mongo 2.5.1 → 2.5.2

data/lib/mongo/operation/commands/find/result.rb

@@ -1,62 +0,0 @@
-# Copyright (C) 2015 MongoDB, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-module Mongo
-  module Operation
-    module Commands
-      class Find
-
-        # Defines custom behaviour of results in find command.
-        #
-        # @since 2.2.0
-        class Result < Operation::Result
-
-          # Get the cursor id.
-          #
-          # @example Get the cursor id.
-          #   result.cursor_id
-          #
-          # @return [ Integer ] The cursor id.
-          #
-          # @since 2.2.0
-          def cursor_id
-            cursor_document ? cursor_document[CURSOR_ID] : super
-          end
-
-          # Get the documents in the result.
-          #
-          # @example Get the documents.
-          #   result.documents
-          #
-          # @return [ Array<BSON::Document> ] The documents.
-          #
-          # @since 2.2.0
-          def documents
-            cursor_document[FIRST_BATCH]
-          end
-
-          private
-
-          def cursor_document
-            @cursor_document ||= reply.documents[0][CURSOR]
-          end
-
-          def first_document
-            @first_document ||= reply.documents[0]
-          end
-        end
-      end
-    end
-  end
-end

data/lib/mongo/operation/commands/get_more.rb

@@ -1,27 +0,0 @@
-# Copyright (C) 2015 MongoDB, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-module Mongo
-  module Operation
-    module Commands
-
-      # Encapsulates behaviour for executing a getmore command.
-      #
-      # @since 2.2.0
-      class GetMore < Command; end
-    end
-  end
-end
-
-require 'mongo/operation/commands/get_more/result'

data/lib/mongo/operation/commands/get_more/result.rb

@@ -1,62 +0,0 @@
-# Copyright (C) 2015 MongoDB, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-module Mongo
-  module Operation
-    module Commands
-      class GetMore
-
-        # Defines custom behaviour of results for the get more command.
-        #
-        # @since 2.2.0
-        class Result < Operation::Result
-
-          # Get the cursor id.
-          #
-          # @example Get the cursor id.
-          #   result.cursor_id
-          #
-          # @return [ Integer ] The cursor id.
-          #
-          # @since 2.2.0
-          def cursor_id
-            cursor_document ? cursor_document[CURSOR_ID] : super
-          end
-
-          # Get the documents in the result.
-          #
-          # @example Get the documents.
-          #   result.documents
-          #
-          # @return [ Array<BSON::Document> ] The documents.
-          #
-          # @since 2.2.0
-          def documents
-            cursor_document[NEXT_BATCH]
-          end
-
-          private
-
-          def cursor_document
-            @cursor_document ||= reply.documents[0][CURSOR]
-          end
-
-          def first_document
-            @first_document ||= reply.documents[0]
-          end
-        end
-      end
-    end
-  end
-end

data/lib/mongo/operation/commands/indexes.rb

@@ -1,73 +0,0 @@
-# Copyright (C) 2014-2017 MongoDB, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-module Mongo
-  module Operation
-    module Commands
-
-      # A MongoDB get indexes operation.
-      #
-      # Initialize the get indexes operation.
-      #
-      # @example Instantiate the operation.
-      #   Indexes.new(:db_name => 'test', :coll_name => 'test_coll')
-      #
-      # Initialization:
-      #   param [ Hash ] spec The specifications for the insert.
-      #
-      #   option spec :db_name [ String ] The name of the database.
-      #   option spec :coll_name [ String ] The name of the collection.
-      #
-      # @since 2.0.0
-      class Indexes
-        include Specifiable
-        include ReadPreference
-
-        # Execute the operation.
-        #
-        # @example Execute the operation.
-        #   operation.execute(server)
-        #
-        # @param [ Mongo::Server ] server The server to send this operation to.
-        #
-        # @return [ Result ] The indexes operation response.
-        #
-        # @since 2.0.0
-        def execute(server)
-          if server.features.list_indexes_enabled?
-            ListIndexes.new(spec).execute(server)
-          else
-            execute_message(server)
-          end
-        end
-
-        private
-
-        def execute_message(server)
-          server.with_connection do |connection|
-            Result.new(connection.dispatch([ message(server) ]))
-          end
-        end
-
-        def selector
-          { ns: namespace }
-        end
-
-        def query_coll
-          Index::COLLECTION
-        end
-      end
-    end
-  end
-end

data/lib/mongo/operation/commands/list_collections.rb

@@ -1,48 +0,0 @@
-# Copyright (C) 2014-2017 MongoDB, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-module Mongo
-  module Operation
-    module Commands
-
-      # A MongoDB listCollections command operation.
-      #
-      # @example Create the listCollections command operation.
-      #   ListCollections.new(db_name: 'test')
-      #
-      # @note A command is actually a query on the virtual '$cmd' collection.
-      #
-      # Initialization:
-      #   param [ Hash ] spec The specifications for the command.
-      #
-      #   option spec :db_name [ String ] The name of the database whose list of
-      #     collection names is requested.
-      #   option spec :options [ Hash ] Options for the command.
-      #
-      # @since 2.0.0
-      class ListCollections < Command
-
-        private
-
-        def selector
-          (spec[SELECTOR] || {}).merge(
-            listCollections: 1, filter: { name: { '$not' => /system\.|\$/ }}
-          )
-        end
-      end
-    end
-  end
-end
-
-require 'mongo/operation/commands/list_collections/result'

data/lib/mongo/operation/commands/list_collections/result.rb

@@ -1,94 +0,0 @@
-# Copyright (C) 2014-2017 MongoDB, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-module Mongo
-  module Operation
-    module Commands
-      class ListCollections
-
-        # Defines custom behaviour of results when using the
-        # listCollections command.
-        #
-        # @since 2.0.0
-        class Result < Operation::Result
-
-          # Get the cursor id for the result.
-          #
-          # @example Get the cursor id.
-          #   result.cursor_id
-          #
-          # @note Even though the wire protocol has a cursor_id field for all
-          #   messages of type reply, it is always zero when using the
-          #   listCollections command and must be retrieved from the cursor
-          #   document itself.
-          #
-          # @return [ Integer ] The cursor id.
-          #
-          # @since 2.0.0
-          def cursor_id
-            cursor_document ? cursor_document[CURSOR_ID] : super
-          end
-
-          # Get the namespace for the cursor.
-          #
-          # @example Get the namespace.
-          #   result.namespace
-          #
-          # @return [ String ] The namespace.
-          #
-          # @since 2.0.0
-          def namespace
-            cursor_document ? cursor_document[NAMESPACE] : super
-          end
-
-          # Get the documents for the listCollections result. It is the 'firstBatch'
-          #   field in the 'cursor' field of the first document returned.
-          #
-          # @example Get the documents.
-          #   result.documents
-          #
-          # @return [ Array<BSON::Document> ] The documents.
-          #
-          # @since 2.0.0
-          def documents
-            cursor_document[FIRST_BATCH]
-          end
-
-          # Validate the result. In the case where an unauthorized client tries
-          # to run the command we need to generate the proper error.
-          #
-          # @example Validate the result.
-          #   result.validate!
-          #
-          # @return [ Result ] Self if successful.
-          #
-          # @since 2.0.0
-          def validate!
-            !successful? ? raise(Error::OperationFailure.new(parser.message, self)) : self
-          end
-
-          private
-
-          def cursor_document
-            @cursor_document ||= first_document[CURSOR]
-          end
-
-          def first_document
-            @first_document ||= reply.documents[0]
-          end
-        end
-      end
-    end
-  end
-end

data/lib/mongo/operation/commands/list_indexes.rb

@@ -1,48 +0,0 @@
-# Copyright (C) 2014-2017 MongoDB, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-module Mongo
-  module Operation
-    module Commands
-
-      # A MongoDB listIndexes command operation.
-      #
-      # @example Create the listIndexes command operation.
-      #   ListIndexes.new({ db_name: 'test', coll_name: 'example' })
-      #
-      # @note A command is actually a query on the virtual '$cmd' collection.
-      #
-      # Initialization:
-      #   param [ Hash ] spec The specifications for the command.
-      #
-      #   option spec :coll_name [ Hash ] The name of the collection whose index
-      #     info is requested.
-      #   option spec :db_name [ String ] The name of the database on which
-      #     the command should be executed.
-      #   option spec :options [ Hash ] Options for the command.
-      #
-      # @since 2.0.0
-      class ListIndexes < Command
-
-        private
-
-        def selector
-          (spec[SELECTOR] || {}).merge(listIndexes: coll_name)
-        end
-      end
-    end
-  end
-end
-
-require 'mongo/operation/commands/list_indexes/result'

data/lib/mongo/operation/commands/list_indexes/result.rb

@@ -1,98 +0,0 @@
-# Copyright (C) 2014-2017 MongoDB, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-module Mongo
-  module Operation
-    module Commands
-      class ListIndexes
-
-        # Defines custom behaviour of results when using the
-        # listIndexes command.
-        #
-        # @since 2.0.0
-        class Result < Operation::Result
-
-          # Get the cursor id for the result.
-          #
-          # @example Get the cursor id.
-          #   result.cursor_id
-          #
-          # @note Even though the wire protocol has a cursor_id field for all
-          #   messages of type reply, it is always zero when using the
-          #   listIndexes command and must be retrieved from the cursor
-          #   document itself.
-          #
-          # @return [ Integer ] The cursor id.
-          #
-          # @since 2.0.0
-          def cursor_id
-            cursor_document ? cursor_document[CURSOR_ID] : super
-          end
-
-          # Get the namespace for the cursor.
-          #
-          # @example Get the namespace.
-          #   result.namespace
-          #
-          # @return [ String ] The namespace.
-          #
-          # @since 2.0.0
-          def namespace
-            cursor_document ? cursor_document[NAMESPACE] : super
-          end
-
-          # Get the documents for the listIndexes result. This is the 'firstBatch'
-          # field in the 'cursor' field of the first document returned.
-          #
-          # @example Get the documents.
-          #   result.documents
-          #
-          # @return [ Array<BSON::Document> ] The documents.
-          #
-          # @since 2.0.0
-          def documents
-            cursor_document[FIRST_BATCH]
-          end
-
-          # Validate the result. In the case where the database or collection
-          # does not exist on the server we will get an error, and it's better
-          # to raise a meaningful exception here than the ambiguous one when
-          # the error occurs.
-          #
-          # @example Validate the result.
-          #   result.validate!
-          #
-          # @raise [ NoNamespace ] If the ns doesn't exist.
-          #
-          # @return [ Result ] Self if successful.
-          #
-          # @since 2.0.0
-          def validate!
-            !successful? ? raise(Error::OperationFailure.new(parser.message, self)) : self
-          end
-
-          private
-
-          def cursor_document
-            @cursor_document ||= first_document[CURSOR]
-          end
-
-          def first_document
-            @first_document ||= reply.documents[0]
-          end
-        end
-      end
-    end
-  end
-end