librex 0.0.13 → 0.0.15

data/lib/rex/post/meterpreter/packet_dispatcher.rb

@@ -1,431 +0,0 @@
-#!/usr/bin/env ruby
-
-require 'rex/post/meterpreter/packet_response_waiter'
-require 'rex/logging'
-require 'rex/exceptions'
-
-module Rex
-module Post
-module Meterpreter
-
-###
-#
-# Exception thrown when a request fails.
-#
-###
-class RequestError < ArgumentError
-	def initialize(method, einfo, ecode=nil)
-		@method = method
-		@result = einfo
-		@code   = ecode || einfo
-	end
-
-	def to_s
-		"#{@method}: Operation failed: #{@result}"
-	end
-
-	# The method that failed.
-	attr_reader :method
-
-	# The error result that occurred, typically a windows error message.
-	attr_reader :result
-	
-	# The error result that occurred, typically a windows error code.
-	attr_reader :code	
-end
-
-###
-#
-# Handles packet transmission, reception, and correlation,
-# and processing
-#
-###
-module PacketDispatcher
-
-	PacketTimeout = 600
-
-	##
-	#
-	# Transmission
-	#
-	##
-
-	#
-	# Sends a packet without waiting for a response.
-	#
-	def send_packet(packet, completion_routine = nil, completion_param = nil)
-		if (completion_routine)
-			add_response_waiter(packet, completion_routine, completion_param)
-		end
-
-		bytes = 0
-		raw   = packet.to_r
-
-		if (raw)
-			begin
-				bytes = self.sock.write(raw)
-			rescue ::Exception => e
-				# Mark the session itself as dead
-				self.alive = false
-				
-				# Indicate that the dispatcher should shut down too
-				@finish = true
-				
-				# Reraise the error to the top-level caller
-				raise e		
-			end
-		end
-
-		return bytes
-	end
-
-	#
-	# Sends a packet and waits for a timeout for the given time interval.
-	#
-	def send_request(packet, t = self.response_timeout)
-		
-		if not t
-			send_packet(packet)
-			return nil
-		end
-	
-		response = send_packet_wait_response(packet, t)
-
-		if (response == nil)
-			raise TimeoutError.new("Send timed out")
-		elsif (response.result != 0)
-			einfo = lookup_error(response.result)
-			e = RequestError.new(packet.method, einfo, response.result)
-
-			e.set_backtrace(caller)
-
-			raise e
-		end
-
-		return response
-	end
-
-	#
-	# Transmits a packet and waits for a response.
-	#
-	def send_packet_wait_response(packet, t)
-		# First, add the waiter association for the supplied packet
-		waiter = add_response_waiter(packet)
-
-		# Transmit the packet
-		if (send_packet(packet) <= 0)
-			# Remove the waiter if we failed to send the packet.
-			remove_response_waiter(waiter)
-			return nil
-		end
-
-		# Wait for the supplied time interval
-		waiter.wait(t)
-
-		# Remove the waiter from the list of waiters in case it wasn't
-		# removed
-		remove_response_waiter(waiter)
-
-		# Return the response packet, if any
-		return waiter.response
-	end
-
-	##
-	#
-	# Reception
-	#
-	##
-	#
-	# Monitors the PacketDispatcher's sock for data in its own
-	# thread context and parsers all inbound packets.
-	#
-	def monitor_socket
-		self.waiters = []
-
-		@pqueue = []
-		@finish = false
-		@last_recvd = Time.now
-		@ping_sent = false
-
-		self.alive = true
-
-		# Spawn a thread for receiving packets
-		self.receiver_thread = Rex::ThreadFactory.spawn("MeterpreterReceiver", false) do
-			while (self.alive)
-				begin
-					rv = Rex::ThreadSafe.select([ self.sock.fd ], nil, nil, 0.25)
-					ping_time = 60
-					# If there's nothing to read, and it's been awhile since we
-					# saw a packet, we need to send a ping.  We wait
-					# ping_time*2 seconds before deciding a session is dead.
-					if (not rv and self.send_keepalives and Time.now - @last_recvd > ping_time)
-						# If the queue is empty and we've already sent a
-						# keepalive without getting a reply, then this
-						# session is hosed, and we should give up on it.
-						if @ping_sent and @pqueue.empty? and (Time.now - @last_recvd > ping_time * 2)
-							dlog("No response to ping, session #{self.sid} is dead", LEV_3)
-							self.alive = false
-							@finish = true
-							break
-						end
-						# Let the packet queue processor finish up before
-						# we send a ping.
-						if not @ping_sent and @pqueue.empty?
-							# Our 'ping' is actually just a check for eof on
-							# channel id 0.  This method has no side effects
-							# and always returns an answer (regardless of the
-							# existence of chan 0), which is all that's
-							# needed for a liveness check.  The answer itself
-							# is unimportant and is ignored.
-							pkt = Packet.create_request('core_channel_eof')
-							pkt.add_tlv(TLV_TYPE_CHANNEL_ID, 0)
-							waiter = Proc.new { |response, param|
-									@ping_sent = false
-									@last_recvd = Time.now
-								}
-							send_packet(pkt, waiter)
-							@ping_sent = true
-						end
-						next
-					end
-					next if not rv
-					packet = receive_packet
-					@pqueue << packet if packet
-					@last_recvd = Time.now
-				rescue ::Exception
-					dlog("Exception caught in monitor_socket: #{$!}", 'meterpreter', LEV_1)
-					@finish = true
-					self.alive = false
-					break
-				end
-			end
-		end
-
-		# Spawn a new thread that monitors the socket
-		self.dispatcher_thread = Rex::ThreadFactory.spawn("MeterpreterDispatcher", false) do
-			begin
-			# Whether we're finished or not is determined by the receiver
-			# thread above.
-			while(not @finish)
-				if(@pqueue.empty?)
-					::IO.select(nil, nil, nil, 0.10)
-					next
-				end
-
-				incomplete = []
-				backlog    = []
-
-				while(@pqueue.length > 0)
-					backlog << @pqueue.shift
-				end
-
-				#
-				# Prioritize message processing here
-				# 1. Close should always be processed at the end
-				# 2. Command responses always before channel data
-				#
-
-				tmp_command = []
-				tmp_channel = []
-				tmp_close   = []
-				backlog.each do |pkt|
-					if(pkt.response?)
-						tmp_command << pkt
-						next
-					end
-					if(pkt.method == "core_channel_close")
-						tmp_close << pkt
-						next
-					end
-					tmp_channel << pkt
-				end
-
-				backlog = []
-				backlog.push(*tmp_command)
-				backlog.push(*tmp_channel)
-				backlog.push(*tmp_close)
-
-
-				#
-				# Process the message queue
-				#
-
-				backlog.each do |pkt|
-
-					begin
-					if ! dispatch_inbound_packet(pkt)
-						# Only requeue packets newer than the timeout
-						if (::Time.now.to_i - pkt.created_at.to_i < PacketTimeout)
-							incomplete << pkt
-						end
-					end
-
-					rescue ::Exception => e
-						dlog("Dispatching exception with packet #{pkt}: #{e} #{e.backtrace}", 'meterpreter', LEV_1)
-					end
-				end
-
-				@pqueue.unshift(*incomplete)
-
-				if(@pqueue.length > 100)
-					dlog("Backlog has grown to over 100 in monitor_socket, dropping older packets: #{@pqueue[0 .. 25].map{|x| x.inspect}.join(" - ")}", 'meterpreter', LEV_1)
-					@pqueue = @pqueue[25 .. 100]
-				end
-			end
-			rescue ::Exception => e
-				dlog("Exception caught in monitor_socket dispatcher: #{e.class} #{e} #{e.backtrace}", 'meterpreter', LEV_1)
-			ensure
-				self.receiver_thread.kill if self.receiver_thread
-			end
-		end
-	end
-
-
-	#
-	# Parses data from the dispatcher's sock and returns a Packet context
-	# once a full packet has been received.
-	#
-	def receive_packet
-		return parser.recv(self.sock)
-	end
-
-	#
-	# Stop the monitor
-	#
-	def monitor_stop
-		if(self.receiver_thread)
-			self.receiver_thread.kill
-			self.receiver_thread = nil
-		end
-		if(self.dispatcher_thread)
-			self.dispatcher_thread.kill
-			self.dispatcher_thread = nil
-		end
-	end
-
-	##
-	#
-	# Waiter registration
-	#
-	##
-
-	#
-	# Adds a waiter association with the supplied request packet.
-	#
-	def add_response_waiter(request, completion_routine = nil, completion_param = nil)
-		waiter = PacketResponseWaiter.new(request.rid, completion_routine, completion_param)
-
-		self.waiters << waiter
-
-		return waiter
-	end
-
-	#
-	# Notifies a whomever is waiting for a the supplied response,
-	# if anyone.
-	#
-	def notify_response_waiter(response)
-		self.waiters.each() { |waiter|
-			if (waiter.waiting_for?(response))
-				waiter.notify(response)
-
-				remove_response_waiter(waiter)
-
-				break
-			end
-		}
-	end
-
-	#
-	# Removes a waiter from the list of waiters.
-	#
-	def remove_response_waiter(waiter)
-		self.waiters.delete(waiter)
-	end
-
-	##
-	#
-	# Dispatching
-	#
-	##
-
-	#
-	# Initializes the inbound handlers.
-	#
-	def initialize_inbound_handlers
-		@inbound_handlers = []
-	end
-
-	#
-	# Dispatches and processes an inbound packet.  If the packet is a
-	# response that has an associated waiter, the waiter is notified.
-	# Otherwise, the packet is passed onto any registered dispatch
-	# handlers until one returns success.
-	#
-	def dispatch_inbound_packet(packet, client = nil)
-		handled = false
-
-		# If no client context was provided, return self as PacketDispatcher
-		# is a mixin for the Client instance
-		if (client == nil)
-			client = self
-		end
-
-		# If the packet is a response, try to notify any potential
-		# waiters
-		if ((resp = packet.response?))
-			if (notify_response_waiter(packet))
-				return true
-			end
-		end
-
-
-		# Enumerate all of the inbound packet handlers until one handles
-		# the packet
-		@inbound_handlers.each { |handler|
-
-			handled = nil
-			begin
-
-			if ! resp
-				handled = handler.request_handler(client, packet)
-			else
-				handled = handler.response_handler(client, packet)
-			end
-
-			rescue ::Exception => e
-				dlog("Exception caught in dispatch_inbound_packet: handler=#{handler} #{e.class} #{e} #{e.backtrace}", 'meterpreter', LEV_1)
-				return true
-			end
-
-			if (handled)
-				break
-			end
-		}
-		return handled
-	end
-
-	#
-	# Registers an inbound packet handler that implements the
-	# InboundPacketHandler interface.
-	#
-	def register_inbound_handler(handler)
-		@inbound_handlers << handler
-	end
-
-	#
-	# Deregisters a previously registered inbound packet handler.
-	#
-	def deregister_inbound_handler(handler)
-		@inbound_handlers.delete(handler)
-	end
-
-protected
-
-	attr_accessor :receiver_thread # :nodoc:
-	attr_accessor :dispatcher_thread # :nodoc:
-	attr_accessor :waiters # :nodoc:
-end
-
-end; end; end
-

data/lib/rex/post/meterpreter/packet_parser.rb

@@ -1,94 +0,0 @@
-#!/usr/bin/env ruby
-
-module Rex
-module Post
-module Meterpreter
-
-###
-#
-# This class is responsible for reading in and decrypting meterpreter
-# packets that arrive on a socket
-#
-###
-class PacketParser
-
-	#
-	# Initializes the packet parser context with an optional cipher.
-	#
-	def initialize(cipher = nil)
-		self.cipher = cipher
-
-		reset
-	end
-
-	#
-	# Resets the parser state so that a new packet can begin being parsed.
-	#
-	def reset
-		self.raw = ''
-		self.hdr_length_left = 8
-		self.payload_length_left = 0
-	end
-
-	#
-	# Reads data from the wire and parse as much of the packet as possible.
-	#
-	def recv(sock)
-		if (self.hdr_length_left > 0)
-			buf = sock.read(self.hdr_length_left)
-
-			if (buf)
-				self.raw << buf
-
-				self.hdr_length_left -= buf.length
-			else
-				raise EOFError
-			end
-
-			# If we've finished reading the header, set the
-			# payload length left to the number of bytes
-			# specified in the length
-			if (self.hdr_length_left == 0)
-				self.payload_length_left = raw.unpack("N")[0] - 8
-			end
-		elsif (self.payload_length_left > 0)
-			buf = sock.read(self.payload_length_left)
-
-			if (buf)
-				self.raw << buf
-
-				self.payload_length_left -= buf.length
-			else
-				raise EOFError
-			end
-		end
-
-		# If we've finished reading the entire packet
-		if ((self.hdr_length_left == 0) &&
-		    (self.payload_length_left == 0))
-
-			# Create a typeless packet
-			packet = Packet.new(0)
-
-			# TODO: cipher decryption
-			if (cipher)
-			end
-
-			# Serialize the packet from the raw buffer
-			packet.from_r(self.raw)
-
-			# Reset our state
-			reset
-
-			return packet
-		end
-	end
-
-protected
-	attr_accessor :cipher, :raw, :hdr_length_left, :payload_length_left  # :nodoc:
-
-end
-
-
-end; end; end
-