lti_twitter_engine 0.1.0 → 0.1.1

data/test/dummy/config/database.yml

@@ -1,25 +0,0 @@
-# SQLite version 3.x
-#   gem install sqlite3
-#
-#   Ensure the SQLite 3 gem is defined in your Gemfile
-#   gem 'sqlite3'
-development:
-  adapter: sqlite3
-  database: db/development.sqlite3
-  pool: 5
-  timeout: 5000
-
-# Warning: The database defined as "test" will be erased and
-# re-generated from your development database when you run "rake".
-# Do not set this db to the same as development or production.
-test:
-  adapter: sqlite3
-  database: db/test.sqlite3
-  pool: 5
-  timeout: 5000
-
-production:
-  adapter: sqlite3
-  database: db/production.sqlite3
-  pool: 5
-  timeout: 5000

data/test/dummy/config/environment.rb

@@ -1,5 +0,0 @@
-# Load the Rails application.
-require File.expand_path('../application', __FILE__)
-
-# Initialize the Rails application.
-Dummy::Application.initialize!

data/test/dummy/config/environments/development.rb

@@ -1,29 +0,0 @@
-Dummy::Application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # In the development environment your application's code is reloaded on
-  # every request. This slows down response time but is perfect for development
-  # since you don't have to restart the web server when you make code changes.
-  config.cache_classes = false
-
-  # Do not eager load code on boot.
-  config.eager_load = false
-
-  # Show full error reports and disable caching.
-  config.consider_all_requests_local       = true
-  config.action_controller.perform_caching = false
-
-  # Don't care if the mailer can't send.
-  config.action_mailer.raise_delivery_errors = false
-
-  # Print deprecation notices to the Rails logger.
-  config.active_support.deprecation = :log
-
-  # Raise an error on page load if there are pending migrations
-  config.active_record.migration_error = :page_load
-
-  # Debug mode disables concatenation and preprocessing of assets.
-  # This option may cause significant delays in view rendering with a large
-  # number of complex assets.
-  config.assets.debug = true
-end

data/test/dummy/config/environments/production.rb

@@ -1,80 +0,0 @@
-Dummy::Application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # Code is not reloaded between requests.
-  config.cache_classes = true
-
-  # Eager load code on boot. This eager loads most of Rails and
-  # your application in memory, allowing both thread web servers
-  # and those relying on copy on write to perform better.
-  # Rake tasks automatically ignore this option for performance.
-  config.eager_load = true
-
-  # Full error reports are disabled and caching is turned on.
-  config.consider_all_requests_local       = false
-  config.action_controller.perform_caching = true
-
-  # Enable Rack::Cache to put a simple HTTP cache in front of your application
-  # Add `rack-cache` to your Gemfile before enabling this.
-  # For large-scale production use, consider using a caching reverse proxy like nginx, varnish or squid.
-  # config.action_dispatch.rack_cache = true
-
-  # Disable Rails's static asset server (Apache or nginx will already do this).
-  config.serve_static_assets = false
-
-  # Compress JavaScripts and CSS.
-  config.assets.js_compressor = :uglifier
-  # config.assets.css_compressor = :sass
-
-  # Do not fallback to assets pipeline if a precompiled asset is missed.
-  config.assets.compile = false
-
-  # Generate digests for assets URLs.
-  config.assets.digest = true
-
-  # Version of your assets, change this if you want to expire all your assets.
-  config.assets.version = '1.0'
-
-  # Specifies the header that your server uses for sending files.
-  # config.action_dispatch.x_sendfile_header = "X-Sendfile" # for apache
-  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for nginx
-
-  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
-  # config.force_ssl = true
-
-  # Set to :debug to see everything in the log.
-  config.log_level = :info
-
-  # Prepend all log lines with the following tags.
-  # config.log_tags = [ :subdomain, :uuid ]
-
-  # Use a different logger for distributed setups.
-  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
-
-  # Use a different cache store in production.
-  # config.cache_store = :mem_cache_store
-
-  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
-  # config.action_controller.asset_host = "http://assets.example.com"
-
-  # Precompile additional assets.
-  # application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
-  # config.assets.precompile += %w( search.js )
-
-  # Ignore bad email addresses and do not raise email delivery errors.
-  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
-  # config.action_mailer.raise_delivery_errors = false
-
-  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
-  # the I18n.default_locale when a translation can not be found).
-  config.i18n.fallbacks = true
-
-  # Send deprecation notices to registered listeners.
-  config.active_support.deprecation = :notify
-
-  # Disable automatic flushing of the log to improve performance.
-  # config.autoflush_log = false
-
-  # Use default logging formatter so that PID and timestamp are not suppressed.
-  config.log_formatter = ::Logger::Formatter.new
-end

data/test/dummy/config/environments/test.rb

@@ -1,36 +0,0 @@
-Dummy::Application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # The test environment is used exclusively to run your application's
-  # test suite. You never need to work with it otherwise. Remember that
-  # your test database is "scratch space" for the test suite and is wiped
-  # and recreated between test runs. Don't rely on the data there!
-  config.cache_classes = true
-
-  # Do not eager load code on boot. This avoids loading your whole application
-  # just for the purpose of running a single test. If you are using a tool that
-  # preloads Rails for running tests, you may have to set it to true.
-  config.eager_load = false
-
-  # Configure static asset server for tests with Cache-Control for performance.
-  config.serve_static_assets  = true
-  config.static_cache_control = "public, max-age=3600"
-
-  # Show full error reports and disable caching.
-  config.consider_all_requests_local       = true
-  config.action_controller.perform_caching = false
-
-  # Raise exceptions instead of rendering exception templates.
-  config.action_dispatch.show_exceptions = false
-
-  # Disable request forgery protection in test environment.
-  config.action_controller.allow_forgery_protection = false
-
-  # Tell Action Mailer not to deliver emails to the real world.
-  # The :test delivery method accumulates sent emails in the
-  # ActionMailer::Base.deliveries array.
-  config.action_mailer.delivery_method = :test
-
-  # Print deprecation notices to the stderr.
-  config.active_support.deprecation = :stderr
-end

data/test/dummy/config/initializers/backtrace_silencers.rb

@@ -1,7 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
-# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
-
-# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
-# Rails.backtrace_cleaner.remove_silencers!

data/test/dummy/config/initializers/filter_parameter_logging.rb

@@ -1,4 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Configure sensitive parameters which will be filtered from the log file.
-Rails.application.config.filter_parameters += [:password]

data/test/dummy/config/initializers/inflections.rb

@@ -1,16 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Add new inflection rules using the following format. Inflections
-# are locale specific, and you may define rules for as many different
-# locales as you wish. All of these examples are active by default:
-# ActiveSupport::Inflector.inflections(:en) do |inflect|
-#   inflect.plural /^(ox)$/i, '\1en'
-#   inflect.singular /^(ox)en/i, '\1'
-#   inflect.irregular 'person', 'people'
-#   inflect.uncountable %w( fish sheep )
-# end
-
-# These inflection rules are supported but not enabled by default:
-# ActiveSupport::Inflector.inflections(:en) do |inflect|
-#   inflect.acronym 'RESTful'
-# end

data/test/dummy/config/initializers/mime_types.rb

@@ -1,5 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Add new mime types for use in respond_to blocks:
-# Mime::Type.register "text/richtext", :rtf
-# Mime::Type.register_alias "text/html", :iphone

data/test/dummy/config/initializers/secret_token.rb

@@ -1,12 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Your secret key is used for verifying the integrity of signed cookies.
-# If you change this key, all old signed cookies will become invalid!
-
-# Make sure the secret is at least 30 characters and all random,
-# no regular words or you'll be exposed to dictionary attacks.
-# You can use `rake secret` to generate a secure secret key.
-
-# Make sure your secret_key_base is kept private
-# if you're sharing your code publicly.
-Dummy::Application.config.secret_key_base = '1b035d0a93a30138715853c03f7581ad507b8fe6971332fbda6adffd2cca6b02bdf0304e88e1eb119921b32e95127b9b1212f26019be25ad79abe1e1f993ef2d'

data/test/dummy/config/initializers/session_store.rb

@@ -1,3 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-Dummy::Application.config.session_store :cookie_store, key: '_dummy_session'

data/test/dummy/config/initializers/wrap_parameters.rb

@@ -1,14 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# This file contains settings for ActionController::ParamsWrapper which
-# is enabled by default.
-
-# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
-ActiveSupport.on_load(:action_controller) do
-  wrap_parameters format: [:json] if respond_to?(:wrap_parameters)
-end
-
-# To enable root element in JSON for ActiveRecord objects.
-# ActiveSupport.on_load(:active_record) do
-#  self.include_root_in_json = true
-# end

data/test/dummy/config/locales/en.yml

@@ -1,23 +0,0 @@
-# Files in the config/locales directory are used for internationalization
-# and are automatically loaded by Rails. If you want to use locales other
-# than English, add the necessary files in this directory.
-#
-# To use the locales, use `I18n.t`:
-#
-#     I18n.t 'hello'
-#
-# In views, this is aliased to just `t`:
-#
-#     <%= t('hello') %>
-#
-# To use a different locale, set it with `I18n.locale`:
-#
-#     I18n.locale = :es
-#
-# This would use the information in config/locales/es.yml.
-#
-# To learn more, please read the Rails Internationalization guide
-# available at http://guides.rubyonrails.org/i18n.html.
-
-en:
-  hello: "Hello world"

data/test/dummy/config/routes.rb

@@ -1,3 +0,0 @@
-Rails.application.routes.draw do
-  mount InstLtiTwitter::Engine => "/twitter"
-end

data/test/dummy/config.ru

@@ -1,4 +0,0 @@
-# This file is used by Rack-based servers to start the application.
-
-require ::File.expand_path('../config/environment',  __FILE__)
-run Rails.application