loofah-activerecord 1.0.0.beta.1

data/rails_test/rails-2.3.8-active_record/public/robots.txt

@@ -0,0 +1,5 @@
+# See http://www.robotstxt.org/wc/norobots.html for documentation on how to use the robots.txt file
+#
+# To ban all spiders from the entire site uncomment the next two lines:
+# User-Agent: *
+# Disallow: /

data/rails_test/rails-2.3.8-active_record/script/about

@@ -0,0 +1,4 @@
+#!/usr/bin/env ruby
+require File.expand_path('../../config/boot',  __FILE__)
+$LOAD_PATH.unshift "#{RAILTIES_PATH}/builtin/rails_info"
+require 'commands/about'

data/rails_test/rails-2.3.8-active_record/script/console

@@ -0,0 +1,3 @@
+#!/usr/bin/env ruby
+require File.expand_path('../../config/boot',  __FILE__)
+require 'commands/console'

data/rails_test/rails-2.3.8-active_record/script/dbconsole

@@ -0,0 +1,3 @@
+#!/usr/bin/env ruby
+require File.expand_path('../../config/boot',  __FILE__)
+require 'commands/dbconsole'

data/rails_test/rails-2.3.8-active_record/script/destroy

@@ -0,0 +1,3 @@
+#!/usr/bin/env ruby
+require File.expand_path('../../config/boot',  __FILE__)
+require 'commands/destroy'

data/rails_test/rails-2.3.8-active_record/script/generate

@@ -0,0 +1,3 @@
+#!/usr/bin/env ruby
+require File.expand_path('../../config/boot',  __FILE__)
+require 'commands/generate'

data/rails_test/rails-2.3.8-active_record/script/performance/benchmarker

@@ -0,0 +1,3 @@
+#!/usr/bin/env ruby
+require File.expand_path('../../../config/boot',  __FILE__)
+require 'commands/performance/benchmarker'

data/rails_test/rails-2.3.8-active_record/script/performance/profiler

@@ -0,0 +1,3 @@
+#!/usr/bin/env ruby
+require File.expand_path('../../../config/boot',  __FILE__)
+require 'commands/performance/profiler'

data/rails_test/rails-2.3.8-active_record/script/plugin

@@ -0,0 +1,3 @@
+#!/usr/bin/env ruby
+require File.expand_path('../../config/boot',  __FILE__)
+require 'commands/plugin'

data/rails_test/rails-2.3.8-active_record/script/runner

@@ -0,0 +1,3 @@
+#!/usr/bin/env ruby
+require File.expand_path('../../config/boot',  __FILE__)
+require 'commands/runner'

data/rails_test/rails-2.3.8-active_record/script/server

@@ -0,0 +1,3 @@
+#!/usr/bin/env ruby
+require File.expand_path('../../config/boot',  __FILE__)
+require 'commands/server'

data/rails_test/rails-2.3.8-active_record/test/performance/browsing_test.rb

@@ -0,0 +1,9 @@
+require 'test_helper'
+require 'performance_test_help'
+
+# Profiling results for each test method are written to tmp/performance.
+class BrowsingTest < ActionController::PerformanceTest
+  def test_homepage
+    get '/'
+  end
+end

data/rails_test/rails-2.3.8-active_record/test/test_helper.rb

@@ -0,0 +1,38 @@
+ENV["RAILS_ENV"] = "test"
+require File.expand_path(File.dirname(__FILE__) + "/../config/environment")
+require 'test_help'
+
+class ActiveSupport::TestCase
+  # Transactional fixtures accelerate your tests by wrapping each test method
+  # in a transaction that's rolled back on completion.  This ensures that the
+  # test database remains unchanged so your fixtures don't have to be reloaded
+  # between every test method.  Fewer database queries means faster tests.
+  #
+  # Read Mike Clark's excellent walkthrough at
+  #   http://clarkware.com/cgi/blosxom/2005/10/24#Rails10FastTesting
+  #
+  # Every Active Record database supports transactions except MyISAM tables
+  # in MySQL.  Turn off transactional fixtures in this case; however, if you
+  # don't care one way or the other, switching from MyISAM to InnoDB tables
+  # is recommended.
+  #
+  # The only drawback to using transactional fixtures is when you actually 
+  # need to test transactions.  Since your test is bracketed by a transaction,
+  # any transactions started in your code will be automatically rolled back.
+  self.use_transactional_fixtures = true
+
+  # Instantiated fixtures are slow, but give you @david where otherwise you
+  # would need people(:david).  If you don't want to migrate your existing
+  # test cases which use the @david style and don't mind the speed hit (each
+  # instantiated fixtures translates to a database query per test method),
+  # then set this back to true.
+  self.use_instantiated_fixtures  = false
+
+  # Setup all fixtures in test/fixtures/*.(yml|csv) for all tests in alphabetical order.
+  #
+  # Note: You'll currently still have to declare fixtures explicitly in integration tests
+  # -- they do not yet inherit this setting
+  fixtures :all
+
+  # Add more helper methods to be used by all tests here...
+end

data/rails_test/rails-2.3.8-active_record/test/unit/posts_test.rb

@@ -0,0 +1,15 @@
+
+require File.join(File.dirname(__FILE__), "../test_helper")
+
+class PostsTest < Test::Unit::TestCase
+  def test_loofah_scrubbing
+    post = Post.new :title => "<script>yo dawg</script>", :body => "<script>omgwtfbbq</script>"
+    post.valid?
+    assert_equal "<script>yo dawg</script>", post.title
+    assert_equal "omgwtfbbq", post.body
+  end
+
+  def test_no_xss_foliation
+    assert ! Post.xss_foliated?
+  end
+end

data/rails_test/rails-2.3.8-xss_foliate/README

@@ -0,0 +1,243 @@
+== Welcome to Rails
+
+Rails is a web-application framework that includes everything needed to create 
+database-backed web applications according to the Model-View-Control pattern. 
+
+This pattern splits the view (also called the presentation) into "dumb" templates
+that are primarily responsible for inserting pre-built data in between HTML tags.
+The model contains the "smart" domain objects (such as Account, Product, Person,
+Post) that holds all the business logic and knows how to persist themselves to
+a database. The controller handles the incoming requests (such as Save New Account,
+Update Product, Show Post) by manipulating the model and directing data to the view.
+
+In Rails, the model is handled by what's called an object-relational mapping
+layer entitled Active Record. This layer allows you to present the data from
+database rows as objects and embellish these data objects with business logic
+methods. You can read more about Active Record in
+link:files/vendor/rails/activerecord/README.html.
+
+The controller and view are handled by the Action Pack, which handles both
+layers by its two parts: Action View and Action Controller. These two layers
+are bundled in a single package due to their heavy interdependence. This is
+unlike the relationship between the Active Record and Action Pack that is much
+more separate. Each of these packages can be used independently outside of
+Rails.  You can read more about Action Pack in
+link:files/vendor/rails/actionpack/README.html.
+
+
+== Getting Started
+
+1. At the command prompt, start a new Rails application using the <tt>rails</tt> command
+   and your application name. Ex: rails myapp
+2. Change directory into myapp and start the web server: <tt>script/server</tt> (run with --help for options)
+3. Go to http://localhost:3000/ and get "Welcome aboard: You're riding the Rails!"
+4. Follow the guidelines to start developing your application
+
+
+== Web Servers
+
+By default, Rails will try to use Mongrel if it's are installed when started with script/server, otherwise Rails will use WEBrick, the webserver that ships with Ruby. But you can also use Rails
+with a variety of other web servers.
+
+Mongrel is a Ruby-based webserver with a C component (which requires compilation) that is
+suitable for development and deployment of Rails applications. If you have Ruby Gems installed,
+getting up and running with mongrel is as easy as: <tt>gem install mongrel</tt>.
+More info at: http://mongrel.rubyforge.org
+
+Say other Ruby web servers like Thin and Ebb or regular web servers like Apache or LiteSpeed or
+Lighttpd or IIS. The Ruby web servers are run through Rack and the latter can either be setup to use
+FCGI or proxy to a pack of Mongrels/Thin/Ebb servers.
+
+== Apache .htaccess example for FCGI/CGI
+
+# General Apache options
+AddHandler fastcgi-script .fcgi
+AddHandler cgi-script .cgi
+Options +FollowSymLinks +ExecCGI
+
+# If you don't want Rails to look in certain directories,
+# use the following rewrite rules so that Apache won't rewrite certain requests
+# 
+# Example:
+#   RewriteCond %{REQUEST_URI} ^/notrails.*
+#   RewriteRule .* - [L]
+
+# Redirect all requests not available on the filesystem to Rails
+# By default the cgi dispatcher is used which is very slow
+# 
+# For better performance replace the dispatcher with the fastcgi one
+#
+# Example:
+#   RewriteRule ^(.*)$ dispatch.fcgi [QSA,L]
+RewriteEngine On
+
+# If your Rails application is accessed via an Alias directive,
+# then you MUST also set the RewriteBase in this htaccess file.
+#
+# Example:
+#   Alias /myrailsapp /path/to/myrailsapp/public
+#   RewriteBase /myrailsapp
+
+RewriteRule ^$ index.html [QSA]
+RewriteRule ^([^.]+)$ $1.html [QSA]
+RewriteCond %{REQUEST_FILENAME} !-f
+RewriteRule ^(.*)$ dispatch.cgi [QSA,L]
+
+# In case Rails experiences terminal errors
+# Instead of displaying this message you can supply a file here which will be rendered instead
+# 
+# Example:
+#   ErrorDocument 500 /500.html
+
+ErrorDocument 500 "<h2>Application error</h2>Rails application failed to start properly"
+
+
+== Debugging Rails
+
+Sometimes your application goes wrong.  Fortunately there are a lot of tools that
+will help you debug it and get it back on the rails.
+
+First area to check is the application log files.  Have "tail -f" commands running
+on the server.log and development.log. Rails will automatically display debugging
+and runtime information to these files. Debugging info will also be shown in the
+browser on requests from 127.0.0.1.
+
+You can also log your own messages directly into the log file from your code using
+the Ruby logger class from inside your controllers. Example:
+
+  class WeblogController < ActionController::Base
+    def destroy
+      @weblog = Weblog.find(params[:id])
+      @weblog.destroy
+      logger.info("#{Time.now} Destroyed Weblog ID ##{@weblog.id}!")
+    end
+  end
+
+The result will be a message in your log file along the lines of:
+
+  Mon Oct 08 14:22:29 +1000 2007 Destroyed Weblog ID #1
+
+More information on how to use the logger is at http://www.ruby-doc.org/core/
+
+Also, Ruby documentation can be found at http://www.ruby-lang.org/ including:
+
+* The Learning Ruby (Pickaxe) Book: http://www.ruby-doc.org/docs/ProgrammingRuby/
+* Learn to Program: http://pine.fm/LearnToProgram/  (a beginners guide)
+
+These two online (and free) books will bring you up to speed on the Ruby language
+and also on programming in general.
+
+
+== Debugger
+
+Debugger support is available through the debugger command when you start your Mongrel or
+Webrick server with --debugger. This means that you can break out of execution at any point
+in the code, investigate and change the model, AND then resume execution! 
+You need to install ruby-debug to run the server in debugging mode. With gems, use 'gem install ruby-debug'
+Example:
+
+  class WeblogController < ActionController::Base
+    def index
+      @posts = Post.find(:all)
+      debugger
+    end
+  end
+
+So the controller will accept the action, run the first line, then present you
+with a IRB prompt in the server window. Here you can do things like:
+
+  >> @posts.inspect
+  => "[#<Post:0x14a6be8 @attributes={\"title\"=>nil, \"body\"=>nil, \"id\"=>\"1\"}>,
+       #<Post:0x14a6620 @attributes={\"title\"=>\"Rails you know!\", \"body\"=>\"Only ten..\", \"id\"=>\"2\"}>]"
+  >> @posts.first.title = "hello from a debugger"
+  => "hello from a debugger"
+
+...and even better is that you can examine how your runtime objects actually work:
+
+  >> f = @posts.first
+  => #<Post:0x13630c4 @attributes={"title"=>nil, "body"=>nil, "id"=>"1"}>
+  >> f.
+  Display all 152 possibilities? (y or n)
+
+Finally, when you're ready to resume execution, you enter "cont"
+
+
+== Console
+
+You can interact with the domain model by starting the console through <tt>script/console</tt>.
+Here you'll have all parts of the application configured, just like it is when the
+application is running. You can inspect domain models, change values, and save to the
+database. Starting the script without arguments will launch it in the development environment.
+Passing an argument will specify a different environment, like <tt>script/console production</tt>.
+
+To reload your controllers and models after launching the console run <tt>reload!</tt>
+
+== dbconsole
+
+You can go to the command line of your database directly through <tt>script/dbconsole</tt>.
+You would be connected to the database with the credentials defined in database.yml.
+Starting the script without arguments will connect you to the development database. Passing an
+argument will connect you to a different database, like <tt>script/dbconsole production</tt>.
+Currently works for mysql, postgresql and sqlite.
+
+== Description of Contents
+
+app
+  Holds all the code that's specific to this particular application.
+
+app/controllers
+  Holds controllers that should be named like weblogs_controller.rb for
+  automated URL mapping. All controllers should descend from ApplicationController
+  which itself descends from ActionController::Base.
+
+app/models
+  Holds models that should be named like post.rb.
+  Most models will descend from ActiveRecord::Base.
+
+app/views
+  Holds the template files for the view that should be named like
+  weblogs/index.html.erb for the WeblogsController#index action. All views use eRuby
+  syntax.
+
+app/views/layouts
+  Holds the template files for layouts to be used with views. This models the common
+  header/footer method of wrapping views. In your views, define a layout using the
+  <tt>layout :default</tt> and create a file named default.html.erb. Inside default.html.erb,
+  call <% yield %> to render the view using this layout.
+
+app/helpers
+  Holds view helpers that should be named like weblogs_helper.rb. These are generated
+  for you automatically when using script/generate for controllers. Helpers can be used to
+  wrap functionality for your views into methods.
+
+config
+  Configuration files for the Rails environment, the routing map, the database, and other dependencies.
+
+db
+  Contains the database schema in schema.rb.  db/migrate contains all
+  the sequence of Migrations for your schema.
+
+doc
+  This directory is where your application documentation will be stored when generated
+  using <tt>rake doc:app</tt>
+
+lib
+  Application specific libraries. Basically, any kind of custom code that doesn't
+  belong under controllers, models, or helpers. This directory is in the load path.
+
+public
+  The directory available for the web server. Contains subdirectories for images, stylesheets,
+  and javascripts. Also contains the dispatchers and the default HTML files. This should be
+  set as the DOCUMENT_ROOT of your web server.
+
+script
+  Helper scripts for automation and generation.
+
+test
+  Unit and functional tests along with fixtures. When using the script/generate scripts, template
+  test files will be generated for you and placed in this directory.
+
+vendor
+  External libraries that the application depends on. Also includes the plugins subdirectory.
+  If the app has frozen rails, those gems also go here, under vendor/rails/.
+  This directory is in the load path.

data/rails_test/rails-2.3.8-xss_foliate/Rakefile

@@ -0,0 +1,10 @@
+# Add your own tasks in files placed in lib/tasks ending in .rake,
+# for example lib/tasks/capistrano.rake, and they will automatically be available to Rake.
+
+require(File.join(File.dirname(__FILE__), 'config', 'boot'))
+
+require 'rake'
+require 'rake/testtask'
+require 'rake/rdoctask'
+
+require 'tasks/rails'

data/rails_test/rails-2.3.8-xss_foliate/app/controllers/application_controller.rb

@@ -0,0 +1,10 @@
+# Filters added to this controller apply to all controllers in the application.
+# Likewise, all the methods added will be available for all controllers.
+
+class ApplicationController < ActionController::Base
+  helper :all # include all helpers, all the time
+  protect_from_forgery # See ActionController::RequestForgeryProtection for details
+
+  # Scrub sensitive parameters from your log
+  # filter_parameter_logging :password
+end

data/rails_test/rails-2.3.8-xss_foliate/app/helpers/application_helper.rb

@@ -0,0 +1,3 @@
+# Methods added to this helper will be available to all templates in the application.
+module ApplicationHelper
+end

data/rails_test/rails-2.3.8-xss_foliate/app/models/post.rb

@@ -0,0 +1,2 @@
+class Post < ActiveRecord::Base
+end

data/rails_test/rails-2.3.8-xss_foliate/config/boot.rb

@@ -0,0 +1,110 @@
+# Don't change this file!
+# Configure your app in config/environment.rb and config/environments/*.rb
+
+RAILS_ROOT = "#{File.dirname(__FILE__)}/.." unless defined?(RAILS_ROOT)
+
+module Rails
+  class << self
+    def boot!
+      unless booted?
+        preinitialize
+        pick_boot.run
+      end
+    end
+
+    def booted?
+      defined? Rails::Initializer
+    end
+
+    def pick_boot
+      (vendor_rails? ? VendorBoot : GemBoot).new
+    end
+
+    def vendor_rails?
+      File.exist?("#{RAILS_ROOT}/vendor/rails")
+    end
+
+    def preinitialize
+      load(preinitializer_path) if File.exist?(preinitializer_path)
+    end
+
+    def preinitializer_path
+      "#{RAILS_ROOT}/config/preinitializer.rb"
+    end
+  end
+
+  class Boot
+    def run
+      load_initializer
+      Rails::Initializer.run(:set_load_path)
+    end
+  end
+
+  class VendorBoot < Boot
+    def load_initializer
+      require "#{RAILS_ROOT}/vendor/rails/railties/lib/initializer"
+      Rails::Initializer.run(:install_gem_spec_stubs)
+      Rails::GemDependency.add_frozen_gem_path
+    end
+  end
+
+  class GemBoot < Boot
+    def load_initializer
+      self.class.load_rubygems
+      load_rails_gem
+      require 'initializer'
+    end
+
+    def load_rails_gem
+      if version = self.class.gem_version
+        gem 'rails', version
+      else
+        gem 'rails'
+      end
+    rescue Gem::LoadError => load_error
+      $stderr.puts %(Missing the Rails #{version} gem. Please `gem install -v=#{version} rails`, update your RAILS_GEM_VERSION setting in config/environment.rb for the Rails version you do have installed, or comment out RAILS_GEM_VERSION to use the latest version installed.)
+      exit 1
+    end
+
+    class << self
+      def rubygems_version
+        Gem::RubyGemsVersion rescue nil
+      end
+
+      def gem_version
+        if defined? RAILS_GEM_VERSION
+          RAILS_GEM_VERSION
+        elsif ENV.include?('RAILS_GEM_VERSION')
+          ENV['RAILS_GEM_VERSION']
+        else
+          parse_gem_version(read_environment_rb)
+        end
+      end
+
+      def load_rubygems
+        min_version = '1.3.2'
+        require 'rubygems'
+        unless rubygems_version >= min_version
+          $stderr.puts %Q(Rails requires RubyGems >= #{min_version} (you have #{rubygems_version}). Please `gem update --system` and try again.)
+          exit 1
+        end
+
+      rescue LoadError
+        $stderr.puts %Q(Rails requires RubyGems >= #{min_version}. Please install RubyGems and try again: http://rubygems.rubyforge.org)
+        exit 1
+      end
+
+      def parse_gem_version(text)
+        $1 if text =~ /^[^#]*RAILS_GEM_VERSION\s*=\s*["']([!~<>=]*\s*[\d.]+)["']/
+      end
+
+      private
+        def read_environment_rb
+          File.read("#{RAILS_ROOT}/config/environment.rb")
+        end
+    end
+  end
+end
+
+# All that for this:
+Rails.boot!