microstation 0.4.1 → 0.8.3

data/plot/pdf.plt

@@ -1,163 +1,163 @@
-;----------------------------------------------------------------------
-;
-;  Portable Document file (PDF) Plotter Driver Configuration file
-;
-;  Current Revision:
-;  $RCSfile: pdf.plt,v $
-;  $Revision: 1.1.2.16.2.1 $  $Date: 2004/03/23 21:07:42 $
-;
-;----------------------------------------------------------------------
-
-;======================================================================
-;
-;   >>>>> WARNING  WARNING  WARNING  WARNING  WARNING  WARNING  <<<<<
-;  
-;  Plotter driver configuration files are now stored in two directories:
-;
-;    $(_USTN_WORKSPACEROOT)/System/plotdrv/
-;    $(_USTN_WORKSPACEROOT)/Standards/plotdrv/
-;
-;  System/plotdrv/ should be reserved for .plt files delivered by
-;  MicroStation and other Bentley products. Standards/plotdrv/ is
-;  provided as a place for you to store customized .plt files. To
-;  simplify plotter selection from the Plot dialog, you may also
-;  elect to store frequently-used .plt files in Standards/plotdrv/
-;  even if you do not customize them.
-;
-;  To minimize the risk of losing your changes during a product
-;  reinstallation, do not edit the files in the System/plotdrv/
-;  directory. Instead, copy the necessary files to Standards/plotdrv/
-;  and edit them there. If the .plt file depends on other files, such
-;  as PostScript prolog (*.pro) files, copy them to the same directory.
-;
-;======================================================================
-; Construction/active points are plotted by default. Comment out the next line
-; if you do not want points plotted.
-
-point_size          = 0.03
-default_extension   = 'pdf'       ; default extension for plotfiles
-document_set
-model               = mdl
-driver              = pdf
-autocenter                      ; Automatically center plot on page
-
-num_pens = 255 ; required record, must precede any "pen" records.
-change_pen = both
-
-; Remove this record if no border is desired.
-; Refer to the documentation for available border qualifiers.
-border /filename /time /text_height=0.35
-
-; Substitute the name of a pentable file to be loaded when this driver is selected
-;pentable=\dir\file.tbl
-
-;=================================================================
-;Turn the Book Marks on and off
-CmdName /appname="pdf" /command="BookMarks" /qualifier="On"
-;CmdName /appname="pdf" /command="BookMarks" /qualifier="Off"
-;on by default
-;=================================================================
-
-;=================================================================
-;Turn the Level/File optional content on and off
-;CmdName /appname="pdf" /command="FileOptionalContent" /qualifier="On"
-CmdName /appname="pdf" /command="FileOptionalContent" /qualifier="Off"
-;off by default
-;=================================================================
-
-;=================================================================
-;Turn Engineering links on and off
-CmdName /appname="pdf" /command="EngineeringLinks" /qualifier="On"
-;CmdName /appname="pdf" /command="EngineeringLinks" /qualifier="Off"
-;on by default
-;=================================================================
-
-;=================================================================
-;pick the version of pdf you want to support
-CmdName /appname="pdf" /command="version" /qualifier="Acrobat 6 (PDF 1.5)/Viewable in Acrobat 5"
-;CmdName /appname="pdf" /command="version" /qualifier="Acrobat 6 (PDF 1.5)"
-;CmdName /appname="pdf" /command="version" /qualifier="Acrobat 5 (PDF 1.4)"
-;=================================================================
-
-;=================================================================
-;uncomment the line and change the qualifier to your password
-;if you wish to protect the output pdf file.
-;NOTE the pdf file will not view with out the password
-;But then is unprotected
-;CmdName /appname="pdf" /command="userpassword" /qualifier="my_password"
-;=================================================================
-
-;=================================================================
-;RGB Raster compression
-;CmdName /appname="pdf" /command="RGBRasterCompression" /qualifier="jpeg"
-CmdName /appname="pdf" /command="RGBRasterCompression" /qualifier="zipped"
-;zipped by default
-;=================================================================
-
-;=================================================================
-;Searchable Text
-CmdName /appname="pdf" /command="SearchableText" /qualifier="on"
-;CmdName /appname="pdf" /command="SearchableText" /qualifier="off"
-;on by default
-;=================================================================
-
-
-; ENGLISH resolution and SIZE records
-size=(44,34)/num=0/off=(0,0)/name="ANSI E"
-size=(34,22)/num=0/off=(0,0)/name="ANSI D"
-size=(22,17)/num=0/off=(0,0)/name="ANSI C"
-size=(17,11)/num=0/off=(0,0)/name="ANSI B"
-size=(11,8.5)/num=0/off=(0,0)/name="ANSI A"
-resolution(IN)=(0.001666666666666666666667,0.001666666666666666666667) ;600DPI
-
-; METRIC resolution and SIZE records
-;size=(1189,841)/num=0/off=(0,0)/name="ISO A0"
-;size=(841,594)/num=0/off=(0,0)/name="ISO A1"
-;size=(594,420)/num=0/off=(0,0)/name="ISO A2"
-;size=(420,297)/num=0/off=(0,0)/name="ISO A3"
-;size=(297,210)/num=0/off=(0,0)/name="ISO A4"
-;resolution(MM)=(0.04233333333333333333333,0.04233333333333333333333); 600DPI
-
-;  The style records define how the design file line codes (styles)
-;  are to be plotted.  Values are in plotter units (resolutions).
-;  Values determine pen down/up movements, where (10,28) for a dot
-;  pattern leaves the pen down for 10 units and up for 28 units.  The
-;  /nohardware switch causes software stroking with these values.
-; This example has the /nohardware option commented
-; out, so the printer will draw the styles.
-
-style(1)=(18, 18)                  ;/nohardware     ;style = dot
-style(2)=(37, 37)                  ;/nohardware     ;style = med dash
-style(3)=(75, 75)                  ;/nohardware     ;style = long dash
-style(4)=(75, 37, 18, 37)          ;/nohardware     ;style = dot-dash
-style(5)=(27, 27)                  ;/nohardware     ;style = short dash
-style(6)=(75, 37, 18, 37, 18, 37)  ;/nohardware     ;style = dash-dot-dot
-style(7)=(75, 27, 32, 27)          ;/nohardware     ;style = long dash - short dash
-
-stroke_tolerance=9.0
-largest_polygon=200000
-linecap     = 0                 ; 0=butt, 1=round, 2=square
-linejoin    = 0                 ; 0=mitered, 1=round, 2=bevel
-miter_limit = 3.0               ; larger values mean longer spikes
-                                ; 1=none, 1.415=90deg, 2=60deg, 10=11deg etc.
-
-; Specify the mapping of MicroStation line weights to line thickness on paper.
-; Units are MM, IN, or DOTS (the default)
-
-weight_strokes(mm)=(0.250, 0.375, 0.500, 0.625, 0.750, 0.875, 1.000, 1.125, \
-                    1.250, 1.375, 1.500, 1.625, 1.750, 1.875, 2.000, 2.125, \
-                    2.250, 2.375, 2.500, 2.625, 2.750, 2.875, 3.000, 3.125, \
-                    3.250, 3.375, 3.500, 3.625, 3.750, 3.875, 4.000, 4.125)
-
-
-
-; The following options control raster plotting.
-isv_raster=1            ; Plots the raster image,  1=On 0=Off   Default=1
-pixel_resolution=300    ; Resolution of pixels on output (dpi)  Default=300
-contrast=50             ; Contrast in percent, between 0-100    Default=50
-brightness=50           ; Brightness in percent, between 0-100  Default=50
-raster_fence=1          ; Clip the raster to fence, 1=On 0=Off  Default=1
-grayscale=0             ; Plot in gray scale,  1=On 0=Off       Default=0
-no_dgnraster=0          ; MS plot of 87/88, 1=Don't plot 0=Plot Default=0
-background = 0          ; 0=white,1=black,2=color               Default=0
-no_rasterref=0          ; MS plot of 90's,  1=Don't plot 0=Plot Default=0
+;----------------------------------------------------------------------
+;
+;  Portable Document file (PDF) Plotter Driver Configuration file
+;
+;  Current Revision:
+;  $RCSfile: pdf.plt,v $
+;  $Revision: 1.1.2.16.2.1 $  $Date: 2004/03/23 21:07:42 $
+;
+;----------------------------------------------------------------------
+
+;======================================================================
+;
+;   >>>>> WARNING  WARNING  WARNING  WARNING  WARNING  WARNING  <<<<<
+;  
+;  Plotter driver configuration files are now stored in two directories:
+;
+;    $(_USTN_WORKSPACEROOT)/System/plotdrv/
+;    $(_USTN_WORKSPACEROOT)/Standards/plotdrv/
+;
+;  System/plotdrv/ should be reserved for .plt files delivered by
+;  MicroStation and other Bentley products. Standards/plotdrv/ is
+;  provided as a place for you to store customized .plt files. To
+;  simplify plotter selection from the Plot dialog, you may also
+;  elect to store frequently-used .plt files in Standards/plotdrv/
+;  even if you do not customize them.
+;
+;  To minimize the risk of losing your changes during a product
+;  reinstallation, do not edit the files in the System/plotdrv/
+;  directory. Instead, copy the necessary files to Standards/plotdrv/
+;  and edit them there. If the .plt file depends on other files, such
+;  as PostScript prolog (*.pro) files, copy them to the same directory.
+;
+;======================================================================
+; Construction/active points are plotted by default. Comment out the next line
+; if you do not want points plotted.
+
+point_size          = 0.03
+default_extension   = 'pdf'       ; default extension for plotfiles
+document_set
+model               = mdl
+driver              = pdf
+autocenter                      ; Automatically center plot on page
+
+num_pens = 255 ; required record, must precede any "pen" records.
+change_pen = both
+
+; Remove this record if no border is desired.
+; Refer to the documentation for available border qualifiers.
+border /filename /time /text_height=0.35
+
+; Substitute the name of a pentable file to be loaded when this driver is selected
+;pentable=\dir\file.tbl
+
+;=================================================================
+;Turn the Book Marks on and off
+CmdName /appname="pdf" /command="BookMarks" /qualifier="On"
+;CmdName /appname="pdf" /command="BookMarks" /qualifier="Off"
+;on by default
+;=================================================================
+
+;=================================================================
+;Turn the Level/File optional content on and off
+;CmdName /appname="pdf" /command="FileOptionalContent" /qualifier="On"
+CmdName /appname="pdf" /command="FileOptionalContent" /qualifier="Off"
+;off by default
+;=================================================================
+
+;=================================================================
+;Turn Engineering links on and off
+CmdName /appname="pdf" /command="EngineeringLinks" /qualifier="On"
+;CmdName /appname="pdf" /command="EngineeringLinks" /qualifier="Off"
+;on by default
+;=================================================================
+
+;=================================================================
+;pick the version of pdf you want to support
+CmdName /appname="pdf" /command="version" /qualifier="Acrobat 6 (PDF 1.5)/Viewable in Acrobat 5"
+;CmdName /appname="pdf" /command="version" /qualifier="Acrobat 6 (PDF 1.5)"
+;CmdName /appname="pdf" /command="version" /qualifier="Acrobat 5 (PDF 1.4)"
+;=================================================================
+
+;=================================================================
+;uncomment the line and change the qualifier to your password
+;if you wish to protect the output pdf file.
+;NOTE the pdf file will not view with out the password
+;But then is unprotected
+;CmdName /appname="pdf" /command="userpassword" /qualifier="my_password"
+;=================================================================
+
+;=================================================================
+;RGB Raster compression
+;CmdName /appname="pdf" /command="RGBRasterCompression" /qualifier="jpeg"
+CmdName /appname="pdf" /command="RGBRasterCompression" /qualifier="zipped"
+;zipped by default
+;=================================================================
+
+;=================================================================
+;Searchable Text
+CmdName /appname="pdf" /command="SearchableText" /qualifier="on"
+;CmdName /appname="pdf" /command="SearchableText" /qualifier="off"
+;on by default
+;=================================================================
+
+
+; ENGLISH resolution and SIZE records
+size=(44,34)/num=0/off=(0,0)/name="ANSI E"
+size=(34,22)/num=0/off=(0,0)/name="ANSI D"
+size=(22,17)/num=0/off=(0,0)/name="ANSI C"
+size=(17,11)/num=0/off=(0,0)/name="ANSI B"
+size=(11,8.5)/num=0/off=(0,0)/name="ANSI A"
+resolution(IN)=(0.001666666666666666666667,0.001666666666666666666667) ;600DPI
+
+; METRIC resolution and SIZE records
+;size=(1189,841)/num=0/off=(0,0)/name="ISO A0"
+;size=(841,594)/num=0/off=(0,0)/name="ISO A1"
+;size=(594,420)/num=0/off=(0,0)/name="ISO A2"
+;size=(420,297)/num=0/off=(0,0)/name="ISO A3"
+;size=(297,210)/num=0/off=(0,0)/name="ISO A4"
+;resolution(MM)=(0.04233333333333333333333,0.04233333333333333333333); 600DPI
+
+;  The style records define how the design file line codes (styles)
+;  are to be plotted.  Values are in plotter units (resolutions).
+;  Values determine pen down/up movements, where (10,28) for a dot
+;  pattern leaves the pen down for 10 units and up for 28 units.  The
+;  /nohardware switch causes software stroking with these values.
+; This example has the /nohardware option commented
+; out, so the printer will draw the styles.
+
+style(1)=(18, 18)                  ;/nohardware     ;style = dot
+style(2)=(37, 37)                  ;/nohardware     ;style = med dash
+style(3)=(75, 75)                  ;/nohardware     ;style = long dash
+style(4)=(75, 37, 18, 37)          ;/nohardware     ;style = dot-dash
+style(5)=(27, 27)                  ;/nohardware     ;style = short dash
+style(6)=(75, 37, 18, 37, 18, 37)  ;/nohardware     ;style = dash-dot-dot
+style(7)=(75, 27, 32, 27)          ;/nohardware     ;style = long dash - short dash
+
+stroke_tolerance=9.0
+largest_polygon=200000
+linecap     = 0                 ; 0=butt, 1=round, 2=square
+linejoin    = 0                 ; 0=mitered, 1=round, 2=bevel
+miter_limit = 3.0               ; larger values mean longer spikes
+                                ; 1=none, 1.415=90deg, 2=60deg, 10=11deg etc.
+
+; Specify the mapping of MicroStation line weights to line thickness on paper.
+; Units are MM, IN, or DOTS (the default)
+
+weight_strokes(mm)=(0.250, 0.375, 0.500, 0.625, 0.750, 0.875, 1.000, 1.125, \
+                    1.250, 1.375, 1.500, 1.625, 1.750, 1.875, 2.000, 2.125, \
+                    2.250, 2.375, 2.500, 2.625, 2.750, 2.875, 3.000, 3.125, \
+                    3.250, 3.375, 3.500, 3.625, 3.750, 3.875, 4.000, 4.125)
+
+
+
+; The following options control raster plotting.
+isv_raster=1            ; Plots the raster image,  1=On 0=Off   Default=1
+pixel_resolution=300    ; Resolution of pixels on output (dpi)  Default=300
+contrast=50             ; Contrast in percent, between 0-100    Default=50
+brightness=50           ; Brightness in percent, between 0-100  Default=50
+raster_fence=1          ; Clip the raster to fence, 1=On 0=Off  Default=1
+grayscale=0             ; Plot in gray scale,  1=On 0=Off       Default=0
+no_dgnraster=0          ; MS plot of 87/88, 1=Don't plot 0=Plot Default=0
+background = 0          ; 0=white,1=black,2=color               Default=0
+no_rasterref=0          ; MS plot of 90's,  1=Don't plot 0=Plot Default=0

data/plot/png.plt

@@ -1,383 +1,383 @@
-;----------------------------------------------------------------------
-;
-;  Portable Network Graphics (PNG) Output File Plotter Configuration file
-;
-;  Current Revision:
-;  $RCSfile: png.plt,v $
-;  $Revision: 7.18.2.5 $  $Date: 2004/02/06 20:55:47 $
-;
-;----------------------------------------------------------------------
-
-;======================================================================
-;
-;   >>>>> WARNING  WARNING  WARNING  WARNING  WARNING  WARNING  <<<<<
-;  
-;  Plotter driver configuration files are now stored in two directories:
-;
-;    $(_USTN_WORKSPACEROOT)/System/plotdrv/
-;    $(_USTN_WORKSPACEROOT)/Standards/plotdrv/
-;
-;  System/plotdrv/ should be reserved for .plt files delivered by
-;  MicroStation and other Bentley products. Standards/plotdrv/ is
-;  provided as a place for you to store customized .plt files. To
-;  simplify plotter selection from the Plot dialog, you may also
-;  elect to store frequently-used .plt files in Standards/plotdrv/
-;  even if you do not customize them.
-;
-;  To minimize the risk of losing your changes during a product
-;  reinstallation, do not edit the files in the System/plotdrv/
-;  directory. Instead, copy the necessary files to Standards/plotdrv/
-;  and edit them there. If the .plt file depends on other files, such
-;  as PostScript prolog (*.pro) files, copy them to the same directory.
-;
-;======================================================================
-
-num_pens   = 255                ; required record, must precede any "pen" records.
-change_pen = both               ; options are color, weight, level or both
-model      = MDL                ; plotter model number
-driver     = lorip              ; MDL driver to use
-autocenter                      ; Automatically center plot on page
-
-; Refer to the documentation for available border qualifiers.
-; Note that only the border outline is supported in this driver.
-;border 
-
-default_extension = 'png'       ; default extension for plotfiles
-;
-; To configure a default output file name comment out the default_extension
-; line above and uncomment this line.  "c:\tmp\color256.png" may be substituted
-; with any desired filename - e.g. "$(MS_PLTFILES)plotfile.000"
-;
-;default_outFile/auto_overwrite = "c:\tmp\color256.png"
-
-; Using this line allows you to change the mime-type returned by Publisher
-; when it uses this .plt file to satisfy a request.
-;SymbolAssign/IgnoreError=SymNotFound/name="mspTransaction_szMimeType"/value="image/png"
-
-size=(100,100)/off=(0,0)/name=max     ; Mandatory form name for Publisher
-size=(80,64)/off=(0,0)/name=1280x1024 ; leave room for border and border text
-size=(64,48)/off=(0,0)/name=1024x768  ; leave room for border and border text
-size=(50,37.5)/off=(0,0)/name=800x600    ; leave room for border and border text
-size=(40,30)/off=(0,0)/name=640x480    ; leave room for border and border text
-resolution(IN)=(0.0625, 0.0625)         ; 50 inches / 800 dots == 16 dpi
-
-; Stroke_tolerance determines tolerance for arcs and circles.  Value is
-; between 0 and 10 with 10 being the tightest tolerance.  Larger values
-; also create larger plot files.
-stroke_tolerance=10
-
-;
-;  Pen 0 is the 'background' pen.  Other pens get their color by default from
-;  the corresponding color in the current design file color table.  The background
-;  pen instead defaults to white.  To have the background pen get it's value from
-;  the master file color table, we assign it an RGB of(-1, -1, -1).
-;
-pen(0)=/rgb=(-1, -1, -1)    ; get background pen color from master file background color
-
-; Format = 28 tells the lorip driver to generate a PNG file.
-raster_compression/format=28/methods=(0)
-
-;  The style records define how the design file line codes (styles)
-;  are to be plotted.  Values are in plotter units (units of device resolution).
-;  Values determine pen down/up movements, where (10,28) for a dot
-;  pattern leaves the pen down for 10 units and up for 28 units.  The
-;  /nohardware switch causes software stroking with these values.
-
-style(1)=(1, 6)                 /nohardware     ;style = dot
-style(2)=(6, 4)                 /nohardware     ;style = med dash
-style(3)=(10, 4)                /nohardware     ;style = long dash
-style(4)=(8, 4, 1, 4)           /nohardware     ;style = dot-dash
-style(5)=(3, 4)                 /nohardware     ;style = short dash
-style(6)=(1, 4, 7, 4, 1, 4)     /nohardware     ;style = dash-dot-dot
-style(7)=(9, 4, 3, 4)           /nohardware     ;style = long dash - short dash
-
-;  The weight line determines the number of strokes to use with each weight.
-;  The first position defines weight 0, second weight 1, third weight 2 and
-;  so on up to weight 31. To increase or decrease the number of plotter units per
-;  weight, change the number in that position.
-
-weight_strokes=(1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13,14,14,15,15,16,16)
-
-; Construction/active points are plotted by default. Comment out the next line
-; if you do not want points plotted.
-point_size = .35
-
-largest_polygon=20000
-
-; The pen_width record determines how far the pen moves when drawing
-; thick lines (weights) or when used to fill elements.  Since this is
-; a rasterizing plotter driver, we want to move the pen 1 plotter coordinate
-; (1 pixel).
-pen_width(1)=1
-pen_width(2)=1
-pen_width(3)=1
-pen_width(4)=1
-pen_width(5)=1
-pen_width(6)=1
-pen_width(7)=1
-pen_width(8)=1
-pen_width(9)=1
-pen_width(10)=1
-pen_width(11)=1
-pen_width(12)=1
-pen_width(13)=1
-pen_width(14)=1
-pen_width(15)=1
-pen_width(16)=1
-pen_width(17)=1
-pen_width(18)=1
-pen_width(19)=1
-pen_width(20)=1
-pen_width(21)=1
-pen_width(22)=1
-pen_width(23)=1
-pen_width(24)=1
-pen_width(25)=1
-pen_width(26)=1
-pen_width(27)=1
-pen_width(28)=1
-pen_width(29)=1
-pen_width(30)=1
-pen_width(31)=1
-pen_width(32)=1
-pen_width(33)=1
-pen_width(34)=1
-pen_width(35)=1
-pen_width(36)=1
-pen_width(37)=1
-pen_width(38)=1
-pen_width(39)=1
-pen_width(40)=1
-pen_width(41)=1
-pen_width(42)=1
-pen_width(43)=1
-pen_width(44)=1
-pen_width(45)=1
-pen_width(46)=1
-pen_width(47)=1
-pen_width(48)=1
-pen_width(49)=1
-pen_width(50)=1
-pen_width(51)=1
-pen_width(52)=1
-pen_width(53)=1
-pen_width(54)=1
-pen_width(55)=1
-pen_width(56)=1
-pen_width(57)=1
-pen_width(58)=1
-pen_width(59)=1
-pen_width(60)=1
-pen_width(61)=1
-pen_width(62)=1
-pen_width(63)=1
-pen_width(64)=1
-pen_width(65)=1
-pen_width(66)=1
-pen_width(67)=1
-pen_width(68)=1
-pen_width(69)=1
-pen_width(70)=1
-pen_width(71)=1
-pen_width(72)=1
-pen_width(73)=1
-pen_width(74)=1
-pen_width(75)=1
-pen_width(76)=1
-pen_width(77)=1
-pen_width(78)=1
-pen_width(79)=1
-pen_width(80)=1
-pen_width(81)=1
-pen_width(82)=1
-pen_width(83)=1
-pen_width(84)=1
-pen_width(85)=1
-pen_width(86)=1
-pen_width(87)=1
-pen_width(88)=1
-pen_width(89)=1
-pen_width(90)=1
-pen_width(91)=1
-pen_width(92)=1
-pen_width(93)=1
-pen_width(94)=1
-pen_width(95)=1
-pen_width(96)=1
-pen_width(97)=1
-pen_width(98)=1
-pen_width(99)=1
-pen_width(100)=1
-pen_width(101)=1
-pen_width(102)=1
-pen_width(103)=1
-pen_width(104)=1
-pen_width(105)=1
-pen_width(106)=1
-pen_width(107)=1
-pen_width(108)=1
-pen_width(109)=1
-pen_width(110)=1
-pen_width(111)=1
-pen_width(112)=1
-pen_width(113)=1
-pen_width(114)=1
-pen_width(115)=1
-pen_width(116)=1
-pen_width(117)=1
-pen_width(118)=1
-pen_width(119)=1
-pen_width(120)=1
-pen_width(121)=1
-pen_width(122)=1
-pen_width(123)=1
-pen_width(124)=1
-pen_width(125)=1
-pen_width(126)=1
-pen_width(127)=1
-pen_width(128)=1
-pen_width(129)=1
-pen_width(130)=1
-pen_width(131)=1
-pen_width(132)=1
-pen_width(133)=1
-pen_width(134)=1
-pen_width(135)=1
-pen_width(136)=1
-pen_width(137)=1
-pen_width(138)=1
-pen_width(139)=1
-pen_width(140)=1
-pen_width(141)=1
-pen_width(142)=1
-pen_width(143)=1
-pen_width(144)=1
-pen_width(145)=1
-pen_width(146)=1
-pen_width(147)=1
-pen_width(148)=1
-pen_width(149)=1
-pen_width(150)=1
-pen_width(151)=1
-pen_width(152)=1
-pen_width(153)=1
-pen_width(154)=1
-pen_width(155)=1
-pen_width(156)=1
-pen_width(157)=1
-pen_width(158)=1
-pen_width(159)=1
-pen_width(160)=1
-pen_width(161)=1
-pen_width(162)=1
-pen_width(163)=1
-pen_width(164)=1
-pen_width(165)=1
-pen_width(166)=1
-pen_width(167)=1
-pen_width(168)=1
-pen_width(169)=1
-pen_width(170)=1
-pen_width(171)=1
-pen_width(172)=1
-pen_width(173)=1
-pen_width(174)=1
-pen_width(175)=1
-pen_width(176)=1
-pen_width(177)=1
-pen_width(178)=1
-pen_width(179)=1
-pen_width(180)=1
-pen_width(181)=1
-pen_width(182)=1
-pen_width(183)=1
-pen_width(184)=1
-pen_width(185)=1
-pen_width(186)=1
-pen_width(187)=1
-pen_width(188)=1
-pen_width(189)=1
-pen_width(190)=1
-pen_width(191)=1
-pen_width(192)=1
-pen_width(193)=1
-pen_width(194)=1
-pen_width(195)=1
-pen_width(196)=1
-pen_width(197)=1
-pen_width(198)=1
-pen_width(199)=1
-pen_width(200)=1
-pen_width(201)=1
-pen_width(202)=1
-pen_width(203)=1
-pen_width(204)=1
-pen_width(205)=1
-pen_width(206)=1
-pen_width(207)=1
-pen_width(208)=1
-pen_width(209)=1
-pen_width(210)=1
-pen_width(211)=1
-pen_width(212)=1
-pen_width(213)=1
-pen_width(214)=1
-pen_width(215)=1
-pen_width(216)=1
-pen_width(217)=1
-pen_width(218)=1
-pen_width(219)=1
-pen_width(220)=1
-pen_width(221)=1
-pen_width(222)=1
-pen_width(223)=1
-pen_width(224)=1
-pen_width(225)=1
-pen_width(226)=1
-pen_width(227)=1
-pen_width(228)=1
-pen_width(229)=1
-pen_width(230)=1
-pen_width(231)=1
-pen_width(232)=1
-pen_width(233)=1
-pen_width(234)=1
-pen_width(235)=1
-pen_width(236)=1
-pen_width(237)=1
-pen_width(238)=1
-pen_width(239)=1
-pen_width(240)=1
-pen_width(241)=1
-pen_width(242)=1
-pen_width(243)=1
-pen_width(244)=1
-pen_width(245)=1
-pen_width(246)=1
-pen_width(247)=1
-pen_width(248)=1
-pen_width(249)=1
-pen_width(250)=1
-pen_width(251)=1
-pen_width(252)=1
-pen_width(253)=1
-pen_width(254)=1
-pen_width(255)=1
-
-
-; The following options control printing of Raster Manager images.
-; Refer to the "Printing Using Raster Manager" section of the documentation
-; for descriptions of these records.
-
-software_raster/resolution=16/background=black
-
-PIXEL_RESOLUTION    = 75
-GRAYSCALE           = 0
-BACKGROUND          = 2
-CONTRAST            = 50
-BRIGHTNESS          = 50
-NO_RASTERREF        = 0
-
-; The following record specifies whether type 87/88 raster elements are printed.
-; This record is ignored by Raster Manager. 
-NO_DGNRASTER = 0 ; 0=plot, 1=don't plot (the default is to plot).
+;----------------------------------------------------------------------
+;
+;  Portable Network Graphics (PNG) Output File Plotter Configuration file
+;
+;  Current Revision:
+;  $RCSfile: png.plt,v $
+;  $Revision: 7.18.2.5 $  $Date: 2004/02/06 20:55:47 $
+;
+;----------------------------------------------------------------------
+
+;======================================================================
+;
+;   >>>>> WARNING  WARNING  WARNING  WARNING  WARNING  WARNING  <<<<<
+;  
+;  Plotter driver configuration files are now stored in two directories:
+;
+;    $(_USTN_WORKSPACEROOT)/System/plotdrv/
+;    $(_USTN_WORKSPACEROOT)/Standards/plotdrv/
+;
+;  System/plotdrv/ should be reserved for .plt files delivered by
+;  MicroStation and other Bentley products. Standards/plotdrv/ is
+;  provided as a place for you to store customized .plt files. To
+;  simplify plotter selection from the Plot dialog, you may also
+;  elect to store frequently-used .plt files in Standards/plotdrv/
+;  even if you do not customize them.
+;
+;  To minimize the risk of losing your changes during a product
+;  reinstallation, do not edit the files in the System/plotdrv/
+;  directory. Instead, copy the necessary files to Standards/plotdrv/
+;  and edit them there. If the .plt file depends on other files, such
+;  as PostScript prolog (*.pro) files, copy them to the same directory.
+;
+;======================================================================
+
+num_pens   = 255                ; required record, must precede any "pen" records.
+change_pen = both               ; options are color, weight, level or both
+model      = MDL                ; plotter model number
+driver     = lorip              ; MDL driver to use
+autocenter                      ; Automatically center plot on page
+
+; Refer to the documentation for available border qualifiers.
+; Note that only the border outline is supported in this driver.
+;border 
+
+default_extension = 'png'       ; default extension for plotfiles
+;
+; To configure a default output file name comment out the default_extension
+; line above and uncomment this line.  "c:\tmp\color256.png" may be substituted
+; with any desired filename - e.g. "$(MS_PLTFILES)plotfile.000"
+;
+;default_outFile/auto_overwrite = "c:\tmp\color256.png"
+
+; Using this line allows you to change the mime-type returned by Publisher
+; when it uses this .plt file to satisfy a request.
+;SymbolAssign/IgnoreError=SymNotFound/name="mspTransaction_szMimeType"/value="image/png"
+
+size=(100,100)/off=(0,0)/name=max     ; Mandatory form name for Publisher
+size=(80,64)/off=(0,0)/name=1280x1024 ; leave room for border and border text
+size=(64,48)/off=(0,0)/name=1024x768  ; leave room for border and border text
+size=(50,37.5)/off=(0,0)/name=800x600    ; leave room for border and border text
+size=(40,30)/off=(0,0)/name=640x480    ; leave room for border and border text
+resolution(IN)=(0.0625, 0.0625)         ; 50 inches / 800 dots == 16 dpi
+
+; Stroke_tolerance determines tolerance for arcs and circles.  Value is
+; between 0 and 10 with 10 being the tightest tolerance.  Larger values
+; also create larger plot files.
+stroke_tolerance=10
+
+;
+;  Pen 0 is the 'background' pen.  Other pens get their color by default from
+;  the corresponding color in the current design file color table.  The background
+;  pen instead defaults to white.  To have the background pen get it's value from
+;  the master file color table, we assign it an RGB of(-1, -1, -1).
+;
+pen(0)=/rgb=(-1, -1, -1)    ; get background pen color from master file background color
+
+; Format = 28 tells the lorip driver to generate a PNG file.
+raster_compression/format=28/methods=(0)
+
+;  The style records define how the design file line codes (styles)
+;  are to be plotted.  Values are in plotter units (units of device resolution).
+;  Values determine pen down/up movements, where (10,28) for a dot
+;  pattern leaves the pen down for 10 units and up for 28 units.  The
+;  /nohardware switch causes software stroking with these values.
+
+style(1)=(1, 6)                 /nohardware     ;style = dot
+style(2)=(6, 4)                 /nohardware     ;style = med dash
+style(3)=(10, 4)                /nohardware     ;style = long dash
+style(4)=(8, 4, 1, 4)           /nohardware     ;style = dot-dash
+style(5)=(3, 4)                 /nohardware     ;style = short dash
+style(6)=(1, 4, 7, 4, 1, 4)     /nohardware     ;style = dash-dot-dot
+style(7)=(9, 4, 3, 4)           /nohardware     ;style = long dash - short dash
+
+;  The weight line determines the number of strokes to use with each weight.
+;  The first position defines weight 0, second weight 1, third weight 2 and
+;  so on up to weight 31. To increase or decrease the number of plotter units per
+;  weight, change the number in that position.
+
+weight_strokes=(1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13,14,14,15,15,16,16)
+
+; Construction/active points are plotted by default. Comment out the next line
+; if you do not want points plotted.
+point_size = .35
+
+largest_polygon=20000
+
+; The pen_width record determines how far the pen moves when drawing
+; thick lines (weights) or when used to fill elements.  Since this is
+; a rasterizing plotter driver, we want to move the pen 1 plotter coordinate
+; (1 pixel).
+pen_width(1)=1
+pen_width(2)=1
+pen_width(3)=1
+pen_width(4)=1
+pen_width(5)=1
+pen_width(6)=1
+pen_width(7)=1
+pen_width(8)=1
+pen_width(9)=1
+pen_width(10)=1
+pen_width(11)=1
+pen_width(12)=1
+pen_width(13)=1
+pen_width(14)=1
+pen_width(15)=1
+pen_width(16)=1
+pen_width(17)=1
+pen_width(18)=1
+pen_width(19)=1
+pen_width(20)=1
+pen_width(21)=1
+pen_width(22)=1
+pen_width(23)=1
+pen_width(24)=1
+pen_width(25)=1
+pen_width(26)=1
+pen_width(27)=1
+pen_width(28)=1
+pen_width(29)=1
+pen_width(30)=1
+pen_width(31)=1
+pen_width(32)=1
+pen_width(33)=1
+pen_width(34)=1
+pen_width(35)=1
+pen_width(36)=1
+pen_width(37)=1
+pen_width(38)=1
+pen_width(39)=1
+pen_width(40)=1
+pen_width(41)=1
+pen_width(42)=1
+pen_width(43)=1
+pen_width(44)=1
+pen_width(45)=1
+pen_width(46)=1
+pen_width(47)=1
+pen_width(48)=1
+pen_width(49)=1
+pen_width(50)=1
+pen_width(51)=1
+pen_width(52)=1
+pen_width(53)=1
+pen_width(54)=1
+pen_width(55)=1
+pen_width(56)=1
+pen_width(57)=1
+pen_width(58)=1
+pen_width(59)=1
+pen_width(60)=1
+pen_width(61)=1
+pen_width(62)=1
+pen_width(63)=1
+pen_width(64)=1
+pen_width(65)=1
+pen_width(66)=1
+pen_width(67)=1
+pen_width(68)=1
+pen_width(69)=1
+pen_width(70)=1
+pen_width(71)=1
+pen_width(72)=1
+pen_width(73)=1
+pen_width(74)=1
+pen_width(75)=1
+pen_width(76)=1
+pen_width(77)=1
+pen_width(78)=1
+pen_width(79)=1
+pen_width(80)=1
+pen_width(81)=1
+pen_width(82)=1
+pen_width(83)=1
+pen_width(84)=1
+pen_width(85)=1
+pen_width(86)=1
+pen_width(87)=1
+pen_width(88)=1
+pen_width(89)=1
+pen_width(90)=1
+pen_width(91)=1
+pen_width(92)=1
+pen_width(93)=1
+pen_width(94)=1
+pen_width(95)=1
+pen_width(96)=1
+pen_width(97)=1
+pen_width(98)=1
+pen_width(99)=1
+pen_width(100)=1
+pen_width(101)=1
+pen_width(102)=1
+pen_width(103)=1
+pen_width(104)=1
+pen_width(105)=1
+pen_width(106)=1
+pen_width(107)=1
+pen_width(108)=1
+pen_width(109)=1
+pen_width(110)=1
+pen_width(111)=1
+pen_width(112)=1
+pen_width(113)=1
+pen_width(114)=1
+pen_width(115)=1
+pen_width(116)=1
+pen_width(117)=1
+pen_width(118)=1
+pen_width(119)=1
+pen_width(120)=1
+pen_width(121)=1
+pen_width(122)=1
+pen_width(123)=1
+pen_width(124)=1
+pen_width(125)=1
+pen_width(126)=1
+pen_width(127)=1
+pen_width(128)=1
+pen_width(129)=1
+pen_width(130)=1
+pen_width(131)=1
+pen_width(132)=1
+pen_width(133)=1
+pen_width(134)=1
+pen_width(135)=1
+pen_width(136)=1
+pen_width(137)=1
+pen_width(138)=1
+pen_width(139)=1
+pen_width(140)=1
+pen_width(141)=1
+pen_width(142)=1
+pen_width(143)=1
+pen_width(144)=1
+pen_width(145)=1
+pen_width(146)=1
+pen_width(147)=1
+pen_width(148)=1
+pen_width(149)=1
+pen_width(150)=1
+pen_width(151)=1
+pen_width(152)=1
+pen_width(153)=1
+pen_width(154)=1
+pen_width(155)=1
+pen_width(156)=1
+pen_width(157)=1
+pen_width(158)=1
+pen_width(159)=1
+pen_width(160)=1
+pen_width(161)=1
+pen_width(162)=1
+pen_width(163)=1
+pen_width(164)=1
+pen_width(165)=1
+pen_width(166)=1
+pen_width(167)=1
+pen_width(168)=1
+pen_width(169)=1
+pen_width(170)=1
+pen_width(171)=1
+pen_width(172)=1
+pen_width(173)=1
+pen_width(174)=1
+pen_width(175)=1
+pen_width(176)=1
+pen_width(177)=1
+pen_width(178)=1
+pen_width(179)=1
+pen_width(180)=1
+pen_width(181)=1
+pen_width(182)=1
+pen_width(183)=1
+pen_width(184)=1
+pen_width(185)=1
+pen_width(186)=1
+pen_width(187)=1
+pen_width(188)=1
+pen_width(189)=1
+pen_width(190)=1
+pen_width(191)=1
+pen_width(192)=1
+pen_width(193)=1
+pen_width(194)=1
+pen_width(195)=1
+pen_width(196)=1
+pen_width(197)=1
+pen_width(198)=1
+pen_width(199)=1
+pen_width(200)=1
+pen_width(201)=1
+pen_width(202)=1
+pen_width(203)=1
+pen_width(204)=1
+pen_width(205)=1
+pen_width(206)=1
+pen_width(207)=1
+pen_width(208)=1
+pen_width(209)=1
+pen_width(210)=1
+pen_width(211)=1
+pen_width(212)=1
+pen_width(213)=1
+pen_width(214)=1
+pen_width(215)=1
+pen_width(216)=1
+pen_width(217)=1
+pen_width(218)=1
+pen_width(219)=1
+pen_width(220)=1
+pen_width(221)=1
+pen_width(222)=1
+pen_width(223)=1
+pen_width(224)=1
+pen_width(225)=1
+pen_width(226)=1
+pen_width(227)=1
+pen_width(228)=1
+pen_width(229)=1
+pen_width(230)=1
+pen_width(231)=1
+pen_width(232)=1
+pen_width(233)=1
+pen_width(234)=1
+pen_width(235)=1
+pen_width(236)=1
+pen_width(237)=1
+pen_width(238)=1
+pen_width(239)=1
+pen_width(240)=1
+pen_width(241)=1
+pen_width(242)=1
+pen_width(243)=1
+pen_width(244)=1
+pen_width(245)=1
+pen_width(246)=1
+pen_width(247)=1
+pen_width(248)=1
+pen_width(249)=1
+pen_width(250)=1
+pen_width(251)=1
+pen_width(252)=1
+pen_width(253)=1
+pen_width(254)=1
+pen_width(255)=1
+
+
+; The following options control printing of Raster Manager images.
+; Refer to the "Printing Using Raster Manager" section of the documentation
+; for descriptions of these records.
+
+software_raster/resolution=16/background=black
+
+PIXEL_RESOLUTION    = 75
+GRAYSCALE           = 0
+BACKGROUND          = 2
+CONTRAST            = 50
+BRIGHTNESS          = 50
+NO_RASTERREF        = 0
+
+; The following record specifies whether type 87/88 raster elements are printed.
+; This record is ignored by Raster Manager. 
+NO_DGNRASTER = 0 ; 0=plot, 1=don't plot (the default is to plot).