lentil 0.0.1.pre

data/lib/generators/lentil/templates/devise.rb

@@ -0,0 +1,232 @@
+# Use this hook to configure devise mailer, warden hooks and so forth.
+# Many of these configuration options can be set straight in your model.
+Devise.setup do |config|
+  # ==> Mailer Configuration
+  # Configure the e-mail address which will be shown in Devise::Mailer,
+  # note that it will be overwritten if you use your own mailer class with default "from" parameter.
+  config.mailer_sender = "please-change-me-at-config-initializers-devise@example.com"
+
+  # Configure the class responsible to send e-mails.
+  # config.mailer = "Devise::Mailer"
+
+  # ==> ORM configuration
+  # Load and configure the ORM. Supports :active_record (default) and
+  # :mongoid (bson_ext recommended) by default. Other ORMs may be
+  # available as additional gems.
+  require 'devise/orm/active_record'
+
+  # ==> Configuration for any authentication mechanism
+  # Configure which keys are used when authenticating a user. The default is
+  # just :email. You can configure it to use [:username, :subdomain], so for
+  # authenticating a user, both parameters are required. Remember that those
+  # parameters are used only when authenticating and not when retrieving from
+  # session. If you need permissions, you should implement that in a before filter.
+  # You can also supply a hash where the value is a boolean determining whether
+  # or not authentication should be aborted when the value is not present.
+  # config.authentication_keys = [ :email ]
+
+  # Configure parameters from the request object used for authentication. Each entry
+  # given should be a request method and it will automatically be passed to the
+  # find_for_authentication method and considered in your model lookup. For instance,
+  # if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
+  # The same considerations mentioned for authentication_keys also apply to request_keys.
+  # config.request_keys = []
+
+  # Configure which authentication keys should be case-insensitive.
+  # These keys will be downcased upon creating or modifying a user and when used
+  # to authenticate or find a user. Default is :email.
+  config.case_insensitive_keys = [ :email ]
+
+  # Configure which authentication keys should have whitespace stripped.
+  # These keys will have whitespace before and after removed upon creating or
+  # modifying a user and when used to authenticate or find a user. Default is :email.
+  config.strip_whitespace_keys = [ :email ]
+
+  # Tell if authentication through request.params is enabled. True by default.
+  # It can be set to an array that will enable params authentication only for the
+  # given strategies, for example, `config.params_authenticatable = [:database]` will
+  # enable it only for database (email + password) authentication.
+  # config.params_authenticatable = true
+
+  # Tell if authentication through HTTP Basic Auth is enabled. False by default.
+  # It can be set to an array that will enable http authentication only for the
+  # given strategies, for example, `config.http_authenticatable = [:token]` will
+  # enable it only for token authentication.
+  # config.http_authenticatable = false
+
+  # If http headers should be returned for AJAX requests. True by default.
+  # config.http_authenticatable_on_xhr = true
+
+  # The realm used in Http Basic Authentication. "Application" by default.
+  # config.http_authentication_realm = "Application"
+
+  # It will change confirmation, password recovery and other workflows
+  # to behave the same regardless if the e-mail provided was right or wrong.
+  # Does not affect registerable.
+  # config.paranoid = true
+
+  # By default Devise will store the user in session. You can skip storage for
+  # :http_auth and :token_auth by adding those symbols to the array below.
+  # Notice that if you are skipping storage for all authentication paths, you
+  # may want to disable generating routes to Devise's sessions controller by
+  # passing :skip => :sessions to `devise_for` in your config/routes.rb
+  config.skip_session_storage = [:http_auth]
+
+  # ==> Configuration for :database_authenticatable
+  # For bcrypt, this is the cost for hashing the password and defaults to 10. If
+  # using other encryptors, it sets how many times you want the password re-encrypted.
+  #
+  # Limiting the stretches to just one in testing will increase the performance of
+  # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use
+  # a value less than 10 in other environments.
+  config.stretches = Rails.env.test? ? 1 : 10
+
+  # Setup a pepper to generate the encrypted password.
+  # config.pepper = "588d1185524f1bdac9283ece909b1789b9465813ffdae7ecccfaaf0986177eab39da09ef6198c62a213a97f5a83c2f90ce02a76138447de138c8220fc72d0a96"
+
+  # ==> Configuration for :confirmable
+  # A period that the user is allowed to access the website even without
+  # confirming his account. For instance, if set to 2.days, the user will be
+  # able to access the website for two days without confirming his account,
+  # access will be blocked just in the third day. Default is 0.days, meaning
+  # the user cannot access the website without confirming his account.
+  # config.allow_unconfirmed_access_for = 2.days
+
+  # If true, requires any email changes to be confirmed (exactly the same way as
+  # initial account confirmation) to be applied. Requires additional unconfirmed_email
+  # db field (see migrations). Until confirmed new email is stored in
+  # unconfirmed email column, and copied to email column on successful confirmation.
+  config.reconfirmable = true
+
+  # Defines which key will be used when confirming an account
+  # config.confirmation_keys = [ :email ]
+
+  # ==> Configuration for :rememberable
+  # The time the user will be remembered without asking for credentials again.
+  # config.remember_for = 2.weeks
+
+  # If true, extends the user's remember period when remembered via cookie.
+  # config.extend_remember_period = false
+
+  # Options to be passed to the created cookie. For instance, you can set
+  # :secure => true in order to force SSL only cookies.
+  # config.rememberable_options = {}
+
+  # ==> Configuration for :validatable
+  # Range for password length. Default is 6..128.
+  # config.password_length = 6..128
+
+  # Email regex used to validate email formats. It simply asserts that
+  # an one (and only one) @ exists in the given string. This is mainly
+  # to give user feedback and not to assert the e-mail validity.
+  # config.email_regexp = /\A[^@]+@[^@]+\z/
+
+  # ==> Configuration for :timeoutable
+  # The time you want to timeout the user session without activity. After this
+  # time the user will be asked for credentials again. Default is 30 minutes.
+  # config.timeout_in = 30.minutes
+  
+  # If true, expires auth token on session timeout.
+  # config.expire_auth_token_on_timeout = false
+
+  # ==> Configuration for :lockable
+  # Defines which strategy will be used to lock an account.
+  # :failed_attempts = Locks an account after a number of failed attempts to sign in.
+  # :none            = No lock strategy. You should handle locking by yourself.
+  # config.lock_strategy = :failed_attempts
+
+  # Defines which key will be used when locking and unlocking an account
+  # config.unlock_keys = [ :email ]
+
+  # Defines which strategy will be used to unlock an account.
+  # :email = Sends an unlock link to the user email
+  # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
+  # :both  = Enables both strategies
+  # :none  = No unlock strategy. You should handle unlocking by yourself.
+  # config.unlock_strategy = :both
+
+  # Number of authentication tries before locking an account if lock_strategy
+  # is failed attempts.
+  # config.maximum_attempts = 20
+
+  # Time interval to unlock the account if :time is enabled as unlock_strategy.
+  # config.unlock_in = 1.hour
+
+  # ==> Configuration for :recoverable
+  #
+  # Defines which key will be used when recovering the password for an account
+  # config.reset_password_keys = [ :email ]
+
+  # Time interval you can reset your password with a reset password key.
+  # Don't put a too small interval or your users won't have the time to
+  # change their passwords.
+  config.reset_password_within = 6.hours
+
+  # ==> Configuration for :encryptable
+  # Allow you to use another encryption algorithm besides bcrypt (default). You can use
+  # :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1,
+  # :authlogic_sha512 (then you should set stretches above to 20 for default behavior)
+  # and :restful_authentication_sha1 (then you should set stretches to 10, and copy
+  # REST_AUTH_SITE_KEY to pepper)
+  # config.encryptor = :sha512
+
+  # ==> Configuration for :token_authenticatable
+  # Defines name of the authentication token params key
+  # config.token_authentication_key = :auth_token
+
+  # ==> Scopes configuration
+  # Turn scoped views on. Before rendering "sessions/new", it will first check for
+  # "users/sessions/new". It's turned off by default because it's slower if you
+  # are using only default views.
+  # config.scoped_views = false
+
+  # Configure the default scope given to Warden. By default it's the first
+  # devise role declared in your routes (usually :user).
+  # config.default_scope = :user
+
+  # Set this configuration to false if you want /users/sign_out to sign out
+  # only the current scope. By default, Devise signs out all scopes.
+  # config.sign_out_all_scopes = true
+
+  # ==> Navigation configuration
+  # Lists the formats that should be treated as navigational. Formats like
+  # :html, should redirect to the sign in page when the user does not have
+  # access, but formats like :xml or :json, should return 401.
+  #
+  # If you have any extra navigational formats, like :iphone or :mobile, you
+  # should add them to the navigational formats lists.
+  #
+  # The "*/*" below is required to match Internet Explorer requests.
+  # config.navigational_formats = ["*/*", :html]
+
+  # The default HTTP method used to sign out a resource. Default is :delete.
+  config.sign_out_via = :delete
+
+  # ==> OmniAuth
+  # Add a new OmniAuth provider. Check the wiki for more information on setting
+  # up on your models and hooks.
+  # config.omniauth :github, 'APP_ID', 'APP_SECRET', :scope => 'user,public_repo'
+
+  # ==> Warden configuration
+  # If you want to use other strategies, that are not supported by Devise, or
+  # change the failure app, you can configure them inside the config.warden block.
+  #
+  # config.warden do |manager|
+  #   manager.intercept_401 = false
+  #   manager.default_strategies(:scope => :user).unshift :some_external_strategy
+  # end
+
+  # ==> Mountable engine configurations
+  # When using Devise inside an engine, let's call it `MyEngine`, and this engine
+  # is mountable, there are some extra configurations to be taken into account.
+  # The following options are available, assuming the engine is mounted as:
+  #
+  #     mount MyEngine, at: "/my_engine"
+  #
+  # The router that invoked `devise_for`, in the example above, would be:
+  # config.router_name = :my_engine
+  #
+  # When using omniauth, Devise cannot automatically set Omniauth path,
+  # so you need to do it manually. For the users scope, it would be:
+  # config.omniauth_path_prefix = "/my_engine/users/auth"
+end

data/lib/generators/lentil/templates/kaminari.rb

@@ -0,0 +1,3 @@
+Kaminari.configure do |config|
+  config.page_method_name = :per_page_kaminari
+end

data/lib/generators/lentil/templates/lentil_config.yml

@@ -0,0 +1,33 @@
+defaults: &defaults
+  instagram_client_id: "YOUR_CLIENT_ID"
+  instagram_client_secret: "YOUR_CLIENT_SECRET"
+  instagram_access_token: "YOUR_ACCESS_TOKEN_FROM_INSTAGRAM_OAUTH"
+  default_image_search_tag: "YOUR_TAG"
+  # If populated, the next three fields will appear at the end of page titles as "application_name - division_name - organization_name"
+  application_name: "Your base app page title"
+  division_name: "Division Name"
+  division_url: "http://example.com/division_url"
+  organization_name: "University name"
+  meta_description: "A short description to include in the meta description tag"
+  base_image_file_dir: "/path/to/directory/where/images/will/be/harvested"
+  donor_agreement_text: "The text for your donor agreement that will be submitted as a comment"
+  contact_email: "my_project@example.com"
+  feed_description: "Description of this feed"
+  # Uncomment to enable Google Analytics tracking
+  # google_analytics_tracker: "UA-XXXXXXXX-XX"
+
+development:
+  <<: *defaults
+  # Add or override config options here
+
+test:
+  <<: *defaults
+  # Add or override config options here
+
+staging:
+  <<: *defaults
+  # Add or override config options here
+
+production:
+  <<: *defaults
+  # Add or override config options here

data/lib/lentil.rb

@@ -0,0 +1,24 @@
+require "lentil/engine"
+require 'lentil/instagram_harvester'
+require 'lentil/popularity_calculator'
+require 'activeadmin'
+require 'meta_search'
+require 'formtastic'
+require 'instagram'
+require 'modernizr-rails'
+require 'fancybox2-rails'
+require 'whenever'
+require 'bootstrap-sass'
+require 'will_paginate'
+require 'state_machine'
+require 'oembed'
+require 'chosen-rails'
+require 'randumb'
+require 'lazing'
+require 'sitemap_generator'
+require 'compass-rails'
+require 'google-analytics-rails'
+require 'typhoeus'
+
+module Lentil
+end

data/lib/lentil/admin/admin_user.rb

@@ -0,0 +1,24 @@
+if defined?(ActiveAdmin)
+  ActiveAdmin.register Lentil::AdminUser do
+    config.batch_actions = false
+
+    index do
+      column :email
+      column :current_sign_in_at
+      column :last_sign_in_at
+      column :sign_in_count
+      default_actions
+    end
+
+    filter :email
+
+    form do |f|
+      f.inputs "Admin Details" do
+        f.input :email
+        f.input :password
+        f.input :password_confirmation
+      end
+      f.buttons
+    end
+  end
+end

data/lib/lentil/admin/dashboard.rb

@@ -0,0 +1,116 @@
+if defined?(ActiveAdmin)
+  ActiveAdmin.register_page "Dashboard" do
+
+    menu :priority => 1, :label => proc{ I18n.t("active_admin.dashboard") }
+
+    content :title => proc{ I18n.t("active_admin.dashboard") } do
+      # div :class => "blank_slate_container", :id => "dashboard_default_message" do
+      #   span :class => "blank_slate" do
+      #     span "Welcome to Active Admin. This is the default dashboard page."
+      #     small "To add dashboard sections, checkout 'app/admin/dashboards.rb'"
+      #   end
+      # end
+      #
+      columns do
+        images = Lentil::Image.where(state: Lentil::Image::States[:pending], moderator_id: nil).reverse.first(10)
+        column do
+          panel "New Images" do
+            if images.length > 0
+              table_for images.map do |image|
+                column("Image") {|image| image_tag(image.image_url, :class => "dash_thumbnail")}
+                column("Description") {|image| image.description}
+                column("Tags") {|image| image.tags.map{|tag| tag.name}.join(' | ')}
+              end
+            else
+              div :class => "blank_slate_container", :id => "dashboard_default_message" do
+                span :class => "blank_slate" do
+                  span "No New Images"
+                end
+              end
+            end
+          end
+        end
+
+        column do
+          images = Lentil::Image.joins(:flags).group("lentil_images.id HAVING count(lentil_flags.id) > 0").where(:second_moderation => false).limit(5)
+          panel "Recently Flagged", :id => 'recently_flagged' do
+            if images.length > 0
+              table_for images.map do |image|
+                column("Image")  do |image|
+                  link_to image_tag(image.image_url, :class => "dash_thumbnail"), admin_lentil_image_path(image)
+                end
+                column("Description") {|image| image.description}
+                column("Tags") {|image| image.tags.map{|tag| tag.name}.join(' | ')}
+              end
+            else
+              div :class => "blank_slate_container", :id => "dashboard_default_message" do
+                span :class => "blank_slate" do
+                  span "No Recently Flagged Images"
+                end
+              end
+            end
+          end
+
+          images = Lentil::Image.order("popular_score DESC").limit(5)
+          panel "Top Images" do
+            if images.length > 0
+              table_for images.map do |image|
+                column("Image") {|image| image_tag(image.image_url, :class => "dash_thumbnail")}
+                column("ID") {|image| image.id}
+                column("Likes") {|image| image.like_votes_count}
+                column("Staff Like") {|image| image.staff_like}
+                column("Win Pct") {|image| image.win_pct}
+                column("Score") {|image| image.popular_score}
+              end
+            else
+              div :class => "blank_slate_container", :id => "dashboard_default_message" do
+                span :class => "blank_slate" do
+                  span "No Top Images Found"
+                end
+              end
+            end
+          end
+
+          users = Lentil::User.order("images_count DESC").limit(5)
+          panel "Top Users" do
+            if users.length > 0
+              table_for users.map do |user|
+                column("Username") {|user| user.user_name}
+                column("Full Name") {|user| user.full_name}
+                column("Service") {|user| user.service.name}
+                column("Images Count") {|user| user.images_count}
+              end
+            else
+              div :class => "blank_slate_container", :id => "dashboard_default_message" do
+                span :class => "blank_slate" do
+                  span "No Users Found"
+                end
+              end
+            end
+          end
+        end
+      end # columns
+
+
+      # Here is an example of a simple dashboard with columns and panels.
+      #
+      # columns do
+      #   column do
+      #     panel "Recent Posts" do
+      #       ul do
+      #         Post.recent(5).map do |post|
+      #           li link_to(post.title, admin_post_path(post))
+      #         end
+      #       end
+      #     end
+      #   end
+
+      #   column do
+      #     panel "Info" do
+      #       para "Welcome to ActiveAdmin."
+      #     end
+      #   end
+      # end
+    end # content
+  end
+end

data/lib/lentil/admin/flags.rb

@@ -0,0 +1,17 @@
+if defined?(ActiveAdmin)
+  ActiveAdmin.register Lentil::Flag do
+    actions :index
+
+    filter :image, :as => :select, :collection => proc { Lentil::Image.joins(:flags).group("lentil_images.id").having("count(lentil_flags.id) > 0").map(&:id) }
+
+    config.batch_actions = false
+
+    index do
+      column "Image" do |flag|
+        link_to(image_tag(flag.image.image_url, :class => "moderation_thumbnail"), admin_lentil_image_path(flag.image),)
+      end
+      column :created_at
+      column :updated_at
+    end
+  end
+end