linode 0.7.7 → 0.7.8

data/CHANGELOG

@@ -1,5 +1,11 @@
 
-n.n.n / 2011-10-17
+0.7.8 / 2012-04-26
+==================
+
+  * set yamler, when necessary, for github issue #12
+  * make Rakefile more robust for rdoc versions
+
+0.7.7 / 2011-10-17
 ==================
 
   * Adds support for linode.ip.addprivate API method (thanks to Adam Durana)

data/Gemfile.lock

@@ -20,6 +20,7 @@ PLATFORMS
   ruby
 
 DEPENDENCIES
+  crack
   httparty
   mocha
   rake (= 0.8.7)

data/README.md

@@ -0,0 +1,276 @@
+# Linode Ruby API
+
+## INSTALLATION:
+
+ Make sure gemcutter.org is in your gem sources list, then:
+
+     % sudo gem install linode
+
+ To run tests you will need both rspec and mocha installed.
+
+## RUNNING:
+
+Consult the Linode API guide here: [http://www.linode.com/api/autodoc.cfm](http://www.linode.com/api/autodoc.cfm)    
+You will need to get an API key (check your account profile).
+
+Here is an annoyingly exhaustive IRB session where I play around with the API:
+
+    irb> require 'rubygems'
+    irb> require 'linode'
+    irb> api_key = 'TOPSECRETAPIKEY'
+    irb> l = Linode.new(:api_key => api_key)
+    => #<Linode:0x100e03c @api_key="TOPSECRETAPIKEY">
+
+    irb> result = l.test.echo(:foo => 'bar', :baz => 'xyzzy')
+    => #<OpenStruct baz="xyzzy", foo="bar">
+    irb> result.foo
+    => "bar"
+    
+    irb> result.baz
+    => "xyzzy"
+ 
+    irb> result = l.avail.datacenters
+    => [#<OpenStruct datacenterid=2, location="Dallas, TX, USA">, #<OpenStruct datacenterid=3, location="Fremont, CA,
+    USA">, #<OpenStruct datacenterid=4, location="Atlanta, GA, USA">, #<OpenStruct datacenterid=6, location="Newark, NJ,
+    USA">]
+    irb> s = _
+    => [#<OpenStruct datacenterid=2, location="Dallas, TX, USA">, #<OpenStruct datacenterid=3, location="Fremont, CA,
+    USA">, #<OpenStruct datacenterid=4, location="Atlanta, GA, USA">, #<OpenStruct datacenterid=6, location="Newark, NJ,
+    USA">]
+    irb> result.first
+    => #<OpenStruct datacenterid=2, location="Dallas, TX, USA">
+    irb> result.first.location
+    => "Dallas, TX, USA"
+    irb> l.avail.datacenters.collect {|i| i.location }
+    => ["Dallas, TX, USA", "Fremont, CA, USA", "Atlanta, GA, USA", "Newark, NJ, USA"]
+    irb> l.avail.datacenters.collect {|i| i.datacenterid }
+    => [2, 3, 4, 6]
+
+    irb> l.user.getapikey(:username => 'me', :password => 'SECKRIT')
+    => #<OpenStruct api_key="TOPSECRETAPIKEY", username="me">
+    irb> l.user.getapikey(:username => 'me', :password => 'SECKRIT').api_key
+    => "TOPSECRETAPIKEY"
+    irb> l.user.getapikey(:username => 'me', :password => 'SECKRIT').username
+    => "me"
+ 
+    irb> l.avail.kernels
+    => [#<OpenStruct isxen=1, label="2.6.16.38-x86_64-linode2", kernelid=85>, #<OpenStruct isxen=1,
+    label="2.6.18.8-domU-linode7", kernelid=81>, #<OpenStruct isxen=1, label="2.6.18.8-linode10", kernelid=89>,
+    #<OpenStruct isxen=1, label="2.6.18.8-linode16", kernelid=98>, #<OpenStruct isxen=1,
+    label="2.6.18.8-x86_64-linode1", kernelid=86>, #<OpenStruct isxen=1, label="2.6.24.4-linode8", kernelid=84>,
+    #<OpenStruct isxen=1, label="2.6.25-linode9", kernelid=88>, #<OpenStruct isxen=1, label="2.6.25.10-linode12",
+    kernelid=90>, #<OpenStruct isxen=1, label="2.6.26-linode13", kernelid=91>, #<OpenStruct isxen=1,
+    label="2.6.27.4-linode14", kernelid=93>, #<OpenStruct isxen=1, label="2.6.27.4-x86_64-linode3", kernelid=94>,
+    #<OpenStruct isxen=1, label="2.6.28-linode15", kernelid=96>, #<OpenStruct isxen=1,
+    label="2.6.28-x86_64-linode4", kernelid=97>, #<OpenStruct isxen=1, label="2.6.28.3-linode17", kernelid=99>,
+    #<OpenStruct isxen=1, label="2.6.28.3-x86_64-linode5", kernelid=100>, #<OpenStruct isxen=1,
+    label="2.6.29-linode18", kernelid=101>, #<OpenStruct isxen=1, label="2.6.29-x86_64-linode6", kernelid=102>,
+    #<OpenStruct isxen=1, label="Latest 2.6 Series (2.6.18.8-linode16)", kernelid=60>, #<OpenStruct isxen=1,
+    label="pv-grub-x86_32", kernelid=92>, #<OpenStruct isxen=1, label="pv-grub-x86_64", kernelid=95>, #<OpenStruct
+    isxen=1, label="Recovery - Finnix (kernel)", kernelid=61>]
+    irb> l.avail.kernels.size
+    => 21
+    irb> l.avail.kernels.first
+    => #<OpenStruct isxen=1, label="2.6.16.38-x86_64-linode2", kernelid=85>
+    irb> l.avail.kernels.first.label
+    => "2.6.16.38-x86_64-linode2"
+
+    irb> l.avail.linodeplans
+    => [#<OpenStruct ram=360, label="Linode 360", avail={"6"=>26, "2"=>57, "3"=>20, "4"=>39}, price=19.95, planid=1,
+    xfer=200, disk=16>, #<OpenStruct ram=540, label="Linode 540", avail={"6"=>11, "2"=>38, "3"=>14, "4"=>28},
+    price=29.95, planid=2, xfer=300, disk=24>, #<OpenStruct ram=720, label="Linode 720", avail={"6"=>13, "2"=>27,
+    "3"=>18, "4"=>30}, price=39.95, planid=3, xfer=400, disk=32>, #<OpenStruct ram=1080, label="Linode 1080",
+    avail={"6"=>18, "2"=>7, "3"=>9, "4"=>4}, price=59.95, planid=4, xfer=600, disk=48>, #<OpenStruct ram=1440,
+    label="Linode 1440", avail={"6"=>14, "2"=>5, "3"=>7, "4"=>3}, price=79.95, planid=5, xfer=800, disk=64>,
+    #<OpenStruct ram=2880, label="Linode 2880", avail={"6"=>3, "2"=>3, "3"=>3, "4"=>3}, price=159.95, planid=6,
+    xfer=1600, disk=128>, #<OpenStruct ram=5760, label="Linode 5760", avail={"6"=>5, "2"=>6, "3"=>5, "4"=>5},
+    price=319.95, planid=7, xfer=2000, disk=256>, #<OpenStruct ram=8640, label="Linode 8640", avail={"6"=>5, "2"=>6,
+    "3"=>5, "4"=>5}, price=479.95, planid=8, xfer=2000, disk=384>, #<OpenStruct ram=11520, label="Linode 11520",
+    avail={"6"=>5, "2"=>6, "3"=>5, "4"=>5}, price=639.95, planid=9, xfer=2000, disk=512>, #<OpenStruct ram=14400,
+    label="Linode 14400", avail={"6"=>5, "2"=>6, "3"=>5, "4"=>5}, price=799.95, planid=10, xfer=2000, disk=640>]
+    irb> l.avail.linodeplans.size
+    => 10
+    irb> l.avail.linodeplans.first
+    => #<OpenStruct ram=360, label="Linode 360", avail={"6"=>26, "2"=>57, "3"=>20, "4"=>39}, price=19.95, planid=1,
+    xfer=200, disk=16>
+    irb> l.avail.linodeplans.first.avail
+    => {"6"=>26, "2"=>57, "3"=>20, "4"=>39}
+
+    irb> l.avail.distributions
+    => [#<OpenStruct label="Arch Linux 2007.08", minimagesize=436, create_dt="2007-10-24 00:00:00.0", is64bit=0,
+    distributionid=38>, #<OpenStruct label="Centos 5.0", minimagesize=594, create_dt="2007-04-27 00:00:00.0",
+    is64bit=0, distributionid=32>, #<OpenStruct label="Centos 5.2", minimagesize=950, create_dt="2008-11-30 00:00:00.0",
+    is64bit=0, distributionid=46>, #<OpenStruct label="Centos 5.2 64bit", minimagesize=980,
+    create_dt="2008-11-30 00:00:00.0", is64bit=1, distributionid=47>, #<OpenStruct label="Debian 4.0",
+    minimagesize=200, create_dt="2007-04-18 00:00:00.0", is64bit=0, distributionid=28>, #<OpenStruct
+    label="Debian 4.0 64bit", minimagesize=220, create_dt="2008-12-02 00:00:00.0", is64bit=1, distributionid=48>,
+    #<OpenStruct label="Debian 5.0", minimagesize=200, create_dt="2009-02-19 00:00:00.0", is64bit=0, distributionid=50>,
+    #<OpenStruct label="Debian 5.0 64bit", minimagesize=300, create_dt="2009-02-19 00:00:00.0", is64bit=1,
+    distributionid=51>, #<OpenStruct label="Fedora 8", minimagesize=740, create_dt="2007-11-09 00:00:00.0", is64bit=0,
+    distributionid=40>, #<OpenStruct label="Fedora 9", minimagesize=1175, create_dt="2008-06-09 15:15:21.0", is64bit=0,
+    distributionid=43>, #<OpenStruct label="Gentoo 2007.0", minimagesize=1800, create_dt="2007-08-29 00:00:00.0",
+    is64bit=0, distributionid=35>, #<OpenStruct label="Gentoo 2008.0", minimagesize=1500,
+    create_dt="2009-03-20 00:00:00.0", is64bit=0, distributionid=52>, #<OpenStruct label="Gentoo 2008.0 64bit",
+    minimagesize=2500, create_dt="2009-04-04 00:00:00.0", is64bit=1, distributionid=53>, #<OpenStruct
+    label="OpenSUSE 11.0", minimagesize=850, create_dt="2008-08-21 08:32:16.0", is64bit=0, distributionid=44>,
+    #<OpenStruct label="Slackware 12.0", minimagesize=315, create_dt="2007-07-16 00:00:00.0", is64bit=0,
+    distributionid=34>, #<OpenStruct label="Slackware 12.2", minimagesize=500, create_dt="2009-04-04 00:00:00.0",
+    is64bit=0, distributionid=54>, #<OpenStruct label="Ubuntu 8.04 LTS", minimagesize=400,
+    create_dt="2008-04-23 15:11:29.0", is64bit=0, distributionid=41>, #<OpenStruct label="Ubuntu 8.04 LTS 64bit",
+    minimagesize=350, create_dt="2008-06-03 12:51:11.0", is64bit=1, distributionid=42>,
+    #<OpenStruct label="Ubuntu 8.10", minimagesize=220, create_dt="2008-10-30 23:23:03.0", is64bit=0,
+    distributionid=45>, #<OpenStruct label="Ubuntu 8.10 64bit", minimagesize=230, create_dt="2008-12-02 00:00:00.0",
+    is64bit=1, distributionid=49>, #<OpenStruct label="Ubuntu 9.04", minimagesize=350,
+    create_dt="2009-04-23 00:00:00.0", is64bit=0, distributionid=55>, #<OpenStruct label="Ubuntu 9.04 64bit",
+    minimagesize=350, create_dt="2009-04-23 00:00:00.0", is64bit=1, distributionid=56>]
+    irb> l.avail.distributions.size
+    => 22
+    irb> l.avail.distributions.first
+    => #<OpenStruct label="Arch Linux 2007.08", minimagesize=436, create_dt="2007-10-24 00:00:00.0", is64bit=0,
+    distributionid=38>
+    irb> l.avail.distributions.first.label
+    => "Arch Linux 2007.08"
+
+    irb> l.domain.resource.list
+    RuntimeError: Error completing request [domain.resource.list] @ [https://api.linode.com/] with data [{}]:
+    ERRORCODE6ERRORMESSAGEDOMAINID is required but was not passed in
+    	from ./lib/linode.rb:31:in `send_request'
+    	from ./lib/linode.rb:13:in `list'
+    	from (irb):3
+    irb> l.domain.resource.list(:DomainId => '1')
+    RuntimeError: Error completing request [domain.resource.list] @ [https://api.linode.com/] with data
+    [{:DomainId=>"1"}]: ERRORCODE5ERRORMESSAGEObject not found
+    	from ./lib/linode.rb:31:in `send_request'
+    	from ./lib/linode.rb:13:in `list'
+    	from (irb):5
+    irb> l.domain.resource.list(:DomainId => '1', :ResourceId => '2')
+    RuntimeError: Error completing request [domain.resource.list] @ [https://api.linode.com/] with data
+    [{:DomainId=>"1", :ResourceId=>"2"}]: ERRORCODE5ERRORMESSAGEObject not found
+    	from ./lib/linode.rb:31:in `send_request'
+    	from ./lib/linode.rb:13:in `list'
+    	from (irb):7
+
+    irb> l.linode
+    => #<Linode::Linode:0x10056e4 @api_url="https://api.linode.com/", @api_key="TOPSECRETAPIKEY">
+    irb> l.linode.list
+    => [#<OpenStruct datacenterid=6, lpm_displaygroup="", totalxfer=600, alert_bwquota_enabled=1,
+    alert_diskio_enabled=1, watchdog=1, alert_cpu_threshold=90, alert_bwout_threshold=5, backupsenabled=0,
+    backupweeklyday="", status=1, alert_cpu_enabled=1, label="byggvir", totalram=1080, backupwindow=0,
+    alert_diskio_threshold=300, alert_bwin_threshold=5, alert_bwquota_threshold=80, linodeid=12446, totalhd=49152,
+    alert_bwin_enabled=1, alert_bwout_enabled=1>, #<OpenStruct datacenterid=4, lpm_displaygroup="", totalxfer=200,
+    alert_bwquota_enabled=1, alert_diskio_enabled=1, watchdog=1, alert_cpu_threshold=90, alert_bwout_threshold=5,
+    backupsenabled=0, backupweeklyday="", status=1, alert_cpu_enabled=1, label="bragi", totalram=360, backupwindow=0,
+    alert_diskio_threshold=300, alert_bwin_threshold=5, alert_bwquota_threshold=80, linodeid=15418, totalhd=16384,
+    alert_bwin_enabled=1, alert_bwout_enabled=1>, #<OpenStruct datacenterid=2, lpm_displaygroup="", totalxfer=200,
+    alert_bwquota_enabled=1, alert_diskio_enabled=1, watchdog=1, alert_cpu_threshold=90, alert_bwout_threshold=5,
+    backupsenabled=0, backupweeklyday="", status=1, alert_cpu_enabled=1, label="nerthus", totalram=360, backupwindow=0,
+    alert_diskio_threshold=300, alert_bwin_threshold=5, alert_bwquota_threshold=80, linodeid=15419, totalhd=16384,
+    alert_bwin_enabled=1, alert_bwout_enabled=1>, #<OpenStruct datacenterid=3, lpm_displaygroup="", totalxfer=200,
+    alert_bwquota_enabled=1, alert_diskio_enabled=1, watchdog=1, alert_cpu_threshold=90, alert_bwout_threshold=5,
+    backupsenabled=0, backupweeklyday=0, status=1, alert_cpu_enabled=1, label="hoenir", totalram=360, backupwindow=0,
+    alert_diskio_threshold=500, alert_bwin_threshold=5, alert_bwquota_threshold=80, linodeid=24405, totalhd=16384,
+    alert_bwin_enabled=1, alert_bwout_enabled=1>]
+    irb> l.linode.list.size
+    => 4
+    irb> l.linode.list.first
+    => #<OpenStruct datacenterid=6, lpm_displaygroup="", totalxfer=600, alert_bwquota_enabled=1, alert_diskio_enabled=1,
+    watchdog=1, alert_cpu_threshold=90, alert_bwout_threshold=5, backupsenabled=0, backupweeklyday="", status=1,
+    alert_cpu_enabled=1, label="byggvir", totalram=1080, backupwindow=0, alert_diskio_threshold=300,
+    alert_bwin_threshold=5, alert_bwquota_threshold=80, linodeid=12446, totalhd=49152, alert_bwin_enabled=1,
+    alert_bwout_enabled=1>
+    irb> l.linode.list.first.datacenterid
+    => 6
+    irb> l.linode.list.first.label
+    => "byggvir"
+
+    irb(main):003:0* l.linode.config.list
+    RuntimeError: Error completing request [linode.config.list] @ [https://api.linode.com/] with data [{}]:
+    ERRORCODE6ERRORMESSAGELINODEID is required but was not passed in
+    	from ./lib/linode.rb:45:in `send_request'
+    	from ./lib/linode.rb:13:in `list'
+    	from (irb):3
+    irb> l.linode.list
+    => [#<OpenStruct datacenterid=6, lpm_displaygroup="", totalxfer=600, alert_bwquota_enabled=1,
+    alert_diskio_enabled=1, watchdog=1, alert_cpu_threshold=90, alert_bwout_threshold=5, backupsenabled=0,
+    backupweeklyday="", status=1, alert_cpu_enabled=1, label="byggvir", totalram=1080, backupwindow=0,
+    alert_diskio_threshold=300, alert_bwin_threshold=5, alert_bwquota_threshold=80, linodeid=12446, totalhd=49152,
+    alert_bwin_enabled=1, alert_bwout_enabled=1>, #<OpenStruct datacenterid=4, lpm_displaygroup="", totalxfer=200,
+    alert_bwquota_enabled=1, alert_diskio_enabled=1, watchdog=1, alert_cpu_threshold=90, alert_bwout_threshold=5,
+    backupsenabled=0, backupweeklyday="", status=1, alert_cpu_enabled=1, label="bragi", totalram=360, backupwindow=0,
+    alert_diskio_threshold=300, alert_bwin_threshold=5, alert_bwquota_threshold=80, linodeid=15418, totalhd=16384,
+    alert_bwin_enabled=1, alert_bwout_enabled=1>, #<OpenStruct datacenterid=2, lpm_displaygroup="", totalxfer=200,
+    alert_bwquota_enabled=1, alert_diskio_enabled=1, watchdog=1, alert_cpu_threshold=90, alert_bwout_threshold=5,
+    backupsenabled=0, backupweeklyday="", status=1, alert_cpu_enabled=1, label="nerthus", totalram=360, backupwindow=0,
+    alert_diskio_threshold=300, alert_bwin_threshold=5, alert_bwquota_threshold=80, linodeid=15419, totalhd=16384,
+    alert_bwin_enabled=1, alert_bwout_enabled=1>, #<OpenStruct datacenterid=3, lpm_displaygroup="", totalxfer=200,
+    alert_bwquota_enabled=1, alert_diskio_enabled=1, watchdog=1, alert_cpu_threshold=90, alert_bwout_threshold=5,
+    backupsenabled=0, backupweeklyday=0, status=1, alert_cpu_enabled=1, label="hoenir", totalram=360, backupwindow=0,
+    alert_diskio_threshold=500, alert_bwin_threshold=5, alert_bwquota_threshold=80, linodeid=24405, totalhd=16384,
+    alert_bwin_enabled=1, alert_bwout_enabled=1>]
+    irb> l.linode.list.first
+    => #<OpenStruct datacenterid=6, lpm_displaygroup="", totalxfer=600, alert_bwquota_enabled=1, alert_diskio_enabled=1,
+    watchdog=1, alert_cpu_threshold=90, alert_bwout_threshold=5, backupsenabled=0, backupweeklyday="", status=1,
+    alert_cpu_enabled=1, label="byggvir", totalram=1080, backupwindow=0, alert_diskio_threshold=300,
+    alert_bwin_threshold=5, alert_bwquota_threshold=80, linodeid=12446, totalhd=49152, alert_bwin_enabled=1,
+    alert_bwout_enabled=1>
+    irb> l.linode.list.first.linodeid
+    => 12446
+    irb> l.linode.config.list(:LinodeId => 12446)
+    => [#<OpenStruct helper_disableupdatedb=1, ramlimit=0, kernelid=60, helper_depmod=1, rootdevicecustom="",
+    disklist="79850,79851,79854,,,,,,", label="byggvir", runlevel="default", rootdevicero=true, configid=43615,
+    rootdevicenum=1, linodeid=12446, helper_libtls=false, helper_xen=1, comments="">]
+    irb> l.linode.config.list(:LinodeId => 12446).first.disklist
+    => "79850,79851,79854,,,,,,"
+
+    irb> l.linode.job.list
+    RuntimeError: Error completing request [linode.job.list] @ [https://api.linode.com/] with data [{}]:
+    ERRORCODE6ERRORMESSAGELINODEID is required but was not passed in
+    	from ./lib/linode.rb:45:in `send_request'
+    	from ./lib/linode.rb:13:in `list'
+    	from (irb):7
+
+    irb> l.linode.job.list(:LinodeId => 12446)
+    => [#<OpenStruct action="linode.boot", jobid=1241724, duration=8, host_finish_dt="2009-07-14 17:07:29.0",
+    host_message="", linodeid=12446, host_success=1, host_start_dt="2009-07-14 17:07:21.0",
+    entered_dt="2009-07-14 17:06:25.0", label="System Boot - byggvir">, #<OpenStruct action="linode.shutdown",
+    jobid=1241723, duration=14, host_finish_dt="2009-07-14 17:07:20.0", host_message="", linodeid=12446, host_success=1,
+    host_start_dt="2009-07-14 17:07:06.0", entered_dt="2009-07-14 17:06:25.0", label="System Shutdown">,
+    #<OpenStruct action="linode.boot", jobid=1182441, duration=0, host_finish_dt="2009-06-10 04:27:49.0",
+    host_message="Linode already running", linodeid=12446, host_success=0, host_start_dt="2009-06-10 04:27:49.0",
+    entered_dt="2009-06-10 04:26:05.0", label="Lassie initiated boot">, #<OpenStruct action="linode.boot",
+    jobid=1182436, duration=8, host_finish_dt="2009-06-10 04:27:49.0", host_message="", linodeid=12446, host_success=1,
+    host_start_dt="2009-06-10 04:27:41.0", entered_dt="1974-01-04 00:00:00.0", label="Host initiated restart">,
+    #<OpenStruct action="linode.boot", jobid=1182273, duration=0, host_finish_dt="2009-06-10 03:02:31.0",
+    host_message="Linode already running", linodeid=12446, host_success=0, host_start_dt="2009-06-10 03:02:31.0",
+    entered_dt="2009-06-10 02:59:49.0", label="Lassie initiated boot">, #<OpenStruct action="linode.boot",
+    jobid=1182268, duration=8, host_finish_dt="2009-06-10 03:02:31.0", host_message="", linodeid=12446, host_success=1,
+    host_start_dt="2009-06-10 03:02:23.0", entered_dt="1974-01-04 00:00:00.0", label="Host initiated restart">,
+    #<OpenStruct action="linode.boot", jobid=1182150, duration=1, host_finish_dt="2009-06-10 01:28:40.0",
+    host_message="Linode already running", linodeid=12446, host_success=0, host_start_dt="2009-06-10 01:28:39.0",
+    entered_dt="2009-06-10 01:26:55.0", label="Lassie initiated boot">, #<OpenStruct action="linode.boot",
+    jobid=1182145, duration=8, host_finish_dt="2009-06-10 01:28:39.0", host_message="", linodeid=12446, host_success=1,
+    host_start_dt="2009-06-10 01:28:31.0", entered_dt="1974-01-04 00:00:00.0", label="Host initiated restart">]
+    irb> l.linode.job.list(:LinodeId => 12446).size
+    => 8
+
+    irb> l.linode.ip.list
+    RuntimeError: Error completing request [linode.ip.list] @ [https://api.linode.com/] with data [{}]:
+    ERRORCODE6ERRORMESSAGELINODEID is required but was not passed in
+    	from ./lib/linode.rb:45:in `send_request'
+    	from ./lib/linode.rb:13:in `list'
+    	from (irb):10
+    irb> l.linode.ip.list(:LinodeId => 12446)
+    => [#<OpenStruct rdns_name="byggvir.websages.com", ipaddressid=12286, linodeid=12446, ispublic=1,
+    ipaddress="209.123.234.161">, #<OpenStruct rdns_name="li101-51.members.linode.com", ipaddressid=23981,
+    linodeid=12446, ispublic=1, ipaddress="97.107.140.51">]
+    irb> ^D@ Wed Aug 05 01:50:52 rick@Yer-Moms-Computer
+
+## CREDITS:
+
+* Thanks to Aditya Sanghi ([asanghi](http://github.com/asanghi)) for a patch to properly namespace stackscripts functionality.
+* Thanks to Dan Hodos ([danhodos](http://github.com/danhodos)) for diagnosing and fixing an issue with sending GET requests instead of POST request.
+* Thanks to Aaron Hamid for updates for RSpec 2 and work on user.getapikey + username/password initialization.
+* Thanks to Musfuut ([musfuut](http://github.com/musfuut)) for diagnosing and recommending a fix for OpenStruct and 'type' data members in Linode returned results.
+* Thanks to mihaibirsan ([mihaibirsan](http://github.com/mihaibirsan)) for diagnosing a problem with dependencies on the 'crack' library.
+* Thanks to Adam Durana ([durana](http://github.com/durana)) for adding support for linode.ip.addprivate.
+* Thanks to Gustavo Beathyate ([goddamnhippie](http://github/goddamnhippie)) for markdownifying the README.

data/Rakefile

@@ -1,7 +1,12 @@
 require 'rubygems'
 require 'rake'
 require 'rake/testtask'
-require 'rake/rdoctask'
+
+begin
+  require 'rdoc/task'
+rescue LoadError
+  require 'rake/rdoctask'
+end
 require 'rspec/core/rake_task'
 
 desc 'Default: run specs.'
@@ -27,7 +32,7 @@ begin
     gemspec.add_dependency('httparty', '>= 0.4.4')
     gemspec.add_dependency('crack', '>= 0.3.1')
   end
-  Jeweler::GemcutterTasks.new  
+  Jeweler::GemcutterTasks.new
 rescue LoadError
 end
 

data/VERSION

@@ -1 +1 @@
-0.7.7
+0.7.8

data/lib/linode.rb

@@ -4,9 +4,14 @@ require 'ostruct_tweak'
 require 'httparty'
 require 'crack'
 
+begin
+  YAML::ENGINE.yamler = 'syck'
+rescue # see: https://github.com/rick/linode/issues/12
+end
+
 class Linode
   attr_reader :username, :password
-  
+
   def self.has_method(*actions)
     actions.each do |action|
       define_method(action.to_sym) do |*data|
@@ -16,7 +21,7 @@ class Linode
       end
     end
   end
-  
+
   def self.has_namespace(*namespaces)
     namespaces.each do |namespace|
       define_method(namespace.to_sym) do ||
@@ -28,35 +33,35 @@ class Linode
       end
     end
   end
-  
+
   has_namespace :test, :avail, :user, :domain, :linode, :nodebalancer, :stackscript
-  
+
   @@documentation_category = {}
-  
+
   def self.documentation_category(category)
     @@documentation_category[class_to_path(name)] = category
   end
-  
+
   def documentation_categories
     @@documentation_category
   end
-  
+
   def self.action_path(class_name, action)
     Linode.class_to_path(class_name) + ".#{action}"
   end
-  
+
   def self.class_to_path(class_name)
     class_name.downcase.sub(/^linode::/, '').gsub(/::/, '.')
   end
-  
+
   def documentation_path(action)
      hits = action.match(/^(.*)\.[^.]+$/)
     "http://www.linode.com/api/" + @@documentation_category[hits[1]] + '/' + action
   end
-  
+
   def initialize(args)
     @api_url = args[:api_url] if args[:api_url]
-    
+
     if args.include?(:api_key)
       @api_key = args[:api_key]
     elsif args.include?(:username) and args.include?(:password)
@@ -66,7 +71,7 @@ class Linode
       raise ArgumentError, "Either :api_key, or both :username and :password, are required."
     end
   end
-    
+
   def api_url
     @api_url || 'https://api.linode.com/'
   end
@@ -74,46 +79,46 @@ class Linode
   def api_key
     @api_key ||= fetch_api_key
   end
-  
+
   def send_request(action, data)
     data.delete_if {|k,v| [:api_key, :api_action, :api_responseFormat].include?(k) }
     response = post({ :api_key => api_key, :api_action => action, :api_responseFormat => 'json' }.merge(data))
     raise "Errors completing request [#{action}] @ [#{api_url}] with data [#{data.inspect}]:\n#{error_message(response, action)}" if error?(response)
     reformat_response(response)
   end
- 
+
   protected
-  
+
   def fetch_api_key
     response = post(:api_action => 'user.getapikey', :api_responseFormat => 'json', :username => username, :password => password)
     raise "Errors completing request [user.getapikey] @ [#{api_url}] for username [#{username}]:\n#{error_message(response, 'user.getapikey')}" if error?(response)
     reformat_response(response).api_key
   end
-  
+
   def post(data)
     Crack::JSON.parse(HTTParty.post(api_url, :body => data))
   end
-  
+
   def error?(response)
     response and response["ERRORARRAY"] and ! response["ERRORARRAY"].empty?
   end
-  
+
   def error_message(response, action)
     response["ERRORARRAY"].collect { |err|
       "  - Error \##{err["ERRORCODE"]} - #{err["ERRORMESSAGE"]}.  "+
       "(Please consult #{documentation_path(action)})"
     }.join("\n")
   end
-  
+
   def reformat_response(response)
     result = response['DATA']
     return result.collect {|item| convert_item(item) } if result.class == Array
     return result unless result.respond_to?(:keys)
     convert_item(result)
   end
-  
+
   def convert_item(item)
-    item.keys.each do |k| 
+    item.keys.each do |k|
       item[k.downcase] = item[k]
       item.delete(k) if k != k.downcase
     end

data/linode.gemspec

@@ -5,15 +5,15 @@
 
 Gem::Specification.new do |s|
   s.name = "linode"
-  s.version = "0.7.7"
+  s.version = "0.7.8"
 
   s.required_rubygems_version = Gem::Requirement.new(">= 0") if s.respond_to? :required_rubygems_version=
   s.authors = ["Rick Bradley"]
-  s.date = "2011-10-17"
+  s.date = "2012-04-26"
   s.description = "This is a wrapper around Linode's automation facilities."
   s.email = "rick@rickbradley.com"
   s.extra_rdoc_files = [
-    "README"
+    "README.md"
   ]
   s.files = [
     ".rspec",
@@ -21,7 +21,7 @@ Gem::Specification.new do |s|
     "Gemfile",
     "Gemfile.lock",
     "MIT-LICENSE",
-    "README",
+    "README.md",
     "Rakefile",
     "VERSION",
     "autotest/discover.rb",
@@ -61,7 +61,7 @@ Gem::Specification.new do |s|
   ]
   s.homepage = "http://github.com/rick/linode"
   s.require_paths = ["lib"]
-  s.rubygems_version = "1.8.10"
+  s.rubygems_version = "1.8.11"
   s.summary = "a Ruby wrapper for the Linode API"
 
   if s.respond_to? :specification_version then

data/spec/linode_spec.rb

@@ -6,28 +6,28 @@ describe Linode do
     it 'should be able to create a new Linode instance' do
       Linode.should respond_to(:new)
     end
-  
+
     describe 'when creating a new Linode instance' do
       it 'should accept an arguments hash' do
         lambda { Linode.new(:api_key => 'foo') }.should_not raise_error(ArgumentError)
       end
-      
+
       it 'should require an arguments hash' do
         lambda { Linode.new }.should raise_error(ArgumentError)
       end
-      
+
       it 'should not fail if an API key is given' do
-        lambda { Linode.new({ :api_key => 'foo' }) }.should_not raise_error(ArgumentError)        
+        lambda { Linode.new({ :api_key => 'foo' }) }.should_not raise_error(ArgumentError)
       end
-      
+
       it 'should not fail if a username/password combo is given' do
-        lambda { Linode.new({ :username => 'bar', :password => 'baz' }) }.should_not raise_error(ArgumentError)        
+        lambda { Linode.new({ :username => 'bar', :password => 'baz' }) }.should_not raise_error(ArgumentError)
       end
-      
+
       it 'should fail if no API key nor username/password combo is given' do
-        lambda { Linode.new({}) }.should raise_error(ArgumentError)        
+        lambda { Linode.new({}) }.should raise_error(ArgumentError)
       end
-      
+
       it 'should return a Linode instance' do
         Linode.new(:api_key => 'foo').class.should == Linode
       end
@@ -35,7 +35,7 @@ describe Linode do
   end
 end
 
-describe 'Linode' do  
+describe 'Linode' do
   before :each do
     @api_key = 'foo'
     @api_url = 'https://fake.linode.com/'
@@ -43,14 +43,14 @@ describe 'Linode' do
     @password = 'baz'
     @linode = Linode.new(:api_key => @api_key, :api_url => @api_url)
   end
-  
+
   describe 'when initialized with username and password' do
     before :each do
       @linode = Linode.new(:username => @username, :password => @password, :api_url => @api_url)
     end
-    
+
     it 'should be able to return the username provided at creation time' do
-      @linode.username.should == 'bar'      
+      @linode.username.should == 'bar'
     end
 
     it 'should be able to return the password provided at creation time' do
@@ -64,18 +64,18 @@ describe 'Linode' do
 
       it 'should return the stock linode API URL if none was provided at creation time' do
         @linode = Linode.new(:username => @username, :password => @api_url)
-        @linode.api_url.should == 'https://api.linode.com/'      
+        @linode.api_url.should == 'https://api.linode.com/'
       end
     end
 
     it 'should use the user.getapikey remote call to look up the API key associated with the username/password combo specified at creation time' do
       @json = '{"ERRORARRAY":[],"DATA":{"USERNAME":"ogc","API_KEY":"blahblahblah"},"ACTION":"user.getapikey"}'
-      HTTParty.expects(:post).with(@api_url, 
-        :body => { 
-          :api_action => 'user.getapikey', 
-          :api_responseFormat => 'json', 
-          :username => @username, 
-          :password => @password 
+      HTTParty.expects(:post).with(@api_url,
+        :body => {
+          :api_action => 'user.getapikey',
+          :api_responseFormat => 'json',
+          :username => @username,
+          :password => @password
         }
       ).returns(@json)
       @linode.api_key
@@ -85,12 +85,12 @@ describe 'Linode' do
       @linode.stubs(:fetch_api_key).returns(@api_key)
       @linode.api_key.should == @api_key
     end
-    
+
     it 'should fail when looking up the API key if API key remote lookup fails' do
       @linode.stubs(:fetch_api_key).raises
       lambda { @linode.api_key }.should raise_error
     end
-    
+
     it 'should cache API key remote lookups for later use' do
       @linode.stubs(:fetch_api_key).returns(@api_key)
       @linode.api_key
@@ -98,16 +98,16 @@ describe 'Linode' do
       @linode.api_key.should == @api_key
     end
   end
-  
+
   describe 'when initialized with API key' do
     it 'should return a nil username' do
       @linode.username.should be_nil
     end
-    
+
     it 'should return a nil password' do
       @linode.password.should be_nil
     end
-    
+
     it 'should be able to return the API key provided at creation time' do
       @linode.api_key.should == 'foo'
     end
@@ -120,34 +120,34 @@ describe 'Linode' do
 
       it 'should return the stock linode API URL if none was provided at creation time' do
         @linode = Linode.new(:api_key => @api_key)
-        @linode.api_url.should == 'https://api.linode.com/'      
+        @linode.api_url.should == 'https://api.linode.com/'
       end
     end
   end
-  
+
   it 'should be able to submit a request via the API' do
     @linode.should respond_to(:send_request)
   end
-  
+
   describe 'when submitting a request via the API' do
     before :each do
       @json = %Q!{
-      		"ERRORARRAY":[],
-      		"ACTION":"test.echo",
-      		"DATA":{"FOO":"bar"}
-      	}!
+          "ERRORARRAY":[],
+          "ACTION":"test.echo",
+          "DATA":{"FOO":"bar"}
+        }!
       HTTParty.stubs(:post).returns(@json)
       @linode.stubs(:api_url).returns('https://fake.linode.com/')
     end
-    
+
     it 'should allow a request name and a data hash' do
       lambda { @linode.send_request('test.echo', {}) }.should_not raise_error(ArgumentError)
     end
-    
+
     it 'should require a request name and a data hash' do
-      lambda { @linode.send_request('test.echo') }.should raise_error(ArgumentError)      
+      lambda { @linode.send_request('test.echo') }.should raise_error(ArgumentError)
     end
-    
+
     it 'should make a request to the API url' do
       @linode.stubs(:api_url).returns('https://fake.linode.com/')
       HTTParty.expects(:post).with { |path, args|
@@ -155,134 +155,143 @@ describe 'Linode' do
       }.returns(@json)
       @linode.send_request('test.echo', { })
     end
-    
+
     it 'should provide the API key when making its request' do
       HTTParty.expects(:post).with { |path, args|
         args[:body][:api_key] == @api_key
       }.returns(@json)
-      @linode.send_request('test.echo', { })      
+      @linode.send_request('test.echo', { })
     end
-    
+
     it 'should set the designated request method as the HTTP API action' do
       HTTParty.expects(:post).with { |path, args|
         args[:body][:api_action] == 'test.echo'
       }.returns(@json)
-      @linode.send_request('test.echo', { })            
+      @linode.send_request('test.echo', { })
     end
-    
+
     it 'should set the response format to JSON' do
       HTTParty.expects(:post).with { |path, args|
         args[:body][:api_responseFormat] == 'json'
       }.returns(@json)
-      @linode.send_request('test.echo', { })      
+      @linode.send_request('test.echo', { })
     end
-    
+
     it 'should provide the data hash to the HTTP API request' do
       HTTParty.expects(:post).with { |path, args|
         args[:body]['foo'] == 'bar'
       }.returns(@json)
-      @linode.send_request('test.echo', { 'foo' => 'bar' })                  
+      @linode.send_request('test.echo', { 'foo' => 'bar' })
     end
-    
+
     it 'should not allow overriding the API key via the data hash' do
       HTTParty.expects(:post).with { |path, args|
         args[:body][:api_key] == @api_key
       }.returns(@json)
-      @linode.send_request('test.echo', { :api_key => 'h4x0r' })                        
+      @linode.send_request('test.echo', { :api_key => 'h4x0r' })
     end
-    
+
     it 'should not allow overriding the API action via the data hash' do
       HTTParty.expects(:post).with { |path, args|
         args[:body][:api_action] == 'test.echo'
       }.returns(@json)
       @linode.send_request('test.echo', { :api_action => 'h4x0r' })
     end
-    
+
     it 'should not allow overriding the API response format via the data hash' do
       HTTParty.expects(:post).with { |path, args|
         args[:body][:api_responseFormat] == 'json'
       }.returns(@json)
       @linode.send_request('test.echo', { :api_responseFormat => 'h4x0r' })
     end
-    
+
     it 'should fail when the request submission fails' do
       HTTParty.stubs(:post).returns(%Q!{
-      		"ERRORARRAY":["failure"],
-      		"ACTION":"test.echo",
-      		"DATA":{"foo":"bar"}
+          "ERRORARRAY":["failure"],
+          "ACTION":"test.echo",
+          "DATA":{"foo":"bar"}
       }!)
       lambda { @linode.send_request('test.echo', { :api_action => 'failure' }) }.should raise_error
     end
-    
+
     describe 'when the result is a list of hashes' do
       it 'should return a list of objects with lower-cased methods for the data fields' do
         HTTParty.stubs(:post).returns(%Q!{
-        		"ERRORARRAY":[],
-        		"ACTION":"test.echo",
-        		"DATA":[{"FOO":"bar"},{"BAR":"baz"}]
+            "ERRORARRAY":[],
+            "ACTION":"test.echo",
+            "DATA":[{"FOO":"bar"},{"BAR":"baz"}]
         }!)
         @linode.send_request('test.echo', {}).first.foo.should == 'bar'
         @linode.send_request('test.echo', {}).last.bar.should == 'baz'
       end
-      
+
       it 'should return a list of objects which do not respond to upper-case URLs for the data fields' do
         HTTParty.stubs(:post).returns(%Q!{
-        		"ERRORARRAY":[],
-        		"ACTION":"test.echo",
-        		"DATA":[{"FOO":"bar"},{"BAR":"baz"}]
+            "ERRORARRAY":[],
+            "ACTION":"test.echo",
+            "DATA":[{"FOO":"bar"},{"BAR":"baz"}]
         }!)
         @linode.send_request('test.echo', {}).first.should_not respond_to(:FOO)
         @linode.send_request('test.echo', {}).last.should_not respond_to(:BAR)
       end
     end
-    
+
     describe 'when the result is a hash' do
       it 'should return an object with lower-cased methods for the data fields' do
         @linode.send_request('test.echo', {}).foo.should == 'bar'
       end
-    
+
       it 'should return an object which does not respond to upper-case URLs for the data fields' do
         @linode.send_request('test.echo', {}).should_not respond_to(:FOO)
       end
     end
-    
+
     describe 'when the result is neither a list nor a hash' do
       it 'should return the result unchanged' do
         HTTParty.stubs(:post).returns(%Q!{
-        		"ERRORARRAY":[],
-        		"ACTION":"test.echo",
-        		"DATA":"thingie"
+            "ERRORARRAY":[],
+            "ACTION":"test.echo",
+            "DATA":"thingie"
         }!)
         @linode.send_request('test.echo', {}).should == "thingie"
       end
     end
+
+    it 'should be able to parse real JSON when processing a request' do
+      json = '{"ERRORARRAY":[],"DATA":[{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":90,"IS64BIT":0,"LABEL":"Arch Linux 2011.08","MINIMAGESIZE":500,"CREATE_DT":"2011-09-26 17:18:05.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":91,"IS64BIT":1,"LABEL":"Arch Linux 2011.08 64bit","MINIMAGESIZE":500,"CREATE_DT":"2011-09-26 17:18:05.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":88,"IS64BIT":0,"LABEL":"CentOS 6.2","MINIMAGESIZE":800,"CREATE_DT":"2011-07-19 11:38:20.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":89,"IS64BIT":1,"LABEL":"CentOS 6.2 64bit","MINIMAGESIZE":800,"CREATE_DT":"2011-07-19 11:38:20.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":77,"IS64BIT":0,"LABEL":"Debian 6","MINIMAGESIZE":550,"CREATE_DT":"2011-02-08 16:54:31.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":78,"IS64BIT":1,"LABEL":"Debian 6 64bit","MINIMAGESIZE":550,"CREATE_DT":"2011-02-08 16:54:31.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":94,"IS64BIT":0,"LABEL":"Fedora 16","MINIMAGESIZE":1000,"CREATE_DT":"2012-04-09 14:12:04.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":95,"IS64BIT":1,"LABEL":"Fedora 16 64bit","MINIMAGESIZE":1000,"CREATE_DT":"2012-04-09 14:12:32.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":72,"IS64BIT":0,"LABEL":"Gentoo","MINIMAGESIZE":1000,"CREATE_DT":"2010-09-13 00:00:00.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":53,"IS64BIT":1,"LABEL":"Gentoo 64bit","MINIMAGESIZE":1000,"CREATE_DT":"2009-04-04 00:00:00.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":96,"IS64BIT":0,"LABEL":"openSUSE 12.1","MINIMAGESIZE":1000,"CREATE_DT":"2012-04-13 11:43:30.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":97,"IS64BIT":1,"LABEL":"openSUSE 12.1 64bit","MINIMAGESIZE":1000,"CREATE_DT":"2012-04-13 11:43:30.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":86,"IS64BIT":0,"LABEL":"Slackware 13.37","MINIMAGESIZE":600,"CREATE_DT":"2011-06-05 15:11:59.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":87,"IS64BIT":1,"LABEL":"Slackware 13.37 64bit","MINIMAGESIZE":600,"CREATE_DT":"2011-06-05 15:11:59.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":64,"IS64BIT":0,"LABEL":"Ubuntu 10.04 LTS","MINIMAGESIZE":450,"CREATE_DT":"2010-04-29 00:00:00.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":65,"IS64BIT":1,"LABEL":"Ubuntu 10.04 LTS 64bit","MINIMAGESIZE":450,"CREATE_DT":"2010-04-29 00:00:00.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":92,"IS64BIT":0,"LABEL":"Ubuntu 11.10","MINIMAGESIZE":750,"CREATE_DT":"2011-10-14 14:29:42.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":93,"IS64BIT":1,"LABEL":"Ubuntu 11.10 64bit","MINIMAGESIZE":850,"CREATE_DT":"2011-10-14 14:29:42.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":59,"IS64BIT":0,"LABEL":"CentOS 5.6","MINIMAGESIZE":950,"CREATE_DT":"2009-08-17 00:00:00.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":60,"IS64BIT":1,"LABEL":"CentOS 5.6 64bit","MINIMAGESIZE":950,"CREATE_DT":"2009-08-17 00:00:00.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":50,"IS64BIT":0,"LABEL":"Debian 5.0","MINIMAGESIZE":350,"CREATE_DT":"2009-02-19 00:00:00.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":51,"IS64BIT":1,"LABEL":"Debian 5.0 64bit","MINIMAGESIZE":350,"CREATE_DT":"2009-02-19 00:00:00.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":84,"IS64BIT":0,"LABEL":"Fedora 15","MINIMAGESIZE":900,"CREATE_DT":"2011-05-25 18:57:36.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":85,"IS64BIT":1,"LABEL":"Fedora 15 64bit","MINIMAGESIZE":900,"CREATE_DT":"2011-05-25 18:58:07.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":79,"IS64BIT":0,"LABEL":"openSUSE 11.4","MINIMAGESIZE":650,"CREATE_DT":"2011-03-10 11:36:46.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":80,"IS64BIT":1,"LABEL":"openSUSE 11.4 64bit","MINIMAGESIZE":650,"CREATE_DT":"2011-03-10 11:36:46.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":68,"IS64BIT":0,"LABEL":"Slackware 13.1","MINIMAGESIZE":512,"CREATE_DT":"2010-05-10 00:00:00.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":69,"IS64BIT":1,"LABEL":"Slackware 13.1 64bit","MINIMAGESIZE":512,"CREATE_DT":"2010-05-10 00:00:00.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":73,"IS64BIT":0,"LABEL":"Ubuntu 10.10","MINIMAGESIZE":500,"CREATE_DT":"2010-10-11 15:19:00.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":74,"IS64BIT":1,"LABEL":"Ubuntu 10.10 64bit","MINIMAGESIZE":500,"CREATE_DT":"2010-10-11 15:19:00.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":82,"IS64BIT":0,"LABEL":"Ubuntu 11.04","MINIMAGESIZE":500,"CREATE_DT":"2011-04-28 16:28:48.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":83,"IS64BIT":1,"LABEL":"Ubuntu 11.04 64bit","MINIMAGESIZE":500,"CREATE_DT":"2011-04-28 16:28:48.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":41,"IS64BIT":0,"LABEL":"Ubuntu 8.04 LTS","MINIMAGESIZE":350,"CREATE_DT":"2008-04-23 15:11:29.0"},{"REQUIRESPVOPSKERNEL":1,"DISTRIBUTIONID":42,"IS64BIT":1,"LABEL":"Ubuntu 8.04 LTS 64bit","MINIMAGESIZE":350,"CREATE_DT":"2008-06-03 12:51:11.0"}],"ACTION":"avail.distributions"}'
+      HTTParty.stubs(:post).returns(json)
+      @linode.stubs(:api_url).returns('https://fake.linode.com/')
+
+      lambda { @linode.send_request('test.echo', {}) }.should_not raise_error
+    end
   end
-  
+
+
   it 'should be able to provide access to the Linode Test API' do
     @linode.should respond_to(:test)
   end
-  
+
   describe 'when providing access to the Linode Test API' do
     it 'should allow no arguments' do
       lambda { @linode.test }.should_not raise_error(ArgumentError)
     end
-    
+
     it 'should require no arguments' do
       lambda { @linode.test(:foo) }.should raise_error(ArgumentError)
     end
-    
+
     it 'should return a Linode::Test instance' do
       @linode.test.class.should == Linode::Test
     end
-    
+
     it 'should set the API key on the Linode::Test instance to be our API key' do
       @linode.test.api_key.should == @api_key
     end
-    
+
     it 'should set the API URL on the Linode::Test instance to be our API URL' do
       @linode.test.api_url.should == @api_url
     end
-    
+
     it 'should return the same Linode::Test instance when called again' do
       linode = Linode.new(:api_key => @api_key)
       result = linode.test
@@ -293,60 +302,60 @@ describe 'Linode' do
   it 'should be able to provide access to the Linode Avail API' do
     @linode.should respond_to(:avail)
   end
-  
+
   describe 'when providing access to the Linode Avail API' do
     it 'should allow no arguments' do
       lambda { @linode.avail }.should_not raise_error(ArgumentError)
     end
-    
+
     it 'should require no arguments' do
       lambda { @linode.avail(:foo) }.should raise_error(ArgumentError)
     end
-    
+
     it 'should return a Linode::Avail instance' do
       @linode.avail.class.should == Linode::Avail
     end
-    
+
     it 'should set the API key on the Linode::Avail instance to be our API key' do
       @linode.avail.api_key.should == @api_key
     end
-    
+
     it 'should set the API url on the Linode::Avail instance to be our API url' do
       @linode.avail.api_url.should == @api_url
     end
-    
+
     it 'should return the same Linode::Avail instance when called again' do
       linode = Linode.new(:api_key => @api_key)
       result = linode.avail
       linode.avail.should == result
     end
   end
-  
+
   it 'should be able to provide access to the Linode User API' do
     @linode.should respond_to(:user)
   end
-  
+
   describe 'when providing access to the Linode User API' do
     it 'should allow no arguments' do
       lambda { @linode.user }.should_not raise_error(ArgumentError)
     end
-    
+
     it 'should require no arguments' do
       lambda { @linode.user(:foo) }.should raise_error(ArgumentError)
     end
-    
+
     it 'should return a Linode::User instance' do
       @linode.user.class.should == Linode::User
     end
-    
+
     it 'should set the API key on the Linode::User instance to be our API key' do
       @linode.user.api_key.should == @api_key
     end
-    
+
     it 'should set the API url on the Linode::User instance to be our API url' do
       @linode.user.api_url.should == @api_url
     end
-    
+
     it 'should return the same Linode::User instance when called again' do
       linode = Linode.new(:api_key => @api_key)
       result = linode.user
@@ -357,60 +366,60 @@ describe 'Linode' do
   it 'should be able to provide access to the Linode Domain API' do
     @linode.should respond_to(:domain)
   end
-  
+
   describe 'when providing access to the Linode Domain API' do
     it 'should allow no arguments' do
       lambda { @linode.domain }.should_not raise_error(ArgumentError)
     end
-    
+
     it 'should require no arguments' do
       lambda { @linode.domain(:foo) }.should raise_error(ArgumentError)
     end
-    
+
     it 'should return a Linode::Domain instance' do
       @linode.domain.class.should == Linode::Domain
     end
-    
+
     it 'should set the API key on the Linode::Domain instance to be our API key' do
       @linode.domain.api_key.should == @api_key
     end
-    
+
     it 'should set the API url on the Linode::Domain instance to be our API url' do
       @linode.domain.api_url.should == @api_url
     end
-    
+
     it 'should return the same Linode::Domain instance when called again' do
       linode = Linode.new(:api_key => @api_key)
       result = linode.domain
       linode.domain.should == result
     end
   end
-  
+
   it 'should be able to provide access to the Linode Linode API' do
     @linode.should respond_to(:linode)
   end
-  
+
   describe 'when providing access to the Linode Linode API' do
     it 'should allow no arguments' do
       lambda { @linode.linode }.should_not raise_error(ArgumentError)
     end
-    
+
     it 'should require no arguments' do
       lambda { @linode.linode(:foo) }.should raise_error(ArgumentError)
     end
-    
+
     it 'should return a Linode::Linode instance' do
       @linode.linode.class.should == Linode::Linode
     end
-    
+
     it 'should set the API key on the Linode::Linode instance to be our API key' do
       @linode.linode.api_key.should == @api_key
     end
-    
+
     it 'should set the API url on the Linode::Linode instance to be our API url' do
       @linode.linode.api_url.should == @api_url
     end
-    
+
     it 'should return the same Linode::Linode instance when called again' do
       linode = Linode.new(:api_key => @api_key)
       result = linode.linode
@@ -421,28 +430,28 @@ describe 'Linode' do
   it 'should be able to provide access to the Linode Nodebalancer API' do
     @linode.should respond_to(:nodebalancer)
   end
-  
+
   describe 'when providing access to the Linode Nodebalancer API' do
     it 'should allow no arguments' do
       lambda { @linode.nodebalancer }.should_not raise_error(ArgumentError)
     end
-    
+
     it 'should require no arguments' do
       lambda { @linode.nodebalancer(:foo) }.should raise_error(ArgumentError)
     end
-    
+
     it 'should return a Linode::Nodebalancer instance' do
       @linode.nodebalancer.class.should == Linode::Nodebalancer
     end
-    
+
     it 'should set the API key on the Linode::Nodebalancer instance to be our API key' do
       @linode.nodebalancer.api_key.should == @api_key
     end
-    
+
     it 'should set the API url on the Linode::Nodebalancer instance to be our API url' do
       @linode.nodebalancer.api_url.should == @api_url
     end
-    
+
     it 'should return the same Linode::Nodebalancer instance when called again' do
       linode = Linode.new(:api_key => @api_key)
       result = linode.nodebalancer

metadata

@@ -1,13 +1,13 @@
 --- !ruby/object:Gem::Specification 
 name: linode
 version: !ruby/object:Gem::Version 
-  hash: 13
+  hash: 19
   prerelease: 
   segments: 
   - 0
   - 7
-  - 7
-  version: 0.7.7
+  - 8
+  version: 0.7.8
 platform: ruby
 authors: 
 - Rick Bradley
@@ -15,7 +15,7 @@ autorequire:
 bindir: bin
 cert_chain: []
 
-date: 2011-10-17 00:00:00 Z
+date: 2012-04-26 00:00:00 Z
 dependencies: 
 - !ruby/object:Gem::Dependency 
   requirement: &id001 !ruby/object:Gem::Requirement 
@@ -84,14 +84,14 @@ executables: []
 extensions: []
 
 extra_rdoc_files: 
-- README
+- README.md
 files: 
 - .rspec
 - CHANGELOG
 - Gemfile
 - Gemfile.lock
 - MIT-LICENSE
-- README
+- README.md
 - Rakefile
 - VERSION
 - autotest/discover.rb
@@ -157,7 +157,7 @@ required_rubygems_version: !ruby/object:Gem::Requirement
 requirements: []
 
 rubyforge_project: 
-rubygems_version: 1.8.10
+rubygems_version: 1.8.11
 signing_key: 
 specification_version: 3
 summary: a Ruby wrapper for the Linode API

data/README

@@ -1,148 +0,0 @@
-Linode Ruby API
-
-INSTALLATION:
-
- Make sure gemcutter.org is in your gem sources list, then:
-
- % sudo gem install linode
-
- To run tests you will need both rspec and mocha installed.
-
-RUNNING:
-
- Consult the Linode API guide here:  http://www.linode.com/api/autodoc.cfm
- You will need to get an API key (check your account profile).
-
-Here is an annoyingly exhaustive IRB session where I play around with the API:
-
- irb> require 'rubygems'
- irb> require 'linode'
- irb> api_key = 'TOPSECRETAPIKEY'
- irb> l = Linode.new(:api_key => api_key)
- => #<Linode:0x100e03c @api_key="TOPSECRETAPIKEY">
-
- irb> result = l.test.echo(:foo => 'bar', :baz => 'xyzzy')
- => #<OpenStruct baz="xyzzy", foo="bar">
- irb> result.foo
- => "bar"
- irb> result.baz
- => "xyzzy"
- 
- irb> result = l.avail.datacenters
- => [#<OpenStruct datacenterid=2, location="Dallas, TX, USA">, #<OpenStruct datacenterid=3, location="Fremont, CA, USA">, #<OpenStruct datacenterid=4, location="Atlanta, GA, USA">, #<OpenStruct datacenterid=6, location="Newark, NJ, USA">]
- irb> s = _
- => [#<OpenStruct datacenterid=2, location="Dallas, TX, USA">, #<OpenStruct datacenterid=3, location="Fremont, CA, USA">, #<OpenStruct datacenterid=4, location="Atlanta, GA, USA">, #<OpenStruct datacenterid=6, location="Newark, NJ, USA">]
- irb> result.first
- => #<OpenStruct datacenterid=2, location="Dallas, TX, USA">
- irb> result.first.location
- => "Dallas, TX, USA"
- irb> l.avail.datacenters.collect {|i| i.location }
- => ["Dallas, TX, USA", "Fremont, CA, USA", "Atlanta, GA, USA", "Newark, NJ, USA"]
- irb> l.avail.datacenters.collect {|i| i.datacenterid }
- => [2, 3, 4, 6]
- 
- irb> l.user.getapikey(:username => 'me', :password => 'SECKRIT')
- => #<OpenStruct api_key="TOPSECRETAPIKEY", username="me">
- irb> l.user.getapikey(:username => 'me', :password => 'SECKRIT').api_key
- => "TOPSECRETAPIKEY"
- irb> l.user.getapikey(:username => 'me', :password => 'SECKRIT').username
- => "me"
- 
- irb> l.avail.kernels
- => [#<OpenStruct isxen=1, label="2.6.16.38-x86_64-linode2", kernelid=85>, #<OpenStruct isxen=1, label="2.6.18.8-domU-linode7", kernelid=81>, #<OpenStruct isxen=1, label="2.6.18.8-linode10", kernelid=89>, #<OpenStruct isxen=1, label="2.6.18.8-linode16", kernelid=98>, #<OpenStruct isxen=1, label="2.6.18.8-x86_64-linode1", kernelid=86>, #<OpenStruct isxen=1, label="2.6.24.4-linode8", kernelid=84>, #<OpenStruct isxen=1, label="2.6.25-linode9", kernelid=88>, #<OpenStruct isxen=1, label="2.6.25.10-linode12", kernelid=90>, #<OpenStruct isxen=1, label="2.6.26-linode13", kernelid=91>, #<OpenStruct isxen=1, label="2.6.27.4-linode14", kernelid=93>, #<OpenStruct isxen=1, label="2.6.27.4-x86_64-linode3", kernelid=94>, #<OpenStruct isxen=1, label="2.6.28-linode15", kernelid=96>, #<OpenStruct isxen=1, label="2.6.28-x86_64-linode4", kernelid=97>, #<OpenStruct isxen=1, label="2.6.28.3-linode17", kernelid=99>, #<OpenStruct isxen=1, label="2.6.28.3-x86_64-linode5", kernelid=100>, #<OpenStruct isxen=1, label="2.6.29-linode18", kernelid=101>, #<OpenStruct isxen=1, label="2.6.29-x86_64-linode6", kernelid=102>, #<OpenStruct isxen=1, label="Latest 2.6 Series (2.6.18.8-linode16)", kernelid=60>, #<OpenStruct isxen=1, label="pv-grub-x86_32", kernelid=92>, #<OpenStruct isxen=1, label="pv-grub-x86_64", kernelid=95>, #<OpenStruct isxen=1, label="Recovery - Finnix (kernel)", kernelid=61>]
- irb> l.avail.kernels.size
- => 21
- irb> l.avail.kernels.first
- => #<OpenStruct isxen=1, label="2.6.16.38-x86_64-linode2", kernelid=85>
- irb> l.avail.kernels.first.label
- => "2.6.16.38-x86_64-linode2"
- 
- irb> l.avail.linodeplans
- => [#<OpenStruct ram=360, label="Linode 360", avail={"6"=>26, "2"=>57, "3"=>20, "4"=>39}, price=19.95, planid=1, xfer=200, disk=16>, #<OpenStruct ram=540, label="Linode 540", avail={"6"=>11, "2"=>38, "3"=>14, "4"=>28}, price=29.95, planid=2, xfer=300, disk=24>, #<OpenStruct ram=720, label="Linode 720", avail={"6"=>13, "2"=>27, "3"=>18, "4"=>30}, price=39.95, planid=3, xfer=400, disk=32>, #<OpenStruct ram=1080, label="Linode 1080", avail={"6"=>18, "2"=>7, "3"=>9, "4"=>4}, price=59.95, planid=4, xfer=600, disk=48>, #<OpenStruct ram=1440, label="Linode 1440", avail={"6"=>14, "2"=>5, "3"=>7, "4"=>3}, price=79.95, planid=5, xfer=800, disk=64>, #<OpenStruct ram=2880, label="Linode 2880", avail={"6"=>3, "2"=>3, "3"=>3, "4"=>3}, price=159.95, planid=6, xfer=1600, disk=128>, #<OpenStruct ram=5760, label="Linode 5760", avail={"6"=>5, "2"=>6, "3"=>5, "4"=>5}, price=319.95, planid=7, xfer=2000, disk=256>, #<OpenStruct ram=8640, label="Linode 8640", avail={"6"=>5, "2"=>6, "3"=>5, "4"=>5}, price=479.95, planid=8, xfer=2000, disk=384>, #<OpenStruct ram=11520, label="Linode 11520", avail={"6"=>5, "2"=>6, "3"=>5, "4"=>5}, price=639.95, planid=9, xfer=2000, disk=512>, #<OpenStruct ram=14400, label="Linode 14400", avail={"6"=>5, "2"=>6, "3"=>5, "4"=>5}, price=799.95, planid=10, xfer=2000, disk=640>]
- irb> l.avail.linodeplans.size
- => 10
- irb> l.avail.linodeplans.first
- => #<OpenStruct ram=360, label="Linode 360", avail={"6"=>26, "2"=>57, "3"=>20, "4"=>39}, price=19.95, planid=1, xfer=200, disk=16>
- irb> l.avail.linodeplans.first.avail
- => {"6"=>26, "2"=>57, "3"=>20, "4"=>39}
- 
- irb> l.avail.distributions
- => [#<OpenStruct label="Arch Linux 2007.08", minimagesize=436, create_dt="2007-10-24 00:00:00.0", is64bit=0, distributionid=38>, #<OpenStruct label="Centos 5.0", minimagesize=594, create_dt="2007-04-27 00:00:00.0", is64bit=0, distributionid=32>, #<OpenStruct label="Centos 5.2", minimagesize=950, create_dt="2008-11-30 00:00:00.0", is64bit=0, distributionid=46>, #<OpenStruct label="Centos 5.2 64bit", minimagesize=980, create_dt="2008-11-30 00:00:00.0", is64bit=1, distributionid=47>, #<OpenStruct label="Debian 4.0", minimagesize=200, create_dt="2007-04-18 00:00:00.0", is64bit=0, distributionid=28>, #<OpenStruct label="Debian 4.0 64bit", minimagesize=220, create_dt="2008-12-02 00:00:00.0", is64bit=1, distributionid=48>, #<OpenStruct label="Debian 5.0", minimagesize=200, create_dt="2009-02-19 00:00:00.0", is64bit=0, distributionid=50>, #<OpenStruct label="Debian 5.0 64bit", minimagesize=300, create_dt="2009-02-19 00:00:00.0", is64bit=1, distributionid=51>, #<OpenStruct label="Fedora 8", minimagesize=740, create_dt="2007-11-09 00:00:00.0", is64bit=0, distributionid=40>, #<OpenStruct label="Fedora 9", minimagesize=1175, create_dt="2008-06-09 15:15:21.0", is64bit=0, distributionid=43>, #<OpenStruct label="Gentoo 2007.0", minimagesize=1800, create_dt="2007-08-29 00:00:00.0", is64bit=0, distributionid=35>, #<OpenStruct label="Gentoo 2008.0", minimagesize=1500, create_dt="2009-03-20 00:00:00.0", is64bit=0, distributionid=52>, #<OpenStruct label="Gentoo 2008.0 64bit", minimagesize=2500, create_dt="2009-04-04 00:00:00.0", is64bit=1, distributionid=53>, #<OpenStruct label="OpenSUSE 11.0", minimagesize=850, create_dt="2008-08-21 08:32:16.0", is64bit=0, distributionid=44>, #<OpenStruct label="Slackware 12.0", minimagesize=315, create_dt="2007-07-16 00:00:00.0", is64bit=0, distributionid=34>, #<OpenStruct label="Slackware 12.2", minimagesize=500, create_dt="2009-04-04 00:00:00.0", is64bit=0, distributionid=54>, #<OpenStruct label="Ubuntu 8.04 LTS", minimagesize=400, create_dt="2008-04-23 15:11:29.0", is64bit=0, distributionid=41>, #<OpenStruct label="Ubuntu 8.04 LTS 64bit", minimagesize=350, create_dt="2008-06-03 12:51:11.0", is64bit=1, distributionid=42>, #<OpenStruct label="Ubuntu 8.10", minimagesize=220, create_dt="2008-10-30 23:23:03.0", is64bit=0, distributionid=45>, #<OpenStruct label="Ubuntu 8.10 64bit", minimagesize=230, create_dt="2008-12-02 00:00:00.0", is64bit=1, distributionid=49>, #<OpenStruct label="Ubuntu 9.04", minimagesize=350, create_dt="2009-04-23 00:00:00.0", is64bit=0, distributionid=55>, #<OpenStruct label="Ubuntu 9.04 64bit", minimagesize=350, create_dt="2009-04-23 00:00:00.0", is64bit=1, distributionid=56>]
- irb> l.avail.distributions.size
- => 22
- irb> l.avail.distributions.first
- => #<OpenStruct label="Arch Linux 2007.08", minimagesize=436, create_dt="2007-10-24 00:00:00.0", is64bit=0, distributionid=38>
- irb> l.avail.distributions.first.label
- => "Arch Linux 2007.08"
- 
- irb> l.domain.resource.list
- RuntimeError: Error completing request [domain.resource.list] @ [https://api.linode.com/] with data [{}]: ERRORCODE6ERRORMESSAGEDOMAINID is required but was not passed in
- 	from ./lib/linode.rb:31:in `send_request'
- 	from ./lib/linode.rb:13:in `list'
- 	from (irb):3
- irb> l.domain.resource.list(:DomainId => '1')
- RuntimeError: Error completing request [domain.resource.list] @ [https://api.linode.com/] with data [{:DomainId=>"1"}]: ERRORCODE5ERRORMESSAGEObject not found
- 	from ./lib/linode.rb:31:in `send_request'
- 	from ./lib/linode.rb:13:in `list'
- 	from (irb):5
- irb> l.domain.resource.list(:DomainId => '1', :ResourceId => '2')
- RuntimeError: Error completing request [domain.resource.list] @ [https://api.linode.com/] with data [{:DomainId=>"1", :ResourceId=>"2"}]: ERRORCODE5ERRORMESSAGEObject not found
- 	from ./lib/linode.rb:31:in `send_request'
- 	from ./lib/linode.rb:13:in `list'
- 	from (irb):7
- 
- irb> l.linode
- => #<Linode::Linode:0x10056e4 @api_url="https://api.linode.com/", @api_key="TOPSECRETAPIKEY">
- irb> l.linode.list
- => [#<OpenStruct datacenterid=6, lpm_displaygroup="", totalxfer=600, alert_bwquota_enabled=1, alert_diskio_enabled=1, watchdog=1, alert_cpu_threshold=90, alert_bwout_threshold=5, backupsenabled=0, backupweeklyday="", status=1, alert_cpu_enabled=1, label="byggvir", totalram=1080, backupwindow=0, alert_diskio_threshold=300, alert_bwin_threshold=5, alert_bwquota_threshold=80, linodeid=12446, totalhd=49152, alert_bwin_enabled=1, alert_bwout_enabled=1>, #<OpenStruct datacenterid=4, lpm_displaygroup="", totalxfer=200, alert_bwquota_enabled=1, alert_diskio_enabled=1, watchdog=1, alert_cpu_threshold=90, alert_bwout_threshold=5, backupsenabled=0, backupweeklyday="", status=1, alert_cpu_enabled=1, label="bragi", totalram=360, backupwindow=0, alert_diskio_threshold=300, alert_bwin_threshold=5, alert_bwquota_threshold=80, linodeid=15418, totalhd=16384, alert_bwin_enabled=1, alert_bwout_enabled=1>, #<OpenStruct datacenterid=2, lpm_displaygroup="", totalxfer=200, alert_bwquota_enabled=1, alert_diskio_enabled=1, watchdog=1, alert_cpu_threshold=90, alert_bwout_threshold=5, backupsenabled=0, backupweeklyday="", status=1, alert_cpu_enabled=1, label="nerthus", totalram=360, backupwindow=0, alert_diskio_threshold=300, alert_bwin_threshold=5, alert_bwquota_threshold=80, linodeid=15419, totalhd=16384, alert_bwin_enabled=1, alert_bwout_enabled=1>, #<OpenStruct datacenterid=3, lpm_displaygroup="", totalxfer=200, alert_bwquota_enabled=1, alert_diskio_enabled=1, watchdog=1, alert_cpu_threshold=90, alert_bwout_threshold=5, backupsenabled=0, backupweeklyday=0, status=1, alert_cpu_enabled=1, label="hoenir", totalram=360, backupwindow=0, alert_diskio_threshold=500, alert_bwin_threshold=5, alert_bwquota_threshold=80, linodeid=24405, totalhd=16384, alert_bwin_enabled=1, alert_bwout_enabled=1>]
- irb> l.linode.list.size
- => 4
- irb> l.linode.list.first
- => #<OpenStruct datacenterid=6, lpm_displaygroup="", totalxfer=600, alert_bwquota_enabled=1, alert_diskio_enabled=1, watchdog=1, alert_cpu_threshold=90, alert_bwout_threshold=5, backupsenabled=0, backupweeklyday="", status=1, alert_cpu_enabled=1, label="byggvir", totalram=1080, backupwindow=0, alert_diskio_threshold=300, alert_bwin_threshold=5, alert_bwquota_threshold=80, linodeid=12446, totalhd=49152, alert_bwin_enabled=1, alert_bwout_enabled=1>
- irb> l.linode.list.first.datacenterid
- => 6
- irb> l.linode.list.first.label
- => "byggvir"
- 
- irb(main):003:0* l.linode.config.list
- RuntimeError: Error completing request [linode.config.list] @ [https://api.linode.com/] with data [{}]: ERRORCODE6ERRORMESSAGELINODEID is required but was not passed in
- 	from ./lib/linode.rb:45:in `send_request'
- 	from ./lib/linode.rb:13:in `list'
- 	from (irb):3
- irb> l.linode.list
- => [#<OpenStruct datacenterid=6, lpm_displaygroup="", totalxfer=600, alert_bwquota_enabled=1, alert_diskio_enabled=1, watchdog=1, alert_cpu_threshold=90, alert_bwout_threshold=5, backupsenabled=0, backupweeklyday="", status=1, alert_cpu_enabled=1, label="byggvir", totalram=1080, backupwindow=0, alert_diskio_threshold=300, alert_bwin_threshold=5, alert_bwquota_threshold=80, linodeid=12446, totalhd=49152, alert_bwin_enabled=1, alert_bwout_enabled=1>, #<OpenStruct datacenterid=4, lpm_displaygroup="", totalxfer=200, alert_bwquota_enabled=1, alert_diskio_enabled=1, watchdog=1, alert_cpu_threshold=90, alert_bwout_threshold=5, backupsenabled=0, backupweeklyday="", status=1, alert_cpu_enabled=1, label="bragi", totalram=360, backupwindow=0, alert_diskio_threshold=300, alert_bwin_threshold=5, alert_bwquota_threshold=80, linodeid=15418, totalhd=16384, alert_bwin_enabled=1, alert_bwout_enabled=1>, #<OpenStruct datacenterid=2, lpm_displaygroup="", totalxfer=200, alert_bwquota_enabled=1, alert_diskio_enabled=1, watchdog=1, alert_cpu_threshold=90, alert_bwout_threshold=5, backupsenabled=0, backupweeklyday="", status=1, alert_cpu_enabled=1, label="nerthus", totalram=360, backupwindow=0, alert_diskio_threshold=300, alert_bwin_threshold=5, alert_bwquota_threshold=80, linodeid=15419, totalhd=16384, alert_bwin_enabled=1, alert_bwout_enabled=1>, #<OpenStruct datacenterid=3, lpm_displaygroup="", totalxfer=200, alert_bwquota_enabled=1, alert_diskio_enabled=1, watchdog=1, alert_cpu_threshold=90, alert_bwout_threshold=5, backupsenabled=0, backupweeklyday=0, status=1, alert_cpu_enabled=1, label="hoenir", totalram=360, backupwindow=0, alert_diskio_threshold=500, alert_bwin_threshold=5, alert_bwquota_threshold=80, linodeid=24405, totalhd=16384, alert_bwin_enabled=1, alert_bwout_enabled=1>]
- irb> l.linode.list.first
- => #<OpenStruct datacenterid=6, lpm_displaygroup="", totalxfer=600, alert_bwquota_enabled=1, alert_diskio_enabled=1, watchdog=1, alert_cpu_threshold=90, alert_bwout_threshold=5, backupsenabled=0, backupweeklyday="", status=1, alert_cpu_enabled=1, label="byggvir", totalram=1080, backupwindow=0, alert_diskio_threshold=300, alert_bwin_threshold=5, alert_bwquota_threshold=80, linodeid=12446, totalhd=49152, alert_bwin_enabled=1, alert_bwout_enabled=1>
- irb> l.linode.list.first.linodeid
- => 12446
- irb> l.linode.config.list(:LinodeId => 12446)
- => [#<OpenStruct helper_disableupdatedb=1, ramlimit=0, kernelid=60, helper_depmod=1, rootdevicecustom="", disklist="79850,79851,79854,,,,,,", label="byggvir", runlevel="default", rootdevicero=true, configid=43615, rootdevicenum=1, linodeid=12446, helper_libtls=false, helper_xen=1, comments="">]
- irb> l.linode.config.list(:LinodeId => 12446).first.disklist
- => "79850,79851,79854,,,,,,"
- 
- irb> l.linode.job.list
- RuntimeError: Error completing request [linode.job.list] @ [https://api.linode.com/] with data [{}]: ERRORCODE6ERRORMESSAGELINODEID is required but was not passed in
- 	from ./lib/linode.rb:45:in `send_request'
- 	from ./lib/linode.rb:13:in `list'
- 	from (irb):7
- irb> l.linode.job.list(:LinodeId => 12446)
- => [#<OpenStruct action="linode.boot", jobid=1241724, duration=8, host_finish_dt="2009-07-14 17:07:29.0", host_message="", linodeid=12446, host_success=1, host_start_dt="2009-07-14 17:07:21.0", entered_dt="2009-07-14 17:06:25.0", label="System Boot - byggvir">, #<OpenStruct action="linode.shutdown", jobid=1241723, duration=14, host_finish_dt="2009-07-14 17:07:20.0", host_message="", linodeid=12446, host_success=1, host_start_dt="2009-07-14 17:07:06.0", entered_dt="2009-07-14 17:06:25.0", label="System Shutdown">, #<OpenStruct action="linode.boot", jobid=1182441, duration=0, host_finish_dt="2009-06-10 04:27:49.0", host_message="Linode already running", linodeid=12446, host_success=0, host_start_dt="2009-06-10 04:27:49.0", entered_dt="2009-06-10 04:26:05.0", label="Lassie initiated boot">, #<OpenStruct action="linode.boot", jobid=1182436, duration=8, host_finish_dt="2009-06-10 04:27:49.0", host_message="", linodeid=12446, host_success=1, host_start_dt="2009-06-10 04:27:41.0", entered_dt="1974-01-04 00:00:00.0", label="Host initiated restart">, #<OpenStruct action="linode.boot", jobid=1182273, duration=0, host_finish_dt="2009-06-10 03:02:31.0", host_message="Linode already running", linodeid=12446, host_success=0, host_start_dt="2009-06-10 03:02:31.0", entered_dt="2009-06-10 02:59:49.0", label="Lassie initiated boot">, #<OpenStruct action="linode.boot", jobid=1182268, duration=8, host_finish_dt="2009-06-10 03:02:31.0", host_message="", linodeid=12446, host_success=1, host_start_dt="2009-06-10 03:02:23.0", entered_dt="1974-01-04 00:00:00.0", label="Host initiated restart">, #<OpenStruct action="linode.boot", jobid=1182150, duration=1, host_finish_dt="2009-06-10 01:28:40.0", host_message="Linode already running", linodeid=12446, host_success=0, host_start_dt="2009-06-10 01:28:39.0", entered_dt="2009-06-10 01:26:55.0", label="Lassie initiated boot">, #<OpenStruct action="linode.boot", jobid=1182145, duration=8, host_finish_dt="2009-06-10 01:28:39.0", host_message="", linodeid=12446, host_success=1, host_start_dt="2009-06-10 01:28:31.0", entered_dt="1974-01-04 00:00:00.0", label="Host initiated restart">]
- irb> l.linode.job.list(:LinodeId => 12446).size
- => 8
- 
- irb> l.linode.ip.list
- RuntimeError: Error completing request [linode.ip.list] @ [https://api.linode.com/] with data [{}]: ERRORCODE6ERRORMESSAGELINODEID is required but was not passed in
- 	from ./lib/linode.rb:45:in `send_request'
- 	from ./lib/linode.rb:13:in `list'
- 	from (irb):10
- irb> l.linode.ip.list(:LinodeId => 12446)
- => [#<OpenStruct rdns_name="byggvir.websages.com", ipaddressid=12286, linodeid=12446, ispublic=1, ipaddress="209.123.234.161">, #<OpenStruct rdns_name="li101-51.members.linode.com", ipaddressid=23981, linodeid=12446, ispublic=1, ipaddress="97.107.140.51">]
- irb> ^D@ Wed Aug 05 01:50:52 rick@Yer-Moms-Computer
-
-CREDITS:
- - Thanks to Aditya Sanghi (github: asanghi) for a patch to properly namespace stackscripts functionality.
- - Thanks to Dan Hodos (github: danhodos) for diagnosing and fixing an issue with sending GET requests instead of POST request.
- - Thanks to Aaron Hamid for updates for RSpec 2 and work on user.getapikey + username/password initialization.
- - Thanks to Musfuut (github: musfuut) for diagnosing and recommending a fix for OpenStruct and 'type' data members in Linode returned results.
- - Thanks to mihaibirsan (github: mihaibirsan) for diagnosing a problem with dependencies on the 'crack' library.
- - Thanks to Adam Durana (github: durana) for adding support for linode.ip.addprivate.