch.  
+#
+# User/Group: The name (or #number) of the user/group to run httpd as.
+# It is usually good practice to create a dedicated user and group for
+# running httpd, as with most system services.
+#
+User www-data
+Group www-data
+</IfModule>
+
+# 'Main' server configuration
+#
+# The directives in this section set up the values used by the 'main'
+# server, which responds to any requests that aren't handled by a
+# <VirtualHost> definition.  These values also provide defaults for
+# any <VirtualHost> containers you may define later in the file.
+#
+# All of these directives may appear inside <VirtualHost> containers,
+# in which case these default settings will be overridden for the
+# virtual host being defined.
+#
+
+#
+# ServerAdmin: Your address, where problems with the server should be
+# e-mailed.  This address appears on some server-generated pages, such
+# as error documents.  e.g. admin@your-domain.com
+#
+ServerAdmin admin@SERVER
+
+#
+# ServerName gives the name and port that the server uses to identify itself.
+# This can often be determined automatically, but we recommend you specify
+# it explicitly to prevent problems during startup.
+#
+# If your host doesn't have a registered DNS name, enter its IP address here.
+#
+ServerName SERVER:8088
+
+#
+# DocumentRoot: The directory out of which you will serve your
+# documents. By default, all requests are taken from this directory, but
+# symbolic links and aliases may be used to point to other locations.
+#
+DocumentRoot "/usr/local/apache2/htdocs"
+
+#
+# Each directory to which Apache has access can be configured with respect
+# to which services and features are allowed and/or disabled in that
+# directory (and its subdirectories). 
+#
+# First, we configure the "default" to be a very restrictive set of 
+# features.  
+#
+<Directory />
+    Options FollowSymLinks
+    AllowOverride None
+    Order deny,allow
+    Deny from all
+</Directory>
+
+#
+# Note that from this point forward you must specifically allow
+# particular features to be enabled - so if something's not working as
+# you might expect, make sure that you have specifically enabled it
+# below.
+#
+
+#
+# This should be changed to whatever you set DocumentRoot to.
+#
+<Directory "/usr/local/apache2/htdocs">
+    #
+    # Possible values for the Options directive are "None", "All",
+    # or any combination of:
+    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
+    #
+    # Note that "MultiViews" must be named *explicitly* --- "Options All"
+    # doesn't give it to you.
+    #
+    # The Options directive is both complicated and important.  Please see
+    # http://httpd.apache.org/docs/2.2/mod/core.html#options
+    # for more information.
+    #
+    Options Indexes FollowSymLinks
+
+    #
+    # AllowOverride controls what directives may be placed in .htaccess files.
+    # It can be "All", "None", or any combination of the keywords:
+    #   Options FileInfo AuthConfig Limit
+    #
+    AllowOverride None
+
+    #
+    # Controls who can get stuff from this server.
+    #
+    Order allow,deny
+    Allow from all
+
+</Directory>
+
+#
+# DirectoryIndex: sets the file that Apache will serve if a directory
+# is requested.
+#
+<IfModule dir_module>
+    DirectoryIndex index.html
+</IfModule>
+
+#
+# The following lines prevent .htaccess and .htpasswd files from being 
+# viewed by Web clients. 
+#
+<FilesMatch "^\.ht">
+    Order allow,deny
+    Deny from all
+    Satisfy All
+</FilesMatch>
+
+#
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here.  If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+#
+ErrorLog logs/error_log
+
+#
+# LogLevel: Control the number of messages logged to the error_log.
+# Possible values include: debug, info, notice, warn, error, crit,
+# alert, emerg.
+#
+LogLevel warn
+
+<IfModule log_config_module>
+    #
+    # The following directives define some format nicknames for use with
+    # a CustomLog directive (see below).
+    #
+    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
+    LogFormat "%h %l %u %t \"%r\" %>s %b" common
+
+    <IfModule logio_module>
+      # You need to enable mod_logio.c to use %I and %O
+      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
+    </IfModule>
+
+    #
+    # The location and format of the access logfile (Common Logfile Format).
+    # If you do not define any access logfiles within a <VirtualHost>
+    # container, they will be logged here.  Contrariwise, if you *do*
+    # define per-<VirtualHost> access logfiles, transactions will be
+    # logged therein and *not* in this file.
+    #
+    CustomLog logs/access_log common
+
+    #
+    # If you prefer a logfile with access, agent, and referer information
+    # (Combined Logfile Format) you can use the following directive.
+    #
+    #CustomLog logs/access_log combined
+</IfModule>
+
+<IfModule alias_module>
+    #
+    # Redirect: Allows you to tell clients about documents that used to 
+    # exist in your server's namespace, but do not anymore. The client 
+    # will make a new request for the document at its new location.
+    # Example:
+    # Redirect permanent /foo http://www.example.com/bar
+
+    #
+    # Alias: Maps web paths into filesystem paths and is used to
+    # access content that does not live under the DocumentRoot.
+    # Example:
+    # Alias /webpath /full/filesystem/path
+    #
+    # If you include a trailing / on /webpath then the server will
+    # require it to be present in the URL.  You will also likely
+    # need to provide a <Directory> section to allow access to
+    # the filesystem path.
+
+    #
+    # ScriptAlias: This controls which directories contain server scripts. 
+    # ScriptAliases are essentially the same as Aliases, except that
+    # documents in the target directory are treated as applications and
+    # run by the server when requested rather than as documents sent to the
+    # client.  The same rules about trailing "/" apply to ScriptAlias
+    # directives as to Alias.
+    #
+    ScriptAlias /cgi-bin/ "/usr/local/apache2/cgi-bin/"
+
+</IfModule>
+
+<IfModule cgid_module>
+    #
+    # ScriptSock: On threaded servers, designate the path to the UNIX
+    # socket used to communicate with the CGI daemon of mod_cgid.
+    #
+    #Scriptsock logs/cgisock
+</IfModule>
+
+#
+# "/usr/local/apache2/cgi-bin" should be changed to whatever your ScriptAliased
+# CGI directory exists, if you have that configured.
+#
+<Directory "/usr/local/apache2/cgi-bin">
+    AllowOverride None
+    Options None
+    Order allow,deny
+    Allow from all
+</Directory>
+
+#
+# DefaultType: the default MIME type the server will use for a document
+# if it cannot otherwise determine one, such as from filename extensions.
+# If your server contains mostly text or HTML documents, "text/plain" is
+# a good value.  If most of your content is binary, such as applications
+# or images, you may want to use "application/octet-stream" instead to
+# keep browsers from trying to display binary files as though they are
+# text.
+#
+DefaultType text/plain
+
+<IfModule mime_module>
+    #
+    # TypesConfig points to the file containing the list of mappings from
+    # filename extension to MIME-type.
+    #
+    TypesConfig conf/mime.types
+
+    #
+    # AddType allows you to add to or override the MIME configuration
+    # file specified in TypesConfig for specific file types.
+    #
+    #AddType application/x-gzip .tgz
+    #
+    # AddEncoding allows you to have certain browsers uncompress
+    # information on the fly. Note: Not all browsers support this.
+    #
+    #AddEncoding x-compress .Z
+    #AddEncoding x-gzip .gz .tgz
+    #
+    # If the AddEncoding directives above are commented-out, then you
+    # probably should define those extensions to indicate media types:
+    #
+    AddType application/x-compress .Z
+    AddType application/x-gzip .gz .tgz
+
+    #
+    # AddHandler allows you to map certain file extensions to "handlers":
+    # actions unrelated to filetype. These can be either built into the server
+    # or added with the Action directive (see below)
+    #
+    # To use CGI scripts outside of ScriptAliased directories:
+    # (You will also need to add "ExecCGI" to the "Options" directive.)
+    #
+    #AddHandler cgi-script .cgi
+
+    # For type maps (negotiated resources):
+    #AddHandler type-map var
+
+    #
+    # Filters allow you to process content before it is sent to the client.
+    #
+    # To parse .shtml files for server-side includes (SSI):
+    # (You will also need to add "Includes" to the "Options" directive.)
+    #
+    #AddType text/html .shtml
+    #AddOutputFilter INCLUDES .shtml
+</IfModule>
+
+#
+# The mod_mime_magic module allows the server to use various hints from the
+# contents of the file itself to determine its type.  The MIMEMagicFile
+# directive tells the module where the hint definitions are located.
+#
+#MIMEMagicFile conf/magic
+
+#
+# Customizable error responses come in three flavors:
+# 1) plain text 2) local redirects 3) external redirects
+#
+# Some examples:
+#ErrorDocument 500 "The server made a boo boo."
+#ErrorDocument 404 /missing.html
+#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
+#ErrorDocument 402 http://www.example.com/subscription_info.html
+#
+
+#
+# EnableMMAP and EnableSendfile: On systems that support it, 
+# memory-mapping or the sendfile syscall is used to deliver
+# files.  This usually improves server performance, but must
+# be turned off when serving from networked-mounted 
+# filesystems or if support for these functions is otherwise
+# broken on your system.
+#
+#EnableMMAP off
+EnableSendfile on
+
+# Supplemental configuration
+#
+# The configuration files in the conf/extra/ directory can be 
+# included to add extra features or to modify the default configuration of 
+# the server, or you may simply copy their contents here and change as 
+# necessary.
+
+# Server-pool management (MPM specific)
+#Include conf/extra/httpd-mpm.conf
+
+# Multi-language error messages
+#Include conf/extra/httpd-multilang-errordoc.conf
+
+# Fancy directory listings
+#Include conf/extra/httpd-autoindex.conf
+
+# Language settings
+#Include conf/extra/httpd-languages.conf
+
+# User home directories
+#Include conf/extra/httpd-userdir.conf
+
+# Real-time info on requests and configuration
+#Include conf/extra/httpd-info.conf
+
+# Virtual hosts
+#Include conf/extra/httpd-vhosts.conf
+
+# Local access to the Apache HTTP Server Manual
+#Include conf/extra/httpd-manual.conf
+
+# Distributed authoring and versioning (WebDAV)
+#Include conf/extra/httpd-dav.conf
+
+# Various default settings
+#Include conf/extra/httpd-default.conf
+
+# Secure (SSL/TLS) connections
+#Include conf/extra/httpd-ssl.conf
+#
+# Note: The following must must be present to support
+#       starting without SSL on platforms with no /dev/random equivalent
+#       but a statically compiled-in mod_ssl.
+#
+<IfModule ssl_module>
+SSLRandomSeed startup builtin
+SSLRandomSeed connect builtin
+</IfModule>
+
+<VirtualHost *:8088>
+  ServerName SERVER
+  DocumentRoot /var/rails/MYAPP/public
+
+  <Directory "/var/rails/MYAPP/public">
+    Options FollowSymLinks
+    AllowOverride None
+    Order allow,deny
+    Allow from all
+  </Directory>
+
+  # Configure mongrel_cluster 
+  <Proxy balancer://mongrel_cluster>
+    BalancerMember http://127.0.0.1:8000
+    BalancerMember http://127.0.0.1:8001
+  </Proxy>
+
+  RewriteEngine On
+
+  # Uncomment for rewrite debugging 
+  #RewriteLog logs/your_app_rewrite_log
+  #RewriteLogLevel 9 
+
+  # Check for maintenance file and redirect all requests
+  RewriteCond %{DOCUMENT_ROOT}/system/maintenance.html -f
+  RewriteCond %{SCRIPT_FILENAME} !maintenance.html
+  RewriteRule ^.*$ /system/maintenance.html [L]
+
+  # Rewrite index to check for static
+  RewriteRule ^/$ /index.html [QSA] 
+
+  # Rewrite to check for Rails cached page
+  RewriteRule ^([^.]+)$ $1.html [QSA]
+
+  # Redirect all non-static requests to cluster
+  RewriteCond %{DOCUMENT_ROOT}/%{REQUEST_FILENAME} !-f
+  RewriteRule ^/(.*)$ balancer://mongrel_cluster%{REQUEST_URI} [P,QSA,L]
+
+  # Deflate
+  AddOutputFilterByType DEFLATE text/html text/plain text/xml
+  BrowserMatch ^Mozilla/4 gzip-only-text/html
+  BrowserMatch ^Mozilla/4\.0[678] no-gzip
+  BrowserMatch \bMSIE !no-gzip !gzip-only-text/html
+
+  # Uncomment for deflate debugging
+  #DeflateFilterNote Input input_info
+  #DeflateFilterNote Output output_info
+  #DeflateFilterNote Ratio ratio_info
+  #LogFormat '"%r" %{output_info}n/%{input_info}n (%{ratio_info}n%%)' deflate
+  #CustomLog logs/your_app_deflate_log deflate
+
+  ErrorLog logs/your_app_error_log
+  CustomLog logs/your_access_log combined
+</VirtualHost>
+
+