libarchive-static 1.0.0

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
Files changed (157) hide show
  1. data/ext/Makefile +6 -0
  2. data/ext/extconf.rb +61 -0
  3. data/ext/libarchive-0.1.1/COPYING.libarchive +60 -0
  4. data/ext/libarchive-0.1.1/LICENSE.libbzip2 +42 -0
  5. data/ext/libarchive-0.1.1/README.txt +143 -0
  6. data/ext/libarchive-0.1.1/ext/Makefile.in +0 -0
  7. data/ext/libarchive-0.1.1/ext/archive_read_support_compression.c +31 -0
  8. data/ext/libarchive-0.1.1/ext/archive_read_support_compression.h +6 -0
  9. data/ext/libarchive-0.1.1/ext/archive_read_support_format.c +32 -0
  10. data/ext/libarchive-0.1.1/ext/archive_read_support_format.h +6 -0
  11. data/ext/libarchive-0.1.1/ext/archive_write_open_rb_str.c +29 -0
  12. data/ext/libarchive-0.1.1/ext/archive_write_open_rb_str.h +6 -0
  13. data/ext/libarchive-0.1.1/ext/archive_write_set_compression.c +32 -0
  14. data/ext/libarchive-0.1.1/ext/archive_write_set_compression.h +6 -0
  15. data/ext/libarchive-0.1.1/ext/config.h.in +22 -0
  16. data/ext/libarchive-0.1.1/ext/configure +3904 -0
  17. data/ext/libarchive-0.1.1/ext/configure.in +11 -0
  18. data/ext/libarchive-0.1.1/ext/depend +19 -0
  19. data/ext/libarchive-0.1.1/ext/extconf.rb +6 -0
  20. data/ext/libarchive-0.1.1/ext/install-sh +250 -0
  21. data/ext/libarchive-0.1.1/ext/libarchive.c +89 -0
  22. data/ext/libarchive-0.1.1/ext/libarchive_archive.c +84 -0
  23. data/ext/libarchive-0.1.1/ext/libarchive_entry.c +1015 -0
  24. data/ext/libarchive-0.1.1/ext/libarchive_internal.h +155 -0
  25. data/ext/libarchive-0.1.1/ext/libarchive_reader.c +328 -0
  26. data/ext/libarchive-0.1.1/ext/libarchive_win32.h +52 -0
  27. data/ext/libarchive-0.1.1/ext/libarchive_writer.c +246 -0
  28. data/ext/libarchive-0.1.1/libarchive.c +1762 -0
  29. data/ext/libarchive-2.8.4/Makefile.in +7076 -0
  30. data/ext/libarchive-2.8.4/build/autoconf/check_stdcall_func.m4 +51 -0
  31. data/ext/libarchive-2.8.4/build/autoconf/compile +143 -0
  32. data/ext/libarchive-2.8.4/build/autoconf/config.guess +1502 -0
  33. data/ext/libarchive-2.8.4/build/autoconf/config.sub +1708 -0
  34. data/ext/libarchive-2.8.4/build/autoconf/depcomp +630 -0
  35. data/ext/libarchive-2.8.4/build/autoconf/install-sh +291 -0
  36. data/ext/libarchive-2.8.4/build/autoconf/la_uid_t.m4 +20 -0
  37. data/ext/libarchive-2.8.4/build/autoconf/ltmain.sh +8406 -0
  38. data/ext/libarchive-2.8.4/build/autoconf/missing +376 -0
  39. data/ext/libarchive-2.8.4/build/pkgconfig/libarchive.pc.in +10 -0
  40. data/ext/libarchive-2.8.4/config.h.in +772 -0
  41. data/ext/libarchive-2.8.4/configure +17916 -0
  42. data/ext/libarchive-2.8.4/libarchive/archive.h +741 -0
  43. data/ext/libarchive-2.8.4/libarchive/archive_check_magic.c +134 -0
  44. data/ext/libarchive-2.8.4/libarchive/archive_crc32.h +66 -0
  45. data/ext/libarchive-2.8.4/libarchive/archive_endian.h +162 -0
  46. data/ext/libarchive-2.8.4/libarchive/archive_entry.c +2202 -0
  47. data/ext/libarchive-2.8.4/libarchive/archive_entry.h +524 -0
  48. data/ext/libarchive-2.8.4/libarchive/archive_entry_copy_bhfi.c +74 -0
  49. data/ext/libarchive-2.8.4/libarchive/archive_entry_copy_stat.c +77 -0
  50. data/ext/libarchive-2.8.4/libarchive/archive_entry_link_resolver.c +405 -0
  51. data/ext/libarchive-2.8.4/libarchive/archive_entry_private.h +184 -0
  52. data/ext/libarchive-2.8.4/libarchive/archive_entry_stat.c +118 -0
  53. data/ext/libarchive-2.8.4/libarchive/archive_entry_strmode.c +87 -0
  54. data/ext/libarchive-2.8.4/libarchive/archive_entry_xattr.c +158 -0
  55. data/ext/libarchive-2.8.4/libarchive/archive_hash.h +281 -0
  56. data/ext/libarchive-2.8.4/libarchive/archive_platform.h +165 -0
  57. data/ext/libarchive-2.8.4/libarchive/archive_private.h +124 -0
  58. data/ext/libarchive-2.8.4/libarchive/archive_read.c +1249 -0
  59. data/ext/libarchive-2.8.4/libarchive/archive_read_data_into_fd.c +93 -0
  60. data/ext/libarchive-2.8.4/libarchive/archive_read_disk.c +198 -0
  61. data/ext/libarchive-2.8.4/libarchive/archive_read_disk_entry_from_file.c +570 -0
  62. data/ext/libarchive-2.8.4/libarchive/archive_read_disk_private.h +62 -0
  63. data/ext/libarchive-2.8.4/libarchive/archive_read_disk_set_standard_lookup.c +303 -0
  64. data/ext/libarchive-2.8.4/libarchive/archive_read_extract.c +182 -0
  65. data/ext/libarchive-2.8.4/libarchive/archive_read_open_fd.c +190 -0
  66. data/ext/libarchive-2.8.4/libarchive/archive_read_open_file.c +165 -0
  67. data/ext/libarchive-2.8.4/libarchive/archive_read_open_filename.c +272 -0
  68. data/ext/libarchive-2.8.4/libarchive/archive_read_open_memory.c +156 -0
  69. data/ext/libarchive-2.8.4/libarchive/archive_read_private.h +199 -0
  70. data/ext/libarchive-2.8.4/libarchive/archive_read_support_compression_all.c +60 -0
  71. data/ext/libarchive-2.8.4/libarchive/archive_read_support_compression_bzip2.c +353 -0
  72. data/ext/libarchive-2.8.4/libarchive/archive_read_support_compression_compress.c +444 -0
  73. data/ext/libarchive-2.8.4/libarchive/archive_read_support_compression_gzip.c +465 -0
  74. data/ext/libarchive-2.8.4/libarchive/archive_read_support_compression_none.c +40 -0
  75. data/ext/libarchive-2.8.4/libarchive/archive_read_support_compression_program.c +459 -0
  76. data/ext/libarchive-2.8.4/libarchive/archive_read_support_compression_rpm.c +287 -0
  77. data/ext/libarchive-2.8.4/libarchive/archive_read_support_compression_uu.c +627 -0
  78. data/ext/libarchive-2.8.4/libarchive/archive_read_support_compression_xz.c +708 -0
  79. data/ext/libarchive-2.8.4/libarchive/archive_read_support_format_all.c +43 -0
  80. data/ext/libarchive-2.8.4/libarchive/archive_read_support_format_ar.c +584 -0
  81. data/ext/libarchive-2.8.4/libarchive/archive_read_support_format_cpio.c +777 -0
  82. data/ext/libarchive-2.8.4/libarchive/archive_read_support_format_empty.c +93 -0
  83. data/ext/libarchive-2.8.4/libarchive/archive_read_support_format_iso9660.c +2830 -0
  84. data/ext/libarchive-2.8.4/libarchive/archive_read_support_format_mtree.c +1304 -0
  85. data/ext/libarchive-2.8.4/libarchive/archive_read_support_format_raw.c +185 -0
  86. data/ext/libarchive-2.8.4/libarchive/archive_read_support_format_tar.c +2418 -0
  87. data/ext/libarchive-2.8.4/libarchive/archive_read_support_format_xar.c +3151 -0
  88. data/ext/libarchive-2.8.4/libarchive/archive_read_support_format_zip.c +903 -0
  89. data/ext/libarchive-2.8.4/libarchive/archive_string.c +453 -0
  90. data/ext/libarchive-2.8.4/libarchive/archive_string.h +148 -0
  91. data/ext/libarchive-2.8.4/libarchive/archive_string_sprintf.c +164 -0
  92. data/ext/libarchive-2.8.4/libarchive/archive_util.c +391 -0
  93. data/ext/libarchive-2.8.4/libarchive/archive_virtual.c +94 -0
  94. data/ext/libarchive-2.8.4/libarchive/archive_windows.c +1236 -0
  95. data/ext/libarchive-2.8.4/libarchive/archive_windows.h +347 -0
  96. data/ext/libarchive-2.8.4/libarchive/archive_write.c +466 -0
  97. data/ext/libarchive-2.8.4/libarchive/archive_write_disk.c +2628 -0
  98. data/ext/libarchive-2.8.4/libarchive/archive_write_disk_private.h +38 -0
  99. data/ext/libarchive-2.8.4/libarchive/archive_write_disk_set_standard_lookup.c +262 -0
  100. data/ext/libarchive-2.8.4/libarchive/archive_write_open_fd.c +141 -0
  101. data/ext/libarchive-2.8.4/libarchive/archive_write_open_file.c +105 -0
  102. data/ext/libarchive-2.8.4/libarchive/archive_write_open_filename.c +162 -0
  103. data/ext/libarchive-2.8.4/libarchive/archive_write_open_memory.c +126 -0
  104. data/ext/libarchive-2.8.4/libarchive/archive_write_private.h +122 -0
  105. data/ext/libarchive-2.8.4/libarchive/archive_write_set_compression_bzip2.c +408 -0
  106. data/ext/libarchive-2.8.4/libarchive/archive_write_set_compression_compress.c +492 -0
  107. data/ext/libarchive-2.8.4/libarchive/archive_write_set_compression_gzip.c +477 -0
  108. data/ext/libarchive-2.8.4/libarchive/archive_write_set_compression_none.c +257 -0
  109. data/ext/libarchive-2.8.4/libarchive/archive_write_set_compression_program.c +347 -0
  110. data/ext/libarchive-2.8.4/libarchive/archive_write_set_compression_xz.c +438 -0
  111. data/ext/libarchive-2.8.4/libarchive/archive_write_set_format.c +72 -0
  112. data/ext/libarchive-2.8.4/libarchive/archive_write_set_format_ar.c +550 -0
  113. data/ext/libarchive-2.8.4/libarchive/archive_write_set_format_by_name.c +76 -0
  114. data/ext/libarchive-2.8.4/libarchive/archive_write_set_format_cpio.c +344 -0
  115. data/ext/libarchive-2.8.4/libarchive/archive_write_set_format_cpio_newc.c +295 -0
  116. data/ext/libarchive-2.8.4/libarchive/archive_write_set_format_mtree.c +1050 -0
  117. data/ext/libarchive-2.8.4/libarchive/archive_write_set_format_pax.c +1386 -0
  118. data/ext/libarchive-2.8.4/libarchive/archive_write_set_format_shar.c +626 -0
  119. data/ext/libarchive-2.8.4/libarchive/archive_write_set_format_ustar.c +587 -0
  120. data/ext/libarchive-2.8.4/libarchive/archive_write_set_format_zip.c +667 -0
  121. data/ext/libarchive-2.8.4/libarchive/config_freebsd.h +154 -0
  122. data/ext/libarchive-2.8.4/libarchive/filter_fork.c +161 -0
  123. data/ext/libarchive-2.8.4/libarchive/filter_fork.h +41 -0
  124. data/ext/libarchive-2.8.4/libarchive/filter_fork_windows.c +113 -0
  125. data/ext/libarchive-static-makefile +80 -0
  126. data/ext/libarchive-static-wrapper-makefile +22 -0
  127. data/ext/zlib-1.2.5/Makefile.in +257 -0
  128. data/ext/zlib-1.2.5/adler32.c +169 -0
  129. data/ext/zlib-1.2.5/compress.c +80 -0
  130. data/ext/zlib-1.2.5/configure +596 -0
  131. data/ext/zlib-1.2.5/crc32.c +442 -0
  132. data/ext/zlib-1.2.5/crc32.h +441 -0
  133. data/ext/zlib-1.2.5/deflate.c +1834 -0
  134. data/ext/zlib-1.2.5/deflate.h +342 -0
  135. data/ext/zlib-1.2.5/example.c +565 -0
  136. data/ext/zlib-1.2.5/gzclose.c +25 -0
  137. data/ext/zlib-1.2.5/gzguts.h +132 -0
  138. data/ext/zlib-1.2.5/gzlib.c +537 -0
  139. data/ext/zlib-1.2.5/gzread.c +653 -0
  140. data/ext/zlib-1.2.5/gzwrite.c +531 -0
  141. data/ext/zlib-1.2.5/infback.c +632 -0
  142. data/ext/zlib-1.2.5/inffast.c +340 -0
  143. data/ext/zlib-1.2.5/inffast.h +11 -0
  144. data/ext/zlib-1.2.5/inffixed.h +94 -0
  145. data/ext/zlib-1.2.5/inflate.c +1480 -0
  146. data/ext/zlib-1.2.5/inflate.h +122 -0
  147. data/ext/zlib-1.2.5/inftrees.c +330 -0
  148. data/ext/zlib-1.2.5/inftrees.h +62 -0
  149. data/ext/zlib-1.2.5/minigzip.c +440 -0
  150. data/ext/zlib-1.2.5/trees.c +1244 -0
  151. data/ext/zlib-1.2.5/trees.h +128 -0
  152. data/ext/zlib-1.2.5/uncompr.c +59 -0
  153. data/ext/zlib-1.2.5/zconf.h +428 -0
  154. data/ext/zlib-1.2.5/zlib.h +1613 -0
  155. data/ext/zlib-1.2.5/zutil.c +318 -0
  156. data/ext/zlib-1.2.5/zutil.h +274 -0
  157. metadata +211 -0
@@ -0,0 +1,1834 @@
1
+ /* deflate.c -- compress data using the deflation algorithm
2
+ * Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
3
+ * For conditions of distribution and use, see copyright notice in zlib.h
4
+ */
5
+
6
+ /*
7
+ * ALGORITHM
8
+ *
9
+ * The "deflation" process depends on being able to identify portions
10
+ * of the input text which are identical to earlier input (within a
11
+ * sliding window trailing behind the input currently being processed).
12
+ *
13
+ * The most straightforward technique turns out to be the fastest for
14
+ * most input files: try all possible matches and select the longest.
15
+ * The key feature of this algorithm is that insertions into the string
16
+ * dictionary are very simple and thus fast, and deletions are avoided
17
+ * completely. Insertions are performed at each input character, whereas
18
+ * string matches are performed only when the previous match ends. So it
19
+ * is preferable to spend more time in matches to allow very fast string
20
+ * insertions and avoid deletions. The matching algorithm for small
21
+ * strings is inspired from that of Rabin & Karp. A brute force approach
22
+ * is used to find longer strings when a small match has been found.
23
+ * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
24
+ * (by Leonid Broukhis).
25
+ * A previous version of this file used a more sophisticated algorithm
26
+ * (by Fiala and Greene) which is guaranteed to run in linear amortized
27
+ * time, but has a larger average cost, uses more memory and is patented.
28
+ * However the F&G algorithm may be faster for some highly redundant
29
+ * files if the parameter max_chain_length (described below) is too large.
30
+ *
31
+ * ACKNOWLEDGEMENTS
32
+ *
33
+ * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
34
+ * I found it in 'freeze' written by Leonid Broukhis.
35
+ * Thanks to many people for bug reports and testing.
36
+ *
37
+ * REFERENCES
38
+ *
39
+ * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
40
+ * Available in http://www.ietf.org/rfc/rfc1951.txt
41
+ *
42
+ * A description of the Rabin and Karp algorithm is given in the book
43
+ * "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
44
+ *
45
+ * Fiala,E.R., and Greene,D.H.
46
+ * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
47
+ *
48
+ */
49
+
50
+ /* @(#) $Id$ */
51
+
52
+ #include "deflate.h"
53
+
54
+ const char deflate_copyright[] =
55
+ " deflate 1.2.5 Copyright 1995-2010 Jean-loup Gailly and Mark Adler ";
56
+ /*
57
+ If you use the zlib library in a product, an acknowledgment is welcome
58
+ in the documentation of your product. If for some reason you cannot
59
+ include such an acknowledgment, I would appreciate that you keep this
60
+ copyright string in the executable of your product.
61
+ */
62
+
63
+ /* ===========================================================================
64
+ * Function prototypes.
65
+ */
66
+ typedef enum {
67
+ need_more, /* block not completed, need more input or more output */
68
+ block_done, /* block flush performed */
69
+ finish_started, /* finish started, need only more output at next deflate */
70
+ finish_done /* finish done, accept no more input or output */
71
+ } block_state;
72
+
73
+ typedef block_state (*compress_func) OF((deflate_state *s, int flush));
74
+ /* Compression function. Returns the block state after the call. */
75
+
76
+ local void fill_window OF((deflate_state *s));
77
+ local block_state deflate_stored OF((deflate_state *s, int flush));
78
+ local block_state deflate_fast OF((deflate_state *s, int flush));
79
+ #ifndef FASTEST
80
+ local block_state deflate_slow OF((deflate_state *s, int flush));
81
+ #endif
82
+ local block_state deflate_rle OF((deflate_state *s, int flush));
83
+ local block_state deflate_huff OF((deflate_state *s, int flush));
84
+ local void lm_init OF((deflate_state *s));
85
+ local void putShortMSB OF((deflate_state *s, uInt b));
86
+ local void flush_pending OF((z_streamp strm));
87
+ local int read_buf OF((z_streamp strm, Bytef *buf, unsigned size));
88
+ #ifdef ASMV
89
+ void match_init OF((void)); /* asm code initialization */
90
+ uInt longest_match OF((deflate_state *s, IPos cur_match));
91
+ #else
92
+ local uInt longest_match OF((deflate_state *s, IPos cur_match));
93
+ #endif
94
+
95
+ #ifdef DEBUG
96
+ local void check_match OF((deflate_state *s, IPos start, IPos match,
97
+ int length));
98
+ #endif
99
+
100
+ /* ===========================================================================
101
+ * Local data
102
+ */
103
+
104
+ #define NIL 0
105
+ /* Tail of hash chains */
106
+
107
+ #ifndef TOO_FAR
108
+ # define TOO_FAR 4096
109
+ #endif
110
+ /* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
111
+
112
+ /* Values for max_lazy_match, good_match and max_chain_length, depending on
113
+ * the desired pack level (0..9). The values given below have been tuned to
114
+ * exclude worst case performance for pathological files. Better values may be
115
+ * found for specific files.
116
+ */
117
+ typedef struct config_s {
118
+ ush good_length; /* reduce lazy search above this match length */
119
+ ush max_lazy; /* do not perform lazy search above this match length */
120
+ ush nice_length; /* quit search above this match length */
121
+ ush max_chain;
122
+ compress_func func;
123
+ } config;
124
+
125
+ #ifdef FASTEST
126
+ local const config configuration_table[2] = {
127
+ /* good lazy nice chain */
128
+ /* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */
129
+ /* 1 */ {4, 4, 8, 4, deflate_fast}}; /* max speed, no lazy matches */
130
+ #else
131
+ local const config configuration_table[10] = {
132
+ /* good lazy nice chain */
133
+ /* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */
134
+ /* 1 */ {4, 4, 8, 4, deflate_fast}, /* max speed, no lazy matches */
135
+ /* 2 */ {4, 5, 16, 8, deflate_fast},
136
+ /* 3 */ {4, 6, 32, 32, deflate_fast},
137
+
138
+ /* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */
139
+ /* 5 */ {8, 16, 32, 32, deflate_slow},
140
+ /* 6 */ {8, 16, 128, 128, deflate_slow},
141
+ /* 7 */ {8, 32, 128, 256, deflate_slow},
142
+ /* 8 */ {32, 128, 258, 1024, deflate_slow},
143
+ /* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* max compression */
144
+ #endif
145
+
146
+ /* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
147
+ * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
148
+ * meaning.
149
+ */
150
+
151
+ #define EQUAL 0
152
+ /* result of memcmp for equal strings */
153
+
154
+ #ifndef NO_DUMMY_DECL
155
+ struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
156
+ #endif
157
+
158
+ /* ===========================================================================
159
+ * Update a hash value with the given input byte
160
+ * IN assertion: all calls to to UPDATE_HASH are made with consecutive
161
+ * input characters, so that a running hash key can be computed from the
162
+ * previous key instead of complete recalculation each time.
163
+ */
164
+ #define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
165
+
166
+
167
+ /* ===========================================================================
168
+ * Insert string str in the dictionary and set match_head to the previous head
169
+ * of the hash chain (the most recent string with same hash key). Return
170
+ * the previous length of the hash chain.
171
+ * If this file is compiled with -DFASTEST, the compression level is forced
172
+ * to 1, and no hash chains are maintained.
173
+ * IN assertion: all calls to to INSERT_STRING are made with consecutive
174
+ * input characters and the first MIN_MATCH bytes of str are valid
175
+ * (except for the last MIN_MATCH-1 bytes of the input file).
176
+ */
177
+ #ifdef FASTEST
178
+ #define INSERT_STRING(s, str, match_head) \
179
+ (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
180
+ match_head = s->head[s->ins_h], \
181
+ s->head[s->ins_h] = (Pos)(str))
182
+ #else
183
+ #define INSERT_STRING(s, str, match_head) \
184
+ (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
185
+ match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \
186
+ s->head[s->ins_h] = (Pos)(str))
187
+ #endif
188
+
189
+ /* ===========================================================================
190
+ * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
191
+ * prev[] will be initialized on the fly.
192
+ */
193
+ #define CLEAR_HASH(s) \
194
+ s->head[s->hash_size-1] = NIL; \
195
+ zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
196
+
197
+ /* ========================================================================= */
198
+ int ZEXPORT deflateInit_(strm, level, version, stream_size)
199
+ z_streamp strm;
200
+ int level;
201
+ const char *version;
202
+ int stream_size;
203
+ {
204
+ return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL,
205
+ Z_DEFAULT_STRATEGY, version, stream_size);
206
+ /* To do: ignore strm->next_in if we use it as window */
207
+ }
208
+
209
+ /* ========================================================================= */
210
+ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
211
+ version, stream_size)
212
+ z_streamp strm;
213
+ int level;
214
+ int method;
215
+ int windowBits;
216
+ int memLevel;
217
+ int strategy;
218
+ const char *version;
219
+ int stream_size;
220
+ {
221
+ deflate_state *s;
222
+ int wrap = 1;
223
+ static const char my_version[] = ZLIB_VERSION;
224
+
225
+ ushf *overlay;
226
+ /* We overlay pending_buf and d_buf+l_buf. This works since the average
227
+ * output size for (length,distance) codes is <= 24 bits.
228
+ */
229
+
230
+ if (version == Z_NULL || version[0] != my_version[0] ||
231
+ stream_size != sizeof(z_stream)) {
232
+ return Z_VERSION_ERROR;
233
+ }
234
+ if (strm == Z_NULL) return Z_STREAM_ERROR;
235
+
236
+ strm->msg = Z_NULL;
237
+ if (strm->zalloc == (alloc_func)0) {
238
+ strm->zalloc = zcalloc;
239
+ strm->opaque = (voidpf)0;
240
+ }
241
+ if (strm->zfree == (free_func)0) strm->zfree = zcfree;
242
+
243
+ #ifdef FASTEST
244
+ if (level != 0) level = 1;
245
+ #else
246
+ if (level == Z_DEFAULT_COMPRESSION) level = 6;
247
+ #endif
248
+
249
+ if (windowBits < 0) { /* suppress zlib wrapper */
250
+ wrap = 0;
251
+ windowBits = -windowBits;
252
+ }
253
+ #ifdef GZIP
254
+ else if (windowBits > 15) {
255
+ wrap = 2; /* write gzip wrapper instead */
256
+ windowBits -= 16;
257
+ }
258
+ #endif
259
+ if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
260
+ windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
261
+ strategy < 0 || strategy > Z_FIXED) {
262
+ return Z_STREAM_ERROR;
263
+ }
264
+ if (windowBits == 8) windowBits = 9; /* until 256-byte window bug fixed */
265
+ s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state));
266
+ if (s == Z_NULL) return Z_MEM_ERROR;
267
+ strm->state = (struct internal_state FAR *)s;
268
+ s->strm = strm;
269
+
270
+ s->wrap = wrap;
271
+ s->gzhead = Z_NULL;
272
+ s->w_bits = windowBits;
273
+ s->w_size = 1 << s->w_bits;
274
+ s->w_mask = s->w_size - 1;
275
+
276
+ s->hash_bits = memLevel + 7;
277
+ s->hash_size = 1 << s->hash_bits;
278
+ s->hash_mask = s->hash_size - 1;
279
+ s->hash_shift = ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
280
+
281
+ s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
282
+ s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos));
283
+ s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos));
284
+
285
+ s->high_water = 0; /* nothing written to s->window yet */
286
+
287
+ s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
288
+
289
+ overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2);
290
+ s->pending_buf = (uchf *) overlay;
291
+ s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L);
292
+
293
+ if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
294
+ s->pending_buf == Z_NULL) {
295
+ s->status = FINISH_STATE;
296
+ strm->msg = (char*)ERR_MSG(Z_MEM_ERROR);
297
+ deflateEnd (strm);
298
+ return Z_MEM_ERROR;
299
+ }
300
+ s->d_buf = overlay + s->lit_bufsize/sizeof(ush);
301
+ s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize;
302
+
303
+ s->level = level;
304
+ s->strategy = strategy;
305
+ s->method = (Byte)method;
306
+
307
+ return deflateReset(strm);
308
+ }
309
+
310
+ /* ========================================================================= */
311
+ int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
312
+ z_streamp strm;
313
+ const Bytef *dictionary;
314
+ uInt dictLength;
315
+ {
316
+ deflate_state *s;
317
+ uInt length = dictLength;
318
+ uInt n;
319
+ IPos hash_head = 0;
320
+
321
+ if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL ||
322
+ strm->state->wrap == 2 ||
323
+ (strm->state->wrap == 1 && strm->state->status != INIT_STATE))
324
+ return Z_STREAM_ERROR;
325
+
326
+ s = strm->state;
327
+ if (s->wrap)
328
+ strm->adler = adler32(strm->adler, dictionary, dictLength);
329
+
330
+ if (length < MIN_MATCH) return Z_OK;
331
+ if (length > s->w_size) {
332
+ length = s->w_size;
333
+ dictionary += dictLength - length; /* use the tail of the dictionary */
334
+ }
335
+ zmemcpy(s->window, dictionary, length);
336
+ s->strstart = length;
337
+ s->block_start = (long)length;
338
+
339
+ /* Insert all strings in the hash table (except for the last two bytes).
340
+ * s->lookahead stays null, so s->ins_h will be recomputed at the next
341
+ * call of fill_window.
342
+ */
343
+ s->ins_h = s->window[0];
344
+ UPDATE_HASH(s, s->ins_h, s->window[1]);
345
+ for (n = 0; n <= length - MIN_MATCH; n++) {
346
+ INSERT_STRING(s, n, hash_head);
347
+ }
348
+ if (hash_head) hash_head = 0; /* to make compiler happy */
349
+ return Z_OK;
350
+ }
351
+
352
+ /* ========================================================================= */
353
+ int ZEXPORT deflateReset (strm)
354
+ z_streamp strm;
355
+ {
356
+ deflate_state *s;
357
+
358
+ if (strm == Z_NULL || strm->state == Z_NULL ||
359
+ strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0) {
360
+ return Z_STREAM_ERROR;
361
+ }
362
+
363
+ strm->total_in = strm->total_out = 0;
364
+ strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */
365
+ strm->data_type = Z_UNKNOWN;
366
+
367
+ s = (deflate_state *)strm->state;
368
+ s->pending = 0;
369
+ s->pending_out = s->pending_buf;
370
+
371
+ if (s->wrap < 0) {
372
+ s->wrap = -s->wrap; /* was made negative by deflate(..., Z_FINISH); */
373
+ }
374
+ s->status = s->wrap ? INIT_STATE : BUSY_STATE;
375
+ strm->adler =
376
+ #ifdef GZIP
377
+ s->wrap == 2 ? crc32(0L, Z_NULL, 0) :
378
+ #endif
379
+ adler32(0L, Z_NULL, 0);
380
+ s->last_flush = Z_NO_FLUSH;
381
+
382
+ _tr_init(s);
383
+ lm_init(s);
384
+
385
+ return Z_OK;
386
+ }
387
+
388
+ /* ========================================================================= */
389
+ int ZEXPORT deflateSetHeader (strm, head)
390
+ z_streamp strm;
391
+ gz_headerp head;
392
+ {
393
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
394
+ if (strm->state->wrap != 2) return Z_STREAM_ERROR;
395
+ strm->state->gzhead = head;
396
+ return Z_OK;
397
+ }
398
+
399
+ /* ========================================================================= */
400
+ int ZEXPORT deflatePrime (strm, bits, value)
401
+ z_streamp strm;
402
+ int bits;
403
+ int value;
404
+ {
405
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
406
+ strm->state->bi_valid = bits;
407
+ strm->state->bi_buf = (ush)(value & ((1 << bits) - 1));
408
+ return Z_OK;
409
+ }
410
+
411
+ /* ========================================================================= */
412
+ int ZEXPORT deflateParams(strm, level, strategy)
413
+ z_streamp strm;
414
+ int level;
415
+ int strategy;
416
+ {
417
+ deflate_state *s;
418
+ compress_func func;
419
+ int err = Z_OK;
420
+
421
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
422
+ s = strm->state;
423
+
424
+ #ifdef FASTEST
425
+ if (level != 0) level = 1;
426
+ #else
427
+ if (level == Z_DEFAULT_COMPRESSION) level = 6;
428
+ #endif
429
+ if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) {
430
+ return Z_STREAM_ERROR;
431
+ }
432
+ func = configuration_table[s->level].func;
433
+
434
+ if ((strategy != s->strategy || func != configuration_table[level].func) &&
435
+ strm->total_in != 0) {
436
+ /* Flush the last buffer: */
437
+ err = deflate(strm, Z_BLOCK);
438
+ }
439
+ if (s->level != level) {
440
+ s->level = level;
441
+ s->max_lazy_match = configuration_table[level].max_lazy;
442
+ s->good_match = configuration_table[level].good_length;
443
+ s->nice_match = configuration_table[level].nice_length;
444
+ s->max_chain_length = configuration_table[level].max_chain;
445
+ }
446
+ s->strategy = strategy;
447
+ return err;
448
+ }
449
+
450
+ /* ========================================================================= */
451
+ int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain)
452
+ z_streamp strm;
453
+ int good_length;
454
+ int max_lazy;
455
+ int nice_length;
456
+ int max_chain;
457
+ {
458
+ deflate_state *s;
459
+
460
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
461
+ s = strm->state;
462
+ s->good_match = good_length;
463
+ s->max_lazy_match = max_lazy;
464
+ s->nice_match = nice_length;
465
+ s->max_chain_length = max_chain;
466
+ return Z_OK;
467
+ }
468
+
469
+ /* =========================================================================
470
+ * For the default windowBits of 15 and memLevel of 8, this function returns
471
+ * a close to exact, as well as small, upper bound on the compressed size.
472
+ * They are coded as constants here for a reason--if the #define's are
473
+ * changed, then this function needs to be changed as well. The return
474
+ * value for 15 and 8 only works for those exact settings.
475
+ *
476
+ * For any setting other than those defaults for windowBits and memLevel,
477
+ * the value returned is a conservative worst case for the maximum expansion
478
+ * resulting from using fixed blocks instead of stored blocks, which deflate
479
+ * can emit on compressed data for some combinations of the parameters.
480
+ *
481
+ * This function could be more sophisticated to provide closer upper bounds for
482
+ * every combination of windowBits and memLevel. But even the conservative
483
+ * upper bound of about 14% expansion does not seem onerous for output buffer
484
+ * allocation.
485
+ */
486
+ uLong ZEXPORT deflateBound(strm, sourceLen)
487
+ z_streamp strm;
488
+ uLong sourceLen;
489
+ {
490
+ deflate_state *s;
491
+ uLong complen, wraplen;
492
+ Bytef *str;
493
+
494
+ /* conservative upper bound for compressed data */
495
+ complen = sourceLen +
496
+ ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 5;
497
+
498
+ /* if can't get parameters, return conservative bound plus zlib wrapper */
499
+ if (strm == Z_NULL || strm->state == Z_NULL)
500
+ return complen + 6;
501
+
502
+ /* compute wrapper length */
503
+ s = strm->state;
504
+ switch (s->wrap) {
505
+ case 0: /* raw deflate */
506
+ wraplen = 0;
507
+ break;
508
+ case 1: /* zlib wrapper */
509
+ wraplen = 6 + (s->strstart ? 4 : 0);
510
+ break;
511
+ case 2: /* gzip wrapper */
512
+ wraplen = 18;
513
+ if (s->gzhead != Z_NULL) { /* user-supplied gzip header */
514
+ if (s->gzhead->extra != Z_NULL)
515
+ wraplen += 2 + s->gzhead->extra_len;
516
+ str = s->gzhead->name;
517
+ if (str != Z_NULL)
518
+ do {
519
+ wraplen++;
520
+ } while (*str++);
521
+ str = s->gzhead->comment;
522
+ if (str != Z_NULL)
523
+ do {
524
+ wraplen++;
525
+ } while (*str++);
526
+ if (s->gzhead->hcrc)
527
+ wraplen += 2;
528
+ }
529
+ break;
530
+ default: /* for compiler happiness */
531
+ wraplen = 6;
532
+ }
533
+
534
+ /* if not default parameters, return conservative bound */
535
+ if (s->w_bits != 15 || s->hash_bits != 8 + 7)
536
+ return complen + wraplen;
537
+
538
+ /* default settings: return tight bound for that case */
539
+ return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
540
+ (sourceLen >> 25) + 13 - 6 + wraplen;
541
+ }
542
+
543
+ /* =========================================================================
544
+ * Put a short in the pending buffer. The 16-bit value is put in MSB order.
545
+ * IN assertion: the stream state is correct and there is enough room in
546
+ * pending_buf.
547
+ */
548
+ local void putShortMSB (s, b)
549
+ deflate_state *s;
550
+ uInt b;
551
+ {
552
+ put_byte(s, (Byte)(b >> 8));
553
+ put_byte(s, (Byte)(b & 0xff));
554
+ }
555
+
556
+ /* =========================================================================
557
+ * Flush as much pending output as possible. All deflate() output goes
558
+ * through this function so some applications may wish to modify it
559
+ * to avoid allocating a large strm->next_out buffer and copying into it.
560
+ * (See also read_buf()).
561
+ */
562
+ local void flush_pending(strm)
563
+ z_streamp strm;
564
+ {
565
+ unsigned len = strm->state->pending;
566
+
567
+ if (len > strm->avail_out) len = strm->avail_out;
568
+ if (len == 0) return;
569
+
570
+ zmemcpy(strm->next_out, strm->state->pending_out, len);
571
+ strm->next_out += len;
572
+ strm->state->pending_out += len;
573
+ strm->total_out += len;
574
+ strm->avail_out -= len;
575
+ strm->state->pending -= len;
576
+ if (strm->state->pending == 0) {
577
+ strm->state->pending_out = strm->state->pending_buf;
578
+ }
579
+ }
580
+
581
+ /* ========================================================================= */
582
+ int ZEXPORT deflate (strm, flush)
583
+ z_streamp strm;
584
+ int flush;
585
+ {
586
+ int old_flush; /* value of flush param for previous deflate call */
587
+ deflate_state *s;
588
+
589
+ if (strm == Z_NULL || strm->state == Z_NULL ||
590
+ flush > Z_BLOCK || flush < 0) {
591
+ return Z_STREAM_ERROR;
592
+ }
593
+ s = strm->state;
594
+
595
+ if (strm->next_out == Z_NULL ||
596
+ (strm->next_in == Z_NULL && strm->avail_in != 0) ||
597
+ (s->status == FINISH_STATE && flush != Z_FINISH)) {
598
+ ERR_RETURN(strm, Z_STREAM_ERROR);
599
+ }
600
+ if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
601
+
602
+ s->strm = strm; /* just in case */
603
+ old_flush = s->last_flush;
604
+ s->last_flush = flush;
605
+
606
+ /* Write the header */
607
+ if (s->status == INIT_STATE) {
608
+ #ifdef GZIP
609
+ if (s->wrap == 2) {
610
+ strm->adler = crc32(0L, Z_NULL, 0);
611
+ put_byte(s, 31);
612
+ put_byte(s, 139);
613
+ put_byte(s, 8);
614
+ if (s->gzhead == Z_NULL) {
615
+ put_byte(s, 0);
616
+ put_byte(s, 0);
617
+ put_byte(s, 0);
618
+ put_byte(s, 0);
619
+ put_byte(s, 0);
620
+ put_byte(s, s->level == 9 ? 2 :
621
+ (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
622
+ 4 : 0));
623
+ put_byte(s, OS_CODE);
624
+ s->status = BUSY_STATE;
625
+ }
626
+ else {
627
+ put_byte(s, (s->gzhead->text ? 1 : 0) +
628
+ (s->gzhead->hcrc ? 2 : 0) +
629
+ (s->gzhead->extra == Z_NULL ? 0 : 4) +
630
+ (s->gzhead->name == Z_NULL ? 0 : 8) +
631
+ (s->gzhead->comment == Z_NULL ? 0 : 16)
632
+ );
633
+ put_byte(s, (Byte)(s->gzhead->time & 0xff));
634
+ put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff));
635
+ put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff));
636
+ put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff));
637
+ put_byte(s, s->level == 9 ? 2 :
638
+ (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
639
+ 4 : 0));
640
+ put_byte(s, s->gzhead->os & 0xff);
641
+ if (s->gzhead->extra != Z_NULL) {
642
+ put_byte(s, s->gzhead->extra_len & 0xff);
643
+ put_byte(s, (s->gzhead->extra_len >> 8) & 0xff);
644
+ }
645
+ if (s->gzhead->hcrc)
646
+ strm->adler = crc32(strm->adler, s->pending_buf,
647
+ s->pending);
648
+ s->gzindex = 0;
649
+ s->status = EXTRA_STATE;
650
+ }
651
+ }
652
+ else
653
+ #endif
654
+ {
655
+ uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
656
+ uInt level_flags;
657
+
658
+ if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2)
659
+ level_flags = 0;
660
+ else if (s->level < 6)
661
+ level_flags = 1;
662
+ else if (s->level == 6)
663
+ level_flags = 2;
664
+ else
665
+ level_flags = 3;
666
+ header |= (level_flags << 6);
667
+ if (s->strstart != 0) header |= PRESET_DICT;
668
+ header += 31 - (header % 31);
669
+
670
+ s->status = BUSY_STATE;
671
+ putShortMSB(s, header);
672
+
673
+ /* Save the adler32 of the preset dictionary: */
674
+ if (s->strstart != 0) {
675
+ putShortMSB(s, (uInt)(strm->adler >> 16));
676
+ putShortMSB(s, (uInt)(strm->adler & 0xffff));
677
+ }
678
+ strm->adler = adler32(0L, Z_NULL, 0);
679
+ }
680
+ }
681
+ #ifdef GZIP
682
+ if (s->status == EXTRA_STATE) {
683
+ if (s->gzhead->extra != Z_NULL) {
684
+ uInt beg = s->pending; /* start of bytes to update crc */
685
+
686
+ while (s->gzindex < (s->gzhead->extra_len & 0xffff)) {
687
+ if (s->pending == s->pending_buf_size) {
688
+ if (s->gzhead->hcrc && s->pending > beg)
689
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
690
+ s->pending - beg);
691
+ flush_pending(strm);
692
+ beg = s->pending;
693
+ if (s->pending == s->pending_buf_size)
694
+ break;
695
+ }
696
+ put_byte(s, s->gzhead->extra[s->gzindex]);
697
+ s->gzindex++;
698
+ }
699
+ if (s->gzhead->hcrc && s->pending > beg)
700
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
701
+ s->pending - beg);
702
+ if (s->gzindex == s->gzhead->extra_len) {
703
+ s->gzindex = 0;
704
+ s->status = NAME_STATE;
705
+ }
706
+ }
707
+ else
708
+ s->status = NAME_STATE;
709
+ }
710
+ if (s->status == NAME_STATE) {
711
+ if (s->gzhead->name != Z_NULL) {
712
+ uInt beg = s->pending; /* start of bytes to update crc */
713
+ int val;
714
+
715
+ do {
716
+ if (s->pending == s->pending_buf_size) {
717
+ if (s->gzhead->hcrc && s->pending > beg)
718
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
719
+ s->pending - beg);
720
+ flush_pending(strm);
721
+ beg = s->pending;
722
+ if (s->pending == s->pending_buf_size) {
723
+ val = 1;
724
+ break;
725
+ }
726
+ }
727
+ val = s->gzhead->name[s->gzindex++];
728
+ put_byte(s, val);
729
+ } while (val != 0);
730
+ if (s->gzhead->hcrc && s->pending > beg)
731
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
732
+ s->pending - beg);
733
+ if (val == 0) {
734
+ s->gzindex = 0;
735
+ s->status = COMMENT_STATE;
736
+ }
737
+ }
738
+ else
739
+ s->status = COMMENT_STATE;
740
+ }
741
+ if (s->status == COMMENT_STATE) {
742
+ if (s->gzhead->comment != Z_NULL) {
743
+ uInt beg = s->pending; /* start of bytes to update crc */
744
+ int val;
745
+
746
+ do {
747
+ if (s->pending == s->pending_buf_size) {
748
+ if (s->gzhead->hcrc && s->pending > beg)
749
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
750
+ s->pending - beg);
751
+ flush_pending(strm);
752
+ beg = s->pending;
753
+ if (s->pending == s->pending_buf_size) {
754
+ val = 1;
755
+ break;
756
+ }
757
+ }
758
+ val = s->gzhead->comment[s->gzindex++];
759
+ put_byte(s, val);
760
+ } while (val != 0);
761
+ if (s->gzhead->hcrc && s->pending > beg)
762
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
763
+ s->pending - beg);
764
+ if (val == 0)
765
+ s->status = HCRC_STATE;
766
+ }
767
+ else
768
+ s->status = HCRC_STATE;
769
+ }
770
+ if (s->status == HCRC_STATE) {
771
+ if (s->gzhead->hcrc) {
772
+ if (s->pending + 2 > s->pending_buf_size)
773
+ flush_pending(strm);
774
+ if (s->pending + 2 <= s->pending_buf_size) {
775
+ put_byte(s, (Byte)(strm->adler & 0xff));
776
+ put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
777
+ strm->adler = crc32(0L, Z_NULL, 0);
778
+ s->status = BUSY_STATE;
779
+ }
780
+ }
781
+ else
782
+ s->status = BUSY_STATE;
783
+ }
784
+ #endif
785
+
786
+ /* Flush as much pending output as possible */
787
+ if (s->pending != 0) {
788
+ flush_pending(strm);
789
+ if (strm->avail_out == 0) {
790
+ /* Since avail_out is 0, deflate will be called again with
791
+ * more output space, but possibly with both pending and
792
+ * avail_in equal to zero. There won't be anything to do,
793
+ * but this is not an error situation so make sure we
794
+ * return OK instead of BUF_ERROR at next call of deflate:
795
+ */
796
+ s->last_flush = -1;
797
+ return Z_OK;
798
+ }
799
+
800
+ /* Make sure there is something to do and avoid duplicate consecutive
801
+ * flushes. For repeated and useless calls with Z_FINISH, we keep
802
+ * returning Z_STREAM_END instead of Z_BUF_ERROR.
803
+ */
804
+ } else if (strm->avail_in == 0 && flush <= old_flush &&
805
+ flush != Z_FINISH) {
806
+ ERR_RETURN(strm, Z_BUF_ERROR);
807
+ }
808
+
809
+ /* User must not provide more input after the first FINISH: */
810
+ if (s->status == FINISH_STATE && strm->avail_in != 0) {
811
+ ERR_RETURN(strm, Z_BUF_ERROR);
812
+ }
813
+
814
+ /* Start a new block or continue the current one.
815
+ */
816
+ if (strm->avail_in != 0 || s->lookahead != 0 ||
817
+ (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
818
+ block_state bstate;
819
+
820
+ bstate = s->strategy == Z_HUFFMAN_ONLY ? deflate_huff(s, flush) :
821
+ (s->strategy == Z_RLE ? deflate_rle(s, flush) :
822
+ (*(configuration_table[s->level].func))(s, flush));
823
+
824
+ if (bstate == finish_started || bstate == finish_done) {
825
+ s->status = FINISH_STATE;
826
+ }
827
+ if (bstate == need_more || bstate == finish_started) {
828
+ if (strm->avail_out == 0) {
829
+ s->last_flush = -1; /* avoid BUF_ERROR next call, see above */
830
+ }
831
+ return Z_OK;
832
+ /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
833
+ * of deflate should use the same flush parameter to make sure
834
+ * that the flush is complete. So we don't have to output an
835
+ * empty block here, this will be done at next call. This also
836
+ * ensures that for a very small output buffer, we emit at most
837
+ * one empty block.
838
+ */
839
+ }
840
+ if (bstate == block_done) {
841
+ if (flush == Z_PARTIAL_FLUSH) {
842
+ _tr_align(s);
843
+ } else if (flush != Z_BLOCK) { /* FULL_FLUSH or SYNC_FLUSH */
844
+ _tr_stored_block(s, (char*)0, 0L, 0);
845
+ /* For a full flush, this empty block will be recognized
846
+ * as a special marker by inflate_sync().
847
+ */
848
+ if (flush == Z_FULL_FLUSH) {
849
+ CLEAR_HASH(s); /* forget history */
850
+ if (s->lookahead == 0) {
851
+ s->strstart = 0;
852
+ s->block_start = 0L;
853
+ }
854
+ }
855
+ }
856
+ flush_pending(strm);
857
+ if (strm->avail_out == 0) {
858
+ s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */
859
+ return Z_OK;
860
+ }
861
+ }
862
+ }
863
+ Assert(strm->avail_out > 0, "bug2");
864
+
865
+ if (flush != Z_FINISH) return Z_OK;
866
+ if (s->wrap <= 0) return Z_STREAM_END;
867
+
868
+ /* Write the trailer */
869
+ #ifdef GZIP
870
+ if (s->wrap == 2) {
871
+ put_byte(s, (Byte)(strm->adler & 0xff));
872
+ put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
873
+ put_byte(s, (Byte)((strm->adler >> 16) & 0xff));
874
+ put_byte(s, (Byte)((strm->adler >> 24) & 0xff));
875
+ put_byte(s, (Byte)(strm->total_in & 0xff));
876
+ put_byte(s, (Byte)((strm->total_in >> 8) & 0xff));
877
+ put_byte(s, (Byte)((strm->total_in >> 16) & 0xff));
878
+ put_byte(s, (Byte)((strm->total_in >> 24) & 0xff));
879
+ }
880
+ else
881
+ #endif
882
+ {
883
+ putShortMSB(s, (uInt)(strm->adler >> 16));
884
+ putShortMSB(s, (uInt)(strm->adler & 0xffff));
885
+ }
886
+ flush_pending(strm);
887
+ /* If avail_out is zero, the application will call deflate again
888
+ * to flush the rest.
889
+ */
890
+ if (s->wrap > 0) s->wrap = -s->wrap; /* write the trailer only once! */
891
+ return s->pending != 0 ? Z_OK : Z_STREAM_END;
892
+ }
893
+
894
+ /* ========================================================================= */
895
+ int ZEXPORT deflateEnd (strm)
896
+ z_streamp strm;
897
+ {
898
+ int status;
899
+
900
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
901
+
902
+ status = strm->state->status;
903
+ if (status != INIT_STATE &&
904
+ status != EXTRA_STATE &&
905
+ status != NAME_STATE &&
906
+ status != COMMENT_STATE &&
907
+ status != HCRC_STATE &&
908
+ status != BUSY_STATE &&
909
+ status != FINISH_STATE) {
910
+ return Z_STREAM_ERROR;
911
+ }
912
+
913
+ /* Deallocate in reverse order of allocations: */
914
+ TRY_FREE(strm, strm->state->pending_buf);
915
+ TRY_FREE(strm, strm->state->head);
916
+ TRY_FREE(strm, strm->state->prev);
917
+ TRY_FREE(strm, strm->state->window);
918
+
919
+ ZFREE(strm, strm->state);
920
+ strm->state = Z_NULL;
921
+
922
+ return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
923
+ }
924
+
925
+ /* =========================================================================
926
+ * Copy the source state to the destination state.
927
+ * To simplify the source, this is not supported for 16-bit MSDOS (which
928
+ * doesn't have enough memory anyway to duplicate compression states).
929
+ */
930
+ int ZEXPORT deflateCopy (dest, source)
931
+ z_streamp dest;
932
+ z_streamp source;
933
+ {
934
+ #ifdef MAXSEG_64K
935
+ return Z_STREAM_ERROR;
936
+ #else
937
+ deflate_state *ds;
938
+ deflate_state *ss;
939
+ ushf *overlay;
940
+
941
+
942
+ if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) {
943
+ return Z_STREAM_ERROR;
944
+ }
945
+
946
+ ss = source->state;
947
+
948
+ zmemcpy(dest, source, sizeof(z_stream));
949
+
950
+ ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
951
+ if (ds == Z_NULL) return Z_MEM_ERROR;
952
+ dest->state = (struct internal_state FAR *) ds;
953
+ zmemcpy(ds, ss, sizeof(deflate_state));
954
+ ds->strm = dest;
955
+
956
+ ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
957
+ ds->prev = (Posf *) ZALLOC(dest, ds->w_size, sizeof(Pos));
958
+ ds->head = (Posf *) ZALLOC(dest, ds->hash_size, sizeof(Pos));
959
+ overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2);
960
+ ds->pending_buf = (uchf *) overlay;
961
+
962
+ if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL ||
963
+ ds->pending_buf == Z_NULL) {
964
+ deflateEnd (dest);
965
+ return Z_MEM_ERROR;
966
+ }
967
+ /* following zmemcpy do not work for 16-bit MSDOS */
968
+ zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
969
+ zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos));
970
+ zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos));
971
+ zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
972
+
973
+ ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
974
+ ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush);
975
+ ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize;
976
+
977
+ ds->l_desc.dyn_tree = ds->dyn_ltree;
978
+ ds->d_desc.dyn_tree = ds->dyn_dtree;
979
+ ds->bl_desc.dyn_tree = ds->bl_tree;
980
+
981
+ return Z_OK;
982
+ #endif /* MAXSEG_64K */
983
+ }
984
+
985
+ /* ===========================================================================
986
+ * Read a new buffer from the current input stream, update the adler32
987
+ * and total number of bytes read. All deflate() input goes through
988
+ * this function so some applications may wish to modify it to avoid
989
+ * allocating a large strm->next_in buffer and copying from it.
990
+ * (See also flush_pending()).
991
+ */
992
+ local int read_buf(strm, buf, size)
993
+ z_streamp strm;
994
+ Bytef *buf;
995
+ unsigned size;
996
+ {
997
+ unsigned len = strm->avail_in;
998
+
999
+ if (len > size) len = size;
1000
+ if (len == 0) return 0;
1001
+
1002
+ strm->avail_in -= len;
1003
+
1004
+ if (strm->state->wrap == 1) {
1005
+ strm->adler = adler32(strm->adler, strm->next_in, len);
1006
+ }
1007
+ #ifdef GZIP
1008
+ else if (strm->state->wrap == 2) {
1009
+ strm->adler = crc32(strm->adler, strm->next_in, len);
1010
+ }
1011
+ #endif
1012
+ zmemcpy(buf, strm->next_in, len);
1013
+ strm->next_in += len;
1014
+ strm->total_in += len;
1015
+
1016
+ return (int)len;
1017
+ }
1018
+
1019
+ /* ===========================================================================
1020
+ * Initialize the "longest match" routines for a new zlib stream
1021
+ */
1022
+ local void lm_init (s)
1023
+ deflate_state *s;
1024
+ {
1025
+ s->window_size = (ulg)2L*s->w_size;
1026
+
1027
+ CLEAR_HASH(s);
1028
+
1029
+ /* Set the default configuration parameters:
1030
+ */
1031
+ s->max_lazy_match = configuration_table[s->level].max_lazy;
1032
+ s->good_match = configuration_table[s->level].good_length;
1033
+ s->nice_match = configuration_table[s->level].nice_length;
1034
+ s->max_chain_length = configuration_table[s->level].max_chain;
1035
+
1036
+ s->strstart = 0;
1037
+ s->block_start = 0L;
1038
+ s->lookahead = 0;
1039
+ s->match_length = s->prev_length = MIN_MATCH-1;
1040
+ s->match_available = 0;
1041
+ s->ins_h = 0;
1042
+ #ifndef FASTEST
1043
+ #ifdef ASMV
1044
+ match_init(); /* initialize the asm code */
1045
+ #endif
1046
+ #endif
1047
+ }
1048
+
1049
+ #ifndef FASTEST
1050
+ /* ===========================================================================
1051
+ * Set match_start to the longest match starting at the given string and
1052
+ * return its length. Matches shorter or equal to prev_length are discarded,
1053
+ * in which case the result is equal to prev_length and match_start is
1054
+ * garbage.
1055
+ * IN assertions: cur_match is the head of the hash chain for the current
1056
+ * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
1057
+ * OUT assertion: the match length is not greater than s->lookahead.
1058
+ */
1059
+ #ifndef ASMV
1060
+ /* For 80x86 and 680x0, an optimized version will be provided in match.asm or
1061
+ * match.S. The code will be functionally equivalent.
1062
+ */
1063
+ local uInt longest_match(s, cur_match)
1064
+ deflate_state *s;
1065
+ IPos cur_match; /* current match */
1066
+ {
1067
+ unsigned chain_length = s->max_chain_length;/* max hash chain length */
1068
+ register Bytef *scan = s->window + s->strstart; /* current string */
1069
+ register Bytef *match; /* matched string */
1070
+ register int len; /* length of current match */
1071
+ int best_len = s->prev_length; /* best match length so far */
1072
+ int nice_match = s->nice_match; /* stop if match long enough */
1073
+ IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
1074
+ s->strstart - (IPos)MAX_DIST(s) : NIL;
1075
+ /* Stop when cur_match becomes <= limit. To simplify the code,
1076
+ * we prevent matches with the string of window index 0.
1077
+ */
1078
+ Posf *prev = s->prev;
1079
+ uInt wmask = s->w_mask;
1080
+
1081
+ #ifdef UNALIGNED_OK
1082
+ /* Compare two bytes at a time. Note: this is not always beneficial.
1083
+ * Try with and without -DUNALIGNED_OK to check.
1084
+ */
1085
+ register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
1086
+ register ush scan_start = *(ushf*)scan;
1087
+ register ush scan_end = *(ushf*)(scan+best_len-1);
1088
+ #else
1089
+ register Bytef *strend = s->window + s->strstart + MAX_MATCH;
1090
+ register Byte scan_end1 = scan[best_len-1];
1091
+ register Byte scan_end = scan[best_len];
1092
+ #endif
1093
+
1094
+ /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
1095
+ * It is easy to get rid of this optimization if necessary.
1096
+ */
1097
+ Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
1098
+
1099
+ /* Do not waste too much time if we already have a good match: */
1100
+ if (s->prev_length >= s->good_match) {
1101
+ chain_length >>= 2;
1102
+ }
1103
+ /* Do not look for matches beyond the end of the input. This is necessary
1104
+ * to make deflate deterministic.
1105
+ */
1106
+ if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
1107
+
1108
+ Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
1109
+
1110
+ do {
1111
+ Assert(cur_match < s->strstart, "no future");
1112
+ match = s->window + cur_match;
1113
+
1114
+ /* Skip to next match if the match length cannot increase
1115
+ * or if the match length is less than 2. Note that the checks below
1116
+ * for insufficient lookahead only occur occasionally for performance
1117
+ * reasons. Therefore uninitialized memory will be accessed, and
1118
+ * conditional jumps will be made that depend on those values.
1119
+ * However the length of the match is limited to the lookahead, so
1120
+ * the output of deflate is not affected by the uninitialized values.
1121
+ */
1122
+ #if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
1123
+ /* This code assumes sizeof(unsigned short) == 2. Do not use
1124
+ * UNALIGNED_OK if your compiler uses a different size.
1125
+ */
1126
+ if (*(ushf*)(match+best_len-1) != scan_end ||
1127
+ *(ushf*)match != scan_start) continue;
1128
+
1129
+ /* It is not necessary to compare scan[2] and match[2] since they are
1130
+ * always equal when the other bytes match, given that the hash keys
1131
+ * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
1132
+ * strstart+3, +5, ... up to strstart+257. We check for insufficient
1133
+ * lookahead only every 4th comparison; the 128th check will be made
1134
+ * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
1135
+ * necessary to put more guard bytes at the end of the window, or
1136
+ * to check more often for insufficient lookahead.
1137
+ */
1138
+ Assert(scan[2] == match[2], "scan[2]?");
1139
+ scan++, match++;
1140
+ do {
1141
+ } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
1142
+ *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
1143
+ *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
1144
+ *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
1145
+ scan < strend);
1146
+ /* The funny "do {}" generates better code on most compilers */
1147
+
1148
+ /* Here, scan <= window+strstart+257 */
1149
+ Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
1150
+ if (*scan == *match) scan++;
1151
+
1152
+ len = (MAX_MATCH - 1) - (int)(strend-scan);
1153
+ scan = strend - (MAX_MATCH-1);
1154
+
1155
+ #else /* UNALIGNED_OK */
1156
+
1157
+ if (match[best_len] != scan_end ||
1158
+ match[best_len-1] != scan_end1 ||
1159
+ *match != *scan ||
1160
+ *++match != scan[1]) continue;
1161
+
1162
+ /* The check at best_len-1 can be removed because it will be made
1163
+ * again later. (This heuristic is not always a win.)
1164
+ * It is not necessary to compare scan[2] and match[2] since they
1165
+ * are always equal when the other bytes match, given that
1166
+ * the hash keys are equal and that HASH_BITS >= 8.
1167
+ */
1168
+ scan += 2, match++;
1169
+ Assert(*scan == *match, "match[2]?");
1170
+
1171
+ /* We check for insufficient lookahead only every 8th comparison;
1172
+ * the 256th check will be made at strstart+258.
1173
+ */
1174
+ do {
1175
+ } while (*++scan == *++match && *++scan == *++match &&
1176
+ *++scan == *++match && *++scan == *++match &&
1177
+ *++scan == *++match && *++scan == *++match &&
1178
+ *++scan == *++match && *++scan == *++match &&
1179
+ scan < strend);
1180
+
1181
+ Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
1182
+
1183
+ len = MAX_MATCH - (int)(strend - scan);
1184
+ scan = strend - MAX_MATCH;
1185
+
1186
+ #endif /* UNALIGNED_OK */
1187
+
1188
+ if (len > best_len) {
1189
+ s->match_start = cur_match;
1190
+ best_len = len;
1191
+ if (len >= nice_match) break;
1192
+ #ifdef UNALIGNED_OK
1193
+ scan_end = *(ushf*)(scan+best_len-1);
1194
+ #else
1195
+ scan_end1 = scan[best_len-1];
1196
+ scan_end = scan[best_len];
1197
+ #endif
1198
+ }
1199
+ } while ((cur_match = prev[cur_match & wmask]) > limit
1200
+ && --chain_length != 0);
1201
+
1202
+ if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
1203
+ return s->lookahead;
1204
+ }
1205
+ #endif /* ASMV */
1206
+
1207
+ #else /* FASTEST */
1208
+
1209
+ /* ---------------------------------------------------------------------------
1210
+ * Optimized version for FASTEST only
1211
+ */
1212
+ local uInt longest_match(s, cur_match)
1213
+ deflate_state *s;
1214
+ IPos cur_match; /* current match */
1215
+ {
1216
+ register Bytef *scan = s->window + s->strstart; /* current string */
1217
+ register Bytef *match; /* matched string */
1218
+ register int len; /* length of current match */
1219
+ register Bytef *strend = s->window + s->strstart + MAX_MATCH;
1220
+
1221
+ /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
1222
+ * It is easy to get rid of this optimization if necessary.
1223
+ */
1224
+ Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
1225
+
1226
+ Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
1227
+
1228
+ Assert(cur_match < s->strstart, "no future");
1229
+
1230
+ match = s->window + cur_match;
1231
+
1232
+ /* Return failure if the match length is less than 2:
1233
+ */
1234
+ if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1;
1235
+
1236
+ /* The check at best_len-1 can be removed because it will be made
1237
+ * again later. (This heuristic is not always a win.)
1238
+ * It is not necessary to compare scan[2] and match[2] since they
1239
+ * are always equal when the other bytes match, given that
1240
+ * the hash keys are equal and that HASH_BITS >= 8.
1241
+ */
1242
+ scan += 2, match += 2;
1243
+ Assert(*scan == *match, "match[2]?");
1244
+
1245
+ /* We check for insufficient lookahead only every 8th comparison;
1246
+ * the 256th check will be made at strstart+258.
1247
+ */
1248
+ do {
1249
+ } while (*++scan == *++match && *++scan == *++match &&
1250
+ *++scan == *++match && *++scan == *++match &&
1251
+ *++scan == *++match && *++scan == *++match &&
1252
+ *++scan == *++match && *++scan == *++match &&
1253
+ scan < strend);
1254
+
1255
+ Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
1256
+
1257
+ len = MAX_MATCH - (int)(strend - scan);
1258
+
1259
+ if (len < MIN_MATCH) return MIN_MATCH - 1;
1260
+
1261
+ s->match_start = cur_match;
1262
+ return (uInt)len <= s->lookahead ? (uInt)len : s->lookahead;
1263
+ }
1264
+
1265
+ #endif /* FASTEST */
1266
+
1267
+ #ifdef DEBUG
1268
+ /* ===========================================================================
1269
+ * Check that the match at match_start is indeed a match.
1270
+ */
1271
+ local void check_match(s, start, match, length)
1272
+ deflate_state *s;
1273
+ IPos start, match;
1274
+ int length;
1275
+ {
1276
+ /* check that the match is indeed a match */
1277
+ if (zmemcmp(s->window + match,
1278
+ s->window + start, length) != EQUAL) {
1279
+ fprintf(stderr, " start %u, match %u, length %d\n",
1280
+ start, match, length);
1281
+ do {
1282
+ fprintf(stderr, "%c%c", s->window[match++], s->window[start++]);
1283
+ } while (--length != 0);
1284
+ z_error("invalid match");
1285
+ }
1286
+ if (z_verbose > 1) {
1287
+ fprintf(stderr,"\\[%d,%d]", start-match, length);
1288
+ do { putc(s->window[start++], stderr); } while (--length != 0);
1289
+ }
1290
+ }
1291
+ #else
1292
+ # define check_match(s, start, match, length)
1293
+ #endif /* DEBUG */
1294
+
1295
+ /* ===========================================================================
1296
+ * Fill the window when the lookahead becomes insufficient.
1297
+ * Updates strstart and lookahead.
1298
+ *
1299
+ * IN assertion: lookahead < MIN_LOOKAHEAD
1300
+ * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
1301
+ * At least one byte has been read, or avail_in == 0; reads are
1302
+ * performed for at least two bytes (required for the zip translate_eol
1303
+ * option -- not supported here).
1304
+ */
1305
+ local void fill_window(s)
1306
+ deflate_state *s;
1307
+ {
1308
+ register unsigned n, m;
1309
+ register Posf *p;
1310
+ unsigned more; /* Amount of free space at the end of the window. */
1311
+ uInt wsize = s->w_size;
1312
+
1313
+ do {
1314
+ more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
1315
+
1316
+ /* Deal with !@#$% 64K limit: */
1317
+ if (sizeof(int) <= 2) {
1318
+ if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
1319
+ more = wsize;
1320
+
1321
+ } else if (more == (unsigned)(-1)) {
1322
+ /* Very unlikely, but possible on 16 bit machine if
1323
+ * strstart == 0 && lookahead == 1 (input done a byte at time)
1324
+ */
1325
+ more--;
1326
+ }
1327
+ }
1328
+
1329
+ /* If the window is almost full and there is insufficient lookahead,
1330
+ * move the upper half to the lower one to make room in the upper half.
1331
+ */
1332
+ if (s->strstart >= wsize+MAX_DIST(s)) {
1333
+
1334
+ zmemcpy(s->window, s->window+wsize, (unsigned)wsize);
1335
+ s->match_start -= wsize;
1336
+ s->strstart -= wsize; /* we now have strstart >= MAX_DIST */
1337
+ s->block_start -= (long) wsize;
1338
+
1339
+ /* Slide the hash table (could be avoided with 32 bit values
1340
+ at the expense of memory usage). We slide even when level == 0
1341
+ to keep the hash table consistent if we switch back to level > 0
1342
+ later. (Using level 0 permanently is not an optimal usage of
1343
+ zlib, so we don't care about this pathological case.)
1344
+ */
1345
+ n = s->hash_size;
1346
+ p = &s->head[n];
1347
+ do {
1348
+ m = *--p;
1349
+ *p = (Pos)(m >= wsize ? m-wsize : NIL);
1350
+ } while (--n);
1351
+
1352
+ n = wsize;
1353
+ #ifndef FASTEST
1354
+ p = &s->prev[n];
1355
+ do {
1356
+ m = *--p;
1357
+ *p = (Pos)(m >= wsize ? m-wsize : NIL);
1358
+ /* If n is not on any hash chain, prev[n] is garbage but
1359
+ * its value will never be used.
1360
+ */
1361
+ } while (--n);
1362
+ #endif
1363
+ more += wsize;
1364
+ }
1365
+ if (s->strm->avail_in == 0) return;
1366
+
1367
+ /* If there was no sliding:
1368
+ * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
1369
+ * more == window_size - lookahead - strstart
1370
+ * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
1371
+ * => more >= window_size - 2*WSIZE + 2
1372
+ * In the BIG_MEM or MMAP case (not yet supported),
1373
+ * window_size == input_size + MIN_LOOKAHEAD &&
1374
+ * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
1375
+ * Otherwise, window_size == 2*WSIZE so more >= 2.
1376
+ * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
1377
+ */
1378
+ Assert(more >= 2, "more < 2");
1379
+
1380
+ n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more);
1381
+ s->lookahead += n;
1382
+
1383
+ /* Initialize the hash value now that we have some input: */
1384
+ if (s->lookahead >= MIN_MATCH) {
1385
+ s->ins_h = s->window[s->strstart];
1386
+ UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
1387
+ #if MIN_MATCH != 3
1388
+ Call UPDATE_HASH() MIN_MATCH-3 more times
1389
+ #endif
1390
+ }
1391
+ /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
1392
+ * but this is not important since only literal bytes will be emitted.
1393
+ */
1394
+
1395
+ } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
1396
+
1397
+ /* If the WIN_INIT bytes after the end of the current data have never been
1398
+ * written, then zero those bytes in order to avoid memory check reports of
1399
+ * the use of uninitialized (or uninitialised as Julian writes) bytes by
1400
+ * the longest match routines. Update the high water mark for the next
1401
+ * time through here. WIN_INIT is set to MAX_MATCH since the longest match
1402
+ * routines allow scanning to strstart + MAX_MATCH, ignoring lookahead.
1403
+ */
1404
+ if (s->high_water < s->window_size) {
1405
+ ulg curr = s->strstart + (ulg)(s->lookahead);
1406
+ ulg init;
1407
+
1408
+ if (s->high_water < curr) {
1409
+ /* Previous high water mark below current data -- zero WIN_INIT
1410
+ * bytes or up to end of window, whichever is less.
1411
+ */
1412
+ init = s->window_size - curr;
1413
+ if (init > WIN_INIT)
1414
+ init = WIN_INIT;
1415
+ zmemzero(s->window + curr, (unsigned)init);
1416
+ s->high_water = curr + init;
1417
+ }
1418
+ else if (s->high_water < (ulg)curr + WIN_INIT) {
1419
+ /* High water mark at or above current data, but below current data
1420
+ * plus WIN_INIT -- zero out to current data plus WIN_INIT, or up
1421
+ * to end of window, whichever is less.
1422
+ */
1423
+ init = (ulg)curr + WIN_INIT - s->high_water;
1424
+ if (init > s->window_size - s->high_water)
1425
+ init = s->window_size - s->high_water;
1426
+ zmemzero(s->window + s->high_water, (unsigned)init);
1427
+ s->high_water += init;
1428
+ }
1429
+ }
1430
+ }
1431
+
1432
+ /* ===========================================================================
1433
+ * Flush the current block, with given end-of-file flag.
1434
+ * IN assertion: strstart is set to the end of the current match.
1435
+ */
1436
+ #define FLUSH_BLOCK_ONLY(s, last) { \
1437
+ _tr_flush_block(s, (s->block_start >= 0L ? \
1438
+ (charf *)&s->window[(unsigned)s->block_start] : \
1439
+ (charf *)Z_NULL), \
1440
+ (ulg)((long)s->strstart - s->block_start), \
1441
+ (last)); \
1442
+ s->block_start = s->strstart; \
1443
+ flush_pending(s->strm); \
1444
+ Tracev((stderr,"[FLUSH]")); \
1445
+ }
1446
+
1447
+ /* Same but force premature exit if necessary. */
1448
+ #define FLUSH_BLOCK(s, last) { \
1449
+ FLUSH_BLOCK_ONLY(s, last); \
1450
+ if (s->strm->avail_out == 0) return (last) ? finish_started : need_more; \
1451
+ }
1452
+
1453
+ /* ===========================================================================
1454
+ * Copy without compression as much as possible from the input stream, return
1455
+ * the current block state.
1456
+ * This function does not insert new strings in the dictionary since
1457
+ * uncompressible data is probably not useful. This function is used
1458
+ * only for the level=0 compression option.
1459
+ * NOTE: this function should be optimized to avoid extra copying from
1460
+ * window to pending_buf.
1461
+ */
1462
+ local block_state deflate_stored(s, flush)
1463
+ deflate_state *s;
1464
+ int flush;
1465
+ {
1466
+ /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
1467
+ * to pending_buf_size, and each stored block has a 5 byte header:
1468
+ */
1469
+ ulg max_block_size = 0xffff;
1470
+ ulg max_start;
1471
+
1472
+ if (max_block_size > s->pending_buf_size - 5) {
1473
+ max_block_size = s->pending_buf_size - 5;
1474
+ }
1475
+
1476
+ /* Copy as much as possible from input to output: */
1477
+ for (;;) {
1478
+ /* Fill the window as much as possible: */
1479
+ if (s->lookahead <= 1) {
1480
+
1481
+ Assert(s->strstart < s->w_size+MAX_DIST(s) ||
1482
+ s->block_start >= (long)s->w_size, "slide too late");
1483
+
1484
+ fill_window(s);
1485
+ if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more;
1486
+
1487
+ if (s->lookahead == 0) break; /* flush the current block */
1488
+ }
1489
+ Assert(s->block_start >= 0L, "block gone");
1490
+
1491
+ s->strstart += s->lookahead;
1492
+ s->lookahead = 0;
1493
+
1494
+ /* Emit a stored block if pending_buf will be full: */
1495
+ max_start = s->block_start + max_block_size;
1496
+ if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
1497
+ /* strstart == 0 is possible when wraparound on 16-bit machine */
1498
+ s->lookahead = (uInt)(s->strstart - max_start);
1499
+ s->strstart = (uInt)max_start;
1500
+ FLUSH_BLOCK(s, 0);
1501
+ }
1502
+ /* Flush if we may have to slide, otherwise block_start may become
1503
+ * negative and the data will be gone:
1504
+ */
1505
+ if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
1506
+ FLUSH_BLOCK(s, 0);
1507
+ }
1508
+ }
1509
+ FLUSH_BLOCK(s, flush == Z_FINISH);
1510
+ return flush == Z_FINISH ? finish_done : block_done;
1511
+ }
1512
+
1513
+ /* ===========================================================================
1514
+ * Compress as much as possible from the input stream, return the current
1515
+ * block state.
1516
+ * This function does not perform lazy evaluation of matches and inserts
1517
+ * new strings in the dictionary only for unmatched strings or for short
1518
+ * matches. It is used only for the fast compression options.
1519
+ */
1520
+ local block_state deflate_fast(s, flush)
1521
+ deflate_state *s;
1522
+ int flush;
1523
+ {
1524
+ IPos hash_head; /* head of the hash chain */
1525
+ int bflush; /* set if current block must be flushed */
1526
+
1527
+ for (;;) {
1528
+ /* Make sure that we always have enough lookahead, except
1529
+ * at the end of the input file. We need MAX_MATCH bytes
1530
+ * for the next match, plus MIN_MATCH bytes to insert the
1531
+ * string following the next match.
1532
+ */
1533
+ if (s->lookahead < MIN_LOOKAHEAD) {
1534
+ fill_window(s);
1535
+ if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
1536
+ return need_more;
1537
+ }
1538
+ if (s->lookahead == 0) break; /* flush the current block */
1539
+ }
1540
+
1541
+ /* Insert the string window[strstart .. strstart+2] in the
1542
+ * dictionary, and set hash_head to the head of the hash chain:
1543
+ */
1544
+ hash_head = NIL;
1545
+ if (s->lookahead >= MIN_MATCH) {
1546
+ INSERT_STRING(s, s->strstart, hash_head);
1547
+ }
1548
+
1549
+ /* Find the longest match, discarding those <= prev_length.
1550
+ * At this point we have always match_length < MIN_MATCH
1551
+ */
1552
+ if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
1553
+ /* To simplify the code, we prevent matches with the string
1554
+ * of window index 0 (in particular we have to avoid a match
1555
+ * of the string with itself at the start of the input file).
1556
+ */
1557
+ s->match_length = longest_match (s, hash_head);
1558
+ /* longest_match() sets match_start */
1559
+ }
1560
+ if (s->match_length >= MIN_MATCH) {
1561
+ check_match(s, s->strstart, s->match_start, s->match_length);
1562
+
1563
+ _tr_tally_dist(s, s->strstart - s->match_start,
1564
+ s->match_length - MIN_MATCH, bflush);
1565
+
1566
+ s->lookahead -= s->match_length;
1567
+
1568
+ /* Insert new strings in the hash table only if the match length
1569
+ * is not too large. This saves time but degrades compression.
1570
+ */
1571
+ #ifndef FASTEST
1572
+ if (s->match_length <= s->max_insert_length &&
1573
+ s->lookahead >= MIN_MATCH) {
1574
+ s->match_length--; /* string at strstart already in table */
1575
+ do {
1576
+ s->strstart++;
1577
+ INSERT_STRING(s, s->strstart, hash_head);
1578
+ /* strstart never exceeds WSIZE-MAX_MATCH, so there are
1579
+ * always MIN_MATCH bytes ahead.
1580
+ */
1581
+ } while (--s->match_length != 0);
1582
+ s->strstart++;
1583
+ } else
1584
+ #endif
1585
+ {
1586
+ s->strstart += s->match_length;
1587
+ s->match_length = 0;
1588
+ s->ins_h = s->window[s->strstart];
1589
+ UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
1590
+ #if MIN_MATCH != 3
1591
+ Call UPDATE_HASH() MIN_MATCH-3 more times
1592
+ #endif
1593
+ /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
1594
+ * matter since it will be recomputed at next deflate call.
1595
+ */
1596
+ }
1597
+ } else {
1598
+ /* No match, output a literal byte */
1599
+ Tracevv((stderr,"%c", s->window[s->strstart]));
1600
+ _tr_tally_lit (s, s->window[s->strstart], bflush);
1601
+ s->lookahead--;
1602
+ s->strstart++;
1603
+ }
1604
+ if (bflush) FLUSH_BLOCK(s, 0);
1605
+ }
1606
+ FLUSH_BLOCK(s, flush == Z_FINISH);
1607
+ return flush == Z_FINISH ? finish_done : block_done;
1608
+ }
1609
+
1610
+ #ifndef FASTEST
1611
+ /* ===========================================================================
1612
+ * Same as above, but achieves better compression. We use a lazy
1613
+ * evaluation for matches: a match is finally adopted only if there is
1614
+ * no better match at the next window position.
1615
+ */
1616
+ local block_state deflate_slow(s, flush)
1617
+ deflate_state *s;
1618
+ int flush;
1619
+ {
1620
+ IPos hash_head; /* head of hash chain */
1621
+ int bflush; /* set if current block must be flushed */
1622
+
1623
+ /* Process the input block. */
1624
+ for (;;) {
1625
+ /* Make sure that we always have enough lookahead, except
1626
+ * at the end of the input file. We need MAX_MATCH bytes
1627
+ * for the next match, plus MIN_MATCH bytes to insert the
1628
+ * string following the next match.
1629
+ */
1630
+ if (s->lookahead < MIN_LOOKAHEAD) {
1631
+ fill_window(s);
1632
+ if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
1633
+ return need_more;
1634
+ }
1635
+ if (s->lookahead == 0) break; /* flush the current block */
1636
+ }
1637
+
1638
+ /* Insert the string window[strstart .. strstart+2] in the
1639
+ * dictionary, and set hash_head to the head of the hash chain:
1640
+ */
1641
+ hash_head = NIL;
1642
+ if (s->lookahead >= MIN_MATCH) {
1643
+ INSERT_STRING(s, s->strstart, hash_head);
1644
+ }
1645
+
1646
+ /* Find the longest match, discarding those <= prev_length.
1647
+ */
1648
+ s->prev_length = s->match_length, s->prev_match = s->match_start;
1649
+ s->match_length = MIN_MATCH-1;
1650
+
1651
+ if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
1652
+ s->strstart - hash_head <= MAX_DIST(s)) {
1653
+ /* To simplify the code, we prevent matches with the string
1654
+ * of window index 0 (in particular we have to avoid a match
1655
+ * of the string with itself at the start of the input file).
1656
+ */
1657
+ s->match_length = longest_match (s, hash_head);
1658
+ /* longest_match() sets match_start */
1659
+
1660
+ if (s->match_length <= 5 && (s->strategy == Z_FILTERED
1661
+ #if TOO_FAR <= 32767
1662
+ || (s->match_length == MIN_MATCH &&
1663
+ s->strstart - s->match_start > TOO_FAR)
1664
+ #endif
1665
+ )) {
1666
+
1667
+ /* If prev_match is also MIN_MATCH, match_start is garbage
1668
+ * but we will ignore the current match anyway.
1669
+ */
1670
+ s->match_length = MIN_MATCH-1;
1671
+ }
1672
+ }
1673
+ /* If there was a match at the previous step and the current
1674
+ * match is not better, output the previous match:
1675
+ */
1676
+ if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) {
1677
+ uInt max_insert = s->strstart + s->lookahead - MIN_MATCH;
1678
+ /* Do not insert strings in hash table beyond this. */
1679
+
1680
+ check_match(s, s->strstart-1, s->prev_match, s->prev_length);
1681
+
1682
+ _tr_tally_dist(s, s->strstart -1 - s->prev_match,
1683
+ s->prev_length - MIN_MATCH, bflush);
1684
+
1685
+ /* Insert in hash table all strings up to the end of the match.
1686
+ * strstart-1 and strstart are already inserted. If there is not
1687
+ * enough lookahead, the last two strings are not inserted in
1688
+ * the hash table.
1689
+ */
1690
+ s->lookahead -= s->prev_length-1;
1691
+ s->prev_length -= 2;
1692
+ do {
1693
+ if (++s->strstart <= max_insert) {
1694
+ INSERT_STRING(s, s->strstart, hash_head);
1695
+ }
1696
+ } while (--s->prev_length != 0);
1697
+ s->match_available = 0;
1698
+ s->match_length = MIN_MATCH-1;
1699
+ s->strstart++;
1700
+
1701
+ if (bflush) FLUSH_BLOCK(s, 0);
1702
+
1703
+ } else if (s->match_available) {
1704
+ /* If there was no match at the previous position, output a
1705
+ * single literal. If there was a match but the current match
1706
+ * is longer, truncate the previous match to a single literal.
1707
+ */
1708
+ Tracevv((stderr,"%c", s->window[s->strstart-1]));
1709
+ _tr_tally_lit(s, s->window[s->strstart-1], bflush);
1710
+ if (bflush) {
1711
+ FLUSH_BLOCK_ONLY(s, 0);
1712
+ }
1713
+ s->strstart++;
1714
+ s->lookahead--;
1715
+ if (s->strm->avail_out == 0) return need_more;
1716
+ } else {
1717
+ /* There is no previous match to compare with, wait for
1718
+ * the next step to decide.
1719
+ */
1720
+ s->match_available = 1;
1721
+ s->strstart++;
1722
+ s->lookahead--;
1723
+ }
1724
+ }
1725
+ Assert (flush != Z_NO_FLUSH, "no flush?");
1726
+ if (s->match_available) {
1727
+ Tracevv((stderr,"%c", s->window[s->strstart-1]));
1728
+ _tr_tally_lit(s, s->window[s->strstart-1], bflush);
1729
+ s->match_available = 0;
1730
+ }
1731
+ FLUSH_BLOCK(s, flush == Z_FINISH);
1732
+ return flush == Z_FINISH ? finish_done : block_done;
1733
+ }
1734
+ #endif /* FASTEST */
1735
+
1736
+ /* ===========================================================================
1737
+ * For Z_RLE, simply look for runs of bytes, generate matches only of distance
1738
+ * one. Do not maintain a hash table. (It will be regenerated if this run of
1739
+ * deflate switches away from Z_RLE.)
1740
+ */
1741
+ local block_state deflate_rle(s, flush)
1742
+ deflate_state *s;
1743
+ int flush;
1744
+ {
1745
+ int bflush; /* set if current block must be flushed */
1746
+ uInt prev; /* byte at distance one to match */
1747
+ Bytef *scan, *strend; /* scan goes up to strend for length of run */
1748
+
1749
+ for (;;) {
1750
+ /* Make sure that we always have enough lookahead, except
1751
+ * at the end of the input file. We need MAX_MATCH bytes
1752
+ * for the longest encodable run.
1753
+ */
1754
+ if (s->lookahead < MAX_MATCH) {
1755
+ fill_window(s);
1756
+ if (s->lookahead < MAX_MATCH && flush == Z_NO_FLUSH) {
1757
+ return need_more;
1758
+ }
1759
+ if (s->lookahead == 0) break; /* flush the current block */
1760
+ }
1761
+
1762
+ /* See how many times the previous byte repeats */
1763
+ s->match_length = 0;
1764
+ if (s->lookahead >= MIN_MATCH && s->strstart > 0) {
1765
+ scan = s->window + s->strstart - 1;
1766
+ prev = *scan;
1767
+ if (prev == *++scan && prev == *++scan && prev == *++scan) {
1768
+ strend = s->window + s->strstart + MAX_MATCH;
1769
+ do {
1770
+ } while (prev == *++scan && prev == *++scan &&
1771
+ prev == *++scan && prev == *++scan &&
1772
+ prev == *++scan && prev == *++scan &&
1773
+ prev == *++scan && prev == *++scan &&
1774
+ scan < strend);
1775
+ s->match_length = MAX_MATCH - (int)(strend - scan);
1776
+ if (s->match_length > s->lookahead)
1777
+ s->match_length = s->lookahead;
1778
+ }
1779
+ }
1780
+
1781
+ /* Emit match if have run of MIN_MATCH or longer, else emit literal */
1782
+ if (s->match_length >= MIN_MATCH) {
1783
+ check_match(s, s->strstart, s->strstart - 1, s->match_length);
1784
+
1785
+ _tr_tally_dist(s, 1, s->match_length - MIN_MATCH, bflush);
1786
+
1787
+ s->lookahead -= s->match_length;
1788
+ s->strstart += s->match_length;
1789
+ s->match_length = 0;
1790
+ } else {
1791
+ /* No match, output a literal byte */
1792
+ Tracevv((stderr,"%c", s->window[s->strstart]));
1793
+ _tr_tally_lit (s, s->window[s->strstart], bflush);
1794
+ s->lookahead--;
1795
+ s->strstart++;
1796
+ }
1797
+ if (bflush) FLUSH_BLOCK(s, 0);
1798
+ }
1799
+ FLUSH_BLOCK(s, flush == Z_FINISH);
1800
+ return flush == Z_FINISH ? finish_done : block_done;
1801
+ }
1802
+
1803
+ /* ===========================================================================
1804
+ * For Z_HUFFMAN_ONLY, do not look for matches. Do not maintain a hash table.
1805
+ * (It will be regenerated if this run of deflate switches away from Huffman.)
1806
+ */
1807
+ local block_state deflate_huff(s, flush)
1808
+ deflate_state *s;
1809
+ int flush;
1810
+ {
1811
+ int bflush; /* set if current block must be flushed */
1812
+
1813
+ for (;;) {
1814
+ /* Make sure that we have a literal to write. */
1815
+ if (s->lookahead == 0) {
1816
+ fill_window(s);
1817
+ if (s->lookahead == 0) {
1818
+ if (flush == Z_NO_FLUSH)
1819
+ return need_more;
1820
+ break; /* flush the current block */
1821
+ }
1822
+ }
1823
+
1824
+ /* Output a literal byte */
1825
+ s->match_length = 0;
1826
+ Tracevv((stderr,"%c", s->window[s->strstart]));
1827
+ _tr_tally_lit (s, s->window[s->strstart], bflush);
1828
+ s->lookahead--;
1829
+ s->strstart++;
1830
+ if (bflush) FLUSH_BLOCK(s, 0);
1831
+ }
1832
+ FLUSH_BLOCK(s, flush == Z_FINISH);
1833
+ return flush == Z_FINISH ? finish_done : block_done;
1834
+ }