linaro-jekyll-theme 1.1 → 4.1.0

data/_sass/bootstrap/mixins/_caret.scss

@@ -0,0 +1,66 @@
+@mixin caret-down {
+  border-top: $caret-width solid;
+  border-right: $caret-width solid transparent;
+  border-bottom: 0;
+  border-left: $caret-width solid transparent;
+}
+
+@mixin caret-up {
+  border-top: 0;
+  border-right: $caret-width solid transparent;
+  border-bottom: $caret-width solid;
+  border-left: $caret-width solid transparent;
+}
+
+@mixin caret-right {
+  border-top: $caret-width solid transparent;
+  border-right: 0;
+  border-bottom: $caret-width solid transparent;
+  border-left: $caret-width solid;
+}
+
+@mixin caret-left {
+  border-top: $caret-width solid transparent;
+  border-right: $caret-width solid;
+  border-bottom: $caret-width solid transparent;
+}
+
+@mixin caret($direction: down) {
+  @if $enable-caret {
+    &::after {
+      display: inline-block;
+      width: 0;
+      height: 0;
+      margin-left: $caret-width * .85;
+      vertical-align: $caret-width * .85;
+      content: "";
+      @if $direction == down {
+        @include caret-down;
+      } @else if $direction == up {
+        @include caret-up;
+      } @else if $direction == right {
+        @include caret-right;
+      }
+    }
+
+    @if $direction == left {
+      &::after {
+        display: none;
+      }
+
+      &::before {
+        display: inline-block;
+        width: 0;
+        height: 0;
+        margin-right: $caret-width * .85;
+        vertical-align: $caret-width * .85;
+        content: "";
+        @include caret-left;
+      }
+    }
+
+    &:empty::after {
+      margin-left: 0;
+    }
+  }
+}

data/_sass/bootstrap/mixins/_clearfix.scss

@@ -1,22 +1,7 @@
-// Clearfix
-//
-// For modern browsers
-// 1. The space content is one way to avoid an Opera bug when the
-//    contenteditable attribute is included anywhere else in the document.
-//    Otherwise it causes space to appear at the top and bottom of elements
-//    that are clearfixed.
-// 2. The use of `table` rather than `block` is only necessary if using
-//    `:before` to contain the top-margins of child elements.
-//
-// Source: http://nicolasgallagher.com/micro-clearfix-hack/
-
 @mixin clearfix() {
-  &:before,
-  &:after {
-    content: " "; // 1
-    display: table; // 2
-  }
-  &:after {
+  &::after {
+    display: block;
     clear: both;
+    content: "";
   }
 }

data/_sass/bootstrap/mixins/_float.scss

@@ -0,0 +1,11 @@
+// stylelint-disable declaration-no-important
+
+@mixin float-left {
+  float: left !important;
+}
+@mixin float-right {
+  float: right !important;
+}
+@mixin float-none {
+  float: none !important;
+}

data/_sass/bootstrap/mixins/_forms.scss

@@ -1,49 +1,7 @@
-// Form validation states
-//
-// Used in forms.less to generate the form validation CSS for warnings, errors,
-// and successes.
-
-@mixin form-control-validation($text-color: #555, $border-color: #ccc, $background-color: #f5f5f5) {
-  // Color the label and help text
-  .help-block,
-  .control-label,
-  .radio,
-  .checkbox,
-  .radio-inline,
-  .checkbox-inline,
-  &.radio label,
-  &.checkbox label,
-  &.radio-inline label,
-  &.checkbox-inline label  {
-    color: $text-color;
-  }
-  // Set the border and box shadow on specific inputs to match
-  .form-control {
-    border-color: $border-color;
-    @include box-shadow(inset 0 1px 1px rgba(0,0,0,.075)); // Redeclare so transitions work
-    &:focus {
-      border-color: darken($border-color, 10%);
-      $shadow: inset 0 1px 1px rgba(0,0,0,.075), 0 0 6px lighten($border-color, 20%);
-      @include box-shadow($shadow);
-    }
-  }
-  // Set validation states also for addons
-  .input-group-addon {
-    color: $text-color;
-    border-color: $border-color;
-    background-color: $background-color;
-  }
-  // Optional feedback icon
-  .form-control-feedback {
-    color: $text-color;
-  }
-}
-
-
 // Form control focus state
 //
 // Generate a customized focus state and for any input with the specified color,
-// which defaults to the `$input-border-focus` variable.
+// which defaults to the `$input-focus-border-color` variable.
 //
 // We highly encourage you to not customize the default value, but instead use
 // this to tweak colors on an as-needed basis. This aesthetic change is based on
@@ -52,37 +10,138 @@
 //
 // Example usage: change the default blue border and shadow to white for better
 // contrast against a dark gray background.
-@mixin form-control-focus($color: $input-border-focus) {
-  $color-rgba: rgba(red($color), green($color), blue($color), .6);
+@mixin form-control-focus() {
   &:focus {
-    border-color: $color;
+    color: $input-focus-color;
+    background-color: $input-focus-bg;
+    border-color: $input-focus-border-color;
     outline: 0;
-    @include box-shadow(inset 0 1px 1px rgba(0,0,0,.075), 0 0 8px $color-rgba);
+    // Avoid using mixin so we can pass custom focus shadow properly
+    @if $enable-shadows {
+      box-shadow: $input-box-shadow, $input-focus-box-shadow;
+    } @else {
+      box-shadow: $input-focus-box-shadow;
+    }
   }
 }
 
-// Form control sizing
-//
-// Relative text size, padding, and border-radii changes for form controls. For
-// horizontal sizing, wrap controls in the predefined grid classes. `<select>`
-// element gets special love because it's special, and that's a fact!
-// [converter] $parent hack
-@mixin input-size($parent, $input-height, $padding-vertical, $padding-horizontal, $font-size, $line-height, $border-radius) {
-  #{$parent} {
-    height: $input-height;
-    padding: $padding-vertical $padding-horizontal;
-    font-size: $font-size;
-    line-height: $line-height;
-    border-radius: $border-radius;
+
+@mixin form-validation-state($state, $color) {
+  .#{$state}-feedback {
+    display: none;
+    width: 100%;
+    margin-top: $form-feedback-margin-top;
+    font-size: $form-feedback-font-size;
+    color: $color;
   }
 
-  select#{$parent} {
-    height: $input-height;
-    line-height: $input-height;
+  .#{$state}-tooltip {
+    position: absolute;
+    top: 100%;
+    z-index: 5;
+    display: none;
+    max-width: 100%; // Contain to parent when possible
+    padding: $tooltip-padding-y $tooltip-padding-x;
+    margin-top: .1rem;
+    font-size: $tooltip-font-size;
+    line-height: $line-height-base;
+    color: color-yiq($color);
+    background-color: rgba($color, $tooltip-opacity);
+    @include border-radius($tooltip-border-radius);
   }
 
-  textarea#{$parent},
-  select[multiple]#{$parent} {
-    height: auto;
+  .form-control,
+  .custom-select {
+    .was-validated &:#{$state},
+    &.is-#{$state} {
+      border-color: $color;
+
+      &:focus {
+        border-color: $color;
+        box-shadow: 0 0 0 $input-focus-width rgba($color, .25);
+      }
+
+      ~ .#{$state}-feedback,
+      ~ .#{$state}-tooltip {
+        display: block;
+      }
+    }
+  }
+
+  .form-control-file {
+    .was-validated &:#{$state},
+    &.is-#{$state} {
+      ~ .#{$state}-feedback,
+      ~ .#{$state}-tooltip {
+        display: block;
+      }
+    }
+  }
+
+  .form-check-input {
+    .was-validated &:#{$state},
+    &.is-#{$state} {
+      ~ .form-check-label {
+        color: $color;
+      }
+
+      ~ .#{$state}-feedback,
+      ~ .#{$state}-tooltip {
+        display: block;
+      }
+    }
+  }
+
+  .custom-control-input {
+    .was-validated &:#{$state},
+    &.is-#{$state} {
+      ~ .custom-control-label {
+        color: $color;
+
+        &::before {
+          background-color: lighten($color, 25%);
+        }
+      }
+
+      ~ .#{$state}-feedback,
+      ~ .#{$state}-tooltip {
+        display: block;
+      }
+
+      &:checked {
+        ~ .custom-control-label::before {
+          @include gradient-bg(lighten($color, 10%));
+        }
+      }
+
+      &:focus {
+        ~ .custom-control-label::before {
+          box-shadow: 0 0 0 1px $body-bg, 0 0 0 $input-focus-width rgba($color, .25);
+        }
+      }
+    }
+  }
+
+  // custom file
+  .custom-file-input {
+    .was-validated &:#{$state},
+    &.is-#{$state} {
+      ~ .custom-file-label {
+        border-color: $color;
+
+        &::after { border-color: inherit; }
+      }
+
+      ~ .#{$state}-feedback,
+      ~ .#{$state}-tooltip {
+        display: block;
+      }
+
+      &:focus {
+        ~ .custom-file-label {
+          box-shadow: 0 0 0 $input-focus-width rgba($color, .25);
+        }
+      }
+    }
   }
 }

data/_sass/bootstrap/mixins/_gradients.scss

@@ -1,58 +1,45 @@
 // Gradients
 
-
+@mixin gradient-bg($color) {
+  @if $enable-gradients {
+    background: $color linear-gradient(180deg, mix($body-bg, $color, 15%), $color) repeat-x;
+  } @else {
+    background-color: $color;
+  }
+}
 
 // Horizontal gradient, from left to right
 //
 // Creates two color stops, start and end, by specifying a color and position for each color stop.
-// Color stops are not available in IE9 and below.
-@mixin gradient-horizontal($start-color: #555, $end-color: #333, $start-percent: 0%, $end-percent: 100%) {
-  background-image: -webkit-linear-gradient(left, $start-color $start-percent, $end-color $end-percent); // Safari 5.1-6, Chrome 10+
-  background-image: -o-linear-gradient(left, $start-color $start-percent, $end-color $end-percent); // Opera 12
-  background-image: linear-gradient(to right, $start-color $start-percent, $end-color $end-percent); // Standard, IE10, Firefox 16+, Opera 12.10+, Safari 7+, Chrome 26+
+@mixin gradient-x($start-color: $gray-700, $end-color: $gray-800, $start-percent: 0%, $end-percent: 100%) {
+  background-image: linear-gradient(to right, $start-color $start-percent, $end-color $end-percent);
   background-repeat: repeat-x;
-  filter: progid:DXImageTransform.Microsoft.gradient(startColorstr='#{ie-hex-str($start-color)}', endColorstr='#{ie-hex-str($end-color)}', GradientType=1); // IE9 and down
 }
 
 // Vertical gradient, from top to bottom
 //
 // Creates two color stops, start and end, by specifying a color and position for each color stop.
-// Color stops are not available in IE9 and below.
-@mixin gradient-vertical($start-color: #555, $end-color: #333, $start-percent: 0%, $end-percent: 100%) {
-  background-image: -webkit-linear-gradient(top, $start-color $start-percent, $end-color $end-percent);  // Safari 5.1-6, Chrome 10+
-  background-image: -o-linear-gradient(top, $start-color $start-percent, $end-color $end-percent);  // Opera 12
-  background-image: linear-gradient(to bottom, $start-color $start-percent, $end-color $end-percent); // Standard, IE10, Firefox 16+, Opera 12.10+, Safari 7+, Chrome 26+
+@mixin gradient-y($start-color: $gray-700, $end-color: $gray-800, $start-percent: 0%, $end-percent: 100%) {
+  background-image: linear-gradient(to bottom, $start-color $start-percent, $end-color $end-percent);
   background-repeat: repeat-x;
-  filter: progid:DXImageTransform.Microsoft.gradient(startColorstr='#{ie-hex-str($start-color)}', endColorstr='#{ie-hex-str($end-color)}', GradientType=0); // IE9 and down
 }
 
-@mixin gradient-directional($start-color: #555, $end-color: #333, $deg: 45deg) {
+@mixin gradient-directional($start-color: $gray-700, $end-color: $gray-800, $deg: 45deg) {
+  background-image: linear-gradient($deg, $start-color, $end-color);
   background-repeat: repeat-x;
-  background-image: -webkit-linear-gradient($deg, $start-color, $end-color); // Safari 5.1-6, Chrome 10+
-  background-image: -o-linear-gradient($deg, $start-color, $end-color); // Opera 12
-  background-image: linear-gradient($deg, $start-color, $end-color); // Standard, IE10, Firefox 16+, Opera 12.10+, Safari 7+, Chrome 26+
 }
-@mixin gradient-horizontal-three-colors($start-color: #00b3ee, $mid-color: #7a43b6, $color-stop: 50%, $end-color: #c3325f) {
-  background-image: -webkit-linear-gradient(left, $start-color, $mid-color $color-stop, $end-color);
-  background-image: -o-linear-gradient(left, $start-color, $mid-color $color-stop, $end-color);
+@mixin gradient-x-three-colors($start-color: $blue, $mid-color: $purple, $color-stop: 50%, $end-color: $red) {
   background-image: linear-gradient(to right, $start-color, $mid-color $color-stop, $end-color);
   background-repeat: no-repeat;
-  filter: progid:DXImageTransform.Microsoft.gradient(startColorstr='#{ie-hex-str($start-color)}', endColorstr='#{ie-hex-str($end-color)}', GradientType=1); // IE9 and down, gets no color-stop at all for proper fallback
 }
-@mixin gradient-vertical-three-colors($start-color: #00b3ee, $mid-color: #7a43b6, $color-stop: 50%, $end-color: #c3325f) {
-  background-image: -webkit-linear-gradient($start-color, $mid-color $color-stop, $end-color);
-  background-image: -o-linear-gradient($start-color, $mid-color $color-stop, $end-color);
+@mixin gradient-y-three-colors($start-color: $blue, $mid-color: $purple, $color-stop: 50%, $end-color: $red) {
   background-image: linear-gradient($start-color, $mid-color $color-stop, $end-color);
   background-repeat: no-repeat;
-  filter: progid:DXImageTransform.Microsoft.gradient(startColorstr='#{ie-hex-str($start-color)}', endColorstr='#{ie-hex-str($end-color)}', GradientType=0); // IE9 and down, gets no color-stop at all for proper fallback
 }
-@mixin gradient-radial($inner-color: #555, $outer-color: #333) {
-  background-image: -webkit-radial-gradient(circle, $inner-color, $outer-color);
+@mixin gradient-radial($inner-color: $gray-700, $outer-color: $gray-800) {
   background-image: radial-gradient(circle, $inner-color, $outer-color);
   background-repeat: no-repeat;
 }
-@mixin gradient-striped($color: rgba(255,255,255,.15), $angle: 45deg) {
-  background-image: -webkit-linear-gradient($angle, $color 25%, transparent 25%, transparent 50%, $color 50%, $color 75%, transparent 75%, transparent);
-  background-image: -o-linear-gradient($angle, $color 25%, transparent 25%, transparent 50%, $color 50%, $color 75%, transparent 75%, transparent);
+@mixin gradient-striped($color: rgba($white, .15), $angle: 45deg) {
   background-image: linear-gradient($angle, $color 25%, transparent 25%, transparent 50%, $color 50%, $color 75%, transparent 75%, transparent);
 }

data/_sass/bootstrap/mixins/_grid-framework.scss

@@ -3,79 +3,65 @@
 // Used only by Bootstrap to generate the correct number of grid classes given
 // any value of `$grid-columns`.
 
-// [converter] This is defined recursively in LESS, but Sass supports real loops
-@mixin make-grid-columns($i: 1, $list: ".col-xs-#{$i}, .col-sm-#{$i}, .col-md-#{$i}, .col-lg-#{$i}") {
-  @for $i from (1 + 1) through $grid-columns {
-    $list: "#{$list}, .col-xs-#{$i}, .col-sm-#{$i}, .col-md-#{$i}, .col-lg-#{$i}";
-  }
-  #{$list} {
+@mixin make-grid-columns($columns: $grid-columns, $gutter: $grid-gutter-width, $breakpoints: $grid-breakpoints) {
+  // Common properties for all breakpoints
+  %grid-column {
     position: relative;
-    // Prevent columns from collapsing when empty
-    min-height: 1px;
-    // Inner gutter via padding
-    padding-left:  ceil(($grid-gutter-width / 2));
-    padding-right: floor(($grid-gutter-width / 2));
+    width: 100%;
+    min-height: 1px; // Prevent columns from collapsing when empty
+    padding-right: ($gutter / 2);
+    padding-left: ($gutter / 2);
   }
-}
-
-
-// [converter] This is defined recursively in LESS, but Sass supports real loops
-@mixin float-grid-columns($class, $i: 1, $list: ".col-#{$class}-#{$i}") {
-  @for $i from (1 + 1) through $grid-columns {
-    $list: "#{$list}, .col-#{$class}-#{$i}";
-  }
-  #{$list} {
-    float: left;
-  }
-}
 
+  @each $breakpoint in map-keys($breakpoints) {
+    $infix: breakpoint-infix($breakpoint, $breakpoints);
 
-@mixin calc-grid-column($index, $class, $type) {
-  @if ($type == width) and ($index > 0) {
-    .col-#{$class}-#{$index} {
-      width: percentage(($index / $grid-columns));
+    // Allow columns to stretch full width below their breakpoints
+    @for $i from 1 through $columns {
+      .col#{$infix}-#{$i} {
+        @extend %grid-column;
+      }
     }
-  }
-  @if ($type == push) and ($index > 0) {
-    .col-#{$class}-push-#{$index} {
-      left: percentage(($index / $grid-columns));
-    }
-  }
-  @if ($type == push) and ($index == 0) {
-    .col-#{$class}-push-0 {
-      left: auto;
+    .col#{$infix},
+    .col#{$infix}-auto {
+      @extend %grid-column;
     }
-  }
-  @if ($type == pull) and ($index > 0) {
-    .col-#{$class}-pull-#{$index} {
-      right: percentage(($index / $grid-columns));
-    }
-  }
-  @if ($type == pull) and ($index == 0) {
-    .col-#{$class}-pull-0 {
-      right: auto;
-    }
-  }
-  @if ($type == offset) {
-    .col-#{$class}-offset-#{$index} {
-      margin-left: percentage(($index / $grid-columns));
-    }
-  }
-}
 
-// [converter] This is defined recursively in LESS, but Sass supports real loops
-@mixin loop-grid-columns($columns, $class, $type) {
-  @for $i from 0 through $columns {
-    @include calc-grid-column($i, $class, $type);
-  }
-}
+    @include media-breakpoint-up($breakpoint, $breakpoints) {
+      // Provide basic `.col-{bp}` classes for equal-width flexbox columns
+      .col#{$infix} {
+        flex-basis: 0;
+        flex-grow: 1;
+        max-width: 100%;
+      }
+      .col#{$infix}-auto {
+        flex: 0 0 auto;
+        width: auto;
+        max-width: none; // Reset earlier grid tiers
+      }
+
+      @for $i from 1 through $columns {
+        .col#{$infix}-#{$i} {
+          @include make-col($i, $columns);
+        }
+      }
+
+      .order#{$infix}-first { order: -1; }
 
+      .order#{$infix}-last { order: $columns + 1; }
 
-// Create grid for specific class
-@mixin make-grid($class) {
-  @include float-grid-columns($class);
-  @include loop-grid-columns($grid-columns, $class, width);
-  @include loop-grid-columns($grid-columns, $class, pull);
-  @include loop-grid-columns($grid-columns, $class, push);
-  @include loop-grid-columns($grid-columns, $class, offset);
+      @for $i from 0 through $columns {
+        .order#{$infix}-#{$i} { order: $i; }
+      }
+
+      // `$columns - 1` because offsetting by the width of an entire row isn't possible
+      @for $i from 0 through ($columns - 1) {
+        @if not ($infix == "" and $i == 0) { // Avoid emitting useless .offset-0
+          .offset#{$infix}-#{$i} {
+            @include make-col-offset($i, $columns);
+          }
+        }
+      }
+    }
+  }
 }