lisausa-sunspot 1.2.1 → 1.2.1.1

data/solr-1.3/solr/conf/elevate.xml

@@ -1,36 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" ?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<!-- If this file is found in the config directory, it will only be
-     loaded once at startup.  If it is found in Solr's data
-     directory, it will be re-loaded every commit.
--->
-
-<elevate>
- <query text="foo bar">
-  <doc id="1" />
-  <doc id="2" />
-  <doc id="3" />
- </query>
- 
- <query text="ipod">
-   <doc id="MA147LL/A" />  <!-- put the actual ipod at the top -->
-   <doc id="IW-02" exclude="true" /> <!-- exclude this cable -->
- </query>
- 
-</elevate>

data/solr-1.3/solr/conf/protwords.txt

@@ -1,21 +0,0 @@
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#-----------------------------------------------------------------------
-# Use a protected word file to protect against the stemmer reducing two
-# unrelated words to the same base word.
-
-# Some non-words that normally won't be encountered,
-# just to test that they won't be stemmed.
-dontstems
-zwhacky
-

data/solr-1.3/solr/conf/schema.xml

@@ -1,64 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<schema version="0.9" name="sunspot">
-  <types>
-    <fieldtype class="solr.TextField" positionIncrementGap="100" name="text">
-      <analyzer>
-        <tokenizer class="solr.StandardTokenizerFactory"/>
-        <filter class="solr.StandardFilterFactory"/>
-        <filter class="solr.LowerCaseFilterFactory"/>
-      </analyzer>
-    </fieldtype>
-    <fieldtype class="solr.RandomSortField" name="rand"/>
-    <fieldtype name="boolean" class="solr.BoolField" omitNorms="true"/>
-    <fieldtype name="sfloat" class="solr.SortableFloatField" omitNorms="true"/>
-    <fieldtype name="date" class="solr.DateField" omitNorms="true"/>
-    <fieldtype name="sint" class="solr.SortableIntField" omitNorms="true"/>
-    <fieldtype name="string" class="solr.StrField" omitNorms="true"/>
-    <fieldtype name="sdouble" class="solr.SortableDoubleField" omitNorms="true"/>
-    <fieldtype name="slong" class="solr.SortableLongField" omitNorms="true"/>
-  </types>
-  <fields>
-    <field name="id"         type="string"  indexed="true" stored="true"  multiValued="false" />
-    <field name="type"       type="string"  indexed="true" stored="false" multiValued="true" />
-    <field name="class_name" type="string"  indexed="true" stored="false" multiValued="false" />
-    <field name="text"       type="text"    indexed="true" stored="false" multiValued="true" />
-    <field name="lat"        type="sdouble" indexed="true" stored="true"  multiValued="false" />
-    <field name="long"       type="sdouble" indexed="true" stored="true"  multiValued="false" />
-    <dynamicField name="*_text"   type="text"    indexed="true" stored="false" multiValued="true" />
-    <dynamicField name="*_texts"  type="text"    indexed="true" stored="true"  multiValued="true" />
-    <dynamicField name="random_*" type="rand"    indexed="true" stored="false" multiValued="false" />
-    <dynamicField name="_local*" type="sdouble" indexed="true" stored="false" multiValued="false" />
-    <dynamicField name="*_b" type="boolean" indexed="true" stored="false" multiValued="false" />
-    <dynamicField name="*_f" type="sfloat" indexed="true" stored="false" multiValued="false" />
-    <dynamicField name="*_d" type="date" indexed="true" stored="false" multiValued="false" />
-    <dynamicField name="*_i" type="sint" indexed="true" stored="false" multiValued="false" />
-    <dynamicField name="*_s" type="string" indexed="true" stored="false" multiValued="false" />
-    <dynamicField name="*_e" type="sdouble" indexed="true" stored="false" multiValued="false" />
-    <dynamicField name="*_l" type="slong" indexed="true" stored="false" multiValued="false" />
-    <dynamicField name="*_bm" type="boolean" indexed="true" stored="false" multiValued="true" />
-    <dynamicField name="*_fm" type="sfloat" indexed="true" stored="false" multiValued="true" />
-    <dynamicField name="*_dm" type="date" indexed="true" stored="false" multiValued="true" />
-    <dynamicField name="*_im" type="sint" indexed="true" stored="false" multiValued="true" />
-    <dynamicField name="*_sm" type="string" indexed="true" stored="false" multiValued="true" />
-    <dynamicField name="*_em" type="sdouble" indexed="true" stored="false" multiValued="true" />
-    <dynamicField name="*_lm" type="slong" indexed="true" stored="false" multiValued="true" />
-    <dynamicField name="*_bs" type="boolean" indexed="true" stored="true" multiValued="false" />
-    <dynamicField name="*_fs" type="sfloat" indexed="true" stored="true" multiValued="false" />
-    <dynamicField name="*_ds" type="date" indexed="true" stored="true" multiValued="false" />
-    <dynamicField name="*_is" type="sint" indexed="true" stored="true" multiValued="false" />
-    <dynamicField name="*_ss" type="string" indexed="true" stored="true" multiValued="false" />
-    <dynamicField name="*_es" type="sdouble" indexed="true" stored="true" multiValued="false" />
-    <dynamicField name="*_ls" type="slong" indexed="true" stored="true" multiValued="false" />
-    <dynamicField name="*_bms" type="boolean" indexed="true" stored="true" multiValued="true" />
-    <dynamicField name="*_fms" type="sfloat" indexed="true" stored="true" multiValued="true" />
-    <dynamicField name="*_dms" type="date" indexed="true" stored="true" multiValued="true" />
-    <dynamicField name="*_ims" type="sint" indexed="true" stored="true" multiValued="true" />
-    <dynamicField name="*_sms" type="string" indexed="true" stored="true" multiValued="true" />
-    <dynamicField name="*_ems" type="sdouble" indexed="true" stored="true" multiValued="true" />
-    <dynamicField name="*_lms" type="slong" indexed="true" stored="true" multiValued="true" />
-  </fields>
-  <uniqueKey>id</uniqueKey>
-  <defaultSearchField>text</defaultSearchField>
-  <solrQueryParser defaultOperator="AND"/>
-  <copyField dest="text" source="*_text"/>
-</schema>

data/solr-1.3/solr/conf/solrconfig.xml

@@ -1,725 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" ?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<config>
-  <!-- Set this to 'false' if you want solr to continue working after it has 
-       encountered an severe configuration error.  In a production environment, 
-       you may want solr to keep working even if one handler is mis-configured.
-
-       You may also set this to false using by setting the system property:
-         -Dsolr.abortOnConfigurationError=false
-     -->
-  <abortOnConfigurationError>${solr.abortOnConfigurationError:true}</abortOnConfigurationError>
-
-  <!-- Used to specify an alternate directory to hold all index data
-       other than the default ./data under the Solr home.
-       If replication is in use, this should match the replication configuration. -->
-  <dataDir>${solr.data.dir:./solr/data}</dataDir>
-
-
-  <indexDefaults>
-   <!-- Values here affect all index writers and act as a default unless overridden. -->
-    %arr{ :name => 'components' }
-      %str localsolr
-      %str facet
-      %str mlt
-      %str highlight
-      %str debug
-    <useCompoundFile>false</useCompoundFile>
-
-    <mergeFactor>10</mergeFactor>
-    <!--
-     If both ramBufferSizeMB and maxBufferedDocs is set, then Lucene will flush based on whichever limit is hit first.
-
-     -->
-    <!--<maxBufferedDocs>1000</maxBufferedDocs>-->
-    <!-- Tell Lucene when to flush documents to disk.
-    Giving Lucene more memory for indexing means faster indexing at the cost of more RAM
-
-    If both ramBufferSizeMB and maxBufferedDocs is set, then Lucene will flush based on whichever limit is hit first.
-
-    -->
-    <ramBufferSizeMB>32</ramBufferSizeMB>
-    <maxMergeDocs>2147483647</maxMergeDocs>
-    <maxFieldLength>10000</maxFieldLength>
-    <writeLockTimeout>1000</writeLockTimeout>
-    <commitLockTimeout>10000</commitLockTimeout>
-
-    <!--
-     Expert: Turn on Lucene's auto commit capability.
-     This causes intermediate segment flushes to write a new lucene
-     index descriptor, enabling it to be opened by an external
-     IndexReader.
-     NOTE: Despite the name, this value does not have any relation to Solr's autoCommit functionality
-     -->
-    <!--<luceneAutoCommit>false</luceneAutoCommit>-->
-    <!--
-     Expert:
-     The Merge Policy in Lucene controls how merging is handled by Lucene.  The default in 2.3 is the LogByteSizeMergePolicy, previous
-     versions used LogDocMergePolicy.
-
-     LogByteSizeMergePolicy chooses segments to merge based on their size.  The Lucene 2.2 default, LogDocMergePolicy chose when
-     to merge based on number of documents
-
-     Other implementations of MergePolicy must have a no-argument constructor
-     -->
-    <!--<mergePolicy>org.apache.lucene.index.LogByteSizeMergePolicy</mergePolicy>-->
-
-    <!--
-     Expert:
-     The Merge Scheduler in Lucene controls how merges are performed.  The ConcurrentMergeScheduler (Lucene 2.3 default)
-      can perform merges in the background using separate threads.  The SerialMergeScheduler (Lucene 2.2 default) does not.
-     -->
-    <!--<mergeScheduler>org.apache.lucene.index.ConcurrentMergeScheduler</mergeScheduler>-->
-
-    <!--
-      This option specifies which Lucene LockFactory implementation to use.
-      
-      single = SingleInstanceLockFactory - suggested for a read-only index
-               or when there is no possibility of another process trying
-               to modify the index.
-      native = NativeFSLockFactory
-      simple = SimpleFSLockFactory
-
-      (For backwards compatibility with Solr 1.2, 'simple' is the default
-       if not specified.)
-    -->
-    <lockType>single</lockType>
-  </indexDefaults>
-
-  <mainIndex>
-    <!-- options specific to the main on-disk lucene index -->
-    <useCompoundFile>false</useCompoundFile>
-    <ramBufferSizeMB>32</ramBufferSizeMB>
-    <mergeFactor>10</mergeFactor>
-    <!-- Deprecated -->
-    <!--<maxBufferedDocs>1000</maxBufferedDocs>-->
-    <maxMergeDocs>2147483647</maxMergeDocs>
-    <maxFieldLength>10000</maxFieldLength>
-
-    <!-- If true, unlock any held write or commit locks on startup. 
-         This defeats the locking mechanism that allows multiple
-         processes to safely access a lucene index, and should be
-         used with care.
-         This is not needed if lock type is 'none' or 'single'
-     -->
-    <unlockOnStartup>false</unlockOnStartup>
-  </mainIndex>
-  
-  <!--	Enables JMX if and only if an existing MBeanServer is found, use 
-  		this if you want to configure JMX through JVM parameters. Remove
-  		this to disable exposing Solr configuration and statistics to JMX.
-  		
-		If you want to connect to a particular server, specify the agentId
-		e.g. <jmx agentId="myAgent" />
-		
-		If you want to start a new MBeanServer, specify the serviceUrl
-		e.g <jmx serviceurl="service:jmx:rmi:///jndi/rmi://localhost:9999/solr" />
-		
-		For more details see http://wiki.apache.org/solr/SolrJmx
-  -->
-  <jmx />
-
-  <!-- the default high-performance update handler -->
-  <updateHandler class="solr.DirectUpdateHandler2">
-
-    <!-- A prefix of "solr." for class names is an alias that
-         causes solr to search appropriate packages, including
-         org.apache.solr.(search|update|request|core|analysis)
-     -->
-
-    <!-- Perform a <commit/> automatically under certain conditions:
-         maxDocs - number of updates since last commit is greater than this
-         maxTime - oldest uncommited update (in ms) is this long ago
-    <autoCommit> 
-      <maxDocs>10000</maxDocs>
-      <maxTime>1000</maxTime> 
-    </autoCommit>
-    -->
-
-    <!-- The RunExecutableListener executes an external command.
-         exe - the name of the executable to run
-         dir - dir to use as the current working directory. default="."
-         wait - the calling thread waits until the executable returns. default="true"
-         args - the arguments to pass to the program.  default=nothing
-         env - environment variables to set.  default=nothing
-      -->
-    <!-- A postCommit event is fired after every commit or optimize command
-    <listener event="postCommit" class="solr.RunExecutableListener">
-      <str name="exe">solr/bin/snapshooter</str>
-      <str name="dir">.</str>
-      <bool name="wait">true</bool>
-      <arr name="args"> <str>arg1</str> <str>arg2</str> </arr>
-      <arr name="env"> <str>MYVAR=val1</str> </arr>
-    </listener>
-    -->
-    <!-- A postOptimize event is fired only after every optimize command, useful
-         in conjunction with index distribution to only distribute optimized indicies 
-    <listener event="postOptimize" class="solr.RunExecutableListener">
-      <str name="exe">snapshooter</str>
-      <str name="dir">solr/bin</str>
-      <bool name="wait">true</bool>
-    </listener>
-    -->
-
-  </updateHandler>
-
-
-  <query>
-    <!-- Maximum number of clauses in a boolean query... can affect
-        range or prefix queries that expand to big boolean
-        queries.  An exception is thrown if exceeded.  -->
-    <maxBooleanClauses>1024</maxBooleanClauses>
-
-    
-    <!-- Cache used by SolrIndexSearcher for filters (DocSets),
-         unordered sets of *all* documents that match a query.
-         When a new searcher is opened, its caches may be prepopulated
-         or "autowarmed" using data from caches in the old searcher.
-         autowarmCount is the number of items to prepopulate.  For LRUCache,
-         the autowarmed items will be the most recently accessed items.
-       Parameters:
-         class - the SolrCache implementation (currently only LRUCache)
-         size - the maximum number of entries in the cache
-         initialSize - the initial capacity (number of entries) of
-           the cache.  (seel java.util.HashMap)
-         autowarmCount - the number of entries to prepopulate from
-           and old cache.
-         -->
-    <filterCache
-      class="solr.LRUCache"
-      size="512"
-      initialSize="512"
-      autowarmCount="128"/>
-
-   <!-- queryResultCache caches results of searches - ordered lists of
-         document ids (DocList) based on a query, a sort, and the range
-         of documents requested.  -->
-    <queryResultCache
-      class="solr.LRUCache"
-      size="512"
-      initialSize="512"
-      autowarmCount="32"/>
-
-  <!-- documentCache caches Lucene Document objects (the stored fields for each document).
-       Since Lucene internal document ids are transient, this cache will not be autowarmed.  -->
-    <documentCache
-      class="solr.LRUCache"
-      size="512"
-      initialSize="512"
-      autowarmCount="0"/>
-
-    <!-- If true, stored fields that are not requested will be loaded lazily.
-
-    This can result in a significant speed improvement if the usual case is to
-    not load all stored fields, especially if the skipped fields are large compressed
-    text fields.
-    -->
-    <enableLazyFieldLoading>true</enableLazyFieldLoading>
-
-    <!-- Example of a generic cache.  These caches may be accessed by name
-         through SolrIndexSearcher.getCache(),cacheLookup(), and cacheInsert().
-         The purpose is to enable easy caching of user/application level data.
-         The regenerator argument should be specified as an implementation
-         of solr.search.CacheRegenerator if autowarming is desired.  -->
-    <!--
-    <cache name="myUserCache"
-      class="solr.LRUCache"
-      size="4096"
-      initialSize="1024"
-      autowarmCount="1024"
-      regenerator="org.mycompany.mypackage.MyRegenerator"
-      />
-    -->
-
-   <!-- An optimization that attempts to use a filter to satisfy a search.
-         If the requested sort does not include score, then the filterCache
-         will be checked for a filter matching the query. If found, the filter
-         will be used as the source of document ids, and then the sort will be
-         applied to that.
-    <useFilterForSortedQuery>true</useFilterForSortedQuery>
-   -->
-
-   <!-- An optimization for use with the queryResultCache.  When a search
-         is requested, a superset of the requested number of document ids
-         are collected.  For example, if a search for a particular query
-         requests matching documents 10 through 19, and queryWindowSize is 50,
-         then documents 0 through 49 will be collected and cached.  Any further
-         requests in that range can be satisfied via the cache.  -->
-    <queryResultWindowSize>50</queryResultWindowSize>
-    
-    <!-- Maximum number of documents to cache for any entry in the
-         queryResultCache. -->
-    <queryResultMaxDocsCached>200</queryResultMaxDocsCached>
-
-    <!-- This entry enables an int hash representation for filters (DocSets)
-         when the number of items in the set is less than maxSize.  For smaller
-         sets, this representation is more memory efficient, more efficient to
-         iterate over, and faster to take intersections.  -->
-    <HashDocSet maxSize="3000" loadFactor="0.75"/>
-
-    <!-- a newSearcher event is fired whenever a new searcher is being prepared
-         and there is a current searcher handling requests (aka registered). -->
-    <!-- QuerySenderListener takes an array of NamedList and executes a
-         local query request for each NamedList in sequence. -->
-    <listener event="newSearcher" class="solr.QuerySenderListener">
-      <arr name="queries">
-        <lst> <str name="q">solr</str> <str name="start">0</str> <str name="rows">10</str> </lst>
-        <lst> <str name="q">rocks</str> <str name="start">0</str> <str name="rows">10</str> </lst>
-        <lst><str name="q">static newSearcher warming query from solrconfig.xml</str></lst>
-      </arr>
-    </listener>
-
-    <!-- a firstSearcher event is fired whenever a new searcher is being
-         prepared but there is no current registered searcher to handle
-         requests or to gain autowarming data from. -->
-    <listener event="firstSearcher" class="solr.QuerySenderListener">
-      <arr name="queries">
-        <lst> <str name="q">fast_warm</str> <str name="start">0</str> <str name="rows">10</str> </lst>
-        <lst><str name="q">static firstSearcher warming query from solrconfig.xml</str></lst>
-      </arr>
-    </listener>
-
-    <!-- If a search request comes in and there is no current registered searcher,
-         then immediately register the still warming searcher and use it.  If
-         "false" then all requests will block until the first searcher is done
-         warming. -->
-    <useColdSearcher>false</useColdSearcher>
-
-    <!-- Maximum number of searchers that may be warming in the background
-      concurrently.  An error is returned if this limit is exceeded. Recommend
-      1-2 for read-only slaves, higher for masters w/o cache warming. -->
-    <maxWarmingSearchers>2</maxWarmingSearchers>
-
-  </query>
-
-  <!-- 
-    Let the dispatch filter handler /select?qt=XXX
-    handleSelect=true will use consistent error handling for /select and /update
-    handleSelect=false will use solr1.1 style error formatting
-    -->
-  <requestDispatcher handleSelect="true" >
-    <!--Make sure your system has some authentication before enabling remote streaming!  -->
-    <requestParsers enableRemoteStreaming="false" multipartUploadLimitInKB="2048" />
-        
-    <!-- Set HTTP caching related parameters (for proxy caches and clients).
-          
-         To get the behaviour of Solr 1.2 (ie: no caching related headers)
-         use the never304="true" option and do not specify a value for
-         <cacheControl>
-    -->
-    <!-- <httpCaching never304="true"> -->
-    <httpCaching lastModifiedFrom="openTime"
-                 etagSeed="Solr">
-       <!-- lastModFrom="openTime" is the default, the Last-Modified value
-            (and validation against If-Modified-Since requests) will all be
-            relative to when the current Searcher was opened.
-            You can change it to lastModFrom="dirLastMod" if you want the
-            value to exactly corrispond to when the physical index was last
-            modified.
-               
-            etagSeed="..." is an option you can change to force the ETag
-            header (and validation against If-None-Match requests) to be
-            differnet even if the index has not changed (ie: when making
-            significant changes to your config file)
-
-            lastModifiedFrom and etagSeed are both ignored if you use the
-            never304="true" option.
-       -->
-       <!-- If you include a <cacheControl> directive, it will be used to
-            generate a Cache-Control header, as well as an Expires header
-            if the value contains "max-age="
-               
-            By default, no Cache-Control header is generated.
-
-            You can use the <cacheControl> option even if you have set
-            never304="true"
-       -->
-       <!-- <cacheControl>max-age=30, public</cacheControl> -->
-    </httpCaching>
-  </requestDispatcher>
-  
-      
-  <!-- requestHandler plugins... incoming queries will be dispatched to the
-     correct handler based on the path or the qt (query type) param.
-     Names starting with a '/' are accessed with the a path equal to the 
-     registered name.  Names without a leading '/' are accessed with:
-      http://host/app/select?qt=name
-     If no qt is defined, the requestHandler that declares default="true"
-     will be used.
-  -->
-  <requestHandler name="standard" class="solr.SearchHandler" default="true">
-    <!-- default values for query parameters -->
-     <lst name="defaults">
-       <str name="echoParams">explicit</str>
-       <!-- 
-       <int name="rows">10</int>
-       <str name="fl">*</str>
-       <str name="version">2.1</str>
-        -->
-     </lst>
-  </requestHandler>
-
-
-  <!-- DisMaxRequestHandler allows easy searching across multiple fields
-       for simple user-entered phrases.  It's implementation is now
-       just the standard SearchHandler with a default query type
-       of "dismax". 
-       see http://wiki.apache.org/solr/DisMaxRequestHandler
-   -->
-  <requestHandler name="dismax" class="solr.SearchHandler" >
-    <lst name="defaults">
-     <str name="defType">dismax</str>
-     <str name="echoParams">explicit</str>
-     <float name="tie">0.01</float>
-     <str name="qf">
-        text^0.5 features^1.0 name^1.2 sku^1.5 id^10.0 manu^1.1 cat^1.4
-     </str>
-     <str name="pf">
-        text^0.2 features^1.1 name^1.5 manu^1.4 manu_exact^1.9
-     </str>
-     <str name="bf">
-        ord(popularity)^0.5 recip(rord(price),1,1000,1000)^0.3
-     </str>
-     <str name="fl">
-        id,name,price,score
-     </str>
-     <str name="mm">
-        2&lt;-1 5&lt;-2 6&lt;90%
-     </str>
-     <int name="ps">100</int>
-     <str name="q.alt">*:*</str>
-     <!-- example highlighter config, enable per-query with hl=true -->     
-     <str name="hl.fl">text features name</str>
-     <!-- for this field, we want no fragmenting, just highlighting -->
-     <str name="f.name.hl.fragsize">0</str>
-     <!-- instructs Solr to return the field itself if no query terms are
-          found -->
-     <str name="f.name.hl.alternateField">name</str>
-     <str name="f.text.hl.fragmenter">regex</str> <!-- defined below -->
-    </lst>
-  </requestHandler>
-
-  <!-- Note how you can register the same handler multiple times with
-       different names (and different init parameters)
-    -->
-  <requestHandler name="partitioned" class="solr.SearchHandler" >
-    <lst name="defaults">
-     <str name="defType">dismax</str>
-     <str name="echoParams">explicit</str>
-     <str name="qf">text^0.5 features^1.0 name^1.2 sku^1.5 id^10.0</str>
-     <str name="mm">2&lt;-1 5&lt;-2 6&lt;90%</str>
-     <!-- This is an example of using Date Math to specify a constantly
-          moving date range in a config...
-       -->
-     <str name="bq">incubationdate_dt:[* TO NOW/DAY-1MONTH]^2.2</str>
-    </lst>
-    <!-- In addition to defaults, "appends" params can be specified
-         to identify values which should be appended to the list of
-         multi-val params from the query (or the existing "defaults").
-
-         In this example, the param "fq=instock:true" will be appended to
-         any query time fq params the user may specify, as a mechanism for
-         partitioning the index, independent of any user selected filtering
-         that may also be desired (perhaps as a result of faceted searching).
-
-         NOTE: there is *absolutely* nothing a client can do to prevent these
-         "appends" values from being used, so don't use this mechanism
-         unless you are sure you always want it.
-      -->
-    <lst name="appends">
-      <str name="fq">inStock:true</str>
-    </lst>
-    <!-- "invariants" are a way of letting the Solr maintainer lock down
-         the options available to Solr clients.  Any params values
-         specified here are used regardless of what values may be specified
-         in either the query, the "defaults", or the "appends" params.
-
-         In this example, the facet.field and facet.query params are fixed,
-         limiting the facets clients can use.  Faceting is not turned on by
-         default - but if the client does specify facet=true in the request,
-         these are the only facets they will be able to see counts for;
-         regardless of what other facet.field or facet.query params they
-         may specify.
-
-         NOTE: there is *absolutely* nothing a client can do to prevent these
-         "invariants" values from being used, so don't use this mechanism
-         unless you are sure you always want it.
-      -->
-    <lst name="invariants">
-      <str name="facet.field">cat</str>
-      <str name="facet.field">manu_exact</str>
-      <str name="facet.query">price:[* TO 500]</str>
-      <str name="facet.query">price:[500 TO *]</str>
-    </lst>
-  </requestHandler>
-  
-
-  <!--
-   Search components are registered to SolrCore and used by Search Handlers
-   
-   By default, the following components are avaliable:
-    
-   <searchComponent name="query"     class="org.apache.solr.handler.component.QueryComponent" />
-   <searchComponent name="facet"     class="org.apache.solr.handler.component.FacetComponent" />
-   <searchComponent name="mlt"       class="org.apache.solr.handler.component.MoreLikeThisComponent" />
-   <searchComponent name="highlight" class="org.apache.solr.handler.component.HighlightComponent" />
-   <searchComponent name="debug"     class="org.apache.solr.handler.component.DebugComponent" />
-
-   Default configuration in a requestHandler would look like:
-    <arr name="components">
-      <str>query</str>
-      <str>facet</str>
-      <str>mlt</str>
-      <str>highlight</str>
-      <str>debug</str>
-    </arr>
-
-    If you register a searchComponent to one of the standard names, that will be used instead.
-    To insert handlers before or after the 'standard' components, use:
-    
-    <arr name="first-components">
-      <str>myFirstComponentName</str>
-    </arr>
-    
-    <arr name="last-components">
-      <str>myLastComponentName</str>
-    </arr>
-  -->
-
-   <!-- The spell check component can return a list of alternative spelling
-  suggestions.  -->
-  <searchComponent name="spellcheck" class="solr.SpellCheckComponent">
-
-    <str name="queryAnalyzerFieldType">textSpell</str>
-
-    <lst name="spellchecker">
-      <str name="name">default</str>
-      <str name="field">spell</str>
-      <str name="spellcheckIndexDir">./spellchecker1</str>
-
-    </lst>
-    <lst name="spellchecker">
-      <str name="name">jarowinkler</str>
-      <str name="field">spell</str>
-      <!-- Use a different Distance Measure -->
-      <str name="distanceMeasure">org.apache.lucene.search.spell.JaroWinklerDistance</str>
-      <str name="spellcheckIndexDir">./spellchecker2</str>
-
-    </lst>
-
-    <lst name="spellchecker">
-      <str name="classname">solr.FileBasedSpellChecker</str>
-      <str name="name">file</str>
-      <str name="sourceLocation">spellings.txt</str>
-      <str name="characterEncoding">UTF-8</str>
-      <str name="spellcheckIndexDir">./spellcheckerFile</str>
-    </lst>
-  </searchComponent>
-
-  <!-- a request handler utilizing the spellcheck component -->
-  <requestHandler name="/spellCheckCompRH" class="solr.SearchHandler">
-    <lst name="defaults">
-      <!-- omp = Only More Popular -->
-      <str name="spellcheck.onlyMorePopular">false</str>
-      <!-- exr = Extended Results -->
-      <str name="spellcheck.extendedResults">false</str>
-      <!--  The number of suggestions to return -->
-      <str name="spellcheck.count">1</str>
-    </lst>
-    <arr name="last-components">
-      <str>spellcheck</str>
-    </arr>
-  </requestHandler>
- 
-  <!-- a search component that enables you to configure the top results for
-       a given query regardless of the normal lucene scoring.-->
-  <searchComponent name="elevator" class="solr.QueryElevationComponent" >
-    <!-- pick a fieldType to analyze queries -->
-    <str name="queryFieldType">string</str>
-    <str name="config-file">elevate.xml</str>
-  </searchComponent>
- 
-  <!-- a request handler utilizing the elevator component -->
-  <requestHandler name="/elevate" class="solr.SearchHandler" startup="lazy">
-    <lst name="defaults">
-      <str name="echoParams">explicit</str>
-    </lst>
-    <arr name="last-components">
-      <str>elevator</str>
-    </arr>
-  </requestHandler>
-  
-
-  <!-- Update request handler.  
-  
-       Note: Since solr1.1 requestHandlers requires a valid content type header if posted in 
-       the body. For example, curl now requires: -H 'Content-type:text/xml; charset=utf-8'
-       The response format differs from solr1.1 formatting and returns a standard error code.
-       
-       To enable solr1.1 behavior, remove the /update handler or change its path
-    -->
-  <requestHandler name="/update" class="solr.XmlUpdateRequestHandler" />
-
-  <!--
-   Analysis request handler.  Since Solr 1.3.  Use to returnhow a document is analyzed.  Useful
-   for debugging and as a token server for other types of applications
-   -->
-  <requestHandler name="/analysis" class="solr.AnalysisRequestHandler" />
-  
-
-  <!-- CSV update handler, loaded on demand -->
-  <requestHandler name="/update/csv" class="solr.CSVRequestHandler" startup="lazy" />
-
-
-  <!-- 
-   Admin Handlers - This will register all the standard admin RequestHandlers.  Adding 
-   this single handler is equivolent to registering:
-   
-  <requestHandler name="/admin/luke"       class="org.apache.solr.handler.admin.LukeRequestHandler" />
-  <requestHandler name="/admin/system"     class="org.apache.solr.handler.admin.SystemInfoHandler" />
-  <requestHandler name="/admin/plugins"    class="org.apache.solr.handler.admin.PluginInfoHandler" />
-  <requestHandler name="/admin/threads"    class="org.apache.solr.handler.admin.ThreadDumpHandler" />
-  <requestHandler name="/admin/properties" class="org.apache.solr.handler.admin.PropertiesRequestHandler" />
-  <requestHandler name="/admin/file"       class="org.apache.solr.handler.admin.ShowFileRequestHandler" >
-  
-  If you wish to hide files under ${solr.home}/conf, explicitly register the ShowFileRequestHandler using:
-  <requestHandler name="/admin/file" class="org.apache.solr.handler.admin.ShowFileRequestHandler" >
-    <lst name="invariants">
-     <str name="hidden">synonyms.txt</str> 
-     <str name="hidden">anotherfile.txt</str> 
-    </lst>
-  </requestHandler>
-  -->
-  <requestHandler name="/admin/" class="org.apache.solr.handler.admin.AdminHandlers" />
-  
-  <!-- ping/healthcheck -->
-  <requestHandler name="/admin/ping" class="PingRequestHandler">
-    <lst name="defaults">
-      <str name="qt">standard</str>
-      <str name="q">solrpingquery</str>
-      <str name="echoParams">all</str>
-    </lst>
-  </requestHandler>
-    
-  <!-- Echo the request contents back to the client -->
-  <requestHandler name="/debug/dump" class="solr.DumpRequestHandler" >
-    <lst name="defaults">
-     <str name="echoParams">explicit</str> <!-- for all params (including the default etc) use: 'all' -->
-     <str name="echoHandler">true</str>
-    </lst>
-  </requestHandler>
-  
-  <highlighting>
-   <!-- Configure the standard fragmenter -->
-   <!-- This could most likely be commented out in the "default" case -->
-   <fragmenter name="gap" class="org.apache.solr.highlight.GapFragmenter" default="true">
-    <lst name="defaults">
-     <int name="hl.fragsize">100</int>
-    </lst>
-   </fragmenter>
-
-   <!-- A regular-expression-based fragmenter (f.i., for sentence extraction) -->
-   <fragmenter name="regex" class="org.apache.solr.highlight.RegexFragmenter">
-    <lst name="defaults">
-      <!-- slightly smaller fragsizes work better because of slop -->
-      <int name="hl.fragsize">70</int>
-      <!-- allow 50% slop on fragment sizes -->
-      <float name="hl.regex.slop">0.5</float> 
-      <!-- a basic sentence pattern -->
-      <str name="hl.regex.pattern">[-\w ,/\n\"']{20,200}</str>
-    </lst>
-   </fragmenter>
-   
-   <!-- Configure the standard formatter -->
-   <formatter name="html" class="org.apache.solr.highlight.HtmlFormatter" default="true">
-    <lst name="defaults">
-     <str name="hl.simple.pre"><![CDATA[<em>]]></str>
-     <str name="hl.simple.post"><![CDATA[</em>]]></str>
-    </lst>
-   </formatter>
-  </highlighting>
-  
-  
-  <!-- queryResponseWriter plugins... query responses will be written using the
-    writer specified by the 'wt' request parameter matching the name of a registered
-    writer.
-    The "default" writer is the default and will be used if 'wt' is not specified 
-    in the request. XMLResponseWriter will be used if nothing is specified here.
-    The json, python, and ruby writers are also available by default.
-
-    <queryResponseWriter name="xml" class="org.apache.solr.request.XMLResponseWriter" default="true"/>
-    <queryResponseWriter name="json" class="org.apache.solr.request.JSONResponseWriter"/>
-    <queryResponseWriter name="python" class="org.apache.solr.request.PythonResponseWriter"/>
-    <queryResponseWriter name="ruby" class="org.apache.solr.request.RubyResponseWriter"/>
-    <queryResponseWriter name="php" class="org.apache.solr.request.PHPResponseWriter"/>
-    <queryResponseWriter name="phps" class="org.apache.solr.request.PHPSerializedResponseWriter"/>
-
-    <queryResponseWriter name="custom" class="com.example.MyResponseWriter"/>
-  -->
-
-  <!-- XSLT response writer transforms the XML output by any xslt file found
-       in Solr's conf/xslt directory.  Changes to xslt files are checked for
-       every xsltCacheLifetimeSeconds.  
-   -->
-  <queryResponseWriter name="xslt" class="org.apache.solr.request.XSLTResponseWriter">
-    <int name="xsltCacheLifetimeSeconds">5</int>
-  </queryResponseWriter> 
-
-
-  <queryParser name="lucene" class="org.apache.solr.search.LuceneQParserPlugin"/>
-
-  <!-- example of registering a custom function parser 
-  <valueSourceParser name="myfunc" class="com.mycompany.MyValueSourceParser" />
-  -->
-    
-  <!-- config for the admin interface --> 
-  <admin>
-    <defaultQuery>solr</defaultQuery>
-    
-    <!-- configure a healthcheck file for servers behind a loadbalancer
-    <healthcheck type="file">server-enabled</healthcheck>
-    -->
-  </admin>
-
-  <!-- configuration for LocalSolr -->
-  <updateRequestProcessorChain>
-    <processor class='com.pjaol.search.solr.update.LocalUpdateProcessorFactory'>
-      <str name='latField'>lat</str>
-      <str name='lngField'>long</str>
-      <int name='startTier'>9</int>
-      <int name='endTier'>16</int>
-    </processor>
-    <processor class='solr.RunUpdateProcessorFactory'></processor>
-    <processor class='solr.LogUpdateProcessorFactory'></processor>
-  </updateRequestProcessorChain>
-  <searchComponent class='com.pjaol.search.solr.component.LocalSolrQueryComponent' name='localsolr'>
-    <str name='latField'>lat</str>
-    <str name='lngField'>long</str>
-  </searchComponent>
-  <requestHandler class='org.apache.solr.handler.component.SearchHandler' name='geo'>
-    <str name="defType">lucene</str>
-    <arr name='components'>
-      <str>localsolr</str>
-      <str>facet</str>
-      <str>mlt</str>
-      <str>highlight</str>
-      <str>debug</str>
-    </arr>
-  </requestHandler>
-</config>