mix-rails 0.26.3 → 1.0.0.alpha.1

data/mix-rails-albums/script/rails

@@ -1,8 +0,0 @@
-#!/usr/bin/env ruby
-# This command will automatically be run when you run "rails" with Rails 3 gems installed from the root of your application.
-
-ENGINE_ROOT = File.expand_path('../..', __FILE__)
-ENGINE_PATH = File.expand_path('../../lib/mix-rails-albums/engine', __FILE__)
-
-require 'rails/all'
-require 'rails/engine/commands'

data/mix-rails-albums/spec/models/album_spec.rb

@@ -1,5 +0,0 @@
-require 'spec_helper'
-
-describe Album do
-  pending "add some examples to (or delete) #{__FILE__}"
-end

data/mix-rails-albums/spec/models/picture_spec.rb

@@ -1,5 +0,0 @@
-require 'spec_helper'
-
-describe Picture do
-  pending "add some examples to (or delete) #{__FILE__}"
-end

data/mix-rails-auth/.gitignore

@@ -1,7 +0,0 @@
-.bundle/
-log/*.log
-pkg/
-spec/dummy/db/*.sqlite3
-spec/dummy/log/*.log
-spec/dummy/tmp/
-spec/dummy/.sass-cache

data/mix-rails-auth/Gemfile

@@ -1,19 +0,0 @@
-source "http://rubygems.org"
-
-# Declare your gem's dependencies in auth.gemspec.
-# Bundler will treat runtime dependencies like base dependencies, and
-# development dependencies will be added by default to the :development group.
-gemspec
-
-# jquery-rails is used by the dummy application
-gem "rolify"
-gem "jquery-rails"
-gem "rspec-rails"
-
-# Declare any dependencies that are still in development here instead of in
-# your gemspec. These might include edge Rails or gems from your path or
-# Git. Remember to move these dependencies to your gemspec before releasing
-# your gem to rubygems.org.
-
-# To use debugger
-# gem 'debugger'

data/mix-rails-auth/MIT-LICENSE

@@ -1,20 +0,0 @@
-Copyright 2012 YOURNAME
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

data/mix-rails-auth/README.rdoc

@@ -1,3 +0,0 @@
-= Auth
-
-This project rocks and uses MIT-LICENSE.

data/mix-rails-auth/Rakefile

@@ -1,27 +0,0 @@
-#!/usr/bin/env rake
-begin
-  require 'bundler/setup'
-rescue LoadError
-  puts 'You must `gem install bundler` and `bundle install` to run rake tasks'
-end
-begin
-  require 'rdoc/task'
-rescue LoadError
-  require 'rdoc/rdoc'
-  require 'rake/rdoctask'
-  RDoc::Task = Rake::RDocTask
-end
-
-RDoc::Task.new(:rdoc) do |rdoc|
-  rdoc.rdoc_dir = 'rdoc'
-  rdoc.title    = 'Auth'
-  rdoc.options << '--line-numbers'
-  rdoc.rdoc_files.include('README.rdoc')
-  rdoc.rdoc_files.include('lib/**/*.rb')
-end
-
-
-
-
-Bundler::GemHelper.install_tasks
-

data/mix-rails-auth/app/assets/javascripts/admix/users.js

@@ -1,2 +0,0 @@
-// Place all the behaviors and hooks related to the matching controller here.
-// All this logic will automatically be available in application.js.

data/mix-rails-auth/app/assets/stylesheets/admix/users.css

@@ -1,4 +0,0 @@
-/*
-  Place all the styles related to the matching controller here.
-  They will automatically be included in application.css.
-*/

data/mix-rails-auth/app/controllers/admix/roles_controller.rb

@@ -1,3 +0,0 @@
-class Admix::RolesController < Admix::InheritedController
-  
-end

data/mix-rails-auth/app/controllers/admix/users_controller.rb

@@ -1,8 +0,0 @@
-class Admix::UsersController < Admix::InheritedController
-
-  protected
-  def crumb_field
-    "email"
-  end
-  
-end

data/mix-rails-auth/app/helpers/admix/users_helper.rb

@@ -1,5 +0,0 @@
-module Admix::UsersHelper
-  def form_attributes
-    %w(email password password_confirmation)
-  end
-end

data/mix-rails-auth/app/models/role.rb

@@ -1,9 +0,0 @@
-class Role < ActiveRecord::Base
-  has_and_belongs_to_many :users, :join_table => :users_roles
-  belongs_to :resource, :polymorphic => true
-  
-  scopify
-
-  attr_accessible :name, :user_ids
-
-end

data/mix-rails-auth/app/models/user.rb

@@ -1,13 +0,0 @@
-class User < ActiveRecord::Base
-  rolify
-  include Authority::UserAbilities
-  # Include default devise modules. Others available are:
-  # :token_authenticatable, :confirmable,
-  # :lockable, :timeoutable and :omniauthable
-  devise :database_authenticatable, :registerable,
-         :recoverable, :rememberable, :trackable, :validatable
-
-  # Setup accessible (or protected) attributes for your model
-  attr_accessible :email, :password, :password_confirmation, :remember_me
-  # attr_accessible :title, :body
-end

data/mix-rails-auth/app/views/admix/roles/_form_config.haml

@@ -1,4 +0,0 @@
-- admix_tab t('roles.role') do |t|
-  -t.tab_content do
-    = f.input :name, as: 'string'
-    = f.association :users, as: :check_boxes, collection: User.all, label_method: :email, value_method: :id

data/mix-rails-auth/app/views/admix/roles/_show.html.haml

@@ -1,4 +0,0 @@
-%dl
-  %dt= input_label(:roles, :name)
-  %dd= resource.name
-

data/mix-rails-auth/app/views/admix/roles/_table_actions.html.haml

@@ -1,3 +0,0 @@
-= link_to image_tag('admix/zoom.png'), resource_url(resource), class: 'btn', title:'Visualizar'
-= link_to image_tag('admix/page_edit.png'), edit_resource_url(resource), class: 'btn', title:'Editar'
-= link_to image_tag('admix/cancel.png'), resource_url(resource), method: :delete, data: { confirm: t('admix.crud.destroy_confirm') }, class: 'btn', title:'Deletar'

data/mix-rails-auth/app/views/admix/users/_form_config.haml

@@ -1,7 +0,0 @@
-- admix_tab t('users.user') do |t|
-  -t.tab_content do
-    = f.input :email, as: 'string'
-    = f.input :password, as: 'password'
-    = f.input :roles, :as => :select, :collection => Role.all
-  
-

data/mix-rails-auth/app/views/admix/users/_show.html.haml

@@ -1,4 +0,0 @@
-%dl
-  %dt= t('users.fields.email')
-  %dd= resource.email
-

data/mix-rails-auth/config/initializers/devise.rb

@@ -1,232 +0,0 @@
-# Use this hook to configure devise mailer, warden hooks and so forth.
-# Many of these configuration options can be set straight in your model.
-Devise.setup do |config|
-  # ==> Mailer Configuration
-  # Configure the e-mail address which will be shown in Devise::Mailer,
-  # note that it will be overwritten if you use your own mailer class with default "from" parameter.
-  config.mailer_sender = "sadjow@mixinternet.com.br"
-
-  # Configure the class responsible to send e-mails.
-  # config.mailer = "Devise::Mailer"
-
-  # ==> ORM configuration
-  # Load and configure the ORM. Supports :active_record (default) and
-  # :mongoid (bson_ext recommended) by default. Other ORMs may be
-  # available as additional gems.
-  require 'devise/orm/active_record'
-
-  # ==> Configuration for any authentication mechanism
-  # Configure which keys are used when authenticating a user. The default is
-  # just :email. You can configure it to use [:username, :subdomain], so for
-  # authenticating a user, both parameters are required. Remember that those
-  # parameters are used only when authenticating and not when retrieving from
-  # session. If you need permissions, you should implement that in a before filter.
-  # You can also supply a hash where the value is a boolean determining whether
-  # or not authentication should be aborted when the value is not present.
-  # config.authentication_keys = [ :email ]
-
-  # Configure parameters from the request object used for authentication. Each entry
-  # given should be a request method and it will automatically be passed to the
-  # find_for_authentication method and considered in your model lookup. For instance,
-  # if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
-  # The same considerations mentioned for authentication_keys also apply to request_keys.
-  # config.request_keys = []
-
-  # Configure which authentication keys should be case-insensitive.
-  # These keys will be downcased upon creating or modifying a user and when used
-  # to authenticate or find a user. Default is :email.
-  config.case_insensitive_keys = [ :email ]
-
-  # Configure which authentication keys should have whitespace stripped.
-  # These keys will have whitespace before and after removed upon creating or
-  # modifying a user and when used to authenticate or find a user. Default is :email.
-  config.strip_whitespace_keys = [ :email ]
-
-  # Tell if authentication through request.params is enabled. True by default.
-  # It can be set to an array that will enable params authentication only for the
-  # given strategies, for example, `config.params_authenticatable = [:database]` will
-  # enable it only for database (email + password) authentication.
-  # config.params_authenticatable = true
-
-  # Tell if authentication through HTTP Basic Auth is enabled. False by default.
-  # It can be set to an array that will enable http authentication only for the
-  # given strategies, for example, `config.http_authenticatable = [:token]` will
-  # enable it only for token authentication.
-  # config.http_authenticatable = false
-
-  # If http headers should be returned for AJAX requests. True by default.
-  # config.http_authenticatable_on_xhr = true
-
-  # The realm used in Http Basic Authentication. "Application" by default.
-  # config.http_authentication_realm = "Application"
-
-  # It will change confirmation, password recovery and other workflows
-  # to behave the same regardless if the e-mail provided was right or wrong.
-  # Does not affect registerable.
-  # config.paranoid = true
-
-  # By default Devise will store the user in session. You can skip storage for
-  # :http_auth and :token_auth by adding those symbols to the array below.
-  # Notice that if you are skipping storage for all authentication paths, you
-  # may want to disable generating routes to Devise's sessions controller by
-  # passing :skip => :sessions to `devise_for` in your config/routes.rb
-  config.skip_session_storage = [:http_auth]
-
-  # ==> Configuration for :database_authenticatable
-  # For bcrypt, this is the cost for hashing the password and defaults to 10. If
-  # using other encryptors, it sets how many times you want the password re-encrypted.
-  #
-  # Limiting the stretches to just one in testing will increase the performance of
-  # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use
-  # a value less than 10 in other environments.
-  config.stretches = Rails.env.test? ? 1 : 10
-
-  # Setup a pepper to generate the encrypted password.
-  # config.pepper = "5b046673f47fe250ab1561959eee00d884aff9d4e240994d83d0bcc1d6812cfb92a4a8fd6d69f8c00ffa55a03e57b732e0510137b1a585636ccea778ed19df68"
-
-  # ==> Configuration for :confirmable
-  # A period that the user is allowed to access the website even without
-  # confirming his account. For instance, if set to 2.days, the user will be
-  # able to access the website for two days without confirming his account,
-  # access will be blocked just in the third day. Default is 0.days, meaning
-  # the user cannot access the website without confirming his account.
-  # config.allow_unconfirmed_access_for = 2.days
-
-  # If true, requires any email changes to be confirmed (exactly the same way as
-  # initial account confirmation) to be applied. Requires additional unconfirmed_email
-  # db field (see migrations). Until confirmed new email is stored in
-  # unconfirmed email column, and copied to email column on successful confirmation.
-  config.reconfirmable = true
-
-  # Defines which key will be used when confirming an account
-  # config.confirmation_keys = [ :email ]
-
-  # ==> Configuration for :rememberable
-  # The time the user will be remembered without asking for credentials again.
-  # config.remember_for = 2.weeks
-
-  # If true, extends the user's remember period when remembered via cookie.
-  # config.extend_remember_period = false
-
-  # Options to be passed to the created cookie. For instance, you can set
-  # :secure => true in order to force SSL only cookies.
-  # config.rememberable_options = {}
-
-  # ==> Configuration for :validatable
-  # Range for password length. Default is 6..128.
-  # config.password_length = 6..128
-
-  # Email regex used to validate email formats. It simply asserts that
-  # an one (and only one) @ exists in the given string. This is mainly
-  # to give user feedback and not to assert the e-mail validity.
-  # config.email_regexp = /\A[^@]+@[^@]+\z/
-
-  # ==> Configuration for :timeoutable
-  # The time you want to timeout the user session without activity. After this
-  # time the user will be asked for credentials again. Default is 30 minutes.
-  # config.timeout_in = 30.minutes
-  
-  # If true, expires auth token on session timeout.
-  # config.expire_auth_token_on_timeout = false
-
-  # ==> Configuration for :lockable
-  # Defines which strategy will be used to lock an account.
-  # :failed_attempts = Locks an account after a number of failed attempts to sign in.
-  # :none            = No lock strategy. You should handle locking by yourself.
-  # config.lock_strategy = :failed_attempts
-
-  # Defines which key will be used when locking and unlocking an account
-  # config.unlock_keys = [ :email ]
-
-  # Defines which strategy will be used to unlock an account.
-  # :email = Sends an unlock link to the user email
-  # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
-  # :both  = Enables both strategies
-  # :none  = No unlock strategy. You should handle unlocking by yourself.
-  # config.unlock_strategy = :both
-
-  # Number of authentication tries before locking an account if lock_strategy
-  # is failed attempts.
-  # config.maximum_attempts = 20
-
-  # Time interval to unlock the account if :time is enabled as unlock_strategy.
-  # config.unlock_in = 1.hour
-
-  # ==> Configuration for :recoverable
-  #
-  # Defines which key will be used when recovering the password for an account
-  # config.reset_password_keys = [ :email ]
-
-  # Time interval you can reset your password with a reset password key.
-  # Don't put a too small interval or your users won't have the time to
-  # change their passwords.
-  config.reset_password_within = 6.hours
-
-  # ==> Configuration for :encryptable
-  # Allow you to use another encryption algorithm besides bcrypt (default). You can use
-  # :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1,
-  # :authlogic_sha512 (then you should set stretches above to 20 for default behavior)
-  # and :restful_authentication_sha1 (then you should set stretches to 10, and copy
-  # REST_AUTH_SITE_KEY to pepper)
-  # config.encryptor = :sha512
-
-  # ==> Configuration for :token_authenticatable
-  # Defines name of the authentication token params key
-  # config.token_authentication_key = :auth_token
-
-  # ==> Scopes configuration
-  # Turn scoped views on. Before rendering "sessions/new", it will first check for
-  # "users/sessions/new". It's turned off by default because it's slower if you
-  # are using only default views.
-  # config.scoped_views = false
-
-  # Configure the default scope given to Warden. By default it's the first
-  # devise role declared in your routes (usually :user).
-  # config.default_scope = :user
-
-  # Set this configuration to false if you want /users/sign_out to sign out
-  # only the current scope. By default, Devise signs out all scopes.
-  # config.sign_out_all_scopes = true
-
-  # ==> Navigation configuration
-  # Lists the formats that should be treated as navigational. Formats like
-  # :html, should redirect to the sign in page when the user does not have
-  # access, but formats like :xml or :json, should return 401.
-  #
-  # If you have any extra navigational formats, like :iphone or :mobile, you
-  # should add them to the navigational formats lists.
-  #
-  # The "*/*" below is required to match Internet Explorer requests.
-  # config.navigational_formats = ["*/*", :html]
-
-  # The default HTTP method used to sign out a resource. Default is :delete.
-  config.sign_out_via = :delete
-
-  # ==> OmniAuth
-  # Add a new OmniAuth provider. Check the wiki for more information on setting
-  # up on your models and hooks.
-  # config.omniauth :github, 'APP_ID', 'APP_SECRET', :scope => 'user,public_repo'
-
-  # ==> Warden configuration
-  # If you want to use other strategies, that are not supported by Devise, or
-  # change the failure app, you can configure them inside the config.warden block.
-  #
-  # config.warden do |manager|
-  #   manager.intercept_401 = false
-  #   manager.default_strategies(:scope => :user).unshift :some_external_strategy
-  # end
-
-  # ==> Mountable engine configurations
-  # When using Devise inside an engine, let's call it `MyEngine`, and this engine
-  # is mountable, there are some extra configurations to be taken into account.
-  # The following options are available, assuming the engine is mounted as:
-  #
-  #     mount MyEngine, at: "/my_engine"
-  #
-  # The router that invoked `devise_for`, in the example above, would be:
-  # config.router_name = :my_engine
-  #
-  # When using omniauth, Devise cannot automatically set Omniauth path,
-  # so you need to do it manually. For the users scope, it would be:
-  # config.omniauth_path_prefix = "/my_engine/users/auth"
-end

data/mix-rails-auth/config/initializers/rolify.rb

@@ -1,8 +0,0 @@
-Rolify.configure do |config|
-  # By default ORM adapter is ActiveRecord. uncomment to use mongoid
-  # config.use_mongoid
-  
-  # Dynamic shortcuts for User class (user.is_admin? like methods). Default is: false
-  # Enable this feature _after_ running rake db:migrate as it relies on the roles table
-  # config.use_dynamic_shortcuts
-end