lobot 2.1.0 → 3.0.0

data/chef/travis-cookbooks/ci_environment/postgresql/templates/default/debian.postgresql.conf.erb

@@ -1,234 +0,0 @@
-# -----------------------------
-# PostgreSQL configuration file
-# -----------------------------
-#
-# This file consists of lines of the form:
-#
-#   name = value
-#
-# (The "=" is optional.)  Whitespace may be used.  Comments are introduced with
-# "#" anywhere on a line.  The complete list of parameter names and allowed
-# values can be found in the PostgreSQL documentation.
-#
-# The commented-out settings shown in this file represent the default values.
-# Re-commenting a setting is NOT sufficient to revert it to the default value;
-# you need to reload the server.
-#
-# This file is read on server startup and when the server receives a SIGHUP
-# signal.  If you edit the file on a running system, you have to SIGHUP the
-# server for the changes to take effect, or use "pg_ctl reload".  Some
-# parameters, which are marked below, require a server shutdown and restart to
-# take effect.
-#
-# Any parameter can also be given as a command-line option to the server, e.g.,
-# "postgres -c log_connections=on".  Some paramters can be changed at run time
-# with the "SET" SQL command.
-#
-# Memory units:  kB = kilobytes MB = megabytes GB = gigabytes
-# Time units:    ms = milliseconds s = seconds min = minutes h = hours d = days
-
-
-#------------------------------------------------------------------------------
-# FILE LOCATIONS
-#------------------------------------------------------------------------------
-
-# The default values of these variables are driven from the -D command-line
-# option or PGDATA environment variable, represented here as ConfigDir.
-
-data_directory = '<%= node.postgresql.data_dir -%>'                     # use data in another directory
-hba_file       = '/etc/postgresql/<%= node.postgresql.version -%>/main/pg_hba.conf'       # host-based authentication file
-ident_file     = '/etc/postgresql/<%= node.postgresql.version -%>/main/pg_ident.conf'   # ident configuration file
-
-# If external_pid_file is not explicitly set, no extra PID file is written.
-external_pid_file = '/var/run/postgresql/<%= node.postgresql.version -%>-main.pid'              # write an extra PID file
-
-
-#------------------------------------------------------------------------------
-# CONNECTIONS AND AUTHENTICATION
-#------------------------------------------------------------------------------
-
-# - Connection Settings -
-
-max_connections       = <%= node.postgresql.max_connections %>
-port                  = 5432
-unix_socket_directory = '/var/run/postgresql'
-
-
-
-# - Security and Authentication -
-
-<% if node.postgresql.ssl -%>
-ssl = true
-<% else -%>
-#ssl = off
-<% end -%>
-#ssl_ciphers = 'ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH'
-
-
-# fsync, full page writes
-# turning these off for CI is reasonable
-fsync = off
-full_page_writes = off
-
-
-#------------------------------------------------------------------------------
-# RESOURCE USAGE (except WAL)
-#------------------------------------------------------------------------------
-
-# - Memory -
-
-shared_buffers = 24MB                   # min 128kB or max_connections*16kB
-                                        # (change requires restart)
-#temp_buffers = 8MB                     # min 800kB
-#max_prepared_transactions = 5          # can be 0 or more
-                                        # (change requires restart)
-# Note:  Increasing max_prepared_transactions costs ~600 bytes of shared memory
-# per transaction slot, plus lock space (see max_locks_per_transaction).
-#work_mem = 1MB                         # min 64kB
-#maintenance_work_mem = 16MB            # min 1MB
-#max_stack_depth = 2MB                  # min 100kB
-
-# - Free Space Map -
-
-<% if node.postgresql.version.to_f >= 8.4 %>
-<% # max_fsm_pages doesn't exist on 8.4+ %>
-#max_fsm_pages = 153600                 # min max_fsm_relations*16, 6 bytes each
-                                        # (change requires restart)
-<% else %>
-max_fsm_pages = 153600                  # min max_fsm_relations*16, 6 bytes each
-                                        # (change requires restart)
-<% end %>
-
-
-#------------------------------------------------------------------------------
-# ERROR REPORTING AND LOGGING
-#------------------------------------------------------------------------------
-
-# - Where to Log -
-
-#log_destination = 'stderr'             # Valid values are combinations of
-                                        # stderr, csvlog, syslog and eventlog,
-                                        # depending on platform.  csvlog
-                                        # requires logging_collector to be on.
-
-# This is used when logging to stderr:
-#logging_collector = off                # Enable capturing of stderr and csvlog
-                                        # into log files. Required to be on for
-                                        # csvlogs.
-                                        # (change requires restart)
-
-# These are only used if logging_collector is on:
-#log_directory = 'pg_log'               # directory where log files are written,
-                                        # can be absolute or relative to PGDATA
-#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log'        # log file name pattern,
-                                        # can include strftime() escapes
-#log_truncate_on_rotation = off         # If on, an existing log file of the
-                                        # same name as the new log file will be
-                                        # truncated rather than appended to.
-                                        # But such truncation only occurs on
-                                        # time-driven rotation, not on restarts
-                                        # or size-driven rotation.  Default is
-                                        # off, meaning append to existing files
-                                        # in all cases.
-#log_rotation_age = 1d                  # Automatic rotation of logfiles will
-                                        # happen after that time.  0 to disable.
-#log_rotation_size = 10MB               # Automatic rotation of logfiles will
-                                        # happen after that much log output.
-                                        # 0 to disable.
-
-# These are relevant when logging to syslog:
-#syslog_facility = 'LOCAL0'
-#syslog_ident = 'postgres'
-
-
-# - When to Log -
-
-client_min_messages = <%= node.postgresql.client_min_messages %>
-                                        # values in order of decreasing detail:
-                                        #   debug5
-                                        #   debug4
-                                        #   debug3
-                                        #   debug2
-                                        #   debug1
-                                        #   log
-                                        #   notice
-                                        #   warning
-                                        #   error
-
-#log_min_messages = notice              # values in order of decreasing detail:
-                                        #   debug5
-                                        #   debug4
-                                        #   debug3
-                                        #   debug2
-                                        #   debug1
-                                        #   info
-                                        #   notice
-                                        #   warning
-                                        #   error
-                                        #   log
-                                        #   fatal
-                                        #   panic
-
-#log_error_verbosity = default          # terse, default, or verbose messages
-
-#log_min_error_statement = error        # values in order of decreasing detail:
-                                        #   debug5
-                                        #   debug4
-                                        #   debug3
-                                        #   debug2
-                                        #   debug1
-                                        #   info
-                                        #   notice
-                                        #   warning
-                                        #   error
-                                        #   log
-                                        #   fatal
-                                        #   panic (effectively off)
-
-#log_min_duration_statement = -1        # -1 is disabled, 0 logs all statements
-                                        # and their durations, > 0 logs only
-                                        # statements running at least this time.
-
-#silent_mode = off                      # DO NOT USE without syslog or
-                                        # logging_collector
-                                        # (change requires restart)
-
-# - What to Log -
-
-#debug_print_parse = off
-#debug_print_rewritten = off
-#debug_print_plan = off
-#debug_pretty_print = off
-#log_checkpoints = off
-#log_connections = off
-#log_disconnections = off
-#log_duration = off
-#log_hostname = off
-log_line_prefix = '%t '
-
-
-
-#------------------------------------------------------------------------------
-# CLIENT CONNECTION DEFAULTS
-#------------------------------------------------------------------------------
-
-
-# - Locale and Formatting -
-
-datestyle = 'iso, mdy'
-
-# These settings are initialized by initdb, but they can be changed.
-lc_messages = 'en_US.UTF-8'             # locale for system error message
-                                        # strings
-lc_monetary = 'en_US.UTF-8'             # locale for monetary formatting
-lc_numeric = 'en_US.UTF-8'              # locale for number formatting
-lc_time = 'en_US.UTF-8'         # locale for time formatting
-
-# default configuration for text search
-default_text_search_config = 'pg_catalog.english'
-
-# - Other Defaults -
-
-#explain_pretty_print = on
-#dynamic_library_path = '$libdir'
-#local_preload_libraries = ''

data/chef/travis-cookbooks/ci_environment/postgresql/templates/default/ramfs.init.erb

@@ -1,50 +0,0 @@
-#!/bin/sh
-set -e
-
-### BEGIN INIT INFO
-# Provides:		postgresql
-# Required-Start:	$local_fs $remote_fs $network $time
-# Required-Stop:	$local_fs $remote_fs $network $time
-# Should-Start:		$syslog
-# Should-Stop:		$syslog
-# Default-Start:	2 3 4 5
-# Default-Stop:		0 1 6
-# Short-Description:	PostgreSQL RDBMS server
-### END INIT INFO
-
-# Setting environment variables for the postmaster here does not work; please
-# set them in /etc/postgresql/<version>/<cluster>/environment instead.
-
-[ -r /usr/share/postgresql-common/init.d-functions ] || exit 0
-
-. /usr/share/postgresql-common/init.d-functions
-
-# versions can be specified explicitly
-if [ -n "$2" ]; then
-    versions="$2 $3 $4 $5 $6 $7 $8 $9"
-else
-    get_versions
-fi
-
-if [ ! -d <%= node.ramfs.dir %>/postgresql ]; then
-    cp -rp /var/lib/postgresql/<%= node.postgresql.version %>/main <%= node.ramfs.dir %>/postgresql
-fi
-
-case "$1" in
-    start|stop|restart|reload|status)
-	for v in $versions; do
-	    $1 $v
-	done
-        ;;
-    force-reload)
-	for v in $versions; do
-	    reload $v
-	done
-        ;;
-    *)
-        echo "Usage: $0 {start|stop|restart|reload|force-reload|status} [version ..]"
-        exit 1
-        ;;
-esac
-
-exit 0

data/chef/travis-cookbooks/ci_environment/postgresql/templates/default/redhat.pg_hba.conf.erb

@@ -1,74 +0,0 @@
-# PostgreSQL Client Authentication Configuration File
-# ===================================================
-#
-# Refer to the "Client Authentication" section in the
-# PostgreSQL documentation for a complete description
-# of this file.  A short synopsis follows.
-#
-# This file controls: which hosts are allowed to connect, how clients
-# are authenticated, which PostgreSQL user names they can use, which
-# databases they can access.  Records take one of these forms:
-#
-# local      DATABASE  USER  METHOD  [OPTIONS]
-# host       DATABASE  USER  CIDR-ADDRESS  METHOD  [OPTIONS]
-# hostssl    DATABASE  USER  CIDR-ADDRESS  METHOD  [OPTIONS]
-# hostnossl  DATABASE  USER  CIDR-ADDRESS  METHOD  [OPTIONS]
-#
-# (The uppercase items must be replaced by actual values.)
-#
-# The first field is the connection type: "local" is a Unix-domain socket,
-# "host" is either a plain or SSL-encrypted TCP/IP socket, "hostssl" is an
-# SSL-encrypted TCP/IP socket, and "hostnossl" is a plain TCP/IP socket.
-#
-# DATABASE can be "all", "sameuser", "samerole", a database name, or
-# a comma-separated list thereof.
-#
-# USER can be "all", a user name, a group name prefixed with "+", or
-# a comma-separated list thereof.  In both the DATABASE and USER fields
-# you can also write a file name prefixed with "@" to include names from
-# a separate file.
-#
-# CIDR-ADDRESS specifies the set of hosts the record matches.
-# It is made up of an IP address and a CIDR mask that is an integer
-# (between 0 and 32 (IPv4) or 128 (IPv6) inclusive) that specifies
-# the number of significant bits in the mask.  Alternatively, you can write
-# an IP address and netmask in separate columns to specify the set of hosts.
-#
-# METHOD can be "trust", "reject", "md5", "password", "gss", "sspi", "krb5",
-# "ident", "pam", "ldap" or "cert".  Note that "password" sends passwords
-# in clear text; "md5" is preferred since it sends encrypted passwords.
-#
-# OPTIONS are a set of options for the authentication in the format
-# NAME=VALUE. The available options depend on the different authentication
-# methods - refer to the "Client Authentication" section in the documentation
-# for a list of which options are available for which authentication methods.
-#
-# Database and user names containing spaces, commas, quotes and other special
-# characters must be quoted. Quoting one of the keywords "all", "sameuser" or
-# "samerole" makes the name lose its special character, and just match a
-# database or username with that name.
-#
-# This file is read on server startup and when the postmaster receives
-# a SIGHUP signal.  If you edit the file on a running system, you have
-# to SIGHUP the postmaster for the changes to take effect.  You can use
-# "pg_ctl reload" to do that.
-
-# Put your actual configuration here
-# ----------------------------------
-#
-# If you want to allow non-local connections, you need to add more
-# "host" records. In that case you will also need to make PostgreSQL listen
-# on a non-local interface via the listen_addresses configuration parameter,
-# or via the -i or -h command line switches.
-#
-
-
-
-# TYPE  DATABASE    USER        CIDR-ADDRESS          METHOD
-
-# "local" is for Unix domain socket connections only
-local   all         all                               ident
-# IPv4 local connections:
-host    all         all         127.0.0.1/32          ident
-# IPv6 local connections:
-host    all         all         ::1/128               ident

data/chef/travis-cookbooks/ci_environment/postgresql/templates/default/redhat.postgresql.conf.erb

@@ -1,502 +0,0 @@
-# -----------------------------
-# PostgreSQL configuration file
-# -----------------------------
-#
-# This file consists of lines of the form:
-#
-#   name = value
-#
-# (The "=" is optional.)  Whitespace may be used.  Comments are introduced with
-# "#" anywhere on a line.  The complete list of parameter names and allowed
-# values can be found in the PostgreSQL documentation.
-#
-# The commented-out settings shown in this file represent the default values.
-# Re-commenting a setting is NOT sufficient to revert it to the default value;
-# you need to reload the server.
-#
-# This file is read on server startup and when the server receives a SIGHUP
-# signal.  If you edit the file on a running system, you have to SIGHUP the
-# server for the changes to take effect, or use "pg_ctl reload".  Some
-# parameters, which are marked below, require a server shutdown and restart to
-# take effect.
-#
-# Any parameter can also be given as a command-line option to the server, e.g.,
-# "postgres -c log_connections=on".  Some parameters can be changed at run time
-# with the "SET" SQL command.
-#
-# Memory units:  kB = kilobytes        Time units:  ms  = milliseconds
-#                MB = megabytes                     s   = seconds
-#                GB = gigabytes                     min = minutes
-#                                                   h   = hours
-#                                                   d   = days
-
-
-#------------------------------------------------------------------------------
-# FILE LOCATIONS
-#------------------------------------------------------------------------------
-
-# The default values of these variables are driven from the -D command-line
-# option or PGDATA environment variable, represented here as ConfigDir.
-
-#data_directory = 'ConfigDir'           # use data in another directory
-                                        # (change requires restart)
-#hba_file = 'ConfigDir/pg_hba.conf'     # host-based authentication file
-                                        # (change requires restart)
-#ident_file = 'ConfigDir/pg_ident.conf' # ident configuration file
-                                        # (change requires restart)
-
-# If external_pid_file is not explicitly set, no extra PID file is written.
-#external_pid_file = '(none)'           # write an extra PID file
-                                        # (change requires restart)
-
-
-#------------------------------------------------------------------------------
-# CONNECTIONS AND AUTHENTICATION
-#------------------------------------------------------------------------------
-
-# - Connection Settings -
-
-#listen_addresses = 'localhost'         # what IP address(es) to listen on;
-                                        # comma-separated list of addresses;
-                                        # defaults to 'localhost', '*' = all
-                                        # (change requires restart)
-#port = 5432                            # (change requires restart)
-max_connections = 100                   # (change requires restart)
-# Note:  Increasing max_connections costs ~400 bytes of shared memory per
-# connection slot, plus lock space (see max_locks_per_transaction).
-#superuser_reserved_connections = 3     # (change requires restart)
-#unix_socket_directory = ''             # (change requires restart)
-#unix_socket_group = ''                 # (change requires restart)
-#unix_socket_permissions = 0777         # begin with 0 to use octal notation
-                                        # (change requires restart)
-#bonjour_name = ''                      # defaults to the computer name
-                                        # (change requires restart)
-
-# - Security and Authentication -
-
-#authentication_timeout = 1min          # 1s-600s
-#ssl = off                              # (change requires restart)
-#ssl_ciphers = 'ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH'      # allowed SSL ciphers
-                                        # (change requires restart)
-#ssl_renegotiation_limit = 512MB        # amount of data between renegotiations
-#password_encryption = on
-#db_user_namespace = off
-
-# Kerberos and GSSAPI
-#krb_server_keyfile = ''
-#krb_srvname = 'postgres'               # (Kerberos only)
-#krb_caseins_users = off
-
-# - TCP Keepalives -
-# see "man 7 tcp" for details
-
-#tcp_keepalives_idle = 0                # TCP_KEEPIDLE, in seconds;
-                                        # 0 selects the system default
-#tcp_keepalives_interval = 0            # TCP_KEEPINTVL, in seconds;
-                                        # 0 selects the system default
-#tcp_keepalives_count = 0               # TCP_KEEPCNT;
-                                        # 0 selects the system default
-
-
-#------------------------------------------------------------------------------
-# RESOURCE USAGE (except WAL)
-#------------------------------------------------------------------------------
-
-# - Memory -
-
-shared_buffers = 32MB                   # min 128kB
-                                        # (change requires restart)
-#temp_buffers = 8MB                     # min 800kB
-#max_prepared_transactions = 0          # zero disables the feature
-                                        # (change requires restart)
-# Note:  Increasing max_prepared_transactions costs ~600 bytes of shared memory
-# per transaction slot, plus lock space (see max_locks_per_transaction).
-# It is not advisable to set max_prepared_transactions nonzero unless you
-# actively intend to use prepared transactions.
-#work_mem = 1MB                         # min 64kB
-#maintenance_work_mem = 16MB            # min 1MB
-#max_stack_depth = 2MB                  # min 100kB
-
-# - Kernel Resource Usage -
-
-#max_files_per_process = 1000           # min 25
-                                        # (change requires restart)
-#shared_preload_libraries = ''          # (change requires restart)
-
-# - Cost-Based Vacuum Delay -
-
-#vacuum_cost_delay = 0ms                # 0-100 milliseconds
-#vacuum_cost_page_hit = 1               # 0-10000 credits
-#vacuum_cost_page_miss = 10             # 0-10000 credits
-#vacuum_cost_page_dirty = 20            # 0-10000 credits
-#vacuum_cost_limit = 200                # 1-10000 credits
-
-# - Background Writer -
-
-#bgwriter_delay = 200ms                 # 10-10000ms between rounds
-#bgwriter_lru_maxpages = 100            # 0-1000 max buffers written/round
-#bgwriter_lru_multiplier = 2.0          # 0-10.0 multipler on buffers scanned/round
-
-# - Asynchronous Behavior -
-
-#effective_io_concurrency = 1           # 1-1000. 0 disables prefetching
-
-
-#------------------------------------------------------------------------------
-# WRITE AHEAD LOG
-#------------------------------------------------------------------------------
-
-# - Settings -
-
-#fsync = on                             # turns forced synchronization on or off
-#synchronous_commit = on                # immediate fsync at commit
-#wal_sync_method = fsync                # the default is the first option
-                                        # supported by the operating system:
-                                        #   open_datasync
-                                        #   fdatasync
-                                        #   fsync
-                                        #   fsync_writethrough
-                                        #   open_sync
-#full_page_writes = on                  # recover from partial page writes
-#wal_buffers = 64kB                     # min 32kB
-                                        # (change requires restart)
-#wal_writer_delay = 200ms               # 1-10000 milliseconds
-
-#commit_delay = 0                       # range 0-100000, in microseconds
-#commit_siblings = 5                    # range 1-1000
-
-# - Checkpoints -
-
-#checkpoint_segments = 3                # in logfile segments, min 1, 16MB each
-#checkpoint_timeout = 5min              # range 30s-1h
-#checkpoint_completion_target = 0.5     # checkpoint target duration, 0.0 - 1.0
-#checkpoint_warning = 30s               # 0 disables
-
-# - Archiving -
-
-#archive_mode = off             # allows archiving to be done
-                                # (change requires restart)
-#archive_command = ''           # command to use to archive a logfile segment
-#archive_timeout = 0            # force a logfile segment switch after this
-                                # number of seconds; 0 disables
-
-
-#------------------------------------------------------------------------------
-# QUERY TUNING
-#------------------------------------------------------------------------------
-
-# - Planner Method Configuration -
-
-#enable_bitmapscan = on
-#enable_hashagg = on
-#enable_hashjoin = on
-#enable_indexscan = on
-#enable_mergejoin = on
-#enable_nestloop = on
-#enable_seqscan = on
-#enable_sort = on
-#enable_tidscan = on
-
-# - Planner Cost Constants -
-
-#seq_page_cost = 1.0                    # measured on an arbitrary scale
-#random_page_cost = 4.0                 # same scale as above
-#cpu_tuple_cost = 0.01                  # same scale as above
-#cpu_index_tuple_cost = 0.005           # same scale as above
-#cpu_operator_cost = 0.0025             # same scale as above
-#effective_cache_size = 128MB
-
-# - Genetic Query Optimizer -
-
-#geqo = on
-#geqo_threshold = 12
-#geqo_effort = 5                        # range 1-10
-#geqo_pool_size = 0                     # selects default based on effort
-#geqo_generations = 0                   # selects default based on effort
-#geqo_selection_bias = 2.0              # range 1.5-2.0
-
-# - Other Planner Options -
-
-#default_statistics_target = 100        # range 1-10000
-#constraint_exclusion = partition       # on, off, or partition
-#cursor_tuple_fraction = 0.1            # range 0.0-1.0
-#from_collapse_limit = 8
-#join_collapse_limit = 8                # 1 disables collapsing of explicit
-                                        # JOIN clauses
-
-
-#------------------------------------------------------------------------------
-# ERROR REPORTING AND LOGGING
-#------------------------------------------------------------------------------
-
-# - Where to Log -
-
-#log_destination = 'stderr'             # Valid values are combinations of
-                                        # stderr, csvlog, syslog and eventlog,
-                                        # depending on platform.  csvlog
-                                        # requires logging_collector to be on.
-
-# This is used when logging to stderr:
-logging_collector = on                  # Enable capturing of stderr and csvlog
-                                        # into log files. Required to be on for
-                                        # csvlogs.
-                                        # (change requires restart)
-
-# These are only used if logging_collector is on:
-log_directory = 'pg_log'                # directory where log files are written,
-                                        # can be absolute or relative to PGDATA
-log_filename = 'postgresql-%a.log'      # log file name pattern,
-                                        # can include strftime() escapes
-log_truncate_on_rotation = on           # If on, an existing log file of the
-                                        # same name as the new log file will be
-                                        # truncated rather than appended to.
-                                        # But such truncation only occurs on
-                                        # time-driven rotation, not on restarts
-                                        # or size-driven rotation.  Default is
-                                        # off, meaning append to existing files
-                                        # in all cases.
-log_rotation_age = 1d                   # Automatic rotation of logfiles will
-                                        # happen after that time.  0 disables.
-log_rotation_size = 0                   # Automatic rotation of logfiles will
-                                        # happen after that much log output.
-                                        # 0 disables.
-
-# These are relevant when logging to syslog:
-#syslog_facility = 'LOCAL0'
-#syslog_ident = 'postgres'
-
-#silent_mode = off                      # Run server silently.
-                                        # DO NOT USE without syslog or
-                                        # logging_collector
-                                        # (change requires restart)
-
-
-# - When to Log -
-
-client_min_messages = <%= node.postgresql.client_min_messages %>
-                                        # values in order of decreasing detail:
-                                        #   debug5
-                                        #   debug4
-                                        #   debug3
-                                        #   debug2
-                                        #   debug1
-                                        #   log
-                                        #   notice
-                                        #   warning
-                                        #   error
-
-#log_min_messages = warning             # values in order of decreasing detail:
-                                        #   debug5
-                                        #   debug4
-                                        #   debug3
-                                        #   debug2
-                                        #   debug1
-                                        #   info
-                                        #   notice
-                                        #   warning
-                                        #   error
-                                        #   log
-                                        #   fatal
-                                        #   panic
-
-#log_error_verbosity = default          # terse, default, or verbose messages
-
-#log_min_error_statement = error        # values in order of decreasing detail:
-                                        #   debug5
-                                        #   debug4
-                                        #   debug3
-                                        #   debug2
-                                        #   debug1
-                                        #   info
-                                        #   notice
-                                        #   warning
-                                        #   error
-                                        #   log
-                                        #   fatal
-                                        #   panic (effectively off)
-
-#log_min_duration_statement = -1        # -1 is disabled, 0 logs all statements
-                                        # and their durations, > 0 logs only
-                                        # statements running at least this number
-                                        # of milliseconds
-
-
-# - What to Log -
-
-#debug_print_parse = off
-#debug_print_rewritten = off
-#debug_print_plan = off
-#debug_pretty_print = on
-#log_checkpoints = off
-#log_connections = off
-#log_disconnections = off
-#log_duration = off
-#log_hostname = off
-#log_line_prefix = ''                   # special values:
-                                        #   %u = user name
-                                        #   %d = database name
-                                        #   %r = remote host and port
-                                        #   %h = remote host
-                                        #   %p = process ID
-                                        #   %t = timestamp without milliseconds
-                                        #   %m = timestamp with milliseconds
-                                        #   %i = command tag
-                                        #   %c = session ID
-                                        #   %l = session line number
-                                        #   %s = session start timestamp
-                                        #   %v = virtual transaction ID
-                                        #   %x = transaction ID (0 if none)
-                                        #   %q = stop here in non-session
-                                        #        processes
-                                        #   %% = '%'
-                                        # e.g. '<%u%%%d> '
-#log_lock_waits = off                   # log lock waits >= deadlock_timeout
-#log_statement = 'none'                 # none, ddl, mod, all
-#log_temp_files = -1                    # log temporary files equal or larger
-                                        # than the specified size in kilobytes;
-                                        # -1 disables, 0 logs all temp files
-#log_timezone = unknown                 # actually, defaults to TZ environment
-                                        # setting
-
-
-#------------------------------------------------------------------------------
-# RUNTIME STATISTICS
-#------------------------------------------------------------------------------
-
-# - Query/Index Statistics Collector -
-
-#track_activities = on
-#track_counts = on
-#track_functions = none                 # none, pl, all
-#track_activity_query_size = 1024
-#update_process_title = on
-#stats_temp_directory = 'pg_stat_tmp'
-
-
-# - Statistics Monitoring -
-
-#log_parser_stats = off
-#log_planner_stats = off
-#log_executor_stats = off
-#log_statement_stats = off
-
-
-#------------------------------------------------------------------------------
-# AUTOVACUUM PARAMETERS
-#------------------------------------------------------------------------------
-
-#autovacuum = on                        # Enable autovacuum subprocess?  'on'
-                                        # requires track_counts to also be on.
-#log_autovacuum_min_duration = -1       # -1 disables, 0 logs all actions and
-                                        # their durations, > 0 logs only
-                                        # actions running at least this number
-                                        # of milliseconds.
-#autovacuum_max_workers = 3             # max number of autovacuum subprocesses
-#autovacuum_naptime = 1min              # time between autovacuum runs
-#autovacuum_vacuum_threshold = 50       # min number of row updates before
-                                        # vacuum
-#autovacuum_analyze_threshold = 50      # min number of row updates before
-                                        # analyze
-#autovacuum_vacuum_scale_factor = 0.2   # fraction of table size before vacuum
-#autovacuum_analyze_scale_factor = 0.1  # fraction of table size before analyze
-#autovacuum_freeze_max_age = 200000000  # maximum XID age before forced vacuum
-                                        # (change requires restart)
-#autovacuum_vacuum_cost_delay = 20ms    # default vacuum cost delay for
-                                        # autovacuum, in milliseconds;
-                                        # -1 means use vacuum_cost_delay
-#autovacuum_vacuum_cost_limit = -1      # default vacuum cost limit for
-                                        # autovacuum, -1 means use
-                                        # vacuum_cost_limit
-
-
-#------------------------------------------------------------------------------
-# CLIENT CONNECTION DEFAULTS
-#------------------------------------------------------------------------------
-
-# - Statement Behavior -
-
-#search_path = '"$user",public'         # schema names
-#default_tablespace = ''                # a tablespace name, '' uses the default
-#temp_tablespaces = ''                  # a list of tablespace names, '' uses
-                                        # only default tablespace
-#check_function_bodies = on
-#default_transaction_isolation = 'read committed'
-#default_transaction_read_only = off
-#session_replication_role = 'origin'
-#statement_timeout = 0                  # in milliseconds, 0 is disabled
-#vacuum_freeze_min_age = 50000000
-#vacuum_freeze_table_age = 150000000
-#xmlbinary = 'base64'
-#xmloption = 'content'
-
-# - Locale and Formatting -
-
-datestyle = 'iso, mdy'
-#intervalstyle = 'postgres'
-#timezone = unknown                     # actually, defaults to TZ environment
-                                        # setting
-#timezone_abbreviations = 'Default'     # Select the set of available time zone
-                                        # abbreviations.  Currently, there are
-                                        #   Default
-                                        #   Australia
-                                        #   India
-                                        # You can create your own file in
-                                        # share/timezonesets/.
-#extra_float_digits = 0                 # min -15, max 2
-#client_encoding = sql_ascii            # actually, defaults to database
-                                        # encoding
-
-# These settings are initialized by initdb, but they can be changed.
-lc_messages = 'en_US.UTF-8'                     # locale for system error message
-                                        # strings
-lc_monetary = 'en_US.UTF-8'                     # locale for monetary formatting
-lc_numeric = 'en_US.UTF-8'                      # locale for number formatting
-lc_time = 'en_US.UTF-8'                         # locale for time formatting
-
-# default configuration for text search
-default_text_search_config = 'pg_catalog.english'
-
-# - Other Defaults -
-
-#dynamic_library_path = '$libdir'
-#local_preload_libraries = ''
-
-
-#------------------------------------------------------------------------------
-# LOCK MANAGEMENT
-#------------------------------------------------------------------------------
-
-#deadlock_timeout = 1s
-#max_locks_per_transaction = 64         # min 10
-                                        # (change requires restart)
-# Note:  Each lock table slot uses ~270 bytes of shared memory, and there are
-# max_locks_per_transaction * (max_connections + max_prepared_transactions)
-# lock table slots.
-
-
-#------------------------------------------------------------------------------
-# VERSION/PLATFORM COMPATIBILITY
-#------------------------------------------------------------------------------
-
-# - Previous PostgreSQL Versions -
-
-#add_missing_from = off
-#array_nulls = on
-#backslash_quote = safe_encoding        # on, off, or safe_encoding
-#default_with_oids = off
-#escape_string_warning = on
-#regex_flavor = advanced                # advanced, extended, or basic
-#sql_inheritance = on
-#standard_conforming_strings = off
-#synchronize_seqscans = on
-
-# - Other Platforms and Clients -
-
-#transform_null_equals = off
-
-
-#------------------------------------------------------------------------------
-# CUSTOMIZED OPTIONS
-#------------------------------------------------------------------------------
-
-#custom_variable_classes = ''           # list of custom variable class names