loofah-activerecord 1.0.0.beta.1 → 1.0.0

data/rails_test/rails-2.3.8-active_record/public/robots.txt

@@ -1,5 +0,0 @@
-# See http://www.robotstxt.org/wc/norobots.html for documentation on how to use the robots.txt file
-#
-# To ban all spiders from the entire site uncomment the next two lines:
-# User-Agent: *
-# Disallow: /

data/rails_test/rails-2.3.8-active_record/script/about

@@ -1,4 +0,0 @@
-#!/usr/bin/env ruby
-require File.expand_path('../../config/boot',  __FILE__)
-$LOAD_PATH.unshift "#{RAILTIES_PATH}/builtin/rails_info"
-require 'commands/about'

data/rails_test/rails-2.3.8-active_record/script/console

@@ -1,3 +0,0 @@
-#!/usr/bin/env ruby
-require File.expand_path('../../config/boot',  __FILE__)
-require 'commands/console'

data/rails_test/rails-2.3.8-active_record/script/dbconsole

@@ -1,3 +0,0 @@
-#!/usr/bin/env ruby
-require File.expand_path('../../config/boot',  __FILE__)
-require 'commands/dbconsole'

data/rails_test/rails-2.3.8-active_record/script/destroy

@@ -1,3 +0,0 @@
-#!/usr/bin/env ruby
-require File.expand_path('../../config/boot',  __FILE__)
-require 'commands/destroy'

data/rails_test/rails-2.3.8-active_record/script/generate

@@ -1,3 +0,0 @@
-#!/usr/bin/env ruby
-require File.expand_path('../../config/boot',  __FILE__)
-require 'commands/generate'

data/rails_test/rails-2.3.8-active_record/script/performance/benchmarker

@@ -1,3 +0,0 @@
-#!/usr/bin/env ruby
-require File.expand_path('../../../config/boot',  __FILE__)
-require 'commands/performance/benchmarker'

data/rails_test/rails-2.3.8-active_record/script/performance/profiler

@@ -1,3 +0,0 @@
-#!/usr/bin/env ruby
-require File.expand_path('../../../config/boot',  __FILE__)
-require 'commands/performance/profiler'

data/rails_test/rails-2.3.8-active_record/script/plugin

@@ -1,3 +0,0 @@
-#!/usr/bin/env ruby
-require File.expand_path('../../config/boot',  __FILE__)
-require 'commands/plugin'

data/rails_test/rails-2.3.8-active_record/script/runner

@@ -1,3 +0,0 @@
-#!/usr/bin/env ruby
-require File.expand_path('../../config/boot',  __FILE__)
-require 'commands/runner'

data/rails_test/rails-2.3.8-active_record/script/server

@@ -1,3 +0,0 @@
-#!/usr/bin/env ruby
-require File.expand_path('../../config/boot',  __FILE__)
-require 'commands/server'

data/rails_test/rails-2.3.8-active_record/test/performance/browsing_test.rb

@@ -1,9 +0,0 @@
-require 'test_helper'
-require 'performance_test_help'
-
-# Profiling results for each test method are written to tmp/performance.
-class BrowsingTest < ActionController::PerformanceTest
-  def test_homepage
-    get '/'
-  end
-end

data/rails_test/rails-2.3.8-active_record/test/test_helper.rb

@@ -1,38 +0,0 @@
-ENV["RAILS_ENV"] = "test"
-require File.expand_path(File.dirname(__FILE__) + "/../config/environment")
-require 'test_help'
-
-class ActiveSupport::TestCase
-  # Transactional fixtures accelerate your tests by wrapping each test method
-  # in a transaction that's rolled back on completion.  This ensures that the
-  # test database remains unchanged so your fixtures don't have to be reloaded
-  # between every test method.  Fewer database queries means faster tests.
-  #
-  # Read Mike Clark's excellent walkthrough at
-  #   http://clarkware.com/cgi/blosxom/2005/10/24#Rails10FastTesting
-  #
-  # Every Active Record database supports transactions except MyISAM tables
-  # in MySQL.  Turn off transactional fixtures in this case; however, if you
-  # don't care one way or the other, switching from MyISAM to InnoDB tables
-  # is recommended.
-  #
-  # The only drawback to using transactional fixtures is when you actually 
-  # need to test transactions.  Since your test is bracketed by a transaction,
-  # any transactions started in your code will be automatically rolled back.
-  self.use_transactional_fixtures = true
-
-  # Instantiated fixtures are slow, but give you @david where otherwise you
-  # would need people(:david).  If you don't want to migrate your existing
-  # test cases which use the @david style and don't mind the speed hit (each
-  # instantiated fixtures translates to a database query per test method),
-  # then set this back to true.
-  self.use_instantiated_fixtures  = false
-
-  # Setup all fixtures in test/fixtures/*.(yml|csv) for all tests in alphabetical order.
-  #
-  # Note: You'll currently still have to declare fixtures explicitly in integration tests
-  # -- they do not yet inherit this setting
-  fixtures :all
-
-  # Add more helper methods to be used by all tests here...
-end

data/rails_test/rails-2.3.8-active_record/test/unit/posts_test.rb

@@ -1,15 +0,0 @@
-
-require File.join(File.dirname(__FILE__), "../test_helper")
-
-class PostsTest < Test::Unit::TestCase
-  def test_loofah_scrubbing
-    post = Post.new :title => "<script>yo dawg</script>", :body => "<script>omgwtfbbq</script>"
-    post.valid?
-    assert_equal "<script>yo dawg</script>", post.title
-    assert_equal "omgwtfbbq", post.body
-  end
-
-  def test_no_xss_foliation
-    assert ! Post.xss_foliated?
-  end
-end

data/rails_test/rails-2.3.8-xss_foliate/README

@@ -1,243 +0,0 @@
-== Welcome to Rails
-
-Rails is a web-application framework that includes everything needed to create 
-database-backed web applications according to the Model-View-Control pattern. 
-
-This pattern splits the view (also called the presentation) into "dumb" templates
-that are primarily responsible for inserting pre-built data in between HTML tags.
-The model contains the "smart" domain objects (such as Account, Product, Person,
-Post) that holds all the business logic and knows how to persist themselves to
-a database. The controller handles the incoming requests (such as Save New Account,
-Update Product, Show Post) by manipulating the model and directing data to the view.
-
-In Rails, the model is handled by what's called an object-relational mapping
-layer entitled Active Record. This layer allows you to present the data from
-database rows as objects and embellish these data objects with business logic
-methods. You can read more about Active Record in
-link:files/vendor/rails/activerecord/README.html.
-
-The controller and view are handled by the Action Pack, which handles both
-layers by its two parts: Action View and Action Controller. These two layers
-are bundled in a single package due to their heavy interdependence. This is
-unlike the relationship between the Active Record and Action Pack that is much
-more separate. Each of these packages can be used independently outside of
-Rails.  You can read more about Action Pack in
-link:files/vendor/rails/actionpack/README.html.
-
-
-== Getting Started
-
-1. At the command prompt, start a new Rails application using the <tt>rails</tt> command
-   and your application name. Ex: rails myapp
-2. Change directory into myapp and start the web server: <tt>script/server</tt> (run with --help for options)
-3. Go to http://localhost:3000/ and get "Welcome aboard: You're riding the Rails!"
-4. Follow the guidelines to start developing your application
-
-
-== Web Servers
-
-By default, Rails will try to use Mongrel if it's are installed when started with script/server, otherwise Rails will use WEBrick, the webserver that ships with Ruby. But you can also use Rails
-with a variety of other web servers.
-
-Mongrel is a Ruby-based webserver with a C component (which requires compilation) that is
-suitable for development and deployment of Rails applications. If you have Ruby Gems installed,
-getting up and running with mongrel is as easy as: <tt>gem install mongrel</tt>.
-More info at: http://mongrel.rubyforge.org
-
-Say other Ruby web servers like Thin and Ebb or regular web servers like Apache or LiteSpeed or
-Lighttpd or IIS. The Ruby web servers are run through Rack and the latter can either be setup to use
-FCGI or proxy to a pack of Mongrels/Thin/Ebb servers.
-
-== Apache .htaccess example for FCGI/CGI
-
-# General Apache options
-AddHandler fastcgi-script .fcgi
-AddHandler cgi-script .cgi
-Options +FollowSymLinks +ExecCGI
-
-# If you don't want Rails to look in certain directories,
-# use the following rewrite rules so that Apache won't rewrite certain requests
-# 
-# Example:
-#   RewriteCond %{REQUEST_URI} ^/notrails.*
-#   RewriteRule .* - [L]
-
-# Redirect all requests not available on the filesystem to Rails
-# By default the cgi dispatcher is used which is very slow
-# 
-# For better performance replace the dispatcher with the fastcgi one
-#
-# Example:
-#   RewriteRule ^(.*)$ dispatch.fcgi [QSA,L]
-RewriteEngine On
-
-# If your Rails application is accessed via an Alias directive,
-# then you MUST also set the RewriteBase in this htaccess file.
-#
-# Example:
-#   Alias /myrailsapp /path/to/myrailsapp/public
-#   RewriteBase /myrailsapp
-
-RewriteRule ^$ index.html [QSA]
-RewriteRule ^([^.]+)$ $1.html [QSA]
-RewriteCond %{REQUEST_FILENAME} !-f
-RewriteRule ^(.*)$ dispatch.cgi [QSA,L]
-
-# In case Rails experiences terminal errors
-# Instead of displaying this message you can supply a file here which will be rendered instead
-# 
-# Example:
-#   ErrorDocument 500 /500.html
-
-ErrorDocument 500 "<h2>Application error</h2>Rails application failed to start properly"
-
-
-== Debugging Rails
-
-Sometimes your application goes wrong.  Fortunately there are a lot of tools that
-will help you debug it and get it back on the rails.
-
-First area to check is the application log files.  Have "tail -f" commands running
-on the server.log and development.log. Rails will automatically display debugging
-and runtime information to these files. Debugging info will also be shown in the
-browser on requests from 127.0.0.1.
-
-You can also log your own messages directly into the log file from your code using
-the Ruby logger class from inside your controllers. Example:
-
-  class WeblogController < ActionController::Base
-    def destroy
-      @weblog = Weblog.find(params[:id])
-      @weblog.destroy
-      logger.info("#{Time.now} Destroyed Weblog ID ##{@weblog.id}!")
-    end
-  end
-
-The result will be a message in your log file along the lines of:
-
-  Mon Oct 08 14:22:29 +1000 2007 Destroyed Weblog ID #1
-
-More information on how to use the logger is at http://www.ruby-doc.org/core/
-
-Also, Ruby documentation can be found at http://www.ruby-lang.org/ including:
-
-* The Learning Ruby (Pickaxe) Book: http://www.ruby-doc.org/docs/ProgrammingRuby/
-* Learn to Program: http://pine.fm/LearnToProgram/  (a beginners guide)
-
-These two online (and free) books will bring you up to speed on the Ruby language
-and also on programming in general.
-
-
-== Debugger
-
-Debugger support is available through the debugger command when you start your Mongrel or
-Webrick server with --debugger. This means that you can break out of execution at any point
-in the code, investigate and change the model, AND then resume execution! 
-You need to install ruby-debug to run the server in debugging mode. With gems, use 'gem install ruby-debug'
-Example:
-
-  class WeblogController < ActionController::Base
-    def index
-      @posts = Post.find(:all)
-      debugger
-    end
-  end
-
-So the controller will accept the action, run the first line, then present you
-with a IRB prompt in the server window. Here you can do things like:
-
-  >> @posts.inspect
-  => "[#<Post:0x14a6be8 @attributes={\"title\"=>nil, \"body\"=>nil, \"id\"=>\"1\"}>,
-       #<Post:0x14a6620 @attributes={\"title\"=>\"Rails you know!\", \"body\"=>\"Only ten..\", \"id\"=>\"2\"}>]"
-  >> @posts.first.title = "hello from a debugger"
-  => "hello from a debugger"
-
-...and even better is that you can examine how your runtime objects actually work:
-
-  >> f = @posts.first
-  => #<Post:0x13630c4 @attributes={"title"=>nil, "body"=>nil, "id"=>"1"}>
-  >> f.
-  Display all 152 possibilities? (y or n)
-
-Finally, when you're ready to resume execution, you enter "cont"
-
-
-== Console
-
-You can interact with the domain model by starting the console through <tt>script/console</tt>.
-Here you'll have all parts of the application configured, just like it is when the
-application is running. You can inspect domain models, change values, and save to the
-database. Starting the script without arguments will launch it in the development environment.
-Passing an argument will specify a different environment, like <tt>script/console production</tt>.
-
-To reload your controllers and models after launching the console run <tt>reload!</tt>
-
-== dbconsole
-
-You can go to the command line of your database directly through <tt>script/dbconsole</tt>.
-You would be connected to the database with the credentials defined in database.yml.
-Starting the script without arguments will connect you to the development database. Passing an
-argument will connect you to a different database, like <tt>script/dbconsole production</tt>.
-Currently works for mysql, postgresql and sqlite.
-
-== Description of Contents
-
-app
-  Holds all the code that's specific to this particular application.
-
-app/controllers
-  Holds controllers that should be named like weblogs_controller.rb for
-  automated URL mapping. All controllers should descend from ApplicationController
-  which itself descends from ActionController::Base.
-
-app/models
-  Holds models that should be named like post.rb.
-  Most models will descend from ActiveRecord::Base.
-
-app/views
-  Holds the template files for the view that should be named like
-  weblogs/index.html.erb for the WeblogsController#index action. All views use eRuby
-  syntax.
-
-app/views/layouts
-  Holds the template files for layouts to be used with views. This models the common
-  header/footer method of wrapping views. In your views, define a layout using the
-  <tt>layout :default</tt> and create a file named default.html.erb. Inside default.html.erb,
-  call <% yield %> to render the view using this layout.
-
-app/helpers
-  Holds view helpers that should be named like weblogs_helper.rb. These are generated
-  for you automatically when using script/generate for controllers. Helpers can be used to
-  wrap functionality for your views into methods.
-
-config
-  Configuration files for the Rails environment, the routing map, the database, and other dependencies.
-
-db
-  Contains the database schema in schema.rb.  db/migrate contains all
-  the sequence of Migrations for your schema.
-
-doc
-  This directory is where your application documentation will be stored when generated
-  using <tt>rake doc:app</tt>
-
-lib
-  Application specific libraries. Basically, any kind of custom code that doesn't
-  belong under controllers, models, or helpers. This directory is in the load path.
-
-public
-  The directory available for the web server. Contains subdirectories for images, stylesheets,
-  and javascripts. Also contains the dispatchers and the default HTML files. This should be
-  set as the DOCUMENT_ROOT of your web server.
-
-script
-  Helper scripts for automation and generation.
-
-test
-  Unit and functional tests along with fixtures. When using the script/generate scripts, template
-  test files will be generated for you and placed in this directory.
-
-vendor
-  External libraries that the application depends on. Also includes the plugins subdirectory.
-  If the app has frozen rails, those gems also go here, under vendor/rails/.
-  This directory is in the load path.

data/rails_test/rails-2.3.8-xss_foliate/Rakefile

@@ -1,10 +0,0 @@
-# Add your own tasks in files placed in lib/tasks ending in .rake,
-# for example lib/tasks/capistrano.rake, and they will automatically be available to Rake.
-
-require(File.join(File.dirname(__FILE__), 'config', 'boot'))
-
-require 'rake'
-require 'rake/testtask'
-require 'rake/rdoctask'
-
-require 'tasks/rails'

data/rails_test/rails-2.3.8-xss_foliate/app/controllers/application_controller.rb

@@ -1,10 +0,0 @@
-# Filters added to this controller apply to all controllers in the application.
-# Likewise, all the methods added will be available for all controllers.
-
-class ApplicationController < ActionController::Base
-  helper :all # include all helpers, all the time
-  protect_from_forgery # See ActionController::RequestForgeryProtection for details
-
-  # Scrub sensitive parameters from your log
-  # filter_parameter_logging :password
-end

data/rails_test/rails-2.3.8-xss_foliate/app/helpers/application_helper.rb

@@ -1,3 +0,0 @@
-# Methods added to this helper will be available to all templates in the application.
-module ApplicationHelper
-end

data/rails_test/rails-2.3.8-xss_foliate/app/models/post.rb

@@ -1,2 +0,0 @@
-class Post < ActiveRecord::Base
-end

data/rails_test/rails-2.3.8-xss_foliate/config/boot.rb

@@ -1,110 +0,0 @@
-# Don't change this file!
-# Configure your app in config/environment.rb and config/environments/*.rb
-
-RAILS_ROOT = "#{File.dirname(__FILE__)}/.." unless defined?(RAILS_ROOT)
-
-module Rails
-  class << self
-    def boot!
-      unless booted?
-        preinitialize
-        pick_boot.run
-      end
-    end
-
-    def booted?
-      defined? Rails::Initializer
-    end
-
-    def pick_boot
-      (vendor_rails? ? VendorBoot : GemBoot).new
-    end
-
-    def vendor_rails?
-      File.exist?("#{RAILS_ROOT}/vendor/rails")
-    end
-
-    def preinitialize
-      load(preinitializer_path) if File.exist?(preinitializer_path)
-    end
-
-    def preinitializer_path
-      "#{RAILS_ROOT}/config/preinitializer.rb"
-    end
-  end
-
-  class Boot
-    def run
-      load_initializer
-      Rails::Initializer.run(:set_load_path)
-    end
-  end
-
-  class VendorBoot < Boot
-    def load_initializer
-      require "#{RAILS_ROOT}/vendor/rails/railties/lib/initializer"
-      Rails::Initializer.run(:install_gem_spec_stubs)
-      Rails::GemDependency.add_frozen_gem_path
-    end
-  end
-
-  class GemBoot < Boot
-    def load_initializer
-      self.class.load_rubygems
-      load_rails_gem
-      require 'initializer'
-    end
-
-    def load_rails_gem
-      if version = self.class.gem_version
-        gem 'rails', version
-      else
-        gem 'rails'
-      end
-    rescue Gem::LoadError => load_error
-      $stderr.puts %(Missing the Rails #{version} gem. Please `gem install -v=#{version} rails`, update your RAILS_GEM_VERSION setting in config/environment.rb for the Rails version you do have installed, or comment out RAILS_GEM_VERSION to use the latest version installed.)
-      exit 1
-    end
-
-    class << self
-      def rubygems_version
-        Gem::RubyGemsVersion rescue nil
-      end
-
-      def gem_version
-        if defined? RAILS_GEM_VERSION
-          RAILS_GEM_VERSION
-        elsif ENV.include?('RAILS_GEM_VERSION')
-          ENV['RAILS_GEM_VERSION']
-        else
-          parse_gem_version(read_environment_rb)
-        end
-      end
-
-      def load_rubygems
-        min_version = '1.3.2'
-        require 'rubygems'
-        unless rubygems_version >= min_version
-          $stderr.puts %Q(Rails requires RubyGems >= #{min_version} (you have #{rubygems_version}). Please `gem update --system` and try again.)
-          exit 1
-        end
-
-      rescue LoadError
-        $stderr.puts %Q(Rails requires RubyGems >= #{min_version}. Please install RubyGems and try again: http://rubygems.rubyforge.org)
-        exit 1
-      end
-
-      def parse_gem_version(text)
-        $1 if text =~ /^[^#]*RAILS_GEM_VERSION\s*=\s*["']([!~<>=]*\s*[\d.]+)["']/
-      end
-
-      private
-        def read_environment_rb
-          File.read("#{RAILS_ROOT}/config/environment.rb")
-        end
-    end
-  end
-end
-
-# All that for this:
-Rails.boot!