lgrgic_palindrome_detector 0.1.0

data/vendor/cache/gems/ansi-1.5.0/lib/ansi/chain.rb

@@ -0,0 +1,50 @@
+require 'ansi/code'
+
+module ANSI
+
+  # ANSI::Chain was inspired by Kazuyoshi Tlacaelel's Isna library.
+  #
+  class Chain
+
+    #
+    def initialize(string)
+      @string = string.to_s
+      @codes  = []
+    end
+
+    #
+    attr :string
+
+    #
+    attr :codes
+
+    #
+    def method_missing(s, *a, &b)
+      if ANSI::CHART.key?(s)
+        @codes << s
+        self
+      else
+        super(s, *a, &b)
+      end
+    end
+
+    #
+    def to_s
+      if codes.empty?
+        result = @string
+      else
+        result = Code.ansi(@string, *codes)
+        codes.clear
+      end
+      result
+    end
+
+    #
+    def to_str
+      to_s
+    end
+
+  end
+
+end
+

data/vendor/cache/gems/ansi-1.5.0/lib/ansi/chart.rb

@@ -0,0 +1,100 @@
+module ANSI
+
+  # Table of codes used throughout the system.
+  #
+  # @see http://en.wikipedia.org/wiki/ANSI_escape_code
+  CHART = {
+    :clear            => 0,
+    :reset            => 0,
+    :bright           => 1,
+    :bold             => 1,
+    :faint            => 2,
+    :dark             => 2,
+    :italic           => 3,
+    :underline        => 4,
+    :underscore       => 4,
+    :blink            => 5,
+    :slow_blink       => 5,
+    :rapid            => 6,
+    :rapid_blink      => 6,
+    :invert           => 7,
+    :inverse          => 7,
+    :reverse          => 7,
+    :negative         => 7,
+    :swap             => 7,
+    :conceal          => 8,
+    :concealed        => 8,
+    :hide             => 9,
+    :strike           => 9,
+
+    :default_font     => 10,
+    :font_default     => 10,
+    :font0            => 10,
+    :font1            => 11,
+    :font2            => 12,
+    :font3            => 13,
+    :font4            => 14,
+    :font5            => 15,
+    :font6            => 16,
+    :font7            => 17,
+    :font8            => 18,
+    :font9            => 19,
+    :fraktur          => 20,
+    :bright_off       => 21,
+    :bold_off         => 21,
+    :double_underline => 21,
+    :clean            => 22,
+    :italic_off       => 23,
+    :fraktur_off      => 23,
+    :underline_off    => 24,
+    :blink_off        => 25,
+    :inverse_off      => 26,
+    :positive         => 26,
+    :conceal_off      => 27,
+    :show             => 27,
+    :reveal           => 27,
+    :crossed_off      => 29,
+    :crossed_out_off  => 29,
+
+    :black            => 30,
+    :red              => 31,
+    :green            => 32,
+    :yellow           => 33,
+    :blue             => 34,
+    :magenta          => 35,
+    :cyan             => 36,
+    :white            => 37,
+
+    :on_black         => 40,
+    :on_red           => 41,
+    :on_green         => 42,
+    :on_yellow        => 43,
+    :on_blue          => 44,
+    :on_magenta       => 45,
+    :on_cyan          => 46,
+    :on_white         => 47,
+
+    :frame            => 51,
+    :encircle         => 52,
+    :overline         => 53,
+    :frame_off        => 54,
+    :encircle_off     => 54,
+    :overline_off     => 55,
+  }
+
+  #
+  SPECIAL_CHART = {
+    :save             => "\e[s",     # Save current cursor positon.
+    :restore          => "\e[u",     # Restore saved cursor positon.
+    :clear_eol        => "\e[K",     # Clear to the end of the current line.
+    :clr              => "\e[K",     # Clear to the end of the current line.
+    :clear_right      => "\e[0K",    # Clear to the end of the current line.
+    :clear_left       => "\e[1K",    # Clear to the start of the current line.
+    :clear_line       => "\e[2K",    # Clear the entire current line.
+    :clear_screen     => "\e[2J",    # Clear the screen and move cursor to home.
+    :cls              => "\e[2J",    # Clear the screen and move cursor to home.
+    :cursor_hide      => "\e[?25l",  # Hide the cursor.
+    :cursor_show      => "\e[?25h"   # Show the cursor.
+  }
+
+end

data/vendor/cache/gems/ansi-1.5.0/lib/ansi/code.rb

@@ -0,0 +1,349 @@
+module ANSI
+
+  # Global variable can be used to prevent ANSI codes
+  # from being used in ANSI's methods that do so to string.
+  #
+  # NOTE: This has no effect on methods that return ANSI codes.
+  $ansi = true
+
+  if RUBY_PLATFORM =~ /(win32|w32)/
+    begin
+      require 'Win32/Console/ANSI'
+    rescue LoadError
+      warn "ansi: 'gem install win32console' to use color on Windows"
+      $ansi = false
+    end
+  end
+
+  require 'ansi/constants'
+
+  # TODO: up, down, right, left, etc could have yielding methods too?
+
+  # ANSI Codes
+  #
+  # Ansi::Code module makes it very easy to use ANSI codes.
+  # These are especially nice for beautifying shell output.
+  #
+  #   Ansi::Code.red + "Hello" + Ansi::Code.blue + "World"
+  #   => "\e[31mHello\e[34mWorld"
+  #
+  #   Ansi::Code.red{ "Hello" } + Ansi::Code.blue{ "World" }
+  #   => "\e[31mHello\e[0m\e[34mWorld\e[0m"
+  #
+  # IMPORTANT! Do not mixin Ansi::Code, instead use {ANSI::Mixin}.
+  #
+  # See {ANSI::CHART} for list of all supported codes.
+  #
+  module Code
+    extend self
+
+    # include ANSI Constants
+    include Constants
+
+    # Regexp for matching most ANSI codes.
+    PATTERN = /\e\[(\d+)m/
+
+    # ANSI clear code.
+    ENDCODE = "\e[0m"
+
+    # List of primary styles.
+    def self.styles
+      %w{bold dark italic underline underscore blink rapid reverse negative concealed strike}
+    end
+
+    # List of primary colors.
+    def self.colors
+      %w{black red green yellow blue magenta cyan white}
+    end
+
+    # Return ANSI code given a list of symbolic names.
+    def [](*codes)
+      code(*codes)
+    end
+
+    # Dynamically create color on color methods.
+    #
+    # @deprecated
+    #
+    colors.each do |color|
+      colors.each do |on_color|
+        module_eval <<-END, __FILE__, __LINE__
+          def #{color}_on_#{on_color}(string=nil)
+            if string
+              return string unless $ansi
+              #warn "use ANSI block notation for future versions"
+              return #{color.upcase} + ON_#{color.upcase} + string + ENDCODE
+            end
+            if block_given?
+              return yield unless $ansi
+              #{color.upcase} + ON_#{on_color.upcase} + yield.to_s + ENDCODE
+            else
+              #{color.upcase} + ON_#{on_color.upcase}
+            end
+          end
+        END
+      end
+    end
+
+    # Use method missing to dispatch ANSI code methods.
+    def method_missing(code, *args, &blk)
+      esc = nil
+
+      if CHART.key?(code)
+        esc = "\e[#{CHART[code]}m"
+      elsif SPECIAL_CHART.key?(code)
+        esc = SPECIAL_CHART[code]
+      end
+
+      if esc
+        if string = args.first
+          return string unless $ansi
+          #warn "use ANSI block notation for future versions"
+          return "#{esc}#{string}#{ENDCODE}"
+        end
+        if block_given?
+          return yield unless $ansi
+          return "#{esc}#{yield}#{ENDCODE}"
+        end
+        esc
+      else
+        super(code, *args, &blk)
+      end
+    end
+
+    # TODO: How to deal with position codes when $ansi is false?
+    # Should we raise an error or just not push the codes?
+    # For now, we will leave this it as is.
+
+    # Like +move+ but returns to original position after
+    # yielding the block.
+    def display(line, column=0) #:yield:
+      result = "\e[s"
+      result << "\e[#{line.to_i};#{column.to_i}H"
+      if block_given?
+        result << yield
+        result << "\e[u"
+      #elsif string
+      #  result << string
+      #  result << "\e[u"
+      end
+      result
+    end
+
+    # Move cursor to line and column.
+    def move(line, column=0)
+      "\e[#{line.to_i};#{column.to_i}H"
+    end
+
+    # Move cursor up a specified number of spaces.
+    def up(spaces=1)
+      "\e[#{spaces.to_i}A"
+    end
+
+    # Move cursor down a specified number of spaces.
+    def down(spaces=1)
+      "\e[#{spaces.to_i}B"
+    end
+
+    # Move cursor left a specified number of spaces.
+    def left(spaces=1)
+      "\e[#{spaces.to_i}D"
+    end
+    alias :back :left
+
+    # Move cursor right a specified number of spaces.
+    def right(spaces=1)
+      "\e[#{spaces.to_i}C"
+    end
+    alias :forward :right
+
+    ##
+    #def position
+    #  "\e[#;#R"
+    #end
+
+    # Apply ANSI codes to a first argument or block value.
+    #
+    # @example
+    #   ansi("Valentine", :red, :on_white)
+    #
+    # @example
+    #   ansi(:red, :on_white){ "Valentine" }
+    #
+    # @return [String]
+    #   String wrapped ANSI code.
+    #
+    def ansi(*codes) #:yield:
+      if block_given?
+        string = yield.to_s
+      else
+        # first argument must be the string
+        string = codes.shift.to_s
+      end
+
+      return string unless $ansi
+
+      c = code(*codes)
+
+      c + string.gsub(ENDCODE, ENDCODE + c) + ENDCODE
+    end
+
+    # TODO: Allow selective removal using *codes argument?
+
+    # Remove ANSI codes from string or block value.
+    #
+    # @param [String] string
+    #   String from which to remove ANSI codes.
+    #
+    # @return [String]
+    #   String wrapped ANSI code.
+    #
+    def unansi(string=nil) #:yield:
+      if block_given?
+        string = yield.to_s
+      else
+        string = string.to_s
+      end
+      string.gsub(PATTERN, '')
+    end
+
+    # Alias for #ansi method.
+    #
+    # @deprecated
+    #   Here for backward compatibility.
+    alias_method :style, :ansi
+
+    # Alias for #unansi method.
+    #
+    # @deprecated 
+    #   Here for backwards compatibility.
+    alias_method :unstyle, :unansi
+
+    # Alternate term for #ansi.
+    #
+    # @deprecated 
+    #   May change in future definition.
+    alias_method :color, :ansi
+
+    # Alias for unansi.
+    #
+    # @deprecated 
+    #   May change in future definition.
+    alias_method :uncolor, :unansi
+
+    # Look-up code from chart, or if Integer simply pass through.
+    # Also resolves :random and :on_random.
+    #
+    # @param codes [Array<Symbol,Integer]
+    #   Symbols or integers to convert to ANSI code.
+    #
+    # @return [String] ANSI code
+    def code(*codes)
+      list = []
+      codes.each do |code|
+        list << \
+          case code
+          when Integer
+            code
+          when Array
+            rgb_code(*code)
+          when :random, 'random'
+            random
+          when :on_random, 'on_random'
+            random(true)
+          when String
+            # TODO: code =~ /\d\d\d\d\d\d/ ?
+            if code.start_with?('#')
+              hex_code(code)
+            else
+              CHART[code.to_sym]
+            end
+          else
+            CHART[code.to_sym]
+          end
+      end
+      "\e[" + (list * ";") + "m"
+    end
+
+    # Provides a random primary ANSI color.
+    #
+    # @param background [Boolean]
+    #   Use `true` for background color, otherwise foreground color.
+    #
+    # @return [Integer] ANSI color number
+    def random(background=false)
+      (background ? 40 : 30) + rand(8)
+    end
+
+    # Creates an XTerm 256 color escape code from RGB value(s). The
+    # RGB value can be three arguments red, green and blue respectively
+    # each from 0 to 255, or the RGB value can be a single CSS-style
+    # hex string.
+    #
+    # @param background [Boolean]
+    #   Use `true` for background color, otherwise foreground color.
+    #
+    def rgb(*args)
+      case args.size
+      when 1, 2
+        hex, background = *args
+        esc = "\e[" + hex_code(hex, background) + "m"
+      when 3, 4
+        red, green, blue, background = *args
+        esc = "\e[" + rgb_code(red, green, blue, background) + "m"
+      else
+        raise ArgumentError
+      end
+
+      if block_given?
+        return yield.to_s unless $ansi
+        return "#{esc}#{yield}#{ENDCODE}"
+      else
+        return esc
+      end
+    end
+
+  #private
+
+    # Creates an xterm-256 color from rgb value.
+    #
+    # @param background [Boolean]
+    #   Use `true` for background color, otherwise foreground color.
+    #
+    def rgb_code(red, green, blue, background=false)
+      "#{background ? 48 : 38};5;#{rgb_256(red, green, blue)}"
+    end
+
+    # Creates an xterm-256 color code from a CSS-style color string.
+    #
+    # @param string [String]
+    #   Hex string in CSS style, .e.g. `#5FA0C2`.
+    #
+    # @param background [Boolean]
+    #   Use `true` for background color, otherwise foreground color.
+    #
+    def hex_code(string, background=false)
+      string.tr!('#','')
+      x = (string.size == 6 ? 2 : 1)
+      r, g, b = [0,1,2].map{ |i| string[i*x,2].to_i(16) }
+      rgb_code(r, g, b, background)
+    end
+
+    # Given red, green and blue values between 0 and 255, this method
+    # returns the closest XTerm 256 color value.
+    #
+    def rgb_256(r, g, b)
+      # TODO: what was rgb_valid for?
+      #r, g, b = [r, g, b].map{ |c| rgb_valid(c); (6 * (c.to_f / 256.0)).to_i }
+      r, g, b = [r, g, b].map{ |c| (6 * (c.to_f / 256.0)).to_i }
+      v = (r * 36 + g * 6 + b + 16).abs
+      raise ArgumentError, "RGB value is outside 0-255 range -- #{v}" if v > 255
+      v
+    end
+
+  end
+
+  #
+  extend Code
+end
+