lmdb 0.1.0

checksums.yaml

@@ -0,0 +1,7 @@
+---
+SHA1:
+  metadata.gz: 38c990ca72b4b416101d10eef8362c018283c53e
+  data.tar.gz: db4c4060224dfb0a80c300a0337a7c7b21a22f94
+SHA512:
+  metadata.gz: e9d3dc4c9dc912c869b4cd9f8075d5aceee6ff7bbaee9cf279b619307a73a9d7267ec1cd2119089527c574af44d42243d4425d344a5d096ba89930e0eb7364e8
+  data.tar.gz: 0916b92cdd120e864427a1bf7d377e8604215accd62a8cfff79739d065750027ee071c29969d376b2c4e269f29bcfb43c7e2c142cf00af90b168f5183fa2df31

data/.gitignore

@@ -0,0 +1,8 @@
+*.o
+*.so
+.#*
+*.log
+*.mdb
+Makefile
+tmp/
+Gemfile.lock

data/CHANGES

@@ -0,0 +1,3 @@
+0.1.0
+
+  * Initial release

data/CONTRIBUTORS

@@ -0,0 +1,3 @@
+Daniel Mendler <mail@daniel-mendler.de>
+Dimitrij Denissenko <dimitrij.denissenko@blacksquaremedia.com>
+Evgeniy Dolzhenko <evgeniy.dolzhenko@blacksquaremedia.com>

data/Gemfile

@@ -0,0 +1,2 @@
+source "https://rubygems.org"
+gemspec

data/README.md

@@ -0,0 +1,37 @@
+# LMDB
+
+Ruby bindings for the amazing OpenLDAP's Lightning Memory-Mapped Database (LLMDB)
+http://symas.com/mdb/
+
+### Installation
+
+Install via rubygems:
+
+```ruby
+gem install lmdb
+```
+
+### Licence (MIT)
+
+```
+Copyright (c) 2013 Daniel Mendler
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+```

data/Rakefile

@@ -0,0 +1,14 @@
+#!/usr/bin/env rake
+
+require 'bundler/setup'
+require 'rspec/core/rake_task'
+require "rake/extensiontask"
+
+# Install spec tasks
+RSpec::Core::RakeTask.new :spec
+
+# Install compile task
+Rake::ExtensionTask.new('lmdb_ext')
+
+desc 'Default: compile & run specs.'
+task default: [:compile, :spec]

data/ext/lmdb_ext/errors.h

@@ -0,0 +1,15 @@
+ERROR(SUCCESS)
+ERROR(KEYEXIST)
+ERROR(NOTFOUND)
+ERROR(PAGE_NOTFOUND)
+ERROR(CORRUPTED)
+ERROR(PANIC)
+ERROR(VERSION_MISMATCH)
+ERROR(INVALID)
+ERROR(MAP_FULL)
+ERROR(DBS_FULL)
+ERROR(READERS_FULL)
+ERROR(TLS_FULL)
+ERROR(TXN_FULL)
+ERROR(CURSOR_FULL)
+ERROR(PAGE_FULL)

data/ext/lmdb_ext/extconf.rb

@@ -0,0 +1,24 @@
+require 'mkmf'
+
+# Embed lmdb if we cannot find it
+def have_lmbd
+  find_header('lmdb.h') && have_library('lmdb', 'mdb_env_create')
+end
+
+if enable_config("bundled-lmdb", false) || !have_lmbd
+  $VPATH << "$(srcdir)/liblmdb"
+  $INCFLAGS << " -I$(srcdir)/liblmdb"
+  $srcs = Dir.glob("#{$srcdir}/{,liblmdb/}*.c").map {|n| File.basename(n) }
+
+  have_header 'limits.h'
+  have_header 'string.h'
+  have_header 'stdlib.h'
+  have_header 'errno.h'
+  have_header 'sys/types.h'
+  have_header 'assert.h'
+
+  have_header 'ruby.h'
+  find_header 'lmdb.h'
+end
+
+create_makefile('lmdb_ext')

data/ext/lmdb_ext/liblmdb/.gitignore

@@ -0,0 +1,16 @@
+mtest
+mtest[23456]
+testdb
+mdb_copy
+mdb_stat
+*.[ao]
+*.so
+*[~#]
+*.bak
+*.orig
+*.rej
+core
+core.*
+valgrind.*
+man/
+html/

data/ext/lmdb_ext/liblmdb/CHANGES

@@ -0,0 +1,41 @@
+LMDB 0.9 Change Log
+
+LMDB 0.9.8 Engineering
+	Allow mdb_env_set_mapsize() on an open environment
+	Fix mdb_dbi_flags() (ITS#7672)
+	Fix mdb_page_unspill() in nested txns
+	Fix mdb_cursor_get(CURRENT|NEXT) after a delete
+	Fix mdb_cursor_get(DUP) to always return key (ITS#7671)
+	Fix mdb_cursor_del() to always advance to next item (ITS#7670)
+	Fix mdb_cursor_set(SET_RANGE) for tree with single page (ITS#7681)
+	Fix mdb_env_copy() retry open if O_DIRECT fails (ITS#7682)
+	Tweak mdb_page_spill() to be less aggressive
+	Documentation
+		Update caveats since mdb_reader_check() added in 0.9.7
+
+LMDB 0.9.7 Release (2013/08/17)
+	Don't leave stale lockfile on failed RDONLY open (ITS#7664)
+	Fix mdb_page_split() ref beyond cursor depth
+	Fix read txn data race (ITS#7635)
+	Fix mdb_rebalance (ITS#7536, #7538)
+	Fix mdb_drop() (ITS#7561)
+	Misc DEBUG macro fixes
+	Add MDB_NOTLS envflag
+	Add mdb_env_copyfd()
+	Add mdb_txn_env() (ITS#7660)
+	Add mdb_dbi_flags() (ITS#7661)
+	Add mdb_env_get_maxkeysize()
+	Add mdb_env_reader_list()/mdb_env_reader_check()
+	Add mdb_page_spill/unspill, remove hard txn size limit
+	Use shorter names for semaphores (ITS#7615)
+	Build
+		Fix install target (ITS#7656)
+	Documentation
+		Misc updates for cursors, DB handles, data lifetime
+
+LMDB 0.9.6 Release (2013/02/25)
+	Many fixes/enhancements
+
+LMDB 0.9.5 Release (2012/11/30)
+	Renamed from libmdb to liblmdb
+	Many fixes/enhancements

data/ext/lmdb_ext/liblmdb/COPYRIGHT

@@ -0,0 +1,20 @@
+Copyright 2011-2013 Howard Chu, Symas Corp.
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted only as authorized by the OpenLDAP
+Public License.
+
+A copy of this license is available in the file LICENSE in the
+top-level directory of the distribution or, alternatively, at
+<http://www.OpenLDAP.org/license.html>.
+
+OpenLDAP is a registered trademark of the OpenLDAP Foundation.
+
+Individual files and/or contributed packages may be copyright by
+other parties and/or subject to additional restrictions.
+
+This work also contains materials derived from public sources.
+
+Additional information about OpenLDAP can be obtained at
+<http://www.openldap.org/>.

data/ext/lmdb_ext/liblmdb/LICENSE

@@ -0,0 +1,47 @@
+The OpenLDAP Public License
+  Version 2.8, 17 August 2003
+
+Redistribution and use of this software and associated documentation
+("Software"), with or without modification, are permitted provided
+that the following conditions are met:
+
+1. Redistributions in source form must retain copyright statements
+   and notices,
+
+2. Redistributions in binary form must reproduce applicable copyright
+   statements and notices, this list of conditions, and the following
+   disclaimer in the documentation and/or other materials provided
+   with the distribution, and
+
+3. Redistributions must contain a verbatim copy of this document.
+
+The OpenLDAP Foundation may revise this license from time to time.
+Each revision is distinguished by a version number.  You may use
+this Software under terms of this license revision or under the
+terms of any subsequent revision of the license.
+
+THIS SOFTWARE IS PROVIDED BY THE OPENLDAP FOUNDATION AND ITS
+CONTRIBUTORS ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES,
+INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT
+SHALL THE OPENLDAP FOUNDATION, ITS CONTRIBUTORS, OR THE AUTHOR(S)
+OR OWNER(S) OF THE SOFTWARE BE LIABLE FOR ANY DIRECT, INDIRECT,
+INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+The names of the authors and copyright holders must not be used in
+advertising or otherwise to promote the sale, use or other dealing
+in this Software without specific, written prior permission.  Title
+to copyright in this Software shall at all times remain with copyright
+holders.
+
+OpenLDAP is a registered trademark of the OpenLDAP Foundation.
+
+Copyright 1999-2003 The OpenLDAP Foundation, Redwood City,
+California, USA.  All Rights Reserved.  Permission to copy and
+distribute verbatim copies of this document is granted.

data/ext/lmdb_ext/liblmdb/lmdb.h

@@ -0,0 +1,1367 @@
+/** @file lmdb.h
+ *	@brief Lightning memory-mapped database library
+ *
+ *	@mainpage	Lightning Memory-Mapped Database Manager (MDB)
+ *
+ *	@section intro_sec Introduction
+ *	MDB is a Btree-based database management library modeled loosely on the
+ *	BerkeleyDB API, but much simplified. The entire database is exposed
+ *	in a memory map, and all data fetches return data directly
+ *	from the mapped memory, so no malloc's or memcpy's occur during
+ *	data fetches. As such, the library is extremely simple because it
+ *	requires no page caching layer of its own, and it is extremely high
+ *	performance and memory-efficient. It is also fully transactional with
+ *	full ACID semantics, and when the memory map is read-only, the
+ *	database integrity cannot be corrupted by stray pointer writes from
+ *	application code.
+ *
+ *	The library is fully thread-aware and supports concurrent read/write
+ *	access from multiple processes and threads. Data pages use a copy-on-
+ *	write strategy so no active data pages are ever overwritten, which
+ *	also provides resistance to corruption and eliminates the need of any
+ *	special recovery procedures after a system crash. Writes are fully
+ *	serialized; only one write transaction may be active at a time, which
+ *	guarantees that writers can never deadlock. The database structure is
+ *	multi-versioned so readers run with no locks; writers cannot block
+ *	readers, and readers don't block writers.
+ *
+ *	Unlike other well-known database mechanisms which use either write-ahead
+ *	transaction logs or append-only data writes, MDB requires no maintenance
+ *	during operation. Both write-ahead loggers and append-only databases
+ *	require periodic checkpointing and/or compaction of their log or database
+ *	files otherwise they grow without bound. MDB tracks free pages within
+ *	the database and re-uses them for new write operations, so the database
+ *	size does not grow without bound in normal use.
+ *
+ *	The memory map can be used as a read-only or read-write map. It is
+ *	read-only by default as this provides total immunity to corruption.
+ *	Using read-write mode offers much higher write performance, but adds
+ *	the possibility for stray application writes thru pointers to silently
+ *	corrupt the database. Of course if your application code is known to
+ *	be bug-free (...) then this is not an issue.
+ *
+ *	@section caveats_sec Caveats
+ *	Troubleshooting the lock file, plus semaphores on BSD systems:
+ *
+ *	- A broken lockfile can cause sync issues.
+ *	  Stale reader transactions left behind by an aborted program
+ *	  cause further writes to grow the database quickly, and
+ *	  stale locks can block further operation.
+ *
+ *	  Fix: Check for stale readers periodically, using the
+ *	  #mdb_reader_check function or the mdb_stat tool. Or just
+ *	  make all programs using the database close it; the lockfile
+ *	  is always reset on first open of the environment.
+ *
+ *	- On BSD systems or others configured with MDB_USE_POSIX_SEM,
+ *	  startup can fail due to semaphores owned by another userid.
+ *
+ *	  Fix: Open and close the database as the user which owns the
+ *	  semaphores (likely last user) or as root, while no other
+ *	  process is using the database.
+ *
+ *	Restrictions/caveats (in addition to those listed for some functions):
+ *
+ *	- Only the database owner should normally use the database on
+ *	  BSD systems or when otherwise configured with MDB_USE_POSIX_SEM.
+ *	  Multiple users can cause startup to fail later, as noted above.
+ *
+ *	- A thread can only use one transaction at a time, plus any child
+ *	  transactions.  Each transaction belongs to one thread.  See below.
+ *	  The #MDB_NOTLS flag changes this for read-only transactions.
+ *
+ *	- Use an MDB_env* in the process which opened it, without fork()ing.
+ *
+ *	- Do not have open an MDB database twice in the same process at
+ *	  the same time.  Not even from a plain open() call - close()ing it
+ *	  breaks flock() advisory locking.
+ *
+ *	- Avoid long-lived transactions.  Read transactions prevent
+ *	  reuse of pages freed by newer write transactions, thus the
+ *	  database can grow quickly.  Write transactions prevent
+ *	  other write transactions, since writes are serialized.
+ *
+ *	- Avoid suspending a process with active transactions.  These
+ *	  would then be "long-lived" as above.  Also read transactions
+ *	  suspended when writers commit could sometimes see wrong data.
+ *
+ *	...when several processes can use a database concurrently:
+ *
+ *	- Avoid aborting a process with an active transaction.
+ *	  The transaction becomes "long-lived" as above until a check
+ *	  for stale readers is performed or the lockfile is reset,
+ *	  since the process may not remove it from the lockfile.
+ *
+ *	- If you do that anyway, do a periodic check for stale readers. Or
+ *	  close the environment once in a while, so the lockfile can get reset.
+ *
+ *	- Do not use MDB databases on remote filesystems, even between
+ *	  processes on the same host.  This breaks flock() on some OSes,
+ *	  possibly memory map sync, and certainly sync between programs
+ *	  on different hosts.
+ *
+ *	- Opening a database can fail if another process is opening or
+ *	  closing it at exactly the same time.
+ *
+ *	@author	Howard Chu, Symas Corporation.
+ *
+ *	@copyright Copyright 2011-2013 Howard Chu, Symas Corp. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted only as authorized by the OpenLDAP
+ * Public License.
+ *
+ * A copy of this license is available in the file LICENSE in the
+ * top-level directory of the distribution or, alternatively, at
+ * <http://www.OpenLDAP.org/license.html>.
+ *
+ *	@par Derived From:
+ * This code is derived from btree.c written by Martin Hedenfalk.
+ *
+ * Copyright (c) 2009, 2010 Martin Hedenfalk <martin@bzero.se>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifndef _LMDB_H_
+#define _LMDB_H_
+
+#include <sys/types.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Unix permissions for creating files, or dummy definition for Windows */
+#ifdef _MSC_VER
+typedef	int	mdb_mode_t;
+#else
+typedef	mode_t	mdb_mode_t;
+#endif
+
+/** An abstraction for a file handle.
+ *	On POSIX systems file handles are small integers. On Windows
+ *	they're opaque pointers.
+ */
+#ifdef _WIN32
+typedef	void *mdb_filehandle_t;
+#else
+typedef int mdb_filehandle_t;
+#endif
+
+/** @defgroup mdb MDB API
+ *	@{
+ *	@brief OpenLDAP Lightning Memory-Mapped Database Manager
+ */
+/** @defgroup Version Version Macros
+ *	@{
+ */
+/** Library major version */
+#define MDB_VERSION_MAJOR	0
+/** Library minor version */
+#define MDB_VERSION_MINOR	9
+/** Library patch version */
+#define MDB_VERSION_PATCH	8
+
+/** Combine args a,b,c into a single integer for easy version comparisons */
+#define MDB_VERINT(a,b,c)	(((a) << 24) | ((b) << 16) | (c))
+
+/** The full library version as a single integer */
+#define MDB_VERSION_FULL	\
+	MDB_VERINT(MDB_VERSION_MAJOR,MDB_VERSION_MINOR,MDB_VERSION_PATCH)
+
+/** The release date of this library version */
+#define MDB_VERSION_DATE	"August 29, 2013"
+
+/** A stringifier for the version info */
+#define MDB_VERSTR(a,b,c,d)	"MDB " #a "." #b "." #c ": (" d ")"
+
+/** A helper for the stringifier macro */
+#define MDB_VERFOO(a,b,c,d)	MDB_VERSTR(a,b,c,d)
+
+/** The full library version as a C string */
+#define	MDB_VERSION_STRING	\
+	MDB_VERFOO(MDB_VERSION_MAJOR,MDB_VERSION_MINOR,MDB_VERSION_PATCH,MDB_VERSION_DATE)
+/**	@} */
+
+/** @brief Opaque structure for a database environment.
+ *
+ * A DB environment supports multiple databases, all residing in the same
+ * shared-memory map.
+ */
+typedef struct MDB_env MDB_env;
+
+/** @brief Opaque structure for a transaction handle.
+ *
+ * All database operations require a transaction handle. Transactions may be
+ * read-only or read-write.
+ */
+typedef struct MDB_txn MDB_txn;
+
+/** @brief A handle for an individual database in the DB environment. */
+typedef unsigned int	MDB_dbi;
+
+/** @brief Opaque structure for navigating through a database */
+typedef struct MDB_cursor MDB_cursor;
+
+/** @brief Generic structure used for passing keys and data in and out
+ * of the database.
+ *
+ * Key sizes must be between 1 and the liblmdb build-time constant
+ * #MDB_MAXKEYSIZE inclusive. This currently defaults to 511. The
+ * same applies to data sizes in databases with the #MDB_DUPSORT flag.
+ * Other data items can in theory be from 0 to 0xffffffff bytes long.
+ *
+ * Values returned from the database are valid only until a subsequent
+ * update operation, or the end of the transaction.
+ */
+typedef struct MDB_val {
+	size_t		 mv_size;	/**< size of the data item */
+	void		*mv_data;	/**< address of the data item */
+} MDB_val;
+
+/** @brief A callback function used to compare two keys in a database */
+typedef int  (MDB_cmp_func)(const MDB_val *a, const MDB_val *b);
+
+/** @brief A callback function used to relocate a position-dependent data item
+ * in a fixed-address database.
+ *
+ * The \b newptr gives the item's desired address in
+ * the memory map, and \b oldptr gives its previous address. The item's actual
+ * data resides at the address in \b item.  This callback is expected to walk
+ * through the fields of the record in \b item and modify any
+ * values based at the \b oldptr address to be relative to the \b newptr address.
+ * @param[in,out] item The item that is to be relocated.
+ * @param[in] oldptr The previous address.
+ * @param[in] newptr The new address to relocate to.
+ * @param[in] relctx An application-provided context, set by #mdb_set_relctx().
+ * @todo This feature is currently unimplemented.
+ */
+typedef void (MDB_rel_func)(MDB_val *item, void *oldptr, void *newptr, void *relctx);
+
+/** @defgroup	mdb_env	Environment Flags
+ *
+ *	Values do not overlap Database Flags.
+ *	@{
+ */
+	/** mmap at a fixed address (experimental) */
+#define MDB_FIXEDMAP	0x01
+	/** no environment directory */
+#define MDB_NOSUBDIR	0x4000
+	/** don't fsync after commit */
+#define MDB_NOSYNC		0x10000
+	/** read only */
+#define MDB_RDONLY		0x20000
+	/** don't fsync metapage after commit */
+#define MDB_NOMETASYNC		0x40000
+	/** use writable mmap */
+#define MDB_WRITEMAP		0x80000
+	/** use asynchronous msync when MDB_WRITEMAP is used */
+#define MDB_MAPASYNC		0x100000
+	/** tie reader locktable slots to #MDB_txn objects instead of to threads */
+#define MDB_NOTLS		0x200000
+/** @} */
+
+/**	@defgroup	mdb_dbi_open	Database Flags
+ *
+ *	Values do not overlap Environment Flags.
+ *	@{
+ */
+	/** use reverse string keys */
+#define MDB_REVERSEKEY	0x02
+	/** use sorted duplicates */
+#define MDB_DUPSORT		0x04
+	/** numeric keys in native byte order.
+	 *  The keys must all be of the same size. */
+#define MDB_INTEGERKEY	0x08
+	/** with #MDB_DUPSORT, sorted dup items have fixed size */
+#define MDB_DUPFIXED	0x10
+	/** with #MDB_DUPSORT, dups are numeric in native byte order */
+#define MDB_INTEGERDUP	0x20
+	/** with #MDB_DUPSORT, use reverse string dups */
+#define MDB_REVERSEDUP	0x40
+	/** create DB if not already existing */
+#define MDB_CREATE		0x40000
+/** @} */
+
+/**	@defgroup mdb_put	Write Flags
+ *	@{
+ */
+/** For put: Don't write if the key already exists. */
+#define MDB_NOOVERWRITE	0x10
+/** Only for #MDB_DUPSORT<br>
+ * For put: don't write if the key and data pair already exist.<br>
+ * For mdb_cursor_del: remove all duplicate data items.
+ */
+#define MDB_NODUPDATA	0x20
+/** For mdb_cursor_put: overwrite the current key/data pair */
+#define MDB_CURRENT	0x40
+/** For put: Just reserve space for data, don't copy it. Return a
+ * pointer to the reserved space.
+ */
+#define MDB_RESERVE	0x10000
+/** Data is being appended, don't split full pages. */
+#define MDB_APPEND	0x20000
+/** Duplicate data is being appended, don't split full pages. */
+#define MDB_APPENDDUP	0x40000
+/** Store multiple data items in one call. Only for #MDB_DUPFIXED. */
+#define MDB_MULTIPLE	0x80000
+/*	@} */
+
+/** @brief Cursor Get operations.
+ *
+ *	This is the set of all operations for retrieving data
+ *	using a cursor.
+ */
+typedef enum MDB_cursor_op {
+	MDB_FIRST,				/**< Position at first key/data item */
+	MDB_FIRST_DUP,			/**< Position at first data item of current key.
+								Only for #MDB_DUPSORT */
+	MDB_GET_BOTH,			/**< Position at key/data pair. Only for #MDB_DUPSORT */
+	MDB_GET_BOTH_RANGE,		/**< position at key, nearest data. Only for #MDB_DUPSORT */
+	MDB_GET_CURRENT,		/**< Return key/data at current cursor position */
+	MDB_GET_MULTIPLE,		/**< Return all the duplicate data items at the current
+								 cursor position. Only for #MDB_DUPFIXED */
+	MDB_LAST,				/**< Position at last key/data item */
+	MDB_LAST_DUP,			/**< Position at last data item of current key.
+								Only for #MDB_DUPSORT */
+	MDB_NEXT,				/**< Position at next data item */
+	MDB_NEXT_DUP,			/**< Position at next data item of current key.
+								Only for #MDB_DUPSORT */
+	MDB_NEXT_MULTIPLE,		/**< Return all duplicate data items at the next
+								cursor position. Only for #MDB_DUPFIXED */
+	MDB_NEXT_NODUP,			/**< Position at first data item of next key */
+	MDB_PREV,				/**< Position at previous data item */
+	MDB_PREV_DUP,			/**< Position at previous data item of current key.
+								Only for #MDB_DUPSORT */
+	MDB_PREV_NODUP,			/**< Position at last data item of previous key */
+	MDB_SET,				/**< Position at specified key */
+	MDB_SET_KEY,			/**< Position at specified key, return key + data */
+	MDB_SET_RANGE			/**< Position at first key greater than or equal to specified key. */
+} MDB_cursor_op;
+
+/** @defgroup  errors	Return Codes
+ *
+ *	BerkeleyDB uses -30800 to -30999, we'll go under them
+ *	@{
+ */
+	/**	Successful result */
+#define MDB_SUCCESS	 0
+	/** key/data pair already exists */
+#define MDB_KEYEXIST	(-30799)
+	/** key/data pair not found (EOF) */
+#define MDB_NOTFOUND	(-30798)
+	/** Requested page not found - this usually indicates corruption */
+#define MDB_PAGE_NOTFOUND	(-30797)
+	/** Located page was wrong type */
+#define MDB_CORRUPTED	(-30796)
+	/** Update of meta page failed, probably I/O error */
+#define MDB_PANIC		(-30795)
+	/** Environment version mismatch */
+#define MDB_VERSION_MISMATCH	(-30794)
+	/** File is not a valid MDB file */
+#define MDB_INVALID	(-30793)
+	/** Environment mapsize reached */
+#define MDB_MAP_FULL	(-30792)
+	/** Environment maxdbs reached */
+#define MDB_DBS_FULL	(-30791)
+	/** Environment maxreaders reached */
+#define MDB_READERS_FULL	(-30790)
+	/** Too many TLS keys in use - Windows only */
+#define MDB_TLS_FULL	(-30789)
+	/** Txn has too many dirty pages */
+#define MDB_TXN_FULL	(-30788)
+	/** Cursor stack too deep - internal error */
+#define MDB_CURSOR_FULL	(-30787)
+	/** Page has not enough space - internal error */
+#define MDB_PAGE_FULL	(-30786)
+	/** Database contents grew beyond environment mapsize */
+#define MDB_MAP_RESIZED	(-30785)
+	/** MDB_INCOMPATIBLE: Operation and DB incompatible, or DB flags changed */
+#define MDB_INCOMPATIBLE	(-30784)
+	/** Invalid reuse of reader locktable slot */
+#define MDB_BAD_RSLOT		(-30783)
+	/** Transaction cannot recover - it must be aborted */
+#define MDB_BAD_TXN			(-30782)
+	/** Too big key/data, key is empty, or wrong DUPFIXED size */
+#define MDB_BAD_VALSIZE		(-30781)
+#define MDB_LAST_ERRCODE	MDB_BAD_VALSIZE
+/** @} */
+
+/** @brief Statistics for a database in the environment */
+typedef struct MDB_stat {
+	unsigned int	ms_psize;			/**< Size of a database page.
+											This is currently the same for all databases. */
+	unsigned int	ms_depth;			/**< Depth (height) of the B-tree */
+	size_t		ms_branch_pages;	/**< Number of internal (non-leaf) pages */
+	size_t		ms_leaf_pages;		/**< Number of leaf pages */
+	size_t		ms_overflow_pages;	/**< Number of overflow pages */
+	size_t		ms_entries;			/**< Number of data items */
+} MDB_stat;
+
+/** @brief Information about the environment */
+typedef struct MDB_envinfo {
+	void	*me_mapaddr;			/**< Address of map, if fixed */
+	size_t	me_mapsize;				/**< Size of the data memory map */
+	size_t	me_last_pgno;			/**< ID of the last used page */
+	size_t	me_last_txnid;			/**< ID of the last committed transaction */
+	unsigned int me_maxreaders;		/**< max reader slots in the environment */
+	unsigned int me_numreaders;		/**< max reader slots used in the environment */
+} MDB_envinfo;
+
+	/** @brief Return the mdb library version information.
+	 *
+	 * @param[out] major if non-NULL, the library major version number is copied here
+	 * @param[out] minor if non-NULL, the library minor version number is copied here
+	 * @param[out] patch if non-NULL, the library patch version number is copied here
+	 * @retval "version string" The library version as a string
+	 */
+char *mdb_version(int *major, int *minor, int *patch);
+
+	/** @brief Return a string describing a given error code.
+	 *
+	 * This function is a superset of the ANSI C X3.159-1989 (ANSI C) strerror(3)
+	 * function. If the error code is greater than or equal to 0, then the string
+	 * returned by the system function strerror(3) is returned. If the error code
+	 * is less than 0, an error string corresponding to the MDB library error is
+	 * returned. See @ref errors for a list of MDB-specific error codes.
+	 * @param[in] err The error code
+	 * @retval "error message" The description of the error
+	 */
+char *mdb_strerror(int err);
+
+	/** @brief Create an MDB environment handle.
+	 *
+	 * This function allocates memory for a #MDB_env structure. To release
+	 * the allocated memory and discard the handle, call #mdb_env_close().
+	 * Before the handle may be used, it must be opened using #mdb_env_open().
+	 * Various other options may also need to be set before opening the handle,
+	 * e.g. #mdb_env_set_mapsize(), #mdb_env_set_maxreaders(), #mdb_env_set_maxdbs(),
+	 * depending on usage requirements.
+	 * @param[out] env The address where the new handle will be stored
+	 * @return A non-zero error value on failure and 0 on success.
+	 */
+int  mdb_env_create(MDB_env **env);
+
+	/** @brief Open an environment handle.
+	 *
+	 * If this function fails, #mdb_env_close() must be called to discard the #MDB_env handle.
+	 * @param[in] env An environment handle returned by #mdb_env_create()
+	 * @param[in] path The directory in which the database files reside. This
+	 * directory must already exist and be writable.
+	 * @param[in] flags Special options for this environment. This parameter
+	 * must be set to 0 or by bitwise OR'ing together one or more of the
+	 * values described here.
+	 * Flags set by mdb_env_set_flags() are also used.
+	 * <ul>
+	 *	<li>#MDB_FIXEDMAP
+	 *      use a fixed address for the mmap region. This flag must be specified
+	 *      when creating the environment, and is stored persistently in the environment.
+	 *		If successful, the memory map will always reside at the same virtual address
+	 *		and pointers used to reference data items in the database will be constant
+	 *		across multiple invocations. This option may not always work, depending on
+	 *		how the operating system has allocated memory to shared libraries and other uses.
+	 *		The feature is highly experimental.
+	 *	<li>#MDB_NOSUBDIR
+	 *		By default, MDB creates its environment in a directory whose
+	 *		pathname is given in \b path, and creates its data and lock files
+	 *		under that directory. With this option, \b path is used as-is for
+	 *		the database main data file. The database lock file is the \b path
+	 *		with "-lock" appended.
+	 *	<li>#MDB_RDONLY
+	 *		Open the environment in read-only mode. No write operations will be
+	 *		allowed. MDB will still modify the lock file - except on read-only
+	 *		filesystems, where MDB does not use locks.
+	 *	<li>#MDB_WRITEMAP
+	 *		Use a writeable memory map unless MDB_RDONLY is set. This is faster
+	 *		and uses fewer mallocs, but loses protection from application bugs
+	 *		like wild pointer writes and other bad updates into the database.
+	 *		Incompatible with nested transactions.
+	 *	<li>#MDB_NOMETASYNC
+	 *		Flush system buffers to disk only once per transaction, omit the
+	 *		metadata flush. Defer that until the system flushes files to disk,
+	 *		or next non-MDB_RDONLY commit or #mdb_env_sync(). This optimization
+	 *		maintains database integrity, but a system crash may undo the last
+	 *		committed transaction. I.e. it preserves the ACI (atomicity,
+	 *		consistency, isolation) but not D (durability) database property.
+	 *		This flag may be changed at any time using #mdb_env_set_flags().
+	 *	<li>#MDB_NOSYNC
+	 *		Don't flush system buffers to disk when committing a transaction.
+	 *		This optimization means a system crash can corrupt the database or
+	 *		lose the last transactions if buffers are not yet flushed to disk.
+	 *		The risk is governed by how often the system flushes dirty buffers
+	 *		to disk and how often #mdb_env_sync() is called.  However, if the
+	 *		filesystem preserves write order and the #MDB_WRITEMAP flag is not
+	 *		used, transactions exhibit ACI (atomicity, consistency, isolation)
+	 *		properties and only lose D (durability).  I.e. database integrity
+	 *		is maintained, but a system crash may undo the final transactions.
+	 *		Note that (#MDB_NOSYNC | #MDB_WRITEMAP) leaves the system with no
+	 *		hint for when to write transactions to disk, unless #mdb_env_sync()
+	 *		is called. (#MDB_MAPASYNC | #MDB_WRITEMAP) may be preferable.
+	 *		This flag may be changed at any time using #mdb_env_set_flags().
+	 *	<li>#MDB_MAPASYNC
+	 *		When using #MDB_WRITEMAP, use asynchronous flushes to disk.
+	 *		As with #MDB_NOSYNC, a system crash can then corrupt the
+	 *		database or lose the last transactions. Calling #mdb_env_sync()
+	 *		ensures on-disk database integrity until next commit.
+	 *		This flag may be changed at any time using #mdb_env_set_flags().
+	 *	<li>#MDB_NOTLS
+	 *		Don't use Thread-Local Storage. Tie reader locktable slots to
+	 *		#MDB_txn objects instead of to threads. I.e. #mdb_txn_reset() keeps
+	 *		the slot reseved for the #MDB_txn object. A thread may use parallel
+	 *		read-only transactions. A read-only transaction may span threads if
+	 *		the user synchronizes its use. Applications that multiplex many
+	 *		user threads over individual OS threads need this option. Such an
+	 *		application must also serialize the write transactions in an OS
+	 *		thread, since MDB's write locking is unaware of the user threads.
+	 * </ul>
+	 * @param[in] mode The UNIX permissions to set on created files. This parameter
+	 * is ignored on Windows.
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>#MDB_VERSION_MISMATCH - the version of the MDB library doesn't match the
+	 *	version that created the database environment.
+	 *	<li>#MDB_INVALID - the environment file headers are corrupted.
+	 *	<li>ENOENT - the directory specified by the path parameter doesn't exist.
+	 *	<li>EACCES - the user didn't have permission to access the environment files.
+	 *	<li>EAGAIN - the environment was locked by another process.
+	 * </ul>
+	 */
+int  mdb_env_open(MDB_env *env, const char *path, unsigned int flags, mdb_mode_t mode);
+
+	/** @brief Copy an MDB environment to the specified path.
+	 *
+	 * This function may be used to make a backup of an existing environment.
+	 * No lockfile is created, since it gets recreated at need.
+	 * @note This call can trigger significant file size growth if run in
+	 * parallel with write transactions, because it employs a read-only
+	 * transaction. See long-lived transactions under @ref caveats_sec.
+	 * @param[in] env An environment handle returned by #mdb_env_create(). It
+	 * must have already been opened successfully.
+	 * @param[in] path The directory in which the copy will reside. This
+	 * directory must already exist and be writable but must otherwise be
+	 * empty.
+	 * @return A non-zero error value on failure and 0 on success.
+	 */
+int  mdb_env_copy(MDB_env *env, const char *path);
+
+	/** @brief Copy an MDB environment to the specified file descriptor.
+	 *
+	 * This function may be used to make a backup of an existing environment.
+	 * No lockfile is created, since it gets recreated at need.
+	 * @note This call can trigger significant file size growth if run in
+	 * parallel with write transactions, because it employs a read-only
+	 * transaction. See long-lived transactions under @ref caveats_sec.
+	 * @param[in] env An environment handle returned by #mdb_env_create(). It
+	 * must have already been opened successfully.
+	 * @param[in] fd The filedescriptor to write the copy to. It must
+	 * have already been opened for Write access.
+	 * @return A non-zero error value on failure and 0 on success.
+	 */
+int  mdb_env_copyfd(MDB_env *env, mdb_filehandle_t fd);
+
+	/** @brief Return statistics about the MDB environment.
+	 *
+	 * @param[in] env An environment handle returned by #mdb_env_create()
+	 * @param[out] stat The address of an #MDB_stat structure
+	 * 	where the statistics will be copied
+	 */
+int  mdb_env_stat(MDB_env *env, MDB_stat *stat);
+
+	/** @brief Return information about the MDB environment.
+	 *
+	 * @param[in] env An environment handle returned by #mdb_env_create()
+	 * @param[out] stat The address of an #MDB_envinfo structure
+	 * 	where the information will be copied
+	 */
+int  mdb_env_info(MDB_env *env, MDB_envinfo *stat);
+
+	/** @brief Flush the data buffers to disk.
+	 *
+	 * Data is always written to disk when #mdb_txn_commit() is called,
+	 * but the operating system may keep it buffered. MDB always flushes
+	 * the OS buffers upon commit as well, unless the environment was
+	 * opened with #MDB_NOSYNC or in part #MDB_NOMETASYNC.
+	 * @param[in] env An environment handle returned by #mdb_env_create()
+	 * @param[in] force If non-zero, force a synchronous flush.  Otherwise
+	 *  if the environment has the #MDB_NOSYNC flag set the flushes
+	 *	will be omitted, and with #MDB_MAPASYNC they will be asynchronous.
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>EINVAL - an invalid parameter was specified.
+	 *	<li>EIO - an error occurred during synchronization.
+	 * </ul>
+	 */
+int  mdb_env_sync(MDB_env *env, int force);
+
+	/** @brief Close the environment and release the memory map.
+	 *
+	 * Only a single thread may call this function. All transactions, databases,
+	 * and cursors must already be closed before calling this function. Attempts to
+	 * use any such handles after calling this function will cause a SIGSEGV.
+	 * The environment handle will be freed and must not be used again after this call.
+	 * @param[in] env An environment handle returned by #mdb_env_create()
+	 */
+void mdb_env_close(MDB_env *env);
+
+	/** @brief Set environment flags.
+	 *
+	 * This may be used to set some flags in addition to those from
+	 * #mdb_env_open(), or to unset these flags.
+	 * @param[in] env An environment handle returned by #mdb_env_create()
+	 * @param[in] flags The flags to change, bitwise OR'ed together
+	 * @param[in] onoff A non-zero value sets the flags, zero clears them.
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>EINVAL - an invalid parameter was specified.
+	 * </ul>
+	 */
+int  mdb_env_set_flags(MDB_env *env, unsigned int flags, int onoff);
+
+	/** @brief Get environment flags.
+	 *
+	 * @param[in] env An environment handle returned by #mdb_env_create()
+	 * @param[out] flags The address of an integer to store the flags
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>EINVAL - an invalid parameter was specified.
+	 * </ul>
+	 */
+int  mdb_env_get_flags(MDB_env *env, unsigned int *flags);
+
+	/** @brief Return the path that was used in #mdb_env_open().
+	 *
+	 * @param[in] env An environment handle returned by #mdb_env_create()
+	 * @param[out] path Address of a string pointer to contain the path. This
+	 * is the actual string in the environment, not a copy. It should not be
+	 * altered in any way.
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>EINVAL - an invalid parameter was specified.
+	 * </ul>
+	 */
+int  mdb_env_get_path(MDB_env *env, const char **path);
+
+	/** @brief Set the size of the memory map to use for this environment.
+	 *
+	 * The size should be a multiple of the OS page size. The default is
+	 * 10485760 bytes. The size of the memory map is also the maximum size
+	 * of the database. The value should be chosen as large as possible,
+	 * to accommodate future growth of the database.
+	 * This function should be called after #mdb_env_create() and before #mdb_env_open().
+	 * It may be called at later times if no transactions are active in
+	 * this process. Note that the library does not check for this condition,
+	 * the caller must ensure it explicitly.
+	 *
+	 * If the mapsize is changed by another process, #mdb_txn_begin() will
+	 * return #MDB_MAP_RESIZED. This function may be called with a size
+	 * of zero to adopt the new size.
+	 *
+	 * Any attempt to set a size smaller than the space already consumed
+	 * by the environment will be silently changed to the current size of the used space.
+	 * @param[in] env An environment handle returned by #mdb_env_create()
+	 * @param[in] size The size in bytes
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>EINVAL - an invalid parameter was specified, or the environment has
+	 *   	an active write transaction.
+	 * </ul>
+	 */
+int  mdb_env_set_mapsize(MDB_env *env, size_t size);
+
+	/** @brief Set the maximum number of threads/reader slots for the environment.
+	 *
+	 * This defines the number of slots in the lock table that is used to track readers in the
+	 * the environment. The default is 126.
+	 * Starting a read-only transaction normally ties a lock table slot to the
+	 * current thread until the environment closes or the thread exits. If
+	 * MDB_NOTLS is in use, #mdb_txn_begin() instead ties the slot to the
+	 * MDB_txn object until it or the #MDB_env object is destroyed.
+	 * This function may only be called after #mdb_env_create() and before #mdb_env_open().
+	 * @param[in] env An environment handle returned by #mdb_env_create()
+	 * @param[in] readers The maximum number of reader lock table slots
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>EINVAL - an invalid parameter was specified, or the environment is already open.
+	 * </ul>
+	 */
+int  mdb_env_set_maxreaders(MDB_env *env, unsigned int readers);
+
+	/** @brief Get the maximum number of threads/reader slots for the environment.
+	 *
+	 * @param[in] env An environment handle returned by #mdb_env_create()
+	 * @param[out] readers Address of an integer to store the number of readers
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>EINVAL - an invalid parameter was specified.
+	 * </ul>
+	 */
+int  mdb_env_get_maxreaders(MDB_env *env, unsigned int *readers);
+
+	/** @brief Set the maximum number of named databases for the environment.
+	 *
+	 * This function is only needed if multiple databases will be used in the
+	 * environment. Simpler applications that use the environment as a single
+	 * unnamed database can ignore this option.
+	 * This function may only be called after #mdb_env_create() and before #mdb_env_open().
+	 * @param[in] env An environment handle returned by #mdb_env_create()
+	 * @param[in] dbs The maximum number of databases
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>EINVAL - an invalid parameter was specified, or the environment is already open.
+	 * </ul>
+	 */
+int  mdb_env_set_maxdbs(MDB_env *env, MDB_dbi dbs);
+
+	/** @brief Get the maximum size of a key for the environment.
+	 *
+	 * @param[in] env An environment handle returned by #mdb_env_create()
+	 * @return The maximum size of a key. (#MDB_MAXKEYSIZE)
+	 */
+int  mdb_env_get_maxkeysize(MDB_env *env);
+
+	/** @brief Create a transaction for use with the environment.
+	 *
+	 * The transaction handle may be discarded using #mdb_txn_abort() or #mdb_txn_commit().
+	 * @note A transaction and its cursors must only be used by a single
+	 * thread, and a thread may only have a single transaction at a time.
+	 * If #MDB_NOTLS is in use, this does not apply to read-only transactions.
+	 * @note Cursors may not span transactions.
+	 * @param[in] env An environment handle returned by #mdb_env_create()
+	 * @param[in] parent If this parameter is non-NULL, the new transaction
+	 * will be a nested transaction, with the transaction indicated by \b parent
+	 * as its parent. Transactions may be nested to any level. A parent
+	 * transaction and its cursors may not issue any other operations than
+	 * mdb_txn_commit and mdb_txn_abort while it has active child transactions.
+	 * @param[in] flags Special options for this transaction. This parameter
+	 * must be set to 0 or by bitwise OR'ing together one or more of the
+	 * values described here.
+	 * <ul>
+	 *	<li>#MDB_RDONLY
+	 *		This transaction will not perform any write operations.
+	 * </ul>
+	 * @param[out] txn Address where the new #MDB_txn handle will be stored
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>#MDB_PANIC - a fatal error occurred earlier and the environment
+	 *		must be shut down.
+	 *	<li>#MDB_MAP_RESIZED - another process wrote data beyond this MDB_env's
+	 *		mapsize and this environment's map must be resized as well.
+	 *		See #mdb_env_set_mapsize().
+	 *	<li>#MDB_READERS_FULL - a read-only transaction was requested and
+	 *		the reader lock table is full. See #mdb_env_set_maxreaders().
+	 *	<li>ENOMEM - out of memory.
+	 * </ul>
+	 */
+int  mdb_txn_begin(MDB_env *env, MDB_txn *parent, unsigned int flags, MDB_txn **txn);
+
+	/** @brief Returns the transaction's #MDB_env
+	 *
+	 * @param[in] txn A transaction handle returned by #mdb_txn_begin()
+	 */
+MDB_env *mdb_txn_env(MDB_txn *txn);
+
+	/** @brief Commit all the operations of a transaction into the database.
+	 *
+	 * The transaction handle is freed. It and its cursors must not be used
+	 * again after this call, except with #mdb_cursor_renew().
+	 * @note Earlier documentation incorrectly said all cursors would be freed.
+	 * Only write-transactions free cursors.
+	 * @param[in] txn A transaction handle returned by #mdb_txn_begin()
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>EINVAL - an invalid parameter was specified.
+	 *	<li>ENOSPC - no more disk space.
+	 *	<li>EIO - a low-level I/O error occurred while writing.
+	 *	<li>ENOMEM - out of memory.
+	 * </ul>
+	 */
+int  mdb_txn_commit(MDB_txn *txn);
+
+	/** @brief Abandon all the operations of the transaction instead of saving them.
+	 *
+	 * The transaction handle is freed. It and its cursors must not be used
+	 * again after this call, except with #mdb_cursor_renew().
+	 * @note Earlier documentation incorrectly said all cursors would be freed.
+	 * Only write-transactions free cursors.
+	 * @param[in] txn A transaction handle returned by #mdb_txn_begin()
+	 */
+void mdb_txn_abort(MDB_txn *txn);
+
+	/** @brief Reset a read-only transaction.
+	 *
+	 * Abort the transaction like #mdb_txn_abort(), but keep the transaction
+	 * handle. #mdb_txn_renew() may reuse the handle. This saves allocation
+	 * overhead if the process will start a new read-only transaction soon,
+	 * and also locking overhead if #MDB_NOTLS is in use. The reader table
+	 * lock is released, but the table slot stays tied to its thread or
+	 * #MDB_txn. Use mdb_txn_abort() to discard a reset handle, and to free
+	 * its lock table slot if MDB_NOTLS is in use.
+	 * Cursors opened within the transaction must not be used
+	 * again after this call, except with #mdb_cursor_renew().
+	 * Reader locks generally don't interfere with writers, but they keep old
+	 * versions of database pages allocated. Thus they prevent the old pages
+	 * from being reused when writers commit new data, and so under heavy load
+	 * the database size may grow much more rapidly than otherwise.
+	 * @param[in] txn A transaction handle returned by #mdb_txn_begin()
+	 */
+void mdb_txn_reset(MDB_txn *txn);
+
+	/** @brief Renew a read-only transaction.
+	 *
+	 * This acquires a new reader lock for a transaction handle that had been
+	 * released by #mdb_txn_reset(). It must be called before a reset transaction
+	 * may be used again.
+	 * @param[in] txn A transaction handle returned by #mdb_txn_begin()
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>#MDB_PANIC - a fatal error occurred earlier and the environment
+	 *		must be shut down.
+	 *	<li>EINVAL - an invalid parameter was specified.
+	 * </ul>
+	 */
+int  mdb_txn_renew(MDB_txn *txn);
+
+/** Compat with version <= 0.9.4, avoid clash with libmdb from MDB Tools project */
+#define mdb_open(txn,name,flags,dbi)	mdb_dbi_open(txn,name,flags,dbi)
+/** Compat with version <= 0.9.4, avoid clash with libmdb from MDB Tools project */
+#define mdb_close(env,dbi)				mdb_dbi_close(env,dbi)
+
+	/** @brief Open a database in the environment.
+	 *
+	 * A database handle denotes the name and parameters of a database,
+	 * independently of whether such a database exists.
+	 * The database handle may be discarded by calling #mdb_dbi_close().
+	 * The old database handle is returned if the database was already open.
+	 * The handle must only be closed once.
+	 * The database handle will be private to the current transaction until
+	 * the transaction is successfully committed. If the transaction is
+	 * aborted the handle will be closed automatically.
+	 * After a successful commit the
+	 * handle will reside in the shared environment, and may be used
+	 * by other transactions. This function must not be called from
+	 * multiple concurrent transactions. A transaction that uses this function
+	 * must finish (either commit or abort) before any other transaction may
+	 * use this function.
+	 *
+	 * To use named databases (with name != NULL), #mdb_env_set_maxdbs()
+	 * must be called before opening the environment.
+	 * @param[in] txn A transaction handle returned by #mdb_txn_begin()
+	 * @param[in] name The name of the database to open. If only a single
+	 * 	database is needed in the environment, this value may be NULL.
+	 * @param[in] flags Special options for this database. This parameter
+	 * must be set to 0 or by bitwise OR'ing together one or more of the
+	 * values described here.
+	 * <ul>
+	 *	<li>#MDB_REVERSEKEY
+	 *		Keys are strings to be compared in reverse order, from the end
+	 *		of the strings to the beginning. By default, Keys are treated as strings and
+	 *		compared from beginning to end.
+	 *	<li>#MDB_DUPSORT
+	 *		Duplicate keys may be used in the database. (Or, from another perspective,
+	 *		keys may have multiple data items, stored in sorted order.) By default
+	 *		keys must be unique and may have only a single data item.
+	 *	<li>#MDB_INTEGERKEY
+	 *		Keys are binary integers in native byte order. Setting this option
+	 *		requires all keys to be the same size, typically sizeof(int)
+	 *		or sizeof(size_t).
+	 *	<li>#MDB_DUPFIXED
+	 *		This flag may only be used in combination with #MDB_DUPSORT. This option
+	 *		tells the library that the data items for this database are all the same
+	 *		size, which allows further optimizations in storage and retrieval. When
+	 *		all data items are the same size, the #MDB_GET_MULTIPLE and #MDB_NEXT_MULTIPLE
+	 *		cursor operations may be used to retrieve multiple items at once.
+	 *	<li>#MDB_INTEGERDUP
+	 *		This option specifies that duplicate data items are also integers, and
+	 *		should be sorted as such.
+	 *	<li>#MDB_REVERSEDUP
+	 *		This option specifies that duplicate data items should be compared as
+	 *		strings in reverse order.
+	 *	<li>#MDB_CREATE
+	 *		Create the named database if it doesn't exist. This option is not
+	 *		allowed in a read-only transaction or a read-only environment.
+	 * </ul>
+	 * @param[out] dbi Address where the new #MDB_dbi handle will be stored
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>#MDB_NOTFOUND - the specified database doesn't exist in the environment
+	 *		and #MDB_CREATE was not specified.
+	 *	<li>#MDB_DBS_FULL - too many databases have been opened. See #mdb_env_set_maxdbs().
+	 * </ul>
+	 */
+int  mdb_dbi_open(MDB_txn *txn, const char *name, unsigned int flags, MDB_dbi *dbi);
+
+	/** @brief Retrieve statistics for a database.
+	 *
+	 * @param[in] txn A transaction handle returned by #mdb_txn_begin()
+	 * @param[in] dbi A database handle returned by #mdb_dbi_open()
+	 * @param[out] stat The address of an #MDB_stat structure
+	 * 	where the statistics will be copied
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>EINVAL - an invalid parameter was specified.
+	 * </ul>
+	 */
+int  mdb_stat(MDB_txn *txn, MDB_dbi dbi, MDB_stat *stat);
+
+	/** @brief Retrieve the DB flags for a database handle.
+	 *
+	 * @param[in] txn A transaction handle returned by #mdb_txn_begin()
+	 * @param[in] dbi A database handle returned by #mdb_dbi_open()
+	 * @param[out] flags Address where the flags will be returned.
+	 * @return A non-zero error value on failure and 0 on success.
+	 */
+int mdb_dbi_flags(MDB_txn *txn, MDB_dbi dbi, unsigned int *flags);
+
+	/** @brief Close a database handle.
+	 *
+	 * This call is not mutex protected. Handles should only be closed by
+	 * a single thread, and only if no other threads are going to reference
+	 * the database handle or one of its cursors any further. Do not close
+	 * a handle if an existing transaction has modified its database.
+	 * @param[in] env An environment handle returned by #mdb_env_create()
+	 * @param[in] dbi A database handle returned by #mdb_dbi_open()
+	 */
+void mdb_dbi_close(MDB_env *env, MDB_dbi dbi);
+
+	/** @brief Empty or delete+close a database.
+	 *
+	 * @param[in] txn A transaction handle returned by #mdb_txn_begin()
+	 * @param[in] dbi A database handle returned by #mdb_dbi_open()
+	 * @param[in] del 0 to empty the DB, 1 to delete it from the
+	 * environment and close the DB handle.
+	 * @return A non-zero error value on failure and 0 on success.
+	 */
+int  mdb_drop(MDB_txn *txn, MDB_dbi dbi, int del);
+
+	/** @brief Set a custom key comparison function for a database.
+	 *
+	 * The comparison function is called whenever it is necessary to compare a
+	 * key specified by the application with a key currently stored in the database.
+	 * If no comparison function is specified, and no special key flags were specified
+	 * with #mdb_dbi_open(), the keys are compared lexically, with shorter keys collating
+	 * before longer keys.
+	 * @warning This function must be called before any data access functions are used,
+	 * otherwise data corruption may occur. The same comparison function must be used by every
+	 * program accessing the database, every time the database is used.
+	 * @param[in] txn A transaction handle returned by #mdb_txn_begin()
+	 * @param[in] dbi A database handle returned by #mdb_dbi_open()
+	 * @param[in] cmp A #MDB_cmp_func function
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>EINVAL - an invalid parameter was specified.
+	 * </ul>
+	 */
+int  mdb_set_compare(MDB_txn *txn, MDB_dbi dbi, MDB_cmp_func *cmp);
+
+	/** @brief Set a custom data comparison function for a #MDB_DUPSORT database.
+	 *
+	 * This comparison function is called whenever it is necessary to compare a data
+	 * item specified by the application with a data item currently stored in the database.
+	 * This function only takes effect if the database was opened with the #MDB_DUPSORT
+	 * flag.
+	 * If no comparison function is specified, and no special key flags were specified
+	 * with #mdb_dbi_open(), the data items are compared lexically, with shorter items collating
+	 * before longer items.
+	 * @warning This function must be called before any data access functions are used,
+	 * otherwise data corruption may occur. The same comparison function must be used by every
+	 * program accessing the database, every time the database is used.
+	 * @param[in] txn A transaction handle returned by #mdb_txn_begin()
+	 * @param[in] dbi A database handle returned by #mdb_dbi_open()
+	 * @param[in] cmp A #MDB_cmp_func function
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>EINVAL - an invalid parameter was specified.
+	 * </ul>
+	 */
+int  mdb_set_dupsort(MDB_txn *txn, MDB_dbi dbi, MDB_cmp_func *cmp);
+
+	/** @brief Set a relocation function for a #MDB_FIXEDMAP database.
+	 *
+	 * @todo The relocation function is called whenever it is necessary to move the data
+	 * of an item to a different position in the database (e.g. through tree
+	 * balancing operations, shifts as a result of adds or deletes, etc.). It is
+	 * intended to allow address/position-dependent data items to be stored in
+	 * a database in an environment opened with the #MDB_FIXEDMAP option.
+	 * Currently the relocation feature is unimplemented and setting
+	 * this function has no effect.
+	 * @param[in] txn A transaction handle returned by #mdb_txn_begin()
+	 * @param[in] dbi A database handle returned by #mdb_dbi_open()
+	 * @param[in] rel A #MDB_rel_func function
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>EINVAL - an invalid parameter was specified.
+	 * </ul>
+	 */
+int  mdb_set_relfunc(MDB_txn *txn, MDB_dbi dbi, MDB_rel_func *rel);
+
+	/** @brief Set a context pointer for a #MDB_FIXEDMAP database's relocation function.
+	 *
+	 * See #mdb_set_relfunc and #MDB_rel_func for more details.
+	 * @param[in] txn A transaction handle returned by #mdb_txn_begin()
+	 * @param[in] dbi A database handle returned by #mdb_dbi_open()
+	 * @param[in] ctx An arbitrary pointer for whatever the application needs.
+	 * It will be passed to the callback function set by #mdb_set_relfunc
+	 * as its \b relctx parameter whenever the callback is invoked.
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>EINVAL - an invalid parameter was specified.
+	 * </ul>
+	 */
+int  mdb_set_relctx(MDB_txn *txn, MDB_dbi dbi, void *ctx);
+
+	/** @brief Get items from a database.
+	 *
+	 * This function retrieves key/data pairs from the database. The address
+	 * and length of the data associated with the specified \b key are returned
+	 * in the structure to which \b data refers.
+	 * If the database supports duplicate keys (#MDB_DUPSORT) then the
+	 * first data item for the key will be returned. Retrieval of other
+	 * items requires the use of #mdb_cursor_get().
+	 *
+	 * @note The memory pointed to by the returned values is owned by the
+	 * database. The caller need not dispose of the memory, and may not
+	 * modify it in any way. For values returned in a read-only transaction
+	 * any modification attempts will cause a SIGSEGV.
+	 * @note Values returned from the database are valid only until a
+	 * subsequent update operation, or the end of the transaction.
+	 * @param[in] txn A transaction handle returned by #mdb_txn_begin()
+	 * @param[in] dbi A database handle returned by #mdb_dbi_open()
+	 * @param[in] key The key to search for in the database
+	 * @param[out] data The data corresponding to the key
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>#MDB_NOTFOUND - the key was not in the database.
+	 *	<li>EINVAL - an invalid parameter was specified.
+	 * </ul>
+	 */
+int  mdb_get(MDB_txn *txn, MDB_dbi dbi, MDB_val *key, MDB_val *data);
+
+	/** @brief Store items into a database.
+	 *
+	 * This function stores key/data pairs in the database. The default behavior
+	 * is to enter the new key/data pair, replacing any previously existing key
+	 * if duplicates are disallowed, or adding a duplicate data item if
+	 * duplicates are allowed (#MDB_DUPSORT).
+	 * @param[in] txn A transaction handle returned by #mdb_txn_begin()
+	 * @param[in] dbi A database handle returned by #mdb_dbi_open()
+	 * @param[in] key The key to store in the database
+	 * @param[in,out] data The data to store
+	 * @param[in] flags Special options for this operation. This parameter
+	 * must be set to 0 or by bitwise OR'ing together one or more of the
+	 * values described here.
+	 * <ul>
+	 *	<li>#MDB_NODUPDATA - enter the new key/data pair only if it does not
+	 *		already appear in the database. This flag may only be specified
+	 *		if the database was opened with #MDB_DUPSORT. The function will
+	 *		return #MDB_KEYEXIST if the key/data pair already appears in the
+	 *		database.
+	 *	<li>#MDB_NOOVERWRITE - enter the new key/data pair only if the key
+	 *		does not already appear in the database. The function will return
+	 *		#MDB_KEYEXIST if the key already appears in the database, even if
+	 *		the database supports duplicates (#MDB_DUPSORT). The \b data
+	 *		parameter will be set to point to the existing item.
+	 *	<li>#MDB_RESERVE - reserve space for data of the given size, but
+	 *		don't copy the given data. Instead, return a pointer to the
+	 *		reserved space, which the caller can fill in later - before
+	 *		the next update operation or the transaction ends. This saves
+	 *		an extra memcpy if the data is being generated later.
+	 *	<li>#MDB_APPEND - append the given key/data pair to the end of the
+	 *		database. No key comparisons are performed. This option allows
+	 *		fast bulk loading when keys are already known to be in the
+	 *		correct order. Loading unsorted keys with this flag will cause
+	 *		data corruption.
+	 *	<li>#MDB_APPENDDUP - as above, but for sorted dup data.
+	 * </ul>
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>#MDB_MAP_FULL - the database is full, see #mdb_env_set_mapsize().
+	 *	<li>#MDB_TXN_FULL - the transaction has too many dirty pages.
+	 *	<li>EACCES - an attempt was made to write in a read-only transaction.
+	 *	<li>EINVAL - an invalid parameter was specified.
+	 * </ul>
+	 */
+int  mdb_put(MDB_txn *txn, MDB_dbi dbi, MDB_val *key, MDB_val *data,
+			    unsigned int flags);
+
+	/** @brief Delete items from a database.
+	 *
+	 * This function removes key/data pairs from the database.
+	 * If the database does not support sorted duplicate data items
+	 * (#MDB_DUPSORT) the data parameter is ignored.
+	 * If the database supports sorted duplicates and the data parameter
+	 * is NULL, all of the duplicate data items for the key will be
+	 * deleted. Otherwise, if the data parameter is non-NULL
+	 * only the matching data item will be deleted.
+	 * This function will return #MDB_NOTFOUND if the specified key/data
+	 * pair is not in the database.
+	 * @param[in] txn A transaction handle returned by #mdb_txn_begin()
+	 * @param[in] dbi A database handle returned by #mdb_dbi_open()
+	 * @param[in] key The key to delete from the database
+	 * @param[in] data The data to delete
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>EACCES - an attempt was made to write in a read-only transaction.
+	 *	<li>EINVAL - an invalid parameter was specified.
+	 * </ul>
+	 */
+int  mdb_del(MDB_txn *txn, MDB_dbi dbi, MDB_val *key, MDB_val *data);
+
+	/** @brief Create a cursor handle.
+	 *
+	 * A cursor is associated with a specific transaction and database.
+	 * A cursor cannot be used when its database handle is closed.  Nor
+	 * when its transaction has ended, except with #mdb_cursor_renew().
+	 * It can be discarded with #mdb_cursor_close().
+	 * A cursor in a write-transaction can be closed before its transaction
+	 * ends, and will otherwise be closed when its transaction ends.
+	 * A cursor in a read-only transaction must be closed explicitly, before
+	 * or after its transaction ends. It can be reused with
+	 * #mdb_cursor_renew() before finally closing it.
+	 * @note Earlier documentation said that cursors in every transaction
+	 * were closed when the transaction committed or aborted.
+	 * @param[in] txn A transaction handle returned by #mdb_txn_begin()
+	 * @param[in] dbi A database handle returned by #mdb_dbi_open()
+	 * @param[out] cursor Address where the new #MDB_cursor handle will be stored
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>EINVAL - an invalid parameter was specified.
+	 * </ul>
+	 */
+int  mdb_cursor_open(MDB_txn *txn, MDB_dbi dbi, MDB_cursor **cursor);
+
+	/** @brief Close a cursor handle.
+	 *
+	 * The cursor handle will be freed and must not be used again after this call.
+	 * Its transaction must still be live if it is a write-transaction.
+	 * @param[in] cursor A cursor handle returned by #mdb_cursor_open()
+	 */
+void mdb_cursor_close(MDB_cursor *cursor);
+
+	/** @brief Renew a cursor handle.
+	 *
+	 * A cursor is associated with a specific transaction and database.
+	 * Cursors that are only used in read-only
+	 * transactions may be re-used, to avoid unnecessary malloc/free overhead.
+	 * The cursor may be associated with a new read-only transaction, and
+	 * referencing the same database handle as it was created with.
+	 * This may be done whether the previous transaction is live or dead.
+	 * @param[in] txn A transaction handle returned by #mdb_txn_begin()
+	 * @param[in] cursor A cursor handle returned by #mdb_cursor_open()
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>EINVAL - an invalid parameter was specified.
+	 * </ul>
+	 */
+int  mdb_cursor_renew(MDB_txn *txn, MDB_cursor *cursor);
+
+	/** @brief Return the cursor's transaction handle.
+	 *
+	 * @param[in] cursor A cursor handle returned by #mdb_cursor_open()
+	 */
+MDB_txn *mdb_cursor_txn(MDB_cursor *cursor);
+
+	/** @brief Return the cursor's database handle.
+	 *
+	 * @param[in] cursor A cursor handle returned by #mdb_cursor_open()
+	 */
+MDB_dbi mdb_cursor_dbi(MDB_cursor *cursor);
+
+	/** @brief Retrieve by cursor.
+	 *
+	 * This function retrieves key/data pairs from the database. The address and length
+	 * of the key are returned in the object to which \b key refers (except for the
+	 * case of the #MDB_SET option, in which the \b key object is unchanged), and
+	 * the address and length of the data are returned in the object to which \b data
+	 * refers.
+	 * See #mdb_get() for restrictions on using the output values.
+	 * @param[in] cursor A cursor handle returned by #mdb_cursor_open()
+	 * @param[in,out] key The key for a retrieved item
+	 * @param[in,out] data The data of a retrieved item
+	 * @param[in] op A cursor operation #MDB_cursor_op
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>#MDB_NOTFOUND - no matching key found.
+	 *	<li>EINVAL - an invalid parameter was specified.
+	 * </ul>
+	 */
+int  mdb_cursor_get(MDB_cursor *cursor, MDB_val *key, MDB_val *data,
+			    MDB_cursor_op op);
+
+	/** @brief Store by cursor.
+	 *
+	 * This function stores key/data pairs into the database.
+	 * If the function fails for any reason, the state of the cursor will be
+	 * unchanged. If the function succeeds and an item is inserted into the
+	 * database, the cursor is always positioned to refer to the newly inserted item.
+	 * @param[in] cursor A cursor handle returned by #mdb_cursor_open()
+	 * @param[in] key The key operated on.
+	 * @param[in] data The data operated on.
+	 * @param[in] flags Options for this operation. This parameter
+	 * must be set to 0 or one of the values described here.
+	 * <ul>
+	 *	<li>#MDB_CURRENT - overwrite the data of the key/data pair to which
+	 *		the cursor refers with the specified data item. The \b key
+	 *		parameter is ignored.
+	 *	<li>#MDB_NODUPDATA - enter the new key/data pair only if it does not
+	 *		already appear in the database. This flag may only be specified
+	 *		if the database was opened with #MDB_DUPSORT. The function will
+	 *		return #MDB_KEYEXIST if the key/data pair already appears in the
+	 *		database.
+	 *	<li>#MDB_NOOVERWRITE - enter the new key/data pair only if the key
+	 *		does not already appear in the database. The function will return
+	 *		#MDB_KEYEXIST if the key already appears in the database, even if
+	 *		the database supports duplicates (#MDB_DUPSORT).
+	 *	<li>#MDB_RESERVE - reserve space for data of the given size, but
+	 *		don't copy the given data. Instead, return a pointer to the
+	 *		reserved space, which the caller can fill in later. This saves
+	 *		an extra memcpy if the data is being generated later.
+	 *	<li>#MDB_APPEND - append the given key/data pair to the end of the
+	 *		database. No key comparisons are performed. This option allows
+	 *		fast bulk loading when keys are already known to be in the
+	 *		correct order. Loading unsorted keys with this flag will cause
+	 *		data corruption.
+	 *	<li>#MDB_APPENDDUP - as above, but for sorted dup data.
+	 *	<li>#MDB_MULTIPLE - store multiple contiguous data elements in a
+	 *		single request. This flag may only be specified if the database
+	 *		was opened with #MDB_DUPFIXED. The \b data argument must be an
+	 *		array of two MDB_vals. The mv_size of the first MDB_val must be
+	 *		the size of a single data element. The mv_data of the first MDB_val
+	 *		must point to the beginning of the array of contiguous data elements.
+	 *		The mv_size of the second MDB_val must be the count of the number
+	 *		of data elements to store. On return this field will be set to
+	 *		the count of the number of elements actually written. The mv_data
+	 *		of the second MDB_val is unused.
+	 * </ul>
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>#MDB_MAP_FULL - the database is full, see #mdb_env_set_mapsize().
+	 *	<li>#MDB_TXN_FULL - the transaction has too many dirty pages.
+	 *	<li>EACCES - an attempt was made to modify a read-only database.
+	 *	<li>EINVAL - an invalid parameter was specified.
+	 * </ul>
+	 */
+int  mdb_cursor_put(MDB_cursor *cursor, MDB_val *key, MDB_val *data,
+				unsigned int flags);
+
+	/** @brief Delete current key/data pair
+	 *
+	 * This function deletes the key/data pair to which the cursor refers.
+	 * @param[in] cursor A cursor handle returned by #mdb_cursor_open()
+	 * @param[in] flags Options for this operation. This parameter
+	 * must be set to 0 or one of the values described here.
+	 * <ul>
+	 *	<li>#MDB_NODUPDATA - delete all of the data items for the current key.
+	 *		This flag may only be specified if the database was opened with #MDB_DUPSORT.
+	 * </ul>
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>EACCES - an attempt was made to modify a read-only database.
+	 *	<li>EINVAL - an invalid parameter was specified.
+	 * </ul>
+	 */
+int  mdb_cursor_del(MDB_cursor *cursor, unsigned int flags);
+
+	/** @brief Return count of duplicates for current key.
+	 *
+	 * This call is only valid on databases that support sorted duplicate
+	 * data items #MDB_DUPSORT.
+	 * @param[in] cursor A cursor handle returned by #mdb_cursor_open()
+	 * @param[out] countp Address where the count will be stored
+	 * @return A non-zero error value on failure and 0 on success. Some possible
+	 * errors are:
+	 * <ul>
+	 *	<li>EINVAL - cursor is not initialized, or an invalid parameter was specified.
+	 * </ul>
+	 */
+int  mdb_cursor_count(MDB_cursor *cursor, size_t *countp);
+
+	/** @brief Compare two data items according to a particular database.
+	 *
+	 * This returns a comparison as if the two data items were keys in the
+	 * specified database.
+	 * @param[in] txn A transaction handle returned by #mdb_txn_begin()
+	 * @param[in] dbi A database handle returned by #mdb_dbi_open()
+	 * @param[in] a The first item to compare
+	 * @param[in] b The second item to compare
+	 * @return < 0 if a < b, 0 if a == b, > 0 if a > b
+	 */
+int  mdb_cmp(MDB_txn *txn, MDB_dbi dbi, const MDB_val *a, const MDB_val *b);
+
+	/** @brief Compare two data items according to a particular database.
+	 *
+	 * This returns a comparison as if the two items were data items of
+	 * the specified database. The database must have the #MDB_DUPSORT flag.
+	 * @param[in] txn A transaction handle returned by #mdb_txn_begin()
+	 * @param[in] dbi A database handle returned by #mdb_dbi_open()
+	 * @param[in] a The first item to compare
+	 * @param[in] b The second item to compare
+	 * @return < 0 if a < b, 0 if a == b, > 0 if a > b
+	 */
+int  mdb_dcmp(MDB_txn *txn, MDB_dbi dbi, const MDB_val *a, const MDB_val *b);
+
+	/** @brief A callback function used to print a message from the library.
+	 *
+	 * @param[in] msg The string to be printed.
+	 * @param[in] ctx An arbitrary context pointer for the callback.
+	 * @return < 0 on failure, 0 on success.
+	 */
+typedef int (MDB_msg_func)(const char *msg, void *ctx);
+
+	/** @brief Dump the entries in the reader lock table.
+	 *
+	 * @param[in] env An environment handle returned by #mdb_env_create()
+	 * @param[in] func A #MDB_msg_func function
+	 * @param[in] ctx Anything the message function needs
+	 * @return < 0 on failure, 0 on success.
+	 */
+int	mdb_reader_list(MDB_env *env, MDB_msg_func *func, void *ctx);
+
+	/** @brief Check for stale entries in the reader lock table.
+	 *
+	 * @param[in] env An environment handle returned by #mdb_env_create()
+	 * @param[out] dead Number of stale slots that were cleared
+	 * @return 0 on success, non-zero on failure.
+	 */
+int	mdb_reader_check(MDB_env *env, int *dead);
+/**	@} */
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* _LMDB_H_ */