modern_treasury 0.1.0.pre.alpha.16 → 0.1.0.pre.alpha.17

data/lib/modern_treasury/models/payment_order.rb

@@ -2,7 +2,8 @@
 
 module ModernTreasury
   module Models
-    class PaymentOrder < ModernTreasury::BaseModel
+    # @see ModernTreasury::Resources::PaymentOrders#create
+    class PaymentOrder < ModernTreasury::Internal::Type::BaseModel
       # @!attribute id
       #
       #   @return [String]
@@ -15,43 +16,45 @@ module ModernTreasury
 
       # @!attribute accounting_category_id
       #   The ID of one of your accounting categories. Note that these will only be
-      #     accessible if your accounting system has been connected.
+      #   accessible if your accounting system has been connected.
       #
       #   @return [String, nil]
       required :accounting_category_id, String, nil?: true
 
       # @!attribute accounting_ledger_class_id
       #   The ID of one of your accounting ledger classes. Note that these will only be
-      #     accessible if your accounting system has been connected.
+      #   accessible if your accounting system has been connected.
       #
       #   @return [String, nil]
       required :accounting_ledger_class_id, String, nil?: true
 
       # @!attribute amount
       #   Value in specified currency's smallest unit. e.g. $10 would be represented as
-      #     1000 (cents). For RTP, the maximum amount allowed by the network is $100,000.
+      #   1000 (cents). For RTP, the maximum amount allowed by the network is $100,000.
       #
       #   @return [Integer]
       required :amount, Integer
 
       # @!attribute charge_bearer
       #   The party that will pay the fees for the payment order. Only applies to wire
-      #     payment orders. Can be one of shared, sender, or receiver, which correspond
-      #     respectively with the SWIFT 71A values `SHA`, `OUR`, `BEN`.
+      #   payment orders. Can be one of shared, sender, or receiver, which correspond
+      #   respectively with the SWIFT 71A values `SHA`, `OUR`, `BEN`.
       #
       #   @return [Symbol, ModernTreasury::Models::PaymentOrder::ChargeBearer, nil]
       required :charge_bearer, enum: -> { ModernTreasury::Models::PaymentOrder::ChargeBearer }, nil?: true
 
       # @!attribute compliance_rule_metadata
       #   Custom key-value pair for usage in compliance rules. Please contact support
-      #     before making changes to this field.
+      #   before making changes to this field.
       #
       #   @return [Hash{Symbol=>Object}, nil]
-      required :compliance_rule_metadata, ModernTreasury::HashOf[ModernTreasury::Unknown], nil?: true
+      required :compliance_rule_metadata,
+               ModernTreasury::Internal::Type::HashOf[ModernTreasury::Internal::Type::Unknown],
+               nil?: true
 
       # @!attribute counterparty_id
       #   If the payment order is tied to a specific Counterparty, their id will appear,
-      #     otherwise `null`.
+      #   otherwise `null`.
       #
       #   @return [String, nil]
       required :counterparty_id, String, nil?: true
@@ -69,14 +72,14 @@ module ModernTreasury
 
       # @!attribute current_return
       #   If the payment order's status is `returned`, this will include the return
-      #     object's data.
+      #   object's data.
       #
       #   @return [ModernTreasury::Models::ReturnObject, nil]
       required :current_return, -> { ModernTreasury::Models::ReturnObject }, nil?: true
 
       # @!attribute decision_id
       #   The ID of the compliance decision for the payment order, if transaction
-      #     monitoring is enabled.
+      #   monitoring is enabled.
       #
       #   @return [String, nil]
       required :decision_id, String, nil?: true
@@ -89,17 +92,17 @@ module ModernTreasury
 
       # @!attribute direction
       #   One of `credit`, `debit`. Describes the direction money is flowing in the
-      #     transaction. A `credit` moves money from your account to someone else's. A
-      #     `debit` pulls money from someone else's account to your own. Note that wire,
-      #     rtp, and check payments will always be `credit`.
+      #   transaction. A `credit` moves money from your account to someone else's. A
+      #   `debit` pulls money from someone else's account to your own. Note that wire,
+      #   rtp, and check payments will always be `credit`.
       #
       #   @return [Symbol, ModernTreasury::Models::PaymentOrder::Direction]
       required :direction, enum: -> { ModernTreasury::Models::PaymentOrder::Direction }
 
       # @!attribute effective_date
       #   Date transactions are to be posted to the participants' account. Defaults to the
-      #     current business day or the next business day if the current day is a bank
-      #     holiday or weekend. Format: yyyy-mm-dd.
+      #   current business day or the next business day if the current day is a bank
+      #   holiday or weekend. Format: yyyy-mm-dd.
       #
       #   @return [Date]
       required :effective_date, Date
@@ -112,15 +115,15 @@ module ModernTreasury
 
       # @!attribute foreign_exchange_contract
       #   If present, indicates a specific foreign exchange contract number that has been
-      #     generated by your financial institution.
+      #   generated by your financial institution.
       #
       #   @return [String, nil]
       required :foreign_exchange_contract, String, nil?: true
 
       # @!attribute foreign_exchange_indicator
       #   Indicates the type of FX transfer to initiate, can be either
-      #     `variable_to_fixed`, `fixed_to_variable`, or `null` if the payment order
-      #     currency matches the originating account currency.
+      #   `variable_to_fixed`, `fixed_to_variable`, or `null` if the payment order
+      #   currency matches the originating account currency.
       #
       #   @return [Symbol, ModernTreasury::Models::PaymentOrder::ForeignExchangeIndicator, nil]
       required :foreign_exchange_indicator,
@@ -143,24 +146,24 @@ module ModernTreasury
 
       # @!attribute live_mode
       #   This field will be true if this object exists in the live environment or false
-      #     if it exists in the test environment.
+      #   if it exists in the test environment.
       #
       #   @return [Boolean]
-      required :live_mode, ModernTreasury::BooleanModel
+      required :live_mode, ModernTreasury::Internal::Type::Boolean
 
       # @!attribute metadata
       #   Additional data represented as key-value pairs. Both the key and value must be
-      #     strings.
+      #   strings.
       #
       #   @return [Hash{Symbol=>String}]
-      required :metadata, ModernTreasury::HashOf[String]
+      required :metadata, ModernTreasury::Internal::Type::HashOf[String]
 
       # @!attribute nsf_protected
       #   A boolean to determine if NSF Protection is enabled for this payment order. Note
-      #     that this setting must also be turned on in your organization settings page.
+      #   that this setting must also be turned on in your organization settings page.
       #
       #   @return [Boolean]
-      required :nsf_protected, ModernTreasury::BooleanModel
+      required :nsf_protected, ModernTreasury::Internal::Type::Boolean
 
       # @!attribute object
       #
@@ -175,35 +178,35 @@ module ModernTreasury
 
       # @!attribute originating_party_name
       #   If present, this will replace your default company name on receiver's bank
-      #     statement. This field can only be used for ACH payments currently. For ACH, only
-      #     the first 16 characters of this string will be used. Any additional characters
-      #     will be truncated.
+      #   statement. This field can only be used for ACH payments currently. For ACH, only
+      #   the first 16 characters of this string will be used. Any additional characters
+      #   will be truncated.
       #
       #   @return [String, nil]
       required :originating_party_name, String, nil?: true
 
       # @!attribute priority
       #   Either `normal` or `high`. For ACH and EFT payments, `high` represents a
-      #     same-day ACH or EFT transfer, respectively. For check payments, `high` can mean
-      #     an overnight check rather than standard mail.
+      #   same-day ACH or EFT transfer, respectively. For check payments, `high` can mean
+      #   an overnight check rather than standard mail.
       #
       #   @return [Symbol, ModernTreasury::Models::PaymentOrder::Priority]
       required :priority, enum: -> { ModernTreasury::Models::PaymentOrder::Priority }
 
       # @!attribute process_after
       #   If present, Modern Treasury will not process the payment until after this time.
-      #     If `process_after` is past the cutoff for `effective_date`, `process_after` will
-      #     take precedence and `effective_date` will automatically update to reflect the
-      #     earliest possible sending date after `process_after`. Format is ISO8601
-      #     timestamp.
+      #   If `process_after` is past the cutoff for `effective_date`, `process_after` will
+      #   take precedence and `effective_date` will automatically update to reflect the
+      #   earliest possible sending date after `process_after`. Format is ISO8601
+      #   timestamp.
       #
       #   @return [Time, nil]
       required :process_after, Time, nil?: true
 
       # @!attribute purpose
       #   For `wire`, this is usually the purpose which is transmitted via the
-      #     "InstrForDbtrAgt" field in the ISO20022 file. For `eft`, this field is the 3
-      #     digit CPA Code that will be attached to the payment.
+      #   "InstrForDbtrAgt" field in the ISO20022 file. For `eft`, this field is the 3
+      #   digit CPA Code that will be attached to the payment.
       #
       #   @return [String, nil]
       required :purpose, String, nil?: true
@@ -223,30 +226,30 @@ module ModernTreasury
       #
       #   @return [Array<ModernTreasury::Models::PaymentOrder::ReferenceNumber>]
       required :reference_numbers,
-               -> { ModernTreasury::ArrayOf[ModernTreasury::Models::PaymentOrder::ReferenceNumber] }
+               -> { ModernTreasury::Internal::Type::ArrayOf[ModernTreasury::Models::PaymentOrder::ReferenceNumber] }
 
       # @!attribute remittance_information
       #   For `ach`, this field will be passed through on an addenda record. For `wire`
-      #     payments the field will be passed through as the "Originator to Beneficiary
-      #     Information", also known as OBI or Fedwire tag 6000.
+      #   payments the field will be passed through as the "Originator to Beneficiary
+      #   Information", also known as OBI or Fedwire tag 6000.
       #
       #   @return [String, nil]
       required :remittance_information, String, nil?: true
 
       # @!attribute send_remittance_advice
       #   Send an email to the counterparty when the payment order is sent to the bank. If
-      #     `null`, `send_remittance_advice` on the Counterparty is used.
+      #   `null`, `send_remittance_advice` on the Counterparty is used.
       #
       #   @return [Boolean, nil]
-      required :send_remittance_advice, ModernTreasury::BooleanModel, nil?: true
+      required :send_remittance_advice, ModernTreasury::Internal::Type::Boolean, nil?: true
 
       # @!attribute statement_descriptor
       #   An optional descriptor which will appear in the receiver's statement. For
-      #     `check` payments this field will be used as the memo line. For `ach` the maximum
-      #     length is 10 characters. Note that for ACH payments, the name on your bank
-      #     account will be included automatically by the bank, so you can use the
-      #     characters for other useful information. For `eft` the maximum length is 15
-      #     characters.
+      #   `check` payments this field will be used as the memo line. For `ach` the maximum
+      #   length is 10 characters. Note that for ACH payments, the name on your bank
+      #   account will be included automatically by the bank, so you can use the
+      #   characters for other useful information. For `eft` the maximum length is 15
+      #   characters.
       #
       #   @return [String, nil]
       required :statement_descriptor, String, nil?: true
@@ -259,40 +262,40 @@ module ModernTreasury
 
       # @!attribute subtype
       #   An additional layer of classification for the type of payment order you are
-      #     doing. This field is only used for `ach` payment orders currently. For `ach`
-      #     payment orders, the `subtype` represents the SEC code. We currently support
-      #     `CCD`, `PPD`, `IAT`, `CTX`, `WEB`, `CIE`, and `TEL`.
+      #   doing. This field is only used for `ach` payment orders currently. For `ach`
+      #   payment orders, the `subtype` represents the SEC code. We currently support
+      #   `CCD`, `PPD`, `IAT`, `CTX`, `WEB`, `CIE`, and `TEL`.
       #
       #   @return [Symbol, ModernTreasury::Models::PaymentOrderSubtype, nil]
       required :subtype, enum: -> { ModernTreasury::Models::PaymentOrderSubtype }, nil?: true
 
       # @!attribute transaction_ids
       #   The IDs of all the transactions associated to this payment order. Usually, you
-      #     will only have a single transaction ID. However, if a payment order initially
-      #     results in a Return, but gets redrafted and is later successfully completed, it
-      #     can have many transactions.
+      #   will only have a single transaction ID. However, if a payment order initially
+      #   results in a Return, but gets redrafted and is later successfully completed, it
+      #   can have many transactions.
       #
       #   @return [Array<String>]
-      required :transaction_ids, ModernTreasury::ArrayOf[String]
+      required :transaction_ids, ModernTreasury::Internal::Type::ArrayOf[String]
 
       # @!attribute transaction_monitoring_enabled
       #   A flag that determines whether a payment order should go through transaction
-      #     monitoring.
+      #   monitoring.
       #
       #   @return [Boolean]
-      required :transaction_monitoring_enabled, ModernTreasury::BooleanModel
+      required :transaction_monitoring_enabled, ModernTreasury::Internal::Type::Boolean
 
       # @!attribute type
       #   One of `ach`, `se_bankgirot`, `eft`, `wire`, `check`, `sen`, `book`, `rtp`,
-      #     `sepa`, `bacs`, `au_becs`, `interac`, `neft`, `nics`,
-      #     `nz_national_clearing_code`, `sic`, `signet`, `provexchange`, `zengin`.
+      #   `sepa`, `bacs`, `au_becs`, `interac`, `neft`, `nics`,
+      #   `nz_national_clearing_code`, `sic`, `signet`, `provexchange`, `zengin`.
       #
       #   @return [Symbol, ModernTreasury::Models::PaymentOrderType]
       required :type, enum: -> { ModernTreasury::Models::PaymentOrderType }
 
       # @!attribute ultimate_originating_account
       #   The account to which the originating of this payment should be attributed to.
-      #     Can be a `virtual_account` or `internal_account`.
+      #   Can be a `virtual_account` or `internal_account`.
       #
       #   @return [ModernTreasury::Models::VirtualAccount, ModernTreasury::Models::InternalAccount, nil]
       required :ultimate_originating_account,
@@ -301,7 +304,7 @@ module ModernTreasury
 
       # @!attribute ultimate_originating_account_id
       #   The ultimate originating account ID. Can be a `virtual_account` or
-      #     `internal_account`.
+      #   `internal_account`.
       #
       #   @return [String, nil]
       required :ultimate_originating_account_id, String, nil?: true
@@ -342,14 +345,14 @@ module ModernTreasury
 
       # @!attribute vendor_attributes
       #   Additional vendor specific fields for this payment. Data must be represented as
-      #     key-value pairs.
+      #   key-value pairs.
       #
       #   @return [Object, nil]
-      required :vendor_attributes, ModernTreasury::Unknown, nil?: true
+      required :vendor_attributes, ModernTreasury::Internal::Type::Unknown, nil?: true
 
       # @!attribute vendor_failure_reason
       #   This field will be populated if a vendor failure occurs. Logic shouldn't be
-      #     built on its value as it is free-form.
+      #   built on its value as it is free-form.
       #
       #   @return [String, nil]
       required :vendor_failure_reason, String, nil?: true
@@ -462,20 +465,21 @@ module ModernTreasury
       #     super
       #   end
 
-      # def initialize: (Hash | ModernTreasury::BaseModel) -> void
+      # def initialize: (Hash | ModernTreasury::Internal::Type::BaseModel) -> void
 
-      class Accounting < ModernTreasury::BaseModel
+      # @see ModernTreasury::Models::PaymentOrder#accounting
+      class Accounting < ModernTreasury::Internal::Type::BaseModel
         # @!attribute account_id
         #   The ID of one of your accounting categories. Note that these will only be
-        #     accessible if your accounting system has been connected.
+        #   accessible if your accounting system has been connected.
         #
         #   @return [String, nil]
         optional :account_id, String, nil?: true
 
         # @!attribute class_id
         #   The ID of one of the class objects in your accounting system. Class objects
-        #     track segments of your business independent of client or project. Note that
-        #     these will only be accessible if your accounting system has been connected.
+        #   track segments of your business independent of client or project. Note that
+        #   these will only be accessible if your accounting system has been connected.
         #
         #   @return [String, nil]
         optional :class_id, String, nil?: true
@@ -486,14 +490,16 @@ module ModernTreasury
         #   #
         #   def initialize(account_id: nil, class_id: nil, **) = super
 
-        # def initialize: (Hash | ModernTreasury::BaseModel) -> void
+        # def initialize: (Hash | ModernTreasury::Internal::Type::BaseModel) -> void
       end
 
       # The party that will pay the fees for the payment order. Only applies to wire
-      #   payment orders. Can be one of shared, sender, or receiver, which correspond
-      #   respectively with the SWIFT 71A values `SHA`, `OUR`, `BEN`.
+      # payment orders. Can be one of shared, sender, or receiver, which correspond
+      # respectively with the SWIFT 71A values `SHA`, `OUR`, `BEN`.
+      #
+      # @see ModernTreasury::Models::PaymentOrder#charge_bearer
       module ChargeBearer
-        extend ModernTreasury::Enum
+        extend ModernTreasury::Internal::Type::Enum
 
         SHARED = :shared
         SENDER = :sender
@@ -507,11 +513,13 @@ module ModernTreasury
       end
 
       # One of `credit`, `debit`. Describes the direction money is flowing in the
-      #   transaction. A `credit` moves money from your account to someone else's. A
-      #   `debit` pulls money from someone else's account to your own. Note that wire,
-      #   rtp, and check payments will always be `credit`.
+      # transaction. A `credit` moves money from your account to someone else's. A
+      # `debit` pulls money from someone else's account to your own. Note that wire,
+      # rtp, and check payments will always be `credit`.
+      #
+      # @see ModernTreasury::Models::PaymentOrder#direction
       module Direction
-        extend ModernTreasury::Enum
+        extend ModernTreasury::Internal::Type::Enum
 
         CREDIT = :credit
         DEBIT = :debit
@@ -524,10 +532,12 @@ module ModernTreasury
       end
 
       # Indicates the type of FX transfer to initiate, can be either
-      #   `variable_to_fixed`, `fixed_to_variable`, or `null` if the payment order
-      #   currency matches the originating account currency.
+      # `variable_to_fixed`, `fixed_to_variable`, or `null` if the payment order
+      # currency matches the originating account currency.
+      #
+      # @see ModernTreasury::Models::PaymentOrder#foreign_exchange_indicator
       module ForeignExchangeIndicator
-        extend ModernTreasury::Enum
+        extend ModernTreasury::Internal::Type::Enum
 
         FIXED_TO_VARIABLE = :fixed_to_variable
         VARIABLE_TO_FIXED = :variable_to_fixed
@@ -539,10 +549,11 @@ module ModernTreasury
         #   def self.values; end
       end
 
-      class ForeignExchangeRate < ModernTreasury::BaseModel
+      # @see ModernTreasury::Models::PaymentOrder#foreign_exchange_rate
+      class ForeignExchangeRate < ModernTreasury::Internal::Type::BaseModel
         # @!attribute base_amount
         #   Amount in the lowest denomination of the `base_currency` to convert, often
-        #     called the "sell" amount.
+        #   called the "sell" amount.
         #
         #   @return [Integer]
         required :base_amount, Integer
@@ -555,7 +566,7 @@ module ModernTreasury
 
         # @!attribute exponent
         #   The exponent component of the rate. The decimal is calculated as `value` / (10 ^
-        #     `exponent`).
+        #   `exponent`).
         #
         #   @return [Integer]
         required :exponent, Integer
@@ -568,7 +579,7 @@ module ModernTreasury
 
         # @!attribute target_amount
         #   Amount in the lowest denomination of the `target_currency`, often called the
-        #     "buy" amount.
+        #   "buy" amount.
         #
         #   @return [Integer]
         required :target_amount, Integer
@@ -581,7 +592,7 @@ module ModernTreasury
 
         # @!attribute value
         #   The whole number component of the rate. The decimal is calculated as `value` /
-        #     (10 ^ `exponent`).
+        #   (10 ^ `exponent`).
         #
         #   @return [Integer]
         required :value, Integer
@@ -599,14 +610,16 @@ module ModernTreasury
         #   #
         #   def initialize(base_amount:, base_currency:, exponent:, rate_string:, target_amount:, target_currency:, value:, **) = super
 
-        # def initialize: (Hash | ModernTreasury::BaseModel) -> void
+        # def initialize: (Hash | ModernTreasury::Internal::Type::BaseModel) -> void
       end
 
       # Either `normal` or `high`. For ACH and EFT payments, `high` represents a
-      #   same-day ACH or EFT transfer, respectively. For check payments, `high` can mean
-      #   an overnight check rather than standard mail.
+      # same-day ACH or EFT transfer, respectively. For check payments, `high` can mean
+      # an overnight check rather than standard mail.
+      #
+      # @see ModernTreasury::Models::PaymentOrder#priority
       module Priority
-        extend ModernTreasury::Enum
+        extend ModernTreasury::Internal::Type::Enum
 
         HIGH = :high
         NORMAL = :normal
@@ -618,8 +631,9 @@ module ModernTreasury
         #   def self.values; end
       end
 
+      # @see ModernTreasury::Models::PaymentOrder#receiving_account_type
       module ReceivingAccountType
-        extend ModernTreasury::Enum
+        extend ModernTreasury::Internal::Type::Enum
 
         INTERNAL_ACCOUNT = :internal_account
         EXTERNAL_ACCOUNT = :external_account
@@ -631,7 +645,7 @@ module ModernTreasury
         #   def self.values; end
       end
 
-      class ReferenceNumber < ModernTreasury::BaseModel
+      class ReferenceNumber < ModernTreasury::Internal::Type::BaseModel
         # @!attribute id
         #
         #   @return [String]
@@ -644,10 +658,10 @@ module ModernTreasury
 
         # @!attribute live_mode
         #   This field will be true if this object exists in the live environment or false
-        #     if it exists in the test environment.
+        #   if it exists in the test environment.
         #
         #   @return [Boolean]
-        required :live_mode, ModernTreasury::BooleanModel
+        required :live_mode, ModernTreasury::Internal::Type::Boolean
 
         # @!attribute object
         #
@@ -683,11 +697,13 @@ module ModernTreasury
         #   #
         #   def initialize(id:, created_at:, live_mode:, object:, reference_number:, reference_number_type:, updated_at:, **) = super
 
-        # def initialize: (Hash | ModernTreasury::BaseModel) -> void
+        # def initialize: (Hash | ModernTreasury::Internal::Type::BaseModel) -> void
 
         # The type of the reference number. Referring to the vendor payment id.
+        #
+        # @see ModernTreasury::Models::PaymentOrder::ReferenceNumber#reference_number_type
         module ReferenceNumberType
-          extend ModernTreasury::Enum
+          extend ModernTreasury::Internal::Type::Enum
 
           ACH_ORIGINAL_TRACE_NUMBER = :ach_original_trace_number
           ACH_TRACE_NUMBER = :ach_trace_number
@@ -732,6 +748,7 @@ module ModernTreasury
           JPMC_PAYMENT_BATCH_ID = :jpmc_payment_batch_id
           JPMC_PAYMENT_INFORMATION_ID = :jpmc_payment_information_id
           JPMC_PAYMENT_RETURNED_DATETIME = :jpmc_payment_returned_datetime
+          JPMC_TRANSACTION_REFERENCE_NUMBER = :jpmc_transaction_reference_number
           LOB_CHECK_ID = :lob_check_id
           OTHER = :other
           PARTIAL_SWIFT_MIR = :partial_swift_mir
@@ -739,7 +756,9 @@ module ModernTreasury
           PNC_INSTRUCTION_ID = :pnc_instruction_id
           PNC_MULTIPAYMENT_ID = :pnc_multipayment_id
           PNC_PAYMENT_TRACE_ID = :pnc_payment_trace_id
+          PNC_REQUEST_FOR_PAYMENT_ID = :pnc_request_for_payment_id
           PNC_TRANSACTION_REFERENCE_NUMBER = :pnc_transaction_reference_number
+          RBC_WIRE_REFERENCE_ID = :rbc_wire_reference_id
           RSPEC_VENDOR_PAYMENT_ID = :rspec_vendor_payment_id
           RTP_INSTRUCTION_ID = :rtp_instruction_id
           SIGNET_API_REFERENCE_ID = :signet_api_reference_id
@@ -771,8 +790,10 @@ module ModernTreasury
       end
 
       # The current status of the payment order.
+      #
+      # @see ModernTreasury::Models::PaymentOrder#status
       module Status
-        extend ModernTreasury::Enum
+        extend ModernTreasury::Internal::Type::Enum
 
         APPROVED = :approved
         CANCELLED = :cancelled
@@ -794,9 +815,11 @@ module ModernTreasury
       end
 
       # The account to which the originating of this payment should be attributed to.
-      #   Can be a `virtual_account` or `internal_account`.
+      # Can be a `virtual_account` or `internal_account`.
+      #
+      # @see ModernTreasury::Models::PaymentOrder#ultimate_originating_account
       module UltimateOriginatingAccount
-        extend ModernTreasury::Union
+        extend ModernTreasury::Internal::Type::Union
 
         variant -> { ModernTreasury::Models::VirtualAccount }
 
@@ -807,8 +830,9 @@ module ModernTreasury
         #   def self.variants; end
       end
 
+      # @see ModernTreasury::Models::PaymentOrder#ultimate_originating_account_type
       module UltimateOriginatingAccountType
-        extend ModernTreasury::Enum
+        extend ModernTreasury::Internal::Type::Enum
 
         INTERNAL_ACCOUNT = :internal_account
         VIRTUAL_ACCOUNT = :virtual_account