locomotivecms 3.0.0.pre.alpha

data/spec/dummy/config/environments/production.rb

@@ -0,0 +1,44 @@
+Dummy::Application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # In the development environment your application's code is reloaded on
+  # every request. This slows down response time but is perfect for development
+  # since you don't have to restart the web server when you make code changes.
+  config.cache_classes = true
+
+  # Do not eager load code on boot.
+  config.eager_load = true
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = true
+
+  # Don't care if the mailer can't send.
+  config.action_mailer.raise_delivery_errors = false
+
+  # Print deprecation notices to the Rails logger.
+  config.active_support.deprecation = :log
+
+  # Debug mode disables concatenation and preprocessing of assets.
+  # This option may cause significant delays in view rendering with a large
+  # number of complex assets.
+  config.assets.debug = false #true
+
+  config.assets.compress = false
+
+  # Adds additional error checking when serving assets at runtime.
+  # Checks for improperly declared sprockets dependencies.
+  # Raises helpful error messages.
+  config.assets.raise_runtime_errors = true
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+
+  # MockSmtp settings
+  config.action_mailer.delivery_method = :smtp
+  config.action_mailer.smtp_settings = {
+    :address => "localhost",
+    :port => 1025,
+    :domain => "example.com"
+  }
+end

data/spec/dummy/config/environments/test.rb

@@ -0,0 +1,39 @@
+Dummy::Application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # The test environment is used exclusively to run your application's
+  # test suite. You never need to work with it otherwise. Remember that
+  # your test database is "scratch space" for the test suite and is wiped
+  # and recreated between test runs. Don't rely on the data there!
+  config.cache_classes = true
+
+  # Do not eager load code on boot. This avoids loading your whole application
+  # just for the purpose of running a single test. If you are using a tool that
+  # preloads Rails for running tests, you may have to set it to true.
+  config.eager_load = false
+
+  # Configure static asset server for tests with Cache-Control for performance.
+  config.serve_static_files  = true
+  config.static_cache_control = 'public, max-age=3600'
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Raise exceptions instead of rendering exception templates.
+  config.action_dispatch.show_exceptions = false
+
+  # Disable request forgery protection in test environment.
+  config.action_controller.allow_forgery_protection = false
+
+  # Tell Action Mailer not to deliver emails to the real world.
+  # The :test delivery method accumulates sent emails in the
+  # ActionMailer::Base.deliveries array.
+  config.action_mailer.delivery_method = :test
+
+  # Print deprecation notices to the stderr.
+  config.active_support.deprecation = :stderr
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+end

data/spec/dummy/config/initializers/assets.rb

@@ -0,0 +1,13 @@
+# Be sure to restart your server when you modify this file.
+
+# Version of your assets, change this if you want to expire all your assets.
+Rails.application.config.assets.version = '1.0'
+
+# Enable the asset pipeline
+# Rails.application.config.assets.enabled = true
+# Rails.application.config.assets.initialize_on_precompile = false
+
+# Precompile additional assets.
+# application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
+# Rails.application.config.assets.precompile += %w( search.js )
+Rails.application.config.assets.precompile += ['locomotive_misc.js']

data/spec/dummy/config/initializers/carrierwave.rb

@@ -0,0 +1,8 @@
+CarrierWave.configure do |config|
+
+  config.cache_dir = File.join(Rails.root, 'tmp', 'uploads')
+
+  config.storage = :file
+  config.root = File.join(Rails.root, 'public')
+
+end

data/spec/dummy/config/initializers/cookies_serializer.rb

@@ -0,0 +1,3 @@
+# Be sure to restart your server when you modify this file.
+
+Rails.application.config.action_dispatch.cookies_serializer = :json

data/spec/dummy/config/initializers/devise.rb

@@ -0,0 +1,190 @@
+# Use this hook to configure devise mailer, warden hooks and so forth. The first
+# four configuration values can also be set straight in your models.
+Devise.setup do |config|
+  # ==> Mailer Configuration
+  # Configure the e-mail address which will be shown in DeviseMailer.
+  config.mailer_sender = 'sender@dummyapp.org'
+
+  # Configure the class responsible to send e-mails.
+  # config.mailer = "Locomotive::DeviseMailer"
+
+  # ==> ORM configuration
+  # Load and configure the ORM. Supports :active_record (default) and
+  # :mongoid (bson_ext recommended) by default. Other ORMs may be
+  # available as additional gems.
+  require 'devise/orm/mongoid'
+
+  # ==> Configuration for any authentication mechanism
+  # Configure which keys are used when authenticating a user. The default is
+  # just :email. You can configure it to use [:username, :subdomain], so for
+  # authenticating a user, both parameters are required. Remember that those
+  # parameters are used only when authenticating and not when retrieving from
+  # session. If you need permissions, you should implement that in a before filter.
+  # You can also supply a hash where the value is a boolean determining whether
+  # or not authentication should be aborted when the value is not present.
+  # config.authentication_keys = [ :email ]
+
+  # Configure parameters from the request object used for authentication. Each entry
+  # given should be a request method and it will automatically be passed to the
+  # find_for_authentication method and considered in your model lookup. For instance,
+  # if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
+  # The same considerations mentioned for authentication_keys also apply to request_keys.
+  # config.request_keys = []
+
+  # Configure which authentication keys should be case-insensitive.
+  # These keys will be downcased upon creating or modifying a user and when used
+  # to authenticate or find a user. Default is :email.
+  config.case_insensitive_keys = [ :email ]
+
+  # Tell if authentication through request.params is enabled. True by default.
+  # config.params_authenticatable = true
+
+  # Tell if authentication through HTTP Basic Auth is enabled. False by default.
+  # config.http_authenticatable = false
+
+  # If http headers should be returned for AJAX requests. True by default.
+  # config.http_authenticatable_on_xhr = true
+
+  # The realm used in Http Basic Authentication. "Application" by default.
+  # config.http_authentication_realm = "Application"
+
+  # ==> Configuration for :database_authenticatable
+  # For bcrypt, this is the cost for hashing the password and defaults to 10. If
+  # using other encryptors, it sets how many times you want the password re-encrypted.
+  config.stretches = 10
+
+  # Setup a pepper to generate the encrypted password.
+  # config.pepper = "de368d6a1517489510a2ae145328ff1c238f03b02da8f57032936a353835e2ca20561decfb5f7bfafad095fa73cee55b101ed11a0d0f913429d3d9bd114d810e"
+
+  # ==> Configuration for :confirmable
+  # The time you want to give your user to confirm his account. During this time
+  # he will be able to access your application without confirming. Default is 0.days
+  # When allow_unconfirmed_access_for is zero, the user won't be able to sign in without confirming.
+  # You can use this to let your user access some features of your application
+  # without confirming the account, but blocking it after a certain period
+  # (ie 2 days).
+  # config.allow_unconfirmed_access_for = 2.days
+
+  # Defines which key will be used when confirming an account
+  # config.confirmation_keys = [ :email ]
+
+  # ==> Configuration for :rememberable
+  # The time the user will be remembered without asking for credentials again.
+  config.remember_for = 2.weeks
+
+  # If true, extends the user's remember period when remembered via cookie.
+  # config.extend_remember_period = false
+
+  # Options to be passed to the created cookie. For instance, you can set
+  # :secure => true in order to force SSL only cookies.
+  # config.cookie_options = {}
+
+  # ==> Configuration for :validatable
+  # Range for password length. Default is 8..128.
+  config.password_length = 6..128
+
+  # Regex to use to validate the email address
+  # config.email_regexp = /\A([\w\.%\+\-]+)@([\w\-]+\.)+([\w]{2,})\z/i
+
+  # ==> Configuration for :timeoutable
+  # The time you want to timeout the user session without activity. After this
+  # time the user will be asked for credentials again. Default is 30 minutes.
+  # config.timeout_in = 30.minutes
+
+  # ==> Configuration for :lockable
+  # Defines which strategy will be used to lock an account.
+  # :failed_attempts = Locks an account after a number of failed attempts to sign in.
+  # :none            = No lock strategy. You should handle locking by yourself.
+  # config.lock_strategy = :failed_attempts
+
+  # Defines which key will be used when locking and unlocking an account
+  # config.unlock_keys = [ :email ]
+
+  # Defines which strategy will be used to unlock an account.
+  # :email = Sends an unlock link to the user email
+  # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
+  # :both  = Enables both strategies
+  # :none  = No unlock strategy. You should handle unlocking by yourself.
+  # config.unlock_strategy = :both
+
+  # Number of authentication tries before locking an account if lock_strategy
+  # is failed attempts.
+  # config.maximum_attempts = 20
+
+  # Time interval to unlock the account if :time is enabled as unlock_strategy.
+  # config.unlock_in = 1.hour
+
+  # ==> Configuration for :recoverable
+  #
+  # Defines which key will be used when recovering the password for an account
+  # config.reset_password_keys = [ :email ]
+
+  # Time interval you can reset your password with a reset password key.
+  # Don't put a too small interval or your users won't have the time to
+  # change their passwords.
+  config.reset_password_within = 2.hours
+
+  # ==> Configuration for :encryptable
+  # Allow you to use another encryption algorithm besides bcrypt (default). You can use
+  # :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1,
+  # :authlogic_sha512 (then you should set stretches above to 20 for default behavior)
+  # and :restful_authentication_sha1 (then you should set stretches to 10, and copy
+  # REST_AUTH_SITE_KEY to pepper)
+  # config.encryptor = :sha1
+
+  # ==> Configuration for :token_authenticatable
+  # Defines name of the authentication token params key
+  # config.token_authentication_key = :auth_token
+
+  # If true, authentication through token does not store user in session and needs
+  # to be supplied on each request. Useful if you are using the token as API token.
+  # config.stateless_token = false
+  # Hint: Devise 2
+  # Devise.stateless_token was removed. If you want to have stateless tokens,
+  # simply do config.skip_session_storage << :auth_token in your initializer;
+
+  # ==> Scopes configuration
+  # Turn scoped views on. Before rendering "sessions/new", it will first check for
+  # "users/sessions/new". It's turned off by default because it's slower if you
+  # are using only default views.
+  config.scoped_views = true
+
+  # Configure the default scope given to Warden. By default it's the first
+  # devise role declared in your routes (usually :user).
+  # config.default_scope = :account
+
+  # Configure sign_out behavior.
+  # Sign_out action can be scoped (i.e. /users/sign_out affects only :user scope).
+  # The default is true, which means any logout action will sign out all active scopes.
+  # config.sign_out_all_scopes = true
+
+  # ==> Navigation configuration
+  # Lists the formats that should be treated as navigational. Formats like
+  # :html, should redirect to the sign in page when the user does not have
+  # access, but formats like :xml or :json, should return 401.
+  #
+  # If you have any extra navigational formats, like :iphone or :mobile, you
+  # should add them to the navigational formats lists.
+  #
+  # The :"*/*" and "*/*" formats below is required to match Internet
+  # Explorer requests.
+  # config.navigational_formats = [:"*/*", "*/*", :html]
+
+  # The default HTTP method used to sign out a resource. Default is :get.
+  # config.sign_out_via = :get
+
+  # ==> OmniAuth
+  # Add a new OmniAuth provider. Check the wiki for more information on setting
+  # up on your models and hooks.
+  # config.omniauth :github, 'APP_ID', 'APP_SECRET', :scope => 'user,public_repo'
+
+  # ==> Warden configuration
+  # If you want to use other strategies, that are not supported by Devise, or
+  # change the failure app, you can configure them inside the config.warden block.
+  #
+  # config.warden do |manager|
+  #   manager.failure_app   = AnotherApp
+  #   manager.intercept_401 = false
+  #   manager.default_strategies(:scope => :user).unshift :some_external_strategy
+  # end
+end

data/spec/dummy/config/initializers/dragonfly.rb

@@ -0,0 +1,24 @@
+require 'dragonfly'
+
+# Configure
+Dragonfly.app(:engine).configure do
+  plugin :imagemagick,
+    convert_command:  `which convert`.strip.presence || '/usr/local/bin/convert',
+    identify_command: `which identify`.strip.presence || '/usr/local/bin/identify'
+
+  verify_urls true
+
+  secret 'a7d8613dc92256d0c0a3665a05d8af1b5efa5f66394ffca74da74eb41cc590e4'
+
+  url_format '/images/dynamic/:job/:basename.:ext'
+
+  fetch_file_whitelist /public/
+
+  fetch_url_whitelist /.+/
+end
+
+# Logger
+Dragonfly.logger = Rails.logger
+
+# Mount as middleware
+Rails.application.middleware.use Dragonfly::Middleware, :engine

data/spec/dummy/config/initializers/filter_parameter_logging.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Configure sensitive parameters which will be filtered from the log file.
+Rails.application.config.filter_parameters += [:password]

data/spec/dummy/config/initializers/haml.rb

@@ -0,0 +1,2 @@
+Haml::Template.options[:format] = :html5
+Haml::Template.options[:ugly]   = true # improve performance in dev

data/spec/dummy/config/initializers/locomotive.rb

@@ -0,0 +1,57 @@
+Locomotive.configure do |config|
+
+  # list of forbidden handles for a site because there are in conflicts with internal resources.
+  # config.reserved_site_handles = %w(sites my_account password sign_in sign_out)
+
+  # configure how many items we display in sub menu in the "Contents" section.
+  config.ui = {
+    per_page:           10
+  }
+
+  # default locale (for now, only en, de, fr, pl, pt, pt-BR, it, nl, nb, ja, cs, bg and sk are supported)
+  config.default_locale = :en
+
+  # available locales suggested to "localize" a site. You will have to pick up at least one among that list.
+  # config.site_locales = %w{en de fr pl pt pt-BR it nl nb es ru ja cs bg sk}
+
+  # tell if logs are enabled. Useful for debug purpose.
+  config.enable_logs = true
+
+  # the API authentication requires to developer to pass 2 params in the header
+  # of the request: X-Locomotive-Account-Email and X-Locomotive-Token.
+  # However, to keep backward compatability with v2.x versions, you can use
+  # the "token" request param instead although it is considered unsafe.
+  config.unsafe_token_authentication = true
+
+  # Uncomment this line to force Locomotive to redirect all requests in the
+  # back-office to https in production.
+  # config.enable_admin_ssl = Rails.env.production?
+
+  # Configure the e-mail address which will be shown in the DeviseMailer, NotificationMailer, ...etc
+  # if you do not put the domain name in the email, Locomotive will take the default domain name depending
+  # on your deployment target (server, Heroku, Bushido, ...etc)
+  #
+  # Ex:
+  # config.mailer_sender = 'support'
+  config.mailer_sender = 'support@dummy.com'
+
+  # add extra classes other than the defined content types among a site which will potentially used by the templatized pages.
+  config.models_for_templatization = %w(Foo)
+
+  # Add the checksum of a theme asset at the end of its path to allow public caching.
+  # By default, it's disabled.
+  #
+  # config.theme_assets_checksum = true
+
+  # Rack-cache settings, mainly used for the inline resizing image module. Default options:
+  # config.rack_cache = {
+  #   verbose:     true,
+  #   metastore:   URI.encode("file:#{Rails.root}/tmp/dragonfly/cache/meta"), # URI encoded in case of spaces
+  #   entitystore: URI.encode("file:#{Rails.root}/tmp/dragonfly/cache/body")
+  # }
+  # If you do want to disable it for good, just use the following syntax
+  # config.rack_cache = false
+  #
+  # Note: by default, rack/cache is disabled in the Heroku platform
+
+end

data/spec/dummy/config/initializers/secret_token.rb

@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# Your secret key for verifying the integrity of signed cookies.
+# If you change this key, all old signed cookies will become invalid!
+# Make sure the secret is at least 30 characters and all random,
+# no regular words or you'll be exposed to dictionary attacks.
+Dummy::Application.config.secret_token = '2dedaee4c6eee3735e5295881d870bd4aaa3dbae40d8662db7accc5abd68bf3159c35f38d661f96e016db3a2644012a058da4e14bd19b752b4fd31f7b742ecbe'

data/spec/dummy/config/initializers/session_store.rb

@@ -0,0 +1,3 @@
+# Be sure to restart your server when you modify this file.
+
+Rails.application.config.session_store :cookie_store, key: '_dummy_session'

data/spec/dummy/config/initializers/wrap_parameters.rb

@@ -0,0 +1,14 @@
+# Be sure to restart your server when you modify this file.
+
+# This file contains settings for ActionController::ParamsWrapper which
+# is enabled by default.
+
+# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
+ActiveSupport.on_load(:action_controller) do
+  wrap_parameters format: [:json] if respond_to?(:wrap_parameters)
+end
+
+# To enable root element in JSON for ActiveRecord objects.
+ActiveSupport.on_load(:active_record) do
+ self.include_root_in_json = false
+end

data/spec/dummy/config/locales/en.yml

@@ -0,0 +1,10 @@
+# Sample localization file for English. Add more files in this directory for other locales.
+# See https://github.com/svenfuchs/rails-i18n/tree/master/rails%2Flocale for starting points.
+
+en:
+  hello: "Hello world"
+
+  locomotive:
+    shared:
+      menu:
+        foo: My FOO menu

data/spec/dummy/config/locales/fr.yml

@@ -0,0 +1,10 @@
+# Sample localization file for French. Add more files in this directory for other locales.
+# See https://github.com/svenfuchs/rails-i18n/tree/master/rails%2Flocale for starting points.
+
+fr:
+  hello: "Bonjour tout le Monde"
+
+  locomotive:
+    shared:
+      menu:
+        foo: Mon menu FOO