logstash-input-beats 2.0.2 → 2.0.3

data/vendor/jruby/1.9/gems/logstash-codec-json-2.0.3/vendor/gems/method_source-0.8.2/test/test_code_helpers.rb

@@ -1,41 +0,0 @@
-describe MethodSource::CodeHelpers do
-  before do
-    @tester = Object.new.extend(MethodSource::CodeHelpers)
-  end
-
-  [
-    ["p = '", "'"],
-    ["def", "a", "(); end"],
-    ["p = <<FOO", "lots", "and", "lots of", "foo", "FOO"],
-    ["[", ":lets,", "'list',", "[/nested/", "], things ]"],
-    ["abc =~ /hello", "/"],
-    ["issue = %W/", "343/"],
-    ["pouts(<<HI, 'foo", "bar", "HI", "baz')"],
-    ["=begin", "no-one uses this syntax anymore...", "=end"],
-    ["puts 1, 2,", "3"],
-    ["puts 'hello'\\", "'world'"]
-  ].each do |lines|
-    it "should not raise an error on broken lines: #{lines.join("\\n")}" do
-      1.upto(lines.size - 1) do |i|
-        @tester.complete_expression?(lines[0...i].join("\n") + "\n").should == false
-      end
-      @tester.complete_expression?(lines.join("\n")).should == true
-    end
-  end
-
-  [
-    ["end"],
-    ["puts )("],
-    ["1 1"],
-    ["puts :"]
-  ] + (RbConfig::CONFIG['ruby_install_name'] == 'rbx' ? [] : [
-    ["def", "method(1"], # in this case the syntax error is "expecting ')'".
-    ["o = Object.new.tap{ def o.render;","'MEH'", "}"] # in this case the syntax error is "expecting keyword_end".
-  ]).compact.each do |foo|
-    it "should raise an error on invalid syntax like #{foo.inspect}" do
-      lambda{
-        @tester.complete_expression?(foo.join("\n"))
-      }.should.raise(SyntaxError)
-    end
-  end
-end

data/vendor/jruby/1.9/gems/logstash-codec-json-2.0.3/vendor/gems/method_source-0.8.2/test/test_helper.rb

@@ -1,98 +0,0 @@
-def is_rbx?
-  defined?(RUBY_ENGINE) && RUBY_ENGINE =~ /rbx/
-end
-
-def jruby?
-  defined?(RUBY_ENGINE) && RUBY_ENGINE =~ /jruby/
-end
-
-
-module M
-  def hello; :hello_module; end
-end
-
-$o = Object.new
-def $o.hello; :hello_singleton; end
-
-# A comment for hello
-
-  # It spans two lines and is indented by 2 spaces
-def hello; :hello; end
-
-# a
-# b
-def comment_test1; end
-
- # a
- # b
-def comment_test2; end
-
-# a
-#
-# b
-def comment_test3; end
-
-# a
-
-# b
-def comment_test4; end
-
-
-# a
-  # b
-    # c
-# d
-def comment_test5; end
-
-# This is a comment for MyLambda
-MyLambda = lambda { :lambda }
-MyProc = Proc.new { :proc }
-
-
-name = "name"
-
-M.instance_eval <<-METHOD, __FILE__, __LINE__ + 1
-  def hello_#{name}(*args)
-    send_mesg(:#{name}, *args)
-  end
-METHOD
-
-M.class_eval <<-METHOD, __FILE__, __LINE__ + 1
-  def hello_#{name}(*args)
-    send_mesg(:#{name}, *args)
-  end
-METHOD
-
-# module_eval to DRY code up
-#
-M.module_eval <<-METHOD, __FILE__, __LINE__ + 1
-
-  # module_eval is used here
-  #
-  def hi_#{name}
-    @var = #{name}
-  end
-METHOD
-
-# case where 2 methods are defined inside an _eval block
-#
-M.instance_eval <<EOF, __FILE__, __LINE__ + 1
-
-  def #{name}_one()
-    if 43
-      44
-    end
-  end
-
-
-  def #{name}_two()
-    if 44
-      45
-    end
-  end
-EOF
-
-# class_eval without filename and lineno + 1 parameter
-
-M.class_eval "def #{name}_three; @tempfile.#{name}; end"
-

data/vendor/jruby/1.9/gems/logstash-codec-json-2.0.3/vendor/gems/minitar-0.5.4/ChangeLog

@@ -1,17 +0,0 @@
-Revision history for Ruby library Archive::Tar::Minitar. Unless explicitly
-noted otherwise, all changes are produced by Austin Ziegler
-<austin@rubyforge.org>.
-
-== 0.5.3
-* Fix for long names (http://rubyforge.org/tracker/index.php?func=detail&aid=22628&group_id=84&atid=407)
-
-== 0.5.2
-* Fixed a Ruby 1.9 compatibility error.
-
-== 0.5.1
-* Fixed a variable name error.
-
-== Archive::Tar::Minitar 0.5.0
-* Initial release. Does files and directories. Command does create, extract,
-* and list.
-

data/vendor/jruby/1.9/gems/logstash-codec-json-2.0.3/vendor/gems/minitar-0.5.4/Install

@@ -1,6 +0,0 @@
-Installing this package is as simple as:
-
-% ruby install.rb
-
-Alternatively, you can use the RubyGem version of Archive::Tar::Minitar
-available as archive-tar-minitar-0.5.2.gem from the usual sources.

data/vendor/jruby/1.9/gems/logstash-codec-json-2.0.3/vendor/gems/minitar-0.5.4/README

@@ -1,68 +0,0 @@
-Archive::Tar::Minitar README
-============================
-Archive::Tar::Minitar is a pure-Ruby library and command-line utility that
-provides the ability to deal with POSIX tar(1) archive files. The
-implementation is based heavily on Mauricio Ferna'ndez's implementation in
-rpa-base, but has been reorganised to promote reuse in other projects.
-Antoine Toulme forked the original project on rubyforge to place it on github, under
-http://www.github.com/atoulme/minitar
-
-This release is version 0.5.2, offering a Ruby 1.9 compatibility bugfix over
-version 0.5.1. The library can only handle files and directories at this
-point. A future version will be expanded to handle symbolic links and hard
-links in a portable manner. The command line utility, minitar, can only create
-archives, extract from archives, and list archive contents.
-
-Using this library is easy. The simplest case is:
-
-  require 'zlib'
-  require 'archive/tar/minitar'
-  include Archive::Tar
-
-    # Packs everything that matches Find.find('tests')
-  File.open('test.tar', 'wb') { |tar| Minitar.pack('tests', tar) }
-    # Unpacks 'test.tar' to 'x', creating 'x' if necessary.
-  Minitar.unpack('test.tar', 'x')
-
-A gzipped tar can be written with:
-
-    tgz = Zlib::GzipWriter.new(File.open('test.tgz', 'wb'))
-      # Warning: tgz will be closed!
-    Minitar.pack('tests', tgz)
-
-    tgz = Zlib::GzipReader.new(File.open('test.tgz', 'rb'))
-      # Warning: tgz will be closed!
-    Minitar.unpack(tgz, 'x')
-
-As the case above shows, one need not write to a file. However, it will
-sometimes require that one dive a little deeper into the API, as in the case
-of StringIO objects. Note that I'm not providing a block with Minitar::Output,
-as Minitar::Output#close automatically closes both the Output object and the
-wrapped data stream object.
-
-  begin
-    sgz = Zlib::GzipWriter.new(StringIO.new(""))
-    tar = Output.new(sgz)
-    Find.find('tests') do |entry|
-      Minitar.pack_file(entry, tar)
-    end
-  ensure
-      # Closes both tar and sgz.
-    tar.close
-  end
-
-Copyright
-=========
-# Copyright 2004 Mauricio Julio Ferna'ndez Pradier and Austin Ziegler
-#
-# This program is based on and incorporates parts of RPA::Package from
-# rpa-base (lib/rpa/package.rb and lib/rpa/util.rb) by Mauricio and has been
-# adapted to be more generic by Austin.
-#
-# 'minitar' contains an adaptation of Ruby/ProgressBar by Satoru
-# Takabayashi <satoru@namazu.org>, copyright 2001 - 2004.
-#
-# This program is free software. It may be redistributed and/or modified
-# under the terms of the GPL version 2 (or later) or Ruby's licence.
-# 
-# $Id$

data/vendor/jruby/1.9/gems/logstash-codec-json-2.0.3/vendor/gems/minitar-0.5.4/Rakefile

@@ -1,113 +0,0 @@
-#! /usr/bin/env rake
-$LOAD_PATH.unshift('lib')
-
-require 'rubygems'
-require 'rake/gempackagetask'
-require 'rake/contrib/rubyforgepublisher'
-require 'archive/tar/minitar'
-require 'zlib'
-
-DISTDIR = "archive-tar-minitar-#{Archive::Tar::Minitar::VERSION}"
-TARDIST = "../#{DISTDIR}.tar.gz"
-
-DATE_RE = %r<(\d{4})[./-]?(\d{2})[./-]?(\d{2})(?:[\sT]?(\d{2})[:.]?(\d{2})[:.]?(\d{2})?)?>
-
-if ENV['RELEASE_DATE']
-  year, month, day, hour, minute, second = DATE_RE.match(ENV['RELEASE_DATE']).captures
-  year ||= 0
-  month ||= 0
-  day ||= 0
-  hour ||= 0
-  minute ||= 0
-  second ||= 0
-  ReleaseDate = Time.mktime(year, month, day, hour, minute, second)
-else
-  ReleaseDate = nil
-end
-
-task :test do |t|
-  require 'test/unit/testsuite'
-  require 'test/unit/ui/console/testrunner'
-
-  runner = Test::Unit::UI::Console::TestRunner
-
-  $LOAD_PATH.unshift('tests')
-  Dir['tests/tc_*.rb'].each do |testcase|
-    load testcase
-  end
-
-  suite = Test::Unit::TestSuite.new
-
-  ObjectSpace.each_object(Class) do |testcase|
-    suite << testcase.suite if testcase < Test::Unit::TestCase
-  end
-
-  runner.run(suite)
-end
-
-spec = eval(File.read("archive-tar-minitar.gemspec"))
-desc "Build the RubyGem for Archive::Tar::Minitar."
-task :gem => [ :test ]
-Rake::GemPackageTask.new(spec) do |g|
-  g.need_tar    = false
-  g.need_zip    = false
-  g.package_dir = ".."
-end
-
-desc "Build an Archive::Tar::Minitar .tar.gz distribution."
-task :tar => [ TARDIST ]
-file TARDIST do |t|
-  current = File.basename(Dir.pwd)
-  Dir.chdir("..") do
-    begin
-      files = Dir["#{current}/**/*"].select { |dd| dd !~ %r{(?:/CVS/?|~$)} }
-      files.map! do |dd|
-        ddnew = dd.gsub(/^#{current}/, DISTDIR)
-        mtime = ReleaseDate || File.stat(dd).mtime
-        if File.directory?(dd)
-          { :name => ddnew, :mode => 0755, :dir => true, :mtime => mtime }
-        else
-          if dd =~ %r{bin/}
-            mode = 0755
-          else
-            mode = 0644
-          end
-          data = File.read(dd)
-          { :name => ddnew, :mode => mode, :data => data, :size => data.size,
-            :mtime => mtime }
-        end
-      end
-
-      ff = File.open(t.name.gsub(%r{^\.\./}o, ''), "wb")
-      gz = Zlib::GzipWriter.new(ff)
-      tw = Archive::Tar::Minitar::Writer.new(gz)
-
-      files.each do |entry|
-        if entry[:dir]
-          tw.mkdir(entry[:name], entry)
-        else
-          tw.add_file_simple(entry[:name], entry) { |os| os.write(entry[:data]) }
-        end
-      end
-    ensure
-      tw.close if tw
-      gz.close if gz
-    end
-  end
-end
-task TARDIST => [ :test ]
-
-def sign(file)
-  sh %("C:\\Program Files\\Windows Privacy Tools\\GnuPG\\Gpg.exe" -ba #{file})
-end
-
-task :signtar => [ :tar ] do
-  sign TARDIST
-end
-task :signgem => [ :gem ] do
-  sign "../#{DISTDIR}.gem"
-end
-
-desc "Build everything."
-task :default => [ :signtar, :signgem ] do
-end

data/vendor/jruby/1.9/gems/logstash-codec-json-2.0.3/vendor/gems/minitar-0.5.4/bin/minitar

@@ -1,27 +0,0 @@
-#!/usr/bin/env ruby
-#--
-# Archive::Tar::Minitar 0.5.2
-#   Copyright 2004 Mauricio Julio Ferna'ndez Pradier and Austin Ziegler
-#
-# This program is based on and incorporates parts of RPA::Package from
-# rpa-base (lib/rpa/package.rb and lib/rpa/util.rb) by Mauricio and has been
-# adapted to be more generic by Austin.
-#
-# It is licensed under the GNU General Public Licence or Ruby's licence.
-#
-# $Id$
-#++
-
-  # 1) Try to load Archive::Tar::Minitar from the gem.
-  # 2) Try to load Archive::Tar::Minitar from $LOAD_PATH.
-begin
-  require 'rubygems'
-  require_gem 'archive-tar-minitar', '= 0.5.2'
-rescue LoadError
-  nil
-end
-
-require 'archive/tar/minitar'
-require 'archive/tar/minitar/command'
-
-exit Archive::Tar::Minitar::Command.run(ARGV)

data/vendor/jruby/1.9/gems/logstash-codec-json-2.0.3/vendor/gems/minitar-0.5.4/lib/archive/tar/minitar.rb

@@ -1,985 +0,0 @@
-#!/usr/bin/env ruby
-#--
-# Archive::Tar::Minitar 0.5.2
-#   Copyright 2004 Mauricio Julio Ferna'ndez Pradier and Austin Ziegler
-#
-# This program is based on and incorporates parts of RPA::Package from
-# rpa-base (lib/rpa/package.rb and lib/rpa/util.rb) by Mauricio and has been
-# adapted to be more generic by Austin.
-#
-# It is licensed under the GNU General Public Licence or Ruby's licence.
-#
-# $Id$
-#++
-
-module Archive; end
-module Archive::Tar; end
-
-  # = Archive::Tar::PosixHeader
-  # Implements the POSIX tar header as a Ruby class. The structure of
-  # the POSIX tar header is:
-  #
-  #   struct tarfile_entry_posix
-  #   {                      //                               pack/unpack
-  #      char name[100];     // ASCII (+ Z unless filled)     a100/Z100
-  #      char mode[8];       // 0 padded, octal, null         a8  /A8
-  #      char uid[8];        // ditto                         a8  /A8
-  #      char gid[8];        // ditto                         a8  /A8
-  #      char size[12];      // 0 padded, octal, null         a12 /A12
-  #      char mtime[12];     // 0 padded, octal, null         a12 /A12
-  #      char checksum[8];   // 0 padded, octal, null, space  a8  /A8
-  #      char typeflag[1];   // see below                     a   /a
-  #      char linkname[100]; // ASCII + (Z unless filled)     a100/Z100
-  #      char magic[6];      // "ustar\0"                     a6  /A6
-  #      char version[2];    // "00"                          a2  /A2
-  #      char uname[32];     // ASCIIZ                        a32 /Z32
-  #      char gname[32];     // ASCIIZ                        a32 /Z32
-  #      char devmajor[8];   // 0 padded, octal, null         a8  /A8
-  #      char devminor[8];   // 0 padded, octal, null         a8  /A8
-  #      char prefix[155];   // ASCII (+ Z unless filled)     a155/Z155
-  #   };
-  #
-  # The +typeflag+ may be one of the following known values:
-  #
-  # <tt>"0"</tt>::  Regular file. NULL should be treated as a synonym, for
-  #                 compatibility purposes.
-  # <tt>"1"</tt>::  Hard link.
-  # <tt>"2"</tt>::  Symbolic link.
-  # <tt>"3"</tt>::  Character device node.
-  # <tt>"4"</tt>::  Block device node.
-  # <tt>"5"</tt>::  Directory.
-  # <tt>"6"</tt>::  FIFO node.
-  # <tt>"7"</tt>::  Reserved.
-  #
-  # POSIX indicates that "A POSIX-compliant implementation must treat any
-  # unrecognized typeflag value as a regular file."
-class Archive::Tar::PosixHeader
-  FIELDS = %w(name mode uid gid size mtime checksum typeflag linkname) +
-           %w(magic version uname gname devmajor devminor prefix)
-
-  FIELDS.each { |field| attr_reader field.intern }
-
-  HEADER_PACK_FORMAT    = "a100a8a8a8a12a12a7aaa100a6a2a32a32a8a8a155"
-  HEADER_UNPACK_FORMAT  = "Z100A8A8A8A12A12A8aZ100A6A2Z32Z32A8A8Z155"
-
-    # Creates a new PosixHeader from a data stream.
-  def self.new_from_stream(stream, long_name = nil)
-    data = stream.read(512)
-    fields    = data.unpack(HEADER_UNPACK_FORMAT)
-    name      = fields.shift
-    mode      = fields.shift.oct
-    uid       = fields.shift.oct
-    gid       = fields.shift.oct
-    size      = fields.shift.oct
-    mtime     = fields.shift.oct
-    checksum  = fields.shift.oct
-    typeflag  = fields.shift
-    linkname  = fields.shift
-    magic     = fields.shift
-    version   = fields.shift.oct
-    uname     = fields.shift
-    gname     = fields.shift
-    devmajor  = fields.shift.oct
-    devminor  = fields.shift.oct
-    prefix    = fields.shift
-
-    empty = (data == "\0" * 512)
-
-    if typeflag == 'L' && name == '././@LongLink'
-	    long_name = stream.read(512).rstrip
-    	return new_from_stream(stream, long_name)
-    end
-
-    new(:name => long_name || name,
-	:mode => mode, :uid => uid, :gid => gid,
-        :size => size, :mtime => mtime, :checksum => checksum,
-        :typeflag => typeflag, :magic => magic, :version => version,
-        :uname => uname, :gname => gname, :devmajor => devmajor,
-        :devminor => devminor, :prefix => prefix, :empty => empty)
-  end
-
-    # Creates a new PosixHeader. A PosixHeader cannot be created unless the
-    # #name, #size, #prefix, and #mode are provided.
-  def initialize(vals)
-    unless vals[:name] && vals[:size] && vals[:prefix] && vals[:mode]
-      raise ArgumentError
-    end
-
-    vals[:mtime]    ||= 0
-    vals[:checksum] ||= ""
-    vals[:typeflag] ||= "0"
-    vals[:magic]    ||= "ustar"
-    vals[:version]  ||= "00"
-
-    FIELDS.each do |field|
-      instance_variable_set("@#{field}", vals[field.intern])
-    end
-    @empty = vals[:empty]
-  end
-
-  def empty?
-    @empty
-  end
-
-  def to_s
-    update_checksum
-    header(@checksum)
-  end
-
-    # Update the checksum field.
-  def update_checksum
-    hh = header(" " * 8)
-    @checksum = oct(calculate_checksum(hh), 6)
-  end
-
-  private
-  def oct(num, len)
-    if num.nil?
-      "\0" * (len + 1)
-    else
-      "%0#{len}o" % num
-    end
-  end
-
-  def calculate_checksum(hdr)
-    hdr.unpack("C*").inject { |aa, bb| aa + bb }
-  end
-
-  def header(chksum)
-    arr = [name, oct(mode, 7), oct(uid, 7), oct(gid, 7), oct(size, 11),
-    oct(mtime, 11), chksum, " ", typeflag, linkname, magic, version,
-    uname, gname, oct(devmajor, 7), oct(devminor, 7), prefix]
-    str = arr.pack(HEADER_PACK_FORMAT)
-    str + "\0" * ((512 - str.size) % 512)
-  end
-end
-
-require 'fileutils'
-require 'find'
-
-  # = Archive::Tar::Minitar 0.5.2
-  # Archive::Tar::Minitar is a pure-Ruby library and command-line
-  # utility that provides the ability to deal with POSIX tar(1) archive
-  # files. The implementation is based heavily on Mauricio Ferna'ndez's
-  # implementation in rpa-base, but has been reorganised to promote
-  # reuse in other projects.
-  #
-  # This tar class performs a subset of all tar (POSIX tape archive)
-  # operations. We can only deal with typeflags 0, 1, 2, and 5 (see
-  # Archive::Tar::PosixHeader). All other typeflags will be treated as
-  # normal files.
-  #
-  # NOTE::: support for typeflags 1 and 2 is not yet implemented in this
-  #         version.
-  #
-  # This release is version 0.5.2. The library can only handle files and
-  # directories at this point. A future version will be expanded to
-  # handle symbolic links and hard links in a portable manner. The
-  # command line utility, minitar, can only create archives, extract
-  # from archives, and list archive contents.
-  #
-  # == Synopsis
-  # Using this library is easy. The simplest case is:
-  #
-  #   require 'zlib'
-  #   require 'archive/tar/minitar'
-  #   include Archive::Tar
-  #
-  #     # Packs everything that matches Find.find('tests')
-  #   File.open('test.tar', 'wb') { |tar| Minitar.pack('tests', tar) }
-  #     # Unpacks 'test.tar' to 'x', creating 'x' if necessary.
-  #   Minitar.unpack('test.tar', 'x')
-  #
-  # A gzipped tar can be written with:
-  #
-  #   tgz = Zlib::GzipWriter.new(File.open('test.tgz', 'wb'))
-  #     # Warning: tgz will be closed!
-  #   Minitar.pack('tests', tgz)
-  #
-  #   tgz = Zlib::GzipReader.new(File.open('test.tgz', 'rb'))
-  #     # Warning: tgz will be closed!
-  #   Minitar.unpack(tgz, 'x')
-  #
-  # As the case above shows, one need not write to a file. However, it
-  # will sometimes require that one dive a little deeper into the API,
-  # as in the case of StringIO objects. Note that I'm not providing a
-  # block with Minitar::Output, as Minitar::Output#close automatically
-  # closes both the Output object and the wrapped data stream object.
-  #
-  #   begin
-  #     sgz = Zlib::GzipWriter.new(StringIO.new(""))
-  #     tar = Output.new(sgz)
-  #     Find.find('tests') do |entry|
-  #       Minitar.pack_file(entry, tar)
-  #     end
-  #   ensure
-  #       # Closes both tar and sgz.
-  #     tar.close
-  #   end
-  #
-  # == Copyright
-  # Copyright 2004 Mauricio Julio Ferna'ndez Pradier and Austin Ziegler
-  #
-  # This program is based on and incorporates parts of RPA::Package from
-  # rpa-base (lib/rpa/package.rb and lib/rpa/util.rb) by Mauricio and
-  # has been adapted to be more generic by Austin.
-  #
-  # 'minitar' contains an adaptation of Ruby/ProgressBar by Satoru
-  # Takabayashi <satoru@namazu.org>, copyright 2001 - 2004.
-  #
-  # This program is free software. It may be redistributed and/or
-  # modified under the terms of the GPL version 2 (or later) or Ruby's
-  # licence.
-module Archive::Tar::Minitar
-  VERSION = "0.5.4"
-
-    # The exception raised when a wrapped data stream class is expected to
-    # respond to #rewind or #pos but does not.
-  class NonSeekableStream < StandardError; end
-    # The exception raised when a block is required for proper operation of
-    # the method.
-  class BlockRequired < ArgumentError; end
-    # The exception raised when operations are performed on a stream that has
-    # previously been closed.
-  class ClosedStream < StandardError; end
-    # The exception raised when a filename exceeds 256 bytes in length,
-    # the maximum supported by the standard Tar format.
-  class FileNameTooLong < StandardError; end
-    # The exception raised when a data stream ends before the amount of data
-    # expected in the archive's PosixHeader.
-  class UnexpectedEOF < StandardError; end
-
-    # The class that writes a tar format archive to a data stream.
-  class Writer
-      # A stream wrapper that can only be written to. Any attempt to read
-      # from this restricted stream will result in a NameError being thrown.
-    class RestrictedStream
-      def initialize(anIO)
-        @io = anIO
-      end
-
-      def write(data)
-        @io.write(data)
-      end
-    end
-
-      # A RestrictedStream that also has a size limit.
-    class BoundedStream < Archive::Tar::Minitar::Writer::RestrictedStream
-        # The exception raised when the user attempts to write more data to
-        # a BoundedStream than has been allocated.
-      class FileOverflow < RuntimeError; end
-
-        # The maximum number of bytes that may be written to this data
-        # stream.
-      attr_reader :limit
-        # The current total number of bytes written to this data stream.
-      attr_reader :written
-
-      def initialize(io, limit)
-        @io       = io
-        @limit    = limit
-        @written  = 0
-      end
-
-      def write(data)
-        raise FileOverflow if (data.size + @written) > @limit
-        @io.write(data)
-        @written += data.size
-        data.size
-      end
-    end
-
-      # With no associated block, +Writer::open+ is a synonym for
-      # +Writer::new+. If the optional code block is given, it will be
-      # passed the new _writer_ as an argument and the Writer object will
-      # automatically be closed when the block terminates. In this instance,
-      # +Writer::open+ returns the value of the block.
-    def self.open(anIO)
-      writer = Writer.new(anIO)
-
-      return writer unless block_given?
-
-      begin
-        res = yield writer
-      ensure
-        writer.close
-      end
-
-      res
-    end
-
-      # Creates and returns a new Writer object.
-    def initialize(anIO)
-      @io     = anIO
-      @closed = false
-    end
-
-      # Adds a file to the archive as +name+. +opts+ must contain the
-      # following values:
-      #
-      # <tt>:mode</tt>::  The Unix file permissions mode value.
-      # <tt>:size</tt>::  The size, in bytes.
-      #
-      # +opts+ may contain the following values:
-      #
-      # <tt>:uid</tt>:    The Unix file owner user ID number.
-      # <tt>:gid</tt>:    The Unix file owner group ID number.
-      # <tt>:mtime</tt>:: The *integer* modification time value.
-      #
-      # It will not be possible to add more than <tt>opts[:size]</tt> bytes
-      # to the file.
-    def add_file_simple(name, opts = {}) # :yields BoundedStream:
-      raise Archive::Tar::Minitar::BlockRequired unless block_given?
-      raise Archive::Tar::ClosedStream if @closed
-
-      name, prefix = split_name(name)
-
-      header = { :name => name, :mode => opts[:mode], :mtime => opts[:mtime],
-        :size => opts[:size], :gid => opts[:gid], :uid => opts[:uid],
-        :prefix => prefix }
-      header = Archive::Tar::PosixHeader.new(header).to_s 
-      @io.write(header)
-
-      os = BoundedStream.new(@io, opts[:size])
-      yield os
-        # FIXME: what if an exception is raised in the block?
-
-      min_padding = opts[:size] - os.written
-      @io.write("\0" * min_padding)
-      remainder = (512 - (opts[:size] % 512)) % 512
-      @io.write("\0" * remainder)
-    end
-
-      # Adds a file to the archive as +name+. +opts+ must contain the
-      # following value:
-      #
-      # <tt>:mode</tt>::  The Unix file permissions mode value.
-      #
-      # +opts+ may contain the following values:
-      #
-      # <tt>:uid</tt>:    The Unix file owner user ID number.
-      # <tt>:gid</tt>:    The Unix file owner group ID number.
-      # <tt>:mtime</tt>:: The *integer* modification time value.
-      #
-      # The file's size will be determined from the amount of data written
-      # to the stream.
-      #
-      # For #add_file to be used, the Archive::Tar::Minitar::Writer must be
-      # wrapping a stream object that is seekable (e.g., it responds to
-      # #pos=). Otherwise, #add_file_simple must be used.
-      #
-      # +opts+ may be modified during the writing to the stream.
-    def add_file(name, opts = {}) # :yields RestrictedStream, +opts+:
-      raise Archive::Tar::Minitar::BlockRequired unless block_given?
-      raise Archive::Tar::Minitar::ClosedStream if @closed
-      raise Archive::Tar::Minitar::NonSeekableStream unless @io.respond_to?(:pos=)
-
-      name, prefix = split_name(name)
-      init_pos = @io.pos
-      @io.write("\0" * 512) # placeholder for the header
-
-      yield RestrictedStream.new(@io), opts
-        # FIXME: what if an exception is raised in the block?
-
-      size      = @io.pos - (init_pos + 512)
-      remainder = (512 - (size % 512)) % 512
-      @io.write("\0" * remainder)
-
-      final_pos = @io.pos
-      @io.pos   = init_pos
-
-      header = { :name => name, :mode => opts[:mode], :mtime => opts[:mtime],
-                 :size => size, :gid => opts[:gid], :uid => opts[:uid],
-                 :prefix => prefix }
-      header = Archive::Tar::PosixHeader.new(header).to_s
-      @io.write(header)
-      @io.pos = final_pos
-    end
-
-      # Creates a directory in the tar.
-    def mkdir(name, opts = {})
-      raise ClosedStream if @closed
-      name, prefix = split_name(name)
-      header = { :name => name, :mode => opts[:mode], :typeflag => "5",
-                 :size => 0, :gid => opts[:gid], :uid => opts[:uid],
-                 :mtime => opts[:mtime], :prefix => prefix }
-      header = Archive::Tar::PosixHeader.new(header).to_s
-      @io.write(header)
-      nil
-    end
-
-      # Passes the #flush method to the wrapped stream, used for buffered
-      # streams.
-    def flush
-      raise ClosedStream if @closed
-      @io.flush if @io.respond_to?(:flush)
-    end
-
-      # Closes the Writer.
-    def close
-      return if @closed
-      @io.write("\0" * 1024)
-      @closed = true
-    end
-
-    private
-    def split_name(name)
-      raise FileNameTooLong if name.size > 256
-      if name.size <= 100
-        prefix = ""
-      else
-        parts = name.split(/\//)
-        newname = parts.pop
-
-        nxt = ""
-
-        loop do
-          nxt = parts.pop
-          break if newname.size + 1 + nxt.size > 100
-          newname = "#{nxt}/#{newname}"
-        end
-
-        prefix = (parts + [nxt]).join("/")
-
-        name = newname
-
-        raise FileNameTooLong if name.size > 100 || prefix.size > 155
-      end
-      return name, prefix
-    end
-  end
-
-    # The class that reads a tar format archive from a data stream. The data
-    # stream may be sequential or random access, but certain features only work
-    # with random access data streams.
-  class Reader
-      # This marks the EntryStream closed for reading without closing the
-      # actual data stream.
-    module InvalidEntryStream
-      def read(len = nil); raise ClosedStream; end
-      def getc; raise ClosedStream;  end
-      def rewind; raise ClosedStream;  end
-    end
-      
-      # EntryStreams are pseudo-streams on top of the main data stream.
-    class EntryStream
-      Archive::Tar::PosixHeader::FIELDS.each do |field|
-        attr_reader field.intern
-      end
-
-      def initialize(header, anIO)
-        @io       = anIO
-        @name     = header.name
-        @mode     = header.mode
-        @uid      = header.uid
-        @gid      = header.gid
-        @size     = header.size
-        @mtime    = header.mtime
-        @checksum = header.checksum
-        @typeflag = header.typeflag
-        @linkname = header.linkname
-        @magic    = header.magic
-        @version  = header.version
-        @uname    = header.uname
-        @gname    = header.gname
-        @devmajor = header.devmajor
-        @devminor = header.devminor
-        @prefix   = header.prefix
-        @read     = 0
-        @orig_pos = @io.pos
-      end
-
-        # Reads +len+ bytes (or all remaining data) from the entry. Returns
-        # +nil+ if there is no more data to read.
-      def read(len = nil)
-        return nil if @read >= @size
-        len ||= @size - @read
-        max_read = [len, @size - @read].min
-        ret = @io.read(max_read)
-        @read += ret.size
-        ret
-      end
-
-        # Reads one byte from the entry. Returns +nil+ if there is no more data
-        # to read.
-      def getc
-        return nil if @read >= @size
-        ret = @io.getc
-        @read += 1 if ret
-        ret
-      end
-
-        # Returns +true+ if the entry represents a directory.
-      def directory?
-        @typeflag == "5"
-      end
-      alias_method :directory, :directory?
-
-        # Returns +true+ if the entry represents a plain file.
-      def file?
-        @typeflag == "0" or @typeflag == "\0"
-      end
-      alias_method :file, :file?
-
-        # Returns +true+ if the current read pointer is at the end of the
-        # EntryStream data.
-      def eof?
-        @read >= @size
-      end
-
-        # Returns the current read pointer in the EntryStream.
-      def pos
-        @read
-      end
-
-        # Sets the current read pointer to the beginning of the EntryStream.
-      def rewind
-        raise NonSeekableStream unless @io.respond_to?(:pos=)
-        @io.pos = @orig_pos
-        @read = 0
-      end
-
-      def bytes_read
-        @read
-      end
-
-        # Returns the full and proper name of the entry.
-      def full_name
-        if @prefix != ""
-          File.join(@prefix, @name)
-        else
-          @name
-        end
-      end
-
-        # Closes the entry.
-      def close
-        invalidate
-      end
-
-      private
-      def invalidate
-        extend InvalidEntryStream
-      end
-    end
-
-      # With no associated block, +Reader::open+ is a synonym for
-      # +Reader::new+. If the optional code block is given, it will be passed
-      # the new _writer_ as an argument and the Reader object will
-      # automatically be closed when the block terminates. In this instance,
-      # +Reader::open+ returns the value of the block.
-    def self.open(anIO)
-      reader = Reader.new(anIO)
-
-      return reader unless block_given?
-
-      begin
-        res = yield reader
-      ensure
-        reader.close
-      end
-      
-      res
-    end
-
-      # Creates and returns a new Reader object.
-    def initialize(anIO)
-      @io     = anIO
-      @init_pos = anIO.pos
-    end
-
-      # Iterates through each entry in the data stream.
-    def each(&block)
-      each_entry(&block)
-    end
-
-      # Resets the read pointer to the beginning of data stream. Do not call
-      # this during a #each or #each_entry iteration. This only works with
-      # random access data streams that respond to #rewind and #pos.
-    def rewind
-      if @init_pos == 0
-        raise NonSeekableStream unless @io.respond_to?(:rewind)
-        @io.rewind
-      else
-        raise NonSeekableStream unless @io.respond_to?(:pos=)
-        @io.pos = @init_pos
-      end
-    end
-
-      # Iterates through each entry in the data stream.
-    def each_entry
-      loop do
-        return if @io.eof?
-
-        header = Archive::Tar::PosixHeader.new_from_stream(@io)
-        return if header.empty?
-
-        entry = EntryStream.new(header, @io)
-        size  = entry.size
-
-        yield entry
-
-        skip = (512 - (size % 512)) % 512
-
-        if @io.respond_to?(:seek)
-            # avoid reading...
-          @io.seek(size - entry.bytes_read, IO::SEEK_CUR)
-        else
-          pending = size - entry.bytes_read
-          while pending > 0
-            bread = @io.read([pending, 4096].min).size
-            raise UnexpectedEOF if @io.eof?
-            pending -= bread
-          end
-        end
-        @io.read(skip) # discard trailing zeros
-          # make sure nobody can use #read, #getc or #rewind anymore
-        entry.close
-      end
-    end
-
-    def close
-    end
-  end
-
-    # Wraps a Archive::Tar::Minitar::Reader with convenience methods and
-    # wrapped stream management; Input only works with random access data
-    # streams. See Input::new for details.
-  class Input
-    include Enumerable
-
-      # With no associated block, +Input::open+ is a synonym for
-      # +Input::new+. If the optional code block is given, it will be passed
-      # the new _writer_ as an argument and the Input object will
-      # automatically be closed when the block terminates. In this instance,
-      # +Input::open+ returns the value of the block.
-    def self.open(input)
-      stream = Input.new(input)
-      return stream unless block_given?
-
-      begin
-        res = yield stream
-      ensure
-        stream.close
-      end
-
-      res
-    end
-
-      # Creates a new Input object. If +input+ is a stream object that responds
-      # to #read), then it will simply be wrapped. Otherwise, one will be
-      # created and opened using Kernel#open. When Input#close is called, the
-      # stream object wrapped will be closed.
-    def initialize(input)
-      if input.respond_to?(:read)
-        @io = input
-      else
-        @io = open(input, "rb")
-      end
-      @tarreader = Archive::Tar::Minitar::Reader.new(@io)
-    end
-
-      # Iterates through each entry and rewinds to the beginning of the stream
-      # when finished.
-    def each(&block)
-      @tarreader.each { |entry| yield entry }
-    ensure
-      @tarreader.rewind
-    end
-
-      # Extracts the current +entry+ to +destdir+. If a block is provided, it
-      # yields an +action+ Symbol, the full name of the file being extracted
-      # (+name+), and a Hash of statistical information (+stats+).
-      #
-      # The +action+ will be one of:
-      # <tt>:dir</tt>::           The +entry+ is a directory.
-      # <tt>:file_start</tt>::    The +entry+ is a file; the extract of the
-      #                           file is just beginning.
-      # <tt>:file_progress</tt>:: Yielded every 4096 bytes during the extract
-      #                           of the +entry+.
-      # <tt>:file_done</tt>::     Yielded when the +entry+ is completed.
-      #
-      # The +stats+ hash contains the following keys:
-      # <tt>:current</tt>:: The current total number of bytes read in the
-      #                     +entry+.
-      # <tt>:currinc</tt>:: The current number of bytes read in this read
-      #                     cycle.
-      # <tt>:entry</tt>::   The entry being extracted; this is a
-      #                     Reader::EntryStream, with all methods thereof.
-    def extract_entry(destdir, entry) # :yields action, name, stats:
-      stats = {
-        :current  => 0,
-        :currinc  => 0,
-        :entry    => entry
-      }
-
-      if entry.directory?
-        dest = File.join(destdir, entry.full_name)
-
-        yield :dir, entry.full_name, stats if block_given?
-
-        if Archive::Tar::Minitar.dir?(dest)
-          begin
-            FileUtils.chmod(entry.mode, dest)
-          rescue Exception
-            nil
-          end
-        else
-          FileUtils.mkdir_p(dest, :mode => entry.mode)
-          FileUtils.chmod(entry.mode, dest)
-        end
-
-        fsync_dir(dest)
-        fsync_dir(File.join(dest, ".."))
-        return
-      else # it's a file
-        destdir = File.join(destdir, File.dirname(entry.full_name))
-        FileUtils.mkdir_p(destdir, :mode => 0755)
-
-        destfile = File.join(destdir, File.basename(entry.full_name))
-        FileUtils.chmod(0600, destfile) rescue nil  # Errno::ENOENT
-
-        yield :file_start, entry.full_name, stats if block_given?
-
-        File.open(destfile, "wb", entry.mode) do |os|
-          loop do
-            data = entry.read(4096)
-            break unless data
-
-            stats[:currinc] = os.write(data)
-            stats[:current] += stats[:currinc]
-
-            yield :file_progress, entry.full_name, stats if block_given?
-          end
-          os.fsync
-        end
-
-        FileUtils.chmod(entry.mode, destfile)
-        fsync_dir(File.dirname(destfile))
-        fsync_dir(File.join(File.dirname(destfile), ".."))
-
-        yield :file_done, entry.full_name, stats if block_given?
-      end
-    end
-
-      # Returns the Reader object for direct access.
-    def tar
-      @tarreader
-    end
-
-      # Closes the Reader object and the wrapped data stream.
-    def close
-      @io.close
-      @tarreader.close
-    end
-
-  private
-    def fsync_dir(dirname)
-        # make sure this hits the disc
-      dir = open(dirname, 'rb')
-      dir.fsync
-    rescue # ignore IOError if it's an unpatched (old) Ruby
-      nil
-    ensure
-      dir.close if dir rescue nil
-    end
-  end
-
-    # Wraps a Archive::Tar::Minitar::Writer with convenience methods and
-    # wrapped stream management; Output only works with random access data
-    # streams. See Output::new for details.
-  class Output
-      # With no associated block, +Output::open+ is a synonym for
-      # +Output::new+. If the optional code block is given, it will be passed
-      # the new _writer_ as an argument and the Output object will
-      # automatically be closed when the block terminates. In this instance,
-      # +Output::open+ returns the value of the block.
-    def self.open(output)
-      stream = Output.new(output)
-      return stream unless block_given?
-
-      begin
-        res = yield stream
-      ensure
-        stream.close
-      end
-
-      res
-    end
-
-      # Creates a new Output object. If +output+ is a stream object that
-      # responds to #read), then it will simply be wrapped. Otherwise, one will
-      # be created and opened using Kernel#open. When Output#close is called,
-      # the stream object wrapped will be closed.
-    def initialize(output)
-      if output.respond_to?(:write)
-        @io = output
-      else
-        @io = ::File.open(output, "wb")
-      end
-      @tarwriter = Archive::Tar::Minitar::Writer.new(@io)
-    end
-
-      # Returns the Writer object for direct access.
-    def tar
-      @tarwriter
-    end
-
-      # Closes the Writer object and the wrapped data stream.
-    def close
-      @tarwriter.close
-      @io.close
-    end
-  end
-
-  class << self
-      # Tests if +path+ refers to a directory. Fixes an apparently
-      # corrupted <tt>stat()</tt> call on Windows.
-    def dir?(path)
-      File.directory?((path[-1] == ?/) ? path : "#{path}/")
-    end
-
-      # A convenience method for wrapping Archive::Tar::Minitar::Input.open
-      # (mode +r+) and Archive::Tar::Minitar::Output.open (mode +w+). No other
-      # modes are currently supported.
-    def open(dest, mode = "r", &block)
-      case mode
-      when "r"
-        Input.open(dest, &block)
-      when "w"
-        Output.open(dest, &block)
-      else
-        raise "Unknown open mode for Archive::Tar::Minitar.open."
-      end
-    end
-
-      # A convenience method to packs the file provided. +entry+ may either be
-      # a filename (in which case various values for the file (see below) will
-      # be obtained from <tt>File#stat(entry)</tt> or a Hash with the fields:
-      #
-      # <tt>:name</tt>::  The filename to be packed into the tarchive.
-      #                   *REQUIRED*.
-      # <tt>:mode</tt>::  The mode to be applied.
-      # <tt>:uid</tt>::   The user owner of the file. (Ignored on Windows.)
-      # <tt>:gid</tt>::   The group owner of the file. (Ignored on Windows.)
-      # <tt>:mtime</tt>:: The modification Time of the file.
-      #
-      # During packing, if a block is provided, #pack_file yields an +action+
-      # Symol, the full name of the file being packed, and a Hash of
-      # statistical information, just as with
-      # Archive::Tar::Minitar::Input#extract_entry.
-      #
-      # The +action+ will be one of:
-      # <tt>:dir</tt>::           The +entry+ is a directory.
-      # <tt>:file_start</tt>::    The +entry+ is a file; the extract of the
-      #                           file is just beginning.
-      # <tt>:file_progress</tt>:: Yielded every 4096 bytes during the extract
-      #                           of the +entry+.
-      # <tt>:file_done</tt>::     Yielded when the +entry+ is completed.
-      #
-      # The +stats+ hash contains the following keys:
-      # <tt>:current</tt>:: The current total number of bytes read in the
-      #                     +entry+.
-      # <tt>:currinc</tt>:: The current number of bytes read in this read
-      #                     cycle.
-      # <tt>:name</tt>::    The filename to be packed into the tarchive.
-      #                     *REQUIRED*.
-      # <tt>:mode</tt>::    The mode to be applied.
-      # <tt>:uid</tt>::     The user owner of the file. (+nil+ on Windows.)
-      # <tt>:gid</tt>::     The group owner of the file. (+nil+ on Windows.)
-      # <tt>:mtime</tt>::   The modification Time of the file.
-    def pack_file(entry, outputter) #:yields action, name, stats:
-      outputter = outputter.tar if outputter.kind_of?(Archive::Tar::Minitar::Output)
-
-      stats = {}
-
-      if entry.kind_of?(Hash)
-        name = entry[:name]
-
-        entry.each { |kk, vv| stats[kk] = vv unless vv.nil? }
-      else
-        name = entry
-      end
-      
-      name = name.sub(%r{\./}, '')
-      stat = File.stat(name)
-      stats[:mode]   ||= stat.mode
-      stats[:mtime]  ||= stat.mtime
-      stats[:size]   = stat.size
-
-      if RUBY_PLATFORM =~ /win32/
-        stats[:uid]  = nil
-        stats[:gid]  = nil
-      else
-        stats[:uid]  ||= stat.uid
-        stats[:gid]  ||= stat.gid
-      end
-
-      case
-      when File.file?(name)
-        outputter.add_file_simple(name, stats) do |os|
-          stats[:current] = 0
-          yield :file_start, name, stats if block_given?
-          File.open(name, "rb") do |ff|
-            until ff.eof?
-              stats[:currinc] = os.write(ff.read(4096))
-              stats[:current] += stats[:currinc]
-              yield :file_progress, name, stats if block_given?
-            end
-          end
-          yield :file_done, name, stats if block_given?
-        end
-      when dir?(name)
-        yield :dir, name, stats if block_given?
-        outputter.mkdir(name, stats)
-      else
-        raise "Don't yet know how to pack this type of file."
-      end
-    end
-
-      # A convenience method to pack files specified by +src+ into +dest+. If
-      # +src+ is an Array, then each file detailed therein will be packed into
-      # the resulting Archive::Tar::Minitar::Output stream; if +recurse_dirs+
-      # is true, then directories will be recursed.
-      #
-      # If +src+ is an Array, it will be treated as the argument to Find.find;
-      # all files matching will be packed.
-    def pack(src, dest, recurse_dirs = true, &block)
-      Output.open(dest) do |outp|
-        if src.kind_of?(Array)
-          src.each do |entry|
-            pack_file(entry, outp, &block)
-            if dir?(entry) and recurse_dirs
-              Dir["#{entry}/**/**"].each do |ee|
-                pack_file(ee, outp, &block)
-              end
-            end
-          end
-        else
-          Find.find(src) do |entry|
-            pack_file(entry, outp, &block)
-          end
-        end
-      end
-    end
-
-      # A convenience method to unpack files from +src+ into the directory
-      # specified by +dest+. Only those files named explicitly in +files+
-      # will be extracted.
-    def unpack(src, dest, files = [], &block)
-      Input.open(src) do |inp|
-        if File.exist?(dest) and (not dir?(dest))
-          raise "Can't unpack to a non-directory."
-        elsif not File.exist?(dest)
-          FileUtils.mkdir_p(dest)
-        end
-
-        inp.each do |entry|
-          if files.empty? or files.include?(entry.full_name)
-            inp.extract_entry(dest, entry, &block)
-          end
-        end
-      end
-    end
-  end
-end