listen 3.0.8 → 3.7.1

checksums.yaml

@@ -1,7 +1,7 @@
 ---
-SHA1:
-  metadata.gz: f18e337415a04b4714aa6a4b52bbf21a7c8a3d01
-  data.tar.gz: e70d968dd1f9d350a35d319bd932c521d15e0b75
+SHA256:
+  metadata.gz: 800a9d0af997cb48bc330b0aeaecdcb39b53e9bdeb2dbed6c08fd03b237a3d36
+  data.tar.gz: 5caa12c52d09e7447d0f1b43fddadf03e4e33ae4c611bd0ed7d367e3cd3a280b
 SHA512:
-  metadata.gz: 3a84d19f4ecc7131d6ccfddf937c77f8d05b786a4b84d05bbf0808efd16d3066ecff5b2d25c511b3ac7fe70d73ad208f748a1236edc92ccb7bd8ec9f82b832b0
-  data.tar.gz: 5bbab04e17fa7e957343cad614936a59ea822af8e4a77657317b40a854f6fa3b8c0b2c26e7480b3fcd8e71129cdcdc0e66219c412a9e27f94e66df04b4792fc9
+  metadata.gz: 8fa9b8758f30b8ececde07ca321a23fb02c9cfbec59e587011b1598d297f8a0a451728fb394e0bc1fa182e7ef40e4598bfa82b035bdccc29f6375b5df95dda6f
+  data.tar.gz: 8b94d5ab7085f27382cfca52d32ff8717c3d17f14ed3632a96853e8e4bcd2174bbc8f5f8f0ff3709f739b13c440fb87a82540bb0ae784395896fb0513837895a

data/CONTRIBUTING.md

@@ -4,7 +4,7 @@ Contribute to Listen
 File an issue
 -------------
 
-If you haven't already, first see [TROUBLESHOOTING](https://github.com/guard/listen/wiki/Troubleshooting) for known issues, solutions and workarounds.
+If you haven't already, first see [TROUBLESHOOTING](https://github.com/guard/listen/blob/master/README.md#Issues-and-Troubleshooting) for known issues, solutions and workarounds.
 
 You can report bugs and feature requests to [GitHub Issues](https://github.com/guard/listen/issues).
 
@@ -16,7 +16,7 @@ Try to figure out where the issue belongs to: Is it an issue with Listen itself
 
 **It's most likely that your bug gets resolved faster if you provide as much information as possible!**
 
-The MOST useful information is debugging output from Listen (`LISTEN_GEM_DEBUGGING=1`) - see [TROUBLESHOOTING](https://github.com/guard/listen/wiki/Troubleshooting) for details.
+The MOST useful information is debugging output from Listen (`LISTEN_GEM_DEBUGGING=1`) - see [TROUBLESHOOTING](https://github.com/guard/listen/blob/master/README.md#Issues-and-Troubleshooting) for details.
 
 
 Development
@@ -31,8 +31,15 @@ Pull requests are very welcome! Please try to follow these simple rules if appli
 * Make sure your patches are well tested. All specs run with `rake spec` must pass.
 * Update the [Yard](http://yardoc.org/) documentation.
 * Update the [README](https://github.com/guard/listen/blob/master/README.md).
-* Update the [CHANGELOG](https://github.com/guard/listen/blob/master/CHANGELOG.md) for noteworthy changes.
 * Please **do not change** the version number.
 
+The title of your PR will automatically be included in the release notes for the next version of the gem. A maintainer can add one of the following GitHub labels to the PR to automatically categorize it when the release notes are generated:
+
+- ⚠️ Breaking
+- ✨ Feature
+- 🐛 Bug Fix
+- 📚 Docs
+- 🏠 Housekeeping
+
 For questions please join us in our [Google group](http://groups.google.com/group/guard-dev) or on
 `#guard` (irc.freenode.net).

data/README.md

@@ -1,10 +1,11 @@
-:exclamation: Listen is currently accepting more maintainers. Please [read this](https://github.com/guard/guard/wiki/Maintainers) if you're interested in joining the team.
-
 # Listen
 
-[![Gem Version](https://badge.fury.io/rb/listen.png)](http://badge.fury.io/rb/listen) [![Build Status](https://travis-ci.org/guard/listen.png)](https://travis-ci.org/guard/listen) [![Dependency Status](https://gemnasium.com/guard/listen.png)](https://gemnasium.com/guard/listen) [![Code Climate](https://codeclimate.com/github/guard/listen.png)](https://codeclimate.com/github/guard/listen) [![Coverage Status](https://coveralls.io/repos/guard/listen/badge.png?branch=master)](https://coveralls.io/r/guard/listen)
+The `listen` gem listens to file modifications and notifies you about the changes.
 
-The Listen gem listens to file modifications and notifies you about the changes.
+[![Development Status](https://github.com/guard/listen/workflows/Development/badge.svg)](https://github.com/guard/listen/actions?workflow=Development)
+[![Gem Version](https://badge.fury.io/rb/listen.svg)](http://badge.fury.io/rb/listen)
+[![Code Climate](https://codeclimate.com/github/guard/listen.svg)](https://codeclimate.com/github/guard/listen)
+[![Coverage Status](https://coveralls.io/repos/guard/listen/badge.svg?branch=master)](https://coveralls.io/r/guard/listen)
 
 ## Features
 
@@ -13,72 +14,116 @@ The Listen gem listens to file modifications and notifies you about the changes.
 * You can watch multiple directories.
 * Regexp-patterns for ignoring paths for more accuracy and speed
 * Increased change detection accuracy on OS X HFS and VFAT volumes.
-* Tested on MRI Ruby environments (2.0+ only) via [Travis CI](https://travis-ci.org/guard/listen),
+* Continuous Integration: tested on selected Ruby environments via [Github Workflows](https:///github.com/guard/listen/master/.github/workflows).
 
 ## Issues / limitations
 
 * Limited support for symlinked directories ([#279](https://github.com/guard/listen/issues/279)):
   * Symlinks are always followed ([#25](https://github.com/guard/listen/issues/25)).
-  * Symlinked directories pointing within a watched directory are not supported ([#273](https://github.com/guard/listen/pull/273)- see [Duplicate directory errors](https://github.com/guard/listen/wiki/Duplicate-directory-errors)).
+  * Symlinked directories pointing within a watched directory are not supported ([#273](https://github.com/guard/listen/pull/273).
 * No directory/adapter-specific configuration options.
 * Support for plugins planned for future.
-* TCP functionality was removed in Listen [3.0.0](https://github.com/guard/listen/releases/tag/v3.0.0) ([#319](https://github.com/guard/listen/issues/319), [#218](https://github.com/guard/listen/issues/218)). There are plans to extract this feature to separate gems ([#258](https://github.com/guard/listen/issues/258)), until this is finished, you can use by locking the `listen` gem to version `'~> 2.10'`.
+* TCP functionality was removed in `listen` [3.0.0](https://github.com/guard/listen/releases/tag/v3.0.0) ([#319](https://github.com/guard/listen/issues/319), [#218](https://github.com/guard/listen/issues/218)). There are plans to extract this feature to separate gems ([#258](https://github.com/guard/listen/issues/258)), until this is finished, you can use by locking the `listen` gem to version `'~> 2.10'`.
 * Some filesystems won't work without polling (VM/Vagrant Shared folders, NFS, Samba, sshfs, etc.).
-* Specs suite on JRuby and Rubinius aren't reliable on Travis CI, but should work.
 * Windows and \*BSD adapter aren't continuously and automatically tested.
 * OSX adapter has some performance limitations ([#342](https://github.com/guard/listen/issues/342)).
-* Ruby 1.9.3 is no longer maintained (and may not work with Listen) - it's best to upgrade to Ruby 2.2.2.
+* Listeners do not notify across forked processes, if you wish for multiple processes to receive change notifications you must [listen inside of each process](https://github.com/guard/listen/issues/398#issuecomment-223957952).
 
 Pull requests or help is very welcome for these.
 
 ## Install
 
-The simplest way to install Listen is to use [Bundler](http://bundler.io).
+The simplest way to install `listen` is to use [Bundler](http://bundler.io).
+
+```ruby
+gem 'listen'
+```
 
+## Complete Example
+Here is a complete example of using the `listen` gem:
 ```ruby
-gem 'listen', '~> 3.0' # NOTE: for TCP functionality, use '~> 2.10' for now
+require 'listen'
+
+listener = Listen.to('/srv/app') do |modified, added, removed|
+  puts(modified: modified, added: added, removed: removed)
+end
+listener.start
+sleep
+```
+Running the above in the background, you can see the callback block being called in response to each command:
+```
+$ cd /srv/app
+$ touch a.txt
+{:modified=>[], :added=>["/srv/app/a.txt"], :removed=>[]}
+
+$ echo more >> a.txt
+{:modified=>["/srv/app/a.txt"], :added=>[], :removed=>[]}
+
+$ mv a.txt b.txt
+{:modified=>[], :added=>["/srv/app/b.txt"], :removed=>["/srv/app/a.txt"]}
+
+$ vi b.txt
+# add a line to this new file and press ZZ to save and exit
+{:modified=>["/srv/app/b.txt"], :added=>[], :removed=>[]}
+
+$ vi c.txt
+# add a line and press ZZ to save and exit
+{:modified=>[], :added=>["/srv/app/c.txt"], :removed=>[]}
+
+$ rm b.txt c.txt
+{:modified=>[], :added=>[], :removed=>["/srv/app/b.txt", "/srv/app/c.txt"]}
 ```
 
 ## Usage
 
-Call `Listen.to` with either a single directory or multiple directories, then define the "changes" callback in a block.
+Call `Listen.to` with one or more directories and the "changes" callback passed as a block.
 
 ``` ruby
 listener = Listen.to('dir/to/listen', 'dir/to/listen2') do |modified, added, removed|
-  puts "modified absolute path: #{modified}"
-  puts "added absolute path: #{added}"
-  puts "removed absolute path: #{removed}"
+  puts "modified absolute path array: #{modified}"
+  puts "added absolute path array: #{added}"
+  puts "removed absolute path array: #{removed}"
 end
-listener.start # not blocking
+listener.start # starts a listener thread--does not block
+
+# do whatever you want here...just don't exit the process :)
+
 sleep
 ```
+## Changes Callback
 
-### Pause / unpause / stop
+Changes to the listened-to directories are reported by the listener thread in a callback.
+The callback receives **three** array parameters: `modified`, `added` and `removed`, in that order.
+Each of these three is always an array with 0 or more entries.
+Each array entry is an absolute path.
 
-Listeners can also be easily paused/unpaused:
+### Pause / start / stop
+
+Listeners can also be easily paused and later un-paused with start:
 
 ``` ruby
 listener = Listen.to('dir/path/to/listen') { |modified, added, removed| puts 'handle changes here...' }
 
 listener.start
-listener.paused? # => false
+listener.paused?     # => false
 listener.processing? # => true
 
-listener.pause   # stops processing changes (but keeps on collecting them)
-listener.paused? # => true
+listener.pause       # stops processing changes (but keeps on collecting them)
+listener.paused?     # => true
 listener.processing? # => false
 
-listener.unpause # resumes processing changes ("start" would do the same)
-listener.stop    # stop both listening to changes and processing them
+listener.start       # resumes processing changes
+listener.stop        # stop both listening to changes and processing them
 ```
 
-  Note: While paused, Listen keeps on collecting changes in the background - to clear them, call "stop"
+  Note: While paused, `listen` keeps on collecting changes in the background - to clear them, call `stop`.
 
-  Note: You should keep track of all started listeners and stop them properly on finish.
+  Note: You should keep track of all started listeners and `stop` them properly on finish.
 
 ### Ignore / ignore!
 
-Listen ignores some directories and extensions by default (See DEFAULT_IGNORED_DIRECTORIES and DEFAULT_IGNORED_EXTENSIONS in Listen::Silencer), you can add ignoring patterns with the `ignore` option/method or overwrite default with `ignore!` option/method.
+`Listen` ignores some directories and extensions by default (See DEFAULT_IGNORED_FILES and DEFAULT_IGNORED_EXTENSIONS in Listen::Silencer).
+You can add ignoring patterns with the `ignore` option/method or overwrite default with `ignore!` option/method.
 
 ``` ruby
 listener = Listen.to('dir/path/to/listen', ignore: /\.txt/) { |modified, added, removed| # ... }
@@ -90,11 +135,11 @@ sleep
 
 Note: `:ignore` regexp patterns are evaluated against relative paths.
 
-Note: Ignoring paths does not improve performance, except when Polling ([#274](https://github.com/guard/listen/issues/274))
+Note: Ignoring paths does not improve performance, except when Polling ([#274](https://github.com/guard/listen/issues/274)).
 
 ### Only
 
-Listen catches all files (less the ignored ones) by default. If you want to only listen to a specific type of file (i.e., just `.rb` extension), you should use the `only` option/method.
+`Listen` watches all files (less the ignored ones) by default. If you want to only listen to a specific type of file (i.e., just `.rb` extension), you should use the `only` option/method.
 
 ``` ruby
 listener = Listen.to('dir/path/to/listen', only: /\.rb$/) { |modified, added, removed| # ... }
@@ -106,42 +151,13 @@ sleep
 Note: `:only` regexp patterns are evaluated only against relative **file** paths.
 
 
-## Changes callback
-
-Changes to the listened-to directories gets reported back to the user in a callback.
-The registered callback gets invoked, when there are changes, with **three** parameters:
-`modified`, `added` and `removed` paths, in that particular order.
-Paths are always returned in their absolute form.
-
-Example:
-
-```ruby
-listener = Listen.to('path/to/app') do |modified, added, removed|
-  # This block will be called when there are changes.
-end
-listener.start
-sleep
-```
-
-or ...
-
-```ruby
-# Create a callback
-callback = Proc.new do |modified, added, removed|
-  # This proc will be called when there are changes.
-end
-listener = Listen.to('dir', &callback)
-listener.start
-sleep
-```
-
 ## Options
 
 All the following options can be set through the `Listen.to` after the directory path(s) params.
 
 ```ruby
 ignore: [%r{/foo/bar}, /\.pid$/, /\.coffee$/]   # Ignore a list of paths
-                                                # default: See DEFAULT_IGNORED_DIRECTORIES and DEFAULT_IGNORED_EXTENSIONS in Listen::Silencer
+                                                # default: See DEFAULT_IGNORED_FILES and DEFAULT_IGNORED_EXTENSIONS in Listen::Silencer
 
 ignore!: %r{/foo/bar}                           # Same as ignore options, but overwrite default ignored paths.
 
@@ -164,16 +180,42 @@ polling_fallback_message: 'custom message'      # Set a custom polling fallback
                                                 # default: "Listen will be polling for changes. Learn more at https://github.com/guard/listen#listen-adapters."
 ```
 
-## Debugging
+## Logging and Debugging
 
-Setting the environment variable `LISTEN_GEM_DEBUGGING=1` sets up the INFO level logger, while `LISTEN_GEM_DEBUGGING=2` sets up the DEBUG level logger. 
+`Listen` logs its activity to `Listen.logger`.
+This is the primary method of debugging.
 
-You can also set `Listen.logger` to a custom logger.
+### Custom Logger
+You can call `Listen.logger =` to set a custom `listen` logger for the process. For example:
+```
+Listen.logger = Rails.logger
+```
 
+### Default Logger
+If no custom logger is set, a default `listen` logger which logs to to `STDERR` will be created and assigned to `Listen.logger`.
 
-## Listen adapters
+The default logger defaults to the `error` logging level (severity).
+You can override the logging level by setting the environment variable `LISTEN_GEM_DEBUGGING=<level>`.
+For `<level>`, all standard `::Logger` levels are supported, with any mix of upper-/lower-case:
+```
+export LISTEN_GEM_DEBUGGING=debug # or 2 [deprecated]
+export LISTEN_GEM_DEBUGGING=info  # or 1 or true or yes [deprecated]
+export LISTEN_GEM_DEBUGGING=warn
+export LISTEN_GEM_DEBUGGING=fatal
+export LISTEN_GEM_DEBUGGING=error
+```
+The default of `error` will be used if an unsupported value is set.
 
-The Listen gem has a set of adapters to notify it when there are changes.
+Note: The alternate values `1`, `2`, `true` and `yes` shown above are deprecated and will be removed from `listen` v4.0.
+
+### Disabling Logging
+If you want to disable `listen` logging, set
+```
+Listen.logger = ::Logger.new('/dev/null')
+```
+## Listen Adapters
+
+The `Listen` gem has a set of adapters to notify it when there are changes.
 
 There are 4 OS-specific adapters to support Darwin, Linux, \*BSD and Windows.
 These adapters are fast as they use some system-calls to implement the notifying function.
@@ -181,9 +223,9 @@ These adapters are fast as they use some system-calls to implement the notifying
 There is also a polling adapter - although it's much slower than other adapters,
 it works on every platform/system and scenario (including network filesystems such as VM shared folders).
 
-The Darwin and Linux adapters are dependencies of the Listen gem so they work out of the box. For other adapters a specific gem will have to be added to your Gemfile, please read below.
+The Darwin and Linux adapters are dependencies of the `listen` gem so they work out of the box. For other adapters a specific gem will have to be added to your Gemfile, please read below.
 
-The Listen gem will choose the best adapter automatically, if present. If you
+The `listen` gem will choose the best adapter automatically, if present. If you
 want to force the use of the polling adapter, use the `:force_polling` option
 while initializing the listener.
 
@@ -194,7 +236,7 @@ If you are on Windows, it's recommended to use the [`wdm`](https://github.com/Ma
 Please add the following to your Gemfile:
 
 ```ruby
-gem 'wdm', '>= 0.1.0' if Gem.win_platform?
+gem 'wdm', '>= 0.1.0', platforms: [:mingw, :mswin, :x64_mingw, :jruby]
 ```
 
 ### On \*BSD
@@ -213,35 +255,144 @@ end
 
 ### Getting the [polling fallback message](#options)?
 
-Please visit the [installation section of the Listen WIKI](https://github.com/guard/listen/wiki#installation) for more information and options for potential fixes.
+If you see:
+```
+Listen will be polling for changes.
+```
 
-### Issues and troubleshooting
+This means the Listen gem can’t find an optimized adapter. Typically this is caused by:
 
-*NOTE: without providing the output after setting the `LISTEN_GEM_DEBUGGING=1` environment variable, it can be almost impossible to guess why listen is not working as expected.*
+- You’re on Windows and WDM gem isn’t installed.
+- You’re running the app without Bundler or RubyGems.
+- Using Sass which includes an ancient (the “dinosaur” type of ancient) version of the Listen gem.
 
-See [TROUBLESHOOTING](https://github.com/guard/listen/wiki/Troubleshooting)
+Possible solutions:
+
+1. Suppress the message by using the :force_polling option. Or, you could just ignore the message since it’s harmless.
+2. Windows users: Install the WDM gem.
+3. Upgrade Ruby (use RubyInstaller for Windows or RVM/rbenv for Mac) and RubyGems.
+3. Run your apps using Bundler.
+4. Sass users: Install the latest version of Listen and try again.
+
+#### Simplified Bundler and Sass example
+Create a Gemfile with these lines:
+```
+source 'https://rubygems.org'
+gem 'listen'
+gem 'sass'
+```
+Next, use Bundler to update gems:
+```
+$ bundle update
+$ bundle exec sass --watch # ... or whatever app is using Listen.
+```
+
+### Increasing the amount of inotify watchers
+
+If you are running Debian, RedHat, or another similar Linux distribution, run the following in a terminal:
+```
+$ sudo sh -c "echo fs.inotify.max_user_watches=524288 >> /etc/sysctl.conf"
+$ sudo sysctl -p
+```
+If you are running ArchLinux, search the `/etc/sysctl.d/` directory for config files with the setting:
+```
+$ grep -H -s "fs.inotify.max_user_watches" /etc/sysctl.d/*
+/etc/sysctl.d/40-max_user_watches.conf:fs.inotify.max_user_watches=100000
+```
+Then change the setting in the file you found above to a higher value (see [here](https://www.archlinux.org/news/deprecation-of-etcsysctlconf/) for why):
+```
+$ sudo sh -c "echo fs.inotify.max_user_watches=524288 > /etc/sysctl.d/40-max-user-watches.conf"
+$ sudo sysctl --system
+```
+
+#### The technical details
+Listen uses `inotify` by default on Linux to monitor directories for changes.
+It's not uncommon to encounter a system limit on the number of files you can monitor.
+For example, Ubuntu Lucid's (64bit) `inotify` limit is set to 8192.
+
+You can get your current inotify file watch limit by executing:
+```
+$ cat /proc/sys/fs/inotify/max_user_watches
+```
+When this limit is not enough to monitor all files inside a directory, the limit must be increased for Listen to work properly.
+
+You can set a new limit temporarily with:
+```
+$ sudo sysctl fs.inotify.max_user_watches=524288
+$ sudo sysctl -p
+```
+If you like to make your limit permanent, use:
+```
+$ sudo sh -c "echo fs.inotify.max_user_watches=524288 >> /etc/sysctl.conf"
+$ sudo sysctl -p
+```
+You may also need to pay attention to the values of `max_queued_events` and `max_user_instances` if Listen keeps on complaining.
+
+#### More info
+Man page for [inotify(7)](https://linux.die.net/man/7/inotify).
+Blog post: [limit of inotify](https://blog.sorah.jp/2012/01/24/inotify-limitation).
+
+### Issues and Troubleshooting
+
+If the gem doesn't work as expected, start by setting `LISTEN_GEM_DEBUGGING=debug` or `LISTEN_GEM_DEBUGGING=info` as described above in [Logging and Debugging](#logging-and-debugging).
+
+*NOTE: without providing the output after setting the `LISTEN_GEM_DEBUGGING=debug` environment variable, it is usually impossible to guess why `listen` is not working as expected.*
+
+#### 3 steps before you start diagnosing problems
+These 3 steps will:
+
+- help quickly troubleshoot obscure problems (trust me, most of them are obscure)
+- help quickly identify the area of the problem (a full list is below)
+- help you get familiar with listen's diagnostic mode (it really comes in handy, trust me)
+- help you create relevant output before you submit an issue (so we can respond with answers instead of tons of questions)
+
+Step 1 - The most important option in Listen
+For effective troubleshooting set the `LISTEN_GEM_DEBUGGING=info` variable before starting `listen`.
+
+Step 2 - Verify polling works
+Polling has to work ... or something is really wrong (and we need to know that before anything else).
+
+(see force_polling option).
+
+After starting `listen`, you should see something like:
+```
+INFO -- : Record.build(): 0.06773114204406738 seconds
+```
+Step 3 - Trigger some changes directly without using editors or apps
+Make changes e.g. touch foo or echo "a" >> foo (for troubleshooting, avoid using an editor which could generate too many misleading events).
+
+You should see something like:
+```
+INFO -- : listen: raw changes: [[:added, "/home/me/foo"]]
+INFO -- : listen: final changes: {:modified=>[], :added=>["/home/me/foo"], :removed=>[]}
+```
+"raw changes" contains changes collected during the :wait_for_delay and :latency intervals, while "final changes" is what listen decided are relevant changes (for better editor support).
 
 ## Performance
 
-If Listen seems slow or unresponsive, make sure you're not using the Polling adapter (you should see a warning upon startup if you are).
+If `listen` seems slow or unresponsive, make sure you're not using the Polling adapter (you should see a warning upon startup if you are).
 
 Also, if the directories you're watching contain many files, make sure you're:
 
 * not using Polling (ideally)
 * using `:ignore` and `:only` options to avoid tracking directories you don't care about (important with Polling and on MacOS)
-* running Listen with the `:latency` and `:wait_for_delay` options not too small or too big (depends on needs)
+* running `listen` with the `:latency` and `:wait_for_delay` options not too small or too big (depends on needs)
 * not watching directories with log files, database files or other frequently changing files
-* not using a version of Listen prior to 2.7.7
-* not getting silent crashes within Listen (see LISTEN_GEM_DEBUGGING=2)
-* not running multiple instances of Listen in the background
+* not using a version of `listen` prior to 2.7.7
+* not getting silent crashes within `listen` (see `LISTEN_GEM_DEBUGGING=debug`)
+* not running multiple instances of `listen` in the background
 * using a file system with atime modification disabled (ideally)
 * not using a filesystem with inaccurate file modification times (ideally), e.g. HFS, VFAT
 * not buffering to a slow terminal (e.g. transparency + fancy font + slow gfx card + lots of output)
 * ideally not running a slow encryption stack, e.g. btrfs + ecryptfs
 
-When in doubt, LISTEN_GEM_DEBUGGING=2 can help discover the actual events and time they happened.
+When in doubt, `LISTEN_GEM_DEBUGGING=debug` can help discover the actual events and time they happened.
 
-See also [Tips and Techniques](https://github.com/guard/listen/wiki/Tips-and-Techniques).
+## Tips and Techniques
+- Watch only directories you're interested in.
+- Set your editor to save quickly (e.g. without backup files, without atomic-save)
+- Tweak the `:latency` and `:wait_for_delay` options until you get good results (see [options](#options)).
+- Add `:ignore` rules to silence all events you don't care about (reduces a lot of noise, especially if you use it on directories)
 
 ## Development
 
@@ -259,11 +410,29 @@ Pull requests are very welcome! Please try to follow these simple rules if appli
 For questions please join us in our [Google group](http://groups.google.com/group/guard-dev) or on
 `#guard` (irc.freenode.net).
 
+## Releasing
+
+### Prerequisites
+
+* You must have commit rights to the GitHub repository.
+* You must have push rights for rubygems.org.
+
+### How to release
+
+1. Run `bundle install` to make sure that you have all the gems necessary for testing and releasing.
+2.  **Ensure all tests are passing by running `bundle exec rake`.**
+3. Determine which would be the correct next version number according to [semver](http://semver.org/).
+4. Update the version in `./lib/listen/version.rb`.
+5. Update the version in the Install section of `./README.md` (`gem 'listen', '~> X.Y'`).
+6. Commit the version in a single commit, the message should be "Preparing vX.Y.Z"
+7. Run `bundle exec rake release:full`; this will tag, push to GitHub, and publish to rubygems.org.
+8. Update and publish the release notes on the [GitHub releases page](https://github.com/guard/listen/releases) if necessary
+
 ## Acknowledgments
 
 * [Michael Kessler (netzpirat)][] for having written the [initial specs](https://github.com/guard/listen/commit/1e457b13b1bb8a25d2240428ce5ed488bafbed1f).
 * [Travis Tilley (ttilley)][] for this awesome work on [fssm][] & [rb-fsevent][].
-* [Nathan Weizenbaum (nex3)][] for [rb-inotify][], a thorough inotify wrapper.
+* [Natalie Weizenbaum (nex3)][] for [rb-inotify][], a thorough inotify wrapper.
 * [Mathieu Arnold (mat813)][] for [rb-kqueue][], a simple kqueue wrapper.
 * [Maher Sallam][] for [wdm][], windows support wouldn't exist without him.
 * [Yehuda Katz (wycats)][] for [vigilo][], that has been a great source of inspiration.
@@ -283,7 +452,7 @@ For questions please join us in our [Google group](http://groups.google.com/grou
 [fssm]: https://github.com/ttilley/fssm
 [rb-fsevent]: https://github.com/thibaudgg/rb-fsevent
 [Mathieu Arnold (mat813)]: https://github.com/mat813
-[Nathan Weizenbaum (nex3)]: https://github.com/nex3
+[Natalie Weizenbaum (nex3)]: https://github.com/nex3
 [rb-inotify]: https://github.com/nex3/rb-inotify
 [stereobooster]: https://github.com/stereobooster
 [rb-fchange]: https://github.com/stereobooster/rb-fchange

data/bin/listen

@@ -1,12 +1,11 @@
 #!/usr/bin/env ruby
+# frozen_string_literal: true
 
 require 'listen'
 require 'listen/cli'
 
-unless defined?(JRUBY_VERSION)
-  if Signal.list.keys.include?('INT')
-    Signal.trap('INT') { Thread.new { Listen.stop } }
-  end
+if !defined?(JRUBY_VERSION) && Signal.list.keys.include?('INT')
+  Signal.trap('INT') { Thread.new { Listen.stop } }
 end
 
 Listen::CLI.start