mongo 1.8.6 → 2.15.1

data/spec/README.md

@@ -0,0 +1,715 @@
+# Running Ruby Driver Tests
+
+## Quick Start
+
+The test suite requires shared tooling that is stored in a separate repository
+and is referenced as a submodule. After checking out the desired driver
+branch, check out the matching submodules:
+
+    git submodule init
+    git submodule update
+
+To run the test suite against a local MongoDB deployment listening on port
+27017, run:
+
+    rake
+
+When run without options, the test suite will automatically detect deployment
+topology and configure itself appropriately. Standalone, replica set and
+sharded cluster topologies are supported (though the test suite will presently
+use only the first listed shard in a sharded cluster if given a seed list,
+or the one running on port 27017 if not given a seed list).
+
+TLS, authentication and other options can be configured via URI options by
+setting `MONGODB_URI` environment variable appropriately. Examples of such
+configuration are given later in this document.
+
+## MongoDB Server Deployment
+
+The tests require a running MongoDB deployment, configured and started
+externally to the test suite.
+
+Tests that are not appropriate for the running deployment will be skipped,
+with one exception: the test suite assumes that fail points are enabled in
+the deployment (see the Fail Points section below). Not every test uses fail
+points, therefore it is possible to launch the server without fail points
+being enabled and still pass many of the tests in the test suite.
+
+## Starting MongoDB Deployment
+
+There are many ways in which MongoDB can be started. The instructions below
+are for manually launching `mongod` instances and using
+[mlaunch](http://blog.rueckstiess.com/mtools/mlaunch.html)
+(part of [mtools](https://github.com/rueckstiess/mtools)) for more complex
+deployments, but other tools like
+[mongodb-runner](https://github.com/mongodb-js/runner) and
+[Mongo Orchestration](https://github.com/10gen/mongo-orchestration) can
+in principle also work.
+
+### Standalone
+
+The simplest possible deployment is a standalone `mongod`, which can be
+launched as follows:
+
+    # Launch mongod in one terminal
+    mkdir /tmp/mdb
+    mongod --dbpath /tmp/mdb --setParameter enableTestCommands=1
+
+    # Run tests in another terminal
+    rake
+
+A standalone deployment is a good starting point, however a great many tests
+require a replica set deployment and will be skipped on a standalone deployment.
+
+### Replica Set
+
+While a replica set can be started and configured by hand, doing so is
+cumbersome. The examples below use
+[mlaunch](http://blog.rueckstiess.com/mtools/mlaunch.html)
+to start a replica set.
+
+First, install [mtools](https://github.com/rueckstiess/mtools):
+
+    pip install 'mtools[mlaunch]' --user -U --upgrade-strategy eager
+    # On Linux:
+    export PATH=~/.local/bin:$PATH
+    # On MacOS:
+    export PATH=$PATH:~/Library/Python/2.7/bin
+
+Then, launch a replica set:
+
+    mlaunch init --replicaset --name ruby-driver-rs \
+      --dir /tmp/mdb-rs --setParameter enableTestCommands=1
+
+The test suite willl automatically detect the topology, no explicit
+configuration is needed:
+
+    rake
+
+### Replica Set With Arbiter
+
+Some tests require an arbiter to be present in the replica set. Such a
+deployment can be obtained by providing `--arbiter` argument to mlaunch:
+
+    mlaunch init --replicaset --arbiter --name ruby-driver-rs \
+      --dir /tmp/mdb-rs --setParameter enableTestCommands=1
+
+To indicate to the test suite that the deployment contains an arbiter, set
+HAVE_ARBITER environment variable as follows:
+
+    HAVE_ARBITER=1 rake
+
+### Sharded Cluster
+
+A sharded cluster can be configured with mlaunch:
+
+    mlaunch init --replicaset --name ruby-driver-rs --sharded 1 --mongos 2 \
+      --dir /tmp/mdb-sc --setParameter enableTestCommands=1
+
+As with the replica set, the test suite will automatically detect sharded
+cluster topology.
+
+Note that some tests require a sharded cluster with exactly one shard and
+other tests require a sharded cluster with more than one shard. Tests requiring
+a single shard can be run against a deployment with multiple shards by
+specifying only one mongos address in MONGODB_URI.
+
+## Note Regarding TLS/SSL Arguments
+
+MongoDB 4.2 (server and shell) added new command line options for setting TLS
+parameters. These options follow the naming of URI options used by both the
+shell and MongoDB drivers starting with MongoDB 4.2. The new options start with
+the `--tls` prefix.
+
+Old options, starting with the `--ssl` prefix, are still supported for backwards
+compatibility, but their use is deprecated. As of this writing, mlaunch only
+supports the old `--ssl` prefix options.
+
+In the rest of this document, when TLS options are given for `mongo` or
+`mongod` they use the new `--tls` prefixed arguments, and when the same options
+are given to `mlaunch` they use the old `--ssl` prefixed forms. The conversion
+table of the options used herein is as follows:
+
+| --tls prefixed option   | --ssl prefixed option |
+| ----------------------- | --------------------- |
+| --tls                   | --ssl                 |
+| --tlsCAFile             | --sslCAFile           |
+| --tlsCertificateKeyFile | --sslPEMKeyFile       |
+
+## TLS With Verification
+
+The test suite includes a set of TLS certificates for configuring a server
+and a client to perform full TLS verification in the `spec/support/certificates`
+directory. The server can be started as follows, if the current directory is
+the top of the driver source tree:
+
+    mlaunch init --single --dir /tmp/mdb-ssl --sslMode requireSSL \
+      --sslPEMKeyFile `pwd`/spec/support/certificates/server.pem \
+      --sslCAFile `pwd`/spec/support/certificates/ca.crt \
+      --sslClientCertificate `pwd`/spec/support/certificates/client.pem
+
+To test that the driver works when the server's certificate is signed by an
+intermediate certificate (i.e. uses certificate chaining), use the chained
+server certificate bundle:
+
+    mlaunch init --single --dir /tmp/mdb-ssl --sslMode requireSSL \
+      --sslPEMKeyFile `pwd`/spec/support/certificates/server-second-level-bundle.pem \
+      --sslCAFile `pwd`/spec/support/certificates/ca.crt \
+      --sslClientCertificate `pwd`/spec/support/certificates/client.pem
+
+The driver's test suite is configured to verify certificates by default.
+If the server is launched with the certificates from the driver's test suite,
+the test suite can be run simply by specifying `tls=true` URI option:
+
+    MONGODB_URI='mongodb://localhost:27017/?tls=true' rake
+
+The driver's test suite can also be executed against a server launched with
+any other certificates. In this case the certificates need to be explicitly
+specified in the URI, for example as follows:
+
+    MONGODB_URI='mongodb://localhost:27017/?tls=true&tlsCAFile=path/to/ca.crt&tlsCertificateKeyFile=path/to/client.pem' rake
+
+Note that some tests (specifically testing TLS verification) expect the server
+to be launched using the certificates in the driver's test suite, and will
+fail when run against a server using other certificates.
+
+## TLS Without Verification
+
+It is also possible to enable TLS but omit certificate verification. In this
+case a standalone server can be started as follows:
+
+    mlaunch init --single --dir /tmp/mdb-ssl --sslMode requireSSL \
+      --sslPEMKeyFile `pwd`/spec/support/certificates/server.pem \
+      --sslCAFile `pwd`/spec/support/certificates/ca.crt \
+      --sslAllowConnectionsWithoutCertificates \
+      --sslAllowInvalidCertificates
+
+To run the test suite against such a server, also omitting certificate
+verification, run:
+
+    MONGODB_URI='mongodb://localhost:27017/?tls=true&tlsInsecure=true' rake
+
+Note that there are tests in the test suite that cover TLS verification, and
+they may fail if the test suite is run in this way.
+
+## OCSP
+
+There are several types of OCSP tests implemented in the test suite.
+
+OCSP unit tests are in `spec/integration/ocsp_verifier_spec.rb`. To run
+these, set `OCSP_VERIFIER=1` in the environment. There must NOT be a process
+running on the host port 8100 as that port will be used by the OCSP responder
+launched by the tests.
+
+For the remaining OCSP tests, the following environment variables must be set
+to the possible values indicated below:
+
+    OCSP_ALGORITHM=rsa|ecdsa
+    OCSP_STATUS=valid|revoked|unknown
+    OCSP_DELEGATE=0|1
+    OCSP_MUST_STAPLE=0|1
+
+These tests also require the mock OCSP responder running on the host machine
+on port 8100 with the configuration that matches the environment variables
+just described. Please refer to the Docker and Evergreen scripts in the
+driver repository for further details.
+
+Additionally, the server must be configured to use the appropriate server
+certificate and CA certificate from the respective subdirectory of
+`spec/support/ocsp`. This is easiest to achieve by using the Docker tooling
+described in `.evergreen/README.md`.
+
+OCSP connectivity tests are in `spec/integration/ocsp_connectivity.rb`.
+These test the combinations described
+[here](https://github.com/mongodb/specifications/blob/master/source/ocsp-support/tests/README.rst#integration-tests-permutations-to-be-tested).
+To run these tests, set `OCSP_CONNECTIVITY=pass` environment variable if
+the tests are expected to connect successfully or `OCSP_CONNECTIVITY=fail` if
+the tests are expected to not connect.
+Note that some of these configurations require OCSP responder to return
+the failure response; in such configurations, ONLY the OCSP connectivity tests
+may pass (since the driver may reject connections to servers when OCSP
+responder returns the failure response, or OCSP verification otherwise
+definitively fails).
+
+When not running either OCSP verifier tests or OCSP connectivity tests but
+when OCSP algorithm is configured, the test suite will execute normally
+using the provided `MONGO_URI`. This configuration may be used to exercise
+OCSP while running the full test suite. In this case, setting `OCSP_STATUS`
+to `revoked` will generally cause the test suite to fail.
+
+## Authentication
+
+mlaunch can configure authentication on the server:
+
+    mlaunch init --single --dir /tmp/mdb-auth --auth --username dev --password dev
+
+To run the test suite against such a server, run:
+
+    MONGODB_URI='mongodb://dev:dev@localhost:27017/' rake
+
+## X.509 Authentication
+
+Note: Testing X.509 authentication requires an enterprise build of the MongoDB
+server.
+
+To set up a server configured for authentication with an X.509 certificate,
+first launch a TLS-enabled server with a regular credentialed user.
+
+The credentialed user is required because mlaunch configures `--keyFile`
+option for cluster member authentication, which in turn enables authentication.
+With authentication enabled, `mongod` allows creating the first user in the
+`admin` database but the X.509 user must be created in the `$external`
+database - as a result, the X.509 user cannot be the only user in the deployment.
+
+Run the following command to set up a standalone `mongod` with a bootstrap
+user:
+
+    mlaunch init --single --dir /tmp/mdb-x509 --sslMode requireSSL \
+      --sslPEMKeyFile `pwd`/spec/support/certificates/server.pem \
+      --sslCAFile `pwd`/spec/support/certificates/ca.crt \
+      --sslClientCertificate `pwd`/spec/support/certificates/client.pem \
+      --auth --username bootstrap --password bootstrap
+
+Next, create the X.509 user. The command to create the user is the same
+across all supported MongoDB versions, and for convenience we assign its text
+to a variable as follows:
+
+    create_user_cmd="`cat <<'EOT'
+      db.getSiblingDB("$external").runCommand(
+        {
+          createUser: "C=US,ST=New York,L=New York City,O=MongoDB,OU=x509,CN=localhost",
+          roles: [
+               { role: "dbAdminAnyDatabase", db: "admin" },
+               { role: "readWriteAnyDatabase", db: "admin" },
+               { role: "userAdminAnyDatabase", db: "admin" },
+               { role: "clusterAdmin", db: "admin" },
+          ],
+          writeConcern: { w: "majority" , wtimeout: 5000 },
+        }
+      )
+    EOT
+    `"
+
+Use the MongoDB shell to execute this command:
+
+    mongo --tls \
+      --tlsCAFile `pwd`/spec/support/certificates/ca.crt \
+      --tlsCertificateKeyFile `pwd`/spec/support/certificates/client-x509.pem \
+      -u bootstrap -p bootstrap \
+      --eval "$create_user_cmd"
+
+Verify that authentication is required by running the following command, which
+should fail:
+
+    mongo --tls \
+      --tlsCAFile `pwd`/spec/support/certificates/ca.crt \
+      --tlsCertificateKeyFile `pwd`/spec/support/certificates/client-x509.pem \
+      --eval 'db.serverStatus()'
+
+Verify that X.509 authentication works by running the following command:
+
+    mongo --tls \
+      --tlsCAFile `pwd`/spec/support/certificates/ca.crt \
+      --tlsCertificateKeyFile `pwd`/spec/support/certificates/client-x509.pem \
+      --authenticationDatabase '$external' \
+      --authenticationMechanism MONGODB-X509 \
+      --eval 'db.serverStatus()'
+
+The test suite includes a set of integration tests for X.509 client authentication.
+
+To run the test suite against such a server, run:
+
+    MONGODB_URI="mongodb://localhost:27017/?authMechanism=MONGODB-X509&tls=true&tlsCAFile=spec/support/certificates/ca.crt&tlsCertificateKeyFile=spec/support/certificates/client-x509.pem" rake
+
+## Kerberos
+
+The Kerberos-related functionality is packaged in a separate gem,
+`mongo_kerberos`. To run any of the Kerberos tests, a special gemfile must
+be used that references `mongo_kerberos`:
+
+    export BUNDLE_GEMFILE=gemfiles/mongo_kerberos.gemfile
+    bundle install
+
+Ensure that BUNDLE_GEMFILE is set in the environment for both the
+`bundle install` invocation and the `rake` / `rspec` invocation.
+
+### Unit Tests
+
+The driver test suite includes a number of Kerberos-related unit tests that
+are skipped by default. To run them as part of the test suite, set the
+`MONGO_RUBY_DRIVER_KERBEROS` environment variable to `1`, `yes` or `true`
+as follows:
+
+    export MONGO_RUBY_DRIVER_KERBEROS=1
+    rake
+
+Note that running the full test suite requires a MongoDB deployment. It is
+possible to run just the Kerberos-related unit tests without provisioning a
+MongoDB deployment; consult the `.evergreen/run-tests-kerberos-unit.sh` file
+for the full list of relevant test files.
+
+### Integration Tests
+
+The driver test suite includes a number of Kerberos-related integration tests
+in the `spec/kerberos` directory. These require a provisioned Kerberos
+deployment and appropriately configured MongoDB deployment. One such deployment
+is provided internally by MongoDB and is used in the driver's Evergreen
+configuration; it is also possible to provision a test deployment locally,
+either via the Docker tooling provided by the driver test suite or manually.
+
+#### Via Docker
+
+Run:
+
+    ./.evergreen/test-on-docker -s .evergreen/run-tests-kerberos-integration.sh -pd rhel70
+
+When `SASL_HOST` environment variable is not set, the Kerberos integration
+test script `.evergreen/run-tests-kerberos-integration.sh` provisions a
+local Kerberos deployment in the Docker container and configures the test suite
+to use it.
+
+Note: the tooling is currently set up to provision a working `rhel70`
+container. Ubuntu distros are not presently supported.
+
+#### Locally
+
+The following additional environment variables must be set to run the
+Kerberos integration tests:
+
+- `MONGO_RUBY_DRIVER_KERBEROS_INTEGRATION=1`
+- `SASL_HOST`: the FQDN host name of the MongoDB server that is configured to
+use Kerberos. Note that this is NOT the Kerberos domain controller (KDC).
+- `SASL_REALM`: the Kerberos realm. Depending on how Kerberos is configured,
+this can be the same as or different from `SASL_HOST`. The Evergreen
+configuration uses the same host and realm; Docker configuration provided
+by the Ruby driver uses different host and realm.
+- `SASL_PORT`: the port number that the Kerberized MongoDB server is
+listening on.
+- `SASL_USER`: the username to provide to MongoDB for authentication.
+This must match the username of the principal.
+- `SASL_DB`: the database that stores the user used for authentication. This
+is the "auth soure" in MongoDB parlance. Normally this should be `$external`.
+- `PRINCIPAL`: the Kerberos principal to use for authentication, in the
+form of `username@realm`. Note that the realm is commonly uppercased.
+- `KERBEROS_DB`: the database that the user has access to.
+
+Note that the driver does not directly provide a password to the MongoDB
+server when using Kerberos authentication, and because of this there is no
+user password provided to the test suite either when Kerberos authentication
+is used. Instead, there must be a local session established via e.g. `kinit`.
+Consult the `.evergreen/run-tests-kerberos-integration.sh` file for details.
+
+## Client-Side Encryption
+
+NOTE: Client-side encryption tests require an enterprise build of MongoDB
+server version 4.2 or higher. These builds of the MongoDB server come packaged with
+mongocryptd, a daemon that is spawned by the driver during automatic encryption.
+The client-side encryption tests require the mongocryptd binary to be in the
+system path.
+
+Download enterprise versions of MongoDB here: https://www.mongodb.com/download-center/enterprise
+Read more about installing mongocryptd here: https://docs.mongodb.com/manual/reference/security-client-side-encryption-appendix/#mongocryptd
+
+Install libmongocrypt on your machine:
+
+Option 1: Download a pre-built binary
+- Download a tarball of all libmongocrypt variations from this link:
+    https://s3.amazonaws.com/mciuploads/libmongocrypt/all/master/latest/libmongocrypt-all.tar.gz
+- Unzip the file you downloaded. You will see a list of folders, each
+    corresponding to an operating system. Find the folder that matches
+    your operating system and open it.
+- Inside that folder, open the folder called "nocrypto." In either the
+    lib or lb64 folder, you will find the libmongocrypt.so or
+    libmongocrypt.dylib or libmongocrypt.dll file, depending on your OS.
+- Move that file to wherever you want to keep it on your machine.
+
+Option 2: Build from source
+- To build libmongocrypt from source, follow the instructions in the README on the libmongocrypt GitHub repo: https://github.com/mongodb/libmongocrypt
+
+Create AWS KMS keys
+Many of the Client-Side Encryption tests require that you have an encryption
+master key hosted on AWS's Key Management Service. Set up a master key by following
+these steps:
+
+1. Sign up for an AWS account at this link if you don't already have one: https://aws.amazon.com/resources/create-account/
+
+2. Create a new IAM user that you want to have permissions to access your new
+master key by following this guide: the "Creating an Administrator IAM User and Group (Console)"
+section of this guide: https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_create_for-user.html
+
+3. Create an access key for your new IAM user and store the access key credentials
+in environment variables on your local machine. Create an access key by following the
+"Managing Access Keys (Console)" instructions in this guide:
+https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_access-keys.html#Using_CreateAccessKey
+Once an access key has been created, store the access key id and the access key
+secret in environment variables. If you plan to frequently run Client-Side
+Encryption tests, it may be a good idea to put these lines in your .bash_profile
+or .bashrc file. Otherwise, you can run them in the terminal window where you
+plan to run your tests.
+
+    ```
+    export MONGO_RUBY_DRIVER_AWS_KEY="YOUR-ACCESS-KEY-ID"
+    export MONGO_RUBY_DRIVER_AWS_SECRET="YOUR-ACCESS-KEY-SECRET"
+    ```
+
+4. Create a new symmetric Customer Master Key (CMK) by following the "Creating Symmetric CMKs (Console)"
+section of this guide: https://docs.aws.amazon.com/kms/latest/developerguide/create-keys.html
+
+5. Store information about your CMK in the following environment variables:
+
+    a. **Region:** Find your AWS region by following this guide: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-regions-availability-zones.html#using-regions-availability-zones-describe
+    (for example, your region might be "us-east-1" or "ap-south-2").
+
+    b. **Amazon Resource Name (ARN):** Read the following guide to learn more about ARNs
+        and how to view your key's ARN: https://docs.aws.amazon.com/kms/latest/developerguide/viewing-keys-console.html
+
+    Store these two pieces of information in environment variables. If you plan
+    to frequently run Client-Side Encryption tests, it may be a good idea to put
+    these lines in your .bash_profile or .bashrc file. Otherwise, you can run
+    them in the terminal window where you plan to run your tests.
+
+    ```
+    export MONGO_RUBY_DRIVER_AWS_REGION="YOUR-AWS-REGION"
+    export MONGO_RUBY_DRIVER_AWS_ARN="YOUR-AWS-ARN"
+    ```
+
+6. Give your IAM user "Key administrator" and "Key user" privileges on your new CMK
+by following the "Using the AWS Management Console Default View" section of this guide:
+https://docs.aws.amazon.com/kms/latest/developerguide/key-policy-modifying.html
+
+In one terminal, launch MongoDB:
+
+```
+mkdir /tmp/mdb
+mongod --dbpath /tmp/mdb --setParameter enableTestCommands=1
+```
+
+In another terminal run the tests, making sure to set the `LIBMONGOCRYPT_PATH`
+environment variable to the full path to the .so/.dll/.dylib
+```
+LIBMONGOCRYPT_PATH=/path/to/your/libmongocrypt/nocrypto/libmongocrypt.so bundle exec rake
+```
+
+If you would like to run the client-side encryption tests on a replica set or
+sharded cluster, be aware that the driver will try to spawn the mongocryptd daemon on
+port 27020 by default. If port 27020 is already in use by a mongod or mongos
+process, spawning mongocryptd will fail, causing the tests to fail as well.
+
+To avoid this problem, set the MONGO_RUBY_DRIVER_MONGOCRYPTD_PORT environment
+variable to the port at which you would like the driver to spawn mongocryptd.
+For example, to always have the mongocryptd process listen on port 27090:
+
+```
+export MONGO_RUBY_DRIVER_MONGOCRYPTD_PORT=27090
+```
+
+Keep in mind that this will only impact the behavior of the Ruby Driver test suite,
+not the behavior of the driver itself.
+
+## Compression
+
+To test compression, set the `compressors` URI option:
+
+    MONGODB_URI="mongodb://localhost:27017/?compressors=zlib" rake
+
+Note that as of this writing, the driver supports
+[ztsd](https://docs.mongodb.com/manual/reference/glossary/#term-zstd),
+[snappy](https://docs.mongodb.com/manual/reference/glossary/#term-snappy)
+and [zlib](https://docs.mongodb.com/manual/reference/glossary/#term-zlib)
+compression.
+
+Servers 4.2+ enable zlib by default; to test older servers, explicitly enable
+zlib compression when launching the server:
+
+    mongod --dbpath /tmp/mdb --setParameter enableTestCommands=1 \
+      --networkMessageCompressors snappy,zlib
+
+## Server API
+
+To specify server API parameters, use the `SERVER_API` environment variable.
+The server API parameters cannot be specified via URI options.
+
+Both YAML and JSON syntaxes are accepted:
+    
+    SERVER_API='{version: "1", strict: true}' rake
+
+    SERVER_API='{"version":"1","strict":true}' rake
+
+Note that the input must be valid YAML or JSON and the version number must
+be a string, therefore all of the following specifications are invalid:
+
+    SERVER_API='{version:"1",strict:true}' rake
+    SERVER_API='{version: 1}' rake
+    SERVER_API='{"version":1,"strict":true}' rake
+
+## Other Options
+
+Generally, all URI options recognized by the driver may be set for a test run,
+and will cause the clients created by the test suite to have those options
+by default. For example, retryable writes may be turned on and off as follows:
+
+    MONGODB_URI='mongodb://localhost:27017/?retryWrites=true' rake
+
+    MONGODB_URI='mongodb://localhost:27017/?retryWrites=false' rake
+
+Individual tests may override options that the test suite uses as defaults.
+For example, retryable writes tests may create clients with the retry writes
+option set to true or false as needed regardless of what the default is for
+the entire test run.
+
+It is also possible to, for example, reference non-default hosts and replica
+set names:
+
+    MONGODB_URI='mongodb://test.host:27017,test.host:27018/?replicaSet=fooset' rake
+
+However, as noted in the caveats section, changing the database name used by
+the test suite is not supported.
+
+## Special Tests
+
+Some tests require internet connectivity, for example to test DNS seed lists
+and SRV URIs. These tests can be skipped by setting the following environment
+variable:
+
+    EXTERNAL_DISABLED=1
+
+Some tests are designed to validate the driver's behavior under load, or
+otherwise execute a large number of operations which may take a sizable amount
+of time. Such tests are skipped by default and can be run by setting the
+following environment variable:
+
+    STRESS=1
+
+Some tests fork the process to validate the driver's behavior when forking is
+involved. These tests are skipped by default and can be run by setting the
+following environment variable:
+
+    FORK=1
+
+OCSP tests require Python 3 with asn1crypto, oscrypto and flask packages
+installed, and they require the drivers-evergreen-tools submodule to be
+checked out. To run these tests, set the following environment variable:
+
+    OCSP=1
+
+To check out the submodule, run:
+
+    git submodule update --init --recursive
+
+## Debug Logging
+
+The test suite is run with the driver log level set to `WARN` by default.
+This produces a fair amount of output as many tests trigger various conditions
+resulting in the driver outputting warnings. This is expected behavior.
+
+To increase the driver log level to `DEBUG`, set the
+`MONGO_RUBY_DRIVER_CLIENT_DEBUG` environment variable to `1`, `true` or `yes`.
+This will produce additional log output pertaining to, for example, SDAM
+events and transitions performed by the driver, as well as log all
+commands sent to and responses received from the database.
+
+To debug authentication and user management commands, set the
+`MONGO_RUBY_DRIVER_UNREDACT_EVENTS` environment variable to `1`, `true` or
+`yes`. This will disable redaction of command monitoring payloads for sensitive
+commands. Normally this environment variable should be used with
+`MONGO_RUBY_DRIVER_CLIENT_DEBUG` to see the command payloads.
+
+## Caveats
+
+### Socket Permission Errors
+
+If you get permission errors connecting to `mongod`'s socket, adjust its
+permissions:
+
+    sudo chmod 0666 /tmp/mongodb-27017.sock
+
+Alternatively, specify the following argument to `mlaunch` or `mongod`:
+
+    --filePermissions 0666
+
+### Non-Identical Hostnames
+
+The test suite should be configured to connect to exactly the hostnames
+configured in the cluster. If, for example, the test suite is configured
+to use IP addresses but the cluster is configured with hostnames, most tests
+would still work (by using SDAM to discover correct cluster configuration)
+but will spend a significant amount of extra time on server discovery.
+
+Some tests perform address assertions and will fail if hostnames configured
+in the test suite do not match hostnames configured in the cluster.
+For the same reason, each node in server configuration should have its port
+specified.
+
+### Database Name
+
+The test suite currently does not allow changing the database name that it
+uses, which is `ruby-driver`. Attempts to specify a different database name
+in the URI for example will lead to some of the tests failing.
+
+### Fail Points
+
+In order to run some of the tests, the mongo cluster needs to have fail points
+enabled. This is accomplished by starting `mongod` with the following option:
+
+    --setParameter enableTestCommands=1
+
+## Running Individual Examples
+
+Individual examples can be run by invoking `rspec` instead of `rake`. Prior
+to running `rspec`, ensure the test suite created users for itself - this
+is done by the `rake` command automatically, or you can manually invoke the
+Rake task which configures the deployment for testing:
+
+    rake spec:prepare
+
+Then, any of the standard RSpec invocations will work:
+
+    rspec path/to/file_spec.rb
+
+## Configuration Reporting
+
+To have the test suite report its current configuration, run:
+
+    rake spec:config
+
+## Color Output
+
+The test suite uses color output by default. To view the output in `less`
+with color, use the `-R` option:
+
+    rake 2>&1 | tee rake.log
+    less -R rake.log
+
+## Debugging
+
+The test suite is configured to use [Byebug](https://github.com/deivid-rodriguez/byebug)
+for debugging on MRI and [ruby-debug](https://github.com/jruby/jruby/wiki/UsingTheJRubyDebugger)
+on JRuby.
+
+### MRI
+
+Call `byebug` anywhere in the test suite to break into Byebug.
+
+### JRuby
+
+To debug on JRuby, the test suite must be started with the `--debug` argument
+to `jruby`. This can be achieved by starting the test suite as follows:
+
+    jruby --debug -S rspec [rspec args...]
+
+Call `debugger` anywhere in the test suite to break into the debugger.
+
+### Docker
+
+By default, when the test suite is running in a CI environment the debuggers
+are not loaded. The Docker runner emulates the CI environment, therefore
+to debug in Docker the debugger must be explicitly loaded first. To break
+into the debugger on MRI, call:
+
+    require 'byebug'
+    byebug
+
+To break into the debugger on JRuby, call:
+
+    require 'ruby-debug'
+    debugger