modern_treasury 0.1.0.pre.alpha.19 → 0.1.0.pre.alpha.21

data/lib/modern_treasury/resources/payment_orders.rb

@@ -15,41 +15,41 @@ module ModernTreasury
       #
       # @param amount [Integer] Value in specified currency's smallest unit. e.g. $10 would be represented as 10
       #
-      # @param direction [Symbol, ModernTreasury::PaymentOrderCreateParams::Direction] One of `credit`, `debit`. Describes the direction money is flowing in the transa
+      # @param direction [Symbol, ModernTreasury::Models::PaymentOrderCreateParams::Direction] One of `credit`, `debit`. Describes the direction money is flowing in the transa
       #
       # @param originating_account_id [String] The ID of one of your organization's internal accounts.
       #
-      # @param type [Symbol, ModernTreasury::PaymentOrderType] One of `ach`, `se_bankgirot`, `eft`, `wire`, `check`, `sen`, `book`, `rtp`, `sep
+      # @param type [Symbol, ModernTreasury::Models::PaymentOrderType] One of `ach`, `se_bankgirot`, `eft`, `wire`, `check`, `sen`, `book`, `rtp`, `sep
       #
-      # @param accounting [ModernTreasury::PaymentOrderCreateParams::Accounting]
+      # @param accounting [ModernTreasury::Models::PaymentOrderCreateParams::Accounting]
       #
       # @param accounting_category_id [String, nil] The ID of one of your accounting categories. Note that these will only be access
       #
       # @param accounting_ledger_class_id [String, nil] The ID of one of your accounting ledger classes. Note that these will only be ac
       #
-      # @param charge_bearer [Symbol, ModernTreasury::PaymentOrderCreateParams::ChargeBearer, nil] The party that will pay the fees for the payment order. Only applies to wire pay
+      # @param charge_bearer [Symbol, ModernTreasury::Models::PaymentOrderCreateParams::ChargeBearer, nil] The party that will pay the fees for the payment order. Only applies to wire pay
       #
-      # @param currency [Symbol, ModernTreasury::Currency] Defaults to the currency of the originating account.
+      # @param currency [Symbol, ModernTreasury::Models::Currency] Defaults to the currency of the originating account.
       #
       # @param description [String, nil] An optional description for internal use.
       #
-      # @param documents [Array<ModernTreasury::PaymentOrderCreateParams::Document>] An array of documents to be attached to the payment order. Note that if you atta
+      # @param documents [Array<ModernTreasury::Models::PaymentOrderCreateParams::Document>] An array of documents to be attached to the payment order. Note that if you atta
       #
       # @param effective_date [Date] Date transactions are to be posted to the participants' account. Defaults to the
       #
       # @param expires_at [Time, nil] RFP payments require an expires_at. This value must be past the effective_date.
       #
-      # @param fallback_type [Symbol, ModernTreasury::PaymentOrderCreateParams::FallbackType] A payment type to fallback to if the original type is not valid for the receivin
+      # @param fallback_type [Symbol, ModernTreasury::Models::PaymentOrderCreateParams::FallbackType] A payment type to fallback to if the original type is not valid for the receivin
       #
       # @param foreign_exchange_contract [String, nil] If present, indicates a specific foreign exchange contract number that has been
       #
-      # @param foreign_exchange_indicator [Symbol, ModernTreasury::PaymentOrderCreateParams::ForeignExchangeIndicator, nil] Indicates the type of FX transfer to initiate, can be either `variable_to_fixed`
+      # @param foreign_exchange_indicator [Symbol, ModernTreasury::Models::PaymentOrderCreateParams::ForeignExchangeIndicator, nil] Indicates the type of FX transfer to initiate, can be either `variable_to_fixed`
       #
-      # @param ledger_transaction [ModernTreasury::PaymentOrderCreateParams::LedgerTransaction] Specifies a ledger transaction object that will be created with the payment orde
+      # @param ledger_transaction [ModernTreasury::Models::PaymentOrderCreateParams::LedgerTransaction] Specifies a ledger transaction object that will be created with the payment orde
       #
       # @param ledger_transaction_id [String] Either ledger_transaction or ledger_transaction_id can be provided. Only a pendi
       #
-      # @param line_items [Array<ModernTreasury::PaymentOrderCreateParams::LineItem>] An array of line items that must sum up to the amount of the payment order.
+      # @param line_items [Array<ModernTreasury::Models::PaymentOrderCreateParams::LineItem>] An array of line items that must sum up to the amount of the payment order.
       #
       # @param metadata [Hash{Symbol=>String}] Additional data represented as key-value pairs. Both the key and value must be s
       #
@@ -57,13 +57,13 @@ module ModernTreasury
       #
       # @param originating_party_name [String, nil] If present, this will replace your default company name on receiver's bank state
       #
-      # @param priority [Symbol, ModernTreasury::PaymentOrderCreateParams::Priority] Either `normal` or `high`. For ACH and EFT payments, `high` represents a same-da
+      # @param priority [Symbol, ModernTreasury::Models::PaymentOrderCreateParams::Priority] Either `normal` or `high`. For ACH and EFT payments, `high` represents a same-da
       #
       # @param process_after [Time, nil] If present, Modern Treasury will not process the payment until after this time.
       #
       # @param purpose [String, nil] For `wire`, this is usually the purpose which is transmitted via the "InstrForDb
       #
-      # @param receiving_account [ModernTreasury::PaymentOrderCreateParams::ReceivingAccount] Either `receiving_account` or `receiving_account_id` must be present. When using
+      # @param receiving_account [ModernTreasury::Models::PaymentOrderCreateParams::ReceivingAccount] Either `receiving_account` or `receiving_account_id` must be present. When using
       #
       # @param receiving_account_id [String] Either `receiving_account` or `receiving_account_id` must be present. When using
       #
@@ -73,7 +73,7 @@ module ModernTreasury
       #
       # @param statement_descriptor [String, nil] An optional descriptor which will appear in the receiver's statement. For `check
       #
-      # @param subtype [Symbol, ModernTreasury::PaymentOrderSubtype, nil] An additional layer of classification for the type of payment order you are doin
+      # @param subtype [Symbol, ModernTreasury::Models::PaymentOrderSubtype, nil] An additional layer of classification for the type of payment order you are doin
       #
       # @param transaction_monitoring_enabled [Boolean] A flag that determines whether a payment order should go through transaction mon
       #
@@ -87,7 +87,7 @@ module ModernTreasury
       #
       # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [ModernTreasury::PaymentOrder]
+      # @return [ModernTreasury::Models::PaymentOrder]
       #
       # @see ModernTreasury::Models::PaymentOrderCreateParams
       def create(params)
@@ -108,7 +108,7 @@ module ModernTreasury
       # @param id [String]
       # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [ModernTreasury::PaymentOrder]
+      # @return [ModernTreasury::Models::PaymentOrder]
       #
       # @see ModernTreasury::Models::PaymentOrderRetrieveParams
       def retrieve(id, params = {})
@@ -129,7 +129,7 @@ module ModernTreasury
       #
       # @param id [String]
       #
-      # @param accounting [ModernTreasury::PaymentOrderUpdateParams::Accounting]
+      # @param accounting [ModernTreasury::Models::PaymentOrderUpdateParams::Accounting]
       #
       # @param accounting_category_id [String, nil] The ID of one of your accounting categories. Note that these will only be access
       #
@@ -137,27 +137,27 @@ module ModernTreasury
       #
       # @param amount [Integer] Value in specified currency's smallest unit. e.g. $10 would be represented as 10
       #
-      # @param charge_bearer [Symbol, ModernTreasury::PaymentOrderUpdateParams::ChargeBearer, nil] The party that will pay the fees for the payment order. Only applies to wire pay
+      # @param charge_bearer [Symbol, ModernTreasury::Models::PaymentOrderUpdateParams::ChargeBearer, nil] The party that will pay the fees for the payment order. Only applies to wire pay
       #
       # @param counterparty_id [String, nil] Required when receiving_account_id is passed the ID of an external account.
       #
-      # @param currency [Symbol, ModernTreasury::Currency] Defaults to the currency of the originating account.
+      # @param currency [Symbol, ModernTreasury::Models::Currency] Defaults to the currency of the originating account.
       #
       # @param description [String, nil] An optional description for internal use.
       #
-      # @param direction [Symbol, ModernTreasury::PaymentOrderUpdateParams::Direction] One of `credit`, `debit`. Describes the direction money is flowing in the transa
+      # @param direction [Symbol, ModernTreasury::Models::PaymentOrderUpdateParams::Direction] One of `credit`, `debit`. Describes the direction money is flowing in the transa
       #
       # @param effective_date [Date] Date transactions are to be posted to the participants' account. Defaults to the
       #
       # @param expires_at [Time, nil] RFP payments require an expires_at. This value must be past the effective_date.
       #
-      # @param fallback_type [Symbol, ModernTreasury::PaymentOrderUpdateParams::FallbackType] A payment type to fallback to if the original type is not valid for the receivin
+      # @param fallback_type [Symbol, ModernTreasury::Models::PaymentOrderUpdateParams::FallbackType] A payment type to fallback to if the original type is not valid for the receivin
       #
       # @param foreign_exchange_contract [String, nil] If present, indicates a specific foreign exchange contract number that has been
       #
-      # @param foreign_exchange_indicator [Symbol, ModernTreasury::PaymentOrderUpdateParams::ForeignExchangeIndicator, nil] Indicates the type of FX transfer to initiate, can be either `variable_to_fixed`
+      # @param foreign_exchange_indicator [Symbol, ModernTreasury::Models::PaymentOrderUpdateParams::ForeignExchangeIndicator, nil] Indicates the type of FX transfer to initiate, can be either `variable_to_fixed`
       #
-      # @param line_items [Array<ModernTreasury::PaymentOrderUpdateParams::LineItem>] An array of line items that must sum up to the amount of the payment order.
+      # @param line_items [Array<ModernTreasury::Models::PaymentOrderUpdateParams::LineItem>] An array of line items that must sum up to the amount of the payment order.
       #
       # @param metadata [Hash{Symbol=>String}] Additional data represented as key-value pairs. Both the key and value must be s
       #
@@ -167,13 +167,13 @@ module ModernTreasury
       #
       # @param originating_party_name [String, nil] If present, this will replace your default company name on receiver's bank state
       #
-      # @param priority [Symbol, ModernTreasury::PaymentOrderUpdateParams::Priority] Either `normal` or `high`. For ACH and EFT payments, `high` represents a same-da
+      # @param priority [Symbol, ModernTreasury::Models::PaymentOrderUpdateParams::Priority] Either `normal` or `high`. For ACH and EFT payments, `high` represents a same-da
       #
       # @param process_after [Time, nil] If present, Modern Treasury will not process the payment until after this time.
       #
       # @param purpose [String, nil] For `wire`, this is usually the purpose which is transmitted via the "InstrForDb
       #
-      # @param receiving_account [ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount] Either `receiving_account` or `receiving_account_id` must be present. When using
+      # @param receiving_account [ModernTreasury::Models::PaymentOrderUpdateParams::ReceivingAccount] Either `receiving_account` or `receiving_account_id` must be present. When using
       #
       # @param receiving_account_id [String] Either `receiving_account` or `receiving_account_id` must be present. When using
       #
@@ -183,11 +183,11 @@ module ModernTreasury
       #
       # @param statement_descriptor [String, nil] An optional descriptor which will appear in the receiver's statement. For `check
       #
-      # @param status [Symbol, ModernTreasury::PaymentOrderUpdateParams::Status] To cancel a payment order, use `cancelled`. To redraft a returned payment order,
+      # @param status [Symbol, ModernTreasury::Models::PaymentOrderUpdateParams::Status] To cancel a payment order, use `cancelled`. To redraft a returned payment order,
       #
-      # @param subtype [Symbol, ModernTreasury::PaymentOrderSubtype, nil] An additional layer of classification for the type of payment order you are doin
+      # @param subtype [Symbol, ModernTreasury::Models::PaymentOrderSubtype, nil] An additional layer of classification for the type of payment order you are doin
       #
-      # @param type [Symbol, ModernTreasury::PaymentOrderType] One of `ach`, `se_bankgirot`, `eft`, `wire`, `check`, `sen`, `book`, `rtp`, `sep
+      # @param type [Symbol, ModernTreasury::Models::PaymentOrderType] One of `ach`, `se_bankgirot`, `eft`, `wire`, `check`, `sen`, `book`, `rtp`, `sep
       #
       # @param ultimate_originating_party_identifier [String, nil] This represents the identifier by which the person is known to the receiver when
       #
@@ -199,7 +199,7 @@ module ModernTreasury
       #
       # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [ModernTreasury::PaymentOrder]
+      # @return [ModernTreasury::Models::PaymentOrder]
       #
       # @see ModernTreasury::Models::PaymentOrderUpdateParams
       def update(id, params = {})
@@ -228,7 +228,7 @@ module ModernTreasury
       #
       # @param created_at_start [Date] An inclusive lower bound for searching created_at
       #
-      # @param direction [Symbol, ModernTreasury::TransactionDirection]
+      # @param direction [Symbol, ModernTreasury::Models::TransactionDirection]
       #
       # @param effective_date_end [Date] An inclusive upper bound for searching effective_date
       #
@@ -240,7 +240,7 @@ module ModernTreasury
       #
       # @param per_page [Integer]
       #
-      # @param priority [Symbol, ModernTreasury::PaymentOrderListParams::Priority] Either `normal` or `high`. For ACH and EFT payments, `high` represents a same-da
+      # @param priority [Symbol, ModernTreasury::Models::PaymentOrderListParams::Priority] Either `normal` or `high`. For ACH and EFT payments, `high` represents a same-da
       #
       # @param process_after_end [Time] An inclusive upper bound for searching process_after
       #
@@ -248,15 +248,15 @@ module ModernTreasury
       #
       # @param reference_number [String] Query for records with the provided reference number
       #
-      # @param status [Symbol, ModernTreasury::PaymentOrderListParams::Status]
+      # @param status [Symbol, ModernTreasury::Models::PaymentOrderListParams::Status]
       #
       # @param transaction_id [String] The ID of a transaction that the payment order has been reconciled to.
       #
-      # @param type [Symbol, ModernTreasury::PaymentOrderListParams::Type]
+      # @param type [Symbol, ModernTreasury::Models::PaymentOrderListParams::Type]
       #
       # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [ModernTreasury::Internal::Page<ModernTreasury::PaymentOrder>]
+      # @return [ModernTreasury::Internal::Page<ModernTreasury::Models::PaymentOrder>]
       #
       # @see ModernTreasury::Models::PaymentOrderListParams
       def list(params = {})
@@ -280,21 +280,21 @@ module ModernTreasury
       #
       # @param amount [Integer] Value in specified currency's smallest unit. e.g. $10 would be represented as 10
       #
-      # @param direction [Symbol, ModernTreasury::PaymentOrderCreateAsyncParams::Direction] One of `credit`, `debit`. Describes the direction money is flowing in the transa
+      # @param direction [Symbol, ModernTreasury::Models::PaymentOrderCreateAsyncParams::Direction] One of `credit`, `debit`. Describes the direction money is flowing in the transa
       #
       # @param originating_account_id [String] The ID of one of your organization's internal accounts.
       #
-      # @param type [Symbol, ModernTreasury::PaymentOrderType] One of `ach`, `se_bankgirot`, `eft`, `wire`, `check`, `sen`, `book`, `rtp`, `sep
+      # @param type [Symbol, ModernTreasury::Models::PaymentOrderType] One of `ach`, `se_bankgirot`, `eft`, `wire`, `check`, `sen`, `book`, `rtp`, `sep
       #
-      # @param accounting [ModernTreasury::PaymentOrderCreateAsyncParams::Accounting]
+      # @param accounting [ModernTreasury::Models::PaymentOrderCreateAsyncParams::Accounting]
       #
       # @param accounting_category_id [String, nil] The ID of one of your accounting categories. Note that these will only be access
       #
       # @param accounting_ledger_class_id [String, nil] The ID of one of your accounting ledger classes. Note that these will only be ac
       #
-      # @param charge_bearer [Symbol, ModernTreasury::PaymentOrderCreateAsyncParams::ChargeBearer, nil] The party that will pay the fees for the payment order. Only applies to wire pay
+      # @param charge_bearer [Symbol, ModernTreasury::Models::PaymentOrderCreateAsyncParams::ChargeBearer, nil] The party that will pay the fees for the payment order. Only applies to wire pay
       #
-      # @param currency [Symbol, ModernTreasury::Currency] Defaults to the currency of the originating account.
+      # @param currency [Symbol, ModernTreasury::Models::Currency] Defaults to the currency of the originating account.
       #
       # @param description [String, nil] An optional description for internal use.
       #
@@ -302,17 +302,17 @@ module ModernTreasury
       #
       # @param expires_at [Time, nil] RFP payments require an expires_at. This value must be past the effective_date.
       #
-      # @param fallback_type [Symbol, ModernTreasury::PaymentOrderCreateAsyncParams::FallbackType] A payment type to fallback to if the original type is not valid for the receivin
+      # @param fallback_type [Symbol, ModernTreasury::Models::PaymentOrderCreateAsyncParams::FallbackType] A payment type to fallback to if the original type is not valid for the receivin
       #
       # @param foreign_exchange_contract [String, nil] If present, indicates a specific foreign exchange contract number that has been
       #
-      # @param foreign_exchange_indicator [Symbol, ModernTreasury::PaymentOrderCreateAsyncParams::ForeignExchangeIndicator, nil] Indicates the type of FX transfer to initiate, can be either `variable_to_fixed`
+      # @param foreign_exchange_indicator [Symbol, ModernTreasury::Models::PaymentOrderCreateAsyncParams::ForeignExchangeIndicator, nil] Indicates the type of FX transfer to initiate, can be either `variable_to_fixed`
       #
-      # @param ledger_transaction [ModernTreasury::PaymentOrderCreateAsyncParams::LedgerTransaction] Specifies a ledger transaction object that will be created with the payment orde
+      # @param ledger_transaction [ModernTreasury::Models::PaymentOrderCreateAsyncParams::LedgerTransaction] Specifies a ledger transaction object that will be created with the payment orde
       #
       # @param ledger_transaction_id [String] Either ledger_transaction or ledger_transaction_id can be provided. Only a pendi
       #
-      # @param line_items [Array<ModernTreasury::PaymentOrderCreateAsyncParams::LineItem>] An array of line items that must sum up to the amount of the payment order.
+      # @param line_items [Array<ModernTreasury::Models::PaymentOrderCreateAsyncParams::LineItem>] An array of line items that must sum up to the amount of the payment order.
       #
       # @param metadata [Hash{Symbol=>String}] Additional data represented as key-value pairs. Both the key and value must be s
       #
@@ -320,13 +320,13 @@ module ModernTreasury
       #
       # @param originating_party_name [String, nil] If present, this will replace your default company name on receiver's bank state
       #
-      # @param priority [Symbol, ModernTreasury::PaymentOrderCreateAsyncParams::Priority] Either `normal` or `high`. For ACH and EFT payments, `high` represents a same-da
+      # @param priority [Symbol, ModernTreasury::Models::PaymentOrderCreateAsyncParams::Priority] Either `normal` or `high`. For ACH and EFT payments, `high` represents a same-da
       #
       # @param process_after [Time, nil] If present, Modern Treasury will not process the payment until after this time.
       #
       # @param purpose [String, nil] For `wire`, this is usually the purpose which is transmitted via the "InstrForDb
       #
-      # @param receiving_account [ModernTreasury::PaymentOrderCreateAsyncParams::ReceivingAccount] Either `receiving_account` or `receiving_account_id` must be present. When using
+      # @param receiving_account [ModernTreasury::Models::PaymentOrderCreateAsyncParams::ReceivingAccount] Either `receiving_account` or `receiving_account_id` must be present. When using
       #
       # @param receiving_account_id [String] Either `receiving_account` or `receiving_account_id` must be present. When using
       #
@@ -336,7 +336,7 @@ module ModernTreasury
       #
       # @param statement_descriptor [String, nil] An optional descriptor which will appear in the receiver's statement. For `check
       #
-      # @param subtype [Symbol, ModernTreasury::PaymentOrderSubtype, nil] An additional layer of classification for the type of payment order you are doin
+      # @param subtype [Symbol, ModernTreasury::Models::PaymentOrderSubtype, nil] An additional layer of classification for the type of payment order you are doin
       #
       # @param transaction_monitoring_enabled [Boolean] A flag that determines whether a payment order should go through transaction mon
       #
@@ -350,7 +350,7 @@ module ModernTreasury
       #
       # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [ModernTreasury::AsyncResponse]
+      # @return [ModernTreasury::Models::AsyncResponse]
       #
       # @see ModernTreasury::Models::PaymentOrderCreateAsyncParams
       def create_async(params)

data/lib/modern_treasury/resources/payment_references.rb

@@ -11,7 +11,7 @@ module ModernTreasury
       #
       # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [ModernTreasury::PaymentReference]
+      # @return [ModernTreasury::Models::PaymentReference]
       #
       # @see ModernTreasury::Models::PaymentReferenceRetrieveParams
       def retrieve(id, params = {})
@@ -38,11 +38,11 @@ module ModernTreasury
       #
       # @param referenceable_id [String] The id of the referenceable to search for. Must be accompanied by the referencea
       #
-      # @param referenceable_type [Symbol, ModernTreasury::PaymentReferenceListParams::ReferenceableType] One of the referenceable types. This must be accompanied by the id of the refere
+      # @param referenceable_type [Symbol, ModernTreasury::Models::PaymentReferenceListParams::ReferenceableType] One of the referenceable types. This must be accompanied by the id of the refere
       #
       # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [ModernTreasury::Internal::Page<ModernTreasury::PaymentReference>]
+      # @return [ModernTreasury::Internal::Page<ModernTreasury::Models::PaymentReference>]
       #
       # @see ModernTreasury::Models::PaymentReferenceListParams
       def list(params = {})

data/lib/modern_treasury/resources/returns.rb

@@ -12,11 +12,11 @@ module ModernTreasury
       #
       # @param returnable_id [String, nil] The ID of the object being returned or `null`.
       #
-      # @param returnable_type [Symbol, ModernTreasury::ReturnCreateParams::ReturnableType] The type of object being returned. Currently, this may only be incoming*payment*
+      # @param returnable_type [Symbol, ModernTreasury::Models::ReturnCreateParams::ReturnableType] The type of object being returned. Currently, this may only be incoming*payment*
       #
       # @param additional_information [String, nil] Some returns may include additional information from the bank. In these cases, t
       #
-      # @param code [Symbol, ModernTreasury::ReturnCreateParams::Code, nil] The return code. For ACH returns, this is the required ACH return code.
+      # @param code [Symbol, ModernTreasury::Models::ReturnCreateParams::Code, nil] The return code. For ACH returns, this is the required ACH return code.
       #
       # @param data [Object, nil] The raw data from the return file that we get from the bank.
       #
@@ -26,7 +26,7 @@ module ModernTreasury
       #
       # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [ModernTreasury::ReturnObject]
+      # @return [ModernTreasury::Models::ReturnObject]
       #
       # @see ModernTreasury::Models::ReturnCreateParams
       def create(params)
@@ -48,7 +48,7 @@ module ModernTreasury
       #
       # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [ModernTreasury::ReturnObject]
+      # @return [ModernTreasury::Models::ReturnObject]
       #
       # @see ModernTreasury::Models::ReturnRetrieveParams
       def retrieve(id, params = {})
@@ -77,11 +77,11 @@ module ModernTreasury
       #
       # @param returnable_id [String] The ID of a valid returnable. Must be accompanied by `returnable_type`.
       #
-      # @param returnable_type [Symbol, ModernTreasury::ReturnListParams::ReturnableType] One of `payment_order`, `paper_item`, `reversal`, or `incoming_payment_detail`.
+      # @param returnable_type [Symbol, ModernTreasury::Models::ReturnListParams::ReturnableType] One of `payment_order`, `paper_item`, `reversal`, or `incoming_payment_detail`.
       #
       # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [ModernTreasury::Internal::Page<ModernTreasury::ReturnObject>]
+      # @return [ModernTreasury::Internal::Page<ModernTreasury::Models::ReturnObject>]
       #
       # @see ModernTreasury::Models::ReturnListParams
       def list(params = {})

data/lib/modern_treasury/resources/routing_details.rb

@@ -12,17 +12,17 @@ module ModernTreasury
       #
       # @param account_id [String] Path param: The ID of the account.
       #
-      # @param accounts_type [Symbol, ModernTreasury::RoutingDetailCreateParams::AccountsType] Path param:
+      # @param accounts_type [Symbol, ModernTreasury::Models::RoutingDetailCreateParams::AccountsType] Path param:
       #
       # @param routing_number [String] Body param: The routing number of the bank.
       #
-      # @param routing_number_type [Symbol, ModernTreasury::RoutingDetailCreateParams::RoutingNumberType] Body param: The type of routing number. See https://docs.moderntreasury.com/plat
+      # @param routing_number_type [Symbol, ModernTreasury::Models::RoutingDetailCreateParams::RoutingNumberType] Body param: The type of routing number. See https://docs.moderntreasury.com/plat
       #
-      # @param payment_type [Symbol, ModernTreasury::RoutingDetailCreateParams::PaymentType, nil] Body param: If the routing detail is to be used for a specific payment type this
+      # @param payment_type [Symbol, ModernTreasury::Models::RoutingDetailCreateParams::PaymentType, nil] Body param: If the routing detail is to be used for a specific payment type this
       #
       # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [ModernTreasury::RoutingDetail]
+      # @return [ModernTreasury::Models::RoutingDetail]
       #
       # @see ModernTreasury::Models::RoutingDetailCreateParams
       def create(account_id, params)
@@ -46,13 +46,13 @@ module ModernTreasury
       #
       # @param id [String] The ID of the routing detail.
       #
-      # @param accounts_type [Symbol, ModernTreasury::AccountsType]
+      # @param accounts_type [Symbol, ModernTreasury::Models::AccountsType]
       #
       # @param account_id [String] The ID of the account.
       #
       # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [ModernTreasury::RoutingDetail]
+      # @return [ModernTreasury::Models::RoutingDetail]
       #
       # @see ModernTreasury::Models::RoutingDetailRetrieveParams
       def retrieve(id, params)
@@ -79,7 +79,7 @@ module ModernTreasury
       #
       # @param account_id [String] Path param: The ID of the account.
       #
-      # @param accounts_type [Symbol, ModernTreasury::AccountsType] Path param:
+      # @param accounts_type [Symbol, ModernTreasury::Models::AccountsType] Path param:
       #
       # @param after_cursor [String, nil] Query param:
       #
@@ -87,7 +87,7 @@ module ModernTreasury
       #
       # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [ModernTreasury::Internal::Page<ModernTreasury::RoutingDetail>]
+      # @return [ModernTreasury::Internal::Page<ModernTreasury::Models::RoutingDetail>]
       #
       # @see ModernTreasury::Models::RoutingDetailListParams
       def list(account_id, params)
@@ -112,7 +112,7 @@ module ModernTreasury
       #
       # @param id [String] The ID of the routing detail.
       #
-      # @param accounts_type [Symbol, ModernTreasury::RoutingDetailDeleteParams::AccountsType]
+      # @param accounts_type [Symbol, ModernTreasury::Models::RoutingDetailDeleteParams::AccountsType]
       #
       # @param account_id [String] The ID of the account.
       #

data/lib/modern_treasury/resources/transactions/line_items.rb

@@ -19,7 +19,7 @@ module ModernTreasury
         #
         # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
         #
-        # @return [ModernTreasury::Transactions::TransactionLineItem]
+        # @return [ModernTreasury::Models::Transactions::TransactionLineItem]
         #
         # @see ModernTreasury::Models::Transactions::LineItemCreateParams
         def create(params)
@@ -41,7 +41,7 @@ module ModernTreasury
         #
         # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
         #
-        # @return [ModernTreasury::Transactions::TransactionLineItem]
+        # @return [ModernTreasury::Models::Transactions::TransactionLineItem]
         #
         # @see ModernTreasury::Models::Transactions::LineItemRetrieveParams
         def retrieve(id, params = {})
@@ -61,10 +61,10 @@ module ModernTreasury
         # @param after_cursor [String, nil]
         # @param per_page [Integer]
         # @param transaction_id [String]
-        # @param type [Symbol, ModernTreasury::Transactions::LineItemListParams::Type, nil]
+        # @param type [Symbol, ModernTreasury::Models::Transactions::LineItemListParams::Type, nil]
         # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
         #
-        # @return [ModernTreasury::Internal::Page<ModernTreasury::Transactions::TransactionLineItem>]
+        # @return [ModernTreasury::Internal::Page<ModernTreasury::Models::Transactions::TransactionLineItem>]
         #
         # @see ModernTreasury::Models::Transactions::LineItemListParams
         def list(params = {})

data/lib/modern_treasury/resources/transactions.rb

@@ -29,13 +29,13 @@ module ModernTreasury
       #
       # @param posted [Boolean] This field will be `true` if the transaction has posted to the account.
       #
-      # @param type [Symbol, ModernTreasury::TransactionCreateParams::Type, nil] The type of the transaction. Examples could be `card, `ach`, `wire`, `check`, `r
+      # @param type [Symbol, ModernTreasury::Models::TransactionCreateParams::Type, nil] The type of the transaction. Examples could be `card, `ach`, `wire`, `check`, `r
       #
       # @param vendor_description [String, nil] The transaction detail text that often appears in on your bank statement and in
       #
       # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [ModernTreasury::Transaction]
+      # @return [ModernTreasury::Models::Transaction]
       #
       # @see ModernTreasury::Models::TransactionCreateParams
       def create(params)
@@ -57,7 +57,7 @@ module ModernTreasury
       #
       # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [ModernTreasury::Transaction]
+      # @return [ModernTreasury::Models::Transaction]
       #
       # @see ModernTreasury::Models::TransactionRetrieveParams
       def retrieve(id, params = {})
@@ -82,7 +82,7 @@ module ModernTreasury
       #
       # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [ModernTreasury::Transaction]
+      # @return [ModernTreasury::Models::Transaction]
       #
       # @see ModernTreasury::Models::TransactionUpdateParams
       def update(id, params = {})
@@ -133,7 +133,7 @@ module ModernTreasury
       #
       # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [ModernTreasury::Internal::Page<ModernTreasury::Transaction>]
+      # @return [ModernTreasury::Internal::Page<ModernTreasury::Models::Transaction>]
       #
       # @see ModernTreasury::Models::TransactionListParams
       def list(params = {})

data/lib/modern_treasury/resources/validations.rb

@@ -14,11 +14,11 @@ module ModernTreasury
       #
       # @param routing_number [String] The routing number that is being validated.
       #
-      # @param routing_number_type [Symbol, ModernTreasury::ValidationValidateRoutingNumberParams::RoutingNumberType] The type of routing number. See https://docs.moderntreasury.com/platform/referen
+      # @param routing_number_type [Symbol, ModernTreasury::Models::ValidationValidateRoutingNumberParams::RoutingNumberType] The type of routing number. See https://docs.moderntreasury.com/platform/referen
       #
       # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [ModernTreasury::RoutingNumberLookupRequest]
+      # @return [ModernTreasury::Models::RoutingNumberLookupRequest]
       #
       # @see ModernTreasury::Models::ValidationValidateRoutingNumberParams
       def validate_routing_number(params)

data/lib/modern_treasury/resources/virtual_accounts.rb

@@ -14,7 +14,7 @@ module ModernTreasury
       #
       # @param name [String] The name of the virtual account.
       #
-      # @param account_details [Array<ModernTreasury::VirtualAccountCreateParams::AccountDetail>] An array of account detail objects.
+      # @param account_details [Array<ModernTreasury::Models::VirtualAccountCreateParams::AccountDetail>] An array of account detail objects.
       #
       # @param counterparty_id [String] The ID of the counterparty that the virtual account belongs to.
       #
@@ -24,15 +24,15 @@ module ModernTreasury
       #
       # @param description [String] An optional description for internal use.
       #
-      # @param ledger_account [ModernTreasury::VirtualAccountCreateParams::LedgerAccount] Specifies a ledger account object that will be created with the virtual account.
+      # @param ledger_account [ModernTreasury::Models::VirtualAccountCreateParams::LedgerAccount] Specifies a ledger account object that will be created with the virtual account.
       #
       # @param metadata [Hash{Symbol=>String}] Additional data represented as key-value pairs. Both the key and value must be s
       #
-      # @param routing_details [Array<ModernTreasury::VirtualAccountCreateParams::RoutingDetail>] An array of routing detail objects.
+      # @param routing_details [Array<ModernTreasury::Models::VirtualAccountCreateParams::RoutingDetail>] An array of routing detail objects.
       #
       # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [ModernTreasury::VirtualAccount]
+      # @return [ModernTreasury::Models::VirtualAccount]
       #
       # @see ModernTreasury::Models::VirtualAccountCreateParams
       def create(params)
@@ -54,7 +54,7 @@ module ModernTreasury
       #
       # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [ModernTreasury::VirtualAccount]
+      # @return [ModernTreasury::Models::VirtualAccount]
       #
       # @see ModernTreasury::Models::VirtualAccountRetrieveParams
       def retrieve(id, params = {})
@@ -82,7 +82,7 @@ module ModernTreasury
       #
       # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [ModernTreasury::VirtualAccount]
+      # @return [ModernTreasury::Models::VirtualAccount]
       #
       # @see ModernTreasury::Models::VirtualAccountUpdateParams
       def update(id, params = {})
@@ -115,7 +115,7 @@ module ModernTreasury
       #
       # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [ModernTreasury::Internal::Page<ModernTreasury::VirtualAccount>]
+      # @return [ModernTreasury::Internal::Page<ModernTreasury::Models::VirtualAccount>]
       #
       # @see ModernTreasury::Models::VirtualAccountListParams
       def list(params = {})
@@ -138,7 +138,7 @@ module ModernTreasury
       #
       # @param request_options [ModernTreasury::RequestOptions, Hash{Symbol=>Object}, nil]
       #
-      # @return [ModernTreasury::VirtualAccount]
+      # @return [ModernTreasury::Models::VirtualAccount]
       #
       # @see ModernTreasury::Models::VirtualAccountDeleteParams
       def delete(id, params = {})

data/lib/modern_treasury/version.rb

@@ -1,5 +1,5 @@
 # frozen_string_literal: true
 
 module ModernTreasury
-  VERSION = "0.1.0.pre.alpha.19"
+  VERSION = "0.1.0.pre.alpha.21"
 end

data/lib/modern_treasury.rb

@@ -20,7 +20,9 @@ require "uri"
 
 # We already ship the preferred sorbet manifests in the package itself.
 # `tapioca` currently does not offer us a way to opt out of unnecessary compilation.
-if Object.const_defined?(:Tapioca) && caller.chain([$PROGRAM_NAME]).chain(ARGV).grep(/tapioca/)
+if Object.const_defined?(:Tapioca) &&
+   caller.chain([$PROGRAM_NAME]).chain(ARGV).any?(/tapioca/) &&
+   ARGV.none?(/dsl/)
   return
 end
 
@@ -218,6 +220,14 @@ require_relative "modern_treasury/models/line_item_update_params"
 require_relative "modern_treasury/models/paper_item"
 require_relative "modern_treasury/models/paper_item_list_params"
 require_relative "modern_treasury/models/paper_item_retrieve_params"
+require_relative "modern_treasury/models/payment_action_create_params"
+require_relative "modern_treasury/models/payment_action_create_response"
+require_relative "modern_treasury/models/payment_action_list_params"
+require_relative "modern_treasury/models/payment_action_list_response"
+require_relative "modern_treasury/models/payment_action_retrieve_params"
+require_relative "modern_treasury/models/payment_action_retrieve_response"
+require_relative "modern_treasury/models/payment_action_update_params"
+require_relative "modern_treasury/models/payment_action_update_response"
 require_relative "modern_treasury/models/payment_flow"
 require_relative "modern_treasury/models/payment_flow_create_params"
 require_relative "modern_treasury/models/payment_flow_list_params"
@@ -305,6 +315,7 @@ require_relative "modern_treasury/resources/legal_entities"
 require_relative "modern_treasury/resources/legal_entity_associations"
 require_relative "modern_treasury/resources/line_items"
 require_relative "modern_treasury/resources/paper_items"
+require_relative "modern_treasury/resources/payment_actions"
 require_relative "modern_treasury/resources/payment_flows"
 require_relative "modern_treasury/resources/payment_orders"
 require_relative "modern_treasury/resources/payment_orders/reversals"

data/rbi/modern_treasury/client.rbi

@@ -127,6 +127,9 @@ module ModernTreasury
     sig { returns(ModernTreasury::Resources::LegalEntityAssociations) }
     attr_reader :legal_entity_associations
 
+    sig { returns(ModernTreasury::Resources::PaymentActions) }
+    attr_reader :payment_actions
+
     # A test endpoint often used to confirm credentials and headers are being passed
     # in correctly.
     sig do