lithic 0.1.0.pre.alpha.6 → 0.1.0.pre.alpha.7

data/rbi/lib/lithic/resources/reports.rbi

@@ -8,8 +8,7 @@ module Lithic
 
       # @api private
       sig { params(client: Lithic::Client).returns(T.attached_class) }
-      def self.new(client:)
-      end
+      def self.new(client:); end
     end
   end
 end

data/rbi/lib/lithic/resources/responder_endpoints.rbi

@@ -18,9 +18,7 @@ module Lithic
         # The URL for the responder endpoint (must be http(s)).
         url: nil,
         request_options: {}
-      )
-      end
-
+      ); end
       # Disenroll a responder endpoint
       sig do
         params(
@@ -33,9 +31,7 @@ module Lithic
         # The type of the endpoint.
         type:,
         request_options: {}
-      )
-      end
-
+      ); end
       # Check the status of a responder endpoint
       sig do
         params(
@@ -48,13 +44,10 @@ module Lithic
         # The type of the endpoint.
         type:,
         request_options: {}
-      )
-      end
-
+      ); end
       # @api private
       sig { params(client: Lithic::Client).returns(T.attached_class) }
-      def self.new(client:)
-      end
+      def self.new(client:); end
     end
   end
 end

data/rbi/lib/lithic/resources/three_ds/authentication.rbi

@@ -16,13 +16,11 @@ module Lithic
           # 3DS Authentication Token
           three_ds_authentication_token,
           request_options: {}
-        )
-        end
-
+        ); end
         # Simulates a 3DS authentication request from the payment network as if it came
-        #   from an ACS. If you're configured for 3DS Customer Decisioning, simulating
-        #   authentications requires your customer decisioning endpoint to be set up
-        #   properly (respond with a valid JSON).
+        # from an ACS. If you're configured for 3DS Customer Decisioning, simulating
+        # authentications requires your customer decisioning endpoint to be set up
+        # properly (respond with a valid JSON).
         sig do
           params(
             merchant: T.any(Lithic::Models::ThreeDS::AuthenticationSimulateParams::Merchant, Lithic::Internal::AnyHash),
@@ -39,16 +37,14 @@ module Lithic
           pan:,
           transaction:,
           # When set will use the following values as part of the Simulated Authentication.
-          #   When not set defaults to MATCH
+          # When not set defaults to MATCH
           card_expiry_check: nil,
           request_options: {}
-        )
-        end
-
+        ); end
         # Endpoint for simulating entering OTP into 3DS Challenge UI. A call to
-        #   /v1/three_ds_authentication/simulate that resulted in triggered SMS-OTP
-        #   challenge must precede. Only a single attempt is supported; upon entering OTP,
-        #   the challenge is either approved or declined.
+        # /v1/three_ds_authentication/simulate that resulted in triggered SMS-OTP
+        # challenge must precede. Only a single attempt is supported; upon entering OTP,
+        # the challenge is either approved or declined.
         sig do
           params(
             token: String,
@@ -59,18 +55,15 @@ module Lithic
         end
         def simulate_otp_entry(
           # A unique token returned as part of a /v1/three_ds_authentication/simulate call
-          #   that resulted in PENDING_CHALLENGE authentication result.
+          # that resulted in PENDING_CHALLENGE authentication result.
           token:,
           # The OTP entered by the cardholder
           otp:,
           request_options: {}
-        )
-        end
-
+        ); end
         # @api private
         sig { params(client: Lithic::Client).returns(T.attached_class) }
-        def self.new(client:)
-        end
+        def self.new(client:); end
       end
     end
   end

data/rbi/lib/lithic/resources/three_ds/decisioning.rbi

@@ -15,43 +15,38 @@ module Lithic
         end
         def challenge_response(
           # Globally unique identifier for the 3DS authentication. This token is sent as
-          #   part of the initial 3DS Decisioning Request and as part of the 3DS Challenge
-          #   Event in the [ThreeDSAuthentication](#/components/schemas/ThreeDSAuthentication)
-          #   object
+          # part of the initial 3DS Decisioning Request and as part of the 3DS Challenge
+          # Event in the [ThreeDSAuthentication](#/components/schemas/ThreeDSAuthentication)
+          # object
           token:,
           # Whether the Cardholder has Approved or Declined the issued Challenge
           challenge_response:,
           request_options: {}
-        )
-        end
-
+        ); end
         # Retrieve the 3DS Decisioning HMAC secret key. If one does not exist for your
-        #   program yet, calling this endpoint will create one for you. The headers (which
-        #   you can use to verify 3DS Decisioning requests) will begin appearing shortly
-        #   after calling this endpoint for the first time. See
-        #   [this page](https://docs.lithic.com/docs/3ds-decisioning#3ds-decisioning-hmac-secrets)
-        #   for more detail about verifying 3DS Decisioning requests.
+        # program yet, calling this endpoint will create one for you. The headers (which
+        # you can use to verify 3DS Decisioning requests) will begin appearing shortly
+        # after calling this endpoint for the first time. See
+        # [this page](https://docs.lithic.com/docs/3ds-decisioning#3ds-decisioning-hmac-secrets)
+        # for more detail about verifying 3DS Decisioning requests.
         sig do
           params(request_options: T.nilable(T.any(Lithic::RequestOptions, Lithic::Internal::AnyHash)))
             .returns(Lithic::Models::ThreeDS::DecisioningRetrieveSecretResponse)
         end
-        def retrieve_secret(request_options: {})
-        end
+        def retrieve_secret(request_options: {}); end
 
         # Generate a new 3DS Decisioning HMAC secret key. The old secret key will be
-        #   deactivated 24 hours after a successful request to this endpoint. Make a
-        #   [`GET /three_ds_decisioning/secret`](https://docs.lithic.com/reference/getthreedsdecisioningsecret)
-        #   request to retrieve the new secret key.
+        # deactivated 24 hours after a successful request to this endpoint. Make a
+        # [`GET /three_ds_decisioning/secret`](https://docs.lithic.com/reference/getthreedsdecisioningsecret)
+        # request to retrieve the new secret key.
         sig do
           params(request_options: T.nilable(T.any(Lithic::RequestOptions, Lithic::Internal::AnyHash))).void
         end
-        def rotate_secret(request_options: {})
-        end
+        def rotate_secret(request_options: {}); end
 
         # @api private
         sig { params(client: Lithic::Client).returns(T.attached_class) }
-        def self.new(client:)
-        end
+        def self.new(client:); end
       end
     end
   end

data/rbi/lib/lithic/resources/three_ds.rbi

@@ -11,8 +11,7 @@ module Lithic
 
       # @api private
       sig { params(client: Lithic::Client).returns(T.attached_class) }
-      def self.new(client:)
-      end
+      def self.new(client:); end
     end
   end
 end

data/rbi/lib/lithic/resources/tokenization_decisioning.rbi

@@ -4,32 +4,29 @@ module Lithic
   module Resources
     class TokenizationDecisioning
       # Retrieve the Tokenization Decisioning secret key. If one does not exist your
-      #   program yet, calling this endpoint will create one for you. The headers of the
-      #   Tokenization Decisioning request will contain a hmac signature which you can use
-      #   to verify requests originate from Lithic. See
-      #   [this page](https://docs.lithic.com/docs/events-api#verifying-webhooks) for more
-      #   detail about verifying Tokenization Decisioning requests.
+      # program yet, calling this endpoint will create one for you. The headers of the
+      # Tokenization Decisioning request will contain a hmac signature which you can use
+      # to verify requests originate from Lithic. See
+      # [this page](https://docs.lithic.com/docs/events-api#verifying-webhooks) for more
+      # detail about verifying Tokenization Decisioning requests.
       sig do
         params(request_options: T.nilable(T.any(Lithic::RequestOptions, Lithic::Internal::AnyHash)))
           .returns(Lithic::Models::TokenizationSecret)
       end
-      def retrieve_secret(request_options: {})
-      end
+      def retrieve_secret(request_options: {}); end
 
       # Generate a new Tokenization Decisioning secret key. The old Tokenization
-      #   Decisioning secret key will be deactivated 24 hours after a successful request
-      #   to this endpoint.
+      # Decisioning secret key will be deactivated 24 hours after a successful request
+      # to this endpoint.
       sig do
         params(request_options: T.nilable(T.any(Lithic::RequestOptions, Lithic::Internal::AnyHash)))
           .returns(Lithic::Models::TokenizationDecisioningRotateSecretResponse)
       end
-      def rotate_secret(request_options: {})
-      end
+      def rotate_secret(request_options: {}); end
 
       # @api private
       sig { params(client: Lithic::Client).returns(T.attached_class) }
-      def self.new(client:)
-      end
+      def self.new(client:); end
     end
   end
 end

data/rbi/lib/lithic/resources/tokenizations.rbi

@@ -15,9 +15,7 @@ module Lithic
         # Tokenization token
         tokenization_token,
         request_options: {}
-      )
-      end
-
+      ); end
       # List card tokenizations
       sig do
         params(
@@ -43,28 +41,26 @@ module Lithic
         # Filter for tokenizations created before this date.
         end_: nil,
         # A cursor representing an item's token before which a page of results should end.
-        #   Used to retrieve the previous page of results before this item.
+        # Used to retrieve the previous page of results before this item.
         ending_before: nil,
         # Page size (for pagination).
         page_size: nil,
         # A cursor representing an item's token after which a page of results should
-        #   begin. Used to retrieve the next page of results after this item.
+        # begin. Used to retrieve the next page of results after this item.
         starting_after: nil,
         # Filter for tokenizations by tokenization channel. If this is not specified, only
-        #   DIGITAL_WALLET tokenizations will be returned.
+        # DIGITAL_WALLET tokenizations will be returned.
         tokenization_channel: nil,
         request_options: {}
-      )
-      end
-
+      ); end
       # This endpoint is used to ask the card network to activate a tokenization. A
-      #   successful response indicates that the request was successfully delivered to the
-      #   card network. When the card network activates the tokenization, the state will
-      #   be updated and a tokenization.updated event will be sent. The endpoint may only
-      #   be used on digital wallet tokenizations with status `INACTIVE`,
-      #   `PENDING_ACTIVATION`, or `PENDING_2FA`. This will put the tokenization in an
-      #   active state, and transactions will be allowed. Reach out at
-      #   [lithic.com/contact](https://lithic.com/contact) for more information.
+      # successful response indicates that the request was successfully delivered to the
+      # card network. When the card network activates the tokenization, the state will
+      # be updated and a tokenization.updated event will be sent. The endpoint may only
+      # be used on digital wallet tokenizations with status `INACTIVE`,
+      # `PENDING_ACTIVATION`, or `PENDING_2FA`. This will put the tokenization in an
+      # active state, and transactions will be allowed. Reach out at
+      # [lithic.com/contact](https://lithic.com/contact) for more information.
       sig do
         params(
           tokenization_token: String,
@@ -76,18 +72,16 @@ module Lithic
         # Tokenization token
         tokenization_token,
         request_options: {}
-      )
-      end
-
+      ); end
       # This endpoint is used to ask the card network to deactivate a tokenization. A
-      #   successful response indicates that the request was successfully delivered to the
-      #   card network. When the card network deactivates the tokenization, the state will
-      #   be updated and a tokenization.updated event will be sent. Authorizations
-      #   attempted with a deactivated tokenization will be blocked and will not be
-      #   forwarded to Lithic from the network. Deactivating the token is a permanent
-      #   operation. If the target is a digital wallet tokenization, it will be removed
-      #   from its device. Reach out at [lithic.com/contact](https://lithic.com/contact)
-      #   for more information.
+      # successful response indicates that the request was successfully delivered to the
+      # card network. When the card network deactivates the tokenization, the state will
+      # be updated and a tokenization.updated event will be sent. Authorizations
+      # attempted with a deactivated tokenization will be blocked and will not be
+      # forwarded to Lithic from the network. Deactivating the token is a permanent
+      # operation. If the target is a digital wallet tokenization, it will be removed
+      # from its device. Reach out at [lithic.com/contact](https://lithic.com/contact)
+      # for more information.
       sig do
         params(
           tokenization_token: String,
@@ -99,17 +93,15 @@ module Lithic
         # Tokenization token
         tokenization_token,
         request_options: {}
-      )
-      end
-
+      ); end
       # This endpoint is used to ask the card network to pause a tokenization. A
-      #   successful response indicates that the request was successfully delivered to the
-      #   card network. When the card network pauses the tokenization, the state will be
-      #   updated and a tokenization.updated event will be sent. The endpoint may only be
-      #   used on tokenizations with status `ACTIVE`. A paused token will prevent
-      #   merchants from sending authorizations, and is a temporary status that can be
-      #   changed. Reach out at [lithic.com/contact](https://lithic.com/contact) for more
-      #   information.
+      # successful response indicates that the request was successfully delivered to the
+      # card network. When the card network pauses the tokenization, the state will be
+      # updated and a tokenization.updated event will be sent. The endpoint may only be
+      # used on tokenizations with status `ACTIVE`. A paused token will prevent
+      # merchants from sending authorizations, and is a temporary status that can be
+      # changed. Reach out at [lithic.com/contact](https://lithic.com/contact) for more
+      # information.
       sig do
         params(
           tokenization_token: String,
@@ -121,19 +113,17 @@ module Lithic
         # Tokenization token
         tokenization_token,
         request_options: {}
-      )
-      end
-
+      ); end
       # This endpoint is used to ask the card network to send another activation code to
-      #   a cardholder that has already tried tokenizing a card. A successful response
-      #   indicates that the request was successfully delivered to the card network. The
-      #   endpoint may only be used on Mastercard digital wallet tokenizations with status
-      #   `INACTIVE`, `PENDING_ACTIVATION`, or `PENDING_2FA`. The network will send a new
-      #   activation code to the one of the contact methods provided in the initial
-      #   tokenization flow. If a user fails to enter the code correctly 3 times, the
-      #   contact method will not be eligible for resending the activation code, and the
-      #   cardholder must restart the provision process. Reach out at
-      #   [lithic.com/contact](https://lithic.com/contact) for more information.
+      # a cardholder that has already tried tokenizing a card. A successful response
+      # indicates that the request was successfully delivered to the card network. The
+      # endpoint may only be used on Mastercard digital wallet tokenizations with status
+      # `INACTIVE`, `PENDING_ACTIVATION`, or `PENDING_2FA`. The network will send a new
+      # activation code to the one of the contact methods provided in the initial
+      # tokenization flow. If a user fails to enter the code correctly 3 times, the
+      # contact method will not be eligible for resending the activation code, and the
+      # cardholder must restart the provision process. Reach out at
+      # [lithic.com/contact](https://lithic.com/contact) for more information.
       sig do
         params(
           tokenization_token: String,
@@ -146,15 +136,13 @@ module Lithic
         # Tokenization token
         tokenization_token,
         # The communication method that the user has selected to use to receive the
-        #   authentication code. Supported Values: Sms = "TEXT_TO_CARDHOLDER_NUMBER". Email
-        #   = "EMAIL_TO_CARDHOLDER_ADDRESS"
+        # authentication code. Supported Values: Sms = "TEXT_TO_CARDHOLDER_NUMBER". Email
+        # = "EMAIL_TO_CARDHOLDER_ADDRESS"
         activation_method_type: nil,
         request_options: {}
-      )
-      end
-
+      ); end
       # This endpoint is used to simulate a card's tokenization in the Digital Wallet
-      #   and merchant tokenization ecosystem.
+      # and merchant tokenization ecosystem.
       sig do
         params(
           cvv: String,
@@ -179,27 +167,25 @@ module Lithic
         # The source of the tokenization request.
         tokenization_source:,
         # The account score (1-5) that represents how the Digital Wallet's view on how
-        #   reputable an end user's account is.
+        # reputable an end user's account is.
         account_score: nil,
         # The device score (1-5) that represents how the Digital Wallet's view on how
-        #   reputable an end user's device is.
+        # reputable an end user's device is.
         device_score: nil,
         # Optional field to specify the token requestor name for a merchant token
-        #   simulation. Ignored when tokenization_source is not MERCHANT.
+        # simulation. Ignored when tokenization_source is not MERCHANT.
         entity: nil,
         # The decision that the Digital Wallet's recommend
         wallet_recommended_decision: nil,
         request_options: {}
-      )
-      end
-
+      ); end
       # This endpoint is used to ask the card network to unpause a tokenization. A
-      #   successful response indicates that the request was successfully delivered to the
-      #   card network. When the card network unpauses the tokenization, the state will be
-      #   updated and a tokenization.updated event will be sent. The endpoint may only be
-      #   used on tokenizations with status `PAUSED`. This will put the tokenization in an
-      #   active state, and transactions may resume. Reach out at
-      #   [lithic.com/contact](https://lithic.com/contact) for more information.
+      # successful response indicates that the request was successfully delivered to the
+      # card network. When the card network unpauses the tokenization, the state will be
+      # updated and a tokenization.updated event will be sent. The endpoint may only be
+      # used on tokenizations with status `PAUSED`. This will put the tokenization in an
+      # active state, and transactions may resume. Reach out at
+      # [lithic.com/contact](https://lithic.com/contact) for more information.
       sig do
         params(
           tokenization_token: String,
@@ -211,17 +197,15 @@ module Lithic
         # Tokenization token
         tokenization_token,
         request_options: {}
-      )
-      end
-
+      ); end
       # This endpoint is used update the digital card art for a digital wallet
-      #   tokenization. A successful response indicates that the card network has updated
-      #   the tokenization's art, and the tokenization's `digital_cart_art_token` field
-      #   was updated. The endpoint may not be used on tokenizations with status
-      #   `DEACTIVATED`. Note that this updates the art for one specific tokenization, not
-      #   all tokenizations for a card. New tokenizations for a card will be created with
-      #   the art referenced in the card object's `digital_card_art_token` field. Reach
-      #   out at [lithic.com/contact](https://lithic.com/contact) for more information.
+      # tokenization. A successful response indicates that the card network has updated
+      # the tokenization's art, and the tokenization's `digital_cart_art_token` field
+      # was updated. The endpoint may not be used on tokenizations with status
+      # `DEACTIVATED`. Note that this updates the art for one specific tokenization, not
+      # all tokenizations for a card. New tokenizations for a card will be created with
+      # the art referenced in the card object's `digital_card_art_token` field. Reach
+      # out at [lithic.com/contact](https://lithic.com/contact) for more information.
       sig do
         params(
           tokenization_token: String,
@@ -234,18 +218,15 @@ module Lithic
         # Tokenization token
         tokenization_token,
         # Specifies the digital card art to be displayed in the user’s digital wallet for
-        #   a tokenization. This artwork must be approved by the network and configured by
-        #   Lithic to use. See
-        #   [Flexible Card Art Guide](https://docs.lithic.com/docs/about-digital-wallets#flexible-card-art).
+        # a tokenization. This artwork must be approved by the network and configured by
+        # Lithic to use. See
+        # [Flexible Card Art Guide](https://docs.lithic.com/docs/about-digital-wallets#flexible-card-art).
         digital_card_art_token: nil,
         request_options: {}
-      )
-      end
-
+      ); end
       # @api private
       sig { params(client: Lithic::Client).returns(T.attached_class) }
-      def self.new(client:)
-      end
+      def self.new(client:); end
     end
   end
 end

data/rbi/lib/lithic/resources/transactions/enhanced_commercial_data.rbi

@@ -5,7 +5,7 @@ module Lithic
     class Transactions
       class EnhancedCommercialData
         # Get all L2/L3 enhanced commercial data associated with a transaction. Not
-        #   available in sandbox.
+        # available in sandbox.
         sig do
           params(
             transaction_token: String,
@@ -17,13 +17,10 @@ module Lithic
           # The token of the transaction that the enhanced data is associated with.
           transaction_token,
           request_options: {}
-        )
-        end
-
+        ); end
         # @api private
         sig { params(client: Lithic::Client).returns(T.attached_class) }
-        def self.new(client:)
-        end
+        def self.new(client:); end
       end
     end
   end

data/rbi/lib/lithic/resources/transactions/events/enhanced_commercial_data.rbi

@@ -6,7 +6,7 @@ module Lithic
       class Events
         class EnhancedCommercialData
           # Get L2/L3 enhanced commercial data associated with a transaction event. Not
-          #   available in sandbox.
+          # available in sandbox.
           sig do
             params(
               event_token: String,
@@ -18,13 +18,10 @@ module Lithic
             # The token of the transaction event that the enhanced data is associated with.
             event_token,
             request_options: {}
-          )
-          end
-
+          ); end
           # @api private
           sig { params(client: Lithic::Client).returns(T.attached_class) }
-          def self.new(client:)
-          end
+          def self.new(client:); end
         end
       end
     end

data/rbi/lib/lithic/resources/transactions/events.rbi

@@ -9,8 +9,7 @@ module Lithic
 
         # @api private
         sig { params(client: Lithic::Client).returns(T.attached_class) }
-        def self.new(client:)
-        end
+        def self.new(client:); end
       end
     end
   end