machine_setup 0.0.1

data/.document

@@ -0,0 +1,5 @@
+README.rdoc
+lib/**/*.rb
+bin/*
+features/**/*.feature
+MIT-LICENSE

data/.gitignore

@@ -0,0 +1,27 @@
+## MAC OS
+.DS_Store
+
+## TEXTMATE
+*.tmproj
+tmtags
+
+## EMACS
+*~
+\#*
+.\#*
+
+## VIM
+*.swp
+
+## PROJECT::GENERAL
+coverage
+rdoc
+pkg
+
+## RubyMine
+.idea
+
+## PROJECT::SPECIFIC
+
+/test/trans.rb
+/test/y.rb

data/MIT-LICENSE

@@ -0,0 +1,20 @@
+Copyright (c) 2009 robi-wan
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

data/README.rdoc

@@ -0,0 +1,17 @@
+= machine_setup
+
+Generating configuration files for a machine setup.
+
+== Note on Patches/Pull Requests
+
+* Fork the project.
+* Make your feature addition or bug fix.
+* Add tests for it. This is important so I don't break it in a
+  future version unintentionally.
+* Commit, do not mess with rakefile, version, or history.
+  (if you want to have your own version, that is fine but bump version in a commit by itself I can ignore when I pull)
+* Send me a pull request. Bonus points for topic branches.
+
+== License
+
+MIT License. See the included MIT-LICENSE file.

data/Rakefile

@@ -0,0 +1,54 @@
+require 'rubygems'
+require 'rake'
+
+begin
+  require 'jeweler'
+  Jeweler::Tasks.new do |gem|
+    gem.name = "machine_setup"
+    gem.executables = ["setup_config_gen.rb"]
+    gem.summary = %Q{Generating configuration for machine setup parameters.}
+    gem.description = %Q{Helps generating configuration files for machine setup parameters.}
+    gem.email = "robi-wan@suyu.de"
+    gem.homepage = "http://github.com/robi-wan/machine_setup"
+    gem.authors = ["robi-wan"]
+    gem.add_runtime_dependency "i18n", ">= 0.3.0"
+    # gem is a Gem::Specification... see http://www.rubygems.org/read/chapter/20 for additional settings
+  end
+  Jeweler::GemcutterTasks.new
+rescue LoadError
+  puts "Jeweler (or a dependency) not available. Install it with: gem install jeweler"
+end
+
+require 'rake/testtask'
+Rake::TestTask.new(:test) do |test|
+  test.libs << 'lib' << 'test'
+  test.pattern = 'test/**/test_*.rb'
+  test.verbose = true
+end
+
+begin
+  require 'rcov/rcovtask'
+  Rcov::RcovTask.new do |test|
+    test.libs << 'test'
+    test.pattern = 'test/**/test_*.rb'
+    test.verbose = true
+  end
+rescue LoadError
+  task :rcov do
+    abort "RCov is not available. In order to run rcov, you must: sudo gem install spicycode-rcov"
+  end
+end
+
+task :test => :check_dependencies
+
+task :default => :test
+
+require 'rake/rdoctask'
+Rake::RDocTask.new do |rdoc|
+  version = File.exist?('VERSION') ? File.read('VERSION') : ""
+
+  rdoc.rdoc_dir = 'rdoc'
+  rdoc.title = "plc_version_deploy #{version}"
+  rdoc.rdoc_files.include('README*')
+  rdoc.rdoc_files.include('lib/**/*.rb')
+end

data/TODO

@@ -0,0 +1,9 @@
+- complete underleaver example
+
+- rename drive params to make meaning more clear
+
+- generate import file for epas with parameter numbers
+
+- code cleanup
+
+- add support for min-max-parameters (programme parameters)

data/VERSION

@@ -0,0 +1 @@
+0.0.1

data/bin/setup_config_gen.rb

@@ -0,0 +1,30 @@
+#!/usr/bin/env ruby
+param_def=ARGV[0]
+
+throw RuntimeError.new("parameter definition nicht angegeben") if param_def.nil?
+throw RuntimeError.new("parameter definition existiert nicht") unless File.file?(param_def)
+
+$LOAD_PATH.unshift File.join(File.dirname(__FILE__), '..', 'lib')
+require 'setup_configuration'
+
+# load file with parameter dsl
+load param_def
+
+# get reference to suite instance which holds parameter configuration
+suite=SetupConfiguration::Suite.instance
+
+#set output path
+generator = SetupConfiguration::SuiteGenerator.new()
+generator.output_path=File.dirname(param_def)
+
+# load files with translations
+SetupConfiguration::Translation.translation_files(suite.name).each() do |t|
+  trans_file=File.join(File.dirname(param_def), t)
+  if File.file?(trans_file)
+    SetupConfiguration::Translation::Translator.i18n_load_path(trans_file)
+  else
+    puts "WARNING: expected file with translations '#{trans_file}' not found."
+  end
+end
+
+generator.generate()

data/examples/underleaver/underleaver.setup.param

@@ -0,0 +1,105 @@
+SetupConfiguration :underleaver do
+
+  category :common do
+    param :underleaver_config, 1
+    param :distance_photo_sensor, 2
+    param :distance_blade_to_sheet_drive, 3
+    param :distance_sheet_drive_to_sheet_exit, 4
+    param :time_for_cutting_unit, 5
+
+    param :paper_jam_detection_active, 6
+    param :paper_jam_detection_signal_length, 7 do
+      depends_on :paper_jam_detection_active
+    end
+    param :paper_jam_detection_check_time, 8 do
+      depends_on :paper_jam_detection_active
+    end
+
+    param :ext_enabling_following_unit, 10
+    param :ext_enabling_following_unit_method, 11 do
+      depends_on :ext_enabling_following_unit
+    end
+    param :ext_enabling_following_unit_delay, 12 do
+      depends_on :ext_enabling_following_unit
+    end
+
+    param :ext_enabling_previous_unit, 13
+  end
+
+  category :drives do
+
+    # paper roll drive
+    param :paper_roll_drive_config, 300
+    param :paper_roll_drive_distance_revolution, 301 do
+      depends_on :paper_roll_drive_config
+    end
+    param :paper_roll_drive_gear_in, 302 do
+      depends_on :paper_roll_drive_config
+    end
+    param :paper_roll_drive_gear_out, 303 do
+      depends_on :paper_roll_drive_config
+    end
+
+    # blade drive
+    param :blade_drive_config, 310
+    param :blade_drive_diameter, 311 do
+      depends_on :blade_drive_config
+    end
+    param :blade_drive_gear_in, 312 do
+      depends_on :blade_drive_config
+    end
+    param :blade_drive_gear_out, 313 do
+      depends_on :blade_drive_config
+    end
+
+    #paper feed drive
+    param :paper_feed_drive_config, 320
+    param :paper_feed_drive_distance_revolution, 321 do
+      depends_on :paper_feed_drive_config
+    end
+    param :paper_feed_drive_gear_in, 322 do
+      depends_on :paper_feed_drive_config
+    end
+    param :paper_feed_drive_gear_out, 323 do
+      depends_on :paper_feed_drive_config
+    end
+
+    #transport drive
+    param :transport_drive_config, 330
+    param :transport_drive_distance_revolution, 331 do
+      depends_on :transport_drive_config
+    end
+    param :transport_drive_gear_in, 332 do
+      depends_on :transport_drive_config
+    end
+    param :transport_drive_gear_out, 333 do
+      depends_on :transport_drive_config
+    end
+    param :transport_drive_belt_length, 334 do
+      depends_on :transport_drive_config
+    end
+
+    #infeed drive
+    param :infeed_drive_config, 350
+    param :infeed_drive_distance_revolution, 351 do
+      depends_on :infeed_drive_config
+    end
+    param :infeed_drive_gear_in, 352 do
+      depends_on :infeed_drive_config
+    end
+    param :infeed_drive_gear_out, 353 do
+      depends_on :infeed_drive_config
+    end
+    param :infeed_drive_belt_length, 354 do
+      depends_on :infeed_drive_config
+    end
+  end
+
+  setting do
+    min (0..0)
+    max (0..0)
+    balance_min (3000..3029)
+    balance_max (3030..3059)
+  end
+
+end

data/examples/underleaver/underleaver.setup.param.de.yml

@@ -0,0 +1,207 @@
+de:
+  #Tabs aka categories
+  common:
+    name: "Allgemein"
+
+  drives:
+    name: "Antriebe Underleaver"
+
+  #parameter
+  underleaver_config:
+    name:  "Underleaver virtuell=1 / real=0"
+    comment:  "Einerstelle:\n
+              x0: Steuerung mit realen Achsen und Schutzhauben\n
+              x1: Steuerung simuliert alle nicht angew�hlten Achsen und Schutzhauben\n
+              \n
+              Zehnerstelle:\n
+              0x: CanBus einschalten\n
+              1x: CanBus ausschalten\n
+              \n
+              Hunderterstelle:\n
+              1xx: Steuerung simuliert alle Antriebe"
+
+  distance_photo_sensor:
+    name:  "Weg Lichtschranke bis Blattaustritt"
+    comment:  ""
+
+  distance_blade_to_sheet_drive:
+    name:  "Weg Schneide bis Blattantrieb"
+    comment: ""
+
+  distance_sheet_drive_to_sheet_exit:
+    name:  "Weg Blattantrieb bis Blattaustritt"
+    comment:  ""
+
+  time_for_cutting_unit:
+    name:  "Zeit in der die Schneideeinrichtung oben sein muss [ms]"
+    comment:  ""
+
+  paper_jam_detection_active:
+    name:  "Papierstau�berwachung"
+    comment:  "Erm�glicht die Abschaltung der Papierstau�berwachung\n
+              \n
+              0=Abwahl\n
+              1=Anwahl\n
+              \n
+              (Standard: 1)"
+
+  paper_jam_detection_signal_length:
+    name:  "Signaldauer f�r Papierstau"
+    comment:  "Zeitdauer, ab der ein durchg�ngiges Signal vom Papierstausensor als Papierstau interpretiert wird.\n
+                Die Angabe erfolgt in Millisekunden, d.h. 5000 entspricht 5 Sekunden.\n
+                Bei Angabe von 0 wird die Zeitdauer programmintern festgelegt."
+
+  paper_jam_detection_check_time:
+    name:  "Papierstau�berpr�fungszeit nach 'letzem' Produkt"
+    comment:  "Die �berpr�fung, ob ein Papierstau vorliegt, erfolgt bei Beginn der F�rderung des n�chsten Blattes.
+              Kommt nach dem aktuellen Produkt eine Weile kein Produkt mehr, so erm�glicht dieser Parameter die Einstellung
+              der Zeitdauer, nach deren Ablauf eine Papierstau�berpr�fung vorgenommen wird.\n
+              Steht der Wert auf 3000, wird 3 Sekunden nach der letzten Portion auf Papierstau �berpr�ft.\n
+              \n
+              Die Angabe erfolgt in Millisekunden, d.h. 3000 entspricht 3 Sekunden.\n
+              \n
+              Die Angabe wird 1:1 im Programm verwendet."
+
+  ext_enabling_following_unit:
+    name:  "Externe Freigabe nachgelagerter Einheit (NE)"
+    comment:  "An/Abwahl der externen Freigabe der nachgelagerten Einheit.\n
+              \n
+              0: Der Underleaver arbeitet als 'Standalone'-Maschine oder besitzt innerhalb einer Linie keine nachgelagerte Einheit.\n
+              \n
+              1: Der Underleaver besitzt eine nachgelagerte Einheit und soll auf dessen Freigaben reagieren."
+
+  ext_enabling_following_unit_method:
+    name:  "Konfiguration der Freigabeart NE"
+    comment:  "Konfiguration der externen Freigabe von der nachgelagerte Einheit.\n
+              \n
+              0: Impuls - Freigabe wird durch einen Impuls umgeschalten (an->aus oder aus->an)\n
+              1: negatives Dauersignal - Freigabe bei 0V\n
+              2: positives Dauersignal - Freigabe bei 12V"
+
+  ext_enabling_following_unit_delay:
+    name:  "Konfiguration der Verz�gerung NE"
+    comment:  "Konfiguration der Verz�gerung nach Freigabesignal. [in ms]\n
+              \n
+              X: Der Wert X bestimmt die Zeit, die der Underleaver wartet nachdem das Freigabesignal empfangen wurde. Erst nach Ablauf dieser Zeit f�rdert der Underleaver weiter."
+
+  ext_enabling_previous_unit:
+    name:  "Externe Freigabe an vorgelagerte Einheit (VE)"
+    comment:  "Konfiguration der externen Freigabe an die vorgelagerte Einheit.\n
+              \n
+              0: Impuls - Freigabe wird durch einen Impuls umgeschalten (an->aus oder aus->an)\n
+              1: negatives Dauersignal - Freigabe bei 0V\n
+              2: positives Dauersignal - Freigabe bei 12V"
+
+  paper_roll_drive_config:
+    name:  "Bahnantrieb abgew�hlt=0/Servo=1/FU=2"
+    comment: &COMMON_DRIVE_CONFIG "Einerstelle: An/Abwahl\n
+            \n
+            XXX0: Achse im System nicht vorhanden ,wird vom System  simuliert.\n
+            XXX1: Achse ist im Antriebssystem als Servoantrieb vorhanden.\n
+            XXX2: Achse ist im Antriebssystem als Frequenzumrichterantrieb vorhanden.\n
+            \n
+            Zehner- und Hunderterstelle: Motortyp\n
+            \n
+            X00X = NORD_MOTOR_037\n
+            X01X = NORD_MOTOR_075\n
+            X02X = LENZE_063C32\n
+            X03X = LENZE_047C22\n
+            X04X = LENZE_063C22\n
+            X05X = INTERROLL_TM111_037_2_081\n
+            X06X = INTERROLL_TM082_012_2_056\n
+            X07X = LENZE_063C22_GEBER\n
+            X08X = LENZE_063C22_POSI\n
+            X17X = INTERROLL_111_2P_037_133V\n
+            X18X = INTERROLL_111_2P_037_133V_GEBER\n
+            X19X = INTERROLL_111_2P_037_133V_POSI\n
+            X20X = INTERROLL_111_2P_037_133V_GEBER_AUF_C400\n
+            X21X = HARMONIC_DRIVE_FHA_11C_D200_GEBER\n
+            \n
+            Tausenderstelle:\n
+            \n
+            0XXX = ohne PTC\n
+            1XXX = mit PTC"
+
+  paper_roll_drive_distance_revolution:
+    name:  "Bahnantrieb Weg/Umdrehung [mm]"
+    comment:  ""
+
+  paper_roll_drive_gear_in:
+    name:  "Bahnantrieb Getriebefaktor Z�hler"
+    comment: &COMMON_GEAR_IN "Anzahl der Getriebez�hne antriebseitig"
+
+  paper_roll_drive_gear_out:
+    name:  "Bahnantrieb Getriebefaktor Nenner"
+    comment:  &COMMON_GEAR_OUT "Anzahl der Getriebez�hne abtriebseitig"
+
+  blade_drive_config:
+    name:  "Messerwelle abgew�hlt=0/Servo=1/FU=2"
+    comment: *COMMON_DRIVE_CONFIG
+
+  blade_drive_diameter:
+    name:  "Messerwelle Durchmesser [mm]"
+    comment:  ""
+
+  blade_drive_gear_in:
+    name:  "Messerwelle Getriebefaktor Z�hler"
+    comment:  *COMMON_GEAR_IN
+
+  blade_drive_gear_out:
+    name:  "Messerwelle Getriebefaktor Nenner"
+    comment:  *COMMON_GEAR_OUT
+
+  paper_feed_drive_config:
+    name:  "Blattantrieb abgew�hlt=0/Servo=1/FU=2"
+    comment:  *COMMON_DRIVE_CONFIG
+
+  paper_feed_drive_distance_revolution:
+    name:  "Blattantrieb Weg/Umdrehung [mm]"
+    comment:  ""
+
+  paper_feed_drive_gear_in:
+    name:  "Blattantrieb Getriebefaktor Z�hler"
+    comment:  *COMMON_GEAR_IN
+
+  paper_feed_drive_gear_out:
+    name:  "Blattantrieb Getriebefaktor Nenner"
+    comment:  *COMMON_GEAR_OUT
+
+  transport_drive_config:
+    name:  "Portionsauflageband abgew�hlt=0/Servo=1/FU=2"
+    comment:  *COMMON_DRIVE_CONFIG
+
+  transport_drive_distance_revolution:
+    name:  "Portionsauflageband Weg/Umdrehung [mm]"
+    comment:  ""
+
+  transport_drive_gear_in:
+    name:  "Portionsauflageband Getriebefaktor Z�hler"
+    comment:  *COMMON_GEAR_IN
+
+  transport_drive_gear_out:
+    name:  "Portionsauflageband Getriebefaktor Nenner"
+    comment:  *COMMON_GEAR_OUT
+
+  transport_drive_belt_length:
+    name:  "Portionsauflageband Bandl�nge"
+    comment:  "Gesamte Bandl�nge des Portionsauflagebandes.\nAngabe erfolgt in Millimeter."
+
+  infeed_drive_config:
+    name:  "Einlegeband abgew�hlt=0/Servo=1/FU=2"
+    comment:  *COMMON_DRIVE_CONFIG
+
+  infeed_drive_distance_revolution:
+    name:  "Einlegeband Weg/Umdrehung [mm]"
+    comment:  ""
+
+  infeed_drive_gear_in:
+    name:  "Einlegeband Getriebefaktor Z�hler"
+    comment:  *COMMON_GEAR_IN
+
+  infeed_drive_gear_out:
+    name:  "Einlegeband Getriebefaktor Nenner"
+    comment:  *COMMON_GEAR_OUT
+
+  infeed_drive_belt_length:
+    name:  "Einlegeband Bandl�nge"
+    comment:  "Gesamte Bandl�nge des Einlegebandes.\nAngabe erfolgt in Millimeter."