modern_treasury 0.1.0.pre.alpha.18 → 0.1.0.pre.alpha.19

data/rbi/modern_treasury/models/payment_order_update_params.rbi

@@ -0,0 +1,2096 @@
+# typed: strong
+
+module ModernTreasury
+  module Models
+    class PaymentOrderUpdateParams < ModernTreasury::Internal::Type::BaseModel
+      extend ModernTreasury::Internal::Type::RequestParameters::Converter
+      include ModernTreasury::Internal::Type::RequestParameters
+
+      OrHash =
+        T.type_alias do
+          T.any(
+            ModernTreasury::PaymentOrderUpdateParams,
+            ModernTreasury::Internal::AnyHash
+          )
+        end
+
+      sig do
+        returns(T.nilable(ModernTreasury::PaymentOrderUpdateParams::Accounting))
+      end
+      attr_reader :accounting
+
+      sig do
+        params(
+          accounting:
+            ModernTreasury::PaymentOrderUpdateParams::Accounting::OrHash
+        ).void
+      end
+      attr_writer :accounting
+
+      # The ID of one of your accounting categories. Note that these will only be
+      # accessible if your accounting system has been connected.
+      sig { returns(T.nilable(String)) }
+      attr_accessor :accounting_category_id
+
+      # The ID of one of your accounting ledger classes. Note that these will only be
+      # accessible if your accounting system has been connected.
+      sig { returns(T.nilable(String)) }
+      attr_accessor :accounting_ledger_class_id
+
+      # Value in specified currency's smallest unit. e.g. $10 would be represented as
+      # 1000 (cents). For RTP, the maximum amount allowed by the network is $100,000.
+      sig { returns(T.nilable(Integer)) }
+      attr_reader :amount
+
+      sig { params(amount: Integer).void }
+      attr_writer :amount
+
+      # The party that will pay the fees for the payment order. Only applies to wire
+      # payment orders. Can be one of shared, sender, or receiver, which correspond
+      # respectively with the SWIFT 71A values `SHA`, `OUR`, `BEN`.
+      sig do
+        returns(
+          T.nilable(
+            ModernTreasury::PaymentOrderUpdateParams::ChargeBearer::OrSymbol
+          )
+        )
+      end
+      attr_accessor :charge_bearer
+
+      # Required when receiving_account_id is passed the ID of an external account.
+      sig { returns(T.nilable(String)) }
+      attr_accessor :counterparty_id
+
+      # Defaults to the currency of the originating account.
+      sig { returns(T.nilable(ModernTreasury::Currency::OrSymbol)) }
+      attr_reader :currency
+
+      sig { params(currency: ModernTreasury::Currency::OrSymbol).void }
+      attr_writer :currency
+
+      # An optional description for internal use.
+      sig { returns(T.nilable(String)) }
+      attr_accessor :description
+
+      # One of `credit`, `debit`. Describes the direction money is flowing in the
+      # transaction. A `credit` moves money from your account to someone else's. A
+      # `debit` pulls money from someone else's account to your own. Note that wire,
+      # rtp, and check payments will always be `credit`.
+      sig do
+        returns(
+          T.nilable(
+            ModernTreasury::PaymentOrderUpdateParams::Direction::OrSymbol
+          )
+        )
+      end
+      attr_reader :direction
+
+      sig do
+        params(
+          direction:
+            ModernTreasury::PaymentOrderUpdateParams::Direction::OrSymbol
+        ).void
+      end
+      attr_writer :direction
+
+      # Date transactions are to be posted to the participants' account. Defaults to the
+      # current business day or the next business day if the current day is a bank
+      # holiday or weekend. Format: yyyy-mm-dd.
+      sig { returns(T.nilable(Date)) }
+      attr_reader :effective_date
+
+      sig { params(effective_date: Date).void }
+      attr_writer :effective_date
+
+      # RFP payments require an expires_at. This value must be past the effective_date.
+      sig { returns(T.nilable(Time)) }
+      attr_accessor :expires_at
+
+      # A payment type to fallback to if the original type is not valid for the
+      # receiving account. Currently, this only supports falling back from RTP to ACH
+      # (type=rtp and fallback_type=ach)
+      sig do
+        returns(
+          T.nilable(
+            ModernTreasury::PaymentOrderUpdateParams::FallbackType::OrSymbol
+          )
+        )
+      end
+      attr_reader :fallback_type
+
+      sig do
+        params(
+          fallback_type:
+            ModernTreasury::PaymentOrderUpdateParams::FallbackType::OrSymbol
+        ).void
+      end
+      attr_writer :fallback_type
+
+      # If present, indicates a specific foreign exchange contract number that has been
+      # generated by your financial institution.
+      sig { returns(T.nilable(String)) }
+      attr_accessor :foreign_exchange_contract
+
+      # Indicates the type of FX transfer to initiate, can be either
+      # `variable_to_fixed`, `fixed_to_variable`, or `null` if the payment order
+      # currency matches the originating account currency.
+      sig do
+        returns(
+          T.nilable(
+            ModernTreasury::PaymentOrderUpdateParams::ForeignExchangeIndicator::OrSymbol
+          )
+        )
+      end
+      attr_accessor :foreign_exchange_indicator
+
+      # An array of line items that must sum up to the amount of the payment order.
+      sig do
+        returns(
+          T.nilable(
+            T::Array[ModernTreasury::PaymentOrderUpdateParams::LineItem]
+          )
+        )
+      end
+      attr_reader :line_items
+
+      sig do
+        params(
+          line_items:
+            T::Array[ModernTreasury::PaymentOrderUpdateParams::LineItem::OrHash]
+        ).void
+      end
+      attr_writer :line_items
+
+      # Additional data represented as key-value pairs. Both the key and value must be
+      # strings.
+      sig { returns(T.nilable(T::Hash[Symbol, String])) }
+      attr_reader :metadata
+
+      sig { params(metadata: T::Hash[Symbol, String]).void }
+      attr_writer :metadata
+
+      # A boolean to determine if NSF Protection is enabled for this payment order. Note
+      # that this setting must also be turned on in your organization settings page.
+      sig { returns(T.nilable(T::Boolean)) }
+      attr_reader :nsf_protected
+
+      sig { params(nsf_protected: T::Boolean).void }
+      attr_writer :nsf_protected
+
+      # The ID of one of your organization's internal accounts.
+      sig { returns(T.nilable(String)) }
+      attr_reader :originating_account_id
+
+      sig { params(originating_account_id: String).void }
+      attr_writer :originating_account_id
+
+      # If present, this will replace your default company name on receiver's bank
+      # statement. This field can only be used for ACH payments currently. For ACH, only
+      # the first 16 characters of this string will be used. Any additional characters
+      # will be truncated.
+      sig { returns(T.nilable(String)) }
+      attr_accessor :originating_party_name
+
+      # Either `normal` or `high`. For ACH and EFT payments, `high` represents a
+      # same-day ACH or EFT transfer, respectively. For check payments, `high` can mean
+      # an overnight check rather than standard mail.
+      sig do
+        returns(
+          T.nilable(
+            ModernTreasury::PaymentOrderUpdateParams::Priority::OrSymbol
+          )
+        )
+      end
+      attr_reader :priority
+
+      sig do
+        params(
+          priority: ModernTreasury::PaymentOrderUpdateParams::Priority::OrSymbol
+        ).void
+      end
+      attr_writer :priority
+
+      # If present, Modern Treasury will not process the payment until after this time.
+      # If `process_after` is past the cutoff for `effective_date`, `process_after` will
+      # take precedence and `effective_date` will automatically update to reflect the
+      # earliest possible sending date after `process_after`. Format is ISO8601
+      # timestamp.
+      sig { returns(T.nilable(Time)) }
+      attr_accessor :process_after
+
+      # For `wire`, this is usually the purpose which is transmitted via the
+      # "InstrForDbtrAgt" field in the ISO20022 file. For `eft`, this field is the 3
+      # digit CPA Code that will be attached to the payment.
+      sig { returns(T.nilable(String)) }
+      attr_accessor :purpose
+
+      # Either `receiving_account` or `receiving_account_id` must be present. When using
+      # `receiving_account_id`, you may pass the id of an external account or an
+      # internal account.
+      sig do
+        returns(
+          T.nilable(ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount)
+        )
+      end
+      attr_reader :receiving_account
+
+      sig do
+        params(
+          receiving_account:
+            ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::OrHash
+        ).void
+      end
+      attr_writer :receiving_account
+
+      # Either `receiving_account` or `receiving_account_id` must be present. When using
+      # `receiving_account_id`, you may pass the id of an external account or an
+      # internal account.
+      sig { returns(T.nilable(String)) }
+      attr_reader :receiving_account_id
+
+      sig { params(receiving_account_id: String).void }
+      attr_writer :receiving_account_id
+
+      # For `ach`, this field will be passed through on an addenda record. For `wire`
+      # payments the field will be passed through as the "Originator to Beneficiary
+      # Information", also known as OBI or Fedwire tag 6000.
+      sig { returns(T.nilable(String)) }
+      attr_accessor :remittance_information
+
+      # Send an email to the counterparty when the payment order is sent to the bank. If
+      # `null`, `send_remittance_advice` on the Counterparty is used.
+      sig { returns(T.nilable(T::Boolean)) }
+      attr_accessor :send_remittance_advice
+
+      # An optional descriptor which will appear in the receiver's statement. For
+      # `check` payments this field will be used as the memo line. For `ach` the maximum
+      # length is 10 characters. Note that for ACH payments, the name on your bank
+      # account will be included automatically by the bank, so you can use the
+      # characters for other useful information. For `eft` the maximum length is 15
+      # characters.
+      sig { returns(T.nilable(String)) }
+      attr_accessor :statement_descriptor
+
+      # To cancel a payment order, use `cancelled`. To redraft a returned payment order,
+      # use `approved`. To undo approval on a denied or approved payment order, use
+      # `needs_approval`.
+      sig do
+        returns(
+          T.nilable(ModernTreasury::PaymentOrderUpdateParams::Status::OrSymbol)
+        )
+      end
+      attr_reader :status
+
+      sig do
+        params(
+          status: ModernTreasury::PaymentOrderUpdateParams::Status::OrSymbol
+        ).void
+      end
+      attr_writer :status
+
+      # An additional layer of classification for the type of payment order you are
+      # doing. This field is only used for `ach` payment orders currently. For `ach`
+      # payment orders, the `subtype` represents the SEC code. We currently support
+      # `CCD`, `PPD`, `IAT`, `CTX`, `WEB`, `CIE`, and `TEL`.
+      sig { returns(T.nilable(ModernTreasury::PaymentOrderSubtype::OrSymbol)) }
+      attr_accessor :subtype
+
+      # One of `ach`, `se_bankgirot`, `eft`, `wire`, `check`, `sen`, `book`, `rtp`,
+      # `sepa`, `bacs`, `au_becs`, `interac`, `neft`, `nics`,
+      # `nz_national_clearing_code`, `sic`, `signet`, `provexchange`, `zengin`.
+      sig { returns(T.nilable(ModernTreasury::PaymentOrderType::OrSymbol)) }
+      attr_reader :type
+
+      sig { params(type: ModernTreasury::PaymentOrderType::OrSymbol).void }
+      attr_writer :type
+
+      # This represents the identifier by which the person is known to the receiver when
+      # using the CIE subtype for ACH payments. Only the first 22 characters of this
+      # string will be used. Any additional characters will be truncated.
+      sig { returns(T.nilable(String)) }
+      attr_accessor :ultimate_originating_party_identifier
+
+      # This represents the name of the person that the payment is on behalf of when
+      # using the CIE subtype for ACH payments. Only the first 15 characters of this
+      # string will be used. Any additional characters will be truncated.
+      sig { returns(T.nilable(String)) }
+      attr_accessor :ultimate_originating_party_name
+
+      # This represents the name of the merchant that the payment is being sent to when
+      # using the CIE subtype for ACH payments. Only the first 22 characters of this
+      # string will be used. Any additional characters will be truncated.
+      sig { returns(T.nilable(String)) }
+      attr_accessor :ultimate_receiving_party_identifier
+
+      # This represents the identifier by which the merchant is known to the person
+      # initiating an ACH payment with CIE subtype. Only the first 15 characters of this
+      # string will be used. Any additional characters will be truncated.
+      sig { returns(T.nilable(String)) }
+      attr_accessor :ultimate_receiving_party_name
+
+      sig do
+        params(
+          accounting:
+            ModernTreasury::PaymentOrderUpdateParams::Accounting::OrHash,
+          accounting_category_id: T.nilable(String),
+          accounting_ledger_class_id: T.nilable(String),
+          amount: Integer,
+          charge_bearer:
+            T.nilable(
+              ModernTreasury::PaymentOrderUpdateParams::ChargeBearer::OrSymbol
+            ),
+          counterparty_id: T.nilable(String),
+          currency: ModernTreasury::Currency::OrSymbol,
+          description: T.nilable(String),
+          direction:
+            ModernTreasury::PaymentOrderUpdateParams::Direction::OrSymbol,
+          effective_date: Date,
+          expires_at: T.nilable(Time),
+          fallback_type:
+            ModernTreasury::PaymentOrderUpdateParams::FallbackType::OrSymbol,
+          foreign_exchange_contract: T.nilable(String),
+          foreign_exchange_indicator:
+            T.nilable(
+              ModernTreasury::PaymentOrderUpdateParams::ForeignExchangeIndicator::OrSymbol
+            ),
+          line_items:
+            T::Array[
+              ModernTreasury::PaymentOrderUpdateParams::LineItem::OrHash
+            ],
+          metadata: T::Hash[Symbol, String],
+          nsf_protected: T::Boolean,
+          originating_account_id: String,
+          originating_party_name: T.nilable(String),
+          priority:
+            ModernTreasury::PaymentOrderUpdateParams::Priority::OrSymbol,
+          process_after: T.nilable(Time),
+          purpose: T.nilable(String),
+          receiving_account:
+            ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::OrHash,
+          receiving_account_id: String,
+          remittance_information: T.nilable(String),
+          send_remittance_advice: T.nilable(T::Boolean),
+          statement_descriptor: T.nilable(String),
+          status: ModernTreasury::PaymentOrderUpdateParams::Status::OrSymbol,
+          subtype: T.nilable(ModernTreasury::PaymentOrderSubtype::OrSymbol),
+          type: ModernTreasury::PaymentOrderType::OrSymbol,
+          ultimate_originating_party_identifier: T.nilable(String),
+          ultimate_originating_party_name: T.nilable(String),
+          ultimate_receiving_party_identifier: T.nilable(String),
+          ultimate_receiving_party_name: T.nilable(String),
+          request_options: ModernTreasury::RequestOptions::OrHash
+        ).returns(T.attached_class)
+      end
+      def self.new(
+        accounting: nil,
+        # The ID of one of your accounting categories. Note that these will only be
+        # accessible if your accounting system has been connected.
+        accounting_category_id: nil,
+        # The ID of one of your accounting ledger classes. Note that these will only be
+        # accessible if your accounting system has been connected.
+        accounting_ledger_class_id: nil,
+        # Value in specified currency's smallest unit. e.g. $10 would be represented as
+        # 1000 (cents). For RTP, the maximum amount allowed by the network is $100,000.
+        amount: nil,
+        # The party that will pay the fees for the payment order. Only applies to wire
+        # payment orders. Can be one of shared, sender, or receiver, which correspond
+        # respectively with the SWIFT 71A values `SHA`, `OUR`, `BEN`.
+        charge_bearer: nil,
+        # Required when receiving_account_id is passed the ID of an external account.
+        counterparty_id: nil,
+        # Defaults to the currency of the originating account.
+        currency: nil,
+        # An optional description for internal use.
+        description: nil,
+        # One of `credit`, `debit`. Describes the direction money is flowing in the
+        # transaction. A `credit` moves money from your account to someone else's. A
+        # `debit` pulls money from someone else's account to your own. Note that wire,
+        # rtp, and check payments will always be `credit`.
+        direction: nil,
+        # Date transactions are to be posted to the participants' account. Defaults to the
+        # current business day or the next business day if the current day is a bank
+        # holiday or weekend. Format: yyyy-mm-dd.
+        effective_date: nil,
+        # RFP payments require an expires_at. This value must be past the effective_date.
+        expires_at: nil,
+        # A payment type to fallback to if the original type is not valid for the
+        # receiving account. Currently, this only supports falling back from RTP to ACH
+        # (type=rtp and fallback_type=ach)
+        fallback_type: nil,
+        # If present, indicates a specific foreign exchange contract number that has been
+        # generated by your financial institution.
+        foreign_exchange_contract: nil,
+        # Indicates the type of FX transfer to initiate, can be either
+        # `variable_to_fixed`, `fixed_to_variable`, or `null` if the payment order
+        # currency matches the originating account currency.
+        foreign_exchange_indicator: nil,
+        # An array of line items that must sum up to the amount of the payment order.
+        line_items: nil,
+        # Additional data represented as key-value pairs. Both the key and value must be
+        # strings.
+        metadata: nil,
+        # A boolean to determine if NSF Protection is enabled for this payment order. Note
+        # that this setting must also be turned on in your organization settings page.
+        nsf_protected: nil,
+        # The ID of one of your organization's internal accounts.
+        originating_account_id: nil,
+        # If present, this will replace your default company name on receiver's bank
+        # statement. This field can only be used for ACH payments currently. For ACH, only
+        # the first 16 characters of this string will be used. Any additional characters
+        # will be truncated.
+        originating_party_name: nil,
+        # Either `normal` or `high`. For ACH and EFT payments, `high` represents a
+        # same-day ACH or EFT transfer, respectively. For check payments, `high` can mean
+        # an overnight check rather than standard mail.
+        priority: nil,
+        # If present, Modern Treasury will not process the payment until after this time.
+        # If `process_after` is past the cutoff for `effective_date`, `process_after` will
+        # take precedence and `effective_date` will automatically update to reflect the
+        # earliest possible sending date after `process_after`. Format is ISO8601
+        # timestamp.
+        process_after: nil,
+        # For `wire`, this is usually the purpose which is transmitted via the
+        # "InstrForDbtrAgt" field in the ISO20022 file. For `eft`, this field is the 3
+        # digit CPA Code that will be attached to the payment.
+        purpose: nil,
+        # Either `receiving_account` or `receiving_account_id` must be present. When using
+        # `receiving_account_id`, you may pass the id of an external account or an
+        # internal account.
+        receiving_account: nil,
+        # Either `receiving_account` or `receiving_account_id` must be present. When using
+        # `receiving_account_id`, you may pass the id of an external account or an
+        # internal account.
+        receiving_account_id: nil,
+        # For `ach`, this field will be passed through on an addenda record. For `wire`
+        # payments the field will be passed through as the "Originator to Beneficiary
+        # Information", also known as OBI or Fedwire tag 6000.
+        remittance_information: nil,
+        # Send an email to the counterparty when the payment order is sent to the bank. If
+        # `null`, `send_remittance_advice` on the Counterparty is used.
+        send_remittance_advice: nil,
+        # An optional descriptor which will appear in the receiver's statement. For
+        # `check` payments this field will be used as the memo line. For `ach` the maximum
+        # length is 10 characters. Note that for ACH payments, the name on your bank
+        # account will be included automatically by the bank, so you can use the
+        # characters for other useful information. For `eft` the maximum length is 15
+        # characters.
+        statement_descriptor: nil,
+        # To cancel a payment order, use `cancelled`. To redraft a returned payment order,
+        # use `approved`. To undo approval on a denied or approved payment order, use
+        # `needs_approval`.
+        status: nil,
+        # An additional layer of classification for the type of payment order you are
+        # doing. This field is only used for `ach` payment orders currently. For `ach`
+        # payment orders, the `subtype` represents the SEC code. We currently support
+        # `CCD`, `PPD`, `IAT`, `CTX`, `WEB`, `CIE`, and `TEL`.
+        subtype: nil,
+        # One of `ach`, `se_bankgirot`, `eft`, `wire`, `check`, `sen`, `book`, `rtp`,
+        # `sepa`, `bacs`, `au_becs`, `interac`, `neft`, `nics`,
+        # `nz_national_clearing_code`, `sic`, `signet`, `provexchange`, `zengin`.
+        type: nil,
+        # This represents the identifier by which the person is known to the receiver when
+        # using the CIE subtype for ACH payments. Only the first 22 characters of this
+        # string will be used. Any additional characters will be truncated.
+        ultimate_originating_party_identifier: nil,
+        # This represents the name of the person that the payment is on behalf of when
+        # using the CIE subtype for ACH payments. Only the first 15 characters of this
+        # string will be used. Any additional characters will be truncated.
+        ultimate_originating_party_name: nil,
+        # This represents the name of the merchant that the payment is being sent to when
+        # using the CIE subtype for ACH payments. Only the first 22 characters of this
+        # string will be used. Any additional characters will be truncated.
+        ultimate_receiving_party_identifier: nil,
+        # This represents the identifier by which the merchant is known to the person
+        # initiating an ACH payment with CIE subtype. Only the first 15 characters of this
+        # string will be used. Any additional characters will be truncated.
+        ultimate_receiving_party_name: nil,
+        request_options: {}
+      )
+      end
+
+      sig do
+        override.returns(
+          {
+            accounting: ModernTreasury::PaymentOrderUpdateParams::Accounting,
+            accounting_category_id: T.nilable(String),
+            accounting_ledger_class_id: T.nilable(String),
+            amount: Integer,
+            charge_bearer:
+              T.nilable(
+                ModernTreasury::PaymentOrderUpdateParams::ChargeBearer::OrSymbol
+              ),
+            counterparty_id: T.nilable(String),
+            currency: ModernTreasury::Currency::OrSymbol,
+            description: T.nilable(String),
+            direction:
+              ModernTreasury::PaymentOrderUpdateParams::Direction::OrSymbol,
+            effective_date: Date,
+            expires_at: T.nilable(Time),
+            fallback_type:
+              ModernTreasury::PaymentOrderUpdateParams::FallbackType::OrSymbol,
+            foreign_exchange_contract: T.nilable(String),
+            foreign_exchange_indicator:
+              T.nilable(
+                ModernTreasury::PaymentOrderUpdateParams::ForeignExchangeIndicator::OrSymbol
+              ),
+            line_items:
+              T::Array[ModernTreasury::PaymentOrderUpdateParams::LineItem],
+            metadata: T::Hash[Symbol, String],
+            nsf_protected: T::Boolean,
+            originating_account_id: String,
+            originating_party_name: T.nilable(String),
+            priority:
+              ModernTreasury::PaymentOrderUpdateParams::Priority::OrSymbol,
+            process_after: T.nilable(Time),
+            purpose: T.nilable(String),
+            receiving_account:
+              ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount,
+            receiving_account_id: String,
+            remittance_information: T.nilable(String),
+            send_remittance_advice: T.nilable(T::Boolean),
+            statement_descriptor: T.nilable(String),
+            status: ModernTreasury::PaymentOrderUpdateParams::Status::OrSymbol,
+            subtype: T.nilable(ModernTreasury::PaymentOrderSubtype::OrSymbol),
+            type: ModernTreasury::PaymentOrderType::OrSymbol,
+            ultimate_originating_party_identifier: T.nilable(String),
+            ultimate_originating_party_name: T.nilable(String),
+            ultimate_receiving_party_identifier: T.nilable(String),
+            ultimate_receiving_party_name: T.nilable(String),
+            request_options: ModernTreasury::RequestOptions
+          }
+        )
+      end
+      def to_hash
+      end
+
+      class Accounting < ModernTreasury::Internal::Type::BaseModel
+        OrHash =
+          T.type_alias do
+            T.any(
+              ModernTreasury::PaymentOrderUpdateParams::Accounting,
+              ModernTreasury::Internal::AnyHash
+            )
+          end
+
+        # The ID of one of your accounting categories. Note that these will only be
+        # accessible if your accounting system has been connected.
+        sig { returns(T.nilable(String)) }
+        attr_accessor :account_id
+
+        # The ID of one of the class objects in your accounting system. Class objects
+        # track segments of your business independent of client or project. Note that
+        # these will only be accessible if your accounting system has been connected.
+        sig { returns(T.nilable(String)) }
+        attr_accessor :class_id
+
+        sig do
+          params(
+            account_id: T.nilable(String),
+            class_id: T.nilable(String)
+          ).returns(T.attached_class)
+        end
+        def self.new(
+          # The ID of one of your accounting categories. Note that these will only be
+          # accessible if your accounting system has been connected.
+          account_id: nil,
+          # The ID of one of the class objects in your accounting system. Class objects
+          # track segments of your business independent of client or project. Note that
+          # these will only be accessible if your accounting system has been connected.
+          class_id: nil
+        )
+        end
+
+        sig do
+          override.returns(
+            { account_id: T.nilable(String), class_id: T.nilable(String) }
+          )
+        end
+        def to_hash
+        end
+      end
+
+      # The party that will pay the fees for the payment order. Only applies to wire
+      # payment orders. Can be one of shared, sender, or receiver, which correspond
+      # respectively with the SWIFT 71A values `SHA`, `OUR`, `BEN`.
+      module ChargeBearer
+        extend ModernTreasury::Internal::Type::Enum
+
+        TaggedSymbol =
+          T.type_alias do
+            T.all(
+              Symbol,
+              ModernTreasury::PaymentOrderUpdateParams::ChargeBearer
+            )
+          end
+        OrSymbol = T.type_alias { T.any(Symbol, String) }
+
+        SHARED =
+          T.let(
+            :shared,
+            ModernTreasury::PaymentOrderUpdateParams::ChargeBearer::TaggedSymbol
+          )
+        SENDER =
+          T.let(
+            :sender,
+            ModernTreasury::PaymentOrderUpdateParams::ChargeBearer::TaggedSymbol
+          )
+        RECEIVER =
+          T.let(
+            :receiver,
+            ModernTreasury::PaymentOrderUpdateParams::ChargeBearer::TaggedSymbol
+          )
+
+        sig do
+          override.returns(
+            T::Array[
+              ModernTreasury::PaymentOrderUpdateParams::ChargeBearer::TaggedSymbol
+            ]
+          )
+        end
+        def self.values
+        end
+      end
+
+      # One of `credit`, `debit`. Describes the direction money is flowing in the
+      # transaction. A `credit` moves money from your account to someone else's. A
+      # `debit` pulls money from someone else's account to your own. Note that wire,
+      # rtp, and check payments will always be `credit`.
+      module Direction
+        extend ModernTreasury::Internal::Type::Enum
+
+        TaggedSymbol =
+          T.type_alias do
+            T.all(Symbol, ModernTreasury::PaymentOrderUpdateParams::Direction)
+          end
+        OrSymbol = T.type_alias { T.any(Symbol, String) }
+
+        CREDIT =
+          T.let(
+            :credit,
+            ModernTreasury::PaymentOrderUpdateParams::Direction::TaggedSymbol
+          )
+        DEBIT =
+          T.let(
+            :debit,
+            ModernTreasury::PaymentOrderUpdateParams::Direction::TaggedSymbol
+          )
+
+        sig do
+          override.returns(
+            T::Array[
+              ModernTreasury::PaymentOrderUpdateParams::Direction::TaggedSymbol
+            ]
+          )
+        end
+        def self.values
+        end
+      end
+
+      # A payment type to fallback to if the original type is not valid for the
+      # receiving account. Currently, this only supports falling back from RTP to ACH
+      # (type=rtp and fallback_type=ach)
+      module FallbackType
+        extend ModernTreasury::Internal::Type::Enum
+
+        TaggedSymbol =
+          T.type_alias do
+            T.all(
+              Symbol,
+              ModernTreasury::PaymentOrderUpdateParams::FallbackType
+            )
+          end
+        OrSymbol = T.type_alias { T.any(Symbol, String) }
+
+        ACH =
+          T.let(
+            :ach,
+            ModernTreasury::PaymentOrderUpdateParams::FallbackType::TaggedSymbol
+          )
+
+        sig do
+          override.returns(
+            T::Array[
+              ModernTreasury::PaymentOrderUpdateParams::FallbackType::TaggedSymbol
+            ]
+          )
+        end
+        def self.values
+        end
+      end
+
+      # Indicates the type of FX transfer to initiate, can be either
+      # `variable_to_fixed`, `fixed_to_variable`, or `null` if the payment order
+      # currency matches the originating account currency.
+      module ForeignExchangeIndicator
+        extend ModernTreasury::Internal::Type::Enum
+
+        TaggedSymbol =
+          T.type_alias do
+            T.all(
+              Symbol,
+              ModernTreasury::PaymentOrderUpdateParams::ForeignExchangeIndicator
+            )
+          end
+        OrSymbol = T.type_alias { T.any(Symbol, String) }
+
+        FIXED_TO_VARIABLE =
+          T.let(
+            :fixed_to_variable,
+            ModernTreasury::PaymentOrderUpdateParams::ForeignExchangeIndicator::TaggedSymbol
+          )
+        VARIABLE_TO_FIXED =
+          T.let(
+            :variable_to_fixed,
+            ModernTreasury::PaymentOrderUpdateParams::ForeignExchangeIndicator::TaggedSymbol
+          )
+
+        sig do
+          override.returns(
+            T::Array[
+              ModernTreasury::PaymentOrderUpdateParams::ForeignExchangeIndicator::TaggedSymbol
+            ]
+          )
+        end
+        def self.values
+        end
+      end
+
+      class LineItem < ModernTreasury::Internal::Type::BaseModel
+        OrHash =
+          T.type_alias do
+            T.any(
+              ModernTreasury::PaymentOrderUpdateParams::LineItem,
+              ModernTreasury::Internal::AnyHash
+            )
+          end
+
+        # Value in specified currency's smallest unit. e.g. $10 would be represented
+        # as 1000.
+        sig { returns(Integer) }
+        attr_accessor :amount
+
+        # The ID of one of your accounting categories. Note that these will only be
+        # accessible if your accounting system has been connected.
+        sig { returns(T.nilable(String)) }
+        attr_accessor :accounting_category_id
+
+        # A free-form description of the line item.
+        sig { returns(T.nilable(String)) }
+        attr_accessor :description
+
+        # Additional data represented as key-value pairs. Both the key and value must be
+        # strings.
+        sig { returns(T.nilable(T::Hash[Symbol, String])) }
+        attr_reader :metadata
+
+        sig { params(metadata: T::Hash[Symbol, String]).void }
+        attr_writer :metadata
+
+        sig do
+          params(
+            amount: Integer,
+            accounting_category_id: T.nilable(String),
+            description: T.nilable(String),
+            metadata: T::Hash[Symbol, String]
+          ).returns(T.attached_class)
+        end
+        def self.new(
+          # Value in specified currency's smallest unit. e.g. $10 would be represented
+          # as 1000.
+          amount:,
+          # The ID of one of your accounting categories. Note that these will only be
+          # accessible if your accounting system has been connected.
+          accounting_category_id: nil,
+          # A free-form description of the line item.
+          description: nil,
+          # Additional data represented as key-value pairs. Both the key and value must be
+          # strings.
+          metadata: nil
+        )
+        end
+
+        sig do
+          override.returns(
+            {
+              amount: Integer,
+              accounting_category_id: T.nilable(String),
+              description: T.nilable(String),
+              metadata: T::Hash[Symbol, String]
+            }
+          )
+        end
+        def to_hash
+        end
+      end
+
+      # Either `normal` or `high`. For ACH and EFT payments, `high` represents a
+      # same-day ACH or EFT transfer, respectively. For check payments, `high` can mean
+      # an overnight check rather than standard mail.
+      module Priority
+        extend ModernTreasury::Internal::Type::Enum
+
+        TaggedSymbol =
+          T.type_alias do
+            T.all(Symbol, ModernTreasury::PaymentOrderUpdateParams::Priority)
+          end
+        OrSymbol = T.type_alias { T.any(Symbol, String) }
+
+        HIGH =
+          T.let(
+            :high,
+            ModernTreasury::PaymentOrderUpdateParams::Priority::TaggedSymbol
+          )
+        NORMAL =
+          T.let(
+            :normal,
+            ModernTreasury::PaymentOrderUpdateParams::Priority::TaggedSymbol
+          )
+
+        sig do
+          override.returns(
+            T::Array[
+              ModernTreasury::PaymentOrderUpdateParams::Priority::TaggedSymbol
+            ]
+          )
+        end
+        def self.values
+        end
+      end
+
+      class ReceivingAccount < ModernTreasury::Internal::Type::BaseModel
+        OrHash =
+          T.type_alias do
+            T.any(
+              ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount,
+              ModernTreasury::Internal::AnyHash
+            )
+          end
+
+        sig do
+          returns(
+            T.nilable(
+              T::Array[
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::AccountDetail
+              ]
+            )
+          )
+        end
+        attr_reader :account_details
+
+        sig do
+          params(
+            account_details:
+              T::Array[
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::AccountDetail::OrHash
+              ]
+          ).void
+        end
+        attr_writer :account_details
+
+        # Can be `checking`, `savings` or `other`.
+        sig do
+          returns(T.nilable(ModernTreasury::ExternalAccountType::OrSymbol))
+        end
+        attr_reader :account_type
+
+        sig do
+          params(
+            account_type: ModernTreasury::ExternalAccountType::OrSymbol
+          ).void
+        end
+        attr_writer :account_type
+
+        sig do
+          returns(
+            T.nilable(
+              T::Array[
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::ContactDetail
+              ]
+            )
+          )
+        end
+        attr_reader :contact_details
+
+        sig do
+          params(
+            contact_details:
+              T::Array[
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::ContactDetail::OrHash
+              ]
+          ).void
+        end
+        attr_writer :contact_details
+
+        # Specifies a ledger account object that will be created with the external
+        # account. The resulting ledger account is linked to the external account for
+        # auto-ledgering Payment objects. See
+        # https://docs.moderntreasury.com/docs/linking-to-other-modern-treasury-objects
+        # for more details.
+        sig do
+          returns(
+            T.nilable(
+              ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::LedgerAccount
+            )
+          )
+        end
+        attr_reader :ledger_account
+
+        sig do
+          params(
+            ledger_account:
+              ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::LedgerAccount::OrHash
+          ).void
+        end
+        attr_writer :ledger_account
+
+        # Additional data represented as key-value pairs. Both the key and value must be
+        # strings.
+        sig { returns(T.nilable(T::Hash[Symbol, String])) }
+        attr_reader :metadata
+
+        sig { params(metadata: T::Hash[Symbol, String]).void }
+        attr_writer :metadata
+
+        # A nickname for the external account. This is only for internal usage and won't
+        # affect any payments
+        sig { returns(T.nilable(String)) }
+        attr_accessor :name
+
+        # Required if receiving wire payments.
+        sig do
+          returns(
+            T.nilable(
+              ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::PartyAddress
+            )
+          )
+        end
+        attr_reader :party_address
+
+        sig do
+          params(
+            party_address:
+              ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::PartyAddress::OrHash
+          ).void
+        end
+        attr_writer :party_address
+
+        sig { returns(T.nilable(String)) }
+        attr_reader :party_identifier
+
+        sig { params(party_identifier: String).void }
+        attr_writer :party_identifier
+
+        # If this value isn't provided, it will be inherited from the counterparty's name.
+        sig { returns(T.nilable(String)) }
+        attr_reader :party_name
+
+        sig { params(party_name: String).void }
+        attr_writer :party_name
+
+        # Either `individual` or `business`.
+        sig do
+          returns(
+            T.nilable(
+              ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::PartyType::OrSymbol
+            )
+          )
+        end
+        attr_accessor :party_type
+
+        # If you've enabled the Modern Treasury + Plaid integration in your Plaid account,
+        # you can pass the processor token in this field.
+        sig { returns(T.nilable(String)) }
+        attr_reader :plaid_processor_token
+
+        sig { params(plaid_processor_token: String).void }
+        attr_writer :plaid_processor_token
+
+        sig do
+          returns(
+            T.nilable(
+              T::Array[
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail
+              ]
+            )
+          )
+        end
+        attr_reader :routing_details
+
+        sig do
+          params(
+            routing_details:
+              T::Array[
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::OrHash
+              ]
+          ).void
+        end
+        attr_writer :routing_details
+
+        # Either `receiving_account` or `receiving_account_id` must be present. When using
+        # `receiving_account_id`, you may pass the id of an external account or an
+        # internal account.
+        sig do
+          params(
+            account_details:
+              T::Array[
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::AccountDetail::OrHash
+              ],
+            account_type: ModernTreasury::ExternalAccountType::OrSymbol,
+            contact_details:
+              T::Array[
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::ContactDetail::OrHash
+              ],
+            ledger_account:
+              ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::LedgerAccount::OrHash,
+            metadata: T::Hash[Symbol, String],
+            name: T.nilable(String),
+            party_address:
+              ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::PartyAddress::OrHash,
+            party_identifier: String,
+            party_name: String,
+            party_type:
+              T.nilable(
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::PartyType::OrSymbol
+              ),
+            plaid_processor_token: String,
+            routing_details:
+              T::Array[
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::OrHash
+              ]
+          ).returns(T.attached_class)
+        end
+        def self.new(
+          account_details: nil,
+          # Can be `checking`, `savings` or `other`.
+          account_type: nil,
+          contact_details: nil,
+          # Specifies a ledger account object that will be created with the external
+          # account. The resulting ledger account is linked to the external account for
+          # auto-ledgering Payment objects. See
+          # https://docs.moderntreasury.com/docs/linking-to-other-modern-treasury-objects
+          # for more details.
+          ledger_account: nil,
+          # Additional data represented as key-value pairs. Both the key and value must be
+          # strings.
+          metadata: nil,
+          # A nickname for the external account. This is only for internal usage and won't
+          # affect any payments
+          name: nil,
+          # Required if receiving wire payments.
+          party_address: nil,
+          party_identifier: nil,
+          # If this value isn't provided, it will be inherited from the counterparty's name.
+          party_name: nil,
+          # Either `individual` or `business`.
+          party_type: nil,
+          # If you've enabled the Modern Treasury + Plaid integration in your Plaid account,
+          # you can pass the processor token in this field.
+          plaid_processor_token: nil,
+          routing_details: nil
+        )
+        end
+
+        sig do
+          override.returns(
+            {
+              account_details:
+                T::Array[
+                  ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::AccountDetail
+                ],
+              account_type: ModernTreasury::ExternalAccountType::OrSymbol,
+              contact_details:
+                T::Array[
+                  ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::ContactDetail
+                ],
+              ledger_account:
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::LedgerAccount,
+              metadata: T::Hash[Symbol, String],
+              name: T.nilable(String),
+              party_address:
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::PartyAddress,
+              party_identifier: String,
+              party_name: String,
+              party_type:
+                T.nilable(
+                  ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::PartyType::OrSymbol
+                ),
+              plaid_processor_token: String,
+              routing_details:
+                T::Array[
+                  ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail
+                ]
+            }
+          )
+        end
+        def to_hash
+        end
+
+        class AccountDetail < ModernTreasury::Internal::Type::BaseModel
+          OrHash =
+            T.type_alias do
+              T.any(
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::AccountDetail,
+                ModernTreasury::Internal::AnyHash
+              )
+            end
+
+          sig { returns(String) }
+          attr_accessor :account_number
+
+          sig do
+            returns(
+              T.nilable(
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::AccountDetail::AccountNumberType::OrSymbol
+              )
+            )
+          end
+          attr_reader :account_number_type
+
+          sig do
+            params(
+              account_number_type:
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::AccountDetail::AccountNumberType::OrSymbol
+            ).void
+          end
+          attr_writer :account_number_type
+
+          sig do
+            params(
+              account_number: String,
+              account_number_type:
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::AccountDetail::AccountNumberType::OrSymbol
+            ).returns(T.attached_class)
+          end
+          def self.new(account_number:, account_number_type: nil)
+          end
+
+          sig do
+            override.returns(
+              {
+                account_number: String,
+                account_number_type:
+                  ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::AccountDetail::AccountNumberType::OrSymbol
+              }
+            )
+          end
+          def to_hash
+          end
+
+          module AccountNumberType
+            extend ModernTreasury::Internal::Type::Enum
+
+            TaggedSymbol =
+              T.type_alias do
+                T.all(
+                  Symbol,
+                  ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::AccountDetail::AccountNumberType
+                )
+              end
+            OrSymbol = T.type_alias { T.any(Symbol, String) }
+
+            AU_NUMBER =
+              T.let(
+                :au_number,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::AccountDetail::AccountNumberType::TaggedSymbol
+              )
+            CLABE =
+              T.let(
+                :clabe,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::AccountDetail::AccountNumberType::TaggedSymbol
+              )
+            HK_NUMBER =
+              T.let(
+                :hk_number,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::AccountDetail::AccountNumberType::TaggedSymbol
+              )
+            IBAN =
+              T.let(
+                :iban,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::AccountDetail::AccountNumberType::TaggedSymbol
+              )
+            ID_NUMBER =
+              T.let(
+                :id_number,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::AccountDetail::AccountNumberType::TaggedSymbol
+              )
+            NZ_NUMBER =
+              T.let(
+                :nz_number,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::AccountDetail::AccountNumberType::TaggedSymbol
+              )
+            OTHER =
+              T.let(
+                :other,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::AccountDetail::AccountNumberType::TaggedSymbol
+              )
+            PAN =
+              T.let(
+                :pan,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::AccountDetail::AccountNumberType::TaggedSymbol
+              )
+            SG_NUMBER =
+              T.let(
+                :sg_number,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::AccountDetail::AccountNumberType::TaggedSymbol
+              )
+            WALLET_ADDRESS =
+              T.let(
+                :wallet_address,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::AccountDetail::AccountNumberType::TaggedSymbol
+              )
+
+            sig do
+              override.returns(
+                T::Array[
+                  ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::AccountDetail::AccountNumberType::TaggedSymbol
+                ]
+              )
+            end
+            def self.values
+            end
+          end
+        end
+
+        class ContactDetail < ModernTreasury::Internal::Type::BaseModel
+          OrHash =
+            T.type_alias do
+              T.any(
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::ContactDetail,
+                ModernTreasury::Internal::AnyHash
+              )
+            end
+
+          sig { returns(T.nilable(String)) }
+          attr_reader :contact_identifier
+
+          sig { params(contact_identifier: String).void }
+          attr_writer :contact_identifier
+
+          sig do
+            returns(
+              T.nilable(
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::ContactDetail::ContactIdentifierType::OrSymbol
+              )
+            )
+          end
+          attr_reader :contact_identifier_type
+
+          sig do
+            params(
+              contact_identifier_type:
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::ContactDetail::ContactIdentifierType::OrSymbol
+            ).void
+          end
+          attr_writer :contact_identifier_type
+
+          sig do
+            params(
+              contact_identifier: String,
+              contact_identifier_type:
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::ContactDetail::ContactIdentifierType::OrSymbol
+            ).returns(T.attached_class)
+          end
+          def self.new(contact_identifier: nil, contact_identifier_type: nil)
+          end
+
+          sig do
+            override.returns(
+              {
+                contact_identifier: String,
+                contact_identifier_type:
+                  ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::ContactDetail::ContactIdentifierType::OrSymbol
+              }
+            )
+          end
+          def to_hash
+          end
+
+          module ContactIdentifierType
+            extend ModernTreasury::Internal::Type::Enum
+
+            TaggedSymbol =
+              T.type_alias do
+                T.all(
+                  Symbol,
+                  ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::ContactDetail::ContactIdentifierType
+                )
+              end
+            OrSymbol = T.type_alias { T.any(Symbol, String) }
+
+            EMAIL =
+              T.let(
+                :email,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::ContactDetail::ContactIdentifierType::TaggedSymbol
+              )
+            PHONE_NUMBER =
+              T.let(
+                :phone_number,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::ContactDetail::ContactIdentifierType::TaggedSymbol
+              )
+            WEBSITE =
+              T.let(
+                :website,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::ContactDetail::ContactIdentifierType::TaggedSymbol
+              )
+
+            sig do
+              override.returns(
+                T::Array[
+                  ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::ContactDetail::ContactIdentifierType::TaggedSymbol
+                ]
+              )
+            end
+            def self.values
+            end
+          end
+        end
+
+        class LedgerAccount < ModernTreasury::Internal::Type::BaseModel
+          OrHash =
+            T.type_alias do
+              T.any(
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::LedgerAccount,
+                ModernTreasury::Internal::AnyHash
+              )
+            end
+
+          # The currency of the ledger account.
+          sig { returns(String) }
+          attr_accessor :currency
+
+          # The id of the ledger that this account belongs to.
+          sig { returns(String) }
+          attr_accessor :ledger_id
+
+          # The name of the ledger account.
+          sig { returns(String) }
+          attr_accessor :name
+
+          # The normal balance of the ledger account.
+          sig { returns(ModernTreasury::TransactionDirection::OrSymbol) }
+          attr_accessor :normal_balance
+
+          # The currency exponent of the ledger account.
+          sig { returns(T.nilable(Integer)) }
+          attr_accessor :currency_exponent
+
+          # The description of the ledger account.
+          sig { returns(T.nilable(String)) }
+          attr_accessor :description
+
+          # The array of ledger account category ids that this ledger account should be a
+          # child of.
+          sig { returns(T.nilable(T::Array[String])) }
+          attr_reader :ledger_account_category_ids
+
+          sig { params(ledger_account_category_ids: T::Array[String]).void }
+          attr_writer :ledger_account_category_ids
+
+          # If the ledger account links to another object in Modern Treasury, the id will be
+          # populated here, otherwise null.
+          sig { returns(T.nilable(String)) }
+          attr_reader :ledgerable_id
+
+          sig { params(ledgerable_id: String).void }
+          attr_writer :ledgerable_id
+
+          # If the ledger account links to another object in Modern Treasury, the type will
+          # be populated here, otherwise null. The value is one of internal_account or
+          # external_account.
+          sig do
+            returns(
+              T.nilable(
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::LedgerAccount::LedgerableType::OrSymbol
+              )
+            )
+          end
+          attr_reader :ledgerable_type
+
+          sig do
+            params(
+              ledgerable_type:
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::LedgerAccount::LedgerableType::OrSymbol
+            ).void
+          end
+          attr_writer :ledgerable_type
+
+          # Additional data represented as key-value pairs. Both the key and value must be
+          # strings.
+          sig { returns(T.nilable(T::Hash[Symbol, String])) }
+          attr_reader :metadata
+
+          sig { params(metadata: T::Hash[Symbol, String]).void }
+          attr_writer :metadata
+
+          # Specifies a ledger account object that will be created with the external
+          # account. The resulting ledger account is linked to the external account for
+          # auto-ledgering Payment objects. See
+          # https://docs.moderntreasury.com/docs/linking-to-other-modern-treasury-objects
+          # for more details.
+          sig do
+            params(
+              currency: String,
+              ledger_id: String,
+              name: String,
+              normal_balance: ModernTreasury::TransactionDirection::OrSymbol,
+              currency_exponent: T.nilable(Integer),
+              description: T.nilable(String),
+              ledger_account_category_ids: T::Array[String],
+              ledgerable_id: String,
+              ledgerable_type:
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::LedgerAccount::LedgerableType::OrSymbol,
+              metadata: T::Hash[Symbol, String]
+            ).returns(T.attached_class)
+          end
+          def self.new(
+            # The currency of the ledger account.
+            currency:,
+            # The id of the ledger that this account belongs to.
+            ledger_id:,
+            # The name of the ledger account.
+            name:,
+            # The normal balance of the ledger account.
+            normal_balance:,
+            # The currency exponent of the ledger account.
+            currency_exponent: nil,
+            # The description of the ledger account.
+            description: nil,
+            # The array of ledger account category ids that this ledger account should be a
+            # child of.
+            ledger_account_category_ids: nil,
+            # If the ledger account links to another object in Modern Treasury, the id will be
+            # populated here, otherwise null.
+            ledgerable_id: nil,
+            # If the ledger account links to another object in Modern Treasury, the type will
+            # be populated here, otherwise null. The value is one of internal_account or
+            # external_account.
+            ledgerable_type: nil,
+            # Additional data represented as key-value pairs. Both the key and value must be
+            # strings.
+            metadata: nil
+          )
+          end
+
+          sig do
+            override.returns(
+              {
+                currency: String,
+                ledger_id: String,
+                name: String,
+                normal_balance: ModernTreasury::TransactionDirection::OrSymbol,
+                currency_exponent: T.nilable(Integer),
+                description: T.nilable(String),
+                ledger_account_category_ids: T::Array[String],
+                ledgerable_id: String,
+                ledgerable_type:
+                  ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::LedgerAccount::LedgerableType::OrSymbol,
+                metadata: T::Hash[Symbol, String]
+              }
+            )
+          end
+          def to_hash
+          end
+
+          # If the ledger account links to another object in Modern Treasury, the type will
+          # be populated here, otherwise null. The value is one of internal_account or
+          # external_account.
+          module LedgerableType
+            extend ModernTreasury::Internal::Type::Enum
+
+            TaggedSymbol =
+              T.type_alias do
+                T.all(
+                  Symbol,
+                  ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::LedgerAccount::LedgerableType
+                )
+              end
+            OrSymbol = T.type_alias { T.any(Symbol, String) }
+
+            COUNTERPARTY =
+              T.let(
+                :counterparty,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::LedgerAccount::LedgerableType::TaggedSymbol
+              )
+            EXTERNAL_ACCOUNT =
+              T.let(
+                :external_account,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::LedgerAccount::LedgerableType::TaggedSymbol
+              )
+            INTERNAL_ACCOUNT =
+              T.let(
+                :internal_account,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::LedgerAccount::LedgerableType::TaggedSymbol
+              )
+            VIRTUAL_ACCOUNT =
+              T.let(
+                :virtual_account,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::LedgerAccount::LedgerableType::TaggedSymbol
+              )
+
+            sig do
+              override.returns(
+                T::Array[
+                  ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::LedgerAccount::LedgerableType::TaggedSymbol
+                ]
+              )
+            end
+            def self.values
+            end
+          end
+        end
+
+        class PartyAddress < ModernTreasury::Internal::Type::BaseModel
+          OrHash =
+            T.type_alias do
+              T.any(
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::PartyAddress,
+                ModernTreasury::Internal::AnyHash
+              )
+            end
+
+          # Country code conforms to [ISO 3166-1 alpha-2]
+          sig { returns(T.nilable(String)) }
+          attr_accessor :country
+
+          sig { returns(T.nilable(String)) }
+          attr_accessor :line1
+
+          sig { returns(T.nilable(String)) }
+          attr_accessor :line2
+
+          # Locality or City.
+          sig { returns(T.nilable(String)) }
+          attr_accessor :locality
+
+          # The postal code of the address.
+          sig { returns(T.nilable(String)) }
+          attr_accessor :postal_code
+
+          # Region or State.
+          sig { returns(T.nilable(String)) }
+          attr_accessor :region
+
+          # Required if receiving wire payments.
+          sig do
+            params(
+              country: T.nilable(String),
+              line1: T.nilable(String),
+              line2: T.nilable(String),
+              locality: T.nilable(String),
+              postal_code: T.nilable(String),
+              region: T.nilable(String)
+            ).returns(T.attached_class)
+          end
+          def self.new(
+            # Country code conforms to [ISO 3166-1 alpha-2]
+            country: nil,
+            line1: nil,
+            line2: nil,
+            # Locality or City.
+            locality: nil,
+            # The postal code of the address.
+            postal_code: nil,
+            # Region or State.
+            region: nil
+          )
+          end
+
+          sig do
+            override.returns(
+              {
+                country: T.nilable(String),
+                line1: T.nilable(String),
+                line2: T.nilable(String),
+                locality: T.nilable(String),
+                postal_code: T.nilable(String),
+                region: T.nilable(String)
+              }
+            )
+          end
+          def to_hash
+          end
+        end
+
+        # Either `individual` or `business`.
+        module PartyType
+          extend ModernTreasury::Internal::Type::Enum
+
+          TaggedSymbol =
+            T.type_alias do
+              T.all(
+                Symbol,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::PartyType
+              )
+            end
+          OrSymbol = T.type_alias { T.any(Symbol, String) }
+
+          BUSINESS =
+            T.let(
+              :business,
+              ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::PartyType::TaggedSymbol
+            )
+          INDIVIDUAL =
+            T.let(
+              :individual,
+              ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::PartyType::TaggedSymbol
+            )
+
+          sig do
+            override.returns(
+              T::Array[
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::PartyType::TaggedSymbol
+              ]
+            )
+          end
+          def self.values
+          end
+        end
+
+        class RoutingDetail < ModernTreasury::Internal::Type::BaseModel
+          OrHash =
+            T.type_alias do
+              T.any(
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail,
+                ModernTreasury::Internal::AnyHash
+              )
+            end
+
+          sig { returns(String) }
+          attr_accessor :routing_number
+
+          sig do
+            returns(
+              ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::OrSymbol
+            )
+          end
+          attr_accessor :routing_number_type
+
+          sig do
+            returns(
+              T.nilable(
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::OrSymbol
+              )
+            )
+          end
+          attr_reader :payment_type
+
+          sig do
+            params(
+              payment_type:
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::OrSymbol
+            ).void
+          end
+          attr_writer :payment_type
+
+          sig do
+            params(
+              routing_number: String,
+              routing_number_type:
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::OrSymbol,
+              payment_type:
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::OrSymbol
+            ).returns(T.attached_class)
+          end
+          def self.new(routing_number:, routing_number_type:, payment_type: nil)
+          end
+
+          sig do
+            override.returns(
+              {
+                routing_number: String,
+                routing_number_type:
+                  ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::OrSymbol,
+                payment_type:
+                  ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::OrSymbol
+              }
+            )
+          end
+          def to_hash
+          end
+
+          module RoutingNumberType
+            extend ModernTreasury::Internal::Type::Enum
+
+            TaggedSymbol =
+              T.type_alias do
+                T.all(
+                  Symbol,
+                  ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType
+                )
+              end
+            OrSymbol = T.type_alias { T.any(Symbol, String) }
+
+            ABA =
+              T.let(
+                :aba,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::TaggedSymbol
+              )
+            AU_BSB =
+              T.let(
+                :au_bsb,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::TaggedSymbol
+              )
+            BR_CODIGO =
+              T.let(
+                :br_codigo,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::TaggedSymbol
+              )
+            CA_CPA =
+              T.let(
+                :ca_cpa,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::TaggedSymbol
+              )
+            CHIPS =
+              T.let(
+                :chips,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::TaggedSymbol
+              )
+            CNAPS =
+              T.let(
+                :cnaps,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::TaggedSymbol
+              )
+            DK_INTERBANK_CLEARING_CODE =
+              T.let(
+                :dk_interbank_clearing_code,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::TaggedSymbol
+              )
+            GB_SORT_CODE =
+              T.let(
+                :gb_sort_code,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::TaggedSymbol
+              )
+            HK_INTERBANK_CLEARING_CODE =
+              T.let(
+                :hk_interbank_clearing_code,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::TaggedSymbol
+              )
+            HU_INTERBANK_CLEARING_CODE =
+              T.let(
+                :hu_interbank_clearing_code,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::TaggedSymbol
+              )
+            ID_SKNBI_CODE =
+              T.let(
+                :id_sknbi_code,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::TaggedSymbol
+              )
+            IN_IFSC =
+              T.let(
+                :in_ifsc,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::TaggedSymbol
+              )
+            JP_ZENGIN_CODE =
+              T.let(
+                :jp_zengin_code,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::TaggedSymbol
+              )
+            MY_BRANCH_CODE =
+              T.let(
+                :my_branch_code,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::TaggedSymbol
+              )
+            MX_BANK_IDENTIFIER =
+              T.let(
+                :mx_bank_identifier,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::TaggedSymbol
+              )
+            NZ_NATIONAL_CLEARING_CODE =
+              T.let(
+                :nz_national_clearing_code,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::TaggedSymbol
+              )
+            PL_NATIONAL_CLEARING_CODE =
+              T.let(
+                :pl_national_clearing_code,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::TaggedSymbol
+              )
+            SE_BANKGIRO_CLEARING_CODE =
+              T.let(
+                :se_bankgiro_clearing_code,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::TaggedSymbol
+              )
+            SG_INTERBANK_CLEARING_CODE =
+              T.let(
+                :sg_interbank_clearing_code,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::TaggedSymbol
+              )
+            SWIFT =
+              T.let(
+                :swift,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::TaggedSymbol
+              )
+            ZA_NATIONAL_CLEARING_CODE =
+              T.let(
+                :za_national_clearing_code,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::TaggedSymbol
+              )
+
+            sig do
+              override.returns(
+                T::Array[
+                  ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::RoutingNumberType::TaggedSymbol
+                ]
+              )
+            end
+            def self.values
+            end
+          end
+
+          module PaymentType
+            extend ModernTreasury::Internal::Type::Enum
+
+            TaggedSymbol =
+              T.type_alias do
+                T.all(
+                  Symbol,
+                  ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType
+                )
+              end
+            OrSymbol = T.type_alias { T.any(Symbol, String) }
+
+            ACH =
+              T.let(
+                :ach,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            AU_BECS =
+              T.let(
+                :au_becs,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            BACS =
+              T.let(
+                :bacs,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            BOOK =
+              T.let(
+                :book,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            CARD =
+              T.let(
+                :card,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            CHATS =
+              T.let(
+                :chats,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            CHECK =
+              T.let(
+                :check,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            CROSS_BORDER =
+              T.let(
+                :cross_border,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            DK_NETS =
+              T.let(
+                :dk_nets,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            EFT =
+              T.let(
+                :eft,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            HU_ICS =
+              T.let(
+                :hu_ics,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            INTERAC =
+              T.let(
+                :interac,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            MASAV =
+              T.let(
+                :masav,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            MX_CCEN =
+              T.let(
+                :mx_ccen,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            NEFT =
+              T.let(
+                :neft,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            NICS =
+              T.let(
+                :nics,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            NZ_BECS =
+              T.let(
+                :nz_becs,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            PL_ELIXIR =
+              T.let(
+                :pl_elixir,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            PROVXCHANGE =
+              T.let(
+                :provxchange,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            RO_SENT =
+              T.let(
+                :ro_sent,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            RTP =
+              T.let(
+                :rtp,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            SE_BANKGIROT =
+              T.let(
+                :se_bankgirot,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            SEN =
+              T.let(
+                :sen,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            SEPA =
+              T.let(
+                :sepa,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            SG_GIRO =
+              T.let(
+                :sg_giro,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            SIC =
+              T.let(
+                :sic,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            SIGNET =
+              T.let(
+                :signet,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            SKNBI =
+              T.let(
+                :sknbi,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            WIRE =
+              T.let(
+                :wire,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+            ZENGIN =
+              T.let(
+                :zengin,
+                ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+              )
+
+            sig do
+              override.returns(
+                T::Array[
+                  ModernTreasury::PaymentOrderUpdateParams::ReceivingAccount::RoutingDetail::PaymentType::TaggedSymbol
+                ]
+              )
+            end
+            def self.values
+            end
+          end
+        end
+      end
+
+      # To cancel a payment order, use `cancelled`. To redraft a returned payment order,
+      # use `approved`. To undo approval on a denied or approved payment order, use
+      # `needs_approval`.
+      module Status
+        extend ModernTreasury::Internal::Type::Enum
+
+        TaggedSymbol =
+          T.type_alias do
+            T.all(Symbol, ModernTreasury::PaymentOrderUpdateParams::Status)
+          end
+        OrSymbol = T.type_alias { T.any(Symbol, String) }
+
+        APPROVED =
+          T.let(
+            :approved,
+            ModernTreasury::PaymentOrderUpdateParams::Status::TaggedSymbol
+          )
+        CANCELLED =
+          T.let(
+            :cancelled,
+            ModernTreasury::PaymentOrderUpdateParams::Status::TaggedSymbol
+          )
+        COMPLETED =
+          T.let(
+            :completed,
+            ModernTreasury::PaymentOrderUpdateParams::Status::TaggedSymbol
+          )
+        DENIED =
+          T.let(
+            :denied,
+            ModernTreasury::PaymentOrderUpdateParams::Status::TaggedSymbol
+          )
+        FAILED =
+          T.let(
+            :failed,
+            ModernTreasury::PaymentOrderUpdateParams::Status::TaggedSymbol
+          )
+        NEEDS_APPROVAL =
+          T.let(
+            :needs_approval,
+            ModernTreasury::PaymentOrderUpdateParams::Status::TaggedSymbol
+          )
+        PENDING =
+          T.let(
+            :pending,
+            ModernTreasury::PaymentOrderUpdateParams::Status::TaggedSymbol
+          )
+        PROCESSING =
+          T.let(
+            :processing,
+            ModernTreasury::PaymentOrderUpdateParams::Status::TaggedSymbol
+          )
+        RETURNED =
+          T.let(
+            :returned,
+            ModernTreasury::PaymentOrderUpdateParams::Status::TaggedSymbol
+          )
+        REVERSED =
+          T.let(
+            :reversed,
+            ModernTreasury::PaymentOrderUpdateParams::Status::TaggedSymbol
+          )
+        SENT =
+          T.let(
+            :sent,
+            ModernTreasury::PaymentOrderUpdateParams::Status::TaggedSymbol
+          )
+
+        sig do
+          override.returns(
+            T::Array[
+              ModernTreasury::PaymentOrderUpdateParams::Status::TaggedSymbol
+            ]
+          )
+        end
+        def self.values
+        end
+      end
+    end
+  end
+end