lutaml-model 0.7.7 → 0.8.1

data/docs/_pages/attributes.adoc

@@ -0,0 +1,1156 @@
+---
+title: Attributes
+nav_order: 4
+---
+
+= Attributes
+:toc:
+:toclevels: 3
+
+[[attribute-definition]]
+== General
+
+=== Basic attributes
+
+An attribute is the basic building block of a model. It is a named value that
+stores a single piece of data (which may be one or multiple pieces of data).
+
+An attribute only accepts the type of value defined in the attribute definition.
+
+The attribute value type can be one of the following:
+
+* Value (inherits from Lutaml::Model::Value)
+* Model (inherits from Lutaml::Model::Serializable)
+
+Syntax:
+
+[source,ruby]
+----
+attribute :name_of_attribute, Type
+----
+
+Where,
+
+`name_of_attribute`:: The defined name of the attribute.
+`Type`:: The type of the attribute.
+
+.Using the `attribute` class method to define simple attributes
+[example]
+====
+[source,ruby]
+----
+class Studio < Lutaml::Model::Serializable
+  attribute :name, :string
+  attribute :address, :string
+  attribute :established, :date
+end
+----
+
+[source,ruby]
+----
+s = Studio.new(name: 'Pottery Studio', address: '123 Clay St', established: Date.new(2020, 1, 1))
+puts s.name
+#=> "Pottery Studio"
+puts s.address
+#=> "123 Clay St"
+puts s.established
+#=> <Date: 2020-01-01>
+----
+====
+
+==== Restricting the value of an attribute
+
+The `restrict` class method is used to update or refine the validation rules for an attribute that has already been defined. This allows you to apply additional or stricter constraints to an existing attribute without redefining it.
+
+.Using the `restrict` class method to update the options of an existing attribute
+[example]
+====
+[source,ruby]
+----
+class Studio < Lutaml::Model::Serializable
+  attribute :name, :string
+  restrict :name, collection: 1..3, pattern: /[A-Za-z]+/
+end
+----
+====
+
+.Apply different restrictions to the existing attribute in multiple subclasses
+[example]
+====
+[source,ruby]
+----
+class Document < Lutaml::Model::Serializable
+  attribute :status, :string
+end
+
+class DraftDocument < Document
+  # Only allow "draft" or "in_review" as valid statuses for drafts
+  restrict :status, values: %w[draft in_review]
+end
+
+class PublishedDocument < Document
+  # Only allow "published" or "archived" as valid statuses for published documents
+  restrict :status, values: %w[published archived]
+end
+
+# Usage
+# Call .validate! to trigger validation and raise an error if the value is not allowed
+Document.new(status: "draft").validate!                # valid, there are no validation rules for `Document`
+Document.new(status: "published").validate!            # valid, there are no validation rules for `Document`
+DraftDocument.new(status: "draft").validate!           # valid
+DraftDocument.new(status: "in_review").validate!       # valid
+DraftDocument.new(status: "published").validate!       # raises error (not allowed)
+PublishedDocument.new(status: "published").validate!   # valid
+PublishedDocument.new(status: "archived").validate!    # valid
+PublishedDocument.new(status: "draft").validate!       # raises error (not allowed)
+----
+====
+
+All options that are supported by the `attribute` class method are also supported by the `restrict` method. Any unsupported option passed to `restrict` will result in a `Lutaml::Model::InvalidAttributeOptionsError` being raised.
+
+=== Polymorphic attributes
+
+==== General
+
+A polymorphic attribute is an attribute that can accept multiple types of
+values. This is useful when the attribute defines common characteristics and
+behaviors among different types.
+
+An attribute with a defined value type also accepts values that are of a class
+that is a subclass of the defined type.
+
+The assigned attribute of `Type` accepts polymorphic classes as long as the
+assigned instance is of a class that either inherits from the declared type or
+matches it.
+
+
+==== Naïve approach does not work...
+
+A naïve polymorphic approach is to define an attribute with a superclass type
+and assign instances of subclasses to it.
+
+While this approach works (somewhat) in modeling, it does not work with
+serialization (half) or deserialization (not at all).
+
+The following example illustrates why such approach is naïve.
+
+.An attribute receiving the superclass type accepts subclass instances
+[example]
+====
+[source,ruby]
+----
+class Studio < Lutaml::Model::Serializable
+  attribute :name, :string
+end
+
+# CeramicStudio is a specialization of Studio
+class CeramicStudio < Studio
+  attribute :clay_type, :string
+end
+
+class PotteryClass < Lutaml::Model::Serializable
+  # the :studio attribute should accept Studio and CeramicStudio
+  attribute :studio, Studio
+end
+----
+
+[source,ruby]
+----
+# This works
+> s = Studio.new(name: 'Pottery Studio')
+> p = PotteryClass.new(studio: s)
+> p.studio
+# => <Studio:0x0000000104ac7240 @name="Pottery Studio", @address=nil, @established=nil>
+
+# A subclass of Studio is also valid
+> s = CeramicStudio.new(name: 'Ceramic World', clay_type: 'Red')
+> p = PotteryClass.new(studio: s)
+> p.studio
+# => <CeramicStudio:0x0000000104ac7240 @name="Ceramic World", @address=nil, @established=nil, @clay_type="Red">
+> p.studio.name
+# => "Ceramic World"
+> p.studio.clay_type
+# => "Red"
+----
+
+So far so good. However, this approach does not work in serialization.
+This is what happens when we call `to_yaml` on the `PotteryClass` instance.
+
+[source,ruby]
+----
+> puts p.to_yaml
+# => ---
+# => studio:
+# =>   name: Ceramic World
+# =>   clay_type: Red
+----
+
+When deserializing the YAML string, the `studio` attribute will be deserialized
+as an instance of `Studio`, not `CeramicStudio`. This means that the `clay_type`
+attribute will be lost.
+
+[source,ruby]
+----
+> p = PotteryClass.load_yaml("---\nstudio:\n  name: Ceramic World\n  clay_type: Red")
+> p.studio
+# => <Studio:0x0000000104ac7240 @name="Ceramic World">
+> p.studio.clay_type
+# => ERROR
+----
+====
+
+
+==== Proper polymorphic approaches
+
+Lutaml::Model offers rich support for polymorphic attributes, through
+configuration at both attribute and serialization levels.
+
+In polymorphism, there are the following components:
+
+polymorphic attribute:: the attribute that can be assigned multiple types.
+
+polymorphic attribute class:: the class that has a polymorphic attribute.
+
+polymorphic superclass:: a class assigned to a polymorphic attribute that serves
+as the superclass for all accepted polymorphic classes.
+
+polymorphic subclass:: a class that is a subclass of the polymorphic superclass
+and can be assigned to the polymorphic attribute. There are often more than 2
+subclasses in a scenario since polymorphism is meant to apply to multiple types.
+
+To utilize polymorphic attributes, modification to all of these components are
+necessary.
+
+In serialized form, polymorphic classes are differentiated by an explicit
+"polymorphic class differentiator".
+
+.Sample serialization of polymorphic classes in YAML
+[example]
+====
+In key-value formats like YAML, the polymorphic class differentiator is
+typically a key-value pair that contains the polymorphic class name.
+
+[source,yaml]
+----
+references:
+- _class: Document # This is a DocumentReference
+  name: "The Tibetan Book of the Dead"
+  document_id: "book:tbtd"
+- _class: Anchor # This is an AnchorReference
+  name: "Chapter 1"
+  anchor_id: "book:tbtd:anchor-1"
+----
+====
+
+.Sample serialization of polymorphic classes in XML
+[example]
+====
+In XML, the polymorphic class differentiator is typically an attribute that
+contains the polymorphic class name.
+
+[source,xml]
+----
+<references>
+  <!-- The "document-ref" value is a DocumentReference -->
+  <reference reference-type="document-ref">
+    <name>The Tibetan Book of the Dead</name>
+    <document_id>book:tbtd</document_id>
+  </reference>
+  <!-- The "anchor-ref" value is an AnchorReference -->
+  <reference reference-type="anchor-ref">
+    <name>Chapter 1</name>
+    <anchor_id>book:tbtd:anchor-1</anchor_id>
+  </reference>
+</references>
+----
+====
+
+NOTE: While it is possible to determine different polymorphic classes based on
+the attributes they contain, such mechanism would not be able to determine the
+polymorphic class if serializations of two polymorphic subclasses can be
+identical.
+
+
+There are two basic scenarios in using polymorphic attributes:
+
+* Scenario 1: Setting polymorphism in the polymorphic superclass:
+
+.. <<polymorphic-superclass-class>>
+.. <<polymorphic-differentiator-in-superclass>>
+.. <<polymorphic-attribute-class-mapping-in-superclass>>
+
+* Scenario 2: Setting polymorphism in the individual polymorphic subclasses:
+
+.. <<polymorphic-superclass-class>>
+.. <<polymorphic-differentiator-in-subclass>>
+.. <<polymorphic-attribute-class-mapping-in-subclasses>>
+
+
+NOTE: Please refer to `spec/lutaml/model/polymorphic_spec.rb` for full examples
+of implementing polymorphic attributes.
+
+
+[[polymorphic-superclass-class]]
+==== Defining the polymorphic attribute
+
+The polymorphic attribute class is a class that has a polymorphic attribute.
+
+At this level, the `polymorphic` option is used to specify the types that the
+polymorphic attribute can accept.
+
+[source,ruby]
+----
+class PolymorphicAttributeClass < Lutaml::Model::Serializable
+  attribute :attribute_name, <1>
+    {polymorphic-superclass-class}, <2>
+    {options}, <3>
+    polymorphic: [ <4>
+      polymorphic-subclass-1, <5>
+      polymorphic-subclass-2,
+    ]
+end
+----
+<1> The name of the polymorphic attribute.
+<2> The polymorphic superclass class.
+<3> Any options for the attribute.
+<4> The `polymorphic` option that determines the acceptable polymorphic subclasses, or just `true`.
+<5> The polymorphic subclasses.
+
+The `polymorphic` option is an array of polymorphic subclasses that the
+attribute can accept.
+
+These options enable the following scenarios.
+
+* If the polymorphic attribute is to only contain instances of the
+`polymorphic-superclass-class`, not its subclasses, then the `polymorphic`
+option is not needed.
++
+[example]
+====
+In the following code, `ReferenceSet` has an attribute `references` that only
+accepts instances of `Reference`. The `polymorphic` option does not apply.
+
+[source,ruby]
+----
+class ReferenceSet < Lutaml::Model::Serializable
+  attribute :references, Reference, collection: true
+end
+----
+====
+
+* If the attribute (collection or not) is meant to only contain one type of
+polymorphic subclasses, then the `polymorphic` option is also not needed,
+because the polymorphic subclass can be stated as the attribute value type.
++
+[example]
+====
+In the following code, `ReferenceSet` has an attribute `references` that only
+accepts instances of `DocumentReference`, a subclass of `Reference`.
+The `polymorphic` option does not apply.
+
+[source,ruby]
+----
+class ReferenceSet < Lutaml::Model::Serializable
+  attribute :references, DocumentReference, collection: true
+end
+----
+====
+
+* If the attribute (collection or not) is meant to contain instances belonging
+to any polymorphic subclass of a defined base class, then set the `polymorphic:
+true` option.
++
+[example]
+====
+In the following code, `ReferenceSet` is a class that has a polymorphic
+attribute `references`. The `references` attribute can accept instances of
+any polymorphic subclass of the `Reference` base class, so `polymorphic: true`
+is set.
+
+[source,ruby]
+----
+class ReferenceSet < Lutaml::Model::Serializable
+  attribute :references, Reference, collection: true, polymorphic: true
+end
+----
+====
+
+* If the attribute (collection or not) is meant to contain instances belonging
+to more than one polymorphic subclass, then those acceptable polymorphic
+subclasses should be explicitly specified in the `polymorphic: [...]` option.
++
+[example]
+====
+In the following code, `ReferenceSet` is a class that has a polymorphic
+attribute `references`. The `references` attribute can accept instances of
+`DocumentReference` and `AnchorReference`, both of which are subclasses of
+`Reference`.
+
+[source,ruby]
+----
+class ReferenceSet < Lutaml::Model::Serializable
+  attribute :references, Reference, collection: true, polymorphic: [
+    DocumentReference,
+    AnchorReference,
+  ]
+end
+----
+====
+
+[[polymorphic-subclass-differentiator]]
+==== Differentiating polymorphic subclasses
+
+===== General
+
+A polymorphic subclass needs an additional attribute with the
+`polymorphic_class` option to allow Lutaml::Model for identifying itself in
+serialization. This attribute is called the "polymorphic class differentiator".
+
+There are two methods for setting the polymorphic class differentiator:
+
+* Setting the polymorphic class differentiator in the polymorphic superclass, as
+polymorphic subclasses inherit from it (relying on <<model-inheritance>>).
+
+* Setting the polymorphic class differentiator in the individual polymorphic subclasses
+
+[[polymorphic-differentiator-in-superclass]]
+===== Setting the differentiator in the polymorphic superclass
+
+The polymorphic class differentiator can be set in the polymorphic superclass.
+This scenario fits best if there are many polymorphic subclasses and the
+polymorphic superclass can be modified.
+
+Syntax:
+
+.Setting the polymorphic differentiator in the superclass
+[source,ruby]
+----
+class PolymorphicSuperclass < Lutaml::Model::Serializable
+  attribute :{_polymorphic_differentiator}, <1>
+    :string, <2>
+    polymorphic_class: true <3>
+  # ...
+end
+----
+<1> The polymorphic differentiator is a normal attribute that can be
+assigned to any name.
+<2> The polymorphic differentiator must have a value type of `:string`.
+<3> The option for `polymorphic_class` must be set to `true` to indicate
+that this attribute accepts subclass types.
+
+[[polymorphic-differentiator-in-subclass]]
+===== Setting the differentiator in the individual polymorphic subclasses
+
+The polymorphic class differentiator can be set in the individual polymorphic
+subclasses. This scenario fits best if there are few polymorphic subclasses and
+the polymorphic superclass cannot be modified.
+
+Syntax:
+
+.Setting the polymorphic differentiator in the subclass
+[source,ruby]
+----
+# No modification to the superclass is needed.
+class PolymorphicSuperclass < Lutaml::Model::Serializable
+  # ...
+end
+
+# The polymorphic differentiator is set in the subclass.
+class PolymorphicSubclass < PolymorphicSuperclass
+  attribute
+    :{_polymorphic_differentiator}, <1>
+    :string, <2>
+    polymorphic_class: true <3>
+  # ...
+end
+----
+<1> The polymorphic differentiator is a normal attribute that can be
+assigned to any name.
+<2> The polymorphic differentiator must have a value type of `:string`.
+<3> The option for `polymorphic_class` must be set to `true` to indicate
+that this attribute accepts subclass types.
+
+
+[[polymorphic-differentiator-in-serialization]]
+==== Polymorphic differentiation in serialization
+
+===== General
+
+The polymorphic attribute class needs to determine what class to use based on
+the serialized value of the polymorphic differentiator.
+
+The polymorphic attribute class mapping is format-independent, allowing for
+differentiation of polymorphic subclasses in different serialization formats.
+
+The mapping of the serialized polymorphic differentiator can be set in either:
+
+* the polymorphic superclass; or
+* the polymorphic attribute class and the individual polymorphic subclasses.
+
+[[polymorphic-attribute-class-mapping-in-superclass]]
+===== Mapping in the polymorphic superclass
+
+This use case applies when the polymorphic superclass can be modified, and
+that polymorphism is intended to apply to all its subclasses.
+
+This is done through the `polymorphic_map` option in the serialization blocks
+inside the polymorphic attribute class.
+
+Syntax:
+
+[source,ruby]
+----
+class PolymorphicSuperclass < Lutaml::Model::Serializable
+  attribute :{_polymorphic_differentiator}, :string, polymorphic_class: true
+
+  xml do
+    (map_attribute | map_element) "XmlPolymorphicAttributeName", <1>
+      to: :{_polymorphic_differentiator}, <2>
+      polymorphic_map: { <3>
+        "xml-value-for-subclass-1" => PolymorphicSubclass1, <4>
+        "xml-value-for-subclass-2" => PolymorphicSubclass2,
+      }
+  end
+
+  (key_value | key_value_format) do
+    map "KeyValuePolymorphicAttributeName", <5>
+      to: :{_polymorphic_differentiator}, <6>
+      polymorphic_map: {
+        "keyvalue-value-for-subclass-1" => PolymorphicSubclass1,
+        "keyvalue-value-for-subclass-2" => PolymorphicSubclass2,
+      }
+  end
+end
+
+class PolymorphicSubclass1 < PolymorphicSuperclass
+  # ...
+end
+
+class PolymorphicSubclass2 < PolymorphicSuperclass
+  # ...
+end
+
+class PolymorphicAttributeClass < Lutaml::Model::Serializable
+  attribute :polymorphic_attribute,
+    PolymorphicSuperclass,
+    {options},
+    polymorphic: [
+      PolymorphicSubclass1,
+      PolymorphicSubclass2,
+    ]
+  # ...
+end
+----
+<1> The name of the XML element or attribute that contains the polymorphic
+differentiator.
+<2> The name of the polymorphic differentiator attribute defined in `attribute`
+with the `polymorphic` option.
+<3> The `polymorphic_map` option that determines the class to use based on the
+value of the differentiator.
+<4> The mapping of the differentiator value to the polymorphic subclass.
+<5> The name of the key-value element that contains the polymorphic
+differentiator.
+<6> The name of the polymorphic differentiator attribute defined in `attribute`
+with the `polymorphic` option.
+
+[example]
+====
+[source,ruby]
+----
+class Reference < Lutaml::Model::Serializable
+  attribute :_class, :string, polymorphic_class: true
+  attribute :name, :string
+
+  xml do
+    map_attribute "reference-type", to: :_class, polymorphic_map: {
+      "document-ref" => "DocumentReference",
+      "anchor-ref" => "AnchorReference",
+    }
+    map_element "name", to: :name
+  end
+
+  key_value do
+    map "_class", to: :_class, polymorphic_map: {
+      "Document" => "DocumentReference",
+      "Anchor" => "AnchorReference",
+    }
+    map "name", to: :name
+  end
+end
+
+class DocumentReference < Reference
+  attribute :document_id, :string
+
+  xml do
+    map_element "document_id", to: :document_id
+  end
+
+  key_value do
+    map "document_id", to: :document_id
+  end
+end
+
+class AnchorReference < Reference
+  attribute :anchor_id, :string
+
+  xml do
+    map_element "anchor_id", to: :anchor_id
+  end
+
+  key_value do
+    map "anchor_id", to: :anchor_id
+  end
+end
+
+class ReferenceSet < Lutaml::Model::Serializable
+  attribute :references, Reference, collection: true, polymorphic: [
+    DocumentReference,
+    AnchorReference,
+  ]
+end
+----
+
+[source,yaml]
+----
+---
+references:
+- _class: Document
+  name: The Tibetan Book of the Dead
+  document_id: book:tbtd
+- _class: Anchor
+  name: Chapter 1
+  anchor_id: book:tbtd:anchor-1
+----
+
+[source,xml]
+----
+<ReferenceSet>
+  <references reference-type="document-ref">
+    <name>The Tibetan Book of the Dead</name>
+    <document_id>book:tbtd</document_id>
+  </references>
+  <references reference-type="anchor-ref">
+    <name>Chapter 1</name>
+    <anchor_id>book:tbtd:anchor-1</anchor_id>
+  </references>
+</ReferenceSet>
+----
+====
+
+[[polymorphic-attribute-class-mapping-in-subclasses]]
+===== Mapping in the polymorphic attribute class and individual polymorphic subclasses
+
+This use case applies when the polymorphic superclass is not meant to be
+modified.
+
+This is done through the `polymorphic_map` option in the serialization blocks
+inside the polymorphic attribute class, and the `polymorphic` option in the
+individual polymorphic subclasses.
+
+In this scenario, similar to the previous case where the polymorphic differentiator
+is set at the polymorphic superclass, the following conditions must be satisifed:
+
+* the polymorphic differentiator attribute name must be the same across
+polymorphic subclasses
++
+[example]
+====
+If the model polymorphic differentiator in one polymorphic subclass is
+`_ref_type`, then it must be so in all other polymorphic subclasses.
+====
+
+* the polymorphic differentiator in the serialization formats must be
+identical within the polymorphic subclasses of that serialization format.
++
+[example]
+====
+If the XML polymorphic differentiator is `reference-type`, then it must
+be so in the XML of all polymorphic subclasses.
+====
+
+
+Syntax:
+
+[source,ruby]
+----
+# Assume that we have no access to the base class and we need to define
+# polymorphism in the sub-classes.
+class PolymorphicSuperclass < Lutaml::Model::Serializable
+end
+
+class PolymorphicSubclass1 < PolymorphicSuperclass
+  attribute :_polymorphic_differentiator, :string
+
+  xml do
+    (map_attribute | map_element) "XmlPolymorphicAttributeName", <1>
+      to: :_polymorphic_differentiator
+  end
+
+  (key_value | key_value_format) do
+    map "KeyValuePolymorphicAttributeName", <2>
+      to: :_polymorphic_differentiator
+  end
+end
+
+class PolymorphicSubclass2 < PolymorphicSuperclass
+  attribute :_polymorphic_differentiator, :string
+
+  xml do
+    (map_attribute | map_element) "XmlPolymorphicAttributeName2",
+      to: :_polymorphic_differentiator
+  end
+
+  (key_value | key_value_format) do
+    map "KeyValuePolymorphicAttributeName2",
+      to: :_polymorphic_differentiator
+  end
+end
+
+class PolymorphicAttributeClass < Lutaml::Model::Serializable
+  attribute :polymorphic_attribute,
+    PolymorphicSuperclass,
+    {options},
+    polymorphic: [
+      PolymorphicSubclass1,
+      PolymorphicSubclass2,
+    ] <3>
+  # ...
+
+  xml do
+    map_element "XmlPolymorphicElement", <4>
+      to: :polymorphic_attribute,
+      polymorphic: { <5>
+        # This refers to the polymorphic differentiator attribute in the polymorphic subclass.
+        attribute: :_polymorphic_differentiator, <6>
+        class_map: { <7>
+          "xml-i-am-subclass-1" => "PolymorphicSubclass1",
+          "xml-i-am-subclass-2" => "PolymorphicSubclass2",
+        },
+      }
+  end
+
+  (key_value | key_value_format) do
+    map "KeyValuePolymorphicAttributeName", <8>
+      to: :polymorphic_attribute,
+      polymorphic: { <9>
+        attribute: :_polymorphic_differentiator, <10>
+        class_map: { <11>
+          "keyvalue-i-am-subclass-1" => "PolymorphicSubclass1",
+          "keyvalue-i-am-subclass-2" => "PolymorphicSubclass2",
+        },
+      }
+  end
+
+end
+----
+<1> The name of the XML element or attribute that contains the polymorphic
+differentiator.
+<2> The name of the key-value element that contains the polymorphic
+differentiator.
+<3> Definition of the polymorphic attribute and the polymorphic subclasses in
+the polymorphic attribute class.
+<4> The name of the XML element that contains the polymorphic attributes. This must
+be an element as a polymorphic attribute must be a model.
+<5> The `polymorphic` option on a mapping defines necessary information for
+polymorphic serialization.
+<6> The `attribute:` name of the polymorphic differentiator attribute defined in the
+polymorphic subclass.
+<7> The `class_map:` option that determines the polymorphic subclass to use
+based on the value of the differentiator.
+<8> The name of the key-value format key that contains the polymorphic attributes.
+<9> Same as <5>, but for the key-value format.
+<10> Same as <6>, but for the key-value format.
+<11> Same as <7>, but for the key-value format.
+
+
+[example]
+====
+[source,ruby]
+----
+class Reference < Lutaml::Model::Serializable
+  attribute :name, :string
+end
+
+class DocumentReference < Reference
+  attribute :_class, :string
+  attribute :document_id, :string
+
+  xml do
+    map_element "document_id", to: :document_id
+    map_attribute "reference-type", to: :_class
+  end
+
+  key_value do
+    map "document_id", to: :document_id
+    map "_class", to: :_class
+  end
+end
+
+class AnchorReference < Reference
+  attribute :_class, :string
+  attribute :anchor_id, :string
+
+  xml do
+    map_element "anchor_id", to: :anchor_id
+    map_attribute "reference-type", to: :_class
+  end
+
+  key_value do
+    map "anchor_id", to: :anchor_id
+    map "_class", to: :_class
+  end
+end
+
+class ReferenceSet < Lutaml::Model::Serializable
+  attribute :references, Reference, collection: true, polymorphic: [
+    DocumentReference,
+    AnchorReference,
+  ]
+
+  xml do
+    root "ReferenceSet"
+
+    map_element "reference", to: :references, polymorphic: {
+      # This refers to the attribute in the polymorphic model, you need
+      # to specify the attribute name (which is specified in the sub-classed model).
+      attribute: "_class",
+      class_map: {
+        "document-ref" => "DocumentReference",
+        "anchor-ref" => "AnchorReference",
+      },
+    }
+  end
+
+  key_value do
+    map "references", to: :references, polymorphic: {
+      attribute: "_class",
+      class_map: {
+        "Document" => "DocumentReference",
+        "Anchor" => "AnchorReference",
+      },
+    }
+  end
+end
+----
+
+[source,yaml]
+----
+---
+references:
+- _class: Document
+  name: The Tibetan Book of the Dead
+  document_id: book:tbtd
+- _class: Anchor
+  name: Chapter 1
+  anchor_id: book:tbtd:anchor-1
+----
+
+[source,xml]
+----
+<ReferenceSet>
+  <reference reference-type="document-ref">
+    <name>The Tibetan Book of the Dead</name>
+    <document_id>book:tbtd</document_id>
+  </reference>
+  <reference reference-type="anchor-ref">
+    <name>Chapter 1</name>
+    <anchor_id>book:tbtd:anchor-1</anchor_id>
+  </reference>
+</ReferenceSet>
+----
+====
+
+
+
+=== Collection attributes
+
+Define attributes as collections (arrays or hashes) to store multiple values
+using the `collection` option.
+
+When defining a collection attribute, it is important to understand the default initialization behavior and how to customize it.
+
+By default, collections are initialized as `nil`. However, if you want the collection to be initialized as an empty array, you can use the `initialize_empty: true` option.
+
+`collection` can be set to:
+
+`true`:::
+The attribute contains an unbounded collection of objects of the declared class.
+
+`{min}..{max}`:::
+The attribute contains a collection of objects of the declared class with a
+count within the specified range.
+If the number of objects is out of this numbered range, a
+`CollectionCountOutOfRangeError` will be raised.
++
+[example]
+====
+When set to `0..1`, it means that the attribute is optional, it could be empty
+or contain one object of the declared class.
+====
++
+[example]
+====
+When set to `1..` (equivalent to `1..Infinity`), it means that the
+attribute must contain at least one object of the declared class and can contain
+any number of objects.
+====
++
+[example]
+====
+When set to 5..10` means that there is a minimum of 5 and a maximum of 10
+objects of the declared class. If the count of values for the attribute is less
+then 5 or greater then 10, the `CollectionCountOutOfRangeError` will be raised.
+====
+
+
+Syntax:
+
+[source,ruby]
+----
+attribute :name_of_attribute, Type, collection: true
+attribute :name_of_attribute, Type, collection: {min}..{max}
+attribute :name_of_attribute, Type, collection: {min}..
+----
+
+.Using the `collection` option to define a collection attribute
+[example]
+====
+[source,ruby]
+----
+class Studio < Lutaml::Model::Serializable
+  attribute :location, :string
+  attribute :potters, :string, collection: true
+  attribute :address, :string, collection: 1..2
+  attribute :hobbies, :string, collection: 0..
+end
+----
+
+[source,ruby]
+----
+> Studio.new
+> # address count is `0`, must be between 1 and 2  (Lutaml::Model::CollectionCountOutOfRangeError)
+> Studio.new({ address: ["address 1", "address 2", "address 3"] })
+> # address count is `3`, must be between 1 and 2  (Lutaml::Model::CollectionCountOutOfRangeError)
+> Studio.new({ address: ["address 1"] }).potters
+> # []
+> Studio.new({ address: ["address 1"] }).address
+> # ["address 1"]
+> Studio.new(address: ["address 1"], potters: ['John Doe', 'Jane Doe']).potters
+> # ['John Doe', 'Jane Doe']
+----
+[source,ruby]
+----
+# Default to `nil`
+class SomeModel < Lutaml::Model::Serializable
+  attribute :coll, :string, collection: true
+
+  xml do
+    root "some-model"
+    map_element 'collection', to: :coll
+  end
+
+  key_value do
+    map 'collection', to: coll
+  end
+end
+
+puts SomeModel.new.coll
+# => nil
+
+puts SomeModel.new.to_xml
+# =>
+# <some-model xsi:xmlns="..."><collection xsi:nil="true"/></some-model>
+
+puts SomeModel.new.to_yaml
+# =>
+# ---
+# coll: null
+----
+
+[source,ruby]
+----
+# Default to empty array
+class SomeModel < Lutaml::Model::Serializable
+  attribute :coll, :string, collection: true, initialize_empty: true
+
+  xml do
+    map_element 'collection', to: :coll
+  end
+
+  key_value do
+    map 'collection', to: coll
+  end
+end
+
+puts SomeModel.new.coll
+# => []
+
+puts SomeModel.new.to_xml
+# =>
+# <some-model><collection/></some-model>
+
+puts SomeModel.new.to_yaml
+# =>
+# ---
+# coll: []
+----
+====
+
+
+=== Derived attributes
+
+A derived attribute has a value computed dynamically on evaluation of an
+instance method.
+
+It is defined using the `method:` option along with a mandatory type specification. If the return value is not of the type, it will be casted to the specified type.
+
+Syntax:
+
+[source,ruby]
+----
+attribute :name_of_attribute, Type, method: :instance_method_name
+----
+
+.Defining methods as attributes
+[example]
+====
+[source,ruby]
+----
+class Invoice < Lutaml::Model::Serializable
+  attribute :subtotal, :float
+  attribute :tax, :float
+  attribute :total, :float, method: :total_value
+
+  def total_value
+    subtotal + tax
+  end
+end
+
+i = Invoice.new(subtotal: 100.0, tax: 12.0)
+i.total
+#=> 112.0
+
+puts i.to_yaml
+#=> ---
+#=> subtotal: 100.0
+#=> tax: 12.0
+#=> total: 112.0
+----
+====
+
+
+=== Choice attributes
+
+The `choice` directive allows specifying that elements from the specified range are included.
+
+NOTE: Attribute-level definitions are supported. This can be used with both
+`key_value` and `xml` mappings.
+
+Syntax:
+
+[source,ruby]
+----
+choice(min: {min}, max: {max}) do
+  {block}
+end
+----
+
+Where,
+
+`min`:: The minimum number of elements that must be included. The minimum value can be `0`.
+`max`:: The maximum number of elements that can be included. The maximum value can go up to `Float::INFINITY`.
+`block`:: The block of elements that must be included. The block can contain
+multiple `attribute` and `choice` directives.
+
+.Using the `choice` directive to define a set of attributes with a range
+[example]
+====
+[source,ruby]
+----
+class Studio < Lutaml::Model::Serializable
+  choice(min: 1, max: 3) do
+    choice(min: 1, max: 2) do
+      attribute :prefix, :string
+      attribute :forename, :string
+    end
+
+    attribute :completeName, :string
+  end
+end
+----
+
+This means that the `Studio` class must have at least one and at most three
+attributes.
+
+* The first choice must have at least one and at most two attributes.
+* The second attribute is the `completeName`.
+* The first choice can have either the `prefix` and `forename` attributes or just the `forename` attribute.
+* The last attribute `completeName` is optional.
+====
+
+Choice and sequence can be used together to create complex structures.
+
+.Using `choice` (model-level) and `sequence` (XML-level) directives together
+[example]
+====
+[source,ruby]
+----
+class Person < Lutaml::Model::Serializable
+  attribute :first_name, :string
+  attribute :last_name, :string
+  choice do
+    attribute :age, :integer
+    attribute :dob, :string
+  end
+  choice(min: 1, max: 2) do
+    attribute :email, :string, collection: 0..2
+    attribute :phone, :string, collection: 0..2
+    attribute :address, :string, collection: true
+  end
+
+  xml do
+    element "Person"
+    mixed_content
+    sequence do
+      map_element :FirstName, to: :first_name
+      map_element :LastName, to: :last_name
+      map_element :Age, to: :age
+      map_element :Dob, to: :dob
+      map_element :Email, to: :email
+      map_element :Phone, to: :phone
+      map_element :Address, to: :address
+    end
+  end
+end
+----
+====
+
+
+==== Choosing between Custom Types and Transform Procs
+
+When deciding how to implement value transformations, consider:
+
+**Use Custom Value Type classes when:**
+
+* Bidirectional transformations are needed across formats
+* Format-specific representations are required (XML wants YYYYMMDD, JSON wants DDMMYYYY)
+* The logic will be reused across multiple attributes or models
+* Complex parsing or calculation is involved (e.g., ISO week date calculations)
+* Type safety and encapsulation are important
+
+**Use Attribute-level transform procs when:**
+
+* Same simple transformation applies to ALL serialization formats uniformly
+* Logic is specific to one attribute in one model (non-reusable)
+* Quick inline modification is sufficient
+* No format-specific behavior is needed
+
+**Use Mapping-level transform procs when:**
+
+* Different transformation needed per serialization format
+* One-off, non-reusable transformation
+* Combined with attribute-level transforms for multi-stage processing
+
+See link:../guides/value-transformations[Value Transformations Guide] for complete decision matrix and examples.
+
+NOTE: The `choice` directive can be used with `import_model_attributes`. For more details, see link:../importable_models#import-model-attributes-inside-choice[Using import_model_attributes inside a choice block].