logstash-output-scalyr 0.1.5 → 0.1.10.beta

data/vendor/bundle/jruby/2.5.0/gems/concurrent-ruby-1.1.6/lib/concurrent-ruby/concurrent/atomic/mutex_count_down_latch.rb

@@ -1,44 +0,0 @@
-require 'concurrent/synchronization'
-require 'concurrent/utility/native_integer'
-
-module Concurrent
-
-  # @!macro count_down_latch
-  # @!visibility private
-  # @!macro internal_implementation_note
-  class MutexCountDownLatch < Synchronization::LockableObject
-
-    # @!macro count_down_latch_method_initialize
-    def initialize(count = 1)
-      Utility::NativeInteger.ensure_integer_and_bounds count
-      Utility::NativeInteger.ensure_positive count
-
-      super()
-      synchronize { ns_initialize count }
-    end
-
-    # @!macro count_down_latch_method_wait
-    def wait(timeout = nil)
-      synchronize { ns_wait_until(timeout) { @count == 0 } }
-    end
-
-    # @!macro count_down_latch_method_count_down
-    def count_down
-      synchronize do
-        @count -= 1 if @count > 0
-        ns_broadcast if @count == 0
-      end
-    end
-
-    # @!macro count_down_latch_method_count
-    def count
-      synchronize { @count }
-    end
-
-    protected
-
-    def ns_initialize(count)
-      @count = count
-    end
-  end
-end

data/vendor/bundle/jruby/2.5.0/gems/concurrent-ruby-1.1.6/lib/concurrent-ruby/concurrent/atomic/mutex_semaphore.rb

@@ -1,115 +0,0 @@
-require 'concurrent/synchronization'
-require 'concurrent/utility/native_integer'
-
-module Concurrent
-
-  # @!macro semaphore
-  # @!visibility private
-  # @!macro internal_implementation_note
-  class MutexSemaphore < Synchronization::LockableObject
-
-    # @!macro semaphore_method_initialize
-    def initialize(count)
-      Utility::NativeInteger.ensure_integer_and_bounds count
-
-      super()
-      synchronize { ns_initialize count }
-    end
-
-    # @!macro semaphore_method_acquire
-    def acquire(permits = 1)
-      Utility::NativeInteger.ensure_integer_and_bounds permits
-      Utility::NativeInteger.ensure_positive permits
-
-      synchronize do
-        try_acquire_timed(permits, nil)
-        nil
-      end
-    end
-
-    # @!macro semaphore_method_available_permits
-    def available_permits
-      synchronize { @free }
-    end
-
-    # @!macro semaphore_method_drain_permits
-    #
-    #   Acquires and returns all permits that are immediately available.
-    #
-    #   @return [Integer]
-    def drain_permits
-      synchronize do
-        @free.tap { |_| @free = 0 }
-      end
-    end
-
-    # @!macro semaphore_method_try_acquire
-    def try_acquire(permits = 1, timeout = nil)
-      Utility::NativeInteger.ensure_integer_and_bounds permits
-      Utility::NativeInteger.ensure_positive permits
-
-      synchronize do
-        if timeout.nil?
-          try_acquire_now(permits)
-        else
-          try_acquire_timed(permits, timeout)
-        end
-      end
-    end
-
-    # @!macro semaphore_method_release
-    def release(permits = 1)
-      Utility::NativeInteger.ensure_integer_and_bounds permits
-      Utility::NativeInteger.ensure_positive permits
-
-      synchronize do
-        @free += permits
-        permits.times { ns_signal }
-      end
-      nil
-    end
-
-    # Shrinks the number of available permits by the indicated reduction.
-    #
-    # @param [Fixnum] reduction Number of permits to remove.
-    #
-    # @raise [ArgumentError] if `reduction` is not an integer or is negative
-    #
-    # @raise [ArgumentError] if `@free` - `@reduction` is less than zero
-    #
-    # @return [nil]
-    #
-    # @!visibility private
-    def reduce_permits(reduction)
-      Utility::NativeInteger.ensure_integer_and_bounds reduction
-      Utility::NativeInteger.ensure_positive reduction
-
-      synchronize { @free -= reduction }
-      nil
-    end
-
-    protected
-
-    # @!visibility private
-    def ns_initialize(count)
-      @free = count
-    end
-
-    private
-
-    # @!visibility private
-    def try_acquire_now(permits)
-      if @free >= permits
-        @free -= permits
-        true
-      else
-        false
-      end
-    end
-
-    # @!visibility private
-    def try_acquire_timed(permits, timeout)
-      ns_wait_until(timeout) { try_acquire_now(permits) }
-    end
-  end
-end

data/vendor/bundle/jruby/2.5.0/gems/concurrent-ruby-1.1.6/lib/concurrent-ruby/concurrent/atomic/read_write_lock.rb

@@ -1,254 +0,0 @@
-require 'thread'
-require 'concurrent/atomic/atomic_fixnum'
-require 'concurrent/errors'
-require 'concurrent/synchronization'
-
-module Concurrent
-
-  # Ruby read-write lock implementation
-  #
-  # Allows any number of concurrent readers, but only one concurrent writer
-  # (And if the "write" lock is taken, any readers who come along will have to wait)
-  #
-  # If readers are already active when a writer comes along, the writer will wait for
-  # all the readers to finish before going ahead.
-  # Any additional readers that come when the writer is already waiting, will also
-  # wait (so writers are not starved).
-  #
-  # This implementation is based on `java.util.concurrent.ReentrantReadWriteLock`.
-  #
-  # @example
-  #   lock = Concurrent::ReadWriteLock.new
-  #   lock.with_read_lock  { data.retrieve }
-  #   lock.with_write_lock { data.modify! }
-  #
-  # @note Do **not** try to acquire the write lock while already holding a read lock
-  #   **or** try to acquire the write lock while you already have it.
-  #   This will lead to deadlock
-  #
-  # @see http://docs.oracle.com/javase/7/docs/api/java/util/concurrent/locks/ReentrantReadWriteLock.html java.util.concurrent.ReentrantReadWriteLock
-  class ReadWriteLock < Synchronization::Object
-
-    # @!visibility private
-    WAITING_WRITER = 1 << 15
-
-    # @!visibility private
-    RUNNING_WRITER = 1 << 29
-
-    # @!visibility private
-    MAX_READERS    = WAITING_WRITER - 1
-
-    # @!visibility private
-    MAX_WRITERS    = RUNNING_WRITER - MAX_READERS - 1
-
-    safe_initialization!
-
-    # Implementation notes:
-    # A goal is to make the uncontended path for both readers/writers lock-free
-    # Only if there is reader-writer or writer-writer contention, should locks be used
-    # Internal state is represented by a single integer ("counter"), and updated
-    #  using atomic compare-and-swap operations
-    # When the counter is 0, the lock is free
-    # Each reader increments the counter by 1 when acquiring a read lock
-    #   (and decrements by 1 when releasing the read lock)
-    # The counter is increased by (1 << 15) for each writer waiting to acquire the
-    #   write lock, and by (1 << 29) if the write lock is taken
-
-    # Create a new `ReadWriteLock` in the unlocked state.
-    def initialize
-      super()
-      @Counter   = AtomicFixnum.new(0) # single integer which represents lock state
-      @ReadLock  = Synchronization::Lock.new
-      @WriteLock = Synchronization::Lock.new
-    end
-
-    # Execute a block operation within a read lock.
-    #
-    # @yield the task to be performed within the lock.
-    #
-    # @return [Object] the result of the block operation.
-    #
-    # @raise [ArgumentError] when no block is given.
-    # @raise [Concurrent::ResourceLimitError] if the maximum number of readers
-    #   is exceeded.
-    def with_read_lock
-      raise ArgumentError.new('no block given') unless block_given?
-      acquire_read_lock
-      begin
-        yield
-      ensure
-        release_read_lock
-      end
-    end
-
-    # Execute a block operation within a write lock.
-    #
-    # @yield the task to be performed within the lock.
-    #
-    # @return [Object] the result of the block operation.
-    #
-    # @raise [ArgumentError] when no block is given.
-    # @raise [Concurrent::ResourceLimitError] if the maximum number of readers
-    #   is exceeded.
-    def with_write_lock
-      raise ArgumentError.new('no block given') unless block_given?
-      acquire_write_lock
-      begin
-        yield
-      ensure
-        release_write_lock
-      end
-    end
-
-    # Acquire a read lock. If a write lock has been acquired will block until
-    # it is released. Will not block if other read locks have been acquired.
-    #
-    # @return [Boolean] true if the lock is successfully acquired
-    #
-    # @raise [Concurrent::ResourceLimitError] if the maximum number of readers
-    #   is exceeded.
-    def acquire_read_lock
-      while true
-        c = @Counter.value
-        raise ResourceLimitError.new('Too many reader threads') if max_readers?(c)
-
-        # If a writer is waiting when we first queue up, we need to wait
-        if waiting_writer?(c)
-          @ReadLock.wait_until { !waiting_writer? }
-
-          # after a reader has waited once, they are allowed to "barge" ahead of waiting writers
-          # but if a writer is *running*, the reader still needs to wait (naturally)
-          while true
-            c = @Counter.value
-            if running_writer?(c)
-              @ReadLock.wait_until { !running_writer? }
-            else
-              return if @Counter.compare_and_set(c, c+1)
-            end
-          end
-        else
-          break if @Counter.compare_and_set(c, c+1)
-        end
-      end
-      true
-    end
-
-    # Release a previously acquired read lock.
-    #
-    # @return [Boolean] true if the lock is successfully released
-    def release_read_lock
-      while true
-        c = @Counter.value
-        if @Counter.compare_and_set(c, c-1)
-          # If one or more writers were waiting, and we were the last reader, wake a writer up
-          if waiting_writer?(c) && running_readers(c) == 1
-            @WriteLock.signal
-          end
-          break
-        end
-      end
-      true
-    end
-
-    # Acquire a write lock. Will block and wait for all active readers and writers.
-    #
-    # @return [Boolean] true if the lock is successfully acquired
-    #
-    # @raise [Concurrent::ResourceLimitError] if the maximum number of writers
-    #   is exceeded.
-    def acquire_write_lock
-      while true
-        c = @Counter.value
-        raise ResourceLimitError.new('Too many writer threads') if max_writers?(c)
-
-        if c == 0 # no readers OR writers running
-          # if we successfully swap the RUNNING_WRITER bit on, then we can go ahead
-          break if @Counter.compare_and_set(0, RUNNING_WRITER)
-        elsif @Counter.compare_and_set(c, c+WAITING_WRITER)
-          while true
-            # Now we have successfully incremented, so no more readers will be able to increment
-            #   (they will wait instead)
-            # However, readers OR writers could decrement right here, OR another writer could increment
-            @WriteLock.wait_until do
-              # So we have to do another check inside the synchronized section
-              # If a writer OR reader is running, then go to sleep
-              c = @Counter.value
-              !running_writer?(c) && !running_readers?(c)
-            end
-
-            # We just came out of a wait
-            # If we successfully turn the RUNNING_WRITER bit on with an atomic swap,
-            # Then we are OK to stop waiting and go ahead
-            # Otherwise go back and wait again
-            c = @Counter.value
-            break if !running_writer?(c) && !running_readers?(c) && @Counter.compare_and_set(c, c+RUNNING_WRITER-WAITING_WRITER)
-          end
-          break
-        end
-      end
-      true
-    end
-
-    # Release a previously acquired write lock.
-    #
-    # @return [Boolean] true if the lock is successfully released
-    def release_write_lock
-      return true unless running_writer?
-      c = @Counter.update { |counter| counter - RUNNING_WRITER }
-      @ReadLock.broadcast
-      @WriteLock.signal if waiting_writers(c) > 0
-      true
-    end
-
-    # Queries if the write lock is held by any thread.
-    #
-    # @return [Boolean] true if the write lock is held else false`
-    def write_locked?
-      @Counter.value >= RUNNING_WRITER
-    end
-
-    # Queries whether any threads are waiting to acquire the read or write lock.
-    #
-    # @return [Boolean] true if any threads are waiting for a lock else false
-    def has_waiters?
-      waiting_writer?(@Counter.value)
-    end
-
-    private
-
-    # @!visibility private
-    def running_readers(c = @Counter.value)
-      c & MAX_READERS
-    end
-
-    # @!visibility private
-    def running_readers?(c = @Counter.value)
-      (c & MAX_READERS) > 0
-    end
-
-    # @!visibility private
-    def running_writer?(c = @Counter.value)
-      c >= RUNNING_WRITER
-    end
-
-    # @!visibility private
-    def waiting_writers(c = @Counter.value)
-      (c & MAX_WRITERS) / WAITING_WRITER
-    end
-
-    # @!visibility private
-    def waiting_writer?(c = @Counter.value)
-      c >= WAITING_WRITER
-    end
-
-    # @!visibility private
-    def max_readers?(c = @Counter.value)
-      (c & MAX_READERS) == MAX_READERS
-    end
-
-    # @!visibility private
-    def max_writers?(c = @Counter.value)
-      (c & MAX_WRITERS) == MAX_WRITERS
-    end
-  end
-end

data/vendor/bundle/jruby/2.5.0/gems/concurrent-ruby-1.1.6/lib/concurrent-ruby/concurrent/atomic/reentrant_read_write_lock.rb

@@ -1,379 +0,0 @@
-require 'thread'
-require 'concurrent/atomic/atomic_reference'
-require 'concurrent/errors'
-require 'concurrent/synchronization'
-require 'concurrent/atomic/thread_local_var'
-
-module Concurrent
-
-  # Re-entrant read-write lock implementation
-  #
-  # Allows any number of concurrent readers, but only one concurrent writer
-  # (And while the "write" lock is taken, no read locks can be obtained either.
-  # Hence, the write lock can also be called an "exclusive" lock.)
-  #
-  # If another thread has taken a read lock, any thread which wants a write lock
-  # will block until all the readers release their locks. However, once a thread
-  # starts waiting to obtain a write lock, any additional readers that come along
-  # will also wait (so writers are not starved).
-  #
-  # A thread can acquire both a read and write lock at the same time. A thread can
-  # also acquire a read lock OR a write lock more than once. Only when the read (or
-  # write) lock is released as many times as it was acquired, will the thread
-  # actually let it go, allowing other threads which might have been waiting
-  # to proceed. Therefore the lock can be upgraded by first acquiring
-  # read lock and then write lock and that the lock can be downgraded by first
-  # having both read and write lock a releasing just the write lock.
-  #
-  # If both read and write locks are acquired by the same thread, it is not strictly
-  # necessary to release them in the same order they were acquired. In other words,
-  # the following code is legal:
-  #
-  # @example
-  #   lock = Concurrent::ReentrantReadWriteLock.new
-  #   lock.acquire_write_lock
-  #   lock.acquire_read_lock
-  #   lock.release_write_lock
-  #   # At this point, the current thread is holding only a read lock, not a write
-  #   # lock. So other threads can take read locks, but not a write lock.
-  #   lock.release_read_lock
-  #   # Now the current thread is not holding either a read or write lock, so
-  #   # another thread could potentially acquire a write lock.
-  #
-  # This implementation was inspired by `java.util.concurrent.ReentrantReadWriteLock`.
-  #
-  # @example
-  #   lock = Concurrent::ReentrantReadWriteLock.new
-  #   lock.with_read_lock  { data.retrieve }
-  #   lock.with_write_lock { data.modify! }
-  #
-  # @see http://docs.oracle.com/javase/7/docs/api/java/util/concurrent/locks/ReentrantReadWriteLock.html java.util.concurrent.ReentrantReadWriteLock
-  class ReentrantReadWriteLock < Synchronization::Object
-
-    # Implementation notes:
-    #
-    # A goal is to make the uncontended path for both readers/writers mutex-free
-    # Only if there is reader-writer or writer-writer contention, should mutexes be used
-    # Otherwise, a single CAS operation is all we need to acquire/release a lock
-    #
-    # Internal state is represented by a single integer ("counter"), and updated
-    #   using atomic compare-and-swap operations
-    # When the counter is 0, the lock is free
-    # Each thread which has one OR MORE read locks increments the counter by 1
-    #   (and decrements by 1 when releasing the read lock)
-    # The counter is increased by (1 << 15) for each writer waiting to acquire the
-    #   write lock, and by (1 << 29) if the write lock is taken
-    #
-    # Additionally, each thread uses a thread-local variable to count how many times
-    #   it has acquired a read lock, AND how many times it has acquired a write lock.
-    # It uses a similar trick; an increment of 1 means a read lock was taken, and
-    #   an increment of (1 << 15) means a write lock was taken
-    # This is what makes re-entrancy possible
-    #
-    # 2 rules are followed to ensure good liveness properties:
-    # 1) Once a writer has queued up and is waiting for a write lock, no other thread
-    #    can take a lock without waiting
-    # 2) When a write lock is released, readers are given the "first chance" to wake
-    #    up and acquire a read lock
-    # Following these rules means readers and writers tend to "take turns", so neither
-    #   can starve the other, even under heavy contention
-
-    # @!visibility private
-    READER_BITS    = 15
-    # @!visibility private
-    WRITER_BITS    = 14
-
-    # Used with @Counter:
-    # @!visibility private
-    WAITING_WRITER = 1 << READER_BITS
-    # @!visibility private
-    RUNNING_WRITER = 1 << (READER_BITS + WRITER_BITS)
-    # @!visibility private
-    MAX_READERS    = WAITING_WRITER - 1
-    # @!visibility private
-    MAX_WRITERS    = RUNNING_WRITER - MAX_READERS - 1
-
-    # Used with @HeldCount:
-    # @!visibility private
-    WRITE_LOCK_HELD = 1 << READER_BITS
-    # @!visibility private
-    READ_LOCK_MASK  = WRITE_LOCK_HELD - 1
-    # @!visibility private
-    WRITE_LOCK_MASK = MAX_WRITERS
-
-    safe_initialization!
-
-    # Create a new `ReentrantReadWriteLock` in the unlocked state.
-    def initialize
-      super()
-      @Counter    = AtomicFixnum.new(0)       # single integer which represents lock state
-      @ReadQueue  = Synchronization::Lock.new # used to queue waiting readers
-      @WriteQueue = Synchronization::Lock.new # used to queue waiting writers
-      @HeldCount  = ThreadLocalVar.new(0)     # indicates # of R & W locks held by this thread
-    end
-
-    # Execute a block operation within a read lock.
-    #
-    # @yield the task to be performed within the lock.
-    #
-    # @return [Object] the result of the block operation.
-    #
-    # @raise [ArgumentError] when no block is given.
-    # @raise [Concurrent::ResourceLimitError] if the maximum number of readers
-    #   is exceeded.
-    def with_read_lock
-      raise ArgumentError.new('no block given') unless block_given?
-      acquire_read_lock
-      begin
-        yield
-      ensure
-        release_read_lock
-      end
-    end
-
-    # Execute a block operation within a write lock.
-    #
-    # @yield the task to be performed within the lock.
-    #
-    # @return [Object] the result of the block operation.
-    #
-    # @raise [ArgumentError] when no block is given.
-    # @raise [Concurrent::ResourceLimitError] if the maximum number of readers
-    #   is exceeded.
-    def with_write_lock
-      raise ArgumentError.new('no block given') unless block_given?
-      acquire_write_lock
-      begin
-        yield
-      ensure
-        release_write_lock
-      end
-    end
-
-    # Acquire a read lock. If a write lock is held by another thread, will block
-    # until it is released.
-    #
-    # @return [Boolean] true if the lock is successfully acquired
-    #
-    # @raise [Concurrent::ResourceLimitError] if the maximum number of readers
-    #   is exceeded.
-    def acquire_read_lock
-      if (held = @HeldCount.value) > 0
-        # If we already have a lock, there's no need to wait
-        if held & READ_LOCK_MASK == 0
-          # But we do need to update the counter, if we were holding a write
-          #   lock but not a read lock
-          @Counter.update { |c| c + 1 }
-        end
-        @HeldCount.value = held + 1
-        return true
-      end
-
-      while true
-        c = @Counter.value
-        raise ResourceLimitError.new('Too many reader threads') if max_readers?(c)
-
-        # If a writer is waiting OR running when we first queue up, we need to wait
-        if waiting_or_running_writer?(c)
-          # Before going to sleep, check again with the ReadQueue mutex held
-          @ReadQueue.synchronize do
-            @ReadQueue.ns_wait if waiting_or_running_writer?
-          end
-          # Note: the above 'synchronize' block could have used #wait_until,
-          #   but that waits repeatedly in a loop, checking the wait condition
-          #   each time it wakes up (to protect against spurious wakeups)
-          # But we are already in a loop, which is only broken when we successfully
-          #   acquire the lock! So we don't care about spurious wakeups, and would
-          #   rather not pay the extra overhead of using #wait_until
-
-          # After a reader has waited once, they are allowed to "barge" ahead of waiting writers
-          # But if a writer is *running*, the reader still needs to wait (naturally)
-          while true
-            c = @Counter.value
-            if running_writer?(c)
-              @ReadQueue.synchronize do
-                @ReadQueue.ns_wait if running_writer?
-              end
-            elsif @Counter.compare_and_set(c, c+1)
-              @HeldCount.value = held + 1
-              return true
-            end
-          end
-        elsif @Counter.compare_and_set(c, c+1)
-          @HeldCount.value = held + 1
-          return true
-        end
-      end
-    end
-
-    # Try to acquire a read lock and return true if we succeed. If it cannot be
-    # acquired immediately, return false.
-    #
-    # @return [Boolean] true if the lock is successfully acquired
-    def try_read_lock
-      if (held = @HeldCount.value) > 0
-        if held & READ_LOCK_MASK == 0
-          # If we hold a write lock, but not a read lock...
-          @Counter.update { |c| c + 1 }
-        end
-        @HeldCount.value = held + 1
-        return true
-      else
-        c = @Counter.value
-        if !waiting_or_running_writer?(c) && @Counter.compare_and_set(c, c+1)
-          @HeldCount.value = held + 1
-          return true
-        end
-      end
-      false
-    end
-
-    # Release a previously acquired read lock.
-    #
-    # @return [Boolean] true if the lock is successfully released
-    def release_read_lock
-      held = @HeldCount.value = @HeldCount.value - 1
-      rlocks_held = held & READ_LOCK_MASK
-      if rlocks_held == 0
-        c = @Counter.update { |counter| counter - 1 }
-        # If one or more writers were waiting, and we were the last reader, wake a writer up
-        if waiting_or_running_writer?(c) && running_readers(c) == 0
-          @WriteQueue.signal
-        end
-      elsif rlocks_held == READ_LOCK_MASK
-        raise IllegalOperationError, "Cannot release a read lock which is not held"
-      end
-      true
-    end
-
-    # Acquire a write lock. Will block and wait for all active readers and writers.
-    #
-    # @return [Boolean] true if the lock is successfully acquired
-    #
-    # @raise [Concurrent::ResourceLimitError] if the maximum number of writers
-    #   is exceeded.
-    def acquire_write_lock
-      if (held = @HeldCount.value) >= WRITE_LOCK_HELD
-        # if we already have a write (exclusive) lock, there's no need to wait
-        @HeldCount.value = held + WRITE_LOCK_HELD
-        return true
-      end
-
-      while true
-        c = @Counter.value
-        raise ResourceLimitError.new('Too many writer threads') if max_writers?(c)
-
-        # To go ahead and take the lock without waiting, there must be no writer
-        #   running right now, AND no writers who came before us still waiting to
-        #   acquire the lock
-        # Additionally, if any read locks have been taken, we must hold all of them
-        if c == held
-          # If we successfully swap the RUNNING_WRITER bit on, then we can go ahead
-          if @Counter.compare_and_set(c, c+RUNNING_WRITER)
-            @HeldCount.value = held + WRITE_LOCK_HELD
-            return true
-          end
-        elsif @Counter.compare_and_set(c, c+WAITING_WRITER)
-          while true
-            # Now we have successfully incremented, so no more readers will be able to increment
-            #   (they will wait instead)
-            # However, readers OR writers could decrement right here
-            @WriteQueue.synchronize do
-              # So we have to do another check inside the synchronized section
-              # If a writer OR another reader is running, then go to sleep
-              c = @Counter.value
-              @WriteQueue.ns_wait if running_writer?(c) || running_readers(c) != held
-            end
-            # Note: if you are thinking of replacing the above 'synchronize' block
-            # with #wait_until, read the comment in #acquire_read_lock first!
-
-            # We just came out of a wait
-            # If we successfully turn the RUNNING_WRITER bit on with an atomic swap,
-            #   then we are OK to stop waiting and go ahead
-            # Otherwise go back and wait again
-            c = @Counter.value
-            if !running_writer?(c) &&
-               running_readers(c) == held &&
-               @Counter.compare_and_set(c, c+RUNNING_WRITER-WAITING_WRITER)
-              @HeldCount.value = held + WRITE_LOCK_HELD
-              return true
-            end
-          end
-        end
-      end
-    end
-
-    # Try to acquire a write lock and return true if we succeed. If it cannot be
-    # acquired immediately, return false.
-    #
-    # @return [Boolean] true if the lock is successfully acquired
-    def try_write_lock
-      if (held = @HeldCount.value) >= WRITE_LOCK_HELD
-        @HeldCount.value = held + WRITE_LOCK_HELD
-        return true
-      else
-        c = @Counter.value
-        if !waiting_or_running_writer?(c) &&
-           running_readers(c) == held &&
-           @Counter.compare_and_set(c, c+RUNNING_WRITER)
-           @HeldCount.value = held + WRITE_LOCK_HELD
-          return true
-        end
-      end
-      false
-    end
-
-    # Release a previously acquired write lock.
-    #
-    # @return [Boolean] true if the lock is successfully released
-    def release_write_lock
-      held = @HeldCount.value = @HeldCount.value - WRITE_LOCK_HELD
-      wlocks_held = held & WRITE_LOCK_MASK
-      if wlocks_held == 0
-        c = @Counter.update { |counter| counter - RUNNING_WRITER }
-        @ReadQueue.broadcast
-        @WriteQueue.signal if waiting_writers(c) > 0
-      elsif wlocks_held == WRITE_LOCK_MASK
-        raise IllegalOperationError, "Cannot release a write lock which is not held"
-      end
-      true
-    end
-
-    private
-
-    # @!visibility private
-    def running_readers(c = @Counter.value)
-      c & MAX_READERS
-    end
-
-    # @!visibility private
-    def running_readers?(c = @Counter.value)
-      (c & MAX_READERS) > 0
-    end
-
-    # @!visibility private
-    def running_writer?(c = @Counter.value)
-      c >= RUNNING_WRITER
-    end
-
-    # @!visibility private
-    def waiting_writers(c = @Counter.value)
-      (c & MAX_WRITERS) >> READER_BITS
-    end
-
-    # @!visibility private
-    def waiting_or_running_writer?(c = @Counter.value)
-      c >= WAITING_WRITER
-    end
-
-    # @!visibility private
-    def max_readers?(c = @Counter.value)
-      (c & MAX_READERS) == MAX_READERS
-    end
-
-    # @!visibility private
-    def max_writers?(c = @Counter.value)
-      (c & MAX_WRITERS) == MAX_WRITERS
-    end
-  end
-end