logstash-filter-cache-redis 0.1.0 → 0.2.0

data/vendor/bundle/jruby/1.9/gems/jruby-openssl-0.9.19-java/lib/jopenssl18/openssl/ssl.rb

@@ -0,0 +1 @@
+require 'openssl'

data/vendor/bundle/jruby/1.9/gems/jruby-openssl-0.9.19-java/lib/jopenssl18/openssl/x509-internal.rb

@@ -0,0 +1,110 @@
+=begin
+= $RCSfile$ -- Ruby-space definitions that completes C-space funcs for X509 and subclasses
+
+= Info
+  'OpenSSL for Ruby 2' project
+  Copyright (C) 2002  Michal Rokos <m.rokos@sh.cvut.cz>
+  All rights reserved.
+
+= Licence
+  This program is licenced under the same licence as Ruby.
+  (See the file 'LICENCE'.)
+
+= Version
+  $Id$
+=end
+
+module OpenSSL
+  module X509
+    class Name
+      module RFC2253DN
+        Special = ',=+<>#;'
+        HexChar = /[0-9a-fA-F]/
+        HexPair = /#{HexChar}#{HexChar}/
+        HexString = /#{HexPair}+/
+        Pair = /\\(?:[#{Special}]|\\|"|#{HexPair})/
+        StringChar = /[^#{Special}\\"]/
+        QuoteChar = /[^\\"]/
+        AttributeType = /[a-zA-Z][0-9a-zA-Z]*|[0-9]+(?:\.[0-9]+)*/
+        AttributeValue = /
+          (?!["#])((?:#{StringChar}|#{Pair})*)|
+          \#(#{HexString})|
+          "((?:#{QuoteChar}|#{Pair})*)"
+        /x
+        TypeAndValue = /\A(#{AttributeType})=#{AttributeValue}/
+
+        module_function
+
+        def expand_pair(str)
+          return nil unless str
+          return str.gsub(Pair){
+            pair = $&
+            case pair.size
+            when 2 then pair[1,1]
+            when 3 then Integer("0x#{pair[1,2]}").chr
+            else raise OpenSSL::X509::NameError, "invalid pair: #{str}"
+            end
+          }
+        end
+
+        def expand_hexstring(str)
+          return nil unless str
+          der = str.gsub(HexPair){$&.to_i(16).chr }
+          a1 = OpenSSL::ASN1.decode(der)
+          return a1.value, a1.tag
+        end
+
+        def expand_value(str1, str2, str3)
+          value = expand_pair(str1)
+          value, tag = expand_hexstring(str2) unless value
+          value = expand_pair(str3) unless value
+          return value, tag
+        end
+
+        def scan(dn)
+          str = dn
+          ary = []
+          while true
+            if md = TypeAndValue.match(str)
+              matched = md.to_s
+              remain = md.post_match
+              type = md[1]
+              value, tag = expand_value(md[2], md[3], md[4]) rescue nil
+              if value
+                type_and_value = [type, value]
+                type_and_value.push(tag) if tag
+                ary.unshift(type_and_value)
+                if remain.length > 2 && remain[0] == ?,
+                  str = remain[1..-1]
+                  next
+                elsif remain.length > 2 && remain[0] == ?+
+                  raise OpenSSL::X509::NameError,
+                    "multi-valued RDN is not supported: #{dn}"
+                elsif remain.empty?
+                  break
+                end
+              end
+            end
+            msg_dn = dn[0, dn.length - str.length] + " =>" + str
+            raise OpenSSL::X509::NameError, "malformed RDN: #{msg_dn}"
+          end
+          return ary
+        end
+      end
+
+      class <<self
+        def parse_rfc2253(str, template=OBJECT_TYPE_TEMPLATE)
+          ary = OpenSSL::X509::Name::RFC2253DN.scan(str)
+          self.new(ary, template)
+        end
+
+        def parse_openssl(str, template=OBJECT_TYPE_TEMPLATE)
+          ary = str.scan(/\s*([^\/,]+)\s*/).collect{|i| i[0].split("=", 2) }
+          self.new(ary, template)
+        end
+
+        alias parse parse_openssl
+      end
+    end
+  end
+end

data/vendor/bundle/jruby/1.9/gems/jruby-openssl-0.9.19-java/lib/jopenssl18/openssl/x509.rb

@@ -0,0 +1 @@
+require 'openssl'

data/vendor/bundle/jruby/1.9/gems/jruby-openssl-0.9.19-java/lib/jopenssl19/openssl.rb

@@ -0,0 +1,22 @@
+=begin
+= $RCSfile$ -- Loader for all OpenSSL C-space and Ruby-space definitions
+
+= Info
+  'OpenSSL for Ruby 2' project
+  Copyright (C) 2002  Michal Rokos <m.rokos@sh.cvut.cz>
+  All rights reserved.
+
+= Licence
+  This program is licenced under the same licence as Ruby.
+  (See the file 'LICENCE'.)
+
+= Version
+  $Id$
+=end
+
+require 'openssl/bn'
+require 'openssl/cipher'
+require 'openssl/config'
+require 'openssl/digest'
+require 'openssl/ssl-internal'
+require 'openssl/x509-internal'

data/vendor/bundle/jruby/1.9/gems/jruby-openssl-0.9.19-java/lib/jopenssl19/openssl/bn.rb

@@ -0,0 +1,29 @@
+#--
+#
+# $RCSfile$
+#
+# = Ruby-space definitions that completes C-space funcs for BN
+#
+# = Info
+# 'OpenSSL for Ruby 2' project
+# Copyright (C) 2002  Michal Rokos <m.rokos@sh.cvut.cz>
+# All rights reserved.
+#
+# = Licence
+# This program is licenced under the same licence as Ruby.
+# (See the file 'LICENCE'.)
+#
+# = Version
+# $Id$
+#
+#++
+
+##
+# Add double dispatch to Integer
+#
+class Integer
+  def to_bn
+    OpenSSL::BN::new(self)
+  end
+end # Integer
+

data/vendor/bundle/jruby/1.9/gems/jruby-openssl-0.9.19-java/lib/jopenssl19/openssl/buffering.rb

@@ -0,0 +1,449 @@
+=begin
+= $RCSfile$ -- Buffering mix-in module.
+
+= Info
+  'OpenSSL for Ruby 2' project
+  Copyright (C) 2001 GOTOU YUUZOU <gotoyuzo@notwork.org>
+  All rights reserved.
+
+= Licence
+  This program is licenced under the same licence as Ruby.
+  (See the file 'LICENCE'.)
+
+= Version
+  $Id$
+=end
+
+##
+# OpenSSL IO buffering mix-in module.
+#
+# This module allows an OpenSSL::SSL::SSLSocket to behave like an IO.
+
+module OpenSSL::Buffering
+  include Enumerable
+
+  ##
+  # The "sync mode" of the SSLSocket.
+  #
+  # See IO#sync for full details.
+
+  attr_accessor :sync
+
+  ##
+  # Default size to read from or write to the SSLSocket for buffer operations.
+
+  BLOCK_SIZE = 1024*16
+
+  def initialize(*args)
+    @eof = false
+    @rbuffer = ""
+    @sync = @io.sync
+  end
+
+  #
+  # for reading.
+  #
+  private
+
+  ##
+  # Fills the buffer from the underlying SSLSocket
+
+  def fill_rbuff
+    begin
+      @rbuffer << self.sysread(BLOCK_SIZE)
+    rescue Errno::EAGAIN
+      retry
+    rescue EOFError
+      @eof = true
+    end
+  end
+
+  ##
+  # Consumes +size+ bytes from the buffer
+
+  def consume_rbuff(size=nil)
+    if @rbuffer.empty?
+      nil
+    else
+      size = @rbuffer.size unless size
+      ret = @rbuffer[0, size]
+      @rbuffer[0, size] = ""
+      ret
+    end
+  end
+
+  public
+
+  ##
+  # Reads +size+ bytes from the stream.  If +buf+ is provided it must
+  # reference a string which will receive the data.
+  #
+  # See IO#read for full details.
+
+  def read(size=nil, buf=nil)
+    if size == 0
+      if buf
+        buf.clear
+        return buf
+      else
+        return ""
+      end
+    end
+    until @eof
+      break if size && size <= @rbuffer.size
+      fill_rbuff
+    end
+    ret = consume_rbuff(size) || ""
+    if buf
+      buf.replace(ret)
+      ret = buf
+    end
+    (size && ret.empty?) ? nil : ret
+  end
+
+  ##
+  # Reads at most +maxlen+ bytes from the stream.  If +buf+ is provided it
+  # must reference a string which will receive the data.
+  #
+  # See IO#readpartial for full details.
+
+  def readpartial(maxlen, buf=nil)
+    if maxlen == 0
+      if buf
+        buf.clear
+        return buf
+      else
+        return ""
+      end
+    end
+    if @rbuffer.empty?
+      begin
+        return sysread(maxlen, buf)
+      rescue Errno::EAGAIN
+        retry
+      end
+    end
+    ret = consume_rbuff(maxlen)
+    if buf
+      buf.replace(ret)
+      ret = buf
+    end
+    raise EOFError if ret.empty?
+    ret
+  end
+
+  ##
+  # Reads at most +maxlen+ bytes in the non-blocking manner.
+  #
+  # When no data can be read without blocking it raises
+  # OpenSSL::SSL::SSLError extended by IO::WaitReadable or IO::WaitWritable.
+  #
+  # IO::WaitReadable means SSL needs to read internally so read_nonblock
+  # should be called again when the underlying IO is readable.
+  #
+  # IO::WaitWritable means SSL needs to write internally so read_nonblock
+  # should be called again after the underlying IO is writable.
+  #
+  # OpenSSL::Buffering#read_nonblock needs two rescue clause as follows:
+  #
+  #   # emulates blocking read (readpartial).
+  #   begin
+  #     result = ssl.read_nonblock(maxlen)
+  #   rescue IO::WaitReadable
+  #     IO.select([io])
+  #     retry
+  #   rescue IO::WaitWritable
+  #     IO.select(nil, [io])
+  #     retry
+  #   end
+  #
+  # Note that one reason that read_nonblock writes to the underlying IO is
+  # when the peer requests a new TLS/SSL handshake.  See openssl the FAQ for
+  # more details.  http://www.openssl.org/support/faq.html
+
+  def read_nonblock(maxlen, buf=nil)
+    if maxlen == 0
+      if buf
+        buf.clear
+        return buf
+      else
+        return ""
+      end
+    end
+    if @rbuffer.empty?
+      return sysread_nonblock(maxlen, buf)
+    end
+    ret = consume_rbuff(maxlen)
+    if buf
+      buf.replace(ret)
+      ret = buf
+    end
+    raise EOFError if ret.empty?
+    ret
+  end
+
+  ##
+  # Reads the next "line+ from the stream.  Lines are separated by +eol+.  If
+  # +limit+ is provided the result will not be longer than the given number of
+  # bytes.
+  #
+  # +eol+ may be a String or Regexp.
+  #
+  # Unlike IO#gets the line read will not be assigned to +$_+.
+  #
+  # Unlike IO#gets the separator must be provided if a limit is provided.
+
+  def gets(eol=$/, limit=nil)
+    idx = @rbuffer.index(eol)
+    until @eof
+      break if idx
+      fill_rbuff
+      idx = @rbuffer.index(eol)
+    end
+    if eol.is_a?(Regexp)
+      size = idx ? idx+$&.size : nil
+    else
+      size = idx ? idx+eol.size : nil
+    end
+    if limit and limit >= 0
+      size = [size, limit].min
+    end
+    consume_rbuff(size)
+  end
+
+  ##
+  # Executes the block for every line in the stream where lines are separated
+  # by +eol+.
+  #
+  # See also #gets
+
+  def each(eol=$/)
+    while line = self.gets(eol)
+      yield line
+    end
+  end
+  alias each_line each
+
+  ##
+  # Reads lines from the stream which are separated by +eol+.
+  #
+  # See also #gets
+
+  def readlines(eol=$/)
+    ary = []
+    while line = self.gets(eol)
+      ary << line
+    end
+    ary
+  end
+
+  ##
+  # Reads a line from the stream which is separated by +eol+.
+  #
+  # Raises EOFError if at end of file.
+
+  def readline(eol=$/)
+    raise EOFError if eof?
+    gets(eol)
+  end
+
+  ##
+  # Reads one character from the stream.  Returns nil if called at end of
+  # file.
+
+  def getc
+    read(1)
+  end
+
+  ##
+  # Calls the given block once for each byte in the stream.
+
+  def each_byte # :yields: byte
+    while c = getc
+      yield(c.ord)
+    end
+  end
+
+  ##
+  # Reads a one-character string from the stream.  Raises an EOFError at end
+  # of file.
+
+  def readchar
+    raise EOFError if eof?
+    getc
+  end
+
+  ##
+  # Pushes character +c+ back onto the stream such that a subsequent buffered
+  # character read will return it.
+  #
+  # Unlike IO#getc multiple bytes may be pushed back onto the stream.
+  #
+  # Has no effect on unbuffered reads (such as #sysread).
+
+  def ungetc(c)
+    @rbuffer[0,0] = c.chr
+  end
+
+  ##
+  # Returns true if the stream is at file which means there is no more data to
+  # be read.
+
+  def eof?
+    fill_rbuff if !@eof && @rbuffer.empty?
+    @eof && @rbuffer.empty?
+  end
+  alias eof eof?
+
+  #
+  # for writing.
+  #
+  private
+
+  ##
+  # Writes +s+ to the buffer.  When the buffer is full or #sync is true the
+  # buffer is flushed to the underlying socket.
+
+  def do_write(s)
+    @wbuffer = "" unless defined? @wbuffer
+    @wbuffer << s
+    @wbuffer.force_encoding(Encoding::BINARY)
+    @sync ||= false
+    if @sync or @wbuffer.size > BLOCK_SIZE or idx = @wbuffer.rindex($/)
+      remain = idx ? idx + $/.size : @wbuffer.length
+      nwritten = 0
+      while remain > 0
+        str = @wbuffer[nwritten,remain]
+        begin
+          nwrote = syswrite(str)
+        rescue Errno::EAGAIN
+          retry
+        end
+        remain -= nwrote
+        nwritten += nwrote
+      end
+      @wbuffer[0,nwritten] = ""
+    end
+  end
+
+  public
+
+  ##
+  # Writes +s+ to the stream.  If the argument is not a string it will be
+  # converted using String#to_s.  Returns the number of bytes written.
+
+  def write(s)
+    do_write(s)
+    s.bytesize
+  end
+
+  ##
+  # Writes +str+ in the non-blocking manner.
+  #
+  # If there is buffered data, it is flushed first.  This may block.
+  #
+  # write_nonblock returns number of bytes written to the SSL connection.
+  #
+  # When no data can be written without blocking it raises
+  # OpenSSL::SSL::SSLError extended by IO::WaitReadable or IO::WaitWritable.
+  #
+  # IO::WaitReadable means SSL needs to read internally so write_nonblock
+  # should be called again after the underlying IO is readable.
+  #
+  # IO::WaitWritable means SSL needs to write internally so write_nonblock
+  # should be called again after underlying IO is writable.
+  #
+  # So OpenSSL::Buffering#write_nonblock needs two rescue clause as follows.
+  #
+  #   # emulates blocking write.
+  #   begin
+  #     result = ssl.write_nonblock(str)
+  #   rescue IO::WaitReadable
+  #     IO.select([io])
+  #     retry
+  #   rescue IO::WaitWritable
+  #     IO.select(nil, [io])
+  #     retry
+  #   end
+  #
+  # Note that one reason that write_nonblock reads from the underlying IO
+  # is when the peer requests a new TLS/SSL handshake.  See the openssl FAQ
+  # for more details.  http://www.openssl.org/support/faq.html
+
+  def write_nonblock(s)
+    flush
+    syswrite_nonblock(s)
+  end
+
+  ##
+  # Writes +s+ to the stream.  +s+ will be converted to a String using
+  # String#to_s.
+
+  def << (s)
+    do_write(s)
+    self
+  end
+
+  ##
+  # Writes +args+ to the stream along with a record separator.
+  #
+  # See IO#puts for full details.
+
+  def puts(*args)
+    s = ""
+    if args.empty?
+      s << "\n"
+    end
+    args.each{|arg|
+      s << arg.to_s
+      if $/ && /\n\z/ !~ s
+        s << "\n"
+      end
+    }
+    do_write(s)
+    nil
+  end
+
+  ##
+  # Writes +args+ to the stream.
+  #
+  # See IO#print for full details.
+
+  def print(*args)
+    s = ""
+    args.each{ |arg| s << arg.to_s }
+    do_write(s)
+    nil
+  end
+
+  ##
+  # Formats and writes to the stream converting parameters under control of
+  # the format string.
+  #
+  # See Kernel#sprintf for format string details.
+
+  def printf(s, *args)
+    do_write(s % args)
+    nil
+  end
+
+  ##
+  # Flushes buffered data to the SSLSocket.
+
+  def flush
+    osync = @sync
+    @sync = true
+    do_write ""
+    return self
+  ensure
+    @sync = osync
+  end
+
+  ##
+  # Closes the SSLSocket and flushes any unwritten data.
+
+  def close
+    flush rescue nil
+    sysclose
+  end
+end