librex 0.0.19 → 0.0.20

data/lib/rex/LICENSE

@@ -1,29 +0,0 @@
-The Metasploit Rex library is provided under the 3-clause BSD license.
-
-Copyright (c) 2005-2006, Rapid7 LLC
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
- * Redistributions of source code must retain the above copyright notice, this 
-   list of conditions and the following disclaimer.
-   
- * Redistributions in binary form must reproduce the above copyright notice, 
-   this list of conditions and the following disclaimer in the documentation 
-   and/or other materials provided with the distribution.
-   
- * Neither the name of Rapid7 LLC nor the names of its contributors may be 
-   used to endorse or promote products derived from this software without 
-   specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
-ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

data/lib/rex/arch.rb

@@ -1,103 +0,0 @@
-require 'rex/constants'
-
-module Rex
-
-
-###
-#
-# This module provides generalized methods for performing operations that are
-# architecture specific.  Furthermore, the modules contained within this
-# module provide features that are specific to a given architecture.
-#
-###
-module Arch
-
-	#
-	# Architecture classes
-	#
-	require 'rex/arch/x86'
-	require 'rex/arch/sparc'
-
-	#
-	# This routine adjusts the stack pointer for a given architecture.
-	#
-	def self.adjust_stack_pointer(arch, adjustment)
-
-		if ( arch.is_a?(::Array))
-			arch = arch[0]
-		end
-
-		case arch
-			when /x86/
-				Rex::Arch::X86.adjust_reg(Rex::Arch::X86::ESP, adjustment)
-			else
-				nil
-		end
-	end
-
-	#
-	# This route provides address packing for the specified arch
-	#
-	def self.pack_addr(arch, addr)
-
-		if ( arch.is_a?(::Array))
-			arch = arch[0]
-		end
-
-		case arch
-			when ARCH_X86
-				[addr].pack('V')
-			when ARCH_X86_64
-				[addr].pack('Q')
-			when ARCH_MIPS # ambiguous
-				[addr].pack('N')
-			when ARCH_MIPSBE
-				[addr].pack('N')
-			when ARCH_MIPSLE
-				[addr].pack('V')
-			when ARCH_PPC  # ambiguous
-				[addr].pack('N')
-			when ARCH_SPARC
-				[addr].pack('N')
-			when ARCH_ARMLE
-				[addr].pack('V')
-			when ARCH_ARMBE
-				[addr].pack('N')
-		end
-	end
-
-	#
-	# This routine reports the endianess of a given architecture
-	#
-	def self.endian(arch)
-
-		if ( arch.is_a?(::Array))
-			arch = arch[0]
-		end
-
-		case arch
-			when ARCH_X86
-				return ENDIAN_LITTLE
-			when ARCH_X86_64
-				return ENDIAN_LITTLE
-			when ARCH_MIPS # ambiguous
-				return ENDIAN_BIG
-			when ARCH_MIPSLE
-				return ENDIAN_LITTLE
-			when ARCH_MIPSBE
-				return ENDIAN_BIG
-			when ARCH_PPC  # ambiguous
-				return ENDIAN_BIG
-			when ARCH_SPARC
-				return ENDIAN_BIG
-			when ARCH_ARMLE
-				return ENDIAN_LITTLE
-			when ARCH_ARMBE
-				return ENDIAN_BIG
-		end
-
-		return ENDIAN_LITTLE
-	end
-
-end
-end

data/lib/rex/arch/sparc.rb

@@ -1,75 +0,0 @@
-#!/usr/bin/env ruby
-
-module Rex
-module Arch
-
-#
-# Everything here is mostly stolen from vlad's perl sparc stuff
-#
-module Sparc
-
-	#
-	# Register number constants
-	#
-	RegisterNumber =
-		{
-			'g0' =>  0, 'g1' =>  1, 'g2' =>  2, 'g3' =>  3,
-			'g4' =>  4, 'g5' =>  5, 'g6' =>  6, 'g7' =>  7,
-			'o0' =>  8, 'o1' =>  9, 'o2' => 10, 'o3' => 11,
-			'o4' => 12, 'o5' => 13, 'o6' => 14, 'o7' => 15,
-			'l0' => 16, 'l1' => 17, 'l2' => 18, 'l3' => 19,
-			'l4' => 20, 'l5' => 21, 'l6' => 22, 'l7' => 23,
-			'i0' => 24, 'i1' => 25, 'i2' => 26, 'i3' => 27,
-			'i4' => 28, 'i5' => 29, 'i6' => 30, 'i7' => 31,
-			'sp' => 14, 'fp' => 30, 
-		} # :nodoc:
-
-	#
-	# Encodes a SETHI instruction with the value 'constant' being put into 'dst' register
-	#
-	def self.sethi(constant, dst) 
-		[ 
-		  (RegisterNumber[dst] << 25) | 
-		  (4 << 22) | 
-		  (constant >> 10)
-		].pack('N')
-	end
-
-	#
-	# Encodes an OR instruction with the value 'constant' being OR'ed with the 'src' register into the 'dst' register
-	#
-	def self.ori(src, constant, dst)
-		[ 
-		  (2 << 30) | 
-		  (RegisterNumber[dst] << 25) | 
-		  (2 << 19) | 
-		  (RegisterNumber[src] << 14) | 
-		  (1 << 13) | 
-		  (constant & 0x1fff)
-		].pack('N')
-	end
-
-	#
-	# Puts 'constant' into the 'dst' register using as few instructions as possible by checking the size of the value. 
-	# XXX: signedness support
-	#
-	def self.set(constant, dst)
-		if (constant <= 4095 and constant >= 0)
-			ori('g0', constant, dst)
-		elsif (constant & 0x3ff != 0)
-			set_dword(constant, dst)
-		else
-			sethi(constant, dst)
-		end
-	end
-
-	#
-	# Puts 'constant' into the 'dst' register using both sethi and ori (necessary to use both uncessarily in some cases with encoders)
-	#
-	def self.set_dword(constant, dst)
-		sethi(constant, dst) + ori(dst, constant & 0x3ff, dst)
-	end
-
-end
-
-end end

data/lib/rex/arch/sparc.rb.ut.rb

@@ -1,18 +0,0 @@
-#!/usr/bin/env ruby
-
-$:.unshift(File.join(File.dirname(__FILE__), '..', '..'))
-
-require 'test/unit'
-require 'rex/text'
-require 'rex/arch/sparc'
-
-class Rex::Arch::Sparc::UnitTest < ::Test::Unit::TestCase
-
-	Klass = Rex::Arch::Sparc
-
-	def test_set
-		assert_equal("\x88\x10\x20\x02", Klass.set(0x2, 'g4'))
-		assert_equal("\x09\x00\x00\x08\x88\x11\x22\x22", Klass.set(0x2222, 'g4'))
-	end
-
-end

data/lib/rex/arch/x86.rb

@@ -1,513 +0,0 @@
-#!/usr/bin/env ruby
-
-module Rex
-module Arch
-
-#
-# everything here is mostly stole from vlad's perl x86 stuff
-#
-
-module X86
-
-	#
-	# Register number constants
-	#
-	EAX = AL = AX = ES = 0
-	ECX = CL = CX = CS = 1
-	EDX = DL = DX = SS = 2
-	EBX = BL = BX = DS = 3
-	ESP = AH = SP = FS = 4
-	EBP = CH = BP = GS = 5
-	ESI = DH = SI =      6
-	EDI = BH = DI =      7
-
-	REG_NAMES32 = [ 'eax', 'ecx', 'edx', 'ebx',
-	                'esp', 'ebp', 'esi', 'edi' ] # :nodoc:
-
-	# Jump tp a specific register
-	def self.jmp_reg(str)
-		reg = reg_number(str)
-		_check_reg(reg)
-		"\xFF" + [224 + reg].pack('C')
-	end
-
-	# This method returns the opcodes that compose a jump instruction to the
-	# supplied relative offset.
-	def self.jmp(addr)
-		"\xe9" + pack_dword(rel_number(addr))
-	end
-
-	#
-	# This method adds/subs a packed long integer
-	#
-	def self.dword_adjust(dword, amount=0)
-		pack_dword(dword.unpack('V')[0] + amount)
-	end
-
-	#
-	# This method returns the opcodes that compose a tag-based search routine
-	#
-	def self.searcher(tag)
-		"\xbe" + dword_adjust(tag,-1)+  # mov esi, Tag - 1
-		"\x46" +                        # inc esi
-		"\x47" +                        # inc edi (end_search:)
-		"\x39\x37" +                    # cmp [edi],esi
-		"\x75\xfb" +                    # jnz 0xa (end_search)
-		"\x46" +                        # inc esi
-		"\x4f" +                        # dec edi (start_search:)
-		"\x39\x77\xfc" +                # cmp [edi-0x4],esi
-		"\x75\xfa" +                    # jnz 0x10 (start_search)
-		jmp_reg('edi')                  # jmp edi
-	end
-
-	#
-	# Generates a buffer that will copy memory immediately following the stub
-	# that is generated to be copied to the stack
-	#
-	def self.copy_to_stack(len)
-		# four byte align
-		len = (len + 3) & ~0x3
-
-		stub =
-			"\xeb\x0f"+                # jmp _end
-			push_dword(len)+           # push n
-			"\x59"+                    # pop ecx
-			"\x5e"+                    # pop esi
-			"\x29\xcc"+                # sub esp, ecx
-			"\x89\xe7"+                # mov edi, esp
-			"\xf3\xa4"+                # rep movsb
-			"\xff\xe4"+                # jmp esp
-			"\xe8\xec\xff\xff\xff"     # call _start
-
-		stub
-	end
-
-	#
-	# This method returns the opcodes that compose a short jump instruction to
-	# the supplied relative offset.
-	#
-	def self.jmp_short(addr)
-		"\xeb" + pack_lsb(rel_number(addr, -2))
-	end
-
-	#
-	# This method returns the opcodes that compose a relative call instruction
-	# to the address specified.
-	#
-	def self.call(addr)
-		"\xe8" + pack_dword(rel_number(addr, -5))
-	end
-
-	#
-	# This method returns a number offset to the supplied string.
-	#
-	def self.rel_number(num, delta = 0)
-		s = num.to_s
-
-		case s[0, 2]
-			when '$+'
-				num = s[2 .. -1].to_i
-			when '$-'
-				num = -1 * s[2 .. -1].to_i
-			when '0x'
-				num = s.hex
-			else
-				delta = 0
-		end
-
-		return num + delta
-	end
-
-	#
-	# This method returns the number associated with a named register.
-	#
-	def self.reg_number(str)
-		return self.const_get(str.upcase)
-	end
-
-	#
-	# This method returns the register named associated with a given register
-	# number.
-	#
-	def self.reg_name32(num)
-		_check_reg(num)
-		return REG_NAMES32[num].dup
-	end
-
-	#
-	# This method generates the encoded effective value for a register.
-	#
-	def self.encode_effective(shift, dst)
-		return (0xc0 | (shift << 3) | dst)
-	end
-
-	#
-	# This method generates the mod r/m character for a source and destination
-	# register.
-	#
-	def self.encode_modrm(dst, src)
-		_check_reg(dst, src)
-		return (0xc0 | src | dst << 3).chr
-	end
-
-	#
-	# This method generates a push byte instruction.
-	#
-	def self.push_byte(byte)
-		# push byte will sign extend...
-		if byte < 128 && byte >= -128
-			return "\x6a" + (byte & 0xff).chr
-		end
-		raise ::ArgumentError, "Can only take signed byte values!", caller()
-	end
-
-	#
-	# This method generates a push word instruction.
-	#
-	def self.push_word(val)
-		return "\x66\x68" + pack_word(val)
-	end
-
-	#
-	# This method generates a push dword instruction.
-	#
-	def self.push_dword(val)
-		return "\x68" + pack_dword(val)
-	end
-
-	#
-	# This method generates a pop dword instruction into a register.
-	#
-	def self.pop_dword(dst)
-		_check_reg(dst)
-		return (0x58 | dst).chr
-	end
-
-	#
-	# This method generates an instruction that clears the supplied register in
-	# a manner that attempts to avoid bad characters, if supplied.
-	#
-	def self.clear(reg, badchars = '')
-		_check_reg(reg)
-		return set(reg, 0, badchars)
-	end
-
-	#
-	# This method generates the opcodes that set the low byte of a given
-	# register to the supplied value.
-	#
-	def self.mov_byte(reg, val)
-		_check_reg(reg)
-		# chr will raise RangeError if val not between 0 .. 255
-		return (0xb0 | reg).chr + val.chr
-	end
-
-	#
-	# This method generates the opcodes that set the low word of a given
-	# register to the supplied value.
-	#
-	def self.mov_word(reg, val)
-		_check_reg(reg)
-		if val < 0 || val > 0xffff
-			raise RangeError, "Can only take unsigned word values!", caller()
-		end
-		return "\x66" + (0xb8 | reg).chr + pack_word(val)
-	end
-
-	#
-	# This method generates the opcodes that set the a register to the
-	# supplied value.
-	#
-	def self.mov_dword(reg, val)
-		_check_reg(reg)
-		return (0xb8 | reg).chr + pack_dword(val)
-	end
-
-	#
-	# This method is a general way of setting a register to a value.  Depending
-	# on the value supplied, different sets of instructions may be used.
-	#
-	# TODO: Make this moderatly intelligent so it chain instructions by itself
-		#   (ie. xor eax, eax + mov al, 4 + xchg ah, al)
-	def self.set(dst, val, badchars = '')
-		_check_reg(dst)
-
-		# If the value is 0 try xor/sub dst, dst (2 bytes)
-		if(val == 0)
-			opcodes = Rex::Text.remove_badchars("\x29\x2b\x31\x33", badchars)
-			if !opcodes.empty?
-				return opcodes[rand(opcodes.length)].chr + encode_modrm(dst, dst)
-			end
-# TODO: SHL/SHR
-# TODO: AND
-		end
-
-		# try push BYTE val; pop dst (3 bytes)
-		begin
-			return _check_badchars(push_byte(val) + pop_dword(dst), badchars)
-		rescue ::ArgumentError, ::RuntimeError, ::RangeError
-		end
-
-		# try clear dst, mov BYTE dst (4 bytes)
-		begin
-			# break if val == 0
-			return _check_badchars(clear(dst, badchars) + mov_byte(dst, val), badchars)
-		rescue ::ArgumentError, ::RuntimeError, ::RangeError
-		end
-
-		# try mov DWORD dst (5 bytes)
-		begin
-			return _check_badchars(mov_dword(dst, val), badchars)
-		rescue ::ArgumentError, ::RuntimeError, ::RangeError
-		end
-
-		# try push DWORD, pop dst (6 bytes)
-		begin
-			return _check_badchars(push_dword(val) + pop_dword(dst), badchars)
-		rescue ::ArgumentError, ::RuntimeError, ::RangeError
-		end
-
-		# try clear dst, mov WORD dst (6 bytes)
-		begin
-			# break if val == 0
-			return _check_badchars(clear(dst, badchars) + mov_word(dst, val), badchars)
-		rescue ::ArgumentError, ::RuntimeError, ::RangeError
-		end
-
-		raise RuntimeError, "No valid set instruction could be created!", caller()
-	end
-
-	#
-	# Builds a subtraction instruction using the supplied operand
-	# and register.
-	#
-	def self.sub(val, reg, badchars = '', add = false, adjust = false, bits = 0)
-		opcodes = []
-		shift   = (add == true) ? 0 : 5
-
-		if (bits <= 8 and val >= -0x7f and val <= 0x7f)
-			opcodes <<
-				((adjust) ? '' : clear(reg, badchars)) +
-				"\x83" +
-				[ encode_effective(shift, reg) ].pack('C') +
-				[ val.to_i ].pack('C')
-		end
-
-		if (bits <= 16 and val >= -0xffff and val <= 0)
-			opcodes <<
-				((adjust) ? '' : clear(reg, badchars)) +
-				"\x66\x81" +
-				[ encode_effective(shift, reg) ].pack('C') +
-				[ val.to_i ].pack('v')
-		end
-
-		opcodes <<
-			((adjust) ? '' : clear(reg, badchars)) +
-			"\x81" +
-			[ encode_effective(shift, reg) ].pack('C') +
-			[ val.to_i ].pack('V')
-
-		# Search for a compatible opcode
-		opcodes.each { |op|
-			begin
-				_check_badchars(op, badchars)
-			rescue
-				next
-			end
-
-			return op
-		}
-
-		if opcodes.empty?
-			raise RuntimeError, "Could not find a usable opcode", caller()
-		end
-	end
-
-	#
-	# This method generates the opcodes equivalent to subtracting with a
-	# negative value from a given register.
-	#
-	def self.add(val, reg, badchars = '', adjust = false, bits = 0)
-		sub(val, reg, badchars, true, adjust, bits)
-	end
-
-	#
-	# This method wrappers packing a short integer as a little-endian buffer.
-	#
-	def self.pack_word(num)
-		[num].pack('v')
-	end
-
-	#
-	# This method wrappers packing an integer as a little-endian buffer.
-	#
-	def self.pack_dword(num)
-		[num].pack('V')
-	end
-
-	#
-	# This method returns the least significant byte of a packed dword.
-	#
-	def self.pack_lsb(num)
-		pack_dword(num)[0,1]
-	end
-
-	#
-	# This method adjusts the value of the ESP register by a given amount.
-	#
-	def self.adjust_reg(reg, adjustment)
-		if (adjustment > 0)
-			sub(adjustment, reg, '', false, false, 32)
-		else
-			add(adjustment, reg, '', true, 32)
-		end
-	end
-
-	def self._check_reg(*regs) # :nodoc:
-		regs.each { |reg|
-			if reg > 7 || reg < 0
-				raise ArgumentError, "Invalid register #{reg}", caller()
-			end
-		}
-		return nil
-	end
-
-	def self._check_badchars(data, badchars) # :nodoc:
-		idx = Rex::Text.badchar_index(data, badchars)
-		if idx
-			raise RuntimeError, "Bad character at #{idx}", caller()
-		end
-		return data
-	end
-
-	#
-	# This method returns an array of 'safe' FPU instructions
-	#
-	def self.fpu_instructions
-		fpus = []
-
-		0xe8.upto(0xee) { |x| fpus << "\xd9" + x.chr }
-		0xc0.upto(0xcf) { |x| fpus << "\xd9" + x.chr }
-		0xc0.upto(0xdf) { |x| fpus << "\xda" + x.chr }
-		0xc0.upto(0xdf) { |x| fpus << "\xdb" + x.chr }
-		0xc0.upto(0xc7) { |x| fpus << "\xdd" + x.chr }
-
-		fpus << "\xd9\xd0"
-		fpus << "\xd9\xe1"
-		fpus << "\xd9\xf6"
-		fpus << "\xd9\xf7"
-		fpus << "\xd9\xe5"
-
-		# This FPU instruction seems to fail consistently on Linux
-		#fpus << "\xdb\xe1"
-
-		fpus
-	end
-
-	#
-	# This method returns an array containing a geteip stub, a register, and an offset
-	# This method will return nil if the getip generation fails
-	#
-	def self.geteip_fpu(badchars)
-
-		#
-		# Default badchars to an empty string
-		#
-		badchars ||= ''
-
-		#
-		# Bail out early if D9 is restricted
-		#
-		return nil if badchars.index("\xd9")
-
-		#
-		# Create a list of FPU instructions
-		#
-		fpus = *self.fpu_instructions
-		bads = []
-		badchars.each_byte  do |c|
-			fpus.each do |str|
-				bads << str if (str.index(c.chr))
-			end
-		end
-		bads.each { |str| fpus.delete(str) }
-		return nil if fpus.length == 0
-
-		#
-		# Create a list of registers to use for fnstenv
-		#
-		dsts = []
-		0.upto(7) do |c|
-			dsts << c if (not badchars.index( (0x70+c).chr ))
-		end
-
-		if (dsts.include?(ESP) and badchars.index("\x24"))
-			dsts.delete(ESP)
-		end
-
-		return nil if dsts.length == 0
-
-		#
-		# Grab a random FPU instruction
-		#
-		fpu = fpus[ rand(fpus.length) ]
-
-		#
-		# Grab a random register from dst
-		#
-		while(dsts.length > 0)
-			buf = ''
-			dst = dsts[ rand(dsts.length) ]
-			dsts.delete(dst)
-
-			# If the register is not ESP, copy ESP
-			if (dst != ESP)
-				next if badchars.index( (0x70 + dst).chr )
-
-				if !(badchars.index("\x89") or badchars.index( (0xE0+dst).chr ))
-					buf << "\x89" + (0xE0 + dst).chr
-				else
-					next if badchars.index("\x54")
-					next if badchars.index( (0x58+dst).chr )
-					buf << "\x54" + (0x58 + dst).chr
-				end
-			end
-
-			pad = 0
-			while (pad < (128-12) and badchars.index( (256-12-pad).chr))
-				pad += 4
-			end
-
-			# Give up on finding a value to use here
-			if (pad == (128-12))
-				return nil
-			end
-
-			out = buf + fpu + "\xd9" + (0x70 + dst).chr
-			out << "\x24" if dst == ESP
-			out << (256-12-pad).chr
-
-			regs = [*(0..7)]
-			while (regs.length > 0)
-				reg = regs[ rand(regs.length) ]
-				regs.delete(reg)
-				next if reg == ESP
-				next if badchars.index( (0x58 + reg).chr )
-
-				# Pop the value back out
-				0.upto(pad / 4) { |c| out << (0x58 + reg).chr }
-
-				# Fix the value to point to self
-				gap = out.length - buf.length
-
-				return [out, REG_NAMES32[reg].upcase, gap]
-			end
-		end
-
-		return nil
-	end
-
-end
-
-end end
-