maven 0.8.pre.0-java

data/bin/translate.conf

@@ -0,0 +1,8 @@
+main is org.sonatype.maven.polyglot.cli.PolyglotTranslatorCli from plexus.core
+
+set maven.home default ${user.home}/m2
+set p2-runtimeLocation default ${maven.home}/p2
+
+[plexus.core]
+load ${maven.home}/ext/*.jar
+load ${maven.home}/lib/*.jar

data/conf/settings.xml

@@ -0,0 +1,257 @@
+<?xml version="1.0" encoding="UTF-8"?>
+
+<!--
+Licensed to the Apache Software Foundation (ASF) under one
+or more contributor license agreements.  See the NOTICE file
+distributed with this work for additional information
+regarding copyright ownership.  The ASF licenses this file
+to you under the Apache License, Version 2.0 (the
+"License"); you may not use this file except in compliance
+with the License.  You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing,
+software distributed under the License is distributed on an
+"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+KIND, either express or implied.  See the License for the
+specific language governing permissions and limitations
+under the License.
+-->
+
+<!--
+ | This is the configuration file for Maven. It can be specified at two levels:
+ |
+ |  1. User Level. This settings.xml file provides configuration for a single user, 
+ |                 and is normally provided in ${user.home}/.m2/settings.xml.
+ |
+ |                 NOTE: This location can be overridden with the CLI option:
+ |
+ |                 -s /path/to/user/settings.xml
+ |
+ |  2. Global Level. This settings.xml file provides configuration for all Maven
+ |                 users on a machine (assuming they're all using the same Maven
+ |                 installation). It's normally provided in 
+ |                 ${maven.home}/conf/settings.xml.
+ |
+ |                 NOTE: This location can be overridden with the CLI option:
+ |
+ |                 -gs /path/to/global/settings.xml
+ |
+ | The sections in this sample file are intended to give you a running start at
+ | getting the most out of your Maven installation. Where appropriate, the default
+ | values (values used when the setting is not specified) are provided.
+ |
+ |-->
+<settings xmlns="http://maven.apache.org/settings/1.0.0" 
+          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
+          xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
+  <!-- localRepository
+   | The path to the local repository maven will use to store artifacts.
+   |
+   | Default: ~/.m2/repository
+  <localRepository>/path/to/local/repo</localRepository>
+  -->
+
+  <!-- interactiveMode
+   | This will determine whether maven prompts you when it needs input. If set to false,
+   | maven will use a sensible default value, perhaps based on some other setting, for
+   | the parameter in question.
+   |
+   | Default: true
+  <interactiveMode>true</interactiveMode>
+  -->
+
+  <!-- offline
+   | Determines whether maven should attempt to connect to the network when executing a build.
+   | This will have an effect on artifact downloads, artifact deployment, and others.
+   |
+   | Default: false
+  <offline>false</offline>
+  -->
+
+  <!-- pluginGroups
+   | This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
+   | when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
+   | "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
+   |-->
+  <pluginGroups>
+    <!-- pluginGroup
+     | Specifies a further group identifier to use for plugin lookup.
+    <pluginGroup>com.your.plugins</pluginGroup>
+    -->
+  </pluginGroups>
+
+  <!-- proxies
+   | This is a list of proxies which can be used on this machine to connect to the network.
+   | Unless otherwise specified (by system property or command-line switch), the first proxy
+   | specification in this list marked as active will be used.
+   |-->
+  <proxies>
+    <!-- proxy
+     | Specification for one proxy, to be used in connecting to the network.
+     |
+    <proxy>
+      <id>optional</id>
+      <active>true</active>
+      <protocol>http</protocol>
+      <username>proxyuser</username>
+      <password>proxypass</password>
+      <host>proxy.host.net</host>
+      <port>80</port>
+      <nonProxyHosts>local.net|some.host.com</nonProxyHosts>
+    </proxy>
+    -->
+  </proxies>
+
+  <!-- servers
+   | This is a list of authentication profiles, keyed by the server-id used within the system.
+   | Authentication profiles can be used whenever maven must make a connection to a remote server.
+   |-->
+  <servers>
+    <!-- server
+     | Specifies the authentication information to use when connecting to a particular server, identified by
+     | a unique name within the system (referred to by the 'id' attribute below).
+     | 
+     | NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are 
+     |       used together.
+     |
+    <server>
+      <id>deploymentRepo</id>
+      <username>repouser</username>
+      <password>repopwd</password>
+    </server>
+    -->
+    
+    <!-- Another sample, using keys to authenticate.
+    <server>
+      <id>siteServer</id>
+      <privateKey>/path/to/private/key</privateKey>
+      <passphrase>optional; leave empty if not used.</passphrase>
+    </server>
+    -->
+  </servers>
+
+  <!-- mirrors
+   | This is a list of mirrors to be used in downloading artifacts from remote repositories.
+   | 
+   | It works like this: a POM may declare a repository to use in resolving certain artifacts.
+   | However, this repository may have problems with heavy traffic at times, so people have mirrored
+   | it to several places.
+   |
+   | That repository definition will have a unique id, so we can create a mirror reference for that
+   | repository, to be used as an alternate download site. The mirror site will be the preferred 
+   | server for that repository.
+   |-->
+  <mirrors>
+    <!-- mirror
+     | Specifies a repository mirror site to use instead of a given repository. The repository that
+     | this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used
+     | for inheritance and direct lookup purposes, and must be unique across the set of mirrors.
+     |
+    <mirror>
+      <id>mirrorId</id>
+      <mirrorOf>repositoryId</mirrorOf>
+      <name>Human Readable Name for this Mirror.</name>
+      <url>http://my.repository.com/repo/path</url>
+    </mirror>
+     -->
+  </mirrors>
+  
+  <!-- profiles
+   | This is a list of profiles which can be activated in a variety of ways, and which can modify
+   | the build process. Profiles provided in the settings.xml are intended to provide local machine-
+   | specific paths and repository locations which allow the build to work in the local environment.
+   |
+   | For example, if you have an integration testing plugin - like cactus - that needs to know where
+   | your Tomcat instance is installed, you can provide a variable here such that the variable is 
+   | dereferenced during the build process to configure the cactus plugin.
+   |
+   | As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
+   | section of this document (settings.xml) - will be discussed later. Another way essentially
+   | relies on the detection of a system property, either matching a particular value for the property,
+   | or merely testing its existence. Profiles can also be activated by JDK version prefix, where a 
+   | value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
+   | Finally, the list of active profiles can be specified directly from the command line.
+   |
+   | NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
+   |       repositories, plugin repositories, and free-form properties to be used as configuration
+   |       variables for plugins in the POM.
+   |
+   |-->
+  <profiles>
+    <!-- profile
+     | Specifies a set of introductions to the build process, to be activated using one or more of the
+     | mechanisms described above. For inheritance purposes, and to activate profiles via <activatedProfiles/>
+     | or the command line, profiles have to have an ID that is unique.
+     |
+     | An encouraged best practice for profile identification is to use a consistent naming convention
+     | for profiles, such as 'env-dev', 'env-test', 'env-production', 'user-jdcasey', 'user-brett', etc.
+     | This will make it more intuitive to understand what the set of introduced profiles is attempting
+     | to accomplish, particularly when you only have a list of profile id's for debug.
+     |
+     | This profile example uses the JDK version to trigger activation, and provides a JDK-specific repo.
+    <profile>
+      <id>jdk-1.4</id>
+
+      <activation>
+        <jdk>1.4</jdk>
+      </activation>
+
+      <repositories>
+        <repository>
+          <id>jdk14</id>
+          <name>Repository for JDK 1.4 builds</name>
+          <url>http://www.myhost.com/maven/jdk14</url>
+          <layout>default</layout>
+          <snapshotPolicy>always</snapshotPolicy>
+        </repository>
+      </repositories>
+    </profile>
+    -->
+
+    <!--
+     | Here is another profile, activated by the system property 'target-env' with a value of 'dev',
+     | which provides a specific path to the Tomcat instance. To use this, your plugin configuration
+     | might hypothetically look like:
+     |
+     | ...
+     | <plugin>
+     |   <groupId>org.myco.myplugins</groupId>
+     |   <artifactId>myplugin</artifactId>
+     |   
+     |   <configuration>
+     |     <tomcatLocation>${tomcatPath}</tomcatLocation>
+     |   </configuration>
+     | </plugin>
+     | ...
+     |
+     | NOTE: If you just wanted to inject this configuration whenever someone set 'target-env' to
+     |       anything, you could just leave off the <value/> inside the activation-property.
+     |
+    <profile>
+      <id>env-dev</id>
+
+      <activation>
+        <property>
+          <name>target-env</name>
+          <value>dev</value>
+        </property>
+      </activation>
+
+      <properties>
+        <tomcatPath>/path/to/tomcat/instance</tomcatPath>
+      </properties>
+    </profile>
+    -->
+  </profiles>
+
+  <!-- activeProfiles
+   | List of profiles that are active for all builds.
+   |
+  <activeProfiles>
+    <activeProfile>alwaysActiveProfile</activeProfile>
+    <activeProfile>anotherAlwaysActiveProfile</activeProfile>
+  </activeProfiles>
+  -->
+</settings>

metadata

@@ -0,0 +1,110 @@
+--- !ruby/object:Gem::Specification 
+name: maven
+version: !ruby/object:Gem::Version 
+  prerelease: true
+  segments: 
+    - 0
+    - 8
+    - pre
+    - 0
+  version: 0.8.pre.0
+platform: java
+authors: 
+  - mkristian
+autorequire: 
+bindir: bin
+cert_chain: []
+
+date: 2010-08-08 00:00:00 +05:30
+default_executable: 
+dependencies: []
+
+description: maven support for rubygems based on maven 3.0-alpha-6. it allows to use xyz.gemspec file as pom file or the usual pom.xml files. there is also experimentel pom.rb with a ruby DSL. this gem is a stripped polyglot-maven which only includes the pmaven-jruby part. the executable runs only with jruby.
+email: 
+  - m.kristian@web.de
+executables: 
+  - maven
+extensions: []
+
+extra_rdoc_files: 
+  - NOTICE.txt
+  - LICENSE.txt
+  - README.txt
+files: 
+  - README.txt
+  - LICENSE.txt
+  - NOTICE.txt
+  - bin/mvn.bat
+  - bin/mvnyjp
+  - bin/m2.conf
+  - bin/mvnDebug
+  - bin/translate.conf
+  - bin/translate.bat
+  - bin/mvn
+  - bin/mvnDebug.bat
+  - bin/maven
+  - bin/translate
+  - boot/plexus-classworlds-2.2.3.jar
+  - conf/settings.xml
+  - ext/jruby-complete-1.5.1.jar
+  - ext/pmaven-jruby-0.8-SNAPSHOT.jar
+  - lib/plexus-cipher-1.4.jar
+  - lib/google-collections-1.0.jar
+  - lib/wagon-http-lightweight-1.0-beta-6.jar
+  - lib/pmaven-cli-0.8.pre.0.jar
+  - lib/xbean-reflect-3.4.jar
+  - lib/maven-compat-3.0-beta-1.jar
+  - lib/maven-embedder-3.0-beta-1.jar
+  - lib/maven-model-builder-3.0-beta-1.jar
+  - lib/nekohtml-1.9.6.2.jar
+  - lib/plexus-interpolation-1.11.jar
+  - lib/pmaven-common-0.8-SNAPSHOT.jar
+  - lib/wagon-provider-api-1.0-beta-6.jar
+  - lib/maven-plugin-api-3.0-beta-1.jar
+  - lib/plexus-utils-2.0.3.jar
+  - lib/xercesMinimal-1.9.6.2.jar
+  - lib/wagon-file-1.0-beta-6.jar
+  - lib/wagon-http-shared-1.0-beta-6.jar
+  - lib/commons-cli-1.2.jar
+  - lib/maven-core-3.0-beta-1.jar
+  - lib/maven-model-3.0-beta-1.jar
+  - lib/plexus-sec-dispatcher-1.3.jar
+  - lib/maven-settings-3.0-beta-1.jar
+  - lib/plexus-component-annotations-1.5.4.jar
+  - lib/plexus-container-default-1.5.4.jar
+  - lib/maven-artifact-3.0-beta-1.jar
+has_rdoc: true
+homepage: http://github.com/sonatype/polyglot-maven/tree/maven-gem
+licenses: []
+
+post_install_message: 
+rdoc_options: 
+  - --main
+  - README.txt
+require_paths: 
+  - lib
+required_ruby_version: !ruby/object:Gem::Requirement 
+  requirements: 
+    - - ">="
+      - !ruby/object:Gem::Version 
+        segments: 
+          - 0
+        version: "0"
+required_rubygems_version: !ruby/object:Gem::Requirement 
+  requirements: 
+    - - ">"
+      - !ruby/object:Gem::Version 
+        segments: 
+          - 1
+          - 3
+          - 1
+        version: 1.3.1
+requirements: []
+
+rubyforge_project: 
+rubygems_version: 1.3.6
+signing_key: 
+specification_version: 3
+summary: maven support for rubygems
+test_files: []
+