mega-pure-kit 0.0.1

data/stripe-19.3.0/lib/stripe/params/setup_intent_confirm_params.rb

@@ -0,0 +1,1252 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  class SetupIntentConfirmParams < ::Stripe::RequestParams
+    class MandateData < ::Stripe::RequestParams
+      class CustomerAcceptance < ::Stripe::RequestParams
+        class Offline < ::Stripe::RequestParams; end
+
+        class Online < ::Stripe::RequestParams
+          # The IP address from which the Mandate was accepted by the customer.
+          attr_accessor :ip_address
+          # The user agent of the browser from which the Mandate was accepted by the customer.
+          attr_accessor :user_agent
+
+          def initialize(ip_address: nil, user_agent: nil)
+            @ip_address = ip_address
+            @user_agent = user_agent
+          end
+        end
+        # The time at which the customer accepted the Mandate.
+        attr_accessor :accepted_at
+        # If this is a Mandate accepted offline, this hash contains details about the offline acceptance.
+        attr_accessor :offline
+        # If this is a Mandate accepted online, this hash contains details about the online acceptance.
+        attr_accessor :online
+        # The type of customer acceptance information included with the Mandate. One of `online` or `offline`.
+        attr_accessor :type
+
+        def initialize(accepted_at: nil, offline: nil, online: nil, type: nil)
+          @accepted_at = accepted_at
+          @offline = offline
+          @online = online
+          @type = type
+        end
+      end
+      # This hash contains details about the customer acceptance of the Mandate.
+      attr_accessor :customer_acceptance
+
+      def initialize(customer_acceptance: nil)
+        @customer_acceptance = customer_acceptance
+      end
+    end
+
+    class PaymentMethodData < ::Stripe::RequestParams
+      class AcssDebit < ::Stripe::RequestParams
+        # Customer's bank account number.
+        attr_accessor :account_number
+        # Institution number of the customer's bank.
+        attr_accessor :institution_number
+        # Transit number of the customer's bank.
+        attr_accessor :transit_number
+
+        def initialize(account_number: nil, institution_number: nil, transit_number: nil)
+          @account_number = account_number
+          @institution_number = institution_number
+          @transit_number = transit_number
+        end
+      end
+
+      class Affirm < ::Stripe::RequestParams; end
+      class AfterpayClearpay < ::Stripe::RequestParams; end
+      class Alipay < ::Stripe::RequestParams; end
+      class Alma < ::Stripe::RequestParams; end
+      class AmazonPay < ::Stripe::RequestParams; end
+
+      class AuBecsDebit < ::Stripe::RequestParams
+        # The account number for the bank account.
+        attr_accessor :account_number
+        # Bank-State-Branch number of the bank account.
+        attr_accessor :bsb_number
+
+        def initialize(account_number: nil, bsb_number: nil)
+          @account_number = account_number
+          @bsb_number = bsb_number
+        end
+      end
+
+      class BacsDebit < ::Stripe::RequestParams
+        # Account number of the bank account that the funds will be debited from.
+        attr_accessor :account_number
+        # Sort code of the bank account. (e.g., `10-20-30`)
+        attr_accessor :sort_code
+
+        def initialize(account_number: nil, sort_code: nil)
+          @account_number = account_number
+          @sort_code = sort_code
+        end
+      end
+
+      class Bancontact < ::Stripe::RequestParams; end
+      class Billie < ::Stripe::RequestParams; end
+
+      class BillingDetails < ::Stripe::RequestParams
+        class Address < ::Stripe::RequestParams
+          # City, district, suburb, town, or village.
+          attr_accessor :city
+          # Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)).
+          attr_accessor :country
+          # Address line 1, such as the street, PO Box, or company name.
+          attr_accessor :line1
+          # Address line 2, such as the apartment, suite, unit, or building.
+          attr_accessor :line2
+          # ZIP or postal code.
+          attr_accessor :postal_code
+          # State, county, province, or region ([ISO 3166-2](https://en.wikipedia.org/wiki/ISO_3166-2)).
+          attr_accessor :state
+
+          def initialize(
+            city: nil,
+            country: nil,
+            line1: nil,
+            line2: nil,
+            postal_code: nil,
+            state: nil
+          )
+            @city = city
+            @country = country
+            @line1 = line1
+            @line2 = line2
+            @postal_code = postal_code
+            @state = state
+          end
+        end
+        # Billing address.
+        attr_accessor :address
+        # Email address.
+        attr_accessor :email
+        # Full name.
+        attr_accessor :name
+        # Billing phone number (including extension).
+        attr_accessor :phone
+        # Taxpayer identification number. Used only for transactions between LATAM buyers and non-LATAM sellers.
+        attr_accessor :tax_id
+
+        def initialize(address: nil, email: nil, name: nil, phone: nil, tax_id: nil)
+          @address = address
+          @email = email
+          @name = name
+          @phone = phone
+          @tax_id = tax_id
+        end
+      end
+
+      class Bizum < ::Stripe::RequestParams; end
+      class Blik < ::Stripe::RequestParams; end
+
+      class Boleto < ::Stripe::RequestParams
+        # The tax ID of the customer (CPF for individual consumers or CNPJ for businesses consumers)
+        attr_accessor :tax_id
+
+        def initialize(tax_id: nil)
+          @tax_id = tax_id
+        end
+      end
+
+      class Cashapp < ::Stripe::RequestParams; end
+      class Crypto < ::Stripe::RequestParams; end
+      class CustomerBalance < ::Stripe::RequestParams; end
+
+      class Eps < ::Stripe::RequestParams
+        # The customer's bank.
+        attr_accessor :bank
+
+        def initialize(bank: nil)
+          @bank = bank
+        end
+      end
+
+      class Fpx < ::Stripe::RequestParams
+        # Account holder type for FPX transaction
+        attr_accessor :account_holder_type
+        # The customer's bank.
+        attr_accessor :bank
+
+        def initialize(account_holder_type: nil, bank: nil)
+          @account_holder_type = account_holder_type
+          @bank = bank
+        end
+      end
+
+      class Giropay < ::Stripe::RequestParams; end
+      class Grabpay < ::Stripe::RequestParams; end
+
+      class Ideal < ::Stripe::RequestParams
+        # The customer's bank. Only use this parameter for existing customers. Don't use it for new customers.
+        attr_accessor :bank
+
+        def initialize(bank: nil)
+          @bank = bank
+        end
+      end
+
+      class InteracPresent < ::Stripe::RequestParams; end
+      class KakaoPay < ::Stripe::RequestParams; end
+
+      class Klarna < ::Stripe::RequestParams
+        class Dob < ::Stripe::RequestParams
+          # The day of birth, between 1 and 31.
+          attr_accessor :day
+          # The month of birth, between 1 and 12.
+          attr_accessor :month
+          # The four-digit year of birth.
+          attr_accessor :year
+
+          def initialize(day: nil, month: nil, year: nil)
+            @day = day
+            @month = month
+            @year = year
+          end
+        end
+        # Customer's date of birth
+        attr_accessor :dob
+
+        def initialize(dob: nil)
+          @dob = dob
+        end
+      end
+
+      class Konbini < ::Stripe::RequestParams; end
+      class KrCard < ::Stripe::RequestParams; end
+      class Link < ::Stripe::RequestParams; end
+      class MbWay < ::Stripe::RequestParams; end
+      class Mobilepay < ::Stripe::RequestParams; end
+      class Multibanco < ::Stripe::RequestParams; end
+
+      class NaverPay < ::Stripe::RequestParams
+        # Whether to use Naver Pay points or a card to fund this transaction. If not provided, this defaults to `card`.
+        attr_accessor :funding
+
+        def initialize(funding: nil)
+          @funding = funding
+        end
+      end
+
+      class NzBankAccount < ::Stripe::RequestParams
+        # The name on the bank account. Only required if the account holder name is different from the name of the authorized signatory collected in the PaymentMethod’s billing details.
+        attr_accessor :account_holder_name
+        # The account number for the bank account.
+        attr_accessor :account_number
+        # The numeric code for the bank account's bank.
+        attr_accessor :bank_code
+        # The numeric code for the bank account's bank branch.
+        attr_accessor :branch_code
+        # Attribute for param field reference
+        attr_accessor :reference
+        # The suffix of the bank account number.
+        attr_accessor :suffix
+
+        def initialize(
+          account_holder_name: nil,
+          account_number: nil,
+          bank_code: nil,
+          branch_code: nil,
+          reference: nil,
+          suffix: nil
+        )
+          @account_holder_name = account_holder_name
+          @account_number = account_number
+          @bank_code = bank_code
+          @branch_code = branch_code
+          @reference = reference
+          @suffix = suffix
+        end
+      end
+
+      class Oxxo < ::Stripe::RequestParams; end
+
+      class P24 < ::Stripe::RequestParams
+        # The customer's bank.
+        attr_accessor :bank
+
+        def initialize(bank: nil)
+          @bank = bank
+        end
+      end
+
+      class PayByBank < ::Stripe::RequestParams; end
+      class Payco < ::Stripe::RequestParams; end
+      class Paynow < ::Stripe::RequestParams; end
+      class Paypal < ::Stripe::RequestParams; end
+
+      class Payto < ::Stripe::RequestParams
+        # The account number for the bank account.
+        attr_accessor :account_number
+        # Bank-State-Branch number of the bank account.
+        attr_accessor :bsb_number
+        # The PayID alias for the bank account.
+        attr_accessor :pay_id
+
+        def initialize(account_number: nil, bsb_number: nil, pay_id: nil)
+          @account_number = account_number
+          @bsb_number = bsb_number
+          @pay_id = pay_id
+        end
+      end
+
+      class Pix < ::Stripe::RequestParams; end
+      class Promptpay < ::Stripe::RequestParams; end
+
+      class RadarOptions < ::Stripe::RequestParams
+        # A [Radar Session](https://docs.stripe.com/radar/radar-session) is a snapshot of the browser metadata and device details that help Radar make more accurate predictions on your payments.
+        attr_accessor :session
+
+        def initialize(session: nil)
+          @session = session
+        end
+      end
+
+      class RevolutPay < ::Stripe::RequestParams; end
+      class SamsungPay < ::Stripe::RequestParams; end
+      class Satispay < ::Stripe::RequestParams; end
+      class Scalapay < ::Stripe::RequestParams; end
+
+      class SepaDebit < ::Stripe::RequestParams
+        # IBAN of the bank account.
+        attr_accessor :iban
+
+        def initialize(iban: nil)
+          @iban = iban
+        end
+      end
+
+      class Sofort < ::Stripe::RequestParams
+        # Two-letter ISO code representing the country the bank account is located in.
+        attr_accessor :country
+
+        def initialize(country: nil)
+          @country = country
+        end
+      end
+
+      class Sunbit < ::Stripe::RequestParams; end
+      class Swish < ::Stripe::RequestParams; end
+      class Twint < ::Stripe::RequestParams; end
+
+      class Upi < ::Stripe::RequestParams
+        class MandateOptions < ::Stripe::RequestParams
+          # Amount to be charged for future payments.
+          attr_accessor :amount
+          # One of `fixed` or `maximum`. If `fixed`, the `amount` param refers to the exact amount to be charged in future payments. If `maximum`, the amount charged can be up to the value passed for the `amount` param.
+          attr_accessor :amount_type
+          # A description of the mandate or subscription that is meant to be displayed to the customer.
+          attr_accessor :description
+          # End date of the mandate or subscription.
+          attr_accessor :end_date
+
+          def initialize(amount: nil, amount_type: nil, description: nil, end_date: nil)
+            @amount = amount
+            @amount_type = amount_type
+            @description = description
+            @end_date = end_date
+          end
+        end
+        # Configuration options for setting up an eMandate
+        attr_accessor :mandate_options
+
+        def initialize(mandate_options: nil)
+          @mandate_options = mandate_options
+        end
+      end
+
+      class UsBankAccount < ::Stripe::RequestParams
+        # Account holder type: individual or company.
+        attr_accessor :account_holder_type
+        # Account number of the bank account.
+        attr_accessor :account_number
+        # Account type: checkings or savings. Defaults to checking if omitted.
+        attr_accessor :account_type
+        # The ID of a Financial Connections Account to use as a payment method.
+        attr_accessor :financial_connections_account
+        # Routing number of the bank account.
+        attr_accessor :routing_number
+
+        def initialize(
+          account_holder_type: nil,
+          account_number: nil,
+          account_type: nil,
+          financial_connections_account: nil,
+          routing_number: nil
+        )
+          @account_holder_type = account_holder_type
+          @account_number = account_number
+          @account_type = account_type
+          @financial_connections_account = financial_connections_account
+          @routing_number = routing_number
+        end
+      end
+
+      class WechatPay < ::Stripe::RequestParams; end
+      class Zip < ::Stripe::RequestParams; end
+      # If this is an `acss_debit` PaymentMethod, this hash contains details about the ACSS Debit payment method.
+      attr_accessor :acss_debit
+      # If this is an `affirm` PaymentMethod, this hash contains details about the Affirm payment method.
+      attr_accessor :affirm
+      # If this is an `AfterpayClearpay` PaymentMethod, this hash contains details about the AfterpayClearpay payment method.
+      attr_accessor :afterpay_clearpay
+      # If this is an `Alipay` PaymentMethod, this hash contains details about the Alipay payment method.
+      attr_accessor :alipay
+      # This field indicates whether this payment method can be shown again to its customer in a checkout flow. Stripe products such as Checkout and Elements use this field to determine whether a payment method can be shown as a saved payment method in a checkout flow. The field defaults to `unspecified`.
+      attr_accessor :allow_redisplay
+      # If this is a Alma PaymentMethod, this hash contains details about the Alma payment method.
+      attr_accessor :alma
+      # If this is a AmazonPay PaymentMethod, this hash contains details about the AmazonPay payment method.
+      attr_accessor :amazon_pay
+      # If this is an `au_becs_debit` PaymentMethod, this hash contains details about the bank account.
+      attr_accessor :au_becs_debit
+      # If this is a `bacs_debit` PaymentMethod, this hash contains details about the Bacs Direct Debit bank account.
+      attr_accessor :bacs_debit
+      # If this is a `bancontact` PaymentMethod, this hash contains details about the Bancontact payment method.
+      attr_accessor :bancontact
+      # If this is a `billie` PaymentMethod, this hash contains details about the Billie payment method.
+      attr_accessor :billie
+      # Billing information associated with the PaymentMethod that may be used or required by particular types of payment methods.
+      attr_accessor :billing_details
+      # If this is a `bizum` PaymentMethod, this hash contains details about the Bizum payment method.
+      attr_accessor :bizum
+      # If this is a `blik` PaymentMethod, this hash contains details about the BLIK payment method.
+      attr_accessor :blik
+      # If this is a `boleto` PaymentMethod, this hash contains details about the Boleto payment method.
+      attr_accessor :boleto
+      # If this is a `cashapp` PaymentMethod, this hash contains details about the Cash App Pay payment method.
+      attr_accessor :cashapp
+      # If this is a Crypto PaymentMethod, this hash contains details about the Crypto payment method.
+      attr_accessor :crypto
+      # If this is a `customer_balance` PaymentMethod, this hash contains details about the CustomerBalance payment method.
+      attr_accessor :customer_balance
+      # If this is an `eps` PaymentMethod, this hash contains details about the EPS payment method.
+      attr_accessor :eps
+      # If this is an `fpx` PaymentMethod, this hash contains details about the FPX payment method.
+      attr_accessor :fpx
+      # If this is a `giropay` PaymentMethod, this hash contains details about the Giropay payment method.
+      attr_accessor :giropay
+      # If this is a `grabpay` PaymentMethod, this hash contains details about the GrabPay payment method.
+      attr_accessor :grabpay
+      # If this is an `ideal` PaymentMethod, this hash contains details about the iDEAL payment method.
+      attr_accessor :ideal
+      # If this is an `interac_present` PaymentMethod, this hash contains details about the Interac Present payment method.
+      attr_accessor :interac_present
+      # If this is a `kakao_pay` PaymentMethod, this hash contains details about the Kakao Pay payment method.
+      attr_accessor :kakao_pay
+      # If this is a `klarna` PaymentMethod, this hash contains details about the Klarna payment method.
+      attr_accessor :klarna
+      # If this is a `konbini` PaymentMethod, this hash contains details about the Konbini payment method.
+      attr_accessor :konbini
+      # If this is a `kr_card` PaymentMethod, this hash contains details about the Korean Card payment method.
+      attr_accessor :kr_card
+      # If this is an `Link` PaymentMethod, this hash contains details about the Link payment method (Link is also known as Onelink in the UK).
+      attr_accessor :link
+      # If this is a MB WAY PaymentMethod, this hash contains details about the MB WAY payment method.
+      attr_accessor :mb_way
+      # Set of [key-value pairs](https://docs.stripe.com/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to `metadata`.
+      attr_accessor :metadata
+      # If this is a `mobilepay` PaymentMethod, this hash contains details about the MobilePay payment method.
+      attr_accessor :mobilepay
+      # If this is a `multibanco` PaymentMethod, this hash contains details about the Multibanco payment method.
+      attr_accessor :multibanco
+      # If this is a `naver_pay` PaymentMethod, this hash contains details about the Naver Pay payment method.
+      attr_accessor :naver_pay
+      # If this is an nz_bank_account PaymentMethod, this hash contains details about the nz_bank_account payment method.
+      attr_accessor :nz_bank_account
+      # If this is an `oxxo` PaymentMethod, this hash contains details about the OXXO payment method.
+      attr_accessor :oxxo
+      # If this is a `p24` PaymentMethod, this hash contains details about the P24 payment method.
+      attr_accessor :p24
+      # If this is a `pay_by_bank` PaymentMethod, this hash contains details about the PayByBank payment method.
+      attr_accessor :pay_by_bank
+      # If this is a `payco` PaymentMethod, this hash contains details about the PAYCO payment method.
+      attr_accessor :payco
+      # If this is a `paynow` PaymentMethod, this hash contains details about the PayNow payment method.
+      attr_accessor :paynow
+      # If this is a `paypal` PaymentMethod, this hash contains details about the PayPal payment method.
+      attr_accessor :paypal
+      # If this is a `payto` PaymentMethod, this hash contains details about the PayTo payment method.
+      attr_accessor :payto
+      # If this is a `pix` PaymentMethod, this hash contains details about the Pix payment method.
+      attr_accessor :pix
+      # If this is a `promptpay` PaymentMethod, this hash contains details about the PromptPay payment method.
+      attr_accessor :promptpay
+      # Options to configure Radar. See [Radar Session](https://docs.stripe.com/radar/radar-session) for more information.
+      attr_accessor :radar_options
+      # If this is a `revolut_pay` PaymentMethod, this hash contains details about the Revolut Pay payment method.
+      attr_accessor :revolut_pay
+      # If this is a `samsung_pay` PaymentMethod, this hash contains details about the SamsungPay payment method.
+      attr_accessor :samsung_pay
+      # If this is a `satispay` PaymentMethod, this hash contains details about the Satispay payment method.
+      attr_accessor :satispay
+      # If this is a Scalapay PaymentMethod, this hash contains details about the Scalapay payment method.
+      attr_accessor :scalapay
+      # If this is a `sepa_debit` PaymentMethod, this hash contains details about the SEPA debit bank account.
+      attr_accessor :sepa_debit
+      # If this is a `sofort` PaymentMethod, this hash contains details about the SOFORT payment method.
+      attr_accessor :sofort
+      # If this is a `sunbit` PaymentMethod, this hash contains details about the Sunbit payment method.
+      attr_accessor :sunbit
+      # If this is a `swish` PaymentMethod, this hash contains details about the Swish payment method.
+      attr_accessor :swish
+      # If this is a TWINT PaymentMethod, this hash contains details about the TWINT payment method.
+      attr_accessor :twint
+      # The type of the PaymentMethod. An additional hash is included on the PaymentMethod with a name matching this value. It contains additional information specific to the PaymentMethod type.
+      attr_accessor :type
+      # If this is a `upi` PaymentMethod, this hash contains details about the UPI payment method.
+      attr_accessor :upi
+      # If this is an `us_bank_account` PaymentMethod, this hash contains details about the US bank account payment method.
+      attr_accessor :us_bank_account
+      # If this is an `wechat_pay` PaymentMethod, this hash contains details about the wechat_pay payment method.
+      attr_accessor :wechat_pay
+      # If this is a `zip` PaymentMethod, this hash contains details about the Zip payment method.
+      attr_accessor :zip
+
+      def initialize(
+        acss_debit: nil,
+        affirm: nil,
+        afterpay_clearpay: nil,
+        alipay: nil,
+        allow_redisplay: nil,
+        alma: nil,
+        amazon_pay: nil,
+        au_becs_debit: nil,
+        bacs_debit: nil,
+        bancontact: nil,
+        billie: nil,
+        billing_details: nil,
+        bizum: nil,
+        blik: nil,
+        boleto: nil,
+        cashapp: nil,
+        crypto: nil,
+        customer_balance: nil,
+        eps: nil,
+        fpx: nil,
+        giropay: nil,
+        grabpay: nil,
+        ideal: nil,
+        interac_present: nil,
+        kakao_pay: nil,
+        klarna: nil,
+        konbini: nil,
+        kr_card: nil,
+        link: nil,
+        mb_way: nil,
+        metadata: nil,
+        mobilepay: nil,
+        multibanco: nil,
+        naver_pay: nil,
+        nz_bank_account: nil,
+        oxxo: nil,
+        p24: nil,
+        pay_by_bank: nil,
+        payco: nil,
+        paynow: nil,
+        paypal: nil,
+        payto: nil,
+        pix: nil,
+        promptpay: nil,
+        radar_options: nil,
+        revolut_pay: nil,
+        samsung_pay: nil,
+        satispay: nil,
+        scalapay: nil,
+        sepa_debit: nil,
+        sofort: nil,
+        sunbit: nil,
+        swish: nil,
+        twint: nil,
+        type: nil,
+        upi: nil,
+        us_bank_account: nil,
+        wechat_pay: nil,
+        zip: nil
+      )
+        @acss_debit = acss_debit
+        @affirm = affirm
+        @afterpay_clearpay = afterpay_clearpay
+        @alipay = alipay
+        @allow_redisplay = allow_redisplay
+        @alma = alma
+        @amazon_pay = amazon_pay
+        @au_becs_debit = au_becs_debit
+        @bacs_debit = bacs_debit
+        @bancontact = bancontact
+        @billie = billie
+        @billing_details = billing_details
+        @bizum = bizum
+        @blik = blik
+        @boleto = boleto
+        @cashapp = cashapp
+        @crypto = crypto
+        @customer_balance = customer_balance
+        @eps = eps
+        @fpx = fpx
+        @giropay = giropay
+        @grabpay = grabpay
+        @ideal = ideal
+        @interac_present = interac_present
+        @kakao_pay = kakao_pay
+        @klarna = klarna
+        @konbini = konbini
+        @kr_card = kr_card
+        @link = link
+        @mb_way = mb_way
+        @metadata = metadata
+        @mobilepay = mobilepay
+        @multibanco = multibanco
+        @naver_pay = naver_pay
+        @nz_bank_account = nz_bank_account
+        @oxxo = oxxo
+        @p24 = p24
+        @pay_by_bank = pay_by_bank
+        @payco = payco
+        @paynow = paynow
+        @paypal = paypal
+        @payto = payto
+        @pix = pix
+        @promptpay = promptpay
+        @radar_options = radar_options
+        @revolut_pay = revolut_pay
+        @samsung_pay = samsung_pay
+        @satispay = satispay
+        @scalapay = scalapay
+        @sepa_debit = sepa_debit
+        @sofort = sofort
+        @sunbit = sunbit
+        @swish = swish
+        @twint = twint
+        @type = type
+        @upi = upi
+        @us_bank_account = us_bank_account
+        @wechat_pay = wechat_pay
+        @zip = zip
+      end
+    end
+
+    class PaymentMethodOptions < ::Stripe::RequestParams
+      class AcssDebit < ::Stripe::RequestParams
+        class MandateOptions < ::Stripe::RequestParams
+          # A URL for custom mandate text to render during confirmation step.
+          # The URL will be rendered with additional GET parameters `payment_intent` and `payment_intent_client_secret` when confirming a Payment Intent,
+          # or `setup_intent` and `setup_intent_client_secret` when confirming a Setup Intent.
+          attr_accessor :custom_mandate_url
+          # List of Stripe products where this mandate can be selected automatically.
+          attr_accessor :default_for
+          # Description of the mandate interval. Only required if 'payment_schedule' parameter is 'interval' or 'combined'.
+          attr_accessor :interval_description
+          # Payment schedule for the mandate.
+          attr_accessor :payment_schedule
+          # Transaction type of the mandate.
+          attr_accessor :transaction_type
+
+          def initialize(
+            custom_mandate_url: nil,
+            default_for: nil,
+            interval_description: nil,
+            payment_schedule: nil,
+            transaction_type: nil
+          )
+            @custom_mandate_url = custom_mandate_url
+            @default_for = default_for
+            @interval_description = interval_description
+            @payment_schedule = payment_schedule
+            @transaction_type = transaction_type
+          end
+        end
+        # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
+        attr_accessor :currency
+        # Additional fields for Mandate creation
+        attr_accessor :mandate_options
+        # Bank account verification method. The default value is `automatic`.
+        attr_accessor :verification_method
+
+        def initialize(currency: nil, mandate_options: nil, verification_method: nil)
+          @currency = currency
+          @mandate_options = mandate_options
+          @verification_method = verification_method
+        end
+      end
+
+      class AmazonPay < ::Stripe::RequestParams; end
+
+      class BacsDebit < ::Stripe::RequestParams
+        class MandateOptions < ::Stripe::RequestParams
+          # Prefix used to generate the Mandate reference. Must be at most 12 characters long. Must consist of only uppercase letters, numbers, spaces, or the following special characters: '/', '_', '-', '&', '.'. Cannot begin with 'DDIC' or 'STRIPE'.
+          attr_accessor :reference_prefix
+
+          def initialize(reference_prefix: nil)
+            @reference_prefix = reference_prefix
+          end
+        end
+        # Additional fields for Mandate creation
+        attr_accessor :mandate_options
+
+        def initialize(mandate_options: nil)
+          @mandate_options = mandate_options
+        end
+      end
+
+      class Bizum < ::Stripe::RequestParams; end
+
+      class Card < ::Stripe::RequestParams
+        class MandateOptions < ::Stripe::RequestParams
+          # Amount to be charged for future payments, specified in the presentment currency.
+          attr_accessor :amount
+          # One of `fixed` or `maximum`. If `fixed`, the `amount` param refers to the exact amount to be charged in future payments. If `maximum`, the amount charged can be up to the value passed for the `amount` param.
+          attr_accessor :amount_type
+          # Currency in which future payments will be charged. Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
+          attr_accessor :currency
+          # A description of the mandate or subscription that is meant to be displayed to the customer.
+          attr_accessor :description
+          # End date of the mandate or subscription. If not provided, the mandate will be active until canceled. If provided, end date should be after start date.
+          attr_accessor :end_date
+          # Specifies payment frequency. One of `day`, `week`, `month`, `year`, or `sporadic`.
+          attr_accessor :interval
+          # The number of intervals between payments. For example, `interval=month` and `interval_count=3` indicates one payment every three months. Maximum of one year interval allowed (1 year, 12 months, or 52 weeks). This parameter is optional when `interval=sporadic`.
+          attr_accessor :interval_count
+          # Unique identifier for the mandate or subscription.
+          attr_accessor :reference
+          # Start date of the mandate or subscription. Start date should not be lesser than yesterday.
+          attr_accessor :start_date
+          # Specifies the type of mandates supported. Possible values are `india`.
+          attr_accessor :supported_types
+
+          def initialize(
+            amount: nil,
+            amount_type: nil,
+            currency: nil,
+            description: nil,
+            end_date: nil,
+            interval: nil,
+            interval_count: nil,
+            reference: nil,
+            start_date: nil,
+            supported_types: nil
+          )
+            @amount = amount
+            @amount_type = amount_type
+            @currency = currency
+            @description = description
+            @end_date = end_date
+            @interval = interval
+            @interval_count = interval_count
+            @reference = reference
+            @start_date = start_date
+            @supported_types = supported_types
+          end
+        end
+
+        class ThreeDSecure < ::Stripe::RequestParams
+          class NetworkOptions < ::Stripe::RequestParams
+            class CartesBancaires < ::Stripe::RequestParams
+              # The cryptogram calculation algorithm used by the card Issuer's ACS
+              # to calculate the Authentication cryptogram. Also known as `cavvAlgorithm`.
+              # messageExtension: CB-AVALGO
+              attr_accessor :cb_avalgo
+              # The exemption indicator returned from Cartes Bancaires in the ARes.
+              # message extension: CB-EXEMPTION; string (4 characters)
+              # This is a 3 byte bitmap (low significant byte first and most significant
+              # bit first) that has been Base64 encoded
+              attr_accessor :cb_exemption
+              # The risk score returned from Cartes Bancaires in the ARes.
+              # message extension: CB-SCORE; numeric value 0-99
+              attr_accessor :cb_score
+
+              def initialize(cb_avalgo: nil, cb_exemption: nil, cb_score: nil)
+                @cb_avalgo = cb_avalgo
+                @cb_exemption = cb_exemption
+                @cb_score = cb_score
+              end
+            end
+            # Cartes Bancaires-specific 3DS fields.
+            attr_accessor :cartes_bancaires
+
+            def initialize(cartes_bancaires: nil)
+              @cartes_bancaires = cartes_bancaires
+            end
+          end
+          # The `transStatus` returned from the card Issuer’s ACS in the ARes.
+          attr_accessor :ares_trans_status
+          # The cryptogram, also known as the "authentication value" (AAV, CAVV or
+          # AEVV). This value is 20 bytes, base64-encoded into a 28-character string.
+          # (Most 3D Secure providers will return the base64-encoded version, which
+          # is what you should specify here.)
+          attr_accessor :cryptogram
+          # The Electronic Commerce Indicator (ECI) is returned by your 3D Secure
+          # provider and indicates what degree of authentication was performed.
+          attr_accessor :electronic_commerce_indicator
+          # Network specific 3DS fields. Network specific arguments require an
+          # explicit card brand choice. The parameter `payment_method_options.card.network``
+          # must be populated accordingly
+          attr_accessor :network_options
+          # The challenge indicator (`threeDSRequestorChallengeInd`) which was requested in the
+          # AReq sent to the card Issuer's ACS. A string containing 2 digits from 01-99.
+          attr_accessor :requestor_challenge_indicator
+          # For 3D Secure 1, the XID. For 3D Secure 2, the Directory Server
+          # Transaction ID (dsTransID).
+          attr_accessor :transaction_id
+          # The version of 3D Secure that was performed.
+          attr_accessor :version
+
+          def initialize(
+            ares_trans_status: nil,
+            cryptogram: nil,
+            electronic_commerce_indicator: nil,
+            network_options: nil,
+            requestor_challenge_indicator: nil,
+            transaction_id: nil,
+            version: nil
+          )
+            @ares_trans_status = ares_trans_status
+            @cryptogram = cryptogram
+            @electronic_commerce_indicator = electronic_commerce_indicator
+            @network_options = network_options
+            @requestor_challenge_indicator = requestor_challenge_indicator
+            @transaction_id = transaction_id
+            @version = version
+          end
+        end
+        # Configuration options for setting up an eMandate for cards issued in India.
+        attr_accessor :mandate_options
+        # When specified, this parameter signals that a card has been collected
+        # as MOTO (Mail Order Telephone Order) and thus out of scope for SCA. This
+        # parameter can only be provided during confirmation.
+        attr_accessor :moto
+        # Selected network to process this SetupIntent on. Depends on the available networks of the card attached to the SetupIntent. Can be only set confirm-time.
+        attr_accessor :network
+        # We strongly recommend that you rely on our SCA Engine to automatically prompt your customers for authentication based on risk level and [other requirements](https://docs.stripe.com/strong-customer-authentication). However, if you wish to request 3D Secure based on logic from your own fraud engine, provide this option. If not provided, this value defaults to `automatic`. Read our guide on [manually requesting 3D Secure](https://docs.stripe.com/payments/3d-secure/authentication-flow#manual-three-ds) for more information on how this configuration interacts with Radar and our SCA Engine.
+        attr_accessor :request_three_d_secure
+        # If 3D Secure authentication was performed with a third-party provider,
+        # the authentication details to use for this setup.
+        attr_accessor :three_d_secure
+
+        def initialize(
+          mandate_options: nil,
+          moto: nil,
+          network: nil,
+          request_three_d_secure: nil,
+          three_d_secure: nil
+        )
+          @mandate_options = mandate_options
+          @moto = moto
+          @network = network
+          @request_three_d_secure = request_three_d_secure
+          @three_d_secure = three_d_secure
+        end
+      end
+
+      class CardPresent < ::Stripe::RequestParams; end
+
+      class Klarna < ::Stripe::RequestParams
+        class OnDemand < ::Stripe::RequestParams
+          # Your average amount value. You can use a value across your customer base, or segment based on customer type, country, etc.
+          attr_accessor :average_amount
+          # The maximum value you may charge a customer per purchase. You can use a value across your customer base, or segment based on customer type, country, etc.
+          attr_accessor :maximum_amount
+          # The lowest or minimum value you may charge a customer per purchase. You can use a value across your customer base, or segment based on customer type, country, etc.
+          attr_accessor :minimum_amount
+          # Interval at which the customer is making purchases
+          attr_accessor :purchase_interval
+          # The number of `purchase_interval` between charges
+          attr_accessor :purchase_interval_count
+
+          def initialize(
+            average_amount: nil,
+            maximum_amount: nil,
+            minimum_amount: nil,
+            purchase_interval: nil,
+            purchase_interval_count: nil
+          )
+            @average_amount = average_amount
+            @maximum_amount = maximum_amount
+            @minimum_amount = minimum_amount
+            @purchase_interval = purchase_interval
+            @purchase_interval_count = purchase_interval_count
+          end
+        end
+
+        class Subscription < ::Stripe::RequestParams
+          class NextBilling < ::Stripe::RequestParams
+            # The amount of the next charge for the subscription.
+            attr_accessor :amount
+            # The date of the next charge for the subscription in YYYY-MM-DD format.
+            attr_accessor :date
+
+            def initialize(amount: nil, date: nil)
+              @amount = amount
+              @date = date
+            end
+          end
+          # Unit of time between subscription charges.
+          attr_accessor :interval
+          # The number of intervals (specified in the `interval` attribute) between subscription charges. For example, `interval=month` and `interval_count=3` charges every 3 months.
+          attr_accessor :interval_count
+          # Name for subscription.
+          attr_accessor :name
+          # Describes the upcoming charge for this subscription.
+          attr_accessor :next_billing
+          # A non-customer-facing reference to correlate subscription charges in the Klarna app. Use a value that persists across subscription charges.
+          attr_accessor :reference
+
+          def initialize(
+            interval: nil,
+            interval_count: nil,
+            name: nil,
+            next_billing: nil,
+            reference: nil
+          )
+            @interval = interval
+            @interval_count = interval_count
+            @name = name
+            @next_billing = next_billing
+            @reference = reference
+          end
+        end
+        # The currency of the SetupIntent. Three letter ISO currency code.
+        attr_accessor :currency
+        # On-demand details if setting up a payment method for on-demand payments.
+        attr_accessor :on_demand
+        # Preferred language of the Klarna authorization page that the customer is redirected to
+        attr_accessor :preferred_locale
+        # Subscription details if setting up or charging a subscription
+        attr_accessor :subscriptions
+
+        def initialize(currency: nil, on_demand: nil, preferred_locale: nil, subscriptions: nil)
+          @currency = currency
+          @on_demand = on_demand
+          @preferred_locale = preferred_locale
+          @subscriptions = subscriptions
+        end
+      end
+
+      class Link < ::Stripe::RequestParams
+        # [Deprecated] This is a legacy parameter that no longer has any function.
+        attr_accessor :persistent_token
+
+        def initialize(persistent_token: nil)
+          @persistent_token = persistent_token
+        end
+      end
+
+      class Paypal < ::Stripe::RequestParams
+        # The PayPal Billing Agreement ID (BAID). This is an ID generated by PayPal which represents the mandate between the merchant and the customer.
+        attr_accessor :billing_agreement_id
+
+        def initialize(billing_agreement_id: nil)
+          @billing_agreement_id = billing_agreement_id
+        end
+      end
+
+      class Payto < ::Stripe::RequestParams
+        class MandateOptions < ::Stripe::RequestParams
+          # Amount that will be collected. It is required when `amount_type` is `fixed`.
+          attr_accessor :amount
+          # The type of amount that will be collected. The amount charged must be exact or up to the value of `amount` param for `fixed` or `maximum` type respectively. Defaults to `maximum`.
+          attr_accessor :amount_type
+          # Date, in YYYY-MM-DD format, after which payments will not be collected. Defaults to no end date.
+          attr_accessor :end_date
+          # The periodicity at which payments will be collected. Defaults to `adhoc`.
+          attr_accessor :payment_schedule
+          # The number of payments that will be made during a payment period. Defaults to 1 except for when `payment_schedule` is `adhoc`. In that case, it defaults to no limit.
+          attr_accessor :payments_per_period
+          # The purpose for which payments are made. Has a default value based on your merchant category code.
+          attr_accessor :purpose
+          # Date, in YYYY-MM-DD format, from which payments will be collected. Defaults to confirmation time.
+          attr_accessor :start_date
+
+          def initialize(
+            amount: nil,
+            amount_type: nil,
+            end_date: nil,
+            payment_schedule: nil,
+            payments_per_period: nil,
+            purpose: nil,
+            start_date: nil
+          )
+            @amount = amount
+            @amount_type = amount_type
+            @end_date = end_date
+            @payment_schedule = payment_schedule
+            @payments_per_period = payments_per_period
+            @purpose = purpose
+            @start_date = start_date
+          end
+        end
+        # Additional fields for Mandate creation.
+        attr_accessor :mandate_options
+
+        def initialize(mandate_options: nil)
+          @mandate_options = mandate_options
+        end
+      end
+
+      class Pix < ::Stripe::RequestParams
+        class MandateOptions < ::Stripe::RequestParams
+          # Amount to be charged for future payments. Required when `amount_type=fixed`. If not provided for `amount_type=maximum`, defaults to 40000.
+          attr_accessor :amount
+          # Determines if the amount includes the IOF tax. Defaults to `never`.
+          attr_accessor :amount_includes_iof
+          # Type of amount. Defaults to `maximum`.
+          attr_accessor :amount_type
+          # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Only `brl` is supported currently.
+          attr_accessor :currency
+          # Date when the mandate expires and no further payments will be charged, in `YYYY-MM-DD`. If not provided, the mandate will be active until canceled. If provided, end date should be after start date.
+          attr_accessor :end_date
+          # Schedule at which the future payments will be charged. Defaults to `monthly`.
+          attr_accessor :payment_schedule
+          # Subscription name displayed to buyers in their bank app. Defaults to the displayable business name.
+          attr_accessor :reference
+          # Start date of the mandate, in `YYYY-MM-DD`. Start date should be at least 3 days in the future. Defaults to 3 days after the current date.
+          attr_accessor :start_date
+
+          def initialize(
+            amount: nil,
+            amount_includes_iof: nil,
+            amount_type: nil,
+            currency: nil,
+            end_date: nil,
+            payment_schedule: nil,
+            reference: nil,
+            start_date: nil
+          )
+            @amount = amount
+            @amount_includes_iof = amount_includes_iof
+            @amount_type = amount_type
+            @currency = currency
+            @end_date = end_date
+            @payment_schedule = payment_schedule
+            @reference = reference
+            @start_date = start_date
+          end
+        end
+        # Additional fields for mandate creation.
+        attr_accessor :mandate_options
+
+        def initialize(mandate_options: nil)
+          @mandate_options = mandate_options
+        end
+      end
+
+      class SepaDebit < ::Stripe::RequestParams
+        class MandateOptions < ::Stripe::RequestParams
+          # Prefix used to generate the Mandate reference. Must be at most 12 characters long. Must consist of only uppercase letters, numbers, spaces, or the following special characters: '/', '_', '-', '&', '.'. Cannot begin with 'STRIPE'.
+          attr_accessor :reference_prefix
+
+          def initialize(reference_prefix: nil)
+            @reference_prefix = reference_prefix
+          end
+        end
+        # Additional fields for Mandate creation
+        attr_accessor :mandate_options
+
+        def initialize(mandate_options: nil)
+          @mandate_options = mandate_options
+        end
+      end
+
+      class Upi < ::Stripe::RequestParams
+        class MandateOptions < ::Stripe::RequestParams
+          # Amount to be charged for future payments.
+          attr_accessor :amount
+          # One of `fixed` or `maximum`. If `fixed`, the `amount` param refers to the exact amount to be charged in future payments. If `maximum`, the amount charged can be up to the value passed for the `amount` param.
+          attr_accessor :amount_type
+          # A description of the mandate or subscription that is meant to be displayed to the customer.
+          attr_accessor :description
+          # End date of the mandate or subscription.
+          attr_accessor :end_date
+
+          def initialize(amount: nil, amount_type: nil, description: nil, end_date: nil)
+            @amount = amount
+            @amount_type = amount_type
+            @description = description
+            @end_date = end_date
+          end
+        end
+        # Configuration options for setting up an eMandate
+        attr_accessor :mandate_options
+        # Attribute for param field setup_future_usage
+        attr_accessor :setup_future_usage
+
+        def initialize(mandate_options: nil, setup_future_usage: nil)
+          @mandate_options = mandate_options
+          @setup_future_usage = setup_future_usage
+        end
+      end
+
+      class UsBankAccount < ::Stripe::RequestParams
+        class FinancialConnections < ::Stripe::RequestParams
+          class Filters < ::Stripe::RequestParams
+            # The account subcategories to use to filter for selectable accounts. Valid subcategories are `checking` and `savings`.
+            attr_accessor :account_subcategories
+
+            def initialize(account_subcategories: nil)
+              @account_subcategories = account_subcategories
+            end
+          end
+          # Provide filters for the linked accounts that the customer can select for the payment method.
+          attr_accessor :filters
+          # The list of permissions to request. If this parameter is passed, the `payment_method` permission must be included. Valid permissions include: `balances`, `ownership`, `payment_method`, and `transactions`.
+          attr_accessor :permissions
+          # List of data features that you would like to retrieve upon account creation.
+          attr_accessor :prefetch
+          # For webview integrations only. Upon completing OAuth login in the native browser, the user will be redirected to this URL to return to your app.
+          attr_accessor :return_url
+
+          def initialize(filters: nil, permissions: nil, prefetch: nil, return_url: nil)
+            @filters = filters
+            @permissions = permissions
+            @prefetch = prefetch
+            @return_url = return_url
+          end
+        end
+
+        class MandateOptions < ::Stripe::RequestParams
+          # The method used to collect offline mandate customer acceptance.
+          attr_accessor :collection_method
+
+          def initialize(collection_method: nil)
+            @collection_method = collection_method
+          end
+        end
+
+        class Networks < ::Stripe::RequestParams
+          # Triggers validations to run across the selected networks
+          attr_accessor :requested
+
+          def initialize(requested: nil)
+            @requested = requested
+          end
+        end
+        # Additional fields for Financial Connections Session creation
+        attr_accessor :financial_connections
+        # Additional fields for Mandate creation
+        attr_accessor :mandate_options
+        # Additional fields for network related functions
+        attr_accessor :networks
+        # Bank account verification method. The default value is `automatic`.
+        attr_accessor :verification_method
+
+        def initialize(
+          financial_connections: nil,
+          mandate_options: nil,
+          networks: nil,
+          verification_method: nil
+        )
+          @financial_connections = financial_connections
+          @mandate_options = mandate_options
+          @networks = networks
+          @verification_method = verification_method
+        end
+      end
+      # If this is a `acss_debit` SetupIntent, this sub-hash contains details about the ACSS Debit payment method options.
+      attr_accessor :acss_debit
+      # If this is a `amazon_pay` SetupIntent, this sub-hash contains details about the AmazonPay payment method options.
+      attr_accessor :amazon_pay
+      # If this is a `bacs_debit` SetupIntent, this sub-hash contains details about the Bacs Debit payment method options.
+      attr_accessor :bacs_debit
+      # If this is a `bizum` SetupIntent, this sub-hash contains details about the Bizum payment method options.
+      attr_accessor :bizum
+      # Configuration for any card setup attempted on this SetupIntent.
+      attr_accessor :card
+      # If this is a `card_present` PaymentMethod, this sub-hash contains details about the card-present payment method options.
+      attr_accessor :card_present
+      # If this is a `klarna` PaymentMethod, this hash contains details about the Klarna payment method options.
+      attr_accessor :klarna
+      # If this is a `link` PaymentMethod, this sub-hash contains details about the Link payment method options (Link is also known as Onelink in the UK).
+      attr_accessor :link
+      # If this is a `paypal` PaymentMethod, this sub-hash contains details about the PayPal payment method options.
+      attr_accessor :paypal
+      # If this is a `payto` SetupIntent, this sub-hash contains details about the PayTo payment method options.
+      attr_accessor :payto
+      # If this is a `pix` SetupIntent, this sub-hash contains details about the Pix payment method options.
+      attr_accessor :pix
+      # If this is a `sepa_debit` SetupIntent, this sub-hash contains details about the SEPA Debit payment method options.
+      attr_accessor :sepa_debit
+      # If this is a `upi` SetupIntent, this sub-hash contains details about the UPI payment method options.
+      attr_accessor :upi
+      # If this is a `us_bank_account` SetupIntent, this sub-hash contains details about the US bank account payment method options.
+      attr_accessor :us_bank_account
+
+      def initialize(
+        acss_debit: nil,
+        amazon_pay: nil,
+        bacs_debit: nil,
+        bizum: nil,
+        card: nil,
+        card_present: nil,
+        klarna: nil,
+        link: nil,
+        paypal: nil,
+        payto: nil,
+        pix: nil,
+        sepa_debit: nil,
+        upi: nil,
+        us_bank_account: nil
+      )
+        @acss_debit = acss_debit
+        @amazon_pay = amazon_pay
+        @bacs_debit = bacs_debit
+        @bizum = bizum
+        @card = card
+        @card_present = card_present
+        @klarna = klarna
+        @link = link
+        @paypal = paypal
+        @payto = payto
+        @pix = pix
+        @sepa_debit = sepa_debit
+        @upi = upi
+        @us_bank_account = us_bank_account
+      end
+    end
+    # ID of the ConfirmationToken used to confirm this SetupIntent.
+    #
+    # If the provided ConfirmationToken contains properties that are also being provided in this request, such as `payment_method`, then the values in this request will take precedence.
+    attr_accessor :confirmation_token
+    # Specifies which fields in the response should be expanded.
+    attr_accessor :expand
+    # Attribute for param field mandate_data
+    attr_accessor :mandate_data
+    # ID of the payment method (a PaymentMethod, Card, or saved Source object) to attach to this SetupIntent.
+    attr_accessor :payment_method
+    # When included, this hash creates a PaymentMethod that is set as the [`payment_method`](https://docs.stripe.com/api/setup_intents/object#setup_intent_object-payment_method)
+    # value in the SetupIntent.
+    attr_accessor :payment_method_data
+    # Payment method-specific configuration for this SetupIntent.
+    attr_accessor :payment_method_options
+    # The URL to redirect your customer back to after they authenticate on the payment method's app or site.
+    # If you'd prefer to redirect to a mobile application, you can alternatively supply an application URI scheme.
+    # This parameter is only used for cards and other redirect-based payment methods.
+    attr_accessor :return_url
+    # Set to `true` when confirming server-side and using Stripe.js, iOS, or Android client-side SDKs to handle the next actions.
+    attr_accessor :use_stripe_sdk
+
+    def initialize(
+      confirmation_token: nil,
+      expand: nil,
+      mandate_data: nil,
+      payment_method: nil,
+      payment_method_data: nil,
+      payment_method_options: nil,
+      return_url: nil,
+      use_stripe_sdk: nil
+    )
+      @confirmation_token = confirmation_token
+      @expand = expand
+      @mandate_data = mandate_data
+      @payment_method = payment_method
+      @payment_method_data = payment_method_data
+      @payment_method_options = payment_method_options
+      @return_url = return_url
+      @use_stripe_sdk = use_stripe_sdk
+    end
+  end
+end