licentivo-launch 0.1.1

data/vendor/curl/include/zconf.h

@@ -0,0 +1,206 @@
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995-2024 Jean-loup Gailly, Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#ifndef ZCONF_H
+#define ZCONF_H
+
+#include "zlib_name_mangling.h"
+
+#if !defined(_WIN32) && defined(__WIN32__)
+#  define _WIN32
+#endif
+
+/* Clang macro for detecting declspec support
+ * https://clang.llvm.org/docs/LanguageExtensions.html#has-declspec-attribute
+ */
+#ifndef __has_declspec_attribute
+#  define __has_declspec_attribute(x) 0
+#endif
+
+#if defined(ZLIB_CONST) && !defined(z_const)
+#  define z_const const
+#else
+#  define z_const
+#endif
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+#  define MAX_MEM_LEVEL 9
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
+#ifndef MIN_WBITS
+#  define MIN_WBITS   8  /* 256 LZ77 window */
+#endif
+#ifndef MAX_WBITS
+#  define MAX_WBITS   15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+            (1 << (windowBits+2)) +  (1 << (memLevel+9))
+ that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+   The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus about 7 kilobytes
+ for small objects.
+*/
+
+/* Type declarations */
+
+
+#ifndef OF /* function prototypes */
+#  define OF(args)  args
+#endif
+
+#ifdef ZLIB_INTERNAL
+#  define Z_INTERNAL ZLIB_INTERNAL
+#endif
+
+/* If building or using zlib as a DLL, define ZLIB_DLL.
+ * This is not mandatory, but it offers a little performance increase.
+ */
+#if defined(ZLIB_DLL) && (defined(_WIN32) || (__has_declspec_attribute(dllexport) && __has_declspec_attribute(dllimport)))
+#  ifdef Z_INTERNAL
+#    define Z_EXTERN extern __declspec(dllexport)
+#  else
+#    define Z_EXTERN extern __declspec(dllimport)
+#  endif
+#endif
+
+/* If building or using zlib with the WINAPI/WINAPIV calling convention,
+ * define ZLIB_WINAPI.
+ * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
+ */
+#if defined(ZLIB_WINAPI) && defined(_WIN32)
+#  ifndef WIN32_LEAN_AND_MEAN
+#    define WIN32_LEAN_AND_MEAN
+#  endif
+#  include <windows.h>
+   /* No need for _export, use ZLIB.DEF instead. */
+   /* For complete Windows compatibility, use WINAPI, not __stdcall. */
+#  define Z_EXPORT WINAPI
+#  define Z_EXPORTVA WINAPIV
+#endif
+
+#ifndef Z_EXTERN
+#  define Z_EXTERN extern
+#endif
+#ifndef Z_EXPORT
+#  define Z_EXPORT
+#endif
+#ifndef Z_EXPORTVA
+#  define Z_EXPORTVA
+#endif
+
+/* Conditional exports */
+#define ZNG_CONDEXPORT Z_INTERNAL
+
+/* For backwards compatibility */
+
+#ifndef ZEXTERN
+#  define ZEXTERN Z_EXTERN
+#endif
+#ifndef ZEXPORT
+#  define ZEXPORT Z_EXPORT
+#endif
+#ifndef ZEXPORTVA
+#  define ZEXPORTVA Z_EXPORTVA
+#endif
+#ifndef FAR
+#  define FAR
+#endif
+
+/* Legacy zlib typedefs for backwards compatibility. Don't assume stdint.h is defined. */
+typedef unsigned char Byte;
+typedef Byte Bytef;
+
+typedef unsigned int   uInt;  /* 16 bits or more */
+typedef unsigned long  uLong; /* 32 bits or more */
+
+typedef char  charf;
+typedef int   intf;
+typedef uInt  uIntf;
+typedef uLong uLongf;
+
+typedef void const *voidpc;
+typedef void       *voidpf;
+typedef void       *voidp;
+
+typedef unsigned int z_crc_t;
+
+#if 1    /* was set to #if 1 by configure/cmake/etc */
+#  define Z_HAVE_UNISTD_H
+#endif
+
+#ifdef NEED_PTRDIFF_T    /* may be set to #if 1 by configure/cmake/etc */
+typedef PTRDIFF_TYPE ptrdiff_t;
+#endif
+
+#include <sys/types.h>      /* for off_t */
+
+#include <stddef.h>         /* for wchar_t and NULL */
+
+/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
+ * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
+ * though the former does not conform to the LFS document), but considering
+ * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
+ * equivalently requesting no 64-bit operations
+ */
+#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
+#  undef _LARGEFILE64_SOURCE
+#endif
+
+#if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
+#  include <unistd.h>         /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
+#  ifndef z_off_t
+#    define z_off_t off_t
+#  endif
+#endif
+
+#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
+#  define Z_LFS64
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
+#  define Z_LARGE64
+#endif
+
+#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
+#  define Z_WANT64
+#endif
+
+#if !defined(SEEK_SET)
+#  define SEEK_SET        0       /* Seek from beginning of file.  */
+#  define SEEK_CUR        1       /* Seek from current position.  */
+#  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
+#endif
+
+#ifndef z_off_t
+#  define z_off_t long
+#endif
+
+#if !defined(_WIN32) && defined(Z_LARGE64)
+#  define z_off64_t off64_t
+#else
+#  if defined(__MSYS__)
+#    define z_off64_t _off64_t
+#  elif defined(_WIN32) && !defined(__GNUC__)
+#    define z_off64_t __int64
+#  else
+#    define z_off64_t z_off_t
+#  endif
+#endif
+
+typedef size_t z_size_t;
+
+#endif /* ZCONF_H */

data/vendor/curl/include/zdict.h

@@ -0,0 +1,481 @@
+/*
+ * Copyright (c) Meta Platforms, Inc. and affiliates.
+ * All rights reserved.
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+ */
+
+#ifndef ZSTD_ZDICT_H
+#define ZSTD_ZDICT_H
+
+
+/*======  Dependencies  ======*/
+#include <stddef.h>  /* size_t */
+
+#if defined (__cplusplus)
+extern "C" {
+#endif
+
+/* =====   ZDICTLIB_API : control library symbols visibility   ===== */
+#ifndef ZDICTLIB_VISIBLE
+   /* Backwards compatibility with old macro name */
+#  ifdef ZDICTLIB_VISIBILITY
+#    define ZDICTLIB_VISIBLE ZDICTLIB_VISIBILITY
+#  elif defined(__GNUC__) && (__GNUC__ >= 4) && !defined(__MINGW32__)
+#    define ZDICTLIB_VISIBLE __attribute__ ((visibility ("default")))
+#  else
+#    define ZDICTLIB_VISIBLE
+#  endif
+#endif
+
+#ifndef ZDICTLIB_HIDDEN
+#  if defined(__GNUC__) && (__GNUC__ >= 4) && !defined(__MINGW32__)
+#    define ZDICTLIB_HIDDEN __attribute__ ((visibility ("hidden")))
+#  else
+#    define ZDICTLIB_HIDDEN
+#  endif
+#endif
+
+#if defined(ZSTD_DLL_EXPORT) && (ZSTD_DLL_EXPORT==1)
+#  define ZDICTLIB_API __declspec(dllexport) ZDICTLIB_VISIBLE
+#elif defined(ZSTD_DLL_IMPORT) && (ZSTD_DLL_IMPORT==1)
+#  define ZDICTLIB_API __declspec(dllimport) ZDICTLIB_VISIBLE /* It isn't required but allows to generate better code, saving a function pointer load from the IAT and an indirect jump.*/
+#else
+#  define ZDICTLIB_API ZDICTLIB_VISIBLE
+#endif
+
+/*******************************************************************************
+ * Zstd dictionary builder
+ *
+ * FAQ
+ * ===
+ * Why should I use a dictionary?
+ * ------------------------------
+ *
+ * Zstd can use dictionaries to improve compression ratio of small data.
+ * Traditionally small files don't compress well because there is very little
+ * repetition in a single sample, since it is small. But, if you are compressing
+ * many similar files, like a bunch of JSON records that share the same
+ * structure, you can train a dictionary on ahead of time on some samples of
+ * these files. Then, zstd can use the dictionary to find repetitions that are
+ * present across samples. This can vastly improve compression ratio.
+ *
+ * When is a dictionary useful?
+ * ----------------------------
+ *
+ * Dictionaries are useful when compressing many small files that are similar.
+ * The larger a file is, the less benefit a dictionary will have. Generally,
+ * we don't expect dictionary compression to be effective past 100KB. And the
+ * smaller a file is, the more we would expect the dictionary to help.
+ *
+ * How do I use a dictionary?
+ * --------------------------
+ *
+ * Simply pass the dictionary to the zstd compressor with
+ * `ZSTD_CCtx_loadDictionary()`. The same dictionary must then be passed to
+ * the decompressor, using `ZSTD_DCtx_loadDictionary()`. There are other
+ * more advanced functions that allow selecting some options, see zstd.h for
+ * complete documentation.
+ *
+ * What is a zstd dictionary?
+ * --------------------------
+ *
+ * A zstd dictionary has two pieces: Its header, and its content. The header
+ * contains a magic number, the dictionary ID, and entropy tables. These
+ * entropy tables allow zstd to save on header costs in the compressed file,
+ * which really matters for small data. The content is just bytes, which are
+ * repeated content that is common across many samples.
+ *
+ * What is a raw content dictionary?
+ * ---------------------------------
+ *
+ * A raw content dictionary is just bytes. It doesn't have a zstd dictionary
+ * header, a dictionary ID, or entropy tables. Any buffer is a valid raw
+ * content dictionary.
+ *
+ * How do I train a dictionary?
+ * ----------------------------
+ *
+ * Gather samples from your use case. These samples should be similar to each
+ * other. If you have several use cases, you could try to train one dictionary
+ * per use case.
+ *
+ * Pass those samples to `ZDICT_trainFromBuffer()` and that will train your
+ * dictionary. There are a few advanced versions of this function, but this
+ * is a great starting point. If you want to further tune your dictionary
+ * you could try `ZDICT_optimizeTrainFromBuffer_cover()`. If that is too slow
+ * you can try `ZDICT_optimizeTrainFromBuffer_fastCover()`.
+ *
+ * If the dictionary training function fails, that is likely because you
+ * either passed too few samples, or a dictionary would not be effective
+ * for your data. Look at the messages that the dictionary trainer printed,
+ * if it doesn't say too few samples, then a dictionary would not be effective.
+ *
+ * How large should my dictionary be?
+ * ----------------------------------
+ *
+ * A reasonable dictionary size, the `dictBufferCapacity`, is about 100KB.
+ * The zstd CLI defaults to a 110KB dictionary. You likely don't need a
+ * dictionary larger than that. But, most use cases can get away with a
+ * smaller dictionary. The advanced dictionary builders can automatically
+ * shrink the dictionary for you, and select the smallest size that doesn't
+ * hurt compression ratio too much. See the `shrinkDict` parameter.
+ * A smaller dictionary can save memory, and potentially speed up
+ * compression.
+ *
+ * How many samples should I provide to the dictionary builder?
+ * ------------------------------------------------------------
+ *
+ * We generally recommend passing ~100x the size of the dictionary
+ * in samples. A few thousand should suffice. Having too few samples
+ * can hurt the dictionaries effectiveness. Having more samples will
+ * only improve the dictionaries effectiveness. But having too many
+ * samples can slow down the dictionary builder.
+ *
+ * How do I determine if a dictionary will be effective?
+ * -----------------------------------------------------
+ *
+ * Simply train a dictionary and try it out. You can use zstd's built in
+ * benchmarking tool to test the dictionary effectiveness.
+ *
+ *   # Benchmark levels 1-3 without a dictionary
+ *   zstd -b1e3 -r /path/to/my/files
+ *   # Benchmark levels 1-3 with a dictionary
+ *   zstd -b1e3 -r /path/to/my/files -D /path/to/my/dictionary
+ *
+ * When should I retrain a dictionary?
+ * -----------------------------------
+ *
+ * You should retrain a dictionary when its effectiveness drops. Dictionary
+ * effectiveness drops as the data you are compressing changes. Generally, we do
+ * expect dictionaries to "decay" over time, as your data changes, but the rate
+ * at which they decay depends on your use case. Internally, we regularly
+ * retrain dictionaries, and if the new dictionary performs significantly
+ * better than the old dictionary, we will ship the new dictionary.
+ *
+ * I have a raw content dictionary, how do I turn it into a zstd dictionary?
+ * -------------------------------------------------------------------------
+ *
+ * If you have a raw content dictionary, e.g. by manually constructing it, or
+ * using a third-party dictionary builder, you can turn it into a zstd
+ * dictionary by using `ZDICT_finalizeDictionary()`. You'll also have to
+ * provide some samples of the data. It will add the zstd header to the
+ * raw content, which contains a dictionary ID and entropy tables, which
+ * will improve compression ratio, and allow zstd to write the dictionary ID
+ * into the frame, if you so choose.
+ *
+ * Do I have to use zstd's dictionary builder?
+ * -------------------------------------------
+ *
+ * No! You can construct dictionary content however you please, it is just
+ * bytes. It will always be valid as a raw content dictionary. If you want
+ * a zstd dictionary, which can improve compression ratio, use
+ * `ZDICT_finalizeDictionary()`.
+ *
+ * What is the attack surface of a zstd dictionary?
+ * ------------------------------------------------
+ *
+ * Zstd is heavily fuzz tested, including loading fuzzed dictionaries, so
+ * zstd should never crash, or access out-of-bounds memory no matter what
+ * the dictionary is. However, if an attacker can control the dictionary
+ * during decompression, they can cause zstd to generate arbitrary bytes,
+ * just like if they controlled the compressed data.
+ *
+ ******************************************************************************/
+
+
+/*! ZDICT_trainFromBuffer():
+ *  Train a dictionary from an array of samples.
+ *  Redirect towards ZDICT_optimizeTrainFromBuffer_fastCover() single-threaded, with d=8, steps=4,
+ *  f=20, and accel=1.
+ *  Samples must be stored concatenated in a single flat buffer `samplesBuffer`,
+ *  supplied with an array of sizes `samplesSizes`, providing the size of each sample, in order.
+ *  The resulting dictionary will be saved into `dictBuffer`.
+ * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`)
+ *          or an error code, which can be tested with ZDICT_isError().
+ *  Note:  Dictionary training will fail if there are not enough samples to construct a
+ *         dictionary, or if most of the samples are too small (< 8 bytes being the lower limit).
+ *         If dictionary training fails, you should use zstd without a dictionary, as the dictionary
+ *         would've been ineffective anyways. If you believe your samples would benefit from a dictionary
+ *         please open an issue with details, and we can look into it.
+ *  Note: ZDICT_trainFromBuffer()'s memory usage is about 6 MB.
+ *  Tips: In general, a reasonable dictionary has a size of ~ 100 KB.
+ *        It's possible to select smaller or larger size, just by specifying `dictBufferCapacity`.
+ *        In general, it's recommended to provide a few thousands samples, though this can vary a lot.
+ *        It's recommended that total size of all samples be about ~x100 times the target size of dictionary.
+ */
+ZDICTLIB_API size_t ZDICT_trainFromBuffer(void* dictBuffer, size_t dictBufferCapacity,
+                                    const void* samplesBuffer,
+                                    const size_t* samplesSizes, unsigned nbSamples);
+
+typedef struct {
+    int      compressionLevel;   /**< optimize for a specific zstd compression level; 0 means default */
+    unsigned notificationLevel;  /**< Write log to stderr; 0 = none (default); 1 = errors; 2 = progression; 3 = details; 4 = debug; */
+    unsigned dictID;             /**< force dictID value; 0 means auto mode (32-bits random value)
+                                  *   NOTE: The zstd format reserves some dictionary IDs for future use.
+                                  *         You may use them in private settings, but be warned that they
+                                  *         may be used by zstd in a public dictionary registry in the future.
+                                  *         These dictionary IDs are:
+                                  *           - low range  : <= 32767
+                                  *           - high range : >= (2^31)
+                                  */
+} ZDICT_params_t;
+
+/*! ZDICT_finalizeDictionary():
+ * Given a custom content as a basis for dictionary, and a set of samples,
+ * finalize dictionary by adding headers and statistics according to the zstd
+ * dictionary format.
+ *
+ * Samples must be stored concatenated in a flat buffer `samplesBuffer`,
+ * supplied with an array of sizes `samplesSizes`, providing the size of each
+ * sample in order. The samples are used to construct the statistics, so they
+ * should be representative of what you will compress with this dictionary.
+ *
+ * The compression level can be set in `parameters`. You should pass the
+ * compression level you expect to use in production. The statistics for each
+ * compression level differ, so tuning the dictionary for the compression level
+ * can help quite a bit.
+ *
+ * You can set an explicit dictionary ID in `parameters`, or allow us to pick
+ * a random dictionary ID for you, but we can't guarantee no collisions.
+ *
+ * The dstDictBuffer and the dictContent may overlap, and the content will be
+ * appended to the end of the header. If the header + the content doesn't fit in
+ * maxDictSize the beginning of the content is truncated to make room, since it
+ * is presumed that the most profitable content is at the end of the dictionary,
+ * since that is the cheapest to reference.
+ *
+ * `maxDictSize` must be >= max(dictContentSize, ZDICT_DICTSIZE_MIN).
+ *
+ * @return: size of dictionary stored into `dstDictBuffer` (<= `maxDictSize`),
+ *          or an error code, which can be tested by ZDICT_isError().
+ * Note: ZDICT_finalizeDictionary() will push notifications into stderr if
+ *       instructed to, using notificationLevel>0.
+ * NOTE: This function currently may fail in several edge cases including:
+ *         * Not enough samples
+ *         * Samples are uncompressible
+ *         * Samples are all exactly the same
+ */
+ZDICTLIB_API size_t ZDICT_finalizeDictionary(void* dstDictBuffer, size_t maxDictSize,
+                                const void* dictContent, size_t dictContentSize,
+                                const void* samplesBuffer, const size_t* samplesSizes, unsigned nbSamples,
+                                ZDICT_params_t parameters);
+
+
+/*======   Helper functions   ======*/
+ZDICTLIB_API unsigned ZDICT_getDictID(const void* dictBuffer, size_t dictSize);  /**< extracts dictID; @return zero if error (not a valid dictionary) */
+ZDICTLIB_API size_t ZDICT_getDictHeaderSize(const void* dictBuffer, size_t dictSize);  /* returns dict header size; returns a ZSTD error code on failure */
+ZDICTLIB_API unsigned ZDICT_isError(size_t errorCode);
+ZDICTLIB_API const char* ZDICT_getErrorName(size_t errorCode);
+
+#if defined (__cplusplus)
+}
+#endif
+
+#endif   /* ZSTD_ZDICT_H */
+
+#if defined(ZDICT_STATIC_LINKING_ONLY) && !defined(ZSTD_ZDICT_H_STATIC)
+#define ZSTD_ZDICT_H_STATIC
+
+#if defined (__cplusplus)
+extern "C" {
+#endif
+
+/* This can be overridden externally to hide static symbols. */
+#ifndef ZDICTLIB_STATIC_API
+#  if defined(ZSTD_DLL_EXPORT) && (ZSTD_DLL_EXPORT==1)
+#    define ZDICTLIB_STATIC_API __declspec(dllexport) ZDICTLIB_VISIBLE
+#  elif defined(ZSTD_DLL_IMPORT) && (ZSTD_DLL_IMPORT==1)
+#    define ZDICTLIB_STATIC_API __declspec(dllimport) ZDICTLIB_VISIBLE
+#  else
+#    define ZDICTLIB_STATIC_API ZDICTLIB_VISIBLE
+#  endif
+#endif
+
+/* ====================================================================================
+ * The definitions in this section are considered experimental.
+ * They should never be used with a dynamic library, as they may change in the future.
+ * They are provided for advanced usages.
+ * Use them only in association with static linking.
+ * ==================================================================================== */
+
+#define ZDICT_DICTSIZE_MIN    256
+/* Deprecated: Remove in v1.6.0 */
+#define ZDICT_CONTENTSIZE_MIN 128
+
+/*! ZDICT_cover_params_t:
+ *  k and d are the only required parameters.
+ *  For others, value 0 means default.
+ */
+typedef struct {
+    unsigned k;                  /* Segment size : constraint: 0 < k : Reasonable range [16, 2048+] */
+    unsigned d;                  /* dmer size : constraint: 0 < d <= k : Reasonable range [6, 16] */
+    unsigned steps;              /* Number of steps : Only used for optimization : 0 means default (40) : Higher means more parameters checked */
+    unsigned nbThreads;          /* Number of threads : constraint: 0 < nbThreads : 1 means single-threaded : Only used for optimization : Ignored if ZSTD_MULTITHREAD is not defined */
+    double splitPoint;           /* Percentage of samples used for training: Only used for optimization : the first nbSamples * splitPoint samples will be used to training, the last nbSamples * (1 - splitPoint) samples will be used for testing, 0 means default (1.0), 1.0 when all samples are used for both training and testing */
+    unsigned shrinkDict;         /* Train dictionaries to shrink in size starting from the minimum size and selects the smallest dictionary that is shrinkDictMaxRegression% worse than the largest dictionary. 0 means no shrinking and 1 means shrinking  */
+    unsigned shrinkDictMaxRegression; /* Sets shrinkDictMaxRegression so that a smaller dictionary can be at worse shrinkDictMaxRegression% worse than the max dict size dictionary. */
+    ZDICT_params_t zParams;
+} ZDICT_cover_params_t;
+
+typedef struct {
+    unsigned k;                  /* Segment size : constraint: 0 < k : Reasonable range [16, 2048+] */
+    unsigned d;                  /* dmer size : constraint: 0 < d <= k : Reasonable range [6, 16] */
+    unsigned f;                  /* log of size of frequency array : constraint: 0 < f <= 31 : 1 means default(20)*/
+    unsigned steps;              /* Number of steps : Only used for optimization : 0 means default (40) : Higher means more parameters checked */
+    unsigned nbThreads;          /* Number of threads : constraint: 0 < nbThreads : 1 means single-threaded : Only used for optimization : Ignored if ZSTD_MULTITHREAD is not defined */
+    double splitPoint;           /* Percentage of samples used for training: Only used for optimization : the first nbSamples * splitPoint samples will be used to training, the last nbSamples * (1 - splitPoint) samples will be used for testing, 0 means default (0.75), 1.0 when all samples are used for both training and testing */
+    unsigned accel;              /* Acceleration level: constraint: 0 < accel <= 10, higher means faster and less accurate, 0 means default(1) */
+    unsigned shrinkDict;         /* Train dictionaries to shrink in size starting from the minimum size and selects the smallest dictionary that is shrinkDictMaxRegression% worse than the largest dictionary. 0 means no shrinking and 1 means shrinking  */
+    unsigned shrinkDictMaxRegression; /* Sets shrinkDictMaxRegression so that a smaller dictionary can be at worse shrinkDictMaxRegression% worse than the max dict size dictionary. */
+
+    ZDICT_params_t zParams;
+} ZDICT_fastCover_params_t;
+
+/*! ZDICT_trainFromBuffer_cover():
+ *  Train a dictionary from an array of samples using the COVER algorithm.
+ *  Samples must be stored concatenated in a single flat buffer `samplesBuffer`,
+ *  supplied with an array of sizes `samplesSizes`, providing the size of each sample, in order.
+ *  The resulting dictionary will be saved into `dictBuffer`.
+ * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`)
+ *          or an error code, which can be tested with ZDICT_isError().
+ *          See ZDICT_trainFromBuffer() for details on failure modes.
+ *  Note: ZDICT_trainFromBuffer_cover() requires about 9 bytes of memory for each input byte.
+ *  Tips: In general, a reasonable dictionary has a size of ~ 100 KB.
+ *        It's possible to select smaller or larger size, just by specifying `dictBufferCapacity`.
+ *        In general, it's recommended to provide a few thousands samples, though this can vary a lot.
+ *        It's recommended that total size of all samples be about ~x100 times the target size of dictionary.
+ */
+ZDICTLIB_STATIC_API size_t ZDICT_trainFromBuffer_cover(
+          void *dictBuffer, size_t dictBufferCapacity,
+    const void *samplesBuffer, const size_t *samplesSizes, unsigned nbSamples,
+          ZDICT_cover_params_t parameters);
+
+/*! ZDICT_optimizeTrainFromBuffer_cover():
+ * The same requirements as above hold for all the parameters except `parameters`.
+ * This function tries many parameter combinations and picks the best parameters.
+ * `*parameters` is filled with the best parameters found,
+ * dictionary constructed with those parameters is stored in `dictBuffer`.
+ *
+ * All of the parameters d, k, steps are optional.
+ * If d is non-zero then we don't check multiple values of d, otherwise we check d = {6, 8}.
+ * if steps is zero it defaults to its default value.
+ * If k is non-zero then we don't check multiple values of k, otherwise we check steps values in [50, 2000].
+ *
+ * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`)
+ *          or an error code, which can be tested with ZDICT_isError().
+ *          On success `*parameters` contains the parameters selected.
+ *          See ZDICT_trainFromBuffer() for details on failure modes.
+ * Note: ZDICT_optimizeTrainFromBuffer_cover() requires about 8 bytes of memory for each input byte and additionally another 5 bytes of memory for each byte of memory for each thread.
+ */
+ZDICTLIB_STATIC_API size_t ZDICT_optimizeTrainFromBuffer_cover(
+          void* dictBuffer, size_t dictBufferCapacity,
+    const void* samplesBuffer, const size_t* samplesSizes, unsigned nbSamples,
+          ZDICT_cover_params_t* parameters);
+
+/*! ZDICT_trainFromBuffer_fastCover():
+ *  Train a dictionary from an array of samples using a modified version of COVER algorithm.
+ *  Samples must be stored concatenated in a single flat buffer `samplesBuffer`,
+ *  supplied with an array of sizes `samplesSizes`, providing the size of each sample, in order.
+ *  d and k are required.
+ *  All other parameters are optional, will use default values if not provided
+ *  The resulting dictionary will be saved into `dictBuffer`.
+ * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`)
+ *          or an error code, which can be tested with ZDICT_isError().
+ *          See ZDICT_trainFromBuffer() for details on failure modes.
+ *  Note: ZDICT_trainFromBuffer_fastCover() requires 6 * 2^f bytes of memory.
+ *  Tips: In general, a reasonable dictionary has a size of ~ 100 KB.
+ *        It's possible to select smaller or larger size, just by specifying `dictBufferCapacity`.
+ *        In general, it's recommended to provide a few thousands samples, though this can vary a lot.
+ *        It's recommended that total size of all samples be about ~x100 times the target size of dictionary.
+ */
+ZDICTLIB_STATIC_API size_t ZDICT_trainFromBuffer_fastCover(void *dictBuffer,
+                    size_t dictBufferCapacity, const void *samplesBuffer,
+                    const size_t *samplesSizes, unsigned nbSamples,
+                    ZDICT_fastCover_params_t parameters);
+
+/*! ZDICT_optimizeTrainFromBuffer_fastCover():
+ * The same requirements as above hold for all the parameters except `parameters`.
+ * This function tries many parameter combinations (specifically, k and d combinations)
+ * and picks the best parameters. `*parameters` is filled with the best parameters found,
+ * dictionary constructed with those parameters is stored in `dictBuffer`.
+ * All of the parameters d, k, steps, f, and accel are optional.
+ * If d is non-zero then we don't check multiple values of d, otherwise we check d = {6, 8}.
+ * if steps is zero it defaults to its default value.
+ * If k is non-zero then we don't check multiple values of k, otherwise we check steps values in [50, 2000].
+ * If f is zero, default value of 20 is used.
+ * If accel is zero, default value of 1 is used.
+ *
+ * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`)
+ *          or an error code, which can be tested with ZDICT_isError().
+ *          On success `*parameters` contains the parameters selected.
+ *          See ZDICT_trainFromBuffer() for details on failure modes.
+ * Note: ZDICT_optimizeTrainFromBuffer_fastCover() requires about 6 * 2^f bytes of memory for each thread.
+ */
+ZDICTLIB_STATIC_API size_t ZDICT_optimizeTrainFromBuffer_fastCover(void* dictBuffer,
+                    size_t dictBufferCapacity, const void* samplesBuffer,
+                    const size_t* samplesSizes, unsigned nbSamples,
+                    ZDICT_fastCover_params_t* parameters);
+
+typedef struct {
+    unsigned selectivityLevel;   /* 0 means default; larger => select more => larger dictionary */
+    ZDICT_params_t zParams;
+} ZDICT_legacy_params_t;
+
+/*! ZDICT_trainFromBuffer_legacy():
+ *  Train a dictionary from an array of samples.
+ *  Samples must be stored concatenated in a single flat buffer `samplesBuffer`,
+ *  supplied with an array of sizes `samplesSizes`, providing the size of each sample, in order.
+ *  The resulting dictionary will be saved into `dictBuffer`.
+ * `parameters` is optional and can be provided with values set to 0 to mean "default".
+ * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`)
+ *          or an error code, which can be tested with ZDICT_isError().
+ *          See ZDICT_trainFromBuffer() for details on failure modes.
+ *  Tips: In general, a reasonable dictionary has a size of ~ 100 KB.
+ *        It's possible to select smaller or larger size, just by specifying `dictBufferCapacity`.
+ *        In general, it's recommended to provide a few thousands samples, though this can vary a lot.
+ *        It's recommended that total size of all samples be about ~x100 times the target size of dictionary.
+ *  Note: ZDICT_trainFromBuffer_legacy() will send notifications into stderr if instructed to, using notificationLevel>0.
+ */
+ZDICTLIB_STATIC_API size_t ZDICT_trainFromBuffer_legacy(
+    void* dictBuffer, size_t dictBufferCapacity,
+    const void* samplesBuffer, const size_t* samplesSizes, unsigned nbSamples,
+    ZDICT_legacy_params_t parameters);
+
+
+/* Deprecation warnings */
+/* It is generally possible to disable deprecation warnings from compiler,
+   for example with -Wno-deprecated-declarations for gcc
+   or _CRT_SECURE_NO_WARNINGS in Visual.
+   Otherwise, it's also possible to manually define ZDICT_DISABLE_DEPRECATE_WARNINGS */
+#ifdef ZDICT_DISABLE_DEPRECATE_WARNINGS
+#  define ZDICT_DEPRECATED(message) /* disable deprecation warnings */
+#else
+#  define ZDICT_GCC_VERSION (__GNUC__ * 100 + __GNUC_MINOR__)
+#  if defined (__cplusplus) && (__cplusplus >= 201402) /* C++14 or greater */
+#    define ZDICT_DEPRECATED(message) [[deprecated(message)]]
+#  elif defined(__clang__) || (ZDICT_GCC_VERSION >= 405)
+#    define ZDICT_DEPRECATED(message) __attribute__((deprecated(message)))
+#  elif (ZDICT_GCC_VERSION >= 301)
+#    define ZDICT_DEPRECATED(message) __attribute__((deprecated))
+#  elif defined(_MSC_VER)
+#    define ZDICT_DEPRECATED(message) __declspec(deprecated(message))
+#  else
+#    pragma message("WARNING: You need to implement ZDICT_DEPRECATED for this compiler")
+#    define ZDICT_DEPRECATED(message)
+#  endif
+#endif /* ZDICT_DISABLE_DEPRECATE_WARNINGS */
+
+ZDICT_DEPRECATED("use ZDICT_finalizeDictionary() instead")
+ZDICTLIB_STATIC_API
+size_t ZDICT_addEntropyTablesFromBuffer(void* dictBuffer, size_t dictContentSize, size_t dictBufferCapacity,
+                                  const void* samplesBuffer, const size_t* samplesSizes, unsigned nbSamples);
+
+#if defined (__cplusplus)
+}
+#endif
+
+#endif   /* ZSTD_ZDICT_H_STATIC */