media-path 0.1.2 → 0.1.3

data/Rakefile

@@ -1,24 +0,0 @@
-# encoding: utf-8
-
-require_relative "lib/media-path/version"
-
-# ENV setup for external commands
-ENV["RUBYLIB"] = Dir["vendor/*/lib"].join(":")
-$LOAD_PATH.clear.push(*Dir["vendor/*/lib"])
-
-# http://support.runcoderun.com/faqs/builds/how-do-i-run-rake-with-trace-enabled
-Rake.application.options.trace = true
-
-# default task for RunCodeRun.com
-task :default => ["submodules:init", :spec]
-
-# load tasks
-Dir["tasks/*.rake"].each do |taskfile|
-  begin
-    load File.join(Dir.pwd, taskfile)
-  rescue Exception => exception
-    puts "Exception #{exception.class} occured during loading #{taskfile}:"
-    puts exception.message
-    puts exception.backtrace
-  end
-end

data/lib/media-path/version.rb

@@ -1,7 +0,0 @@
-# encoding: utf-8
-
-# NOTE: Do not edit this file manually, this
-# file is regenerated by task rake version:increase
-module MediaPath
-  VERSION ||= "0.1.2"
-end

data/tasks/benchmark.rake

@@ -1,11 +0,0 @@
-# encoding: utf-8
-
-# http://github.com/somebee/rbench/tree/master
-desc "Run all benchmarks"
-task :bm do
-  abort "Benchmarks doesn't work at the moment"
-  require "rbench"
-  Dir["#{Dir.pwd}/benchmarks/bm/*.rb"].each do |benchmark|
-    load benchmark
-  end
-end

data/tasks/gem.rake

@@ -1,23 +0,0 @@
-# encoding: utf-8
-
-desc "Build the gem"
-task :build do
-  sh "gem build media-path.gemspec"
-end
-
-namespace :build do
-  desc "Build the prerelease gem"
-  task :prerelease do
-    gemspec = "media-path.gemspec"
-    content = File.read(gemspec)
-    prename = "#{gemspec.split(".").first}.pre.gemspec"
-    # 0.1.1 => 0.2
-    version = MediaPath::VERSION.sub(/^(\d+)\.(\d+).*$/) { "#$1.#{$2.to_i + 1}" }
-    puts "Current #{MediaPath::VERSION} => #{version} pre"
-    File.open(prename, "w") do |file|
-      file.puts(content.gsub(/(\w+::VERSION)/, "'#{version}.pre'"))
-    end
-    sh "gem build #{prename}"
-    rm prename
-  end
-end

data/tasks/hooks.rake

@@ -1,12 +0,0 @@
-# encoding: utf-8
-
-desc "Install Git hooks"
-task :hooks do
-  if Dir.exist?(".git/hooks")
-    abort "You must remove .git/hooks first"
-  else
-    # do not symlink them, otherwise git will add samples
-    # FIXME: permissions
-    cp_r "support/hooks", ".git/hooks"
-  end
-end

data/tasks/release.rake

@@ -1,47 +0,0 @@
-# encoding: utf-8
-
-desc "Release new version of media-path"
-task release: ["version:increase", "release:tag", "release:gemcutter"]
-
-namespace :version do
-  task :increase do
-    puts "Which version are you just releasing (previous version is #{MediaPath::VERSION})"
-    version = STDIN.gets.chomp
-    File.open("lib/media-path/version.rb", "w") do |file|
-      file.puts <<-EOF
-# encoding: utf-8
-
-# NOTE: Do not edit this file manually, this
-# file is regenerated by task rake version:increase
-module MediaPath
-  VERSION ||= "#{version}"
-end
-      EOF
-    end
-
-    MediaPath.const_set("VERSION", version) # so other release tasks will work
-    sh "git commit lib/media-path/version.rb -m 'Increased version to #{version}'"
-  end
-end
-
-namespace :release do
-  desc "Create Git tag"
-  task :tag do
-    puts "Creating new git tag #{MediaPath::VERSION} and pushing it online ..."
-    sh "git tag -a -m 'Version #{MediaPath::VERSION}' #{MediaPath::VERSION}"
-    sh "git push --tags"
-    puts "Tag #{MediaPath::VERSION} was created and pushed to GitHub."
-  end
-
-  desc "Push gem to Gemcutter"
-  task :gemcutter => :build do
-    puts "Pushing to Gemcutter ..."
-    sh "gem push #{Dir["*.gem"].last}"
-  end
-end
-
-desc "Create and push prerelease gem"
-task :prerelease => "build:prerelease" do
-  puts "Pushing to Gemcutter ..."
-  sh "gem push #{Dir["*.pre.gem"].last}"
-end

data/tasks/spec.rake

@@ -1,27 +0,0 @@
-# encoding: utf-8
-
-desc "Run specs"
-task :spec, :path do |task, args|
-  exec "./script/spec --options spec/spec.opts #{args.path || "spec"}"
-end
-
-desc "Create stubs of all library files."
-task "spec:stubs" do
-  Dir.glob("lib/**/*.rb").each do |file|
-    specfile = file.sub(/^lib/, "spec").sub(/\.rb$/, '_spec.rb')
-    unless File.exist?(specfile)
-      %x[mkdir -p #{File.dirname(specfile)}]
-      %x[touch #{specfile}]
-      puts "Created #{specfile}"
-    end
-  end
-  (Dir.glob("spec/media-path/**/*.rb") + ["spec/media-path_spec.rb"]).each do |file|
-    libfile = file.sub(/spec/, "lib").sub(/_spec\.rb$/, '.rb')
-    if !File.exist?(libfile) && File.zero?(file)
-      %x[rm #{file}]
-      puts "Removed empty file #{file}"
-    elsif !File.exist?(libfile)
-      puts "File exists just in spec, not in lib: #{file}"
-    end
-  end
-end

data/tasks/submodules.rake

@@ -1,33 +0,0 @@
-# encoding: utf-8
-
-# === Helpers === #
-def submodules(&block)
-  File.foreach(File.join(File.dirname(__FILE__), "..", ".gitmodules")) do |line|
-    if line.match(%r{submodule "(.+)"})
-      block.call($1)
-    end
-  end
-end
-
-# === Tasks === #
-namespace :submodules do
-  desc "Init submodules"
-  task :init do
-    sh "git submodule init"
-  end
-
-  desc "Update submodules"
-  task :update do
-    submodules do |path|
-      if File.directory?(path) && File.directory?(File.join(path, ".git"))
-        Dir.chdir(path) do
-          puts "=> #{path}"
-          sh "git reset --hard"
-          sh "git fetch"
-          sh "git reset origin/master --hard"
-          puts
-        end
-      end
-    end
-  end
-end

data/tasks/yardoc.rake

@@ -1,9 +0,0 @@
-# encoding: utf-8
-
-# template, textile or rdoc or md
-# -t: template [available: default, javadoc]
-# -m: markup style used in documentation [available: textile, markdown, rdoc]
-desc "Generate Yardoc documentation for media-path"
-task :yardoc do
-  sh "yardoc -r README.textile lib/**/*.rb -t default"
-end

data/url.rb

@@ -1,20 +0,0 @@
-require "pupu/pupu"
-require "pupu/exceptions"
-
-module Pupu
-  class URL
-    attr_reader :path
-    # URL.new(root/pupu/autocompleter/javascripts/autocompleter.js)
-    # URL.new(Merb.root/root/pupu/autocompleter/javascripts/autocompleter.js)
-    def initialize(path)
-      path = File.expand_path(path).sub(%r[^#{Regexp::quote(::Pupu.root)}/], '')
-      raise AssetNotFound.new(path) unless File.exist?(path)
-      @path = path.sub(%r{^(.*/)?(root/.+$)}, '\2')
-    end
-
-    def url
-      url = @path.sub(%r[^#{Regexp::quote(::Pupu.media_root)}], Regexp::quote(::Pupu.media_prefix))
-      "/#{url}"
-    end
-  end
-end

data/url_spec.rb

@@ -1,35 +0,0 @@
-require_relative "../spec_helper"
-require "pupu/url"
-
-describe Pupu::URL do
-  before(:each) do
-    @fullpath = "spec/data/public/pupu/autocompleter/javascripts/autocompleter.js"
-    @relative = "data/public/pupu/autocompleter/javascripts/autocompleter.js"
-    Pupu.root = File.dirname(__FILE__) + "/data/public/root/pupu"
-    @url  = Pupu::URL.new(@fullpath)
-  end
-
-  describe "#initialize" do
-    it "should raise AssetNotFound if given path do not exist" do
-      lambda { Pupu::URL.new("i/do/not/exists") }.should raise_error(Pupu::AssetNotFound)
-    end
-  end
-
-  describe "#path" do
-    it "should be same as the path relative from current directory" do
-      @url.path.should eql(@relative)
-    end
-
-    it "should cut the path to path relative from current directory" do
-      path = "#{Dir.pwd}/spec/data/public/pupu/autocompleter/javascripts/autocompleter.js"
-      url  = Pupu::URL.new(path)
-      url.path.should eql(@relative) # yep, it still should be the same as @relative
-    end
-  end
-
-  describe "#inspect" do
-    it "should show @fullpath and url" do
-      @url.inspect.should eql(%Q{#<URL: @path="#{@relative}" url="/pupu/autocompleter/javascripts/autocompleter.js">})
-    end
-  end
-end

data/vendor/rspec/History.rdoc

@@ -1,1512 +0,0 @@
-=== development (in git)
-
-* enhancements
-  * added match_unless_raises to matcher DSL
-    * supports easy wrapping of t/u assertions in matchers
-    * thanks to Chad Fowler and Glenn Vanderburg for the name
-  * and_yield provides configurable eval_context
-    * Eric Meyer & David Chelimsky
-  * CTRL-C actually stops execution! (Bryan Helmkamp - #911)
-  * make drb port configurable (Chris Flipse - #875)
-
-* bug fixes
-  * don't define top-level context() method when running in IRB (#899)
-  * remove Ruby warning for uninitialized ivar (Bryan Helmkamp - #892)
-  * fully qualify reference to Default (Alex Sharp - #895)
-
-=== Version 1.2.9 / 2009-10-05
-
-* enhancements
-  * manage backtrace-ignore patterns with Spec::Runner.configure (Martin
-    Emde). Closes #870.
-  * friendly mock argument expectation failure message (Tim Harper). Closes
-    #868.
-  * added double() as alias for stub() and mock()
-  * failure messages for doubles, mocks and stubs use the right name
-  * add let() method to assign memoized attributes (suggestion from Stuart
-    Halloway). Closes #857.
-  * add its method so you can say:
-      describe Array do
-        its(:length) { should == 0 }
-    (Stephen Touset). Closes #833
-  * spec command automatically uses spec/spec.opts if it is present
-    (suggestion from Yehuda Katz)
-  * rspec now adds PROJECT_ROOT/lib and PROJECT_ROOT/spec to the load path
-    * determines PROJECT_ROOT by recursing up until it finds a directory
-      that has a ./spec directory (thanks to Scott Taylor)
-    * supports require 'spec_helper'
-    * supports running specs from the PROJECT_ROOT or any directory
-      below it
-    * closes #733
-  * better handling of determining test names in test/unit/interop mode
-    * Joe Ferris
-    * closes #854
-
-* bug fixes
-
-  * Fixed problem with colorized output when writing to a file
-    * Corey Ehmke
-    * closes #777
-
-* not really a bug fix or enhancement
-  * temporarily moved heckle feature to features-pending (waiting to see what
-    happens with
-    http://rubyforge.org/tracker/index.php?func=detail&aid=26786&group_id=1513&atid=5921)
-
-=== Version 1.2.8 / 2009-07-16
-
-* enhancements
-  * better messages for should[_not] be_nil (Chad Humphries and Rob Sanheim)
-  * should and should_not accept optional custom message
-    (suggestion from Rob Sanheim)
-    * result.should be_nil, "expected result to be nil"
-  * added 'spec/stubs/cucumber' to plug RSpec's stubbing framework into
-    Cucumber scenarios.
-  * added unstub method to remove a stub mid-example (Scott Taylor). Closes
-    #853.
-  * add more readable diff when expected and actual are hashes (Ryan Bigg).
-    Closes #848.
-
-* bug fixes
-  * fixed --line option for ruby 1.9.1
-  * fix stub_chain conflict between two chains starting with the same message
-    (Mike Rohland). Closes #846.
-
-=== Version 1.2.7 / 2009-06-22
-
-* enhancments
-  * added support for fakes using obj.stub(:method) { # implementation }
-  * allow subject { self } (Jarmo Pertman). Closes #816.
-  * friendly error message when a matcher returns nil on a failure message
-  * add ruby_cmd option to SpecTask (Rick DeNatale). Closes #823.
-    * also added missing specs for SpecTask - thanks Rick!
-  * add support for generating matchers with fluent interfaces with the
-    Matcher DSL
-
-* bug fixes
-  * NegativeOperatorMatcher now returns false (Wesley Beary). Closes #812.
-  * derive MockExpectationError from Exception rather than StandardError
-    (Kerry Buckley). Closes #830.
-  * fix bug where multi-line failure messages weren't getting picked up by
-    autotest (Jarmo Pertman). Closes #832.
-  * --line_number now works for it { should xxx } format (assist from Fred
-    Lee)
-  * warn instead of raise when there is no description supplied for an
-    example. Closes #840.
-
-=== Version 1.2.6 / 2009-04-30
-
-* bug fixes
-  * gem actually built with spec executable
-
-=== Version 1.2.5 / 2009-04-29
-
-* enhancements
-
-  * name argument to mock/stub is now optional (closes #782)
-    * you can do mock(:foo => "woo", :bar => "car")
-  * expect { this_block }.to change{this.expression}.from(old_value).to(new_value)
-  * expect { this_block }.to raise_error
-  * better failiure messages for equal matcher (James Byrne). Closes #804.
-  * add stub_chain method
-    * also alias_method :stub, :stub!, so you can stub with less bang
-  * added options to example_group_proxy
-
-* bug fixes
-
-  * ensure correct handling of ordered message expectations with duplicate
-    expectations (NigelThorne). Closes #793.
-  * get matcher backwards compat working w/ ruby 19
-  * don't define instance_exec unless it is not defined
-    * was doing a version check, but turns out that didn't cover alternative
-      implementations like JRuby
-  * fix bug where in some circumstances, loading lib/spec/interop/test.rb
-    raised an error (tsechingho). Closes #803.
-  * make sure specs only run against spec server when using drb (patch from Chuck Grindel). Closes #797.
-  * remove deprecation warning in example_pending when using FailingExamplesFormatter. Closes #794.
-  * Access explicit subject from nested groups of arbitrary depth. Closes #756.
-
-=== Version 1.2.4 / 2009-04-13
-
-* bug fix
-
-  * just one - update the manifest
-
-=== Version 1.2.3 / 2009-04-13
-
-* deprecations
-
-  * BaseFormatter#add_example_group (use #example_group_started instead)
-  * ExampleGroupProxy#backtrace (use #location instead)
-  * ExampleProxy#backtrace (use #location instead)
-  * BaseFormatter#example_pending now expects two arguments. The third
-    argument is deprecated.
-  * ExampleGroupProxy#filtered_description. This was only used in one place
-    internally, and was a confusing solution to the problem. If you've got a
-    custom formatter that uses it, you can just use
-    ExampleGroupProxy#description and modify it directly.
-  * predicate_matchers (use the new Matcher DSL instead)
-  * Spec::Matchers.create (use Spec::Matchers.define instead)
-
-* enhancements
-
-  * support for specifying single examples with colon syntax. Closes #712.
-    (Ben Mabey)
-    * you can now say "spec some_spec.rb:12" in addition to "spec some_spec.rb
-      --line 12"
-  * run specs locally with --drb if no drb server is running. Closes #780.
-    * still prints "No server running" to stderr
-
-* bug fixes
-
-  * support expectations on DelegateClass (Clifford T. Matthews). Closes #48.
-  * Fixed match_array blows up if elements can't be sorted (Jeff Dean). Closes #779.
-
-=== Version 1.2.2 / 2009-03-22
-
-Bug-fix release (fixes regression introduced in 1.2.1)
-
-* bug fixes
-
-  * fixed bug in which spec_parser raised an error for custom example group
-    base classes
-
-=== Version 1.2.1 / 2009-03-22
-
-This is a bug-fix release, recommended for anybody who has already upgraded to
-rspec-1.2.0.
-
-See Upgrade.rdoc for information about upgrading to rspec-1.2.1
-
-* enhancements
-
-  * matchers, including the new DSL, easily added to your test/unit tests
-  * added support for 0 to n args in matcher DSL
-  * restored loading rubygems when necessary
-    * if you really don't want to use rubygems, you
-      can set an NO_RUBYGEMS environment
-      variable, and RSpec won't force it on you.
-  * added -u/--debugger option (Rick DeNatale) #262.
-    * just add "debugger" anywhere in your code and run spec path/to/code --debugger
-  * rename ExampleDescription to ExampleProxy
-  * pass ExampleProxy to example_started(). Closes #738, #743
-    * thanks to Tobias Grimm (Eclipse) fort the patch and Roman Chernyatchik
-      (JetBrains, RubyMine) for the assist
-
-* bug fixes
-
-  * subject (implicit or explicit) is now properly inherited by nested groups. Closes #744.
-
-=== Version 1.2.0 / 2009-03-15
-
-* warnings:
-
-  * If you use the ruby command to run specs instead of the spec command, you'll
-    need to require 'spec/autorun' or they won't run. This won't affect you if
-    you use the spec command or the Spec::Rake::SpecTask that ships with RSpec.
-
-  * require 'spec/test/unit' to invoke test/unit interop if you're using
-    RSpec's core (this is handled implicitly with spec-rails)
-
-  * setup and teardown are gone - use before and after instead
-
-    * you can still use setup and teardown if you're using
-      Test::Unit::TestCase as the base ExampleGroup class (which is implicit
-      in rspec-rails)
-
-  * The matcher protocol has been improved. The old protocol is still
-    supported, so as long as you're not monkey patching rspec's built-in
-    matchers, or using extension libraries that do, this should not affect
-    you. If you run into trouble, you'll just need to change:
-
-      failure_message          => failure_message_for_should
-      negative_failure_message => failure_message_for_should_not
-
-  * All references to rubygems have been removed from within rspec's code.
-
-    * NOTE that they have been restored in 1.2.1, above
-
-    * See http://gist.github.com/54177 for rationale and suggestions on
-      alternative approaches to loading rubygems
-
-* deprecations
-
-  * BaseTextFormatter#colourize - use colorize_failure instead.
-  * BaseTextFormatter#magenta - use red instead.
-
-* enhancements
-
-  * cleaner integration with with heckle-1.4.2
-  * allow registering example groups with a path-like key (Pat Maddox)
-  * start DRb service at "druby://localhost:0" (Hongli Lai) - See http://redmine.ruby-lang.org/issues/show/496
-  * consistent reporting of errors as failures
-  * added spec/test/unit as more intuitive path to loading test/unit interop lib
-  * added explicit autorun feature for running specs with ruby command
-  * added handling for does_not_match? for matchers that want to know the context in which they were called
-  * lots of ruby 1.9.1 compatibility fixes from Chad Humprhies
-  * improved feedback from be_kind_of/be_a_kind_of/be_instance_of/be_an_instance_of (Jakub Šťastný)
-  * added --format silent (l) option, which is now the default when running --heckle (Bob Aman)
-  * sexy new custom matcher creation (Corey Haines & David Chelimsky - initial concept by Yehuda Katz)
-  * improved matcher protocol - old one is still supported, but new one is cleaner and prefered
-
-* bug fixes
-
-  * support delegating operator matchers to subject with should_not
-  * all arguments are included if --drb is specified in spec.opts (Neil Buckley). Closes #671.
-  * added --autospec option hack (used internally) to get --color to work when using --drb and autospec.
-  * Fixed mock framework failure message bug in which similar calls were excluded from the output
-  * cryptic error message on change.rb when the from value is wrong (Michael Murray). Closes #706.
-
-=== Version 1.1.12 / 2009-01-11
-
-WARNING: there was a stub/mock bug in 1.1.11 that allowed a structure that was
-not intended:
-
-  obj.stub!(:msg)
-  obj.msg
-  obj.should_receive(:msg)
-
-That would pass in 1.1.11, but should not have been allowed to, since the
-message is received before the expectation is set. This was reported (#637)
-and fixed for release 1.1.12, but may cause unexpected failures if you had
-examples set up as above.
-
-WARNING: mock.should_receive(:msg).with(an_instance_of(klass)) now correctly uses instance_of? instead of kind_of?. This may break some existing code examples, but the fix is to just use kind_of instead of an_instance_of
-
-* 3 deprecations
-
-  * deprecated ExampleMethods#implementation_backtrace - use ExampleMethods#backtrace instead
-  * deprecated ExampleGroupMethods#example_group_backtrace - use ExampleGroupMethods#backtrace instead
-  * deprecated Spec::Example::BehaviourRunner class (likely that nobody is using this)
-
-* 6 major enhancements
-
-  * it { should matcher } - support for implicit receiver of #should (Joe Ferris of thoughtbot)
-  * subject { ... } - works in conjunction with implicit receiver of #should
-  * wrap_expectation (for wrapping multiple expectations and/or t/u assertions)
-  * added array.should =~ [1,2,3] # passes if array contains exactly the same elements in any order (Jeff Dean and Pat Maddox)
-  * hash_including mock argument matcher can now accept just keys, key/value pairs, or both (David Krmpotic)
-  * added hash_not_including mock argument matcher (David Krmpotic). Closes #634.
-
-* 9 minor enhancements
-
-  * should throw_symbol accepts an optional argument: should throw_symbol(:sym, arg)
-  * fixed --line for jruby (Zach Moazeni)
-  * assorted small changes to support Ruby 1.9 (got a way to go)
-  * removed all instances of class << self - I do know who I am
-  * SpecParser can't handle backtrace paths with colons (John-Mason P. Shackelford). Closes #505.
-  * html formatter (and subsequently the textmate formatter) header fills in completely when running a single example
-  * config.include now accepts an array of types (config.include(Helpers, :type => [:view, :controller]))
-  * added be_a and be_an expectation matchers
-  * added instance_of and kind_of mock argument matchers
-
-* 9 bug fixes
-
-  * fixed bug where {:a => 1, :b => 2}.should include(:a, :b) failed (Yossef Mendelssohn)
-  * only try to load Test::Unit if Test::Unit is defined (not just Test)
-  * Allow stubs on parent and child classes simultaneously (Jim Lindley). Fixes #600.
-  * BaseTextFormatter will now create the directory in a WHERE string (Adam Anderson). Fixes #616.
-  * Removed incorrect -S flag on autospec commands. Added explicit spec command for ruby to run, guarantee running rspec (raggi). Closes #507.
-  * Check whether test/unit has really been loaded before calling a method it defines (Brian Donovan). Closes #503.
-  * Fix spec_path for shared groups (Zach Dennis). Closes #615.
-  * stubbed message expectation not verified if it has been called *before* the expectation (Matthias Hennemeyer). Closes #637.
-  * stubs calculate return value by executing block passed to #and_return (hint from Aisha Fenton). Closes #642.
-
-=== Version 1.1.11 / 2008-10-24
-
-* 1 major enhancement
-
-  * eliminate ALL gem dependencies (as they were causing trouble for people on different platforms/environments)
-
-=== Version 1.1.10 / 2008-10-24
-
-* 1 minor enhancement
-
-  * hash.should include(:key => 'value') #when you don't care about the whole hash
-
-* 2 bug fixes
-
-  * fix --help output (had inaccurate info about 'nested' formatter)
-  * eliminate spicycode-rcov dev dependency for rubygems < 1.3
-
-=== Version 1.1.9 / 2008-10-20
-
-WARNING: This release removes implicit inclusion of modules in example groups.
-This means that if you have 'describe MyModule do', MyModule will not be
-included in the group.
-
-* 2 major enhancements
-
-  * Add extend to configuration (thanks to advice from Chad Fowler)
-  * Modules are no longer implicitly included in example groups
-
-* 4 minor enhancements
-
-  * mingw indicates windows too (thanks to Luis Lavena for the tip)
-  * improved output for partial mock expecation failures
-  * it_should_behave_like now accepts n names of shared groups
-  * eliminated redundant inclusion/extension of ExampleGroupMethods
-
-* 6 bug fixes
-
-  * spec command with no arguments prints help
-  * fixed typo in help. Fixes #73.
-  * fixed bug where should_receive..and_yield after similar stub added the args_to_yield to the stub's original args_to_yield (Pat Maddox)
-  * fixed bug where rspec-autotest (autospec) was loading non-spec files in spec directory. Fixes #559.
-  * fixed bug where should_not_receive was reporting twice
-  * fixed bug where rspec tries to run examples just because it is required (even if there are no examples loaded). Fixes #575.
-
-=== Version 1.1.8 / 2008-10-03
-
-* 2 bug fixes
-
-  * restore colorized output in linux and windows w/ autotest (Tim Pope). Fixes #413.
-  * autospec no longer hangs on windows. Fixes #554.
-
-=== Version 1.1.7 / 2008-10-02
-
-* no changes since 1.1.6, but releasing rspec-1.1.7 to align versions with rspec-rails-1.1.7
-
-=== Version 1.1.6 / 2008-10-02
-
-* 2 bug fixes
-
-  * fixed bug where negative message expectations following stubs resulted in false (negative) positives (Mathias Meyer). Closes #548.
-  * fixed bug where Not Yet Implemented examples report incorrect caller (Scott Taylor). Closes #547.
-
-* 1 minor enhancement
-
-  * removed deprecated mock argument constraint symbols
-
-=== Version 1.1.5 / 2008-09-28
-
-IMPORTANT: use the new 'autospec' command instead of 'autotest'. We changed
-the way autotest discovers rspec so the autotest executable won't
-automatically load rspec anymore. This allows rspec to live side by side other
-spec frameworks without always co-opting autotest through autotest's discovery
-mechanism.
-
-ALSO IMPORTANT: $rspec_options is gone. If you were using this for anything
-(like your own runners), use Spec::Runner.options instead.
-
-ADDITIONALLY IMPORTANT: If you have any custom formatters, you'll need to
-modify #example_pending to accept three arguments instead of just two. See the
-rdoc for Spec::Runner::Formatter::BaseFormatter#example_pending for more
-information.
-
-* Consider MinGW as valid RUBY_PLATFORM for --colour option. (patch from Luis Lavena). Closes #406.
-* Added additional characters to be escaped in step strings (patch from Jake Cahoon). Closes #417.
-* Disable color codes on STDOUT when STDOUT.tty? is false (patch from Tim Pope). Closes #413.
-* mock(:null_object=>true) plays nice with HTML (patch from Gerrit Kaiser). Closes #230.
-* a step definition with no block is treated as pending
-* make sure consolidate_failures only grabs _spec files. Closes #369
-* Simplifying ExampleGroupMethods#registration_backtrace. (From Wilson Bilkovich - http://metaclass.org/2008/6/7/calling-in-the-dark)
-* Use 127.0.0.1 instead of localhost for drb (thanks Ola Bini)
-* html story formatter correctly colors story/scenario red if step fails (Patch from Joseph Wilk). Closes #300
-* plain text story formatter correctly colors story/scenario red if step fails (Patch from Joseph Wilk). Closes #439
-* quiet deprecation warning on inflector - patch from RSL. Closes #430
-* added autospec executable
-* added configurable messages to simple_matcher
-* should and should_not return true on success
-* use hoe for build/release
-* bye, bye translator
-* autotest/rspec uses ruby command instead of spec command (no need for spec command unless loading directories)
-* Avoid 'invalid option -O' in autotest (patch from Jonathan del Strother). Closes #486.
-* Fix: Unimplemented step with new line throws error (patch from Ben Mabey). Closes #494.
-* Only use color codes on tty; override for autospec (patch from Tim Pope). Closes #413.
-* Warn when setting mock expectations on nil (patch from Ben Mabey). Closes #521.
-* Support argument constraints as values in the hash_including contstraint. Thanks to Pirkka Hartikainen for failing code examples and the fix. Buttons up #501.
-* mock(:null_object=>true) plays nice with HTML (patch from Gerrit Kaiser)
-* Consider MinGW as valid RUBY_PLATFORM for --colour option. (patch from Luis Lavena). Closes #406.
-* Add 2nd arg to respond_to? to align w/ core Ruby rdoc: http://www.ruby-doc.org/core/classes/Object.html#M000604
-* quiet backtrace tweaker filters individual lines out of multiline (ala Rails) error messages (Pat Maddox)
-* added ability to stub multiple methods in one stub! call (Pat Maddox)
-* story progress bar formatter and more colourful summaries from the plain text story formatter (Joseph Wilk)
-* Avoid ruby invocation errors when autotesting (Jonathan del Strother)
-* added mock('foo').as_null_object
-* add file and line number to pending_example for formatters (Scott Taylor)
-* return last stubbed value for mock expectation with no explicit return (Pat Maddox)
-* Fixed bug when should_receive(:foo).any_number_of_times is called after similar stub (Pat Maddox)
-* Warning messages now issued when expectations are set on nil (Ben Mabey)
-
-=== Version 1.1.4
-
-Maintenance release.
-
-Note: we've removed the metaclass method from Object. There were some
-generated specs that used it, and they will now break. Just replace the
-metaclass call with (class << self; self; end) and all will be well.
-
-* added hash_including mock argument matcher. Closes #332 (patch from Rick DeNatale)
-* pending steps print out yellow in stories (patch from Kyle Hargraves)
-* Deprecation warnings for specs that assume auto-inclusion of modules. Closes #326 (patch from Scott Taylor)
-* mock.should_not_receive(:anything) fails fast (once again)
-* Patch from Antti Tarvainen to stop files from being loaded repeatedly when running heckle. Closes #333.
-* Fixed bug in which session object in example was not the same instance used in the controller. Closes #331.
-* Applied patch from Antti Tarvainen to fix bug where heckle runs rspec runs heckle runs rspec etc. Closes #280.
-* Applied patch from Zach Dennis to merge :steps functionality to :steps_for. Closes #324.
-* Applied patch from Ryan Davis to add eval of block passed to raise_error matcher. Closes #321.
-* alias :context :describe in example_group_methods. Closes #312.
-* Applied patch from Ben Mabey to make the Story runner exit with a non-0 exit code on failing stories. Closes #228.
-* Applied patch from Coda Hale to get the :red hook called in autotest. Closes #279.
-* Applied patch from Patrick Ritchie to support --drb in spec.opts. Closes #274, #293.
-* Moved metaclass method from Object to an internal module which gets included where it is needed.
-* Applied patch from Dayo Esho: and_yield clobbers return value from block. Closes #217.
-* Applied patch from Bob Cotton:  ExampleGroupFactory.default resets previously registered types. Closes #222.
-* Applied patch from Mike Williams to support the lib directory in rails apps with the Textmate Alternate File command. Closes #276.
-* ExampleGroupMethods#xspecify aliases #xit
-* A SharedExampleGroup can be created within another ExampleGroup.
-* Applied patch from Bob Cotton: Nested ExampleGroups do not have a spec_path. Closes #224.
-* Add before_suite and after_suite callbacks to ExampleGroupMethods and Options. Closes #210.
-* The after(:suite) callback lambda is passed a boolean representing whether the suite passed or failed
-* Added NestedTextFormatter. Closes #366.
-* decoupled mock framework from global extensions used by rspec - supports use of flexmock or mocha w/ rails
-* Applied patch from Roman Chernyatchik to allow the user to pass in the ruby version into spectask. Closes #325, #370
-
-=== Version 1.1.3
-
-Maintenance release.
-Notice to autotest users: you must also upgrade to ZenTest-3.9.0.
-
-* Tightened up exceptions list in autotest/rails_spec. Closes #264.
-* Applied patch from Ryan Davis for ZenTest-3.9.0 compatibility
-* Applied patch from Kero to add step_upcoming to story listeners. Closes #253.
-* Fixed bug where the wrong named error was not always caught by "should raise_error"
-* Applied patch from Luis Lavena: No coloured output on Windows due missing RUBYOPT. Closes #244.
-* Applied patch from Craig Demyanovich to add support for "should_not render_template" to rspec_on_rails. Closes #241.
-* Added --pattern (-p for short) option to control what files get loaded. Defaults to '**/*_spec.rb'
-* Exit with non-0 exit code if examples *or tests* (in test/unit interop mode) fail. Closes #203.
-* Moved at_exit hook to a method in Spec::Runner which only runs if specs get loaded. Closes #242.
-* Applied patch from kakutani ensuring that base_view_path gets cleared after each view example. Closes #235.
-* More tweaks to regexp step names
-* Fixed focused specs in nested ExampleGroups. Closes #225.
-
-=== Version 1.1.2
-
-Minor bug fixes/enhancements.
-Notice to autotest users: you must also upgrade to ZenTest-3.8.0.
-
-* RSpec's Autotest subclasses compatible with ZenTest-3.8.0 (thanks to Ryan Davis for making it easier on Autotest subs).
-* Applied patch from idl to add spec/lib to rake stats. Closes #226.
-* calling setup_fixtures and teardown_fixtures for Rails >= r8570. Closes #219.
-* Applied patch from Josh Knowles using ActiveSupport's Inflector (when available) to make 'should have' read a bit better. Closes #197.
-* Fixed regression in 1.1 that caused failing examples to fail to generate their own names. Closes #209.
-* Applied doc patch from Jens Krämer for capturing content_for
-* Applied patch from Alexander Lang to clean up story steps after each story. Closes #198.
-* Applied patch from Josh Knowles to support 'string_or_response.should have_text(...)'. Closes #193.
-* Applied patch from Ian Dees to quiet the Story Runner backtrace. Closes #183.
-* Complete support for defining steps with regexp 'names'.
-
-=== Version 1.1.1
-
-Bug fix release.
-
-* Fix regression in 1.1.0 that caused transactions to not get rolled back between examples.
-* Applied patch from Bob Cotton to reintroduce ExampleGroup.description_options. Closes LH[#186]
-
-=== Version 1.1.0
-
-The "tell me a story and go nest yourself" release.
-
-* Applied patch from Mike Vincent to handle generators rails > 2.0.1. Closes LH[#181]
-* Formatter.pending signature changed so it gets passed an ExampleGroup instance instead of the name ( LH[#180])
-* Fixed LH[#180] Spec::Rails::Example::ModelExampleGroup and friends show up in rspec/rails output
-* Spec::Rails no longer loads ActiveRecord extensions if it's disabled in config/boot.rb
-* Applied LH[#178] small annoyances running specs with warnings enabled (Patch from Mikko Lehtonen)
-* Tighter integration with Rails fixtures. Take advantage of fixture caching to get performance improvements (Thanks to Pat Maddox, Nick Kallen, Jonathan Barnes, and Curtis)
-
-=== Version 1.1.0-RC1
-
-Textmate Bundle users - this release adds a new RSpec bundle that highlights describe, it, before and after and
-provides navigation to descriptions and examples (rather than classes and methods). When you first install this,
-it is going to try to hijack all of your .rb files. All you need to do is open a .rb file that does not end with
-'spec.rb' and change the bundle selection from RSpec to Ruby. TextMate will do the right thing from then on.
-
-Shortcuts for tab-activated snippets all follow the TextMate convention of 2 or 3 letters of the first word, followed by the first letter of each subsequent word. So "should have_at_least" would be triggered by shhal.
-
-We reduced the scope for running spec directories, files, a single file or individual spec in TextMate to source.ruby.rspec. This allowed us to restore the standard Ruby shortcuts:
-
-CMD-R runs all the specs in one file
-CMD-SHIFT-R runs an individual spec
-CMD-OPT-R runs any files or directories selected in the TextMate drawer
-
-rspec_on_rails users - don't forget to run script/generate rspec
-
-* Added shared_examples_for method, which you can (should) use instead of describe Foo, :shared => true
-* Applied LH[#168] Fix describe Object, "description contains a # in it" (Patch from Martin Emde)
-* Applied LH[#15] Reverse loading of ActionView::Base helper modules (Patch from Mark Van Holstyn)
-* Applied LH[#149] Update contribute page to point towards lighthouse (Patch from Josh Knowles)
-* Applied LH[#142] verify_rcov fails with latest rcov (Patch from Kyle Hargraves)
-* Applied LH[#10] Allow stubs to yield and return values (Patch from Pat Maddox)
-* Fixed LH[#139] version.rb in trunk missing svn last changed number
-* Applied LH[#14] Adding support for by_at_least/by_at_most in Change matcher (Patch from Saimon Moore)
-* Applied LH[#12] Fix for TM when switching to alternate file (Patch from Trevor Squires)
-* Applied LH[#133] ExampleMatcher should match against before(:all) (Patch from Bob Cotton)
-* Applied LH[#134] Only load spec inside spec_helper.rb (Patch from Mark Van Holstyn)
-* RSpec now bails immediately if there are examples with identical names.
-* Applied LH[#132]  Plain Text stories should support Given and Given: (Patch from Jarkko Laine)
-* Applied patch from Pat Maddox: Story Mediator - the glue that binds the plain text story parser with the rest of the system
-* Applied LH[#16] Have SimpleMatchers expose their description for specdocs (Patch from Bryan Helmkamp)
-* Stories now support --colour
-* Changed the DSL modules to Example (i.e. Spec::Example instead of Spec::DSL)
-* Applied [#15608] Story problem if parenthesis used in Given, When, Then or And (Patch from Sinclair Bain)
-* Applied [#15659] GivenScenario fails when it is a RailsStory (Patch from Nathan Sutton)
-* Fixed [#15639] rcov exclusion configuration. (Spec::Rails projects can configure rcov with spec/rcov.opts)
-* The rdoc formatter (--format rdoc) is gone. It was buggy and noone was using it.
-* Changed Spec::DSL::Behaviour to Spec::DSL::ExampleGroup
-* Changed Spec::DSL::SharedBehaviour to Spec::DSL::SharedExampleGroup
-* Applied [#14023] Small optimization for heavily proxied objects. (Patch from Ian Leitch)
-* Applied [#13943] ProfileFormatter (Top 10 slowest examples) (Patch from Ian Leitch)
-* Fixed [#15232] heckle is not working correctly in trunk (as of r2801)
-* Applied [#14399] Show pending reasons in HTML report (Patch from Bryan Helmkamp)
-* Discovered fixed: [#10263] mock "leak" when setting an expectation in a block passed to mock#should_receive
-* Fixed [#14671] Spec::DSL::ExampleRunner gives "NO NAME because of --dry-run" for every example for 'rake spec:doc'
-* Fixed [#14543] rspec_scaffold broken with Rails 2.0
-* Removed Patch [#10577] Rails with Oracle breaks 0.9.2 - was no longer necessary since we moved describe to the Main object (instead of Object)
-* Fixed [#14527] specs run twice on rails 1.2.4 and rspec/rspec_on_rails trunk
-* Applied [#14043] Change output ordering to show pending before errors (Patch from Mike Mangino)
-* Applied [#14095] Don't have ./script/generate rspec create previous_failures.txt (Patch from Bryan Helmkamp)
-* Applied [#14254] Improved error handling for Object#should and Object#should_not (Patch from Antti Tarvainen)
-* Applied [#14186] Remove dead code from message_expecation.rb (Patch from Antti Tarvainen)
-* Applied [#14183] Tiny improvement on mock_spec.rb (Patch from Antti Tarvainen)
-* Applied [#14208] Fix to Mock#method_missing raising NameErrors instead of MockExpectationErrors (Patch from Antti Tarvainen)
-* Applied [#14255] Fixed examples in mock_spec.rb and shared_behaviour_spec.rb (Patch from Antti Tarvainen)
-* Applied [#14362] partially mocking objects that define == can blow up (Patch from Pat Maddox)
-* test_ methods with an arity of 0 defined in a describe block or Example object will be run as an Example, providing a seamless transition from Test::Unit
-* Removed BehaviourRunner
-* Fixed [#13969] Spec Failures on Trunk w/ Autotest
-* Applied [#14156] False positives with should_not (Patch from Antti Tarvainen)
-* Applied [#14170] route_for and params_from internal specs fixed (Patch from Antti Tarvainen)
-* Fixed [#14166] Cannot build trunk
-* Applied [#14142] Fix for bug #11602: Nested #have_tag specifications fails on the wrong line number (Patch from Antti Tarvainen)
-* Removed warn_if_no_files argument and feature
-* Steps (Given/When/Then) with no blocks are treated as pending
-* Applied [#13913] Scenario should treat no code block as pending (Patch from Evan Light)
-* Fixed [#13370] Weird mock expectation error (Patch from Mike Mangino)
-* Applied [#13952] Fix for performance regression introduced in r2096 (Patch from Ian Leitch)
-* Applied [#13881] Dynamically include Helpers that are included on ActionView::Base (Patch from Brandon Keepers)
-* Applied [#13833] ActionView::Helpers::JavaScriptMacrosHelper removed after 1.2.3 (Patch from Yurii Rashkovskii)
-* Applied [#13814] RSpec on Rails w/ fixture-scenarios (Patch from Shintaro Kakutani)
-* Add ability to define Example subclass instead of using describe
-* Applied Patch from James Edward Gray II to improve syntax highlighting in TextMate
-* Fixed [#13579] NoMethodError not raised for missing helper methods
-* Fixed [#13713] form helper method 'select' can not be called when calling custom helper methods from specs
-* Example subclasses Test::Unit::TestCase
-* Added stub_everything method to create a stub that will return itself for any message it doesn't understand
-* Added stories directory with stories/all.rb and stories/helper.rb when you script/generate rspec
-* Applied [#13554] Add "And" so you can say Given... And... When... Then... And...
-* Applied [#11254] RSpec syntax coloring and function pop-up integration in TextMate (Patch from Wincent Colaiuta)
-* Applied [#13143] ActionView::Helpers::RecordIdentificationHelper should be included if present (Patch from Jay Levitt)
-* Applied [#13567] patch to allow stubs to yield consecutive values (Patch from Rupert Voelcker)
-* Applied [#13559] reverse version of route_for (Patch from Rupert Voelcker)
-* Added [#13532] /lib specs should get base EvalContext
-* Applied [#13451] Add a null_object option to mock_model (Patch from James Deville)
-* Applied [#11919] Making non-implemented specs easy in textmate (Patch from Scott Taylor)
-* Applied [#13274] ThrowSymbol recognized a NameError triggered by Kernel#method_missing as a thrown Symbol
-* Applied [#12722] the alternate file command does not work in rails views due to scope (Patch from Carl Porth)
-* Behaviour is now a Module that is used by Example class methods and SharedBehaviour
-* Added ExampleDefinition
-* Added story runner framework based on rbehave [#12628]
-* Applied [#13336] Helper directory incorrect for rake stats in statsetup task (Patch from Curtis Miller)
-* Applied [#13339] Add the ability for spec_parser to parse describes with :behaviour_type set (Patch from Will Leinweber and Dav Yaginuma)
-* Fixed [#13271] incorrect behaviour with expect_render and stub_render
-* Applied [#13129] Fix failing specs in spec_distributed (Patch from Bob Cotton)
-* Applied [#13118] Rinda support for Spec::Distributed (Patch from Bob Cotton)
-* Removed BehaviourEval
-* Removed Behaviour#inherit
-* Moved implementation of install_dependencies to example_rails_app
-* Renamed RSPEC_DEPS to VENDOR_DEPS
-* Added Example#not_implemented?
-* You can now stub!(:msg).with(specific args)
-* describe("A", Hash, "with one element") will generate description "A Hash with one element" (Tip from Ola Bini)
-* Applied [#13016] [DOC] Point out that view specs render, well, a view (Patch from Jay Levitt)
-* Applied [#13078] Develop rspec with autotest (Patch from Scott Taylor)
-* Fixed [#13065] Named routes throw a NoMethodError in Helper specs (Patches from James Deville and Mike Mangino)
-* Added (back) the verbose attribute in Spec::Rake::SpecTask
-* Changed documentation to point at the new http svn URL, which is more accessible.
-
-=== Version 1.0.8
-
-Another bugfix release - this time to resolve the version mismatch
-
-=== Version 1.0.7
-
-Quick bugfix release to ensure that you don't have to have the rspec gem installed
-in order to use autotest with rspec_on_rails.
-
-* Fixed [#13015] autotest gives failure in 'spec_command' after upgrade 1.0.5 to 1.0.6
-
-=== Version 1.0.6
-
-The "holy cow, batman, it's been a long time since we released and there are a ton of bug
-fixes, patches and even new features" release.
-
-Warning: Spec::Rails users: In fixing 11508, we've removed the raise_controller_errors method. As long as you
-follow the upgrade instructions and run 'script/generate rspec' you'll be fine, but if you skip this
-step you need to manually go into spec_helper.rb and remove the call to that method (if present - it
-might not be if you haven't upgraded in a while).
-
-Warning: Implementors of custom formatters. Formatters will now be sent an Example object instead of just a
-String for #example_started, #example_passed and #example_failed. In certain scenarios
-(Spec::Ui with Spec::Distributed), the formatter must ask the Example for its sequence number instead of
-keeping track of a sequence number internal to the formatter. Most of you shouldn't need to upgrade
-your formatters though - the Example#to_s method returns the example name/description, so you should be
-able to use the passed Example instance as if it were a String.
-
-* Applied [#12986] Autotest Specs + Refactoring (Patch from Scott Tayler)
-* Added a #close method to formatters, which allows them to gracefully close streams.
-* Applied [#12935] Remove requirement that mocha must be installed as a gem when used as mocking framework. (Patch from Ryan Kinderman).
-* Fixed [#12893] RSpec's Autotest should work with rspec's trunk
-* Fixed [#12865] Partial mock error when object has an @options instance var
-* Applied [#12701] Allow checking of content captured with content_for in view specs (Patch from Jens Kr�mer)
-* Applied [#12817] Cannot include same shared behaviour when required with absolute paths (Patch from Ian Leitch)
-* Applied [#12719] rspec_on_rails should not include pagination helper (Patch from Matthijs Langenberg)
-* Fixed [#12714] helper spec not finding rails core helpers
-* Applied [#12611] should_not redirect_to implementation (Patch from Yurii Rashkovskii)
-* Applied [#12682] Not correctly aliasing original 'stub!' and 'should_receive' methods for ApplicationController (Patch from Matthijs Langenberg)
-* Disabled controller.should_receive(:render) and controller.stub!(:render). Use expect_render or stub_render instead.
-* Applied [#12484] Allow a Behaviour's Description to flow through to the Formatter (Patch from Bob Cotton)
-* Fixed [#12448] The spec:plugins rake task from rspec_on_rails should ignore specs from the rspec_on_rails plugin
-* Applied [#12300] rr integration (patch from Kyle Hargraves)
-* Implemented [#12284] mock_with :rr (integration with RR mock framework: http://rubyforge.org/projects/pivotalrb/)
-* Applied [#12237] (tiny) added full path to mate in switch_command (Patch from Carl Porth)
-* Formatters will now be sent an Example object instead of just a String for certain methods
-* All Spec::Rake::SpecTask attributes can now be procs, which allows for lazy evaluation.
-* Changed the Spec::Ui interfaces slightly. See examples.
-* Applied [#12174] mishandling of paths with spaces in spec_mate switch_command (Patch from Carl Porth)
-* Implemented [#8315] File "Go to..." functionality
-* Applied [#11917] Cleaner Spec::Ui error for failed Selenium connection (Patch from Ian Dees)
-* Applied [#11888] rspec_on_rails spews out warnings when assert_select is used with an XML response (Patch from Ian Leitch)
-* Applied [#12010] Nicer failure message formatting (Patch from Wincent Colaiuta)
-* Applied [#12156] smooth open mate patch (Patch from Ienaga Eiji)
-* Applied [#10577] Rails with Oracle breaks 0.9.2. (Patch from Sinclair Bain)
-* Fixed [#12079] auto-generated example name incomplete: should have 1 error on ....]
-* Applied [#12066] Docfix for mocks/mocks.page (Patch from Kyle Hargraves)
-* Fixed [#11891] script/generate rspec_controller fails to create appropriate views (from templates) on edge rails
-* Applied [#11921] Adds the correct controller_name from derived_controller_name() to the ViewExampleGroupController (Patch from Eloy Duran)
-* Fixed [#11903] config.include with behaviour_type 'hash' does not work
-* Examples without blocks and pending is now reported with a P instead of a *
-* Pending blocks that now pass are rendered blue
-* New behaviour for after: If an after block raises an error, the other ones will still run instead of bailing at the first.
-* Made it possible to run spec from RSpec.tmbundle with --drb against a Rails spec_server.
-* Applied [#11868] Add ability for pending to optionally hold a failing block and to fail when it passes (Patch from Bob Cotton)
-* Fixed [#11843] watir_behaviour missing from spec_ui gem
-* Added 'switch between source and spec file' command in Spec::Mate (based on code from Ruy Asan)
-* Applied [#11509] Documentation - RSpec requires hpricot
-* Applied [#11807] Daemonize spec_server and rake tasks to manage them. (patch from Kyosuke MOROHASHI)
-* Added pending(message) method
-* Fixed [#11777] should render_template doesn't check paths correctly
-* Fixed [#11749] Use of 'rescue => e' does not catch all exceptions
-* Fixed [#11793] should raise_error('with a message') does not work correctly
-* Fixed [#11774] Mocks should respond to :kind_of? in the same way they respond to :is_a?
-* Fixed [#11508] Exceptions are not raised for Controller Specs (removed experimental raise_controller_errors)
-* Applied [#11615] Partial mock methods give ambiguous failures when given a method name as a String (Patch from Jay Phillips)
-* Fixed [#11545] Rspec doesn't handle should_receive on ActiveRecord associations (Patch from Ian White)
-* Fixed [#11514] configuration.use_transactional_fixtures is ALWAYS true, regardless of assignment
-* Improved generated RESTful controller examples to cover both successful and unsuccessful POST and PUT
-* Changed TextMate snippets for controllers to pass controller class names to #describe rather than controller_name.
-* Changed TextMate snippets for mocks to use no_args() and any_args() instead of the deprecated Symbols.
-* Applied [#11500] Documentation: no rails integration specs in 1.0
-* Renamed SpecMate's shortcuts for running all examples and focused examples to avoid conflicts (CMD-d and CMD-i)
-* Added a TextMate snippet for custom matchers, lifted from Geoffrey Grosenbach's RSpec peepcode show.
-* The translator translates mock constraints to the new matchers that were introduced in 1.0.4
-* Documented environment variables for Spec::Rake::SpecTask. Renamed SPECOPTS and RCOVOPTS to SPEC_OPTS and RCOV_OPTS.
-* Fixed [#10534] Windows: undefined method 'controller_name'
-
-=== Version 1.0.5
-Bug fixes. Autotest plugin tweaks.
-
-* Fixed [#11378] fix to 10814 broke drb (re-opened #10814)
-* Fixed [#11223] Unable to access flash from rails helper specs
-* Fixed [#11337] autotest runs specs redundantly
-* Fixed [#11258] windows: autotest won't run
-* Applied [#11253] Tweaks to autotest file mappings (Patch from Wincent Colaiuta)
-* Applied [#11252] Should be able to re-load file containing shared behaviours without raising an exception (Patch from Wincent Colaiuta)
-* Fixed [#11247] standalone autotest doesn't work because of unneeded autotest.rb
-* Applied [#11221] Autotest support does not work w/o Rails Gem installed (Patch from Josh Knowles)
-
-=== Version 1.0.4
-The getting ready for JRuby release.
-
-* Fixed [#11181] behaviour_type scoping of config.before(:each) is not working
-* added mock argument constraint matchers (anything(), boolean(), an_instance_of(Type)) which work with rspec or mocha
-* added mock argument constraint matchers (any_args(), no_args()) which only work with rspec
-* deprecated rspec's symbol mock argument constraint matchers (:any_args, :no_args, :anything, :boolean, :numeric, :string)
-* Added tarball of rspec_on_rails to the release build to support folks working behind a firewall that blocks svn access.
-* Fixed [#11137] rspec incorrectly handles flash after resetting the session
-* Fixed [#11143] Views code for ActionController::Base#render broke between 1.0.0 and 1.0.3 on Rails Edge r6731
-* Added raise_controller_errors for controller examples in Spec::Rails
-
-=== Version 1.0.3
-Bug fixes.
-
-* Fixed [#11104] Website uses old specify notation
-* Applied [#11101] StringHelpers.starts_with?(prefix) assumes a string parameter for _prefix_
-* Removed 'rescue nil' which was hiding errors in controller examples.
-* Fixed [#11075] controller specs fail when using mocha without integrated_views
-* Fixed problem with redirect_to failing incorrectly against edge rails.
-* Fixed [#11082] RspecResourceGenerator should be RspecScaffoldGenerator
-* Fixed [#10959] Focused Examples do not work for Behaviour defined with constant with modules
-
-=== Version 1.0.2
-This is just to align the version numbers in rspec and rspec_on_rails.
-
-=== Version 1.0.1
-This is a maintenance release with mostly cleaning up, and one minor enhancement -
-Modules are automatically included when described directly.
-
-* Renamed Spec::Rails' rspec_resource generator to rspec_scaffold.
-* Removed Spec::Rails' be_feed matcher since it's based on assert_select_feed which is not part of Rails (despite that docs for assert_select_encoded says it is).
-* describe(SomeModule) will include that module in the examples. Like for Spec::Rails helpers, but now also in core.
-* Header in HTML report will be yellow instead of red if there is one failed example
-* Applied [#10951] Odd instance variable name in rspec_model template (patch from Kyle Hargraves)
-* Improved integration with autotest (Patches from Ryan Davis and David Goodland)
-* Some small fixes to make all specs run on JRuby.
-
-=== Version 1.0.0
-The stake in the ground release. This represents a commitment to the API as it is. No significant
-backwards compatibility changes in the API are expected after this release.
-
-* Fixed [#10923] have_text matcher does not support should_not
-* Fixed [#10673] should > and should >= broken
-* Applied [#10921] Allow verify_rcov to accept greater than threshold coverage %'s via configuration
-* Applied [#10920] Added support for not implemented examples (Patch from Chad Humphries and Ken Barker)
-* Patch to allow not implemented examples.  This works by not providing a block to the example. (Patch from Chad Humphries, Ken Barker)
-* Yanked support for Rails 1.1.6 in Spec::Rails
-* RSpec.tmbundle uses CMD-SHIFT-R to run focused examples now.
-* Spec::Rails now bundles a spec:rcov task by default (suggestion from Kurt Schrader)
-* Fixed [#10814] Runner loads shared code, test cases require them again
-* Fixed [#10753] Global before and after
-* Fixed [#10774] Allow before and after to be specified in config II
-* Refactored Spec::Ui examples to use new global before and after blocks.
-* Added instructions about how to get Selenium working with Spec::Ui (spec_ui/examples/selenium/README.txt)
-* Fixed [#10805] selenium.rb missing from gem?
-* Added rdocs explaining how to deal with errors in Rails' controller actions
-* Applied [#10770] Finer grained includes.
-* Fixed [#10747] Helper methods defined in shared specs are not visible when shared spec is used
-* Fixed [#10748] Shared descriptions in separate files causes 'already exists' error
-* Applied [#10698] Running with --drb executes specs twice (patch from Ruy Asan)
-* Fixed [#10871] 0.9.4 - Focussed spec runner fails to run specs in descriptions with type and string when there is no leading space in the string
-
-=== Version 0.9.4
-This release introduces massive improvements to Spec::Ui - the user interface functional testing
-extension to RSpec. There are also some minor bug fixes to the RSpec core.
-
-* Massive improvements to Spec::Ui. Complete support for all Watir's ie.xxx(how, what) methods. Inline screenshots and HTML.
-* Reactivated --timeout, which had mysteriously been deactivated in a recent release.
-* Fixed [#10669] Kernel#describe override does not cover Kernel#context
-* Applied [#10636] Added spec for OptionParser in Runner (Patch from Scott Taylor)
-* Added [#10516] should_include should be able to accept multiple items
-* Applied [#10631] redirect_to matcher doesn't respect request.host (Patch from Tim Lucas)
-* Each formatter now flushes their own IO. This is to avoid buffering of output.
-* Fixed [#10670] IVarProxy#delete raises exception when instance variable does not exist
-
-=== Version 0.9.3
-This is a bugfix release.
-
-* Fixed [#10594] Failing Custom Matcher show NAME NOT GENERATED description
-* describe(SomeType, "#message") will not add a space: "SomeType#message" (likewise for '.')
-* describe(SomeType, "message") will have a decription with a space: "SomeType message"
-* Applied [#10566] prepend_before and prepend_after callbacks
-* Applied [#10567] Call setup and teardown using before and after callbacks
-
-=== Version 0.9.2
-This is a quick maintenance release.
-
-* Added some website love
-* Fixed [#10542] reverse predicate matcher syntax
-* Added a spec:translate Rake task to make 0.9 translation easier with Spec:Rails
-* Better translation of should_redirect_to
-* Fixed --colour support for Windows. This is a regression that was introduced in 0.9.1
-* Applied [#10460] Make SpecRunner easier to instantiate without using commandline args
-
-=== Version 0.9.1
-
-This release introduces #describe and #it (aliased as #context and #specify for
-backwards compatibility). This allows you to express specs like this:
-
-  describe SomeClass do # Creates a Behaviour
-    it "should do something" do # Creates an Example
-    end
-  end
-
-The command line features four new options that give you more control over what specs
-are being run and in what order. This can be used to verify that your specs are
-independent (by running in opposite order with --reverse). It can also be used to cut
-down feedback time by running the most recently modified specs first (--loadby mtime --reverse).
-
-Further, --example replaces the old --spec option, and it can now take a file name of
-spec names as an alternative to just a spec name. The --format failing_examples:file.txt
-option allows you to output an --example compatible file, which makes it possible to only
-rerun the specs that failed in the last run. Spec::Rails uses all of these four options
-by default to optimise your RSpec experience.
-
-There is now a simple configuration model. For Spec::Rails, you do something like this:
-
-  Spec::Runner.configure do |config|
-    config.use_transactional_fixtures = true
-    config.use_instantiated_fixtures  = false
-    config.fixture_path = RAILS_ROOT + '/spec/fixtures'
-  end
-
-You can now use mocha or flexmock with RSpec if you prefer either to
-RSpec's own mock framework. Just put this:
-
-  Spec::Runner.configure do |config|
-    config.mock_with :mocha
-  end
-
-or this:
-
-  Spec::Runner.configure do |config|
-    config.mock_with :flexmock
-  end
-
-in a file that is loaded before your specs. You can also
-configure included modules and predicate_matchers:
-
-  Spec::Runner.configure do |config|
-    config.include SomeModule
-    config.predicate_matchers[:does_something?] = :do_something
-  end
-
-See Spec::DSL::Behaviour for more on predicate_matchers
-
-* Sugar FREE!
-* Added [10434 ] Please Make -s synonymous with -e for autotest compat. This is temporary until autotest uses -e instead of -s.
-* Fixed [#10133] custom predicate matchers
-* Applied [#10473] Add should exist (new matcher) - Patch from Bret Pettichord
-* Added another formatter: failing_behaviours. Writes the names of the failing behaviours for use with --example.
-* Applied [#10315] Patch to fix pre_commit bug 10313 - pre_commit_rails: doesn't always build correctly (Patch from Antii Tarvainen)
-* Applied [#10245] Patch to HTML escape the behavior name when using HTML Formatter (Patch from Josh Knowles)
-* Applied [#10410] redirect_to does not behave consistently with regards to query string parameter ordering (Patch from Nicholas Evans)
-* Applied [#9605] Patch for ER 9472, shared behaviour (Patch by Bob Cotton)
-* The '--format rdoc' option no longer causes a dry-run by default. --dry-run must be used explicitly.
-* It's possible to specify the output file in the --format option (See explanation in --help)
-* Several --format options may be specified to output several formats in one run.
-* The --out option is gone. Use --format html:path/to/my.html instead (or similar).
-* Spec::Runner::Formatter::BaseTextFormatter#initialize only takes one argument - an IO. dry_run and color are setters.
-* Made Spec::Ui *much* easier to install. It will be released separately. Check out trunk/spec_ui/examples
-* HTML reports now include a syntax highlighted snippet of the source code where the spec failed (needs the syntax gem)
-* Added [#10262] Better Helper testing of Erb evaluation block helpers
-* Added [#9735] support flexmock (thanks to Jim Weirich for his modifications to flexmock to support this)
-* Spec::Rails controller specs will no longer let mock exception ripple through to the response.
-* Fixed [#9260] IvarProxy does not act like a hash.
-* Applied [#9458] The rspec_scaffold generator does not take into account class nesting (Patch from Steve Tendon)
-* Applied [#9132] Rakefile spec:doc can fail without preparing database (Patch from Steve Ross)
-* Applied [#9678] Custom runner command line switch, and multi-threaded runner (Patch from Bob Cotton)
-* Applied [#9926] Rakefile - RSPEC_DEPS constant as an Array of Hashes instead of an Array of Arrays (Patch from Scott Taylor)
-* Applied [#9925] Changed ".rhtml" to "template" in REST spec generator (Patch from Scott Taylor)
-* Applied [#9852] Patch for RSpec's Website using Webgen 0.4.2 (Patch from Scott Taylor)
-* Fixed [#6523] Run rspec on rails without a db
-* Fixed [#9295] rake spec should run anything in the spec directory (not just rspec's standard dirs)
-* Added [#9786] infer controller and helper names from the described type
-* Fixed [#7795] form_tag renders action='/view_spec' in view specs
-* Fixed [#9767] rspec_on_rails should not define rescue_action on controllers
-* Fixed [#9421] --line doesn't work with behaviours that use class names
-* Fixed [#9760] rspec generators incompatible with changes to edge rails
-* Added [#9786] infer controller and helper names from the described type
-* Applied a simplified version of [#9282] Change to allow running specs from textmate with rspec installed as a rails plugin (and no rspec gem installed)
-* Applied [#9700] Make Spec::DSL::Example#name public / Add a --timeout switch. A great way to prevent specs from getting slow.
-* In Rails, script/generate rspec will generate a spec.opts file that optimises faster/more efficient running of specs.
-* Added [#9522] support using rspec's expectations with test/unit
-* Moved rspec_on_rails up to the project root, simplifying the download url
-* Fixed [#8103] RSpec not installing spec script correctly.
-* The --spec option is replaced by the --example option.
-* The --loadby option no longer supports a file argument. Use --example file_name instead.
-* The --example option can now take a file name as an argument. The file should contain example names.
-* Internal classes are named Behaviour/Example (rather than Context/Specification).
-* You can now use mocha by saying config.mock_with :mocha in a spec_helper
-* before_context_eval is replaced by before_eval.
-* Applied [#9509] allow spaced options in spec.opts
-* Applied [#9510] Added File for Ruby 1.8.6
-* Applied [#9511] Clarification to README file in spec/
-* Moved all of the Spec::Rails specs down to the plugins directory - now you can run the specs after you install.
-* Updated RSpec.tmbundle to the 0.9 syntax and replaced context/specify with describe/it.
-* Applied [#9232] ActionController::Base#render is sometimes protected (patch from Dan Manges)
-* Added --reverse option, allowing contexts/specs to be run in reverse order.
-* Added --loadby option, allowing better control over load order for spec files. mtime and file.txt supported.
-* Implemented [#8696] --order option (see --reverse and --loadby)
-* Added describe/it as aliases for context/specify - suggestion from Dan North.
-* Applied [#7637] [PATCH] add skip-migration option to rspec_scaffold generator
-* Added [#9167] string.should have_tag
-* Changed script/rails_spec_server to script/spec_server and added script/spec (w/ path to vendor/plugins/rspec)
-* Fixed [#8897] Error when mixing controller spec with/without integrated views and using template system other than rhtml
-* Updated sample app specs to 0.9 syntax
-* Updated generated specs to 0.9 syntax
-* Applied [#8994] trunk: generated names for be_ specs (Multiple patches from Yurii Rashkovskii)
-* Applied [#9983]: Allow before and after to be called in BehaviourEval. This is useful for shared examples.
-
-=== Version 0.8.2
-
-Replaced assert_select fork with an assert_select wrapper for have_tag. This means that "should have_rjs" no longer supports :hide or :effect, but you can still use should_have_rjs for those.
-
-=== Version 0.8.1
-
-Quick "in house" bug-fix
-
-=== Version 0.8.0
-
-This release introduces a new approach to handling expectations using Expression Matchers.
-
-See Upgrade[http://rspec.rubyforge.org/upgrade.html], Spec::Expectations, Spec::Matchers and RELEASE-PLAN for more info.
-
-This release also improves the spec command line by adding DRb support and making it possible to
-store command line options in a file. This means a more flexible RSpec experience with Rails,
-Rake and editor plugins like TextMate.
-
-It also sports myriad new features, bug fixes, patches and general goodness:
-
-* Fixed [#8928] rspec_on_rails 0.8.0-RC1 controller tests make double call to setup_with_fixtures
-* Fixed [#8925] Documentation bug in 0.8.0RC1 rspec website
-* Applied [#8132] [PATCH] RSpec breaks "rake db:sessions:create" in a rails project that has the rspec_on_rails plugin (Patch from Erik Kastner)
-* Fixed [#8789] --line and --spec not working when the context has parenhesis in the name
-* Added [#8783] auto generate spec names from last expectation
-* --heckle now fails if the heckled class or module is not found.
-* Fixed [#8771] Spec::Mocks::BaseExpectation#with converts hash params to array of arrays with #collect
-* Fixed [#8750] should[_not]_include backwards compatibility between 0.8.0-RC1 and 0.7.5.1 broken
-* Fixed [#8646] Context Runner does not report on Non standard exceptions and return a 0 return code
-* RSpec on Rails' spec_helper.rb will only force RAILS_ENV to test if it was not specified on the command line.
-* Fixed [#5485] proc#should_raise and proc#should_not_raise output
-* Added [#8484] should_receive with blocks
-* Applied [#8218] heckle_runner.rb doesn't work with heckle >= 1.2.0 (Patch from Michal Kwiatkowski)
-* Fixed [#8240] Cryptic error message when no controller_name
-* Applied [#7461] [PATCH] Contexts don't call Module::included when they include a module
-* Removed unintended block of test/unit assertions in rspec_on_rails - they should all, in theory, now be accessible
-* Added mock_model method to RSpec on Rails, which stubs common methods. Based on http://metaclass.org/2006/12/22/making-a-mockery-of-activerecord
-* Fixed [#8165] Partial Mock Errors when respond_to? is true but the method is not in the object
-* Fixed [#7611] Partial Mocks override Subclass methods
-* Fixed [#8302] Strange side effect when mocking a class method
-* Applied [#8316] to_param should return a stringified key in resource generator's controller spec (Patch from Chris Anderson)
-* Applied [#8216] shortcut for creating object stub
-* Applied [#8008] Correct generated specs for view when calling resource generator (Patch from Jonathan Tron)
-* Fixed [#7754] Command-R fails to run spec in TextMate (added instruction from Luke Redpath to the website)
-* Fixed [#7826] RSpect.tmbundle web page out of date.
-* RSpec on Rails specs are now running against RoR 1.2.1 and 1.2.2
-* rspec_scaffold now generates specs for views
-* In a Rails app, RSpec core is only loaded when RAILS_ENV==test (init.rb)
-* Added support for target.should arbitrary_expectation_handler and target.should_not arbitrary_expectation_handler
-* Fixed [#7533] Spec suite fails and the process exits with a code 0
-* Fixed [#7565] Subsequent stub! calls for method fail to override the first call to method
-* Applied [#7524] Incorrect Documentation for 'pattern' in Rake task (patch from Stephen Duncan)
-* Fixed [#7409] default fixtures do not appear to run.
-* Fixed [#7507] "render..and return" doesn't return
-* Fixed [#7509] rcov/rspec incorrectly includes boot.rb (Patch from Courtenay)
-* Fixed [#7506] unnecessary complex output on failure of response.should be_redirect
-* Applied [#6098] Make scaffold_resource generator. Based on code from Pat Maddox.
-* The drbspec command is gone. Use spec --drb instead.
-* The drb option is gone from the Rake task. Pass --drb to spec_opts instead.
-* New -X/--drb option for running specs against a server like spec/rails' script/rails_spec_server
-* New -O/--options and -G/--generate flags for file-based options (handy for spec/rails)
-* Applied [#7339] Turn off caching in HTML reports
-* Applied [#7419] "c option for colorizing output does not work with rails_spec" (Patch from Shintaro Kakutani)
-* Applied [#7406] [PATCH] 0.7.5 rspec_on_rails loads fixtures into development database (Patch from Wilson Bilkovich)
-* Applied [#7387] Allow stubs to return consecutive values (Patch from Pat Maddox)
-* Applied [#7393] Fix for rake task (Patch from Pat Maddox)
-* Reinstated support for response.should_render (in addition to controller.should_render)
-
-=== Version 0.7.5.1
-
-Bug fix release to allow downloads of rspec gem using rubygems 0.9.1.
-
-=== Version 0.7.5
-This release adds support for Heckle - Seattle'rb's code mutation tool.
-There are also several bug fixes to the RSpec core and the RSpec on Rails plugin.
-
-* Removed svn:externals on rails versions and plugins
-* Applied [#7345] Adding context_setup and context_teardown, with specs and 100% rcov
-* Applied [#7320] [PATCH] Allow XHR requests in controller specs to render RJS templates
-* Applied [#7319] Migration code uses drop_column when it should use remove_column (patch from Pat Maddox)
-* Added support for Heckle
-* Applied [#7282] dump results even if spec is interrupted (patch from Kouhei Sutou)
-* Applied [#7277] model.should_have(n).errors_on(:attribute) (patch from Wilson Bilkovich)
-* Applied [#7270] RSpec render_partial colliding with simply_helpful (patch from David Goodlad)
-* Added [#7250] stubs should support throwing
-* Added [#7249] stubs should support yielding
-* Fixed [#6760] fatal error when accessing nested finders in rspec
-* Fixed [#7179] script/generate rspec_scaffold generates incorrect helper name
-* Added preliminary support for assert_select (response.should_have)
-* Fixed [#6971] and_yield does not work when the arity is -1
-* Fixed [#6898] Can we separate rspec from the plugins?
-* Added [#7025] should_change should accept a block
-* Applied [#6989] partials with locals (patch from Micah Martin)
-* Applied [#7023] Typo in team.page
-
-=== Version 0.7.4
-
-This release features a complete redesign of the reports generated with --format html.
-As usual there are many bug fixes - mostly related to spec/rails.
-
-* Applied [#7010] Fixes :spacer_template does not work w/ view spec (patch from Shintaro Kakutani)
-* Applied [#6798] ensure two ':' in the first backtrace line for Emacs's 'next-error' command (patch from Kouhei Sutou)
-* Added Much nicer reports to generated website
-* Much nicer reports with --format --html (patch from Luke Redpath)
-* Applied [#6959] Calls to render and redirect in controllers should return true
-* Fixed [#6981] helper method is not available in partial template.
-* Added [#6978] mock should tell you the expected and actual args when receiving the right message with the wrong args
-* Added the possibility to tweak the output of the HtmlFormatter (by overriding extra_failure_content).
-* Fixed [#6936] View specs don't include ApplicationHelper by default
-* Fixed [#6903] Rendering a partial in a view makes the view spec blow up
-* Added callback library from Brian Takita
-* Added [#6925] support controller.should_render :action_name
-* Fixed [#6884] intermittent errors related to method binding
-* Fixed [#6870] rspec on edge rails spec:controller fixture loading fails
-* Using obj.inspect for all messages
-* Improved performance by getting rid of instance_exec (instance_eval is good enough because we never need to pass it args)
-
-=== Version 0.7.3
-
-Almost normal bug fix/new feature release.
-
-A couple of things you need to change in your rails specs:
-# spec_helper.rb is a little different (see http://rspec.rubyforge.org/upgrade.html)
-# use controller.should_render before OR after the action (controller.should_have_rendered is deprecated)
-
-* Applied [#6577] messy mock backtrace when frozen to edge rails (patch from Jay Levitt)
-* Fixed [#6674] rspec_on_rails fails on @session deprecation warning
-* Fixed [#6780] routing() was failing...fix included - works for 1.1.6 and edge (1.2)
-* Fixed [#6835] bad message with arbitrary predicate
-* Added [#6731] Partial templates rendered
-* Fixed [#6713] helper methods not rendered in view tests?
-* Fixed [#6707] cannot run controller / helper tests via rails_spec or spec only works with rake
-* Applied [#6417] lambda {...}.should_change(receiver, :message) (patch from Wilson Bilkovich)
-* Eliminated dependency on ZenTest
-* Fixed [#6650] Reserved characters in the TextMate bundle break svn on Win32
-* Fixed [#6643] script/generate rspec_controller: invalid symbol generation for 'controller_name' for *modularized* controllers
-* The script/rails_spec command has been moved to bin/drbspec in RSpec core (installed by the gem)
-
-=== Version 0.7.2
-
-This release introduces a brand new RSpec bundle for TextMate, plus some small bugfixes.
-
-* Packaged RSpec.tmbundle.tgz as part of the distro
-* Fixed [#6593] Add moving progress bar to HtmlFormatter using Javascript
-* Applied [#6265] should_raise should accept an Exception object
-* Fixed [#6616] Can't run Rails specs with RSpec.tmbundle
-* Fixed [#6411] Can't run Rails specs with ruby
-* Added [#6589] New -l --line option. This is useful for IDE/editor runners/extensions.
-* Fixed [#6615] controller.should_render_rjs should support :partial => 'path/to/template'
-
-=== Version 0.7.1
-
-Bug fixes and a couple o' new features.
-
-* Fixed [#6575] Parse error in aliasing the partial mock original method (patch by Brian Takita)
-* Fixed [#6277] debris left by stubbing (trunk) [submitted by dastels] (fixed by fix to [#6575])
-* Fixed [#6575] Parse error in aliasing the partial mock original method
-* Fixed [#6555] should_have_tag does not match documentation
-* Fixed [#6567] SyntaxError should not stop entire run
-* Fixed [#6558] integrated views look for template even when redirected
-* Fixed [#6547] response.should be_redirect broken in 0.7.0
-* Applied [#6471] Easy way to spec routes
-* Applied [#6587] Rspec on Rails displays "Spec::Rails::ContextFactory" as context name
-* Applied [#6514] Document has trivial typos.
-* Added [#6560] controller.session should be available before the action
-* Added support for should_have_rjs :visual_effect
-* Different printing and colours for unmet expectations (red) and other exceptions (magenta)
-* Simplified method_missing on mock_methods to make it less invasive on partial mocks.
-
-=== Version 0.7.0
-
-This is the "Grow up and eat your own dog food release". RSpec is now used on itself and
-we're no longer using Test::Unit to test it. Although, we are still extending Test::Unit
-for the rails plugin (indirectly - through ZenTest)
-
-IMPORTANT NOTE: THIS RELEASE IS NOT 100% BACKWARDS COMPATIBLE TO 0.6.x
-
-There are a few changes that will require that you change your existing specs.
-
-RSpec now handles equality exactly like ruby does:
-
-# actual.should_equal(expected) will pass if actual.equal?(expected) returns true
-# actual.should eql(expected) will pass if actual.eql?(expected) returns true
-# actual.should == expected will pass if actual == expected) returns true
-
-At the high level, eql? implies equivalence, while equal? implies object identity. For more
-information on how ruby deals w/ equality, you should do this:
-
-ri equal?
-
-or look at this:
-
-http://www.ruby-doc.org/core/classes/Object.html#M001057
-
-Also, we left in should_be as a synonym for should_equal, so the only specs that should break are the
-ones using should_equal (which used to use <code>==</code> instead of <code>.equal?</code>).
-
-Lastly, should_be used to handle true and false differently from any other values. We've removed
-this special handling, so now actual.should_be true will fail for any value other than true (it
-used to pass for any non-nil, non-false value), and actual.should_be false will fail for any
-value other than false (it used to pass for nil or false).
-
-Here's what you'll need to do to update your specs:
-# search for "should_equal" and replace with "should_eql"
-# run specs
-
-If any specs still fail, they are probably related to should be_true or should_be_false using
-non-boolean values. Those you'll just have to inspect manually and adjust appropriately (sorry!).
-
---------------------------------------------------
-Specifying multiple return values in mocks now works like this:
-
-mock.should_receive(:message).and_return(1,2,3)
-
-It used to work like this:
-
-mock.should_receive(:message).and_return([1,2,3])
-
-but we decided that was counter intuitive and otherwise lame.
-
-Here's what you'll need to do to update your specs:
-# search for "and_return(["
-# get rid of the "[" and "]"
-
---------------------------------------------------
-RSpec on Rails now supports the following (thanks to ZenTest upon which it is built):
-
-# Separate specs for models, views, controllers and helpers
-# Controller specs are completely decoupled from the views by default (though you can tell them to couple themselves if you prefer)
-# View specs are completely decoupled from app-specific controllers
-
-See http://rspec.rubyforge.org/documentation/rails/index.html for more information
---------------------------------------------------
-As usual, there are also other new features and bug fixes:
-
-* Added lots of documentation on mocks/stubs and the rails plugin.
-* Added support for assigns[key] syntax for controller specs (to align w/ pre-existing syntax for view specs)
-* Added support for controller.should_redirect_to
-* RSpec on Rails automatically checks whether it's compatible with the installed RSpec
-* Applied [#6393] rspec_on_rails uses deprecated '@response' instead of the accessor
-* RSpec now has 100% spec coverage(!)
-* Added support for stubbing and partial mocking
-* Progress (....F..F.) is now coloured. Tweaked patch from KAKUTANI Shintaro.
-* Backtrace now excludes the rcov runner (/usr/local/bin/rcov)
-* Fixed [#5539] predicates do not work w/ rails
-* Added [#6091] support for Regexp matching messages sent to should_raise
-* Added [#6333] support for Regexp matching in mock arguments
-* Applied [#6283] refactoring of diff support to allow selectable formats and custom differs
-* Fixed [#5564] "ruby spec_file.rb" doesn't work the same way as "spec spec_file.rb"
-* Fixed [#6056] Multiple output of failing-spec notice
-* Fixed [#6233] Colours in specdoc
-* Applied [#6207] Allows --diff option to diff target and expected's #inspect output (Patch by Lachie Cox)
-* Fixed [#6203] Failure messages are misleading - consider using inspect.
-* Added [#6334] subject.should_have_xyz will try to call subject.has_xyz? - use this for hash.should_have_key(key)
-* Fixed [#6017] Rake task should ignore empty or non-existent spec-dirs
-
-=== Version 0.6.4
-
-In addition to a number of bug fixes and patches, this release begins to formalize the support for
-RSpec on Rails.
-
-* Added Christopher Petrilli's TextMate bundle to vendor/textmate/RSpec.tmbundle
-* Fixed [#5909], once again supporting multi_word_predicates
-* Applied [#5873] - response.should_have_rjs (initial patch from Jake Howerton, based on ARTS by Kevin Clark)
-* Added generation of view specs for rspec_on_rails
-* Applied [#5815] active_record_subclass.should_have(3).records
-* Added support in "rake stats" for view specs (in spec/views)
-* Applied [#5801] QuickRef.pdf should say RSpec, not rSpec
-* Applied [#5728] rails_spec_runner fails on Windows (Patch from Lindsay Evans).
-* Applied [#5708] RSpec Rails plugin rspec_controller generator makes specs that do not parse.
-* Cleaned up RSpec on Rails so it doesn't pollute as much during bootstrapping.
-* Added support for response.should_have_tag and response.should_not_have_tag (works just like assert_tag in rails)
-* Added new -c, --colour, --color option for colourful (red/green) output. Inspired from Pat Eyler's Redgreen gem.
-* Added examples for Watir and Selenium under the gem's vendor directory.
-* Renamed rails_spec_runner to rails_spec_server (as referred to in the docs)
-* Added support for trying a plural for arbitrary predicates.  E.g. Album.should_exist(:name => "Hey Jude") will call Album.exists?(:name => "Hey Jude")
-* Added support for should_have to work with methods taking args returning a collection.  E.g. @dave.should_have(3).albums_i_have_that_this_guy_doesnt(@aslak)
-* Added [#5570] should_not_receive(:msg).with(:specific, "args")
-* Applied [#5065] to support using define_method rather than method_missing to capture expected messages on mocks. Thanks to Eero Saynatkari for the tip that made it work.
-* Restructured directories and Modules in order to separate rspec into three distinct Modules: Spec::Expectations, Spec::Runner and Spec::Mocks. This will allow us to more easily integrate other mock frameworks and/or allow test/unit users to take advantage of the expectation API.
-* Applied [#5620] support any boolean method and arbitrary comparisons (5.should_be < 6) (Patch from Mike Williams)
-
-=== Version 0.6.3
-
-This release fixes some minor bugs related to RSpec on Rails
-Note that if you upgrade a rails app with this version of the rspec_on_rails plugin
-you should remove your lib/tasks/rspec.rake if it exists.
-
-* Backtraces from drb (and other standard ruby libraries) are now stripped from backtraces.
-* Applied [#5557] Put rspec.rake into the task directory of the RSpec on Rails plugin (Patch from Daniel Siemssen)
-* Applied [#5556] rails_spec_server loads environment.rb twice (Patch from Daniel Siemssen)
-
-=== Version 0.6.2
-This release fixes a couple of regressions with the rake task that were introduced in the previous version (0.6.1)
-
-* Fixed [#5518] ruby -w: warnings in 0.6.1
-* Applied [#5525] fix rake task path to spec tool for gem-installed rspec (patch from Riley Lynch)
-* Fixed a teensey regression with the rake task - introduced in 0.6.1. The spec command is now quoted so it works on windows.
-
-=== Version 0.6.1
-This is the "fix the most annoying bugs release" of RSpec. There are 9 bugfixes this time.
-Things that may break backwards compatibility:
-1) Spec::Rake::SpecTask no longer has the options attribute. Use ruby_opts, spec_opts and rcov_opts instead.
-
-* Fixed [#4891] RCOV task failing on windows
-* Fixed [#4896] Shouldn't modify user's $LOAD_PATH (Tip from Gavin Sinclair)
-* Fixed [#5369] ruby -w: warnings in RSpec 0.5.16 (Tip from Suraj Kurapati)
-* Applied [#5141] ExampleMatcher doesn't escape strings before matching (Patch from Nikolai Weibull).
-* Fixed [#5224] Move 'require diff-lcs' from test_helper.rb to diff_test.rb (Tip from Chris Roos)
-* Applied [#5449] Rake stats for specs (Patch from Nick Sieger)
-* Applied [#5468, #5058] Fix spec runner to correctly run controller specs (Patch from Daniel Siemssen)
-* Applied fixes to rails_spec_server to improve its ability to run several times. (Patch from Daniel Siemssen)
-* Changed RCov::VerifyTask to fail if the coverage is above the threshold. This is to ensure it gets bumped when coverage improves.
-
-=== Version 0.6.0
-This release makes an official commitment to underscore_syntax (with no more support for dot.syntax)
-
-* Fixed bug (5292) that caused mock argument matching to fail
-* Converted ALL tests to use underscore syntax
-* Fixed all remaining problems with underscores revealed by converting all the tests to underscores
-* Enhanced sugar to support combinations of methods (i.e. once.and_return)
-* Simplified helper structure taking advantage of dot/underscore combos (i.e. should.be.an_instance_of, which can be expressed as should be_an_instance_of)
-* Added support for at_most in mocks
-* Added support for should_not_receive(:msg) (will be removing should_receive(:msg).never some time soon)
-* Added support for should_have_exactly(5).items_in_collection
-
-=== Version 0.5.16
-This release improves Rails support and test2spec translation.
-
-* Fixed underscore problems that occurred when RSpec was used in Rails
-* Simplified the Rails support by packaging it as a plugin instead of a generator gem.
-* Fixed [#5063] 'rspec_on_rails' require line in spec_helper.rb
-* Added pre_commit rake task to reduce risk of regressions. Useful for RSpec developers and patchers.
-* Added failure_message to RSpec Rake task
-* test2spec now defines converted helper methods outside of the setup block (bug #5057).
-
-=== Version 0.5.15
-This release removes a prematurely added feature that shouldn't have been added.
-
-* Removed support for differences that was added in 0.5.14. The functionality is not aligned with RSpec's vision.
-
-=== Version 0.5.14
-This release introduces better ways to extend specs, improves some of the core API and
-a experimental support for faster rails specs.
-
-* Added proc methods for specifying differences (increments and decrements). See difference_test.rb
-* Methods can now be defined alongside specs. This obsoletes the need for defining methods in setup. (Patch #5002 from Brian Takita)
-* Sugar (underscores) now works correctly with should be_a_kind_of and should be_an_instance_of
-* Added support for include and inherit in contexts. (Patch #4971 from Brian Takita)
-* Added rails_spec and rails_spec_server for faster specs on rails (still buggy - help needed)
-* Fixed bug that caused should_render to break if given a :symbol (in Rails)
-* Added support for comparing exception message in should_raise and should_not_raise
-
-=== Version 0.5.13
-This release fixes some subtle bugs in the mock API.
-
-* Use fully-qualified class name of Exceptions in failure message. Easier to debug that way.
-* Fixed a bug that caused mocks to yield a one-element array (rather than the element) when one yield arg specified.
-* Mocks not raise AmbiguousReturnError if an explicit return is used at the same time as an expectation block.
-* Blocks passed to yielding mocks can now raise without causing mock verification to fail.
-
-=== Version 0.5.12
-This release adds diff support for failure messages, a HTML formatter plus some other
-minor enhancements.
-
-* Added HTML formatter.
-* Added fail_on_error option to spectask.
-* Added support for diffing, using the diff-lcs Rubygem (#2648).
-* Remove RSpec on Rails files from backtrace (#4694).
-* All of RSpec's own tests run successfully after translation with test2spec.
-* Added --verbose mode for test2spec - useful for debugging when classes fail to translate.
-* Output of various formatters is now flushed - to get more continuous output.
-
-=== Version 0.5.11
-This release makes test2spec usable with Rails (with some manual steps).
-See http://rspec.rubyforge.org/tools/rails.html for more details
-
-* test2spec now correctly translates bodies of helper methods (non- test_*, setup and teardown ones).
-* Added more documentation about how to get test2spec to work with Rails.
-
-=== Version 0.5.10
-This version features a second rewrite of test2spec - hopefully better than the previous one.
-
-* Improved test2spec's internals. It now transforms the syntax tree before writing out the code.
-
-=== Version 0.5.9
-This release improves test2spec by allowing more control over the output
-
-* Added --template option to test2spec, which allows for custom output driven by ERB
-* Added --quiet option to test2spec
-* Removed unnecessary dependency on RubyToC
-
-=== Version 0.5.8
-This release features a new Test::Unit to RSpec translation tool.
-Also note that the RubyGem of the previous release (0.5.7) was corrupt.
-We're close to being able to translate all of RSpec's own Test::Unit
-tests and have them run successfully!
-
-* Updated test2spec documentation.
-* Replaced old test2rspec with a new test2spec, which is based on ParseTree and RubyInline.
-
-=== Version 0.5.7
-This release changes examples and documentation to recommend underscores rather than dots,
-and addresses some bugfixes and changes to the spec commandline.
-
-* spec DIR now works correctly, recursing down and slurping all *.rb files
-* All documentation and examples are now using '_' instead of '.'
-* Custom external formatters can now be specified via --require and --format.
-
-=== Version 0.5.6
-This release fixes a bug in the Rails controller generator
-
-* The controller generator did not write correct source code (missing 'do'). Fixed.
-
-=== Version 0.5.5
-This release adds initial support for Ruby on Rails in the rspec_generator gem.
-
-* [Rails] Reorganised Lachie's original code to be a generator packaged as a gem rather than a plugin.
-* [Rails] Imported code from http://lachie.info/svn/projects/rails_plugins/rspec_on_rails (Written by Lachie Cox)
-* Remove stack trace lines from TextMate's Ruby bundle
-* Better error message from spectask when no spec files are found.
-
-=== Version 0.5.4
-The "the tutorial is ahead of the gem" release
-
-* Support for running a single spec with --spec
-* Exitcode is now 1 unless all specs pass, in which case it's 0.
-* -v, --version now both mean the same thing
-* For what was verbose output (-v), use --format specdoc or -f s
-* --format rdoc always runs in dry-run mode
-* Removed --doc and added --format and --dry-run
-* Refactored towards more pluggable formatters
-* Use webgen's execute tag when generating website (more accurate)
-* Fixed incorrect quoting of spec_opts in SpecTask
-* Added patch to enable underscored shoulds like 1.should_equal(1) - patch from Rich Kilmer
-* Removed most inherited instance method from Mock, making more methods mockable.
-* Made the RCovVerify task part of the standard toolset.
-* Documented Rake task and how to use it with Rcov
-* Implemented <ruby></ruby> tags for website (hooking into ERB, RedCloth and syntax)
-* RSpec Rake task now takes spec_opts and out params so it can be used for doc generation
-* RCov integration for RSpec Rake task (#4058)
-* Group all results instead of printing them several times (#4057)
-* Mocks can now yield
-* Various improvements to error reporting (including #4191)
-* backtrace excludes rspec code - use -b to include it
-* split examples into examples (passing) and failing_examples
-
-=== Version 0.5.3
-The "hurry up, CoR is in two days" release.
-
-* Don't run rcov by default
-* Make separate task for running tests with RCov
-* Added Rake task to fail build if coverage drops below a certain threshold
-* Even more failure output cleanup (simplification)
-* Added duck_type constraint for mocks
-
-=== Version 0.5.2
-This release has minor improvements to the commandline and fixes some gem warnings
-
-* Readded README to avoid RDoc warnings
-* Added --version switch to commandline
-* More changes to the mock API
-
-=== Version 0.5.1
-This release is the first release of RSpec with a new website. It will look better soon.
-
-* Added initial documentation for API
-* Added website based on webgen
-* Modified test task to use rcov
-* Deleted unused code (thanks, rcov!)
-* Various changes to the mock API,
-* Various improvements to failure reporting
-
-=== Version 0.5.0
-This release introduces a new API and obsolesces previous versions.
-
-* Moved source code to separate subfolders
-* Added new DSL runner based on instance_exec
-* Added spike for testdox/rdoc generation
-* merge Astels' and Chelimsky's work on ShouldHelper
-* this would be 0.5.0 if I updated the documentation
-* it breaks all of your existing specifications.  We're not sorry.
-
-=== Version 0.3.2
-
-The "srbaker is an idiot" release.
-
-* also forgot to update the path to the actual Subversion repository
-* this should be it
-
-=== Version 0.3.1
-
-This is just 0.3.0, but with the TUTORIAL added to the documentation list.
-
-* forgot to include TUTORIAL in the documentation
-
-=== Version 0.3.0
-
-It's been a while since last release, lots of new stuff is available.  For instance:
-
-* improvements to the runners
-* addition of should_raise expectation (thanks to Brian Takita)
-* some documentation improvements
-* RSpec usable as a DSL
-
-=== Version 0.2.0
-
-This release provides a tutorial for new users wishing to get started with
-RSpec, and many improvements.
-
-* improved reporting in the spec runner output
-* update the examples to the new mock api
-* added TUTORIAL, a getting started document for new users of RSpec
-
-=== Version 0.1.7
-
-This release improves installation and documentation, mock integration and error reporting.
-
-* Comparison errors now print the class name too.
-* Mocks now take an optional +options+ parameter to specify behaviour.
-* Removed __expects in favour of should_receive
-* Added line number reporting in mock error messages for unreceived message expectations.
-* Added should_match and should_not_match.
-* Added a +mock+ method to Spec::Context which will create mocks that autoverify (no need to call __verify).
-* Mocks now require names in the constructor to ensure sensible error messages.
-* Made 'spec' executable and updated usage instructions in README accordingly.
-* Made more parts of the Spec::Context API private to avoid accidental usage.
-* Added more RDoc to Spec::Context.
-
-=== Version 0.1.6
-
-More should methods.
-
-* Added should_match and should_not_match.
-
-=== Version 0.1.5
-
-Included examples and tests in gem.
-
-=== Version 0.1.4
-
-More tests on block based Mock expectations.
-
-=== Version 0.1.3
-
-Improved mocking:
-
-* block based Mock expectations.
-
-=== Version 0.1.2
-
-This release adds some improvements to the mock API and minor syntax improvements
-
-* Added Mock.should_expect for a more consistent DSL.
-* Added MockExpectation.and_returns for a better DSL.
-* Made Mock behave as a null object after a call to Mock.ignore_missing
-* Internal syntax improvements.
-* Improved exception trace by adding exception class name to error message.
-* Renamed some tests for better consistency.
-
-=== Version 0.1.1
-
-This release adds some shoulds and improves error reporting
-
-* Added should be_same_as and should_not be_same_as.
-* Improved error reporting for comparison expectations.
-
-=== Version 0.1.0
-
-This is the first preview release of RSpec, a Behaviour-Driven Development library for Ruby
-
-* Added Rake script with tasks for gems, rdoc etc.
-* Added an XForge task to make release go easier.