mayday 0.1.0 → 0.1.1

checksums.yaml

@@ -1,7 +1,7 @@
 ---
 SHA1:
-  metadata.gz: bead9398a12d7fac991556b67b4af793675ef6a0
-  data.tar.gz: 7627a3a3648e2c8655a70df4d3e0856f05b3a6fc
+  metadata.gz: 528e45a5424cea26dc7661b18baa77c21989e5a0
+  data.tar.gz: f2191fb65a8b7de70a7ef74b5bee6622dfe07818
 SHA512:
-  metadata.gz: 473733c6f78fa151001c7517f6fe271a3f142978ec8239802b645653461794dbeab2e5a4ab77d34b29d869c75fab30f1ca630aad6d69b21e3ebd3d1bb4267951
-  data.tar.gz: 424758711041f7e6ed420077a2f941eb6f2106e775d4af2f9ef98cc906759184dde684c03520e82e2a91830dc7006b0896610a50bea4ed2a737d495ece8af776
+  metadata.gz: f18702d705d8456491604b27e208cdebafa6fc64b7237ca44065516350c198dac4153acf62043d2ed94cdeeefedb547cbfe6d62608c61a13551c0dab7fc2301d
+  data.tar.gz: 8124aa4272be0943a239c97e7a54fe3ddddd6318fdbaf4492b4b87c8ef90cf384f1596806e80d465ad6c7f1d1fc57c898a9bad450b61534c132cbadeed5ef7be

data/README.md

@@ -88,9 +88,9 @@ $ mayday benchmark
 
 ## Caveats
 
-* `mayday` uses [sourcify]() to write your custom `warning` and `errors` blocks to a build phase, all [gotchas in sourcify](https://github.com/ngty/sourcify#gotchas) apply to your blocks.
+* `mayday` uses [sourcify](https://github.com/ngty/sourcify) to write your custom `warning` and `errors` blocks to a build phase, all [gotchas in sourcify](https://github.com/ngty/sourcify#gotchas) apply to your blocks.
 * `mayday` copies your custom blocks, line for line, into a build phase, so all variables inside of them must be of local scope. Anything defined outside of a custom block will not be included in the build phase.
-* Gems cannot but used inside of custom blocks, only vanilla, system Ruby.
+* Gems cannot be used inside of custom blocks, only vanilla, system Ruby.
 * If your custom blocks have errors in them that aren't found until they're executed (which is done whenever you call `mayday`), the stack trace won't be very helpful in debugging (because there is no source map from the build phase back to your `Maydayfile` code)
 * Generating efficient code to write into the build phase is difficult. The code generated by `MayDay::ScriptGenerator#to_ruby` could definitely be optimized.
 

data/lib/mayday/version.rb

@@ -1,3 +1,3 @@
 module Mayday
-  VERSION = "0.1.0"
+  VERSION = "0.1.1"
 end

data/mayday.gemspec

@@ -24,7 +24,7 @@ Gem::Specification.new do |spec|
   spec.add_development_dependency "rspec", "~> 2.14"
 
   spec.add_dependency 'clamp', '~> 0.6.3'
-  spec.add_dependency 'colored', '~> 1.2'
+  spec.add_dependency 'colorize', '~> 0.7.3'
   spec.add_dependency 'sourcify', '~> 0.6.0rc4'
   spec.add_dependency 'xcodeproj', '~> 0.19.3'
 end

data/spec/fixtures/Fixtures/Fixtures.xcodeproj/xcshareddata/xcschemes/Fixtures.xcscheme

@@ -0,0 +1,110 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<Scheme
+   LastUpgradeVersion = "0600"
+   version = "1.3">
+   <BuildAction
+      parallelizeBuildables = "YES"
+      buildImplicitDependencies = "YES">
+      <BuildActionEntries>
+         <BuildActionEntry
+            buildForTesting = "YES"
+            buildForRunning = "YES"
+            buildForProfiling = "YES"
+            buildForArchiving = "YES"
+            buildForAnalyzing = "YES">
+            <BuildableReference
+               BuildableIdentifier = "primary"
+               BlueprintIdentifier = "8C45AC0819EF97EB00D0B22A"
+               BuildableName = "Fixtures.app"
+               BlueprintName = "Fixtures"
+               ReferencedContainer = "container:Fixtures.xcodeproj">
+            </BuildableReference>
+         </BuildActionEntry>
+         <BuildActionEntry
+            buildForTesting = "YES"
+            buildForRunning = "YES"
+            buildForProfiling = "NO"
+            buildForArchiving = "NO"
+            buildForAnalyzing = "YES">
+            <BuildableReference
+               BuildableIdentifier = "primary"
+               BlueprintIdentifier = "8C45AC1D19EF97EB00D0B22A"
+               BuildableName = "FixturesTests.xctest"
+               BlueprintName = "FixturesTests"
+               ReferencedContainer = "container:Fixtures.xcodeproj">
+            </BuildableReference>
+         </BuildActionEntry>
+      </BuildActionEntries>
+   </BuildAction>
+   <TestAction
+      selectedDebuggerIdentifier = "Xcode.DebuggerFoundation.Debugger.LLDB"
+      selectedLauncherIdentifier = "Xcode.DebuggerFoundation.Launcher.LLDB"
+      shouldUseLaunchSchemeArgsEnv = "YES"
+      buildConfiguration = "Debug">
+      <Testables>
+         <TestableReference
+            skipped = "NO">
+            <BuildableReference
+               BuildableIdentifier = "primary"
+               BlueprintIdentifier = "8C45AC1D19EF97EB00D0B22A"
+               BuildableName = "FixturesTests.xctest"
+               BlueprintName = "FixturesTests"
+               ReferencedContainer = "container:Fixtures.xcodeproj">
+            </BuildableReference>
+         </TestableReference>
+      </Testables>
+      <MacroExpansion>
+         <BuildableReference
+            BuildableIdentifier = "primary"
+            BlueprintIdentifier = "8C45AC0819EF97EB00D0B22A"
+            BuildableName = "Fixtures.app"
+            BlueprintName = "Fixtures"
+            ReferencedContainer = "container:Fixtures.xcodeproj">
+         </BuildableReference>
+      </MacroExpansion>
+   </TestAction>
+   <LaunchAction
+      selectedDebuggerIdentifier = "Xcode.DebuggerFoundation.Debugger.LLDB"
+      selectedLauncherIdentifier = "Xcode.DebuggerFoundation.Launcher.LLDB"
+      launchStyle = "0"
+      useCustomWorkingDirectory = "NO"
+      buildConfiguration = "Debug"
+      ignoresPersistentStateOnLaunch = "NO"
+      debugDocumentVersioning = "YES"
+      allowLocationSimulation = "YES">
+      <BuildableProductRunnable>
+         <BuildableReference
+            BuildableIdentifier = "primary"
+            BlueprintIdentifier = "8C45AC0819EF97EB00D0B22A"
+            BuildableName = "Fixtures.app"
+            BlueprintName = "Fixtures"
+            ReferencedContainer = "container:Fixtures.xcodeproj">
+         </BuildableReference>
+      </BuildableProductRunnable>
+      <AdditionalOptions>
+      </AdditionalOptions>
+   </LaunchAction>
+   <ProfileAction
+      shouldUseLaunchSchemeArgsEnv = "YES"
+      savedToolIdentifier = ""
+      useCustomWorkingDirectory = "NO"
+      buildConfiguration = "Release"
+      debugDocumentVersioning = "YES">
+      <BuildableProductRunnable>
+         <BuildableReference
+            BuildableIdentifier = "primary"
+            BlueprintIdentifier = "8C45AC0819EF97EB00D0B22A"
+            BuildableName = "Fixtures.app"
+            BlueprintName = "Fixtures"
+            ReferencedContainer = "container:Fixtures.xcodeproj">
+         </BuildableReference>
+      </BuildableProductRunnable>
+   </ProfileAction>
+   <AnalyzeAction
+      buildConfiguration = "Debug">
+   </AnalyzeAction>
+   <ArchiveAction
+      buildConfiguration = "Release"
+      revealArchiveInOrganizer = "YES">
+   </ArchiveAction>
+</Scheme>

metadata

@@ -1,14 +1,14 @@
 --- !ruby/object:Gem::Specification
 name: mayday
 version: !ruby/object:Gem::Version
-  version: 0.1.0
+  version: 0.1.1
 platform: ruby
 authors:
 - Mark Larsen
 autorequire: 
 bindir: bin
 cert_chain: []
-date: 2014-10-22 00:00:00.000000000 Z
+date: 2014-10-23 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: bundler
@@ -81,19 +81,19 @@ dependencies:
       - !ruby/object:Gem::Version
         version: 0.6.3
 - !ruby/object:Gem::Dependency
-  name: colored
+  name: colorize
   requirement: !ruby/object:Gem::Requirement
     requirements:
     - - "~>"
       - !ruby/object:Gem::Version
-        version: '1.2'
+        version: 0.7.3
   type: :runtime
   prerelease: false
   version_requirements: !ruby/object:Gem::Requirement
     requirements:
     - - "~>"
       - !ruby/object:Gem::Version
-        version: '1.2'
+        version: 0.7.3
 - !ruby/object:Gem::Dependency
   name: sourcify
   requirement: !ruby/object:Gem::Requirement
@@ -153,7 +153,7 @@ files:
 - mayday.gemspec
 - spec/fixtures/Fixtures/Fixtures.xcodeproj/project.pbxproj
 - spec/fixtures/Fixtures/Fixtures.xcodeproj/project.xcworkspace/contents.xcworkspacedata
-- spec/fixtures/Fixtures/Fixtures.xcodeproj/xcuserdata/marklarsen.xcuserdatad/xcschemes/Fixtures.xcscheme
+- spec/fixtures/Fixtures/Fixtures.xcodeproj/xcshareddata/xcschemes/Fixtures.xcscheme
 - spec/fixtures/Fixtures/Fixtures/AppDelegate.swift
 - spec/fixtures/Fixtures/Fixtures/Base.lproj/LaunchScreen.xib
 - spec/fixtures/Fixtures/Fixtures/Base.lproj/Main.storyboard
@@ -202,7 +202,7 @@ summary: Custom warnings and errors
 test_files:
 - spec/fixtures/Fixtures/Fixtures.xcodeproj/project.pbxproj
 - spec/fixtures/Fixtures/Fixtures.xcodeproj/project.xcworkspace/contents.xcworkspacedata
-- spec/fixtures/Fixtures/Fixtures.xcodeproj/xcuserdata/marklarsen.xcuserdatad/xcschemes/Fixtures.xcscheme
+- spec/fixtures/Fixtures/Fixtures.xcodeproj/xcshareddata/xcschemes/Fixtures.xcscheme
 - spec/fixtures/Fixtures/Fixtures/AppDelegate.swift
 - spec/fixtures/Fixtures/Fixtures/Base.lproj/LaunchScreen.xib
 - spec/fixtures/Fixtures/Fixtures/Base.lproj/Main.storyboard